soc: qcom: socinfo: move SMEM item struct and defines to a header

PATCH Applied Robert Marko 4 participants 9 messages May 26, 2023 – May 27, 2023

Subsystems (4)

Arm Qualcomm mailing list Arm Qualcomm support CPU frequency scaling framework Qualcomm cpufreq driver MSM8996/APQ8096

lore

Share & tools

lore

Robert Marko

author

2023-05-26 20:48 UTC #0 lore raw

PATCH v5 1/5 soc: qcom: socinfo: move SMEM item struct and defines to a header

Move SMEM item struct and related defines to a header in order to be able to reuse them in the SMEM driver instead of duplicating them.

Signed-off-by Robert Marko <[email protected]>

Reviewed-by Konrad Dybcio <[email protected]>

---
 drivers/soc/qcom/socinfo.c       | 67 +-----------------------------
 include/linux/soc/qcom/socinfo.h | 70 ++++++++++++++++++++++++++++++++
 2 files changed, 71 insertions(+), 66 deletions(-)
 create mode 100644 include/linux/soc/qcom/socinfo.h

drivers/soc/qcom/socinfo.c +1 ~~-66~~

index c2e4a57dd666..ee6bbf76d941 100644
@@ -11,6 +11,7 @@
 #include <linux/random.h>
 #include <linux/slab.h>
 #include <linux/soc/qcom/smem.h>
+#include <linux/soc/qcom/socinfo.h>
 #include <linux/string.h>
 #include <linux/stringify.h>
 #include <linux/sys_soc.h>

@@ -32,15 +33,6 @@
 #define qcom_board_id(id) QCOM_ID_ ## id, __stringify(id)
 #define qcom_board_id_named(id, name) QCOM_ID_ ## id, (name)
 
-#define SMEM_SOCINFO_BUILD_ID_LENGTH           32
-#define SMEM_SOCINFO_CHIP_ID_LENGTH            32
-
-/*
- * SMEM item id, used to acquire handles to respective
- * SMEM region.
- */
-#define SMEM_HW_SW_BUILD_ID            137
-
 #ifdef CONFIG_DEBUG_FS
 #define SMEM_IMAGE_VERSION_BLOCKS_COUNT        32
 #define SMEM_IMAGE_VERSION_SIZE                4096

@@ -126,64 +118,7 @@ static const char *const pmic_models[] = {
 	[58] = "PM8450",
 	[65] = "PM8010",
 };
-#endif /* CONFIG_DEBUG_FS */
-
-/* Socinfo SMEM item structure */
-struct socinfo {
-	__le32 fmt;
-	__le32 id;
-	__le32 ver;
-	char build_id[SMEM_SOCINFO_BUILD_ID_LENGTH];
-	/* Version 2 */
-	__le32 raw_id;
-	__le32 raw_ver;
-	/* Version 3 */
-	__le32 hw_plat;
-	/* Version 4 */
-	__le32 plat_ver;
-	/* Version 5 */
-	__le32 accessory_chip;
-	/* Version 6 */
-	__le32 hw_plat_subtype;
-	/* Version 7 */
-	__le32 pmic_model;
-	__le32 pmic_die_rev;
-	/* Version 8 */
-	__le32 pmic_model_1;
-	__le32 pmic_die_rev_1;
-	__le32 pmic_model_2;
-	__le32 pmic_die_rev_2;
-	/* Version 9 */
-	__le32 foundry_id;
-	/* Version 10 */
-	__le32 serial_num;
-	/* Version 11 */
-	__le32 num_pmics;
-	__le32 pmic_array_offset;
-	/* Version 12 */
-	__le32 chip_family;
-	__le32 raw_device_family;
-	__le32 raw_device_num;
-	/* Version 13 */
-	__le32 nproduct_id;
-	char chip_id[SMEM_SOCINFO_CHIP_ID_LENGTH];
-	/* Version 14 */
-	__le32 num_clusters;
-	__le32 ncluster_array_offset;
-	__le32 num_defective_parts;
-	__le32 ndefective_parts_array_offset;
-	/* Version 15 */
-	__le32 nmodem_supported;
-	/* Version 16 */
-	__le32  feature_code;
-	__le32  pcode;
-	__le32  npartnamemap_offset;
-	__le32  nnum_partname_mapping;
-	/* Version 17 */
-	__le32 oem_variant;
-};
 
-#ifdef CONFIG_DEBUG_FS
 struct socinfo_params {
 	u32 raw_device_family;
 	u32 hw_plat_subtype;

include/linux/soc/qcom/socinfo.h new file +70 -0

70 lines not on this page · raw message

Signature · 1 line

2.40.1

Robert Marko

author

2023-05-26 20:48 UTC #1 lore raw

PATCH v5 2/5 soc: qcom: smem: Switch to EXPORT_SYMBOL_GPL()

SMEM has been GPL licensed from the start, and there is no reason to use EXPORT_SYMBOL() so switch to the GPL version.

Signed-off-by Robert Marko <[email protected]>

Reviewed-by Konrad Dybcio <[email protected]>

Reviewed-by Trilok Soni <[email protected]>

---
 drivers/soc/qcom/smem.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

drivers/soc/qcom/smem.c +4 -4

index 6be7ea93c78c..bc98520c4969 100644
@@ -500,7 +500,7 @@ int qcom_smem_alloc(unsigned host, unsigned item, size_t size)
 
 	return ret;
 }
-EXPORT_SYMBOL(qcom_smem_alloc);
+EXPORT_SYMBOL_GPL(qcom_smem_alloc);
 
 static void *qcom_smem_get_global(struct qcom_smem *smem,
 				  unsigned item,

@@ -674,7 +674,7 @@ void *qcom_smem_get(unsigned host, unsigned item, size_t *size)
 	return ptr;
 
 }
-EXPORT_SYMBOL(qcom_smem_get);
+EXPORT_SYMBOL_GPL(qcom_smem_get);
 
 /**
  * qcom_smem_get_free_space() - retrieve amount of free space in a partition

@@ -719,7 +719,7 @@ int qcom_smem_get_free_space(unsigned host)
 
 	return ret;
 }
-EXPORT_SYMBOL(qcom_smem_get_free_space);
+EXPORT_SYMBOL_GPL(qcom_smem_get_free_space);
 
 static bool addr_in_range(void __iomem *base, size_t size, void *addr)
 {

@@ -770,7 +770,7 @@ phys_addr_t qcom_smem_virt_to_phys(void *p)
 
 	return 0;
 }
-EXPORT_SYMBOL(qcom_smem_virt_to_phys);
+EXPORT_SYMBOL_GPL(qcom_smem_virt_to_phys);
 
 static int qcom_smem_get_sbl_version(struct qcom_smem *smem)
 {

Signature · 1 line

2.40.1

Robert Marko

author

2023-05-26 20:48 UTC #2 lore raw

PATCH v5 3/5 soc: qcom: smem: introduce qcom_smem_get_soc_id()

In reply to Robert Marko

Introduce a helper to return the SoC SMEM ID, which is used to identify the exact SoC model as there may be differences in the same SoC family.

Currently, cpufreq-nvmem does this completely in the driver and there has been more interest expresed for other drivers to use this information so lets expose a common helper to prevent redoing it in individual drivers since this field is present on every SMEM table version.

Signed-off-by Robert Marko <[email protected]>

---
Changes in v5:
* Convert the __le32 ID to CPU endinaness

Changes in v4:
* Change helper name to qcom_smem_get_soc_id()
* Remove len and just pass NULL, that is sufficient here

Changes in v3:
* Change export to EXPORT_SYMBOL_GPL
* Use an argument for returning SoC ID
* Update kerneldoc

---
 drivers/soc/qcom/smem.c       | 23 +++++++++++++++++++++++
 include/linux/soc/qcom/smem.h |  2 ++
 2 files changed, 25 insertions(+)

drivers/soc/qcom/smem.c +23 -0

index bc98520c4969..b0d59e815c3b 100644
@@ -14,6 +14,7 @@
 #include <linux/sizes.h>
 #include <linux/slab.h>
 #include <linux/soc/qcom/smem.h>
+#include <linux/soc/qcom/socinfo.h>
 
 /*
  * The Qualcomm shared memory system is a allocate only heap structure that

@@ -772,6 +773,28 @@ phys_addr_t qcom_smem_virt_to_phys(void *p)
 }
 EXPORT_SYMBOL_GPL(qcom_smem_virt_to_phys);
 
+/**
+ * qcom_smem_get_soc_id() - return the SoC ID
+ * @id:	On success, we return the SoC ID here.
+ *
+ * Look up SoC ID from HW/SW build ID and return it.
+ *
+ * Return: 0 on success, negative errno on failure.
+ */
+int qcom_smem_get_soc_id(u32 *id)
+{
+	struct socinfo *info;
+
+	info = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_HW_SW_BUILD_ID, NULL);
+	if (IS_ERR(info))
+		return PTR_ERR(info);
+
+	*id = __le32_to_cpu(info->id);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qcom_smem_get_soc_id);
+
 static int qcom_smem_get_sbl_version(struct qcom_smem *smem)
 {
 	struct smem_header *header;

include/linux/soc/qcom/smem.h +2 -0

index 86e1b358688a..223db6a9c733 100644
@@ -11,4 +11,6 @@ int qcom_smem_get_free_space(unsigned host);
 
 phys_addr_t qcom_smem_virt_to_phys(void *p);
 
+int qcom_smem_get_soc_id(u32 *id);
+
 #endif

Signature · 1 line

2.40.1

Konrad Dybcio

Reviewed-by on v5 3/5

2023-05-26 21:05 UTC #3 lore raw

Re: [PATCH v5 3/5] soc: qcom: smem: introduce qcom_smem_get_soc_id()

Quoted 8 lines · Robert Marko

Introduce a helper to return the SoC SMEM ID, which is used to identify the exact SoC model as there may be differences in the same SoC family.
Currently, cpufreq-nvmem does this completely in the driver and there has been more interest expresed for other drivers to use this information so lets expose a common helper to prevent redoing it in individual drivers since this field is present on every SMEM table version.

Quoted 4 lines

Signed-off-by Robert Marko <[email protected]>
---
Changes in v5:
* Convert the __le32 ID to CPU endinaness

Sorry for the confusion in my previous reviews.

Reviewed-by Konrad Dybcio <[email protected]>

Konrad

Quoted 66 lines

Changes in v4:
* Change helper name to qcom_smem_get_soc_id()
* Remove len and just pass NULL, that is sufficient here

Changes in v3:
* Change export to EXPORT_SYMBOL_GPL
* Use an argument for returning SoC ID
* Update kerneldoc

---
 drivers/soc/qcom/smem.c       | 23 +++++++++++++++++++++++
 include/linux/soc/qcom/smem.h |  2 ++
 2 files changed, 25 insertions(+)

drivers/soc/qcom/smem.c +23 -0

index bc98520c4969..b0d59e815c3b 100644
@@ -14,6 +14,7 @@
 #include <linux/sizes.h>
 #include <linux/slab.h>
 #include <linux/soc/qcom/smem.h>
+#include <linux/soc/qcom/socinfo.h>
 
 /*
  * The Qualcomm shared memory system is a allocate only heap structure that

@@ -772,6 +773,28 @@ phys_addr_t qcom_smem_virt_to_phys(void *p)
 }
 EXPORT_SYMBOL_GPL(qcom_smem_virt_to_phys);
 
+/**
+ * qcom_smem_get_soc_id() - return the SoC ID
+ * @id:	On success, we return the SoC ID here.
+ *
+ * Look up SoC ID from HW/SW build ID and return it.
+ *
+ * Return: 0 on success, negative errno on failure.
+ */
+int qcom_smem_get_soc_id(u32 *id)
+{
+	struct socinfo *info;
+
+	info = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_HW_SW_BUILD_ID, NULL);
+	if (IS_ERR(info))
+		return PTR_ERR(info);
+
+	*id = __le32_to_cpu(info->id);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qcom_smem_get_soc_id);
+
 static int qcom_smem_get_sbl_version(struct qcom_smem *smem)
 {
 	struct smem_header *header;

include/linux/soc/qcom/smem.h +2 -0

index 86e1b358688a..223db6a9c733 100644
@@ -11,4 +11,6 @@ int qcom_smem_get_free_space(unsigned host);
 
 phys_addr_t qcom_smem_virt_to_phys(void *p);
 
+int qcom_smem_get_soc_id(u32 *id);
+
 #endif

Kathiravan T

Reviewed-by on v5 3/5

2023-05-27 03:59 UTC #4 lore raw

Re: [PATCH v5 3/5] soc: qcom: smem: introduce qcom_smem_get_soc_id()

In reply to Robert Marko

Quoted 7 lines · Robert Marko

Introduce a helper to return the SoC SMEM ID, which is used to identify the exact SoC model as there may be differences in the same SoC family.
Currently, cpufreq-nvmem does this completely in the driver and there has been more interest expresed for other drivers to use this information so lets expose a common helper to prevent redoing it in individual drivers since this field is present on every SMEM table version.

LGTM,

Reviewed-by Kathiravan T <[email protected]>

Quoted 71 lines

Signed-off-by Robert Marko <[email protected]>

---
Changes in v5:
* Convert the __le32 ID to CPU endinaness

Changes in v4:
* Change helper name to qcom_smem_get_soc_id()
* Remove len and just pass NULL, that is sufficient here

Changes in v3:
* Change export to EXPORT_SYMBOL_GPL
* Use an argument for returning SoC ID
* Update kerneldoc

---
  drivers/soc/qcom/smem.c       | 23 +++++++++++++++++++++++
  include/linux/soc/qcom/smem.h |  2 ++
  2 files changed, 25 insertions(+)

drivers/soc/qcom/smem.c +23 -0

index bc98520c4969..b0d59e815c3b 100644
@@ -14,6 +14,7 @@
  #include <linux/sizes.h>
  #include <linux/slab.h>
  #include <linux/soc/qcom/smem.h>
+#include <linux/soc/qcom/socinfo.h>
 
  /*
   * The Qualcomm shared memory system is a allocate only heap structure that

@@ -772,6 +773,28 @@ phys_addr_t qcom_smem_virt_to_phys(void *p)
  }
  EXPORT_SYMBOL_GPL(qcom_smem_virt_to_phys);
 
+/**
+ * qcom_smem_get_soc_id() - return the SoC ID
+ * @id:	On success, we return the SoC ID here.
+ *
+ * Look up SoC ID from HW/SW build ID and return it.
+ *
+ * Return: 0 on success, negative errno on failure.
+ */
+int qcom_smem_get_soc_id(u32 *id)
+{
+	struct socinfo *info;
+
+	info = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_HW_SW_BUILD_ID, NULL);
+	if (IS_ERR(info))
+		return PTR_ERR(info);
+
+	*id = __le32_to_cpu(info->id);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qcom_smem_get_soc_id);
+
  static int qcom_smem_get_sbl_version(struct qcom_smem *smem)
  {
  	struct smem_header *header;

include/linux/soc/qcom/smem.h +2 -0

index 86e1b358688a..223db6a9c733 100644
@@ -11,4 +11,6 @@ int qcom_smem_get_free_space(unsigned host);
 
  phys_addr_t qcom_smem_virt_to_phys(void *p);
 
+int qcom_smem_get_soc_id(u32 *id);
+
  #endif

Robert Marko

author

2023-05-26 20:48 UTC #5 lore raw

PATCH v5 4/5 cpufreq: qcom-nvmem: use SoC ID-s from bindings

In reply to Robert Marko

SMEM SoC ID-s are now stored in DT bindings so lets use those instead of defining them in the driver again.

Signed-off-by Robert Marko <[email protected]>

Reviewed-by Konrad Dybcio <[email protected]>

Reviewed-by Bjorn Andersson <[email protected]>

Acked-by Viresh Kumar <[email protected]>

---
 drivers/cpufreq/qcom-cpufreq-nvmem.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

drivers/cpufreq/qcom-cpufreq-nvmem.c +5 ~~-10~~

index a577586b23be..60e99be2d3db 100644
@@ -31,12 +31,7 @@
 
 #define MSM_ID_SMEM	137
 
-enum _msm_id {
-	MSM8996V3 = 0xF6ul,
-	APQ8096V3 = 0x123ul,
-	MSM8996SG = 0x131ul,
-	APQ8096SG = 0x138ul,
-};
+#include <dt-bindings/arm/qcom,ids.h>
 
 enum _msm8996_version {
 	MSM8996_V3,

@@ -154,12 +149,12 @@ static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
 	msm_id++;
 
 	switch ((enum _msm_id)*msm_id) {
-	case MSM8996V3:
-	case APQ8096V3:
+	case QCOM_ID_MSM8996:
+	case QCOM_ID_APQ8096:
 		version = MSM8996_V3;
 		break;
-	case MSM8996SG:
-	case APQ8096SG:
+	case QCOM_ID_MSM8996SG:
+	case QCOM_ID_APQ8096SG:
 		version = MSM8996_SG;
 		break;
 	default:

Signature · 1 line

2.40.1

Robert Marko

author

2023-05-26 20:48 UTC #6 lore raw

PATCH v5 5/5 cpufreq: qcom-nvmem: use helper to get SMEM SoC ID

In reply to Robert Marko

Now that SMEM exports a helper to get the SMEM SoC ID lets utilize it. Currently qcom_cpufreq_get_msm_id() is encoding the returned SMEM SoC ID into an enum, however there is no reason to do so and we can just match directly on the SMEM SoC ID as returned by qcom_smem_get_soc_id().

Signed-off-by Robert Marko <[email protected]>

Acked-by Viresh Kumar <[email protected]>

---
Changes in v4:
* Adapt to name change to qcom_smem_get_soc_id()

Changes in v3:
* Adapt to helper using argument now

Changes in v2:
* Utilize helper exported by SMEM instead of refactoring qcom_cpufreq_get_msm_id()

---
 drivers/cpufreq/qcom-cpufreq-nvmem.c | 56 +++++-----------------------
 1 file changed, 10 insertions(+), 46 deletions(-)

drivers/cpufreq/qcom-cpufreq-nvmem.c +10 ~~-46~~

index 60e99be2d3db..a88b6fe5db50 100644
@@ -29,16 +29,8 @@
 #include <linux/slab.h>
 #include <linux/soc/qcom/smem.h>
 
-#define MSM_ID_SMEM	137
-
 #include <dt-bindings/arm/qcom,ids.h>
 
-enum _msm8996_version {
-	MSM8996_V3,
-	MSM8996_SG,
-	NUM_OF_MSM8996_VERSIONS,
-};
-
 struct qcom_cpufreq_drv;
 
 struct qcom_cpufreq_match_data {

@@ -135,60 +127,32 @@ static void get_krait_bin_format_b(struct device *cpu_dev,
 	dev_dbg(cpu_dev, "PVS version: %d\n", *pvs_ver);
 }
 
-static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
-{
-	size_t len;
-	u32 *msm_id;
-	enum _msm8996_version version;
-
-	msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len);
-	if (IS_ERR(msm_id))
-		return NUM_OF_MSM8996_VERSIONS;
-
-	/* The first 4 bytes are format, next to them is the actual msm-id */
-	msm_id++;
-
-	switch ((enum _msm_id)*msm_id) {
-	case QCOM_ID_MSM8996:
-	case QCOM_ID_APQ8096:
-		version = MSM8996_V3;
-		break;
-	case QCOM_ID_MSM8996SG:
-	case QCOM_ID_APQ8096SG:
-		version = MSM8996_SG;
-		break;
-	default:
-		version = NUM_OF_MSM8996_VERSIONS;
-	}
-
-	return version;
-}
-
 static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
 					  struct nvmem_cell *speedbin_nvmem,
 					  char **pvs_name,
 					  struct qcom_cpufreq_drv *drv)
 {
 	size_t len;
+	u32 msm_id;
 	u8 *speedbin;
-	enum _msm8996_version msm8996_version;
+	int ret;
 	*pvs_name = NULL;
 
-	msm8996_version = qcom_cpufreq_get_msm_id();
-	if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
-		dev_err(cpu_dev, "Not Snapdragon 820/821!");
-		return -ENODEV;
-	}
+	ret = qcom_smem_get_soc_id(&msm_id);
+	if (ret)
+		return ret;
 
 	speedbin = nvmem_cell_read(speedbin_nvmem, &len);
 	if (IS_ERR(speedbin))
 		return PTR_ERR(speedbin);
 
-	switch (msm8996_version) {
-	case MSM8996_V3:
+	switch (msm_id) {
+	case QCOM_ID_MSM8996:
+	case QCOM_ID_APQ8096:
 		drv->versions = 1 << (unsigned int)(*speedbin);
 		break;
-	case MSM8996_SG:
+	case QCOM_ID_MSM8996SG:
+	case QCOM_ID_APQ8096SG:
 		drv->versions = 1 << ((unsigned int)(*speedbin) + 4);
 		break;
 	default:

Signature · 1 line

2.40.1

Konrad Dybcio

Reviewed-by on v5 5/5

2023-05-26 21:06 UTC #7 lore raw

Re: [PATCH v5 5/5] cpufreq: qcom-nvmem: use helper to get SMEM SoC ID

Quoted 11 lines · Robert Marko

Now that SMEM exports a helper to get the SMEM SoC ID lets utilize it. Currently qcom_cpufreq_get_msm_id() is encoding the returned SMEM SoC ID into an enum, however there is no reason to do so and we can just match directly on the SMEM SoC ID as returned by qcom_smem_get_soc_id().
Signed-off-by Robert Marko <[email protected]>
Acked-by Viresh Kumar <[email protected]>
---
Changes in v4:
* Adapt to name change to qcom_smem_get_soc_id()

Quoted 7 lines

Changes in v3:
* Adapt to helper using argument now
Changes in v2:
* Utilize helper exported by SMEM instead of refactoring qcom_cpufreq_get_msm_id()
---

Reviewed-by Konrad Dybcio <[email protected]>

Konrad

Quoted 95 lines

 drivers/cpufreq/qcom-cpufreq-nvmem.c | 56 +++++-----------------------
 1 file changed, 10 insertions(+), 46 deletions(-)

drivers/cpufreq/qcom-cpufreq-nvmem.c +10 ~~-46~~

index 60e99be2d3db..a88b6fe5db50 100644
@@ -29,16 +29,8 @@
 #include <linux/slab.h>
 #include <linux/soc/qcom/smem.h>
 
-#define MSM_ID_SMEM	137
-
 #include <dt-bindings/arm/qcom,ids.h>
 
-enum _msm8996_version {
-	MSM8996_V3,
-	MSM8996_SG,
-	NUM_OF_MSM8996_VERSIONS,
-};
-
 struct qcom_cpufreq_drv;
 
 struct qcom_cpufreq_match_data {

@@ -135,60 +127,32 @@ static void get_krait_bin_format_b(struct device *cpu_dev,
 	dev_dbg(cpu_dev, "PVS version: %d\n", *pvs_ver);
 }
 
-static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
-{
-	size_t len;
-	u32 *msm_id;
-	enum _msm8996_version version;
-
-	msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len);
-	if (IS_ERR(msm_id))
-		return NUM_OF_MSM8996_VERSIONS;
-
-	/* The first 4 bytes are format, next to them is the actual msm-id */
-	msm_id++;
-
-	switch ((enum _msm_id)*msm_id) {
-	case QCOM_ID_MSM8996:
-	case QCOM_ID_APQ8096:
-		version = MSM8996_V3;
-		break;
-	case QCOM_ID_MSM8996SG:
-	case QCOM_ID_APQ8096SG:
-		version = MSM8996_SG;
-		break;
-	default:
-		version = NUM_OF_MSM8996_VERSIONS;
-	}
-
-	return version;
-}
-
 static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
 					  struct nvmem_cell *speedbin_nvmem,
 					  char **pvs_name,
 					  struct qcom_cpufreq_drv *drv)
 {
 	size_t len;
+	u32 msm_id;
 	u8 *speedbin;
-	enum _msm8996_version msm8996_version;
+	int ret;
 	*pvs_name = NULL;
 
-	msm8996_version = qcom_cpufreq_get_msm_id();
-	if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
-		dev_err(cpu_dev, "Not Snapdragon 820/821!");
-		return -ENODEV;
-	}
+	ret = qcom_smem_get_soc_id(&msm_id);
+	if (ret)
+		return ret;
 
 	speedbin = nvmem_cell_read(speedbin_nvmem, &len);
 	if (IS_ERR(speedbin))
 		return PTR_ERR(speedbin);
 
-	switch (msm8996_version) {
-	case MSM8996_V3:
+	switch (msm_id) {
+	case QCOM_ID_MSM8996:
+	case QCOM_ID_APQ8096:
 		drv->versions = 1 << (unsigned int)(*speedbin);
 		break;
-	case MSM8996_SG:
+	case QCOM_ID_MSM8996SG:
+	case QCOM_ID_APQ8096SG:
 		drv->versions = 1 << ((unsigned int)(*speedbin) + 4);
 		break;
 	default:

Bjorn Andersson

maintainer Applied

2023-05-27 03:57 UTC #8 lore raw

Re: (subset) [PATCH v5 1/5] soc: qcom: socinfo: move SMEM item struct and defines to a header

In reply to Robert Marko

Quoted 4 lines · Robert Marko

Move SMEM item struct and related defines to a header in order to be able to reuse them in the SMEM driver instead of duplicating them.

Applied, thanks!

[1/5] soc: qcom: socinfo: move SMEM item struct and defines to a header

      commit: ec001bb71e4476f7f5be9db693d5f43e65b9d8cb
[2/5] soc: qcom: smem: Switch to EXPORT_SYMBOL_GPL()
      commit: 10615007483b6938da9df290fe5bf460f6a07c60
[3/5] soc: qcom: smem: introduce qcom_smem_get_soc_id()
      commit: 17051d2c3cd696439adb900e9af547ba162fb982
[4/5] cpufreq: qcom-nvmem: use SoC ID-s from bindings
      commit: 865d7e719262e9845a3c847040fbd4d84c8b5bd9
[5/5] cpufreq: qcom-nvmem: use helper to get SMEM SoC ID
      commit: 7d0f03d104e576da2a7689d0eb8560c67efc03ff

Best regards,

Signature · 1 line

Bjorn Andersson <[email protected]>