kernel/sysctl.c: remove to major base directories
Subsystems (5)
cover kernel/sysctl.c: remove to major base directories
Arnd, x86 folks, your review for the second patch would be greatly appreciated.
Now that Joel has cleaned up and removed one of the routines which we wanted to deprecate, remove two major arrays from kernel/sysctl.c which are empty or almost empty. One of them, the debug one just needs moving to its source, so do that.
The move for the signal sysctl costs us 23 bytes but we have already saved 1465 bytes with the other recent cleanup Joel made. The next step is to depreecate one more call and then we can simplify the registration to only use ARRAY_SIZE() completely and remove the extra empty entries all over. That should save us tons of bytes all around in the kernel and we'd then later kill for good all recursion possible sysctl registration calls.
These patches apply on top of sysctl-next [0] which already carry Joel's patches.
[0] https://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux.git/log/?h=sysctl-next
Luis Chamberlain (2):
sysctl: remove empty dev table
signal: move show_unhandled_signals sysctl to its own file
arch/parisc/kernel/traps.c | 1 + arch/x86/kernel/signal.c | 1 + arch/x86/kernel/traps.c | 1 + arch/x86/kernel/umip.c | 1 + arch/x86/mm/fault.c | 1 + kernel/signal.c | 23 +++++++++++++++++++++++ kernel/sysctl.c | 19 ------------------- 7 files changed, 28 insertions(+), 19 deletions(-)
Signature · 1 line
2.39.2
PATCH 1/2 sysctl: remove empty dev table
Now that all the dev sysctls have been moved out we can remove the dev sysctl base directory. We don't need to create base directories, they are created for you as if using 'mkdir -p' with register_syctl() and register_sysctl_init(). For details refer to sysctl_mkdir_p() usage.
We save 90 bytes with this changes:
./scripts/bloat-o-meter vmlinux.2.remove-sysctl-table vmlinux.3-remove-dev-table add/remove: 0/1 grow/shrink: 0/1 up/down: 0/-90 (-90)
Function old new deltasysctl_init_bases 111 85 -26dev_table 64 - -64
Total: Before=21257057, After=21256967, chg -0.00%
--- kernel/sysctl.c | 5 ----- 1 file changed, 5 deletions(-)
kernel/sysctl.c +0 -5
@@ -2344,16 +2344,11 @@ static struct ctl_table debug_table[] = { { } }; -static struct ctl_table dev_table[] = { - { } -}; -int __init sysctl_init_bases (void ) {register_sysctl_init ("kernel" , kern_table);register_sysctl_init ("vm" , vm_table);register_sysctl_init ("debug" , debug_table); -register_sysctl_init ("dev" , dev_table);return 0 ; }
Signature · 1 line
2.39.2
PATCH 2/2 signal: move show_unhandled_signals sysctl to its own file
In reply to Luis ChamberlainThe show_unhandled_signals sysctl is the only sysctl for debug left on kernel/sysctl.c. We've been moving the syctls out from kernel/sysctl.c so to help avoid merge conflicts as the shared array gets out of hand.
This change incurs simplifies sysctl registration by localizing it where it should go for a penalty in size of increasing the kernel by 23 bytes, we accept this given recent cleanups have actually already saved us 1465 bytes in the prior commits.
./scripts/bloat-o-meter vmlinux.3-remove-dev-table vmlinux.4-remove-debug-table add/remove: 3/1 grow/shrink: 0/1 up/down: 177/-154 (23)
Function old new delta
signal_debug_table - 128 +128 init_signal_sysctls - 33 +33 __pfx_init_signal_sysctls - 16 +16
sysctl_init_bases 85 59 -26debug_table 128 - -128
Total: Before=21256967, After=21256990, chg +0.00%
--- arch/parisc/kernel/traps.c | 1 + arch/x86/kernel/signal.c | 1 + arch/x86/kernel/traps.c | 1 + arch/x86/kernel/umip.c | 1 + arch/x86/mm/fault.c | 1 + kernel/signal.c | 23 +++++++++++++++++++++++ kernel/sysctl.c | 14 -------------- 7 files changed, 28 insertions(+), 14 deletions(-)
arch/parisc/kernel/traps.c +1 -0
@@ -23,6 +23,7 @@#include <linux/module.h> #include <linux/smp.h> #include <linux/spinlock.h> +#include <linux/signal.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/console.h>
arch/x86/kernel/signal.c +1 -0
@@ -12,6 +12,7 @@#include <linux/sched.h> #include <linux/sched/task_stack.h> +#include <linux/signal.h> #include <linux/mm.h> #include <linux/smp.h> #include <linux/kernel.h>
arch/x86/kernel/traps.c +1 -0
@@ -31,6 +31,7 @@#include <linux/kexec.h> #include <linux/sched.h> #include <linux/sched/task_stack.h> +#include <linux/signal.h> #include <linux/timer.h> #include <linux/init.h> #include <linux/bug.h>
arch/x86/kernel/umip.c +1 -0
@@ -12,6 +12,7 @@#include <asm/insn.h> #include <asm/insn-eval.h> #include <linux/ratelimit.h> +#include <linux/signal.h> #undef pr_fmt#define pr_fmt (fmt) "umip: " fmt
arch/x86/mm/fault.c +1 -0
@@ -6,6 +6,7 @@*/ #include <linux/sched.h> /* test_thread_flag(), ... */ #include <linux/sched/task_stack.h> /* task_stack_*(), ... */ +#include <linux/sched/signal.h> /* show_unhandled_signals */ #include <linux/kdebug.h> /* oops_begin/end, ... */ #include <linux/extable.h> /* search_exception_tables */ #include <linux/memblock.h> /* max_low_pfn */
kernel/signal.c +23 -0
@@ -45,6 +45,7 @@#include <linux/posix-timers.h> #include <linux/cgroup.h> #include <linux/audit.h> +#include <linux/sysctl.h> #define CREATE_TRACE_POINTS #include <trace/events/signal.h>
@@ -4771,6 +4772,28 @@ static inline void siginfo_buildtime_checks(void)#endif } +#if defined(CONFIG_SYSCTL ) +static struct ctl_table signal_debug_table[] = { +#ifdef CONFIG_SYSCTL_EXCEPTION_TRACE + { + .procname = "exception-trace", + .data = &show_unhandled_signals, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec + }, +#endif + { } +}; + +static int __init init_signal_sysctls (void ) +{ +register_sysctl_init ("debug" , signal_debug_table); +return 0 ; +} +early_initcall (init_signal_sysctls); +#endif /* CONFIG_SYSCTL */ +void __init signals_init (void ) {siginfo_buildtime_checks ();
kernel/sysctl.c +0 -14
@@ -2331,24 +2331,10 @@ static struct ctl_table vm_table[] = { { } }; -static struct ctl_table debug_table[] = { -#ifdef CONFIG_SYSCTL_EXCEPTION_TRACE - { - .procname = "exception-trace", - .data = &show_unhandled_signals, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec - }, -#endif - { } -}; -int __init sysctl_init_bases (void ) {register_sysctl_init ("kernel" , kern_table);register_sysctl_init ("vm" , vm_table); -register_sysctl_init ("debug" , debug_table);return 0 ; }
Signature · 1 line
2.39.2
Re: [PATCH 2/2] signal: move show_unhandled_signals sysctl to its own file
arch/x86/kernel/umip.c line 15
Quoted 7 lines · Luis Chamberlain
arch/x86/kernel/umip.c +1
-0@@ -12,6 +12,7 @@#include <asm/insn.h> #include <asm/insn-eval.h> #include <linux/ratelimit.h> +#include <linux/signal.h>
Oh, so this is actually fixing a bug: umip.c uses 'show_unhandled_signals' but it doesn't explicitly include linux/signal.h where 'show_unhandled_signals' is declared.
It doesn't actually have anything to do with moving the show_unhandled_signals sysctl, right?
If that's the case, it would be nice to have this in its own patch.
Re: [PATCH 2/2] signal: move show_unhandled_signals sysctl to its own file
Quoted 12 lines · Dave Hansen
arch/x86/kernel/umip.c line 15
Quoted 7 lines · Luis Chamberlain
arch/x86/kernel/umip.c +1
-0@@ -12,6 +12,7 @@#include <asm/insn.h> #include <asm/insn-eval.h> #include <linux/ratelimit.h> +#include <linux/signal.h> Oh, so this is actually fixing a bug:
umip.cuses 'show_unhandled_signals' but it doesn't explicitly includelinux/signal.hwhere 'show_unhandled_signals' is declared.
Fixes a non-critical bug perhaps, but I doubt it would be fixing a functional bug as otherwise folks would have reported a build bug, no?
What or how it ends up including that file today to avoid build failures is beyond me.
Quoted 2 lines
It doesn't actually have anything to do with moving the
show_unhandled_signalssysctl, right?
Well in my case it is making sure the sysctl variable used is declared as well.
Quoted 1 line
If that's the case, it would be nice to have this in its own patch.
If its not really fixing any build bugs or functional bugs I don't see the need. But if you really want it, I can do it.
Let me know!
Luis
Re: [PATCH 2/2] signal: move show_unhandled_signals sysctl to its own file
Quoted 4 lines · Luis Chamberlain
Quoted 2 lines
It doesn't actually have anything to do with moving the
show_unhandled_signalssysctl, right?Well in my case it is making sure the sysctl variable used is declared as well.
But what does this have to do with _this_ patch? This:
arch/x86/kernel/umip.c line 15
Quoted 7 lines
arch/x86/kernel/umip.c +1
-0@@ -12,6 +12,7 @@#include <asm/insn.h> #include <asm/insn-eval.h> #include <linux/ratelimit.h> +#include <linux/signal.h>
For instance. You don't move things to another header or make *ANY* change to the compilation of umip.c. So why patch it?
It looks to me like a _fundamentally_ superfluous change. That hunk literally *can't* be related to the rest of the patch.
Quoted 5 lines
Quoted 1 line
If that's the case, it would be nice to have this in its own patch.
If its not really fixing any build bugs or functional bugs I don't see the need. But if you really want it, I can do it.
Let me know!
Yes, I really want it.
Please remove all the x86 bits from _this_ patch. If x86 has a separate, preexisting problem, please send that patch separately with a separate changelog and justification.
We'll take a look.
Re: [PATCH 2/2] signal: move show_unhandled_signals sysctl to its own file
Quoted 7 lines · Dave Hansen
Quoted 4 lines · Luis Chamberlain
Quoted 2 lines
It doesn't actually have anything to do with moving the
show_unhandled_signalssysctl, right?Well in my case it is making sure the sysctl variable used is declared as well.
But what does this have to do with _this_ patch? This:
Because to create consistency for the users.
Quoted 11 lines
arch/x86/kernel/umip.c line 15
Quoted 7 lines
arch/x86/kernel/umip.c +1
-0@@ -12,6 +12,7 @@#include <asm/insn.h> #include <asm/insn-eval.h> #include <linux/ratelimit.h> +#include <linux/signal.h> For instance. You don't move things to another header or make *ANY* change to the compilation of
umip.c. So why patch it?
Quoted 2 lines
It looks to me like a _fundamentally_ superfluous change. That hunk literally *can't* be related to the rest of the patch.
I suspect it is not needed as otherwise compilation would have failed. So I'll just drop it.
Quoted 6 lines
Quoted 5 lines
Quoted 1 line
If that's the case, it would be nice to have this in its own patch.
If its not really fixing any build bugs or functional bugs I don't see the need. But if you really want it, I can do it.
Let me know!
Quoted 7 lines
Yes, I really want it.
Please remove all the x86 bits from _this_ patch. If x86 has a separate, preexisting problem, please send that patch separately with a separate changelog and justification.
We'll take a look.
Sounds good.
Luis
Re: [PATCH 2/2] signal: move show_unhandled_signals sysctl to its own file
In reply to Luis ChamberlainQuoted 1 line · Luis Chamberlain
Let me know!
Re-poke. I know, it's just been a day :P
Luis