drivers: usb: musb: musb_gadget: Removed unneeded code
Subsystems (2)
PATCH 1/1 drivers: usb: musb: musb_gadget: Removed unneeded code
Removed the static int musb_gadget_vbus_session function as it was doing nothing.It has reduced 13 lines of code
--- drivers/usb/musb/musb_gadget.c | 13 ------------- 1 file changed, 13 deletions(-)
drivers/usb/musb/musb_gadget.c +0 -13
@@ -1612,19 +1612,6 @@ static void musb_pullup(struct musb *musb, int is_on)musb_writeb (musb->mregs,MUSB_POWER , power); } -#if 0 -static int musb_gadget_vbus_session (struct usb_gadget *gadget,int is_active) -{ -musb_dbg (musb,"<= %s =>\n" , __func__); - -/* -* FIXME iff driver's softconnect flag is set (as it is during probe, -* though that can clear it), just musb_pullup(). -*/ - -return -EINVAL ; -} -#endif static int musb_gadget_vbus_draw (struct usb_gadget *gadget,unsigned mA) {
Signature · 1 line
2.40.1
Greg KH
maintainerQuoted 35 lines · Neel Chakraborty
Removed the static int
musb_gadget_vbus_sessionfunction as it was doing nothing.It has reduced 13 lines of codeSigned-off-by Neel Chakraborty <[email protected]>--- drivers/usb/musb/musb_gadget.c | 13 ------------- 1 file changed, 13 deletions(-)drivers/usb/musb/musb_gadget.c +0
-13@@ -1612,19 +1612,6 @@ static void musb_pullup(struct musb *musb, int is_on)musb_writeb (musb->mregs,MUSB_POWER , power); } -#if 0 -static int musb_gadget_vbus_session (struct usb_gadget *gadget,int is_active) -{ -musb_dbg (musb,"<= %s =>\n" , __func__); - -/* -* FIXME iff driver's softconnect flag is set (as it is during probe, -* though that can clear it), just musb_pullup(). -*/ - -return -EINVAL ; -} -#endif static int musb_gadget_vbus_draw (struct usb_gadget *gadget,unsigned mA) {Signature · 1 line
2.40.1
Hi,
This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him a patch that has triggered this response. He used to manually respond to these common problems, but in order to save his sanity (he kept writing the same thing over and over, yet to different people), I was created. Hopefully you will not take offence and will fix the problem in your patch and resubmit it so that it can be accepted into the Linux kernel tree.
You are receiving this message because of the following common error(s) as indicated below:
- This looks like a new version of a previously submitted patch, but you did not list below the --- line any changes from the previous version. Please read the section entitled "The canonical patch format" in the kernel file, Documentation/process/submitting-patches.rst for what needs to be done here to properly describe this.
If you wish to discuss this problem further, or you have questions about how to resolve this issue, please feel free to respond to this email and Greg will reply once he has dug out from the pending patches received from other developers.
thanks,
greg k-h's patch email bot