Skip to contentSkip to conversation

spi: s3c64xx: Cleanups

PATCH In review Andi Shyti 2 participants 4 messages Jun 6, 2023 – Jun 7, 2023

Subsystems (3)
lore
Share & tools
lore

Andi Shyti

author maintainer
#0 lore raw

cover spi: s3c64xx: Cleanups

Hi,

two small cleanups in the probe function. The first puts in use the managed spi master allocation while the second implements the dev_err_probe() function.

Thanks,
Andi

Andi Shyti (2):
spi: s3c64xx: Use the managed spi master allocation function
spi: s3c64xx: Use dev_err_probe()

 drivers/spi/spi-s3c64xx.c | 81 +++++++++++++++------------------------
 1 file changed, 30 insertions(+), 51 deletions(-)
Signature · 1 line
2.40.1
author maintainer
#1 lore raw

PATCH 1/2 spi: s3c64xx: Use the managed spi master allocation function

Use devm_spi_alloc_master() and get rid of one goto error path

---
 drivers/spi/spi-s3c64xx.c | 26 ++++++++------------------
 1 file changed, 8 insertions(+), 18 deletions(-)
drivers/spi/spi-s3c64xx.c +8 -18
index d5ec32bda1587..787a89c046860 100644
@@ -1177,8 +1177,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
 		return irq;
 	}
 
-	master = spi_alloc_master(&pdev->dev,
-				sizeof(struct s3c64xx_spi_driver_data));
+	master = devm_spi_alloc_master(&pdev->dev, sizeof(*sdd));
 	if (master == NULL) {
 		dev_err(&pdev->dev, "Unable to allocate SPI Master\n");
 		return -ENOMEM;
@@ -1197,7 +1196,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
 		if (ret < 0) {
 			dev_err(&pdev->dev, "failed to get alias id, errno %d\n",
 				ret);
-			goto err_deref_master;
+			return ret;
 		}
 		sdd->port_id = ret;
 	} else {
@@ -1232,23 +1231,19 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
 		master->can_dma = s3c64xx_spi_can_dma;
 
 	sdd->regs = devm_ioremap_resource(&pdev->dev, mem_res);
-	if (IS_ERR(sdd->regs)) {
-		ret = PTR_ERR(sdd->regs);
-		goto err_deref_master;
-	}
+	if (IS_ERR(sdd->regs))
+		return PTR_ERR(sdd->regs);
 
 	if (sci->cfg_gpio && sci->cfg_gpio()) {
 		dev_err(&pdev->dev, "Unable to config gpio\n");
-		ret = -EBUSY;
-		goto err_deref_master;
+		return -EBUSY;
 	}
 
 	/* Setup clocks */
 	sdd->clk = devm_clk_get_enabled(&pdev->dev, "spi");
 	if (IS_ERR(sdd->clk)) {
 		dev_err(&pdev->dev, "Unable to acquire clock 'spi'\n");
-		ret = PTR_ERR(sdd->clk);
-		goto err_deref_master;
+		return PTR_ERR(sdd->clk);
 	}
 
 	sprintf(clk_name, "spi_busclk%d", sci->src_clk_nr);
@@ -1256,16 +1251,14 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
 	if (IS_ERR(sdd->src_clk)) {
 		dev_err(&pdev->dev,
 			"Unable to acquire clock '%s'\n", clk_name);
-		ret = PTR_ERR(sdd->src_clk);
-		goto err_deref_master;
+		return PTR_ERR(sdd->src_clk);
 	}
 
 	if (sdd->port_conf->clk_ioclk) {
 		sdd->ioclk = devm_clk_get_enabled(&pdev->dev, "spi_ioclk");
 		if (IS_ERR(sdd->ioclk)) {
 			dev_err(&pdev->dev, "Unable to acquire 'ioclk'\n");
-			ret = PTR_ERR(sdd->ioclk);
-			goto err_deref_master;
+			return PTR_ERR(sdd->ioclk);
 		}
 	}
 
@@ -1314,9 +1307,6 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_set_suspended(&pdev->dev);
 
-err_deref_master:
-	spi_master_put(master);
-
 	return ret;
 }
 
Signature · 1 line
2.40.1
author maintainer
#2 lore raw

PATCH 2/2 spi: s3c64xx: Use dev_err_probe()

In reply to Andi Shyti

Simplify the code by using dev_err_probe() instead of dev_err() and 'return'.

---
 drivers/spi/spi-s3c64xx.c | 65 ++++++++++++++++-----------------------
 1 file changed, 27 insertions(+), 38 deletions(-)
drivers/spi/spi-s3c64xx.c +27 -38
index 787a89c046860..fd55697144cc2 100644
@@ -1160,28 +1160,23 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
 			return PTR_ERR(sci);
 	}
 
-	if (!sci) {
-		dev_err(&pdev->dev, "platform_data missing!\n");
-		return -ENODEV;
-	}
+	if (!sci)
+		return dev_err_probe(&pdev->dev, -ENODEV,
+				     "Platform_data missing!\n");
 
 	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (mem_res == NULL) {
-		dev_err(&pdev->dev, "Unable to get SPI MEM resource\n");
-		return -ENXIO;
-	}
+	if (!mem_res)
+		return dev_err_probe(&pdev->dev, -ENXIO,
+				     "Unable to get SPI MEM resource\n");
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_warn(&pdev->dev, "Failed to get IRQ: %d\n", irq);
-		return irq;
-	}
+	if (irq < 0)
+		return dev_err_probe(&pdev->dev, irq, "Failed to get IRQ\n");
 
 	master = devm_spi_alloc_master(&pdev->dev, sizeof(*sdd));
-	if (master == NULL) {
-		dev_err(&pdev->dev, "Unable to allocate SPI Master\n");
-		return -ENOMEM;
-	}
+	if (!master)
+		return dev_err_probe(&pdev->dev, -ENOMEM,
+				     "Unable to allocate SPI Master\n");
 
 	platform_set_drvdata(pdev, master);
 
@@ -1193,11 +1188,9 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
 	sdd->sfr_start = mem_res->start;
 	if (pdev->dev.of_node) {
 		ret = of_alias_get_id(pdev->dev.of_node, "spi");
-		if (ret < 0) {
-			dev_err(&pdev->dev, "failed to get alias id, errno %d\n",
-				ret);
-			return ret;
-		}
+		if (ret < 0)
+			return dev_err_probe(&pdev->dev, ret,
+					     "Failed to get alias id\n");
 		sdd->port_id = ret;
 	} else {
 		sdd->port_id = pdev->id;
@@ -1234,32 +1227,28 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
 	if (IS_ERR(sdd->regs))
 		return PTR_ERR(sdd->regs);
 
-	if (sci->cfg_gpio && sci->cfg_gpio()) {
-		dev_err(&pdev->dev, "Unable to config gpio\n");
-		return -EBUSY;
-	}
+	if (sci->cfg_gpio && sci->cfg_gpio())
+		return dev_err_probe(&pdev->dev, -EBUSY,
+				     "Unable to config gpio\n");
 
 	/* Setup clocks */
 	sdd->clk = devm_clk_get_enabled(&pdev->dev, "spi");
-	if (IS_ERR(sdd->clk)) {
-		dev_err(&pdev->dev, "Unable to acquire clock 'spi'\n");
-		return PTR_ERR(sdd->clk);
-	}
+	if (IS_ERR(sdd->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(sdd->clk),
+				     "Unable to acquire clock 'spi'\n");
 
 	sprintf(clk_name, "spi_busclk%d", sci->src_clk_nr);
 	sdd->src_clk = devm_clk_get_enabled(&pdev->dev, clk_name);
-	if (IS_ERR(sdd->src_clk)) {
-		dev_err(&pdev->dev,
-			"Unable to acquire clock '%s'\n", clk_name);
-		return PTR_ERR(sdd->src_clk);
-	}
+	if (IS_ERR(sdd->src_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(sdd->src_clk),
+				     "Unable to acquire clock '%s'\n",
+				     clk_name);
 
 	if (sdd->port_conf->clk_ioclk) {
 		sdd->ioclk = devm_clk_get_enabled(&pdev->dev, "spi_ioclk");
-		if (IS_ERR(sdd->ioclk)) {
-			dev_err(&pdev->dev, "Unable to acquire 'ioclk'\n");
-			return PTR_ERR(sdd->ioclk);
-		}
+		if (IS_ERR(sdd->ioclk))
+			return dev_err_probe(&pdev->dev, PTR_ERR(sdd->ioclk),
+					     "Unable to acquire 'ioclk'\n");
 	}
 
 	pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT);
Signature · 1 line
2.40.1
maintainer
#3 lore raw
In reply to Andi Shyti
Quoted 8 lines · Andi Shyti

two small cleanups in the probe function. The first puts in use the managed spi master allocation while the second implements the dev_err_probe() function.

Thanks,
Andi

[...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/2] spi: s3c64xx: Use the managed spi master allocation function

      commit: 76fbad410c0fed0c203c22e7e5ef8455725f3338
[2/2] spi: s3c64xx: Use dev_err_probe()
      commit: b4f273774c8b2b7c6f5e0cb9b18a234a8ca322b4

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark