btrfs: add a test case to verify read-only scrub
PATCH 1/1 btrfs: add a test case to verify read-only scrub
There is a regression on btrfs read-only scrub behavior.
The commit e02ee89baa66 ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure") makes btrfs scrub to ignore the read-only flag completely, causing scrub to always fix the corruption.
This test case would create an fs with repairable corruptions, then run a read-only scrub, and finally to make sure the corruption is not repaired.
--- tests/btrfs/288 | 65 +++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/288.out | 39 +++++++++++++++++++++++++++ 2 files changed, 104 insertions(+) create mode 100755 tests/btrfs/288 create mode 100644 tests/btrfs/288.out
tests/btrfs/288 new file +65 -0
@@ -0,0 +1,65 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2023 SUSE Linux Products GmbH. All Rights Reserved. +# +# FS QA Test 288 +# +# Make sure btrfs-scrub respects the read-only flag. +# +. ./common/preamble +_begin_fstest auto repair quick volume scrub + +# For filedefrag and all the filters +. ./common/filter + +# real QA test starts here + +# Modify as appropriate. +_supported_fs btrfs +_require_scratch_dev_pool 2 + +_require_odirect +# Overwriting data is forbidden on a zoned block device +_require_non_zoned_device "${SCRATCH_DEV}" + +_scratch_dev_pool_get 2 + +# Step 1, create a raid btrfs with one 128K file +echo "step 1......mkfs.btrfs" +_scratch_pool_mkfs -d raid1 -b 1G >> $seqres.full 2>&1 +_scratch_mount + +$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" |\ + _filter_xfs_io_offset + +# Step 2, corrupt one mirror so we can still repair the fs. +echo "step 2......corrupt one mirror" +# ensure btrfs-map-logical sees the tree updates +sync + +logical=$(_btrfs_get_first_logical $SCRATCH_MNT/foobar) + +physical1=$(_btrfs_get_physical ${logical} 1) +devpath1=$(_btrfs_get_device_path ${logical} 1) + +_scratch_unmount + +echo " corrupt stripe #1, devpath $devpath1 physical $physical1" \ + >> $seqres.full +$XFS_IO_PROG -d -c "pwrite -S 0xf1 -b 64K $physical1 64K" $devpath1 \ + > /dev/null + + +# Step 3, do a read-only scrub, which should not fix the corruption. +_scratch_mount -o ro +$BTRFS_UTIL_PROG scrub start -BRrd $SCRATCH_MNT >> $seqres.full 2>&1 +_scratch_unmount + +# Step 4, make sure the corruption is still there +$XFS_IO_PROG -d -c "pread -v -b 512 $physical1 512" $devpath1 |\ + _filter_xfs_io_offset + +_scratch_dev_pool_put +# success, all done +status=0 +exit
tests/btrfs/288.out new file +39 -0
@@ -0,0 +1,39 @@ +QA output created by 288 +step 1......mkfs.btrfs +wrote 131072/131072 bytes +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +step 2......corrupt one mirror +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +read 512/512 bytes +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
Signature · 1 line
2.39.0
Quoted 27 lines · Qu Wenruo
There is a regression on btrfs read-only scrub behavior.
The commit
e02ee89baa66("btrfs: scrub: switchscrub_simple_mirror()toscrub_stripeinfrastructure") makes btrfs scrub to ignore the read-only flag completely, causing scrub to always fix the corruption.This test case would create an fs with repairable corruptions, then run a read-only scrub, and finally to make sure the corruption is not repaired.
Signed-off-by Qu Wenruo <[email protected]>--- tests/btrfs/288 | 65 +++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/288.out | 39 +++++++++++++++++++++++++++ 2 files changed, 104 insertions(+) create mode 100755 tests/btrfs/288 create mode 100644 tests/btrfs/288.outtests/btrfs/288 new file +2
-0@@ -0,0 +1,65 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0
tests/btrfs/288 line 12
Quoted 10 lines
tests/btrfs/288 new file +10
-0+# Copyright (C) 2023 SUSE Linux Products GmbH. All Rights Reserved. +# +# FS QA Test 288 +# +# Make sure btrfs-scrub respects the read-only flag. +# +. ./common/preamble +_begin_fstest auto repair quick volume scrub + +# For filedefrag and all the filters
This comment is a bit confusing. File defrag? The test doesn't exercise defrag. Probably just leaving the comment out is better, it's obvious since we are using filters.
tests/btrfs/288 line 23
Quoted 11 lines
tests/btrfs/288 new file +11
-0+. ./common/filter + +# real QA test starts here + +# Modify as appropriate. +_supported_fs btrfs +_require_scratch_dev_pool 2 + +_require_odirect +# Overwriting data is forbidden on a zoned block device +_require_non_zoned_device "${SCRATCH_DEV}"
Can we please get a _fixed_by_kernel_commit call to identify the patch that fixes the regression?
tests/btrfs/288 line 33
Quoted 10 lines
tests/btrfs/288 new file +10
-0+ +_scratch_dev_pool_get 2 + +# Step 1, create a raid btrfs with one 128K file +echo "step 1......mkfs.btrfs" +_scratch_pool_mkfs -d raid1 -b 1G >> $seqres.full 2>&1 +_scratch_mount + +$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" |\ + _filter_xfs_io_offset
So why do we filter offsets?
Why not just a plain _filter_xfs_io as we most commonly do?
Thanks.
Quoted 80 lines
tests/btrfs/288 new file +32
-0+ +# Step 2, corrupt one mirror so we can still repair the fs. +echo "step 2......corrupt one mirror" +# ensure btrfs-map-logical sees the tree updates +sync + +logical=$(_btrfs_get_first_logical $SCRATCH_MNT/foobar) + +physical1=$(_btrfs_get_physical ${logical} 1) +devpath1=$(_btrfs_get_device_path ${logical} 1) + +_scratch_unmount + +echo " corrupt stripe #1, devpath $devpath1 physical $physical1" \ + >> $seqres.full +$XFS_IO_PROG -d -c "pwrite -S 0xf1 -b 64K $physical1 64K" $devpath1 \ + > /dev/null + + +# Step 3, do a read-only scrub, which should not fix the corruption. +_scratch_mount -o ro +$BTRFS_UTIL_PROG scrub start -BRrd $SCRATCH_MNT >> $seqres.full 2>&1 +_scratch_unmount + +# Step 4, make sure the corruption is still there +$XFS_IO_PROG -d -c "pread -v -b 512 $physical1 512" $devpath1 |\ + _filter_xfs_io_offset + +_scratch_dev_pool_put +# success, all done +status=0 +exittests/btrfs/288.out new file +39
-1@@ -0,0 +1,39 @@ +QA output created by 288 +step 1......mkfs.btrfs +wrote 131072/131072 bytes +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +step 2......corrupt one mirror +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +read 512/512 bytes +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) --2.39.0
Quoted 43 lines · Filipe Manana
Quoted 27 lines · Qu Wenruo
There is a regression on btrfs read-only scrub behavior.
The commit
e02ee89baa66("btrfs: scrub: switchscrub_simple_mirror()toscrub_stripeinfrastructure") makes btrfs scrub to ignore the read-only flag completely, causing scrub to always fix the corruption.This test case would create an fs with repairable corruptions, then run a read-only scrub, and finally to make sure the corruption is not repaired.
Signed-off-by Qu Wenruo <[email protected]>--- tests/btrfs/288 | 65 +++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/288.out | 39 +++++++++++++++++++++++++++ 2 files changed, 104 insertions(+)create mode 100755 tests/btrfs/288
create mode 100644 tests/btrfs/288.outtests/btrfs/288 new file +2
-0@@ -0,0 +1,65 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0tests/btrfs/288 line 12
Quoted 10 lines
tests/btrfs/288 new file +10
-0+# Copyright (C) 2023 SUSE Linux Products GmbH. All Rights Reserved. +# +# FS QA Test 288 +# +# Make sure btrfs-scrub respects the read-only flag. +# +. ./common/preamble +_begin_fstest auto repair quick volume scrub + +# For filedefrag and all the filtersThis comment is a bit confusing. File defrag? The test doesn't exercise defrag. Probably just leaving the comment out is better, it's obvious since we are using filters.
Quoted 14 lines
tests/btrfs/288 line 23
Quoted 11 lines
tests/btrfs/288 new file +11
-0+. ./common/filter + +# real QA test starts here + +# Modify as appropriate. +_supported_fs btrfs +_require_scratch_dev_pool 2 + +_require_odirect +# Overwriting data is forbidden on a zoned block device +_require_non_zoned_device "${SCRATCH_DEV}"Can we please get a
_fixed_by_kernel_commitcall to identify the patch that fixes the regression?
Unfortunately it's not yet merged, we only have the offending commit.
Quoted 14 lines
tests/btrfs/288 line 33
Quoted 11 lines
tests/btrfs/288 new file +10
-0+ +_scratch_dev_pool_get 2 + +# Step 1, create a raid btrfs with one 128K file +echo "step 1......mkfs.btrfs" +_scratch_pool_mkfs -d raid1 -b 1G >> $seqres.full 2>&1 +_scratch_mount + +$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" |\ + _filter_xfs_io_offsetSo why do we filter offsets?
Why not just a plain_filter_xfs_ioas we most commonly do?
Oh yep, that's better.
Thanks for the review,
Qu
Quoted 83 lines
Thanks.
Quoted 80 lines
tests/btrfs/288 new file +32
-0+ +# Step 2, corrupt one mirror so we can still repair the fs. +echo "step 2......corrupt one mirror" +# ensure btrfs-map-logical sees the tree updates +sync + +logical=$(_btrfs_get_first_logical $SCRATCH_MNT/foobar) + +physical1=$(_btrfs_get_physical ${logical} 1) +devpath1=$(_btrfs_get_device_path ${logical} 1) + +_scratch_unmount + +echo " corrupt stripe #1, devpath $devpath1 physical $physical1" \ + >> $seqres.full +$XFS_IO_PROG -d -c "pwrite -S 0xf1 -b 64K $physical1 64K" $devpath1 \ + > /dev/null + + +# Step 3, do a read-only scrub, which should not fix the corruption. +_scratch_mount -o ro +$BTRFS_UTIL_PROG scrub start -BRrd $SCRATCH_MNT >> $seqres.full 2>&1 +_scratch_unmount + +# Step 4, make sure the corruption is still there +$XFS_IO_PROG -d -c "pread -v -b 512 $physical1 512" $devpath1 |\ + _filter_xfs_io_offset + +_scratch_dev_pool_put +# success, all done +status=0 +exittests/btrfs/288.out new file +39
-1@@ -0,0 +1,39 @@ +QA output created by 288 +step 1......mkfs.btrfs +wrote 131072/131072 bytes +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +step 2......corrupt one mirror +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +read 512/512 bytes +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) --2.39.0
Quoted 62 lines · Qu Wenruo
Quoted 43 lines · Filipe Manana
Quoted 27 lines · Qu Wenruo
There is a regression on btrfs read-only scrub behavior.
The commit
e02ee89baa66("btrfs: scrub: switchscrub_simple_mirror()toscrub_stripeinfrastructure") makes btrfs scrub to ignore the read-only flag completely, causing scrub to always fix the corruption.This test case would create an fs with repairable corruptions, then run a read-only scrub, and finally to make sure the corruption is not repaired.
Signed-off-by Qu Wenruo <[email protected]>--- tests/btrfs/288 | 65 +++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/288.out | 39 +++++++++++++++++++++++++++ 2 files changed, 104 insertions(+)create mode 100755 tests/btrfs/288
create mode 100644 tests/btrfs/288.outtests/btrfs/288 new file +2
-0@@ -0,0 +1,65 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0tests/btrfs/288 line 12
Quoted 10 lines
tests/btrfs/288 new file +10
-0+# Copyright (C) 2023 SUSE Linux Products GmbH. All Rights Reserved. +# +# FS QA Test 288 +# +# Make sure btrfs-scrub respects the read-only flag. +# +. ./common/preamble +_begin_fstest auto repair quick volume scrub + +# For filedefrag and all the filtersThis comment is a bit confusing. File defrag? The test doesn't exercise defrag. Probably just leaving the comment out is better, it's obvious since we are using filters.
Quoted 14 lines
tests/btrfs/288 line 23
Quoted 11 lines
tests/btrfs/288 new file +11
-0+. ./common/filter + +# real QA test starts here + +# Modify as appropriate. +_supported_fs btrfs +_require_scratch_dev_pool 2 + +_require_odirect +# Overwriting data is forbidden on a zoned block device +_require_non_zoned_device "${SCRATCH_DEV}"Can we please get a
_fixed_by_kernel_commitcall to identify the patch that fixes the regression?
Quoted 1 line
Unfortunately it's not yet merged, we only have the offending commit.
Yes, I know. But you can still use it, and we normally do it. Just use "xxxxxxxxxxxx" as the commit id and leave the patch's subject.
Quoted 104 lines
Quoted 15 lines
tests/btrfs/288 line 33
Quoted 12 lines
tests/btrfs/288 new file +10
-0+ +_scratch_dev_pool_get 2 + +# Step 1, create a raid btrfs with one 128K file +echo "step 1......mkfs.btrfs" +_scratch_pool_mkfs -d raid1 -b 1G >> $seqres.full 2>&1 +_scratch_mount + +$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" |\ + _filter_xfs_io_offsetSo why do we filter offsets?
Why not just a plain_filter_xfs_ioas we most commonly do?Oh yep, that's better.
Thanks for the review,
QuQuoted 83 lines
Thanks.
Quoted 80 lines
tests/btrfs/288 new file +32
-0+ +# Step 2, corrupt one mirror so we can still repair the fs. +echo "step 2......corrupt one mirror" +# ensure btrfs-map-logical sees the tree updates +sync + +logical=$(_btrfs_get_first_logical $SCRATCH_MNT/foobar) + +physical1=$(_btrfs_get_physical ${logical} 1) +devpath1=$(_btrfs_get_device_path ${logical} 1) + +_scratch_unmount + +echo " corrupt stripe #1, devpath $devpath1 physical $physical1" \ + >> $seqres.full +$XFS_IO_PROG -d -c "pwrite -S 0xf1 -b 64K $physical1 64K" $devpath1 \ + > /dev/null + + +# Step 3, do a read-only scrub, which should not fix the corruption. +_scratch_mount -o ro +$BTRFS_UTIL_PROG scrub start -BRrd $SCRATCH_MNT >> $seqres.full 2>&1 +_scratch_unmount + +# Step 4, make sure the corruption is still there +$XFS_IO_PROG -d -c "pread -v -b 512 $physical1 512" $devpath1 |\ + _filter_xfs_io_offset + +_scratch_dev_pool_put +# success, all done +status=0 +exittests/btrfs/288.out new file +39
-1@@ -0,0 +1,39 @@ +QA output created by 288 +step 1......mkfs.btrfs +wrote 131072/131072 bytes +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +step 2......corrupt one mirror +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +XXXXXXXX: f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 f1 ................ +read 512/512 bytes +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) --2.39.0