wifi: mt76: mt7921: Support temp sensor
Subsystems (2)
PATCH v3 1/1 wifi: mt76: mt7921: Support temp sensor
From: Ben Greear <[email protected]>
Allow sensors tool to read radio's temperature, example:
mt7921_phy17-pci-1800
Adapter: PCI adapter
temp1: +72.0°C
Signed-off-by Ben Greear <[email protected]>
---
v3: Fix patch title
Fix spelling of Celsius
.../net/wireless/mediatek/mt76/mt7921/init.c | 57 +++++++++++++++++++ .../net/wireless/mediatek/mt76/mt7921/mcu.c | 17 ++++++ .../wireless/mediatek/mt76/mt7921/mt7921.h | 1 + 3 files changed, 75 insertions(+)
drivers/net/wireless/mediatek/mt76/mt7921/init.c +57 -0
@@ -2,6 +2,9 @@/* Copyright (C) 2020 MediaTek Inc. */ #include <linux/etherdevice.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/thermal.h> #include <linux/firmware.h> #include "mt7921.h" #include "../mt76_connac2_mac.h"
@@ -58,6 +61,54 @@ static const struct ieee80211_iface_combination if_comb_chanctx[] = { } }; +static ssize_t mt7921_thermal_temp_show (struct device *dev, +struct device_attribute *attr, +char *buf) +{ +switch (to_sensor_dev_attr (attr)->index) { +case 0 : { +struct mt7921_phy *phy =dev_get_drvdata (dev); +struct mt7921_dev *mdev = phy->dev; +int temperature; + +mt7921_mutex_acquire (mdev); + temperature =mt7921_mcu_get_temperature (phy); +mt7921_mutex_release (mdev); + +if (temperature <0 ) +return temperature; +/* display in millidegree Celsius */ +return sprintf (buf,"%u\n" , temperature *1000 ); + } +default : +return -EINVAL ; + } +} +static SENSOR_DEVICE_ATTR_RO(temp1_input, mt7921_thermal_temp, 0); + +static struct attribute *mt7921_hwmon_attrs[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, +NULL , +}; +ATTRIBUTE_GROUPS (mt7921_hwmon); + +static int mt7921_thermal_init (struct mt7921_phy *phy) +{ +struct wiphy *wiphy = phy->mt76->hw->wiphy; +struct device *hwmon; +const char *name; + + name =devm_kasprintf (&wiphy->dev,GFP_KERNEL ,"mt7921_%s" , +wiphy_name (wiphy)); + + hwmon =devm_hwmon_device_register_with_groups (&wiphy->dev, name, phy, + mt7921_hwmon_groups); +if (IS_ERR (hwmon)) +return PTR_ERR (hwmon); + +return 0 ; +} +static void mt7921_regd_notifier (struct wiphy *wiphy,struct regulatory_request *request)
@@ -384,6 +435,12 @@ static void mt7921_init_work(struct work_struct *work)return ; } + ret =mt7921_thermal_init (&dev->phy); +if (ret) { +dev_err (dev->mt76.dev,"thermal_init failed\n" ); +return ; + } +/* we support chip reset now */ dev->hw_init_done = true;
drivers/net/wireless/mediatek/mt76/mt7921/mcu.c +17 -0
@@ -1346,6 +1346,23 @@ int mt7921_mcu_set_clc(struct mt7921_dev *dev, u8 *alpha2,return 0 ; } +int mt7921_mcu_get_temperature (struct mt7921_phy *phy) +{ +struct mt7921_dev *dev = phy->dev; +struct { +u8 ctrl_id; +u8 action; +u8 band_idx; +u8 rsv[5 ]; + } req = { + .ctrl_id =THERMAL_SENSOR_TEMP_QUERY , + .band_idx = phy->mt76->band_idx, + }; + +return mt76_mcu_send_msg (&dev->mt76,MCU_EXT_CMD (THERMAL_CTRL ), &req, +sizeof (req), true); +} +int mt7921_mcu_set_rxfilter (struct mt7921_dev *dev,u32 fif,u8 bit_op,u32 bit_map) {
drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h +1 -0
@@ -568,6 +568,7 @@ int mt7921_mcu_set_sniffer(struct mt7921_dev *dev, struct ieee80211_vif *vif, bool enable);int mt7921_mcu_config_sniffer (struct mt7921_vif *vif,struct ieee80211_chanctx_conf *ctx); +int mt7921_mcu_get_temperature (struct mt7921_phy *phy); int mt7921_usb_sdio_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr, enum mt76_txq_id qid, struct mt76_wcid *wcid,
Signature · 1 line
2.40.0