dt-bindings: arm: Add Gateworks i.MX8M Mini GW7905-0x board
Subsystems (2)
PATCH 1/2 dt-bindings: arm: Add Gateworks i.MX8M Mini GW7905-0x board
Add DT compatible string for a Gateworks GW7905-0x board based on the i.MX8M Mini from NXP.
--- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/fsl.yaml +1 -0
@@ -915,6 +915,7 @@ properties: - gw,imx8mm-gw7901 # i.MX8MM Gateworks Board - gw,imx8mm-gw7902 # i.MX8MM Gateworks Board - gw,imx8mm-gw7903 # i.MX8MM Gateworks Board + - gateworks,imx8mm-gw7905-0x # i.MX8MM Gateworks Board - innocomm,wb15-evk # i.MX8MM Innocomm EVK board with WB15 SoM - kontron,imx8mm-sl # i.MX8MM Kontron SL (N801X) SOM - kontron,imx8mm-osm-s # i.MX8MM Kontron OSM-S (N802X) SOM
Signature · 1 line
2.25.1
PATCH 2/2 arm64: dts: freescale: Add imx8mm-venice-gw7905-0x
The Gateworks imx8mm-venice-gw7905-0x consists of a SOM + baseboard.
The GW700x SOM contains the following:
- i.MX8M Mini SoC
- LPDDR4 memory
- eMMC Boot device
- Gateworks System Controller (GSC) with integrated EEPROM, button controller, and ADC's
- PMIC
- SOM connector providing:
- FEC GbE MII
- 1x SPI
- 2x I2C
- 4x UART
- 2x USB 2.0
- 1x PCI
- 1x SDIO (4-bit 3.3V)
- 1x SDIO (4-bit 3.3V/1.8V)
- GPIO
The GW7905 Baseboard contains the following:
- GPS
- microSD
- off-board I/O connector with I2C, SPI, GPIO
- EERPOM
- PCIe clock generator
- 1x full-length miniPCIe socket with PCI/USB3 (via mux) and USB2.0
- 1x half-length miniPCIe socket with USB2.0 and USB3.0
- USB 3.0 HUB
- USB Type-C with USB PD Sink capability and peripheral support
- USB Type-C with USB 3.0 host support
--- arch/arm64/boot/dts/freescale/Makefile | 1 + .../dts/freescale/imx8mm-venice-gw7905-0x.dts | 28 ++ .../dts/freescale/imx8mm-venice-gw7905.dtsi | 303 ++++++++++++++++++ 3 files changed, 332 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905-0x.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905.dtsi
arch/arm64/boot/dts/freescale/Makefile +1 -0
@@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7903.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7904.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7905-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-yavia.dtb
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905-0x.dts new file +28 -0
@@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2023 Gateworks Corporation + */ + +/dts-v1/; + +#include "imx8mm.dtsi" +#include "imx8mm-venice-gw700x.dtsi" +#include "imx8mm-venice-gw7905.dtsi" + +/ { + model = "Gateworks Venice GW7905-0x i.MX8MM Development Kit"; + compatible = "gateworks,imx8mm-gw7905-0x", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; +}; + +/* Disable SOM interfaces not used on baseboard */ +&fec1 { + status = "disabled"; +}; + +&usdhc1 { + status = "disabled"; +};
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905.dtsi new file +303 -0
303 lines not on this page · raw message
Signature · 1 line
2.25.1
Quoted 13 lines · Tim Harvey
Add DT compatible string for a Gateworks GW7905-0x board based on the i.MX8M Mini from NXP.
Signed-off-by Tim Harvey <[email protected]>--- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/arm/fsl.yaml +0
-0
Documentation/devicetree/bindings/arm/fsl.yaml properties: · line 918
Quoted 4 lines
Documentation/devicetree/bindings/arm/fsl.yaml +1
-0@@ -915,6 +915,7 @@ properties: - gw,imx8mm-gw7901 # i.MX8MM Gateworks Board - gw,imx8mm-gw7902 # i.MX8MM Gateworks Board - gw,imx8mm-gw7903 # i.MX8MM Gateworks Board + - gateworks,imx8mm-gw7905-0x # i.MX8MM Gateworks Board
Are you sure you are using correct prefix? Anyway, keep alphabetical order, so before "gw".
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 9 lines · Krzysztof Kozlowski
Quoted 8 lines · Tim Harvey
Add DT compatible string for a Gateworks GW7905-0x board based on the i.MX8M Mini from NXP.
Signed-off-by Tim Harvey <[email protected]>--- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+)
Quoted 12 lines
Documentation/devicetree/bindings/arm/fsl.yaml properties: · line 918
Quoted 9 lines
Documentation/devicetree/bindings/arm/fsl.yaml +1
-0@@ -915,6 +915,7 @@ properties: - gw,imx8mm-gw7901 # i.MX8MM Gateworks Board - gw,imx8mm-gw7902 # i.MX8MM Gateworks Board - gw,imx8mm-gw7903 # i.MX8MM Gateworks Board + - gateworks,imx8mm-gw7905-0x # i.MX8MM Gateworks BoardAre you sure you are using correct prefix? Anyway, keep alphabetical order, so before "gw".
"^gw,.*":
description: Gateworks Corporation
use "gateworks" vendor prefix
deprecated: true
;)
I'd be more interested in whether that -0x is a wildcard!
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 24 lines · Conor Dooley
Quoted 9 lines · Krzysztof Kozlowski
Quoted 8 lines · Tim Harvey
Add DT compatible string for a Gateworks GW7905-0x board based on the i.MX8M Mini from NXP.
Signed-off-by Tim Harvey <[email protected]>--- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+)Quoted 12 lines
Documentation/devicetree/bindings/arm/fsl.yaml properties: · line 918
Quoted 9 lines
Documentation/devicetree/bindings/arm/fsl.yaml +1
-0@@ -915,6 +915,7 @@ properties: - gw,imx8mm-gw7901 # i.MX8MM Gateworks Board - gw,imx8mm-gw7902 # i.MX8MM Gateworks Board - gw,imx8mm-gw7903 # i.MX8MM Gateworks Board + - gateworks,imx8mm-gw7905-0x # i.MX8MM Gateworks BoardAre you sure you are using correct prefix? Anyway, keep alphabetical order, so before "gw".
Quoted 8 lines
"^gw,.*":
description: Gateworks Corporation
use "gateworks" vendor prefix
deprecated: true;)
I'd be more interested in whether that -0x is a wildcard!
The 0x has to do with our part numbering scheme. The gw7905 is the baseboard and the 0x is the SOM and we have SOM's with part loading options that do not affect device-tree as reserved for 00 to 09.
I'll fix the sorting for v2.
Thanks,
Tim