mlx5 supports InfiniBand BTH item match
cover mlx5 supports InfiniBand BTH item match
mlx5 supports InfiniBand BTH item match by SWS and HWS.
depends-on: http://patches.dpdk.org/project/dpdk/patch/[email protected]/ ("ethdev: add flow item for RoCE infiniband BTH")
Dong Zhou (2):
net/mlx5: add support for infiniband BTH match net/mlx5/hws: add support for infiniband BTH match
drivers/common/mlx5/mlx5_prm.h | 5 +- drivers/net/mlx5/hws/mlx5dr_definer.c | 76 ++++++++++++++++++- drivers/net/mlx5/hws/mlx5dr_definer.h | 2 + drivers/net/mlx5/mlx5_flow.h | 6 ++ drivers/net/mlx5/mlx5_flow_dv.c | 102 ++++++++++++++++++++++++++ drivers/net/mlx5/mlx5_flow_hw.c | 1 + 6 files changed, 189 insertions(+), 3 deletions(-)
Signature · 1 line
2.27.0
PATCH 1/2 net/mlx5: add support for infiniband BTH match
This patch adds support to match opcode and dst_qp fields in infiniband BTH. Currently, only the RoCEv2 packet is supported, the input BTH match item is defaulted to match one RoCEv2 packet.
--- drivers/common/mlx5/mlx5_prm.h | 5 +- drivers/net/mlx5/mlx5_flow.h | 6 ++ drivers/net/mlx5/mlx5_flow_dv.c | 102 ++++++++++++++++++++++++++++++++ 3 files changed, 111 insertions(+), 2 deletions(-)
drivers/common/mlx5/mlx5_prm.h +3 -2
@@ -932,7 +932,7 @@ struct mlx5_ifc_fte_match_set_misc_bits {u8 gre_key_h[0x18 ];u8 gre_key_l[0x8 ];u8 vxlan_vni[0x18 ]; -u8 reserved_at_b8[0x8 ]; +u8 bth_opcode[0x8 ];u8 geneve_vni[0x18 ];u8 lag_rx_port_affinity[0x4 ];u8 reserved_at_e8[0x2 ];
@@ -945,7 +945,8 @@ struct mlx5_ifc_fte_match_set_misc_bits {u8 reserved_at_120[0xa ];u8 geneve_opt_len[0x6 ];u8 geneve_protocol_type[0x10 ]; -u8 reserved_at_140[0x20 ]; +u8 reserved_at_140[0x8 ]; +u8 bth_dst_qp[0x18 ];u8 inner_esp_spi[0x20 ];u8 outer_esp_spi[0x20 ];u8 reserved_at_1a0[0x60 ];
drivers/net/mlx5/mlx5_flow.h +6 -0
@@ -227,6 +227,9 @@ enum mlx5_feature_name {/* Aggregated affinity item */ #define MLX5_FLOW_ITEM_AGGR_AFFINITY (UINT64_C(1) << 49) +/* IB BTH ITEM. */ +#define MLX5_FLOW_ITEM_IB_BTH (1ull << 51) +/* Outer Masks. */ #define MLX5_FLOW_LAYER_OUTER_L3 \ (MLX5_FLOW_LAYER_OUTER_L3_IPV4 | MLX5_FLOW_LAYER_OUTER_L3_IPV6)
@@ -364,6 +367,9 @@ enum mlx5_feature_name {#define MLX5_UDP_PORT_VXLAN 4789#define MLX5_UDP_PORT_VXLAN_GPE 4790 +/* UDP port numbers for RoCEv2. */ +#define MLX5_UDP_PORT_ROCEv2 4791 +/* UDP port numbers for GENEVE. */ #define MLX5_UDP_PORT_GENEVE 6081
drivers/net/mlx5/mlx5_flow_dv.c +102 -0
126 lines not on this page · raw message
Signature · 1 line
2.27.0
PATCH 2/2 net/mlx5/hws: add support for infiniband BTH match
In reply to Dong ZhouThis patch adds support to match opcode and dst_qp fields in infiniband BTH. Currently, only the RoCEv2 packet is supported, the input BTH match item is defaulted to match one RoCEv2 packet.
--- drivers/net/mlx5/hws/mlx5dr_definer.c | 76 ++++++++++++++++++++++++++- drivers/net/mlx5/hws/mlx5dr_definer.h | 2 + drivers/net/mlx5/mlx5_flow_hw.c | 1 + 3 files changed, 78 insertions(+), 1 deletion(-)
drivers/net/mlx5/hws/mlx5dr_definer.c +75 -1
@@ -10,6 +10,7 @@#define ETH_TYPE_IPV6_VXLAN 0x86DD#define ETH_VXLAN_DEFAULT_PORT 4789#define IP_UDP_PORT_MPLS 6635 +#define UDP_ROCEV2_PORT 4791#define DR_FLOW_LAYER_TUNNEL_NO_MPLS (MLX5_FLOW_LAYER_TUNNEL & ~MLX5_FLOW_LAYER_MPLS)#define STE_NO_VLAN 0x0
@@ -171,7 +172,9 @@ struct mlx5dr_definer_conv_data { X(SET_BE16, gre_opt_checksum, v->checksum_rsvd.checksum, rte_flow_item_gre_opt) \ X(SET, meter_color, rte_col_2_mlx5_col(v->color), rte_flow_item_meter_color) \ X(SET_BE32, ipsec_spi, v->hdr.spi, rte_flow_item_esp) \ -X (SET_BE32 , ipsec_sequence_number, v->hdr.seq, rte_flow_item_esp) + X(SET_BE32, ipsec_sequence_number, v->hdr.seq, rte_flow_item_esp) \ + X(SET, ib_l4_udp_port, UDP_ROCEV2_PORT, rte_flow_item_ib_bth) \ +X (SET , ib_l4_opcode, v->hdr.opcode, rte_flow_item_ib_bth) /* Item set function format */#define X (set_type, func_name, value, item_type) \
@@ -583,6 +586,16 @@ mlx5dr_definer_mpls_label_set(struct mlx5dr_definer_fc *fc,memcpy (tag + fc->byte_off +sizeof (v->label_tc_s), &v->ttl,sizeof (v->ttl)); } +static void +mlx5dr_definer_ib_l4_qp_set (struct mlx5dr_definer_fc *fc, +const void *item_spec, +uint8_t *tag) +{ +const struct rte_flow_item_ib_bth *v = item_spec; + +memcpy (tag + fc->byte_off, &v->hdr.dst_qp,sizeof (v->hdr.dst_qp)); +} + static int mlx5dr_definer_conv_item_eth(struct mlx5dr_definer_conv_data *cd, struct rte_flow_item *item,
@@ -2041,6 +2054,63 @@ mlx5dr_definer_conv_item_flex_parser(struct mlx5dr_definer_conv_data *cd,return 0 ; } +static int +mlx5dr_definer_conv_item_ib_l4 (struct mlx5dr_definer_conv_data *cd, +struct rte_flow_item *item, +int item_idx) +{ +const struct rte_flow_item_ib_bth *m = item->mask; +struct mlx5dr_definer_fc *fc; +bool inner = cd->tunnel; + +/* In order to match on RoCEv2(layer4 ib), we must match +* on ip_protocol and l4_dport. +*/ +if (!cd->relaxed) { + fc = &cd->fc[DR_CALC_FNAME (IP_PROTOCOL , inner)]; +if (!fc->tag_set) { + fc->item_idx = item_idx; + fc->tag_mask_set = &mlx5dr_definer_ones_set; + fc->tag_set = &mlx5dr_definer_udp_protocol_set; +DR_CALC_SET (fc, eth_l2, l4_type_bwc, inner); + } + + fc = &cd->fc[DR_CALC_FNAME (L4_DPORT , inner)]; +if (!fc->tag_set) { + fc->item_idx = item_idx; + fc->tag_mask_set = &mlx5dr_definer_ones_set; + fc->tag_set = &mlx5dr_definer_ib_l4_udp_port_set; +DR_CALC_SET (fc, eth_l4, destination_port, inner); + } + } + +if (!m) +return 0 ; + +if (m->hdr.se || m->hdr.m || m->hdr.padcnt || m->hdr.tver || + m->hdr.pkey || m->hdr.f || m->hdr.b || m->hdr.rsvd0 || + m->hdr.a || m->hdr.rsvd1 || !is_mem_zero (m->hdr.psn,3 )) { + rte_errno =ENOTSUP ; +return rte_errno; + } + +if (m->hdr.opcode) { + fc = &cd->fc[MLX5DR_DEFINER_FNAME_IB_L4_OPCODE ]; + fc->item_idx = item_idx; + fc->tag_set = &mlx5dr_definer_ib_l4_opcode_set; +DR_CALC_SET_HDR (fc, ib_l4, opcode); + } + +if (!is_mem_zero (m->hdr.dst_qp,3 )) { + fc = &cd->fc[MLX5DR_DEFINER_FNAME_IB_L4_QPN ]; + fc->item_idx = item_idx; + fc->tag_set = &mlx5dr_definer_ib_l4_qp_set; +DR_CALC_SET_HDR (fc, ib_l4, qp); + } + +return 0 ; +} + static int mlx5dr_definer_conv_items_to_hl(struct mlx5dr_context *ctx, struct mlx5dr_match_template *mt,
@@ -2182,6 +2252,10 @@ mlx5dr_definer_conv_items_to_hl(struct mlx5dr_context *ctx, item_flags |=MLX5_FLOW_LAYER_MPLS ; cd.mpls_idx++;break ; +case RTE_FLOW_ITEM_TYPE_IB_BTH : + ret =mlx5dr_definer_conv_item_ib_l4 (&cd, items, i); + item_flags |=MLX5_FLOW_ITEM_IB_BTH ; +break ;default :DR_LOG (ERR ,"Unsupported item type %d" , items->type); rte_errno =ENOTSUP ;
drivers/net/mlx5/hws/mlx5dr_definer.h +2 -0
@@ -134,6 +134,8 @@ enum mlx5dr_definer_fname {MLX5DR_DEFINER_FNAME_OKS2_MPLS2_I ,MLX5DR_DEFINER_FNAME_OKS2_MPLS3_I ,MLX5DR_DEFINER_FNAME_OKS2_MPLS4_I , +MLX5DR_DEFINER_FNAME_IB_L4_OPCODE , +MLX5DR_DEFINER_FNAME_IB_L4_QPN , MLX5DR_DEFINER_FNAME_MAX, };
drivers/net/mlx5/mlx5_flow_hw.c +1 -0
@@ -4969,6 +4969,7 @@ flow_hw_pattern_validate(struct rte_eth_dev *dev,case RTE_FLOW_ITEM_TYPE_IPV6_ROUTING_EXT :case RTE_FLOW_ITEM_TYPE_ESP :case RTE_FLOW_ITEM_TYPE_FLEX : +case RTE_FLOW_ITEM_TYPE_IB_BTH :break ;case RTE_FLOW_ITEM_TYPE_INTEGRITY :/*
Signature · 1 line
2.27.0
cover mlx5 supports InfiniBand BTH item match
In reply to Dong Zhoumlx5 supports InfiniBand BTH item match by SWS and HWS.
depends-on: http://patches.dpdk.org/project/dpdk/patch/[email protected]/ ("ethdev: add flow item for RoCE infiniband BTH")
v1:
- Update mlx5.ini and mlx5.rst doc in the first patch.
Dong Zhou (2):
net/mlx5: add support for infiniband BTH match net/mlx5/hws: add support for infiniband BTH match
doc/guides/nics/features/mlx5.ini | 1 + doc/guides/nics/mlx5.rst | 1 + drivers/common/mlx5/mlx5_prm.h | 5 +- drivers/net/mlx5/hws/mlx5dr_definer.c | 76 ++++++++++++++++++- drivers/net/mlx5/hws/mlx5dr_definer.h | 2 + drivers/net/mlx5/mlx5_flow.h | 6 ++ drivers/net/mlx5/mlx5_flow_dv.c | 102 ++++++++++++++++++++++++++ drivers/net/mlx5/mlx5_flow_hw.c | 1 + 8 files changed, 191 insertions(+), 3 deletions(-)
Signature · 1 line
2.27.0
PATCH 1/2 net/mlx5: add support for infiniband BTH match
This patch adds support to match opcode and dst_qp fields in infiniband BTH. Currently, only the RoCEv2 packet is supported, the input BTH match item is defaulted to match one RoCEv2 packet.
--- doc/guides/nics/features/mlx5.ini | 1 + doc/guides/nics/mlx5.rst | 1 + drivers/common/mlx5/mlx5_prm.h | 5 +- drivers/net/mlx5/mlx5_flow.h | 6 ++ drivers/net/mlx5/mlx5_flow_dv.c | 102 ++++++++++++++++++++++++++++++ 5 files changed, 113 insertions(+), 2 deletions(-)
doc/guides/nics/features/mlx5.ini +1 -0
@@ -68,6 +68,7 @@ gre_key = Y gre_option = Y gtp = Y gtp_psc = Y +ib_bth = Y icmp = Y icmp6 = Y icmp6_echo_request = Y
doc/guides/nics/mlx5.rst +1 -0
@@ -162,6 +162,7 @@ Features - Sub-Function. - Matching on represented port. - Matching on aggregated affinity. +- Matching on IB BTH. Limitations
drivers/common/mlx5/mlx5_prm.h +3 -2
@@ -932,7 +932,7 @@ struct mlx5_ifc_fte_match_set_misc_bits {u8 gre_key_h[0x18 ];u8 gre_key_l[0x8 ];u8 vxlan_vni[0x18 ]; -u8 reserved_at_b8[0x8 ]; +u8 bth_opcode[0x8 ];u8 geneve_vni[0x18 ];u8 lag_rx_port_affinity[0x4 ];u8 reserved_at_e8[0x2 ];
@@ -945,7 +945,8 @@ struct mlx5_ifc_fte_match_set_misc_bits {u8 reserved_at_120[0xa ];u8 geneve_opt_len[0x6 ];u8 geneve_protocol_type[0x10 ]; -u8 reserved_at_140[0x20 ]; +u8 reserved_at_140[0x8 ]; +u8 bth_dst_qp[0x18 ];u8 inner_esp_spi[0x20 ];u8 outer_esp_spi[0x20 ];u8 reserved_at_1a0[0x60 ];
drivers/net/mlx5/mlx5_flow.h +6 -0
@@ -227,6 +227,9 @@ enum mlx5_feature_name {/* Aggregated affinity item */ #define MLX5_FLOW_ITEM_AGGR_AFFINITY (UINT64_C(1) << 49) +/* IB BTH ITEM. */ +#define MLX5_FLOW_ITEM_IB_BTH (1ull << 51) +/* Outer Masks. */ #define MLX5_FLOW_LAYER_OUTER_L3 \ (MLX5_FLOW_LAYER_OUTER_L3_IPV4 | MLX5_FLOW_LAYER_OUTER_L3_IPV6)
@@ -364,6 +367,9 @@ enum mlx5_feature_name {#define MLX5_UDP_PORT_VXLAN 4789#define MLX5_UDP_PORT_VXLAN_GPE 4790 +/* UDP port numbers for RoCEv2. */ +#define MLX5_UDP_PORT_ROCEv2 4791 +/* UDP port numbers for GENEVE. */ #define MLX5_UDP_PORT_GENEVE 6081
drivers/net/mlx5/mlx5_flow_dv.c +102 -0
126 lines not on this page · raw message
Signature · 1 line
2.27.0
PATCH 2/2 net/mlx5/hws: add support for infiniband BTH match
In reply to Dong ZhouThis patch adds support to match opcode and dst_qp fields in infiniband BTH. Currently, only the RoCEv2 packet is supported, the input BTH match item is defaulted to match one RoCEv2 packet.
--- drivers/net/mlx5/hws/mlx5dr_definer.c | 76 ++++++++++++++++++++++++++- drivers/net/mlx5/hws/mlx5dr_definer.h | 2 + drivers/net/mlx5/mlx5_flow_hw.c | 1 + 3 files changed, 78 insertions(+), 1 deletion(-)
drivers/net/mlx5/hws/mlx5dr_definer.c +75 -1
@@ -10,6 +10,7 @@#define ETH_TYPE_IPV6_VXLAN 0x86DD#define ETH_VXLAN_DEFAULT_PORT 4789#define IP_UDP_PORT_MPLS 6635 +#define UDP_ROCEV2_PORT 4791#define DR_FLOW_LAYER_TUNNEL_NO_MPLS (MLX5_FLOW_LAYER_TUNNEL & ~MLX5_FLOW_LAYER_MPLS)#define STE_NO_VLAN 0x0
@@ -171,7 +172,9 @@ struct mlx5dr_definer_conv_data { X(SET_BE16, gre_opt_checksum, v->checksum_rsvd.checksum, rte_flow_item_gre_opt) \ X(SET, meter_color, rte_col_2_mlx5_col(v->color), rte_flow_item_meter_color) \ X(SET_BE32, ipsec_spi, v->hdr.spi, rte_flow_item_esp) \ -X (SET_BE32 , ipsec_sequence_number, v->hdr.seq, rte_flow_item_esp) + X(SET_BE32, ipsec_sequence_number, v->hdr.seq, rte_flow_item_esp) \ + X(SET, ib_l4_udp_port, UDP_ROCEV2_PORT, rte_flow_item_ib_bth) \ +X (SET , ib_l4_opcode, v->hdr.opcode, rte_flow_item_ib_bth) /* Item set function format */#define X (set_type, func_name, value, item_type) \
@@ -583,6 +586,16 @@ mlx5dr_definer_mpls_label_set(struct mlx5dr_definer_fc *fc,memcpy (tag + fc->byte_off +sizeof (v->label_tc_s), &v->ttl,sizeof (v->ttl)); } +static void +mlx5dr_definer_ib_l4_qp_set (struct mlx5dr_definer_fc *fc, +const void *item_spec, +uint8_t *tag) +{ +const struct rte_flow_item_ib_bth *v = item_spec; + +memcpy (tag + fc->byte_off, &v->hdr.dst_qp,sizeof (v->hdr.dst_qp)); +} + static int mlx5dr_definer_conv_item_eth(struct mlx5dr_definer_conv_data *cd, struct rte_flow_item *item,
@@ -2041,6 +2054,63 @@ mlx5dr_definer_conv_item_flex_parser(struct mlx5dr_definer_conv_data *cd,return 0 ; } +static int +mlx5dr_definer_conv_item_ib_l4 (struct mlx5dr_definer_conv_data *cd, +struct rte_flow_item *item, +int item_idx) +{ +const struct rte_flow_item_ib_bth *m = item->mask; +struct mlx5dr_definer_fc *fc; +bool inner = cd->tunnel; + +/* In order to match on RoCEv2(layer4 ib), we must match +* on ip_protocol and l4_dport. +*/ +if (!cd->relaxed) { + fc = &cd->fc[DR_CALC_FNAME (IP_PROTOCOL , inner)]; +if (!fc->tag_set) { + fc->item_idx = item_idx; + fc->tag_mask_set = &mlx5dr_definer_ones_set; + fc->tag_set = &mlx5dr_definer_udp_protocol_set; +DR_CALC_SET (fc, eth_l2, l4_type_bwc, inner); + } + + fc = &cd->fc[DR_CALC_FNAME (L4_DPORT , inner)]; +if (!fc->tag_set) { + fc->item_idx = item_idx; + fc->tag_mask_set = &mlx5dr_definer_ones_set; + fc->tag_set = &mlx5dr_definer_ib_l4_udp_port_set; +DR_CALC_SET (fc, eth_l4, destination_port, inner); + } + } + +if (!m) +return 0 ; + +if (m->hdr.se || m->hdr.m || m->hdr.padcnt || m->hdr.tver || + m->hdr.pkey || m->hdr.f || m->hdr.b || m->hdr.rsvd0 || + m->hdr.a || m->hdr.rsvd1 || !is_mem_zero (m->hdr.psn,3 )) { + rte_errno =ENOTSUP ; +return rte_errno; + } + +if (m->hdr.opcode) { + fc = &cd->fc[MLX5DR_DEFINER_FNAME_IB_L4_OPCODE ]; + fc->item_idx = item_idx; + fc->tag_set = &mlx5dr_definer_ib_l4_opcode_set; +DR_CALC_SET_HDR (fc, ib_l4, opcode); + } + +if (!is_mem_zero (m->hdr.dst_qp,3 )) { + fc = &cd->fc[MLX5DR_DEFINER_FNAME_IB_L4_QPN ]; + fc->item_idx = item_idx; + fc->tag_set = &mlx5dr_definer_ib_l4_qp_set; +DR_CALC_SET_HDR (fc, ib_l4, qp); + } + +return 0 ; +} + static int mlx5dr_definer_conv_items_to_hl(struct mlx5dr_context *ctx, struct mlx5dr_match_template *mt,
@@ -2182,6 +2252,10 @@ mlx5dr_definer_conv_items_to_hl(struct mlx5dr_context *ctx, item_flags |=MLX5_FLOW_LAYER_MPLS ; cd.mpls_idx++;break ; +case RTE_FLOW_ITEM_TYPE_IB_BTH : + ret =mlx5dr_definer_conv_item_ib_l4 (&cd, items, i); + item_flags |=MLX5_FLOW_ITEM_IB_BTH ; +break ;default :DR_LOG (ERR ,"Unsupported item type %d" , items->type); rte_errno =ENOTSUP ;
drivers/net/mlx5/hws/mlx5dr_definer.h +2 -0
@@ -134,6 +134,8 @@ enum mlx5dr_definer_fname {MLX5DR_DEFINER_FNAME_OKS2_MPLS2_I ,MLX5DR_DEFINER_FNAME_OKS2_MPLS3_I ,MLX5DR_DEFINER_FNAME_OKS2_MPLS4_I , +MLX5DR_DEFINER_FNAME_IB_L4_OPCODE , +MLX5DR_DEFINER_FNAME_IB_L4_QPN , MLX5DR_DEFINER_FNAME_MAX, };
drivers/net/mlx5/mlx5_flow_hw.c +1 -0
@@ -4969,6 +4969,7 @@ flow_hw_pattern_validate(struct rte_eth_dev *dev,case RTE_FLOW_ITEM_TYPE_IPV6_ROUTING_EXT :case RTE_FLOW_ITEM_TYPE_ESP :case RTE_FLOW_ITEM_TYPE_FLEX : +case RTE_FLOW_ITEM_TYPE_IB_BTH :break ;case RTE_FLOW_ITEM_TYPE_INTEGRITY :/*
Signature · 1 line
2.27.0
RE: [PATCH v1 2/2] net/mlx5/hws: add support for infiniband BTH match
Quoted 13 lines
-----Original Message-----
From: Bill Zhou <[email protected]>
Sent: Tuesday, June 6, 2023 2:07 PM
To: Ori Kam <[email protected]>; Alex Vesker <[email protected]>; Slava Ovsiienko <[email protected]>; NBU-Contact-Thomas Monjalon (EXTERNAL) <[email protected]>; Matan Azrad <[email protected]>; Suanming Mou <[email protected]>
Cc: [email protected]; Raslan Darawsheh <[email protected]>
Subject: [PATCH v1 2/2]net/mlx5/hws: add support for infiniband BTH match
Quoted 7 lines
This patch adds support to match opcode and
dst_qpfields in infiniband BTH. Currently, only the RoCEv2 packet is supported, the input BTH match item is defaulted to match one RoCEv2 packet.Signed-off-by Dong Zhou <[email protected]>Acked-by Alex Vesker <[email protected]>---
Hi,
Quoted 31 lines
-----Original Message-----
From: Bill Zhou <[email protected]>
Sent: Tuesday, June 6, 2023 2:07 PM
To: Ori Kam <[email protected]>; Alex Vesker <[email protected]>; Slava Ovsiienko <[email protected]>; NBU-Contact-Thomas Monjalon (EXTERNAL) <[email protected]>
Cc: [email protected]; Raslan Darawsheh <[email protected]>
Subject: [PATCH v1 0/2] mlx5 supports InfiniBand BTH item matchmlx5 supports InfiniBand BTH item match by SWS and HWS. depends-on:
http://patches.dpdk.org/project/dpdk/patch/20230531032653.3037946-
[email protected]/ ("ethdev: add flow item for RoCE infiniband BTH")v1:
- Update mlx5.ini andmlx5.rstdoc in the first patch.Dong Zhou (2):
net/mlx5: add support for infiniband BTH matchnet/mlx5/hws: add support for infiniband BTH matchdoc/guides/nics/features/mlx5.ini | 1 + doc/guides/nics/mlx5.rst | 1 + drivers/common/mlx5/mlx5_prm.h | 5 +- drivers/net/mlx5/hws/mlx5dr_definer.c | 76 ++++++++++++++++++- drivers/net/mlx5/hws/mlx5dr_definer.h | 2 + drivers/net/mlx5/mlx5_flow.h | 6 ++ drivers/net/mlx5/mlx5_flow_dv.c | 102 ++++++++++++++++++++++++++ drivers/net/mlx5/mlx5_flow_hw.c | 1 + 8 files changed, 191 insertions(+), 3 deletions(-)
Quoted 2 lines
--
2.27.0
Series applied to next-net-mlx,
Kindest regards,
Raslan Darawsheh