Skip to contentSkip to conversation

configs: j721s2_evm_r5_defconfig: Increase malloc pool size in DRAM

PATCH In review Udit Kumar 1 participant 3 messages Jun 5, 2023

lore
Share & tools
lore

Udit Kumar

author
#0 lore raw

PATCH 1/2 configs: j721s2_evm_r5_defconfig: Increase malloc pool size in DRAM

The malloc capacity in DRAM at R5 SPL is set to 1MB which isn't sufficient to load the new tispl.bin to
enable loading of tispl.bin the size is increased by 256KB to 1.25MB.

Cc Manorit Chawdhry <[email protected]>
Cc Neha Francis <[email protected]>
Cc Vignesh Raghavendra <[email protected]>
Cc Nikhil M Jain <[email protected]>
Cc Kamlesh Gurudasani <[email protected]>

---
Uboot was getting stuck at below
U-Boot SPL 2023.04-g495e929147 (Jun 03 2023 - 04:02:26 +0000) SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.3--1-g2249f (Chill Capybara') SPL initial stack usage: 13424 bytes
Trying to boot from MMC2
alloc space exhausted
spl_load_image_ext: ext4fs mount err - 0
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

With patch
boot logs: http://serenity.dal.design.ti.com:7777/jidenicozi.yaml

 configs/j721s2_evm_r5_defconfig | 1 +
 1 file changed, 1 insertion(+)
configs/j721s2_evm_r5_defconfig +1 -0
index c197504eec..6910705d59 100644
@@ -178,3 +178,4 @@ CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
 CONFIG_PANIC_HANG=y
 CONFIG_LIB_RATIONAL=y
 CONFIG_SPL_LIB_RATIONAL=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x140000
Signature · 7 lines
2.34.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author
#1 lore raw

PATCH 2/2 configs: j784s4_evm_r5_defconfig: Increase malloc pool size in DRAM

The malloc capacity in DRAM at R5 SPL is set to 1MB which isn't sufficient to load the new tispl.bin to
enable loading of tispl.bin the size is increased by 256KB to 1.25MB.

Cc Apurva Nandan <[email protected]>
Cc Neha Francis <[email protected]>
Cc Vignesh Raghavendra <[email protected]>
Cc Nikhil M Jain <[email protected]>
Cc Kamlesh Gurudasani <[email protected]>

---
uboot was getting stuck at
U-Boot SPL 2023.04-g495e929147 (Jun 03 2023 - 04:02:26 +0000) SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.3--1-g2249f (Chill Capybara') SPL initial stack usage: 13424 bytes
Trying to boot from MMC2
alloc space exhausted
spl_load_image_ext: ext4fs mount err - 0
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

Boot logs with patch
http://serenity.dal.design.ti.com:7777/sifosahowi.yaml

 configs/j784s4_evm_r5_defconfig | 1 +
 1 file changed, 1 insertion(+)
configs/j784s4_evm_r5_defconfig +1 -0
index d121671ef5..7f1baebe3e 100644
@@ -178,3 +178,4 @@ CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
 CONFIG_PANIC_HANG=y
 CONFIG_LIB_RATIONAL=y
 CONFIG_SPL_LIB_RATIONAL=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x140000
Signature · 7 lines
2.34.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#2 lore raw
In reply to Udit Kumar

Please ignore below series, sent by mistake.

Thanks
Udit

Quoted 41 lines

-----Original Message-----
From: Kumar, Udit <[email protected]>
Sent: Monday, June 5, 2023 12:17 PM
To: [email protected]
Cc: Hambardzumyan, Minas <[email protected]>; Kumar, Udit <u- [email protected]>; Chawdhry, Manorit <[email protected]>; Francis, Neha <[email protected]>; Raghavendra, Vignesh <[email protected]>; Jain, Nikhil <[email protected]>; Gurudasani, Kamlesh <[email protected]>
Subject: [PATCH 1/2] configs: j721s2_evm_r5_defconfig: Increase malloc pool size in DRAM

The malloc capacity in DRAM at R5 SPL is set to 1MB which isn't sufficient to load the new tispl.bin to enable loading of tispl.bin the size is increased by 256KB to 1.25MB.

Cc Manorit Chawdhry <[email protected]>
Cc Neha Francis <[email protected]>
Cc Vignesh Raghavendra <[email protected]>
Cc Nikhil M Jain <[email protected]>
Cc Kamlesh Gurudasani <[email protected]>

---
Uboot was getting stuck at below
U-Boot SPL 2023.04-g495e929147 (Jun 03 2023 - 04:02:26 +0000) SYSFW ABI:
3.1 (firmware rev 0x0008 '8.6.3--1-g2249f (Chill Capybara') SPL initial stack
usage: 13424 bytes Trying to boot from MMC2 alloc space exhausted
spl_load_image_ext: ext4fs mount err - 0
SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ###

With patch
boot logs: http://serenity.dal.design.ti.com:7777/jidenicozi.yaml

configs/j721s2_evm_r5_defconfig | 1 +

1 file changed, 1 insertion(+)
(quoted diff) +0 -0

b/configs/j721s2_evm_r5_defconfig index c197504eec..6910705d59 100644

configs/j721s2_evm_r5_defconfig +0 -0
@@ -178,3 +178,4 @@ CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
Quoted 5 lines

CONFIG_PANIC_HANG=y CONFIG_LIB_RATIONAL=y
CONFIG_SPL_LIB_RATIONAL=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x140000
--
2.34.1

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel