arm: dts: imx8mp-beacon-kit: Enable USB Power domains
Subsystems (2)
PATCH 1/1 arm: dts: imx8mp-beacon-kit: Enable USB Power domains
The USB Power domains should not have been removed as it causes the board to hang if the USB is started.
Signed-off-by Adam Ford <[email protected]>
arch/arm/dts/imx8mp-beacon-kit-u-boot.dtsi +0 -2
@@ -185,12 +185,10 @@ &usb3_0 { dma-ranges = <0x40000000 0x40000000 0xc0000000>; - /delete-property/ power-domains; }; &usb3_1 { dma-ranges = <0x40000000 0x40000000 0xc0000000>; - /delete-property/ power-domains; }; &usb_dwc3_0 {
Signature · 1 line
2.39.2
Quoted 5 lines · Adam Ford
The USB Power domains should not have been removed as it causes the board to hang if the USB is started.
Signed-off-by Adam Ford <[email protected]>
Reviewed-by Fabio Estevam <[email protected]>
PATCH 1/1 arm: dts: imx8mp-beacon-kit: Enable USB Power domains
In reply to Adam FordQuoted 11 lines
The USB Power domains should not have been removed as it causes the board to hang if the USB is started.
Signed-off-by Adam Ford <[email protected]>Reviewed-by Fabio Estevam <[email protected]>arch/arm/dts/imx8mp-beacon-kit-u-boot.dtsi +0
-0@@ -185,12 +185,10 @@ &usb3_0 {
arch/arm/dts/imx8mp-beacon-kit-u-boot.dtsi line 194
Quoted 10 lines
arch/arm/dts/imx8mp-beacon-kit-u-boot.dtsi +0
-2dma-ranges = <0x40000000 0x40000000 0xc0000000>; - /delete-property/ power-domains; }; &usb3_1 { dma-ranges = <0x40000000 0x40000000 0xc0000000>; - /delete-property/ power-domains; }; &usb_dwc3_0 {
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================