usb: gadget: udc: core: Offload usb_udc_vbus_handler processing
Subsystems (2)
PATCH v2 1/1 usb: gadget: udc: core: Offload usb_udc_vbus_handler processing
chipidea udc calls usb_udc_vbus_handler from udc_start gadget ops causing a deadlock. Avoid this by offloading usb_udc_vbus_handler processing.
============================================
WARNING: possible recursive locking detected 640-rc1-000-devel-00005-gcda3c69ebc14 #1 Not tainted
-------------------------------------------
CPU0
----lock(&udc->connect_lock);lock(&udc->connect_lock);
DEADLOCK
stack backtrace: CPU: 1 PID: 566 Comm: echo Not tainted 640-rc1-000-devel-00005-gcda3c69ebc14 #1 Hardware name: Freescale iMX7 Dual (Device Tree) unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x70/0xb0 dump_stack_lvl from __lock_acquire+0x924/0x22c4 __lock_acquire from lock_acquire+0x100/0x370 lock_acquire from __mutex_lock+0xa8/0xfb4 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from usb_udc_vbus_handler+0x1c/0x60 usb_udc_vbus_handler from ci_udc_start+0x74/0x9c ci_udc_start from gadget_bind_driver+0x130/0x230 gadget_bind_driver from really_probe+0xd8/0x3fc really_probe from __driver_probe_device+0x94/0x1f0 __driver_probe_device from driver_probe_device+0x2c/0xc4 driver_probe_device from __driver_attach+0x114/0x1cc __driver_attach from bus_for_each_dev+0x7c/0xcc bus_for_each_dev from bus_add_driver+0xd4/0x200 bus_add_driver from driver_register+0x7c/0x114 driver_register from usb_gadget_register_driver_owner+0x40/0xe0 usb_gadget_register_driver_owner from gadget_dev_desc_UDC_store+0xd4/0x110 gadget_dev_desc_UDC_store from configfs_write_iter+0xac/0x118 configfs_write_iter from vfs_write+0x1b4/0x40c vfs_write from ksys_write+0x70/0xf8 ksys_write from ret_fast_syscall+0x0/0x1c
---
Changes since v1:
- Address Alan Stern's comment on usb_udc_vbus_handler invocation from atomic context:
* vbus_events_lock is now a spinlock and allocations in
* usb_udc_vbus_handler are atomic now.
--- drivers/usb/gadget/udc/core.c | 63 +++++++++++++++++++++++++++++++---- 1 file changed, 57 insertions(+), 6 deletions(-)
drivers/usb/gadget/udc/core.c +57 -6
@@ -41,6 +41,9 @@ static const struct bus_type gadget_bus_type;* functions. usb_gadget_connect_locked, usb_gadget_disconnect_locked, * usb_udc_connect_control_locked, usb_gadget_udc_start_locked, usb_gadget_udc_stop_locked are * called with this lock held. +* @vbus_events: list head for processing vbus updates on usb_udc_vbus_handler. +* @vbus_events_lock: protects vbus_events list +* @vbus_work: work item that invokes usb_udc_connect_control_locked. * * This represents the internal data structure which is used by the UDC-class * to hold information about udc driver and gadget together.
@@ -53,6 +56,19 @@ struct usb_udc {bool vbus;bool started;struct mutex connect_lock; +struct list_head vbus_events; +spinlock_t vbus_events_lock; +struct work_struct vbus_work; +}; + +/** +* struct vbus_event - used to notify vbus updates posted through usb_udc_vbus_handler. +* @vbus_on: true when vbus is on. false other wise. +* @node: list node for maintaining a list of pending updates to be processed. +*/ +struct vbus_event { +bool vbus_on; +struct list_head node; };static struct class *udc_class;
@@ -1134,6 +1150,30 @@ static int usb_udc_connect_control_locked(struct usb_udc *udc) __must_hold(&udc-return ret; } +static void vbus_event_work (struct work_struct *work) +{ +struct vbus_event *event, *n; + struct usb_udc *udc = container_of(work, struct usb_udc, vbus_work); +unsigned long flags; + +spin_lock_irqsave (&udc->vbus_events_lock, flags); +list_for_each_entry_safe (event, n, &udc->vbus_events, node) { +list_del (&event->node); +/* OK to drop the lock here as it suffice to syncrhronize udc->vbus_events node +* retrieval and deletion against usb_udc_vbus_handler. usb_udc_vbus_handler does +* list_add_tail so n would be the same even if the lock is dropped. +*/ +spin_unlock_irqrestore (&udc->vbus_events_lock, flags); +mutex_lock (&udc->connect_lock); + udc->vbus = event->vbus_on; +usb_udc_connect_control_locked (udc); +kfree (event); +mutex_unlock (&udc->connect_lock); +spin_lock_irqsave (&udc->vbus_events_lock, flags); + } +spin_unlock_irqrestore (&udc->vbus_events_lock, flags); +} +/** * usb_udc_vbus_handler - updates the udc core vbus status, and try to * connect or disconnect gadget
@@ -1146,13 +1186,21 @@ static int usb_udc_connect_control_locked(struct usb_udc *udc) __must_hold(&udc-void usb_udc_vbus_handler (struct usb_gadget *gadget,bool status) {struct usb_udc *udc = gadget->udc; +struct vbus_event *vbus_event; +unsigned long flags; -mutex_lock (&udc->connect_lock); -if (udc) { - udc->vbus = status; -usb_udc_connect_control_locked (udc); - } -mutex_unlock (&udc->connect_lock); +if (!udc) +return ; + + vbus_event =kzalloc (sizeof (*vbus_event),GFP_ATOMIC ); +if (!vbus_event) +return ; + +spin_lock_irqsave (&udc->vbus_events_lock, flags); + vbus_event->vbus_on = status; +list_add_tail (&vbus_event->node, &udc->vbus_events); +spin_unlock_irqrestore (&udc->vbus_events_lock, flags); +schedule_work (&udc->vbus_work); }EXPORT_SYMBOL_GPL (usb_udc_vbus_handler);
@@ -1379,6 +1427,9 @@ int usb_add_gadget(struct usb_gadget *gadget) udc->gadget = gadget; gadget->udc = udc;mutex_init (&udc->connect_lock); +INIT_LIST_HEAD (&udc->vbus_events); +spin_lock_init (&udc->vbus_events_lock); +INIT_WORK (&udc->vbus_work, vbus_event_work); udc->started = false;
base-commit: a4422ff221429c600c3dc5d0394fb3738b89d040
Signature · 1 line
2.40.1.698.g37aff9b760-goog
Quoted 3 lines · Badhri Jagan Sridharan
chipidea udc calls
usb_udc_vbus_handlerfromudc_startgadget ops causing a deadlock. Avoid this by offloadingusb_udc_vbus_handlerprocessing.
Look, this is way overkill.
usb_udc_vbus_handler() has only two jobs to do: set udc->vbus and call usb_udc_connect_control(). Furthermore, it gets called from only two
drivers: chipidea and max3420.
Why not have the callers set udc->vbus themselves and then call usb_gadget_{dis}connect() directly? Then we could eliminate usb_udc_vbus_handler() entirely. And the unnecessary calls -- the ones causing deadlocks -- from within udc_start() and udc_stop() handlers can be removed with no further consequence.
This approach simplifies and removes code. Whereas your approach complicates and adds code for no good reason.
Alan Stern
Quoted 11 lines · Alan Stern
Quoted 3 lines · Badhri Jagan Sridharan
chipidea udc calls
usb_udc_vbus_handlerfromudc_startgadget ops causing a deadlock. Avoid this by offloadingusb_udc_vbus_handlerprocessing.Look, this is way overkill.
usb_udc_vbus_handler()has only two jobs to do: setudc->vbusand callusb_udc_connect_control(). Furthermore, it gets called from only two
drivers: chipidea and max3420.
Quoted 8 lines
Why not have the callers set
udc->vbusthemselves and then call usb_gadget_{dis}connect() directly? Then we could eliminateusb_udc_vbus_handler()entirely. And the unnecessary calls -- the ones causing deadlocks -- from withinudc_start()andudc_stop()handlers can be removed with no further consequence.This approach simplifies and removes code. Whereas your approach complicates and adds code for no good reason.
I changed my mind.
After looking more closely, I found the comment in gadget.h about ->disconnect() callbacks happening in interrupt context. This means we cannot use a mutex to protect the associated state, and therefore the connect_lock _must_ be a spinlock, not a mutex.
This also probably means that udc_start and udc_stop callbacks should not be invoked with the lock held. In fact, you might want to avoid using the lock at all with gadget_bind_driver() and gadget_unbind_driver() -- use it only in the functions that these routines call.
So it appears the whole connect_lock thing needs to be redesigned with these ideas in mind. However, it's still true that the UDC drivers shouldn't try to set the connection state from within their udc_start and udc_stop callbacks, because the core takes care of this automatically.
Alan Stern
Quoted 22 lines · Alan Stern
Quoted 11 lines · Alan Stern
Quoted 3 lines · Badhri Jagan Sridharan
chipidea udc calls
usb_udc_vbus_handlerfromudc_startgadget ops causing a deadlock. Avoid this by offloadingusb_udc_vbus_handlerprocessing.Look, this is way overkill.
usb_udc_vbus_handler()has only two jobs to do: setudc->vbusand callusb_udc_connect_control(). Furthermore, it gets called from only two
drivers: chipidea and max3420.Quoted 8 lines
Why not have the callers set
udc->vbusthemselves and then call usb_gadget_{dis}connect() directly? Then we could eliminateusb_udc_vbus_handler()entirely. And the unnecessary calls -- the ones causing deadlocks -- from withinudc_start()andudc_stop()handlers can be removed with no further consequence.This approach simplifies and removes code. Whereas your approach complicates and adds code for no good reason.
Quoted 6 lines
I changed my mind.
After looking more closely, I found the comment in
gadget.habout ->disconnect() callbacks happening in interrupt context. This means we cannot use a mutex to protect the associated state, and therefore theconnect_lock_must_ be a spinlock, not a mutex.
Quick observation so that I don't misunderstand.
I already see gadget->udc->driver->disconnect(gadget) being called with udc_lock being held.
mutex_lock(&udc_lock);
if (gadget->udc->driver)
gadget->udc->driver->disconnect(gadget);
mutex_unlock(&udc_lock);The below patch seems to have introduced it:1016fc0c096c USB: gadget: Fix obscure lockdep violation for udc_mutex
Are you referring to some other ->disconnect() callback ? If so, can you point me to which one ?
Quoted 7 lines
This also probably means that
udc_startandudc_stopcallbacks should not be invoked with the lock held. In fact, you might want to avoid using the lock at all withgadget_bind_driver()andgadget_unbind_driver()-- use it only in the functions that these routines call.
Quoted 7 lines
So it appears the whole
connect_lockthing needs to be redesigned with these ideas in mind. However, it's still true that the UDC drivers shouldn't try to set the connection state from within theirudc_startandudc_stopcallbacks, because the core takes care of this automatically.Alan Stern
Thanks for your inputs !
Badhri
Quoted 34 lines · Badhri Jagan Sridharan
Quoted 22 lines · Alan Stern
Quoted 11 lines · Alan Stern
Quoted 3 lines · Badhri Jagan Sridharan
chipidea udc calls
usb_udc_vbus_handlerfromudc_startgadget ops causing a deadlock. Avoid this by offloadingusb_udc_vbus_handlerprocessing.Look, this is way overkill.
usb_udc_vbus_handler()has only two jobs to do: setudc->vbusand callusb_udc_connect_control(). Furthermore, it gets called from only two
drivers: chipidea and max3420.Quoted 8 lines
Why not have the callers set
udc->vbusthemselves and then call usb_gadget_{dis}connect() directly? Then we could eliminateusb_udc_vbus_handler()entirely. And the unnecessary calls -- the ones causing deadlocks -- from withinudc_start()andudc_stop()handlers can be removed with no further consequence.This approach simplifies and removes code. Whereas your approach complicates and adds code for no good reason.
Quoted 6 lines
I changed my mind.
After looking more closely, I found the comment in
gadget.habout ->disconnect() callbacks happening in interrupt context. This means we cannot use a mutex to protect the associated state, and therefore theconnect_lock_must_ be a spinlock, not a mutex.Quick observation so that I don't misunderstand.
I already seegadget->udc->driver->disconnect(gadget)being called withudc_lockbeing held.
Quoted 7 lines
mutex_lock(&udc_lock); if (gadget->udc->driver) gadget->udc->driver->disconnect(gadget); mutex_unlock(&udc_lock);The below patch seems to have introduced it:
1016fc0c096cUSB: gadget: Fix obscure lockdep violation forudc_mutex
Hmmm... You're right about this. A big problem with the USB gadget framework is that it does not clearly state which routines have to run in process context and which have to run in interrupt/atomic context. People therefore don't think about it and frequently get it wrong.
So now the problem is that the UDC or transceiver driver may detect (typically in an interrupt handler) that VBUS power has appeared or disappeared, and it wants to tell the core to adjust the D+/D- pullup signals appropriately. The core notifies the UDC driver about this, and then in the case of a disconnection, it has to notify the gadget driver. But notifying the gadget driver requires process context for the udc_lock mutex, the ultimate reason being that disconnect notifications can race with gadget driver binding and unbinding.
If we could prevent those races in some other way then we wouldn't need to hold udc_lock in usb_gadget_disconnect(). This seems like a sensible thing to do in any case; the UDC core should never allow a connection to occur before a gadget driver is bound or after it is unbound.
The first approach that occurs to me is to add a boolean allow_connect flag to struct usb_udc, together with a global spinlock to synchronize access to it. Then usb_gadget_disconnect() could check the flag before calling driver->disconnect(), gadget_bind_driver() could set the flag before calling usb_udc_connect_control(), and gadget_unbind_driver() could clear the flag before calling usb_gadget_disconnect().
(Another possible approach would be to change gadget->deactivated into a counter. It would still need to be synchronized by a spinlock, however.)
This will simplify matters considerably. udc_lock can remain a mutex and the deadlock problem should go away.
Do you want to try adding allow_connect as described here or would you prefer that I do it?
(And in any case, we should prevent the udc_start and udc_stop callbacks in the chipidea and max3420 drivers from trying to update the connection status.)
Alan Stern
Hi Alan,
Thanks for taking the time out to share more details !
+1 on your comment: " A big problem with the USB gadget framework is that it does not clearly state which routines have to run in process context and which have to run in interrupt/atomic context."
I started to work on allow_connect and other suggestions that you had made. In one of the previous comments you had mentioned that the connect_lock should be a spinlock and not a mutex.
Right now there are four conditions that seem to be deciding whether pullup needs to be enabled or disabled through gadget->ops->pullup().
1. Gadget not deactivated through usb_gadget_deactivate()
2. Gadget has to be started through usb_gadget_udc_start(). soft_connect_store() can start/stop gadget.
3. usb_gadget has been connected through usb_gadget_connect(). This is assuming we are getting rid of usb_udc_vbus_handler.
4. allow_connect is true
I have so far identified two constraints here:
a. gadget->ops->pullup() can sleep in some implementations. For instance:
BUG: scheduling while atomic: init/1/0x00000002 .. [ 26.990631][ T1] Call trace: [ 26.993759][ T1] dump_backtrace+0x104/0x128 [ 26.998281][ T1] show_stack+0x20/0x30 [ 27.002279][ T1] dump_stack_lvl+0x6c/0x9c [ 27.006627][ T1] __schedule_bug+0x84/0xb4 [ 27.010973][ T1] __schedule+0x6f0/0xaec [ 27.015147][ T1] schedule+0xc8/0x134 [ 27.019059][ T1] schedule_timeout+0x98/0x134 [ 27.023666][ T1] msleep+0x34/0x4c [ 27.027317][ T1] dwc3_core_soft_reset+0xf0/0x354 [ 27.032273][ T1] dwc3_gadget_pullup+0xec/0x1d8 [ 27.037055][ T1] usb_gadget_pullup_update_locked+0xa0/0x1e0 [ 27.042967][ T1] udc_bind_to_driver+0x1e4/0x30c [ 27.047835][ T1] usb_gadget_probe_driver+0xd0/0x178 [ 27.053051][ T1] gadget_dev_desc_UDC_store+0xf0/0x13c [ 27.058442][ T1] configfs_write_iter+0x100/0x178 [ 27.063399][ T1] vfs_write+0x278/0x3c4 [ 27.067483][ T1] ksys_write+0x80/0xf4
b. gadget->ops->udc_start can also sleep in some implementations. For example:
[ 28.024255][ T1] BUG: scheduling while atomic: init/1/0x00000002 .... [ 28.324996][ T1] Call trace: [ 28.328126][ T1] dump_backtrace+0x104/0x128 [ 28.332647][ T1] show_stack+0x20/0x30 [ 28.336645][ T1] dump_stack_lvl+0x6c/0x9c [ 28.340993][ T1] __schedule_bug+0x84/0xb4 [ 28.345340][ T1] __schedule+0x6f0/0xaec [ 28.349513][ T1] schedule+0xc8/0x134 [ 28.353425][ T1] schedule_timeout+0x4c/0x134 [ 28.358033][ T1] wait_for_common+0xac/0x13c [ 28.362554][ T1] wait_for_completion_killable+0x20/0x3c [ 28.368118][ T1] __kthread_create_on_node+0xe4/0x1ec [ 28.373422][ T1] kthread_create_on_node+0x54/0x80 [ 28.378464][ T1] setup_irq_thread+0x50/0x108 [ 28.383072][ T1] __setup_irq+0x90/0x87c [ 28.387245][ T1] request_threaded_irq+0x144/0x180 [ 28.392287][ T1] dwc3_gadget_start+0x50/0xac [ 28.396866][ T1] udc_bind_to_driver+0x14c/0x31c [ 28.401763][ T1] usb_gadget_probe_driver+0xd0/0x178 [ 28.406980][ T1] gadget_dev_desc_UDC_store+0xf0/0x13c [ 28.412370][ T1] configfs_write_iter+0x100/0x178 [ 28.417325][ T1] vfs_write+0x278/0x3c4 [ 28.421411][ T1] ksys_write+0x80/0xf4
static int dwc3_gadget_start(struct usb_gadget *g,
struct usb_gadget_driver *driver)
{
struct dwc3 *dwc = gadget_to_dwc(g);
...
irq = dwc->irq_gadget;
ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
IRQF_SHARED, "dwc3", dwc->ev_buf);Given that "1016fc0c096c USB: gadget: Fix obscure lockdep violation for udc_mutex" has been there for a while and no one has reported issues so far, perhaps ->disconnect() callback is no longer being invoked in atomic context and the documentation is what that needs to be updated ?
Thanks,
Badhri
Quoted 85 lines · Alan Stern
Quoted 34 lines · Badhri Jagan Sridharan
Quoted 22 lines · Alan Stern
Quoted 11 lines · Alan Stern
Quoted 3 lines · Badhri Jagan Sridharan
chipidea udc calls
usb_udc_vbus_handlerfromudc_startgadget ops causing a deadlock. Avoid this by offloadingusb_udc_vbus_handlerprocessing.Look, this is way overkill.
usb_udc_vbus_handler()has only two jobs to do: setudc->vbusand callusb_udc_connect_control(). Furthermore, it gets called from only two
drivers: chipidea and max3420.Quoted 8 lines
Why not have the callers set
udc->vbusthemselves and then call usb_gadget_{dis}connect() directly? Then we could eliminateusb_udc_vbus_handler()entirely. And the unnecessary calls -- the ones causing deadlocks -- from withinudc_start()andudc_stop()handlers can be removed with no further consequence.This approach simplifies and removes code. Whereas your approach complicates and adds code for no good reason.
Quoted 6 lines
I changed my mind.
After looking more closely, I found the comment in
gadget.habout ->disconnect() callbacks happening in interrupt context. This means we cannot use a mutex to protect the associated state, and therefore theconnect_lock_must_ be a spinlock, not a mutex.Quick observation so that I don't misunderstand.
I already seegadget->udc->driver->disconnect(gadget)being called withudc_lockbeing held.Quoted 7 lines
mutex_lock(&udc_lock); if (gadget->udc->driver) gadget->udc->driver->disconnect(gadget); mutex_unlock(&udc_lock);The below patch seems to have introduced it:
1016fc0c096cUSB: gadget: Fix obscure lockdep violation forudc_mutexHmmm... You're right about this. A big problem with the USB gadget framework is that it does not clearly state which routines have to run in process context and which have to run in interrupt/atomic context. People therefore don't think about it and frequently get it wrong.
So now the problem is that the UDC or transceiver driver may detect (typically in an interrupt handler) that VBUS power has appeared or disappeared, and it wants to tell the core to adjust the D+/D- pullup signals appropriately. The core notifies the UDC driver about this, and then in the case of a disconnection, it has to notify the gadget driver. But notifying the gadget driver requires process context for the
udc_lockmutex, the ultimate reason being that disconnect notifications can race with gadget driver binding and unbinding.If we could prevent those races in some other way then we wouldn't need to hold
udc_lockinusb_gadget_disconnect(). This seems like a sensible thing to do in any case; the UDC core should never allow a connection to occur before a gadget driver is bound or after it is unbound.The first approach that occurs to me is to add a boolean
allow_connectflag to structusb_udc, together with a global spinlock to synchronize access to it. Thenusb_gadget_disconnect()could check the flag before callingdriver->disconnect(),gadget_bind_driver()could set the flag before callingusb_udc_connect_control(), andgadget_unbind_driver()could clear the flag before callingusb_gadget_disconnect().(Another possible approach would be to change
gadget->deactivatedinto a counter. It would still need to be synchronized by a spinlock, however.)This will simplify matters considerably.
udc_lockcan remain a mutex and the deadlock problem should go away.Do you want to try adding
allow_connectas described here or would you prefer that I do it?(And in any case, we should prevent the
udc_startandudc_stopcallbacks in the chipidea and max3420 drivers from trying to update the connection status.)Alan Stern
Quoted 24 lines · Badhri Jagan Sridharan
Hi Alan,
Thanks for taking the time out to share more details !
+1 on your comment: " A big problem with the USB gadget framework is that it does not clearly state which routines have to run in process context and which have to run in interrupt/atomic context."I started to work on
allow_connectand other suggestions that you had made. In one of the previous comments you had mentioned that theconnect_lockshould be a spinlock and not a mutex.
Right now there are four conditions that seem to be deciding whether pullup needs to be enabled or disabled throughgadget->ops->pullup().
1. Gadget not deactivated throughusb_gadget_deactivate()
2. Gadget has to be started throughusb_gadget_udc_start().soft_connect_store()can start/stop gadget.
3.usb_gadgethas been connected throughusb_gadget_connect(). This is assuming we are getting rid ofusb_udc_vbus_handler.
4.allow_connectis trueI have so far identified two constraints here:
a.gadget->ops->pullup()can sleep in some implementations. For instance:
Quoted 11 lines
BUG: scheduling while atomic: init/1/0x00000002 .. [ 26.990631][ T1] Call trace: [ 26.993759][ T1] dump_backtrace+0x104/0x128 [ 26.998281][ T1] show_stack+0x20/0x30 [ 27.002279][ T1] dump_stack_lvl+0x6c/0x9c [ 27.006627][ T1] __schedule_bug+0x84/0xb4 [ 27.010973][ T1] __schedule+0x6f0/0xaec [ 27.015147][ T1] schedule+0xc8/0x134 [ 27.019059][ T1] schedule_timeout+0x98/0x134 [ 27.023666][ T1] msleep+0x34/0x4c
Adding more context to make sure that I am more articulate. I am aware that alternatives such as mdelay can be used to work around in this specific instance. However, my concern is more around whether gadget->ops->pullup() of other implementations were designed as atomic. I only have dwc3 based hardware so can't test other udc implementations. Hence the concern.
Thanks,
Badhri
Quoted 141 lines
[ 27.027317][ T1] dwc3_core_soft_reset+0xf0/0x354 [ 27.032273][ T1] dwc3_gadget_pullup+0xec/0x1d8 [ 27.037055][ T1] usb_gadget_pullup_update_locked+0xa0/0x1e0 [ 27.042967][ T1] udc_bind_to_driver+0x1e4/0x30c [ 27.047835][ T1] usb_gadget_probe_driver+0xd0/0x178 [ 27.053051][ T1] gadget_dev_desc_UDC_store+0xf0/0x13c [ 27.058442][ T1] configfs_write_iter+0x100/0x178 [ 27.063399][ T1] vfs_write+0x278/0x3c4 [ 27.067483][ T1] ksys_write+0x80/0xf4b.
gadget->ops->udc_startcan also sleep in some implementations. For example:[ 28.024255][ T1] BUG: scheduling while atomic: init/1/0x00000002 .... [ 28.324996][ T1] Call trace: [ 28.328126][ T1] dump_backtrace+0x104/0x128 [ 28.332647][ T1] show_stack+0x20/0x30 [ 28.336645][ T1] dump_stack_lvl+0x6c/0x9c [ 28.340993][ T1] __schedule_bug+0x84/0xb4 [ 28.345340][ T1] __schedule+0x6f0/0xaec [ 28.349513][ T1] schedule+0xc8/0x134 [ 28.353425][ T1] schedule_timeout+0x4c/0x134 [ 28.358033][ T1] wait_for_common+0xac/0x13c [ 28.362554][ T1] wait_for_completion_killable+0x20/0x3c [ 28.368118][ T1] __kthread_create_on_node+0xe4/0x1ec [ 28.373422][ T1] kthread_create_on_node+0x54/0x80 [ 28.378464][ T1] setup_irq_thread+0x50/0x108 [ 28.383072][ T1] __setup_irq+0x90/0x87c [ 28.387245][ T1] request_threaded_irq+0x144/0x180 [ 28.392287][ T1] dwc3_gadget_start+0x50/0xac [ 28.396866][ T1] udc_bind_to_driver+0x14c/0x31c [ 28.401763][ T1] usb_gadget_probe_driver+0xd0/0x178 [ 28.406980][ T1] gadget_dev_desc_UDC_store+0xf0/0x13c [ 28.412370][ T1] configfs_write_iter+0x100/0x178 [ 28.417325][ T1] vfs_write+0x278/0x3c4 [ 28.421411][ T1] ksys_write+0x80/0xf4static int dwc3_gadget_start(struct
usb_gadget*g,
structusb_gadget_driver*driver){ struct dwc3 *dwc = gadget_to_dwc(g); ... irq = dwc->irq_gadget; ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt, IRQF_SHARED, "dwc3", dwc->ev_buf);Given that "
1016fc0c096cUSB: gadget: Fix obscure lockdep violation forudc_mutex" has been there for a while and no one has reported issues so far, perhaps ->disconnect() callback is no longer being invoked in atomic context and the documentation is what that needs to be updated ?Thanks,
BadhriQuoted 85 lines · Alan Stern
Quoted 34 lines · Badhri Jagan Sridharan
Quoted 22 lines · Alan Stern
Quoted 11 lines · Alan Stern
Quoted 3 lines · Badhri Jagan Sridharan
chipidea udc calls
usb_udc_vbus_handlerfromudc_startgadget ops causing a deadlock. Avoid this by offloadingusb_udc_vbus_handlerprocessing.Look, this is way overkill.
usb_udc_vbus_handler()has only two jobs to do: setudc->vbusand callusb_udc_connect_control(). Furthermore, it gets called from only two
drivers: chipidea and max3420.Quoted 8 lines
Why not have the callers set
udc->vbusthemselves and then call usb_gadget_{dis}connect() directly? Then we could eliminateusb_udc_vbus_handler()entirely. And the unnecessary calls -- the ones causing deadlocks -- from withinudc_start()andudc_stop()handlers can be removed with no further consequence.This approach simplifies and removes code. Whereas your approach complicates and adds code for no good reason.
Quoted 6 lines
I changed my mind.
After looking more closely, I found the comment in
gadget.habout ->disconnect() callbacks happening in interrupt context. This means we cannot use a mutex to protect the associated state, and therefore theconnect_lock_must_ be a spinlock, not a mutex.Quick observation so that I don't misunderstand.
I already seegadget->udc->driver->disconnect(gadget)being called withudc_lockbeing held.Quoted 7 lines
mutex_lock(&udc_lock); if (gadget->udc->driver) gadget->udc->driver->disconnect(gadget); mutex_unlock(&udc_lock);The below patch seems to have introduced it:
1016fc0c096cUSB: gadget: Fix obscure lockdep violation forudc_mutexHmmm... You're right about this. A big problem with the USB gadget framework is that it does not clearly state which routines have to run in process context and which have to run in interrupt/atomic context. People therefore don't think about it and frequently get it wrong.
So now the problem is that the UDC or transceiver driver may detect (typically in an interrupt handler) that VBUS power has appeared or disappeared, and it wants to tell the core to adjust the D+/D- pullup signals appropriately. The core notifies the UDC driver about this, and then in the case of a disconnection, it has to notify the gadget driver. But notifying the gadget driver requires process context for the
udc_lockmutex, the ultimate reason being that disconnect notifications can race with gadget driver binding and unbinding.If we could prevent those races in some other way then we wouldn't need to hold
udc_lockinusb_gadget_disconnect(). This seems like a sensible thing to do in any case; the UDC core should never allow a connection to occur before a gadget driver is bound or after it is unbound.The first approach that occurs to me is to add a boolean
allow_connectflag to structusb_udc, together with a global spinlock to synchronize access to it. Thenusb_gadget_disconnect()could check the flag before callingdriver->disconnect(),gadget_bind_driver()could set the flag before callingusb_udc_connect_control(), andgadget_unbind_driver()could clear the flag before callingusb_gadget_disconnect().(Another possible approach would be to change
gadget->deactivatedinto a counter. It would still need to be synchronized by a spinlock, however.)This will simplify matters considerably.
udc_lockcan remain a mutex and the deadlock problem should go away.Do you want to try adding
allow_connectas described here or would you prefer that I do it?(And in any case, we should prevent the
udc_startandudc_stopcallbacks in the chipidea and max3420 drivers from trying to update the connection status.)Alan Stern
Quoted 11 lines · Badhri Jagan Sridharan
Hi Alan,
Thanks for taking the time out to share more details !
+1 on your comment: " A big problem with the USB gadget framework is that it does not clearly state which routines have to run in process context and which have to run in interrupt/atomic context."I started to work on
allow_connectand other suggestions that you had made. In one of the previous comments you had mentioned that theconnect_lockshould be a spinlock and not a mutex.
Yeah, I changed my mind about that.
Quoted 24 lines
Right now there are four conditions that seem to be deciding whether pullup needs to be enabled or disabled through
gadget->ops->pullup().
1. Gadget not deactivated throughusb_gadget_deactivate()
2. Gadget has to be started throughusb_gadget_udc_start().soft_connect_store()can start/stop gadget.
3.usb_gadgethas been connected throughusb_gadget_connect(). This is assuming we are getting rid ofusb_udc_vbus_handler.
4.allow_connectis trueI have so far identified two constraints here:
a.gadget->ops->pullup()can sleep in some implementations. For instance:BUG: scheduling while atomic: init/1/0x00000002 .. [ 26.990631][ T1] Call trace: [ 26.993759][ T1] dump_backtrace+0x104/0x128 [ 26.998281][ T1] show_stack+0x20/0x30 [ 27.002279][ T1] dump_stack_lvl+0x6c/0x9c [ 27.006627][ T1] __schedule_bug+0x84/0xb4 [ 27.010973][ T1] __schedule+0x6f0/0xaec [ 27.015147][ T1] schedule+0xc8/0x134 [ 27.019059][ T1] schedule_timeout+0x98/0x134 [ 27.023666][ T1] msleep+0x34/0x4c [ 27.027317][ T1] dwc3_core_soft_reset+0xf0/0x354
Quoted 8 lines
[ 27.032273][ T1] dwc3_gadget_pullup+0xec/0x1d8 [ 27.037055][ T1] usb_gadget_pullup_update_locked+0xa0/0x1e0 [ 27.042967][ T1] udc_bind_to_driver+0x1e4/0x30c [ 27.047835][ T1] usb_gadget_probe_driver+0xd0/0x178 [ 27.053051][ T1] gadget_dev_desc_UDC_store+0xf0/0x13c [ 27.058442][ T1] configfs_write_iter+0x100/0x178 [ 27.063399][ T1] vfs_write+0x278/0x3c4 [ 27.067483][ T1] ksys_write+0x80/0xf4
What kernel was this trace made with? I don't see udc_bind_to_driver appearing anywhere in 6.4-rc3.
Quoted 36 lines
b.
gadget->ops->udc_startcan also sleep in some implementations. For example:[ 28.024255][ T1] BUG: scheduling while atomic: init/1/0x00000002 .... [ 28.324996][ T1] Call trace: [ 28.328126][ T1] dump_backtrace+0x104/0x128 [ 28.332647][ T1] show_stack+0x20/0x30 [ 28.336645][ T1] dump_stack_lvl+0x6c/0x9c [ 28.340993][ T1] __schedule_bug+0x84/0xb4 [ 28.345340][ T1] __schedule+0x6f0/0xaec [ 28.349513][ T1] schedule+0xc8/0x134 [ 28.353425][ T1] schedule_timeout+0x4c/0x134 [ 28.358033][ T1] wait_for_common+0xac/0x13c [ 28.362554][ T1] wait_for_completion_killable+0x20/0x3c [ 28.368118][ T1] __kthread_create_on_node+0xe4/0x1ec [ 28.373422][ T1] kthread_create_on_node+0x54/0x80 [ 28.378464][ T1] setup_irq_thread+0x50/0x108 [ 28.383072][ T1] __setup_irq+0x90/0x87c [ 28.387245][ T1] request_threaded_irq+0x144/0x180 [ 28.392287][ T1] dwc3_gadget_start+0x50/0xac [ 28.396866][ T1] udc_bind_to_driver+0x14c/0x31c [ 28.401763][ T1] usb_gadget_probe_driver+0xd0/0x178 [ 28.406980][ T1] gadget_dev_desc_UDC_store+0xf0/0x13c [ 28.412370][ T1] configfs_write_iter+0x100/0x178 [ 28.417325][ T1] vfs_write+0x278/0x3c4 [ 28.421411][ T1] ksys_write+0x80/0xf4static int dwc3_gadget_start(struct
usb_gadget*g,
structusb_gadget_driver*driver){ struct dwc3 *dwc = gadget_to_dwc(g); ... irq = dwc->irq_gadget; ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt, IRQF_SHARED, "dwc3", dwc->ev_buf);
Quoted 5 lines
Given that "
1016fc0c096cUSB: gadget: Fix obscure lockdep violation forudc_mutex" has been there for a while and no one has reported issues so far, perhaps ->disconnect() callback is no longer being invoked in atomic context and the documentation is what that needs to be updated ?
That's part of what I'm trying to figure out. However, some UDC drivers call ->disconnect() directly when they detect loss of VBUS power, instead of going through the core. So disconnect handlers will have remain capable of running in interrupt context until those UDC drivers are changed.
Getting back to your first point, it looks like we need to assume any routine that needs to communicate with the UDC hardware (such as the ->pullup callback used in usb_gadget_{dis}connect()) must always be called in process context. This means that usb_udc_connect_control() always has to run in process context, since it will do either a connect or a disconnect.
On the other hand, some routines -- in particular, usb_udc_vbus_handler() -- may be called by a UDC driver's interrupt handler and therefore may run in interrupt context. (This fact should be noted in that routine's kerneldoc, by the way.)
So here's the problem: usb_udc_vbus_handler() running in interrupt context calls usb_udc_connect_control(), which has to run in process context. And this is not just a simple issue caused by the ->disconnect() callback or use of mutexes; it's more fundamental.
I'm led to conclude that you were right to offload part of usb_udc_vbus_handler()'s job to a workqueue. It's an awkward thing to do, because you have to make sure to cancel the work item at times when it's no longer needed. But there doesn't seem to be any other choice.
Here's two related problems for you to think about:
1. Once gadget_unbind_driver() has called usb_gadget_disconnect(),
we don't want a VBUS change to cause usb_udc_vbus_handler()'s work routine to turn the pullup back on. How can we prevent this?
2. More generally, suppose usb_udc_vbus_handler() gets called at
exactly the same time that some other pathway (either gadget_bind_driver() or soft_connect_store()) tries to do a connect or disconnect. What should happen then?
Alan Stern
Thanks again Alan !
Quoted 49 lines · Alan Stern
Quoted 11 lines · Badhri Jagan Sridharan
Hi Alan,
Thanks for taking the time out to share more details !
+1 on your comment: " A big problem with the USB gadget framework is that it does not clearly state which routines have to run in process context and which have to run in interrupt/atomic context."I started to work on
allow_connectand other suggestions that you had made. In one of the previous comments you had mentioned that theconnect_lockshould be a spinlock and not a mutex.Yeah, I changed my mind about that.
Quoted 24 lines
Right now there are four conditions that seem to be deciding whether pullup needs to be enabled or disabled through
gadget->ops->pullup().
1. Gadget not deactivated throughusb_gadget_deactivate()
2. Gadget has to be started throughusb_gadget_udc_start().soft_connect_store()can start/stop gadget.
3.usb_gadgethas been connected throughusb_gadget_connect(). This is assuming we are getting rid ofusb_udc_vbus_handler.
4.allow_connectis trueI have so far identified two constraints here:
a.gadget->ops->pullup()can sleep in some implementations. For instance:BUG: scheduling while atomic: init/1/0x00000002 .. [ 26.990631][ T1] Call trace: [ 26.993759][ T1] dump_backtrace+0x104/0x128 [ 26.998281][ T1] show_stack+0x20/0x30 [ 27.002279][ T1] dump_stack_lvl+0x6c/0x9c [ 27.006627][ T1] __schedule_bug+0x84/0xb4 [ 27.010973][ T1] __schedule+0x6f0/0xaec [ 27.015147][ T1] schedule+0xc8/0x134 [ 27.019059][ T1] schedule_timeout+0x98/0x134 [ 27.023666][ T1] msleep+0x34/0x4c [ 27.027317][ T1] dwc3_core_soft_reset+0xf0/0x354Quoted 8 lines
[ 27.032273][ T1] dwc3_gadget_pullup+0xec/0x1d8 [ 27.037055][ T1] usb_gadget_pullup_update_locked+0xa0/0x1e0 [ 27.042967][ T1] udc_bind_to_driver+0x1e4/0x30c [ 27.047835][ T1] usb_gadget_probe_driver+0xd0/0x178 [ 27.053051][ T1] gadget_dev_desc_UDC_store+0xf0/0x13c [ 27.058442][ T1] configfs_write_iter+0x100/0x178 [ 27.063399][ T1] vfs_write+0x278/0x3c4 [ 27.067483][ T1] ksys_write+0x80/0xf4
Quoted 2 lines
What kernel was this trace made with? I don't see
udc_bind_to_driverappearing anywhere in 6.4-rc3.
Sorry, I was switching between devices running different kernel versions, with the latest one running 6.1, and posted trace from an older one by mistake.
Quoted 79 lines
Quoted 38 lines
b.
gadget->ops->udc_startcan also sleep in some implementations. For example:[ 28.024255][ T1] BUG: scheduling while atomic: init/1/0x00000002 .... [ 28.324996][ T1] Call trace: [ 28.328126][ T1] dump_backtrace+0x104/0x128 [ 28.332647][ T1] show_stack+0x20/0x30 [ 28.336645][ T1] dump_stack_lvl+0x6c/0x9c [ 28.340993][ T1] __schedule_bug+0x84/0xb4 [ 28.345340][ T1] __schedule+0x6f0/0xaec [ 28.349513][ T1] schedule+0xc8/0x134 [ 28.353425][ T1] schedule_timeout+0x4c/0x134 [ 28.358033][ T1] wait_for_common+0xac/0x13c [ 28.362554][ T1] wait_for_completion_killable+0x20/0x3c [ 28.368118][ T1] __kthread_create_on_node+0xe4/0x1ec [ 28.373422][ T1] kthread_create_on_node+0x54/0x80 [ 28.378464][ T1] setup_irq_thread+0x50/0x108 [ 28.383072][ T1] __setup_irq+0x90/0x87c [ 28.387245][ T1] request_threaded_irq+0x144/0x180 [ 28.392287][ T1] dwc3_gadget_start+0x50/0xac [ 28.396866][ T1] udc_bind_to_driver+0x14c/0x31c [ 28.401763][ T1] usb_gadget_probe_driver+0xd0/0x178 [ 28.406980][ T1] gadget_dev_desc_UDC_store+0xf0/0x13c [ 28.412370][ T1] configfs_write_iter+0x100/0x178 [ 28.417325][ T1] vfs_write+0x278/0x3c4 [ 28.421411][ T1] ksys_write+0x80/0xf4static int dwc3_gadget_start(struct
usb_gadget*g,
structusb_gadget_driver*driver){ struct dwc3 *dwc = gadget_to_dwc(g); ... irq = dwc->irq_gadget; ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt, IRQF_SHARED, "dwc3", dwc->ev_buf);Quoted 5 lines
Given that "
1016fc0c096cUSB: gadget: Fix obscure lockdep violation forudc_mutex" has been there for a while and no one has reported issues so far, perhaps ->disconnect() callback is no longer being invoked in atomic context and the documentation is what that needs to be updated ?That's part of what I'm trying to figure out. However, some UDC drivers call ->disconnect() directly when they detect loss of VBUS power, instead of going through the core. So disconnect handlers will have remain capable of running in interrupt context until those UDC drivers are changed.
Getting back to your first point, it looks like we need to assume any routine that needs to communicate with the UDC hardware (such as the ->pullup callback used in usb_gadget_{dis}connect()) must always be called in process context. This means that
usb_udc_connect_control()always has to run in process context, since it will do either a connect or a disconnect.On the other hand, some routines -- in particular,
usb_udc_vbus_handler()-- may be called by a UDC driver's interrupt handler and therefore may run in interrupt context. (This fact should be noted in that routine's kerneldoc, by the way.)So here's the problem:
usb_udc_vbus_handler()running in interrupt context callsusb_udc_connect_control(), which has to run in process context. And this is not just a simple issue caused by the ->disconnect() callback or use of mutexes; it's more fundamental.I'm led to conclude that you were right to offload part of usb_udc_vbus_handler()'s job to a workqueue. It's an awkward thing to do, because you have to make sure to cancel the work item at times when it's no longer needed. But there doesn't seem to be any other choice.
Here's two related problems for you to think about:
1. Once
gadget_unbind_driver()has calledusb_gadget_disconnect(), we don't want a VBUS change to cause usb_udc_vbus_handler()'s work routine to turn the pullup back on. How can we prevent this?
Quoted 4 lines
2. More generally, suppose
usb_udc_vbus_handler()gets called at exactly the same time that some other pathway (eithergadget_bind_driver()orsoft_connect_store()) tries to do a connect or disconnect. What should happen then?
I believe I can solve the above races by protecting the flags set by each of them with connect_lock and not pulling up unless all of them are true.
The caller will hold connect_lock, update the respective flag and invoke the below usb_gadget_pullup_update_locked function(shown below).
Code stub:
/* Internal version of usb_gadget_connect needs to be called with connect_lock held. */
static int usb_gadget_pullup_update_locked(struct usb_gadget *gadget)
__must_hold(&gadget->udc->connect_lock)
{
int ret = 0;
bool connect = !gadget->deactivated && gadget->udc->started &&
gadget->udc->vbus &&
gadget->udc->allow_connect;
if (!gadget->ops->pullup) {
ret = -EOPNOTSUPP;
goto out;
}
if (connect != gadget->connected) {
ret = gadget->ops->pullup(gadget, connect);
if (!ret)
gadget->connected = connect;
if (!connect) {
mutex_lock(&udc_lock);
if (gadget->udc->driver)
gadget->udc->driver->disconnect(gadget);
mutex_unlock(&udc_lock);
}out:
trace_usb_gadget_connect(gadget, ret);
return ret;
}However, while auditing the code again, I noticed another potential race as well:
Looks like usb_del_gadget() can potentially race against usb_udc_vbus_handler() and call device_unregister.
This implies usb_udc can be freed while usb_udc_vbus_handler() or the work item is executing.
void usb_del_gadget(struct usb_gadget *gadget)
{
struct usb_udc *udc = gadget->udc;..
...
device_unregister(&udc->dev); }
EXPORT_SYMBOL_GPL(usb_del_gadget);
Does this look like a valid concern to you or am I misunderstanding this ? If so, I am afraid that the only way to solve this is by synchronizing usb_udc_vbus_handler() against usb_del_gadget() through a mutex as device_unregister() can sleep.
So offloading usb_udc_vbus_handler() cannot work either.
usb_udc_vbus_hander() seems to be invoked from the following drivers:
1. drivers/usb/chipidea/udc.c:usb_udc_vbus_hander() is called from a non-atomic context.
2. drivers/usb/gadget/udc/max3420_udc.c usb_udc_vbus_hander() is called from the interrupt handler. However, all the events are processed from max3420_thread kthread. So I am thinking of making them threaded irq handlers instead.
3. drivers/usb/gadget/udc/renesas_usbf.c
This one looks more invasive. However, still attempting to move them to threaded irq handlers.
As always, I'm looking forward to your feedback !
Thanks,
Badhri
Quoted 2 lines
Alan Stern
Quoted 38 lines · Badhri Jagan Sridharan
Thanks again Alan !
Quoted 29 lines · Alan Stern
Getting back to your first point, it looks like we need to assume any routine that needs to communicate with the UDC hardware (such as the ->pullup callback used in usb_gadget_{dis}connect()) must always be called in process context. This means that
usb_udc_connect_control()always has to run in process context, since it will do either a connect or a disconnect.On the other hand, some routines -- in particular,
usb_udc_vbus_handler()-- may be called by a UDC driver's interrupt handler and therefore may run in interrupt context. (This fact should be noted in that routine's kerneldoc, by the way.)So here's the problem:
usb_udc_vbus_handler()running in interrupt context callsusb_udc_connect_control(), which has to run in process context. And this is not just a simple issue caused by the ->disconnect() callback or use of mutexes; it's more fundamental.I'm led to conclude that you were right to offload part of usb_udc_vbus_handler()'s job to a workqueue. It's an awkward thing to do, because you have to make sure to cancel the work item at times when it's no longer needed. But there doesn't seem to be any other choice.
Here's two related problems for you to think about:
1. Once
gadget_unbind_driver()has calledusb_gadget_disconnect(), we don't want a VBUS change to cause usb_udc_vbus_handler()'s work routine to turn the pullup back on. How can we prevent this?Quoted 4 lines
2. More generally, suppose
usb_udc_vbus_handler()gets called at exactly the same time that some other pathway (eithergadget_bind_driver()orsoft_connect_store()) tries to do a connect or disconnect. What should happen then?
Quoted 7 lines
I believe I can solve the above races by protecting the flags set by each of them with
connect_lockand not pulling up unless all of them are true.The caller will hold
connect_lock, update the respective flag and invoke the belowusb_gadget_pullup_update_lockedfunction(shown below).
Are you certain this can be done without causing any deadlocks?
Quoted 10 lines
Code stub:
/* Internal version ofusb_gadget_connectneeds to be called withconnect_lockheld. */
static intusb_gadget_pullup_update_locked(struct usb_gadget *gadget)__must_hold(&gadget->udc->connect_lock) { int ret = 0; bool connect = !gadget->deactivated && gadget->udc->started && gadget->udc->vbus && gadget->udc->allow_connect;
On further thought, I decided "allow_connect" is a dumb name. Let's call it "unbinding" instead, since it gets set only when a gadget driver is about to be unbound (which is when we want to prevent new connections).
Quoted 6 lines
if (!gadget->ops->pullup) {
ret = -EOPNOTSUPP;
goto out;
}
if (connect != gadget->connected) {You need to be more careful here. It's possible to have gadget->connected set at the same time as gadget->deactivated -- it means that when the gadget gets re-activated, it will immediately try to connect again.
In fact, this logic doesn't look right at all. For example, suppose the gadget driver wants to disconnect. This routine will compute connect = true and will see that gadget->connected is set, so it won't do anything!
I think it would be better just to merge the new material into usb_gadget_connect() and usb_gadget_disconnect().
Quoted 27 lines
ret = gadget->ops->pullup(gadget, connect); if (!ret) gadget->connected = connect; if (!connect) { mutex_lock(&udc_lock); if (gadget->udc->driver) gadget->udc->driver->disconnect(gadget); mutex_unlock(&udc_lock); }out:
trace_usb_gadget_connect(gadget, ret); return ret; }However, while auditing the code again, I noticed another potential race as well:
Looks likeusb_del_gadget()can potentially race againstusb_udc_vbus_handler()and calldevice_unregister.
This impliesusb_udccan be freed whileusb_udc_vbus_handler()or the work item is executing.void
usb_del_gadget(struct usb_gadget *gadget){ struct usb_udc *udc = gadget->udc;
Quoted 7 lines
..
...device_unregister(&udc->dev); }
EXPORT_SYMBOL_GPL(usb_del_gadget);Does this look like a valid concern to you or am I misunderstanding this ?
You're missing an important point. Before doing device_unregister(), this routine calls device_del(&gadget->dev). That will unbind the gadget driver, which (among other things) will stop the UDC, preventing it from calling usb_udc_vbus_handler(). However, you're right that the work item will need to be cancelled at some point before the usb_udc is unregistered.
Quoted 15 lines
If so, I am afraid that the only way to solve this is by synchronizing
usb_udc_vbus_handler()againstusb_del_gadget()through a mutex asdevice_unregister()can sleep.
So offloadingusb_udc_vbus_handler()cannot work either.
usb_udc_vbus_hander()seems to be invoked from the following drivers:1.
drivers/usb/chipidea/udc.c:usb_udc_vbus_hander()is called from a non-atomic context.2.
drivers/usb/gadget/udc/max3420_udc.cusb_udc_vbus_hander()is called from the interrupt handler. However, all the events are processed frommax3420_threadkthread. So I am thinking of making them threaded irq handlers instead.
Quoted 5 lines
3.
drivers/usb/gadget/udc/renesas_usbf.c
This one looks more invasive. However, still attempting to move them to threaded irq handlers.As always, I'm looking forward to your feedback !
Moving those things to threaded IRQ handlers is a separate job. Let's get this issue fixed first.
Alan Stern
Quoted 61 lines · Alan Stern
Quoted 38 lines · Badhri Jagan Sridharan
Thanks again Alan !
Quoted 29 lines · Alan Stern
Getting back to your first point, it looks like we need to assume any routine that needs to communicate with the UDC hardware (such as the ->pullup callback used in usb_gadget_{dis}connect()) must always be called in process context. This means that
usb_udc_connect_control()always has to run in process context, since it will do either a connect or a disconnect.On the other hand, some routines -- in particular,
usb_udc_vbus_handler()-- may be called by a UDC driver's interrupt handler and therefore may run in interrupt context. (This fact should be noted in that routine's kerneldoc, by the way.)So here's the problem:
usb_udc_vbus_handler()running in interrupt context callsusb_udc_connect_control(), which has to run in process context. And this is not just a simple issue caused by the ->disconnect() callback or use of mutexes; it's more fundamental.I'm led to conclude that you were right to offload part of usb_udc_vbus_handler()'s job to a workqueue. It's an awkward thing to do, because you have to make sure to cancel the work item at times when it's no longer needed. But there doesn't seem to be any other choice.
Here's two related problems for you to think about:
1. Once
gadget_unbind_driver()has calledusb_gadget_disconnect(), we don't want a VBUS change to cause usb_udc_vbus_handler()'s work routine to turn the pullup back on. How can we prevent this?Quoted 4 lines
2. More generally, suppose
usb_udc_vbus_handler()gets called at exactly the same time that some other pathway (eithergadget_bind_driver()orsoft_connect_store()) tries to do a connect or disconnect. What should happen then?Quoted 7 lines
I believe I can solve the above races by protecting the flags set by each of them with
connect_lockand not pulling up unless all of them are true.The caller will hold
connect_lock, update the respective flag and invoke the belowusb_gadget_pullup_update_lockedfunction(shown below).Are you certain this can be done without causing any deadlocks?
Quoted 10 lines
Code stub:
/* Internal version ofusb_gadget_connectneeds to be called withconnect_lockheld. */
static intusb_gadget_pullup_update_locked(struct usb_gadget *gadget)__must_hold(&gadget->udc->connect_lock) { int ret = 0; bool connect = !gadget->deactivated && gadget->udc->started && gadget->udc->vbus && gadget->udc->allow_connect;
Quoted 4 lines
On further thought, I decided "
allow_connect" is a dumb name. Let's call it "unbinding" instead, since it gets set only when a gadget driver is about to be unbound (which is when we want to prevent new connections).
Sure, fixing it in v3.
Quoted 13 lines
Quoted 7 lines
if (!gadget->ops->pullup) { ret = -EOPNOTSUPP; goto out; } if (connect != gadget->connected) {You need to be more careful here. It's possible to have
gadget->connectedset at the same time asgadget->deactivated-- it means that when the gadget gets re-activated, it will immediately try to connect again.
Quoted 7 lines
In fact, this logic doesn't look right at all. For example, suppose the gadget driver wants to disconnect. This routine will compute connect = true and will see that
gadget->connectedis set, so it won't do anything!I think it would be better just to merge the new material into
usb_gadget_connect()andusb_gadget_disconnect().
I ended up merging them into usb_gadget_pullup_update_locked() so that each of the individual helper function can call usb_gadget_pullup_update_locked() while holding the connect_lock. I actually had usb_gadget_(dis)connect() set udc->vbus. It appears to me that both usb_gadget_(dis)connect() and usb_udc_vbus_handler() are meant to be called based on vbus presence and hence seem to be redundant. Wondering if we could get rid of usb_gadget_(dis)connect() given that drivers/power/supply/isp1704_charger.c is only call it and instead make it call usb_udc_vbus_handler() instead ?
Quoted 34 lines
Quoted 34 lines
ret = gadget->ops->pullup(gadget, connect); if (!ret) gadget->connected = connect; if (!connect) { mutex_lock(&udc_lock); if (gadget->udc->driver) gadget->udc->driver->disconnect(gadget); mutex_unlock(&udc_lock); }out:
trace_usb_gadget_connect(gadget, ret); return ret; }However, while auditing the code again, I noticed another potential race as well:
Looks likeusb_del_gadget()can potentially race againstusb_udc_vbus_handler()and calldevice_unregister.
This impliesusb_udccan be freed whileusb_udc_vbus_handler()or the work item is executing.void
usb_del_gadget(struct usb_gadget *gadget){ struct usb_udc *udc = gadget->udc;..
...device_unregister(&udc->dev); }
EXPORT_SYMBOL_GPL(usb_del_gadget);
Quoted 9 lines
Quoted 1 line
Does this look like a valid concern to you or am I misunderstanding this ?
You're missing an important point. Before doing
device_unregister(), this routine callsdevice_del(&gadget->dev). That will unbind the gadget driver, which (among other things) will stop the UDC, preventing it from callingusb_udc_vbus_handler(). However, you're right that the work item will need to be cancelled at some point before theusb_udcis unregistered.
Sure, thought gadget_unbind_driver() might be a good place to cancel the work item. So, cancelling it there in V3.
Quoted 15 lines
Quoted 15 lines
If so, I am afraid that the only way to solve this is by synchronizing
usb_udc_vbus_handler()againstusb_del_gadget()through a mutex asdevice_unregister()can sleep.
So offloadingusb_udc_vbus_handler()cannot work either.
usb_udc_vbus_hander()seems to be invoked from the following drivers:1.
drivers/usb/chipidea/udc.c:usb_udc_vbus_hander()is called from a non-atomic context.2.
drivers/usb/gadget/udc/max3420_udc.cusb_udc_vbus_hander()is called from the interrupt handler. However, all the events are processed frommax3420_threadkthread. So I am thinking of making them threaded irq handlers instead.
Quoted 8 lines
Quoted 5 lines
3.
drivers/usb/gadget/udc/renesas_usbf.c
This one looks more invasive. However, still attempting to move them to threaded irq handlers.As always, I'm looking forward to your feedback !
Moving those things to threaded IRQ handlers is a separate job. Let's get this issue fixed first.
Sounds good !
Thanks,
Badhri
Quoted 2 lines
Alan Stern
Quoted 9 lines · Badhri Jagan Sridharan
Quoted 3 lines · Alan Stern
I think it would be better just to merge the new material into
usb_gadget_connect()andusb_gadget_disconnect().I ended up merging them into
usb_gadget_pullup_update_locked()so that each of the individual helper function can callusb_gadget_pullup_update_locked()while holding theconnect_lock. I actually had usb_gadget_(dis)connect() setudc->vbus.
What? No, that's not right. They are two completely separate concepts. The host controls VBUS and the gadget controls the pullup.
Quoted 4 lines
It appears to me
that both usb_gadget_(dis)connect() andusb_udc_vbus_handler()are meant to be called based on vbus presence and hence seem to be redundant.
They are not. We need to support turning off the pullup while VBUS is on.
Quoted 3 lines
Wondering if we could get rid of usb_gadget_(dis)connect()
given thatdrivers/power/supply/isp1704_charger.cis only call it and instead make it callusb_udc_vbus_handler()instead ?
In short, no.
Alan Stern