clk: qcom: gcc-ipq6018: update UBI32 PLL
Subsystems (3)
PATCH 1/2 clk: qcom: gcc-ipq6018: update UBI32 PLL
Update the UBI32 alpha PLL config to the latest values from the downstream QCA 5.4 kernel.
--- drivers/clk/qcom/gcc-ipq6018.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/clk/qcom/gcc-ipq6018.c +6 -1
@@ -4149,15 +4149,20 @@ static struct clk_branch gcc_dcc_clk = {static const struct alpha_pll_config ubi32_pll_config = { .l =0x3e , - .alpha =0x57 , + .alpha =0x6667 , .config_ctl_val =0x240d6aa8 , .config_ctl_hi_val =0x3c2 , + .config_ctl_val =0x240d4828 , + .config_ctl_hi_val =0x6 , .main_output_mask =BIT (0 ), .aux_output_mask =BIT (1 ), .pre_div_val =0x0 , .pre_div_mask =BIT (12 ), .post_div_val =0x0 , .post_div_mask =GENMASK (9 ,8 ), + .alpha_en_mask =BIT (24 ), + .test_ctl_val =0x1C0000C0 , + .test_ctl_hi_val =0x4000 , };static const struct alpha_pll_config nss_crypto_pll_config = {
Signature · 1 line
2.40.1
PATCH 2/2 clk: qcom: ipq6018: fix networking resets
Networking resets in IPQ6018 all use bitmask as they require multiple bits to be set and cleared instead of a single bit.
So, current networking resets have the same register and bit 0 set which is clearly incorrect.
--- drivers/clk/qcom/gcc-ipq6018.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)
drivers/clk/qcom/gcc-ipq6018.c +16 -16
@@ -4520,24 +4520,24 @@ static const struct qcom_reset_map gcc_ipq6018_resets[] = { [GCC_PCIE0_AHB_ARES] = { 0x75040, 5 }, [GCC_PCIE0_AXI_MASTER_STICKY_ARES] = { 0x75040, 6 }, [GCC_PCIE0_AXI_SLAVE_STICKY_ARES] = { 0x75040, 7 }, - [GCC_PPE_FULL_RESET] = { 0x68014, 0 }, - [GCC_UNIPHY0_SOFT_RESET] = { 0x56004, 0 }, + [GCC_PPE_FULL_RESET] = { .reg = 0x68014, .bitmask = 0xf0000 }, + [GCC_UNIPHY0_SOFT_RESET] = { .reg = 0x56004, .bitmask = 0x3ff2 }, [GCC_UNIPHY0_XPCS_RESET] = { 0x56004, 2 }, - [GCC_UNIPHY1_SOFT_RESET] = { 0x56104, 0 }, + [GCC_UNIPHY1_SOFT_RESET] = { .reg = 0x56104, .bitmask = 0x32 }, [GCC_UNIPHY1_XPCS_RESET] = { 0x56104, 2 }, - [GCC_EDMA_HW_RESET] = { 0x68014, 0 }, - [GCC_NSSPORT1_RESET] = { 0x68014, 0 }, - [GCC_NSSPORT2_RESET] = { 0x68014, 0 }, - [GCC_NSSPORT3_RESET] = { 0x68014, 0 }, - [GCC_NSSPORT4_RESET] = { 0x68014, 0 }, - [GCC_NSSPORT5_RESET] = { 0x68014, 0 }, - [GCC_UNIPHY0_PORT1_ARES] = { 0x56004, 0 }, - [GCC_UNIPHY0_PORT2_ARES] = { 0x56004, 0 }, - [GCC_UNIPHY0_PORT3_ARES] = { 0x56004, 0 }, - [GCC_UNIPHY0_PORT4_ARES] = { 0x56004, 0 }, - [GCC_UNIPHY0_PORT5_ARES] = { 0x56004, 0 }, - [GCC_UNIPHY0_PORT_4_5_RESET] = { 0x56004, 0 }, - [GCC_UNIPHY0_PORT_4_RESET] = { 0x56004, 0 }, + [GCC_EDMA_HW_RESET] = { .reg = 0x68014, .bitmask = 0x300000 }, + [GCC_NSSPORT1_RESET] = { .reg = 0x68014, .bitmask = 0x1000003 }, + [GCC_NSSPORT2_RESET] = { .reg = 0x68014, .bitmask = 0x200000c }, + [GCC_NSSPORT3_RESET] = { .reg = 0x68014, .bitmask = 0x4000030 }, + [GCC_NSSPORT4_RESET] = { .reg = 0x68014, .bitmask = 0x8000300 }, + [GCC_NSSPORT5_RESET] = { .reg = 0x68014, .bitmask = 0x10000c00 }, + [GCC_UNIPHY0_PORT1_ARES] = { .reg = 0x56004, .bitmask = 0x30 }, + [GCC_UNIPHY0_PORT2_ARES] = { .reg = 0x56004, .bitmask = 0xc0 }, + [GCC_UNIPHY0_PORT3_ARES] = { .reg = 0x56004, .bitmask = 0x300 }, + [GCC_UNIPHY0_PORT4_ARES] = { .reg = 0x56004, .bitmask = 0xc00 }, + [GCC_UNIPHY0_PORT5_ARES] = { .reg = 0x56004, .bitmask = 0x3000 }, + [GCC_UNIPHY0_PORT_4_5_RESET] = { .reg = 0x56004, .bitmask = 0x3c02 }, + [GCC_UNIPHY0_PORT_4_RESET] = { .reg = 0x56004, .bitmask = 0xc02 }, [GCC_LPASS_BCR] = {0x1F000, 0}, [GCC_UBI32_TBU_BCR] = {0x65000, 0}, [GCC_LPASS_TBU_BCR] = {0x6C000, 0},
Signature · 1 line
2.40.1
Re: [PATCH 2/2] clk: qcom: ipq6018: fix networking resets
Quoted 17 lines · Robert Marko
Networking resets in IPQ6018 all use bitmask as they require multiple bits to be set and cleared instead of a single bit.
So, current networking resets have the same register and bit 0 set which is clearly incorrect.
Fixes d9db07f088af ("clk: qcom: Add ipq6018 Global Clock Controller support")Signed-off-by Robert Marko <[email protected]>--- drivers/clk/qcom/gcc-ipq6018.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)drivers/clk/qcom/gcc-ipq6018.c +0
-0
drivers/clk/qcom/gcc-ipq6018.c static const struct qcom_reset_map gcc_ipq6018_resets[] = { · line 4523
Quoted 6 lines
drivers/clk/qcom/gcc-ipq6018.c +1
-2@@ -4520,24 +4520,24 @@ static const struct qcom_reset_map gcc_ipq6018_resets[] = { [GCC_PCIE0_AHB_ARES] = { 0x75040, 5 }, [GCC_PCIE0_AXI_MASTER_STICKY_ARES] = { 0x75040, 6 }, [GCC_PCIE0_AXI_SLAVE_STICKY_ARES] = { 0x75040, 7 }, - [GCC_PPE_FULL_RESET] = { 0x68014, 0 }, - [GCC_UNIPHY0_SOFT_RESET] = { 0x56004, 0 }, + [GCC_PPE_FULL_RESET] = { .reg = 0x68014, .bitmask = 0xf0000 },
GENMASK / GENMASK|GENMASK / GENMASK|BIT?
Konrad
Quoted 34 lines
drivers/clk/qcom/gcc-ipq6018.c +15
-14+ [GCC_UNIPHY0_SOFT_RESET] = { .reg = 0x56004, .bitmask = 0x3ff2 }, [GCC_UNIPHY0_XPCS_RESET] = { 0x56004, 2 }, - [GCC_UNIPHY1_SOFT_RESET] = { 0x56104, 0 }, + [GCC_UNIPHY1_SOFT_RESET] = { .reg = 0x56104, .bitmask = 0x32 }, [GCC_UNIPHY1_XPCS_RESET] = { 0x56104, 2 }, - [GCC_EDMA_HW_RESET] = { 0x68014, 0 }, - [GCC_NSSPORT1_RESET] = { 0x68014, 0 }, - [GCC_NSSPORT2_RESET] = { 0x68014, 0 }, - [GCC_NSSPORT3_RESET] = { 0x68014, 0 }, - [GCC_NSSPORT4_RESET] = { 0x68014, 0 }, - [GCC_NSSPORT5_RESET] = { 0x68014, 0 }, - [GCC_UNIPHY0_PORT1_ARES] = { 0x56004, 0 }, - [GCC_UNIPHY0_PORT2_ARES] = { 0x56004, 0 }, - [GCC_UNIPHY0_PORT3_ARES] = { 0x56004, 0 }, - [GCC_UNIPHY0_PORT4_ARES] = { 0x56004, 0 }, - [GCC_UNIPHY0_PORT5_ARES] = { 0x56004, 0 }, - [GCC_UNIPHY0_PORT_4_5_RESET] = { 0x56004, 0 }, - [GCC_UNIPHY0_PORT_4_RESET] = { 0x56004, 0 }, + [GCC_EDMA_HW_RESET] = { .reg = 0x68014, .bitmask = 0x300000 }, + [GCC_NSSPORT1_RESET] = { .reg = 0x68014, .bitmask = 0x1000003 }, + [GCC_NSSPORT2_RESET] = { .reg = 0x68014, .bitmask = 0x200000c }, + [GCC_NSSPORT3_RESET] = { .reg = 0x68014, .bitmask = 0x4000030 }, + [GCC_NSSPORT4_RESET] = { .reg = 0x68014, .bitmask = 0x8000300 }, + [GCC_NSSPORT5_RESET] = { .reg = 0x68014, .bitmask = 0x10000c00 }, + [GCC_UNIPHY0_PORT1_ARES] = { .reg = 0x56004, .bitmask = 0x30 }, + [GCC_UNIPHY0_PORT2_ARES] = { .reg = 0x56004, .bitmask = 0xc0 }, + [GCC_UNIPHY0_PORT3_ARES] = { .reg = 0x56004, .bitmask = 0x300 }, + [GCC_UNIPHY0_PORT4_ARES] = { .reg = 0x56004, .bitmask = 0xc00 }, + [GCC_UNIPHY0_PORT5_ARES] = { .reg = 0x56004, .bitmask = 0x3000 }, + [GCC_UNIPHY0_PORT_4_5_RESET] = { .reg = 0x56004, .bitmask = 0x3c02 }, + [GCC_UNIPHY0_PORT_4_RESET] = { .reg = 0x56004, .bitmask = 0xc02 }, [GCC_LPASS_BCR] = {0x1F000, 0}, [GCC_UBI32_TBU_BCR] = {0x65000, 0}, [GCC_LPASS_TBU_BCR] = {0x6C000, 0},
Re: [PATCH 2/2] clk: qcom: ipq6018: fix networking resets
Quoted 16 lines · Konrad Dybcio
Quoted 12 lines · Robert Marko
Networking resets in IPQ6018 all use bitmask as they require multiple bits to be set and cleared instead of a single bit.
So, current networking resets have the same register and bit 0 set which is clearly incorrect.
Fixes d9db07f088af ("clk: qcom: Add ipq6018 Global Clock Controller support")Signed-off-by Robert Marko <[email protected]>--- drivers/clk/qcom/gcc-ipq6018.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)
Quoted 12 lines
drivers/clk/qcom/gcc-ipq6018.c static const struct qcom_reset_map gcc_ipq6018_resets[] = { · line 4523
Quoted 11 lines
drivers/clk/qcom/gcc-ipq6018.c +1
-2@@ -4520,24 +4520,24 @@ static const struct qcom_reset_map gcc_ipq6018_resets[] = { [GCC_PCIE0_AHB_ARES] = { 0x75040, 5 }, [GCC_PCIE0_AXI_MASTER_STICKY_ARES] = { 0x75040, 6 }, [GCC_PCIE0_AXI_SLAVE_STICKY_ARES] = { 0x75040, 7 }, - [GCC_PPE_FULL_RESET] = { 0x68014, 0 }, - [GCC_UNIPHY0_SOFT_RESET] = { 0x56004, 0 }, + [GCC_PPE_FULL_RESET] = { .reg = 0x68014, .bitmask = 0xf0000 },GENMASK / GENMASK|GENMASK / GENMASK|BIT?
That would explain why I did not send it before, its been on the TODO list to reverse
the QCA magic values like I did for IPQ8074.
Will do it for v2, thanks.
Regards,
Robert
Quoted 36 lines
Konrad
Quoted 34 lines
drivers/clk/qcom/gcc-ipq6018.c +15
-14+ [GCC_UNIPHY0_SOFT_RESET] = { .reg = 0x56004, .bitmask = 0x3ff2 }, [GCC_UNIPHY0_XPCS_RESET] = { 0x56004, 2 }, - [GCC_UNIPHY1_SOFT_RESET] = { 0x56104, 0 }, + [GCC_UNIPHY1_SOFT_RESET] = { .reg = 0x56104, .bitmask = 0x32 }, [GCC_UNIPHY1_XPCS_RESET] = { 0x56104, 2 }, - [GCC_EDMA_HW_RESET] = { 0x68014, 0 }, - [GCC_NSSPORT1_RESET] = { 0x68014, 0 }, - [GCC_NSSPORT2_RESET] = { 0x68014, 0 }, - [GCC_NSSPORT3_RESET] = { 0x68014, 0 }, - [GCC_NSSPORT4_RESET] = { 0x68014, 0 }, - [GCC_NSSPORT5_RESET] = { 0x68014, 0 }, - [GCC_UNIPHY0_PORT1_ARES] = { 0x56004, 0 }, - [GCC_UNIPHY0_PORT2_ARES] = { 0x56004, 0 }, - [GCC_UNIPHY0_PORT3_ARES] = { 0x56004, 0 }, - [GCC_UNIPHY0_PORT4_ARES] = { 0x56004, 0 }, - [GCC_UNIPHY0_PORT5_ARES] = { 0x56004, 0 }, - [GCC_UNIPHY0_PORT_4_5_RESET] = { 0x56004, 0 }, - [GCC_UNIPHY0_PORT_4_RESET] = { 0x56004, 0 }, + [GCC_EDMA_HW_RESET] = { .reg = 0x68014, .bitmask = 0x300000 }, + [GCC_NSSPORT1_RESET] = { .reg = 0x68014, .bitmask = 0x1000003 }, + [GCC_NSSPORT2_RESET] = { .reg = 0x68014, .bitmask = 0x200000c }, + [GCC_NSSPORT3_RESET] = { .reg = 0x68014, .bitmask = 0x4000030 }, + [GCC_NSSPORT4_RESET] = { .reg = 0x68014, .bitmask = 0x8000300 }, + [GCC_NSSPORT5_RESET] = { .reg = 0x68014, .bitmask = 0x10000c00 }, + [GCC_UNIPHY0_PORT1_ARES] = { .reg = 0x56004, .bitmask = 0x30 }, + [GCC_UNIPHY0_PORT2_ARES] = { .reg = 0x56004, .bitmask = 0xc0 }, + [GCC_UNIPHY0_PORT3_ARES] = { .reg = 0x56004, .bitmask = 0x300 }, + [GCC_UNIPHY0_PORT4_ARES] = { .reg = 0x56004, .bitmask = 0xc00 }, + [GCC_UNIPHY0_PORT5_ARES] = { .reg = 0x56004, .bitmask = 0x3000 }, + [GCC_UNIPHY0_PORT_4_5_RESET] = { .reg = 0x56004, .bitmask = 0x3c02 }, + [GCC_UNIPHY0_PORT_4_RESET] = { .reg = 0x56004, .bitmask = 0xc02 }, [GCC_LPASS_BCR] = {0x1F000, 0}, [GCC_UBI32_TBU_BCR] = {0x65000, 0}, [GCC_LPASS_TBU_BCR] = {0x6C000, 0},
Quoted 20 lines · Robert Marko
Update the UBI32 alpha PLL config to the latest values from the downstream QCA 5.4 kernel.
Signed-off-by Robert Marko <[email protected]>--- drivers/clk/qcom/gcc-ipq6018.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)drivers/clk/qcom/gcc-ipq6018.c +1
-1@@ -4149,15 +4149,20 @@ static struct clk_branch gcc_dcc_clk = {static const struct alpha_pll_config ubi32_pll_config = { .l =0x3e , - .alpha =0x57 , + .alpha =0x6667 , .config_ctl_val =0x240d6aa8 , .config_ctl_hi_val =0x3c2 ,
drivers/clk/qcom/gcc-ipq6018.c static struct clk_branch gcc_dcc_clk = { · line 4164
Quoted 10 lines
drivers/clk/qcom/gcc-ipq6018.c +4
-0+ .config_ctl_val = 0x240d4828, + .config_ctl_hi_val = 0x6, .main_output_mask = BIT(0), .aux_output_mask = BIT(1), .pre_div_val = 0x0, .pre_div_mask = BIT(12), .post_div_val = 0x0, .post_div_mask = GENMASK(9, 8), + .alpha_en_mask = BIT(24), + .test_ctl_val = 0x1C0000C0,
Please use lowercase hex.
Konrad
Quoted 4 lines
drivers/clk/qcom/gcc-ipq6018.c +1
-0+ .test_ctl_hi_val = 0x4000, };static const struct alpha_pll_config nss_crypto_pll_config = {
Re: (subset) [PATCH 1/2] clk: qcom: gcc-ipq6018: update UBI32 PLL
In reply to Robert MarkoQuoted 4 lines · Robert Marko
Update the UBI32 alpha PLL config to the latest values from the downstream QCA 5.4 kernel.
Applied, thanks!
[1/2] clk: qcom: gcc-ipq6018: update UBI32 PLL
commit: f4f0c8acee0e41c5fbae7a7ad06087668ddce0d6
[2/2] clk: qcom: ipq6018: fix networking resets
commit: 349b5bed539b491b7894a5186a895751fd8ba6c7Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>