sunxi: H616: improve DRAM setup and add LPDDR3 support
Subsystems (3)
cover sunxi: H616: improve DRAM setup and add LPDDR3 support
Hi,
this series picks up on Mikhail's H616 LPDDR3 DRAM support (many thanks again for sending that!), and prepends some patches that help to keep the code size down.
This was triggered by Mikhail's patches creating bigger binaries, even though the DRAM type is known at compile time, and the compiler should optimise out the unused code parts.
Looking at the disassembly I found some issues that this series fixes:
- One function was not declared static, so was issued separately in the object file (patch 1/5).
- Many functions do not change the values in the struct that gets passed in, so we should mark this pointer as "const", to help the compiler with the "constant propagation" optimisation (patch 2/5).
- This alone does not really help, as this structure contains both variable and fixed fields. Patch 3/5 splits that up, so we can define one struct as "static const", which finally convinces the compiler to fold the compile-time constants into the code, and removes the code for the unused DRAM variant, along with other code parts. Even without the LPDDR3 support this reduces the code size by about 2KB(!), and allows the LPDDR3 patches to come for free, code-size wise.
- The final two patches are Mikhail's patches, slightly massaged: white space issue, keeping the static const phy_init[] array, rebased on top of the "const" work above. I haven't reviewed the patch in anger, though.
Please have a look and test.
Cheers,
Andre
Andre Przywara (3):
sunxi: dram: make MBUS configuration functions static
sunxi: H616: dram: const-ify DRAM function parameters
sunxi: H616: dram: split struct dram_para
iuncuim (2):
sunxi: H616: add DRAM type selection
sunxi: H616: add LPDDR3 DRAM support
.../include/asm/arch-sunxi/dram_sun50i_h616.h | 12 +- arch/arm/mach-sunxi/Kconfig | 18 +- arch/arm/mach-sunxi/dram_sun50i_h6.c | 3 +- arch/arm/mach-sunxi/dram_sun50i_h616.c | 383 +++++++++++------- arch/arm/mach-sunxi/dram_sunxi_dw.c | 18 +- arch/arm/mach-sunxi/dram_timings/Makefile | 4 +- .../mach-sunxi/dram_timings/h616_ddr3_1333.c | 2 +- .../arm/mach-sunxi/dram_timings/h616_lpddr3.c | 95 +++++ configs/orangepi_zero2_defconfig | 1 + configs/x96_mate_defconfig | 1 + 10 files changed, 372 insertions(+), 165 deletions(-) create mode 100644 arch/arm/mach-sunxi/dram_timings/h616_lpddr3.c
Signature · 1 line
2.35.8
PATCH 1/5 sunxi: dram: make MBUS configuration functions static
The usage of the C keyword "inline" seems to be a common
misunderstanding: it's a *hint* only, and modern compilers will inline (or not) functions based on their own judgement and provided compiler options.
So while marking functions as "inline" does not do much, missing the "static" keyword will force to compiler to spell out a version of the function for potential external callers, which actually increases the code size (though hopefully the linker will drop the function).
Change the "inline" attribute for the mbus_configure_port() functions in some Allwinner DRAM drivers to "static", so that the explicit version can actually be dropped from the object file, reducing the code size.
"static inline" has a use case in header files, where it avoids a warning if a .c file including this header does not use the particular function. In a .c file itself "static inline" is not useful otherwise, so just use static here as well.
--- arch/arm/mach-sunxi/dram_sun50i_h6.c | 3 ++- arch/arm/mach-sunxi/dram_sun50i_h616.c | 2 +- arch/arm/mach-sunxi/dram_sunxi_dw.c | 18 +++++++++--------- 3 files changed, 12 insertions(+), 11 deletions(-)
arch/arm/mach-sunxi/dram_sun50i_h6.c +2 -1
@@ -93,7 +93,8 @@ enum {MBUS_QOS_HIGH ,MBUS_QOS_HIGHEST }; -inline void mbus_configure_port(u8 port, + +static void mbus_configure_port(u8 port, bool bwlimit, bool priority, u8 qos,
arch/arm/mach-sunxi/dram_sun50i_h616.c +1 -1
@@ -31,7 +31,7 @@ enum {MBUS_QOS_HIGHEST }; -inline void mbus_configure_port(u8 port, +static void mbus_configure_port(u8 port, bool bwlimit, bool priority, u8 qos,
arch/arm/mach-sunxi/dram_sunxi_dw.c +9 -9
@@ -81,15 +81,15 @@ enum { MBUS_QOS_HIGHEST }; -static inline void mbus_configure_port (u8 port, -bool bwlimit, -bool priority, -u8 qos,/* MBUS_QOS_LOWEST .. MBUS_QOS_HIGEST */ -u8 waittime,/* 0 .. 0xf */ -u8 acs,/* 0 .. 0xff */ -u16 bwl0,/* 0 .. 0xffff, bandwidth limit in MB/s */ -u16 bwl1, -u16 bwl2) +static void mbus_configure_port (u8 port, +bool bwlimit, +bool priority, +u8 qos,/* MBUS_QOS_LOWEST .. MBUS_QOS_HIGEST */ +u8 waittime,/* 0 .. 0xf */ +u8 acs,/* 0 .. 0xff */ +u16 bwl0,/* 0 .. 0xffff, bandwidth limit in MB/s */ +u16 bwl1, +u16 bwl2) {struct sunxi_mctl_com_reg *const mctl_com = (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE ;
Signature · 1 line
2.35.8
Re: [PATCH 1/5] sunxi: dram: make MBUS configuration functions static
Dne sreda, 07. junij 2023 ob 02:07:41 CEST je Andre Przywara napisal(a):
Quoted 13 lines
The usage of the C keyword "inline" seems to be a common
misunderstanding: it's a *hint* only, and modern compilers will inline (or not) functions based on their own judgement and provided compiler options.
So while marking functions as "inline" does not do much, missing the "static" keyword will force to compiler to spell out a version of the function for potential external callers, which actually increases the code size (though hopefully the linker will drop the function).Change the "inline" attribute for the
mbus_configure_port()functions in some Allwinner DRAM drivers to "static", so that the explicit version can actually be dropped from the object file, reducing the code size.
Quoted 6 lines
"static inline" has a use case in header files, where it avoids a warning if a .c file including this header does not use the particular function. In a .c file itself "static inline" is not useful otherwise, so just use static here as well.
Signed-off-by Andre Przywara <[email protected]>
Nice catch! Could it be put into common functions? These functions look the same. Anyway:
Best regards,
Jernej
Quoted 63 lines
--- arch/arm/mach-sunxi/dram_sun50i_h6.c | 3 ++- arch/arm/mach-sunxi/dram_sun50i_h616.c | 2 +- arch/arm/mach-sunxi/dram_sunxi_dw.c | 18 +++++++++--------- 3 files changed, 12 insertions(+), 11 deletions(-)arch/arm/mach-sunxi/dram_sun50i_h6.c +2
-1@@ -93,7 +93,8 @@ enum {MBUS_QOS_HIGH ,MBUS_QOS_HIGHEST }; -inline void mbus_configure_port(u8 port, + +static void mbus_configure_port(u8 port, bool bwlimit, bool priority, u8 qos,arch/arm/mach-sunxi/dram_sun50i_h616.c +1
-1@@ -31,7 +31,7 @@ enum {MBUS_QOS_HIGHEST }; -inline void mbus_configure_port(u8 port, +static void mbus_configure_port(u8 port, bool bwlimit, bool priority, u8 qos,arch/arm/mach-sunxi/dram_sunxi_dw.c +9
-9@@ -81,15 +81,15 @@ enum { MBUS_QOS_HIGHEST }; -static inline void mbus_configure_port (u8 port, -bool bwlimit, -bool priority, -u8 qos,/* MBUS_QOS_LOWEST .. MBUS_QOS_HIGEST */ -u8 waittime,/* 0 .. 0xf */ -u8 acs,/* 0 .. 0xff */ -u16 bwl0,/* 0 .. 0xffff, bandwidth limit in MB/s */ -u16 bwl1, -u16 bwl2) +static void mbus_configure_port (u8 port, +bool bwlimit, +bool priority, +u8 qos,/* MBUS_QOS_LOWEST .. MBUS_QOS_HIGEST */ +u8 waittime,/* 0 .. 0xf */ +u8 acs,/* 0 .. 0xff */ +u16 bwl0,/* 0 .. 0xffff, bandwidth limit in MB/s */ +u16 bwl1, +u16 bwl2) {struct sunxi_mctl_com_reg *const mctl_com = (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE ;
PATCH 2/5 sunxi: H616: dram: const-ify DRAM function parameters
In reply to Andre PrzywaraThere are quite some functions in the Allwinner H616 DRAM "driver", some of them actually change the parameters in the structure passed to them, but many are actually not.
To increase the optimisation potential for the code, mark those functions that just read members of the passed dram_para struct as "const". This in itself does not decrease the code size, but lays the groundwork for future changes doing so.
--- .../include/asm/arch-sunxi/dram_sun50i_h616.h | 2 +- arch/arm/mach-sunxi/dram_sun50i_h616.c | 30 +++++++++---------- .../mach-sunxi/dram_timings/h616_ddr3_1333.c | 2 +- 3 files changed, 17 insertions(+), 17 deletions(-)
arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h +1 -1
@@ -171,6 +171,6 @@ static inline int ns_to_t(int nanoseconds) return DIV_ROUND_UP(ctrl_freq * nanoseconds, 1000); } -void mctl_set_timing_params (struct dram_para *para); +void mctl_set_timing_params (const struct dram_para *para);#endif /* _SUNXI_DRAM_SUN50I_H616_H */
arch/arm/mach-sunxi/dram_sun50i_h616.c +15 -15
@@ -92,7 +92,7 @@ static void mctl_set_master_priority(void)dmb (); } -static void mctl_sys_init (struct dram_para *para) +static void mctl_sys_init (u32 clk_rate) {struct sunxi_ccm_reg *const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE ;
@@ -114,7 +114,7 @@ static void mctl_sys_init(struct dram_para *para)/* Set PLL5 rate to doubled DRAM clock rate */ writel (CCM_PLL5_CTRL_EN |CCM_PLL5_LOCK_EN |CCM_PLL5_OUT_EN | -CCM_PLL5_CTRL_N (para->clk *2 /24 ), &ccm->pll5_cfg); +CCM_PLL5_CTRL_N (clk_rate *2 /24 ), &ccm->pll5_cfg);mctl_await_completion (&ccm->pll5_cfg,CCM_PLL5_LOCK ,CCM_PLL5_LOCK );/* Configure DRAM mod clock */
@@ -141,7 +141,7 @@ static void mctl_sys_init(struct dram_para *para)writel (0x8000 , &mctl_ctl->clken); } -static void mctl_set_addrmap (struct dram_para *para) +static void mctl_set_addrmap (const struct dram_para *para) {struct sunxi_mctl_ctl_reg *const mctl_ctl = (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE ;
@@ -234,7 +234,7 @@ static const u8 phy_init[] = { 0x09, 0x05, 0x18 }; -static void mctl_phy_configure_odt (struct dram_para *para) +static void mctl_phy_configure_odt (const struct dram_para *para) {unsigned int val;
@@ -281,7 +281,7 @@ static void mctl_phy_configure_odt(struct dram_para *para)dmb (); } -static bool mctl_phy_write_leveling (struct dram_para *para) +static bool mctl_phy_write_leveling (const struct dram_para *para) {bool result = true;u32 val;
@@ -336,7 +336,7 @@ static bool mctl_phy_write_leveling(struct dram_para *para)return result; } -static bool mctl_phy_read_calibration (struct dram_para *para) +static bool mctl_phy_read_calibration (const struct dram_para *para) {bool result = true;u32 val, tmp;
@@ -395,7 +395,7 @@ static bool mctl_phy_read_calibration(struct dram_para *para)return result; } -static bool mctl_phy_read_training (struct dram_para *para) +static bool mctl_phy_read_training (const struct dram_para *para) {u32 val1, val2, *ptr1, *ptr2;bool result = true;
@@ -484,7 +484,7 @@ static bool mctl_phy_read_training(struct dram_para *para)return result; } -static bool mctl_phy_write_training (struct dram_para *para) +static bool mctl_phy_write_training (const struct dram_para *para) {u32 val1, val2, *ptr1, *ptr2;bool result = true;
@@ -572,7 +572,7 @@ static bool mctl_phy_write_training(struct dram_para *para)return result; } -static void mctl_phy_bit_delay_compensation (struct dram_para *para) +static void mctl_phy_bit_delay_compensation (const struct dram_para *para) {u32 *ptr, val;int i;
@@ -773,7 +773,7 @@ static void mctl_phy_bit_delay_compensation(struct dram_para *para) } } -static void mctl_phy_ca_bit_delay_compensation (struct dram_para *para) +static void mctl_phy_ca_bit_delay_compensation (const struct dram_para *para) {u32 val, *ptr;int i;
@@ -822,7 +822,7 @@ static void mctl_phy_ca_bit_delay_compensation(struct dram_para *para) } } -static bool mctl_phy_init (struct dram_para *para) +static bool mctl_phy_init (const struct dram_para *para) {struct sunxi_mctl_com_reg *const mctl_com = (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE ;
@@ -991,7 +991,7 @@ static bool mctl_phy_init(struct dram_para *para)return true; } -static bool mctl_ctrl_init (struct dram_para *para) +static bool mctl_ctrl_init (const struct dram_para *para) {struct sunxi_mctl_com_reg *const mctl_com = (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE ;
@@ -1073,9 +1073,9 @@ static bool mctl_ctrl_init(struct dram_para *para)return true; } -static bool mctl_core_init (struct dram_para *para) +static bool mctl_core_init (const struct dram_para *para) { -mctl_sys_init (para); +mctl_sys_init (para->clk);return mctl_ctrl_init (para); }
@@ -1147,7 +1147,7 @@ static void mctl_auto_detect_dram_size(struct dram_para *para) } } -static unsigned long mctl_calc_size (struct dram_para *para) +static unsigned long mctl_calc_size (const struct dram_para *para) {u8 width = para->bus_full_width ?4 :2 ;
arch/arm/mach-sunxi/dram_timings/h616_ddr3_1333.c +1 -1
@@ -15,7 +15,7 @@#include <asm/arch/dram.h> #include <asm/arch/cpu.h> -void mctl_set_timing_params (struct dram_para *para) +void mctl_set_timing_params (const struct dram_para *para) {struct sunxi_mctl_ctl_reg *const mctl_ctl = (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE ;
Signature · 1 line
2.35.8
Re: [PATCH 2/5] sunxi: H616: dram: const-ify DRAM function parameters
Dne sreda, 07. junij 2023 ob 02:07:42 CEST je Andre Przywara napisal(a):
Quoted 9 lines
There are quite some functions in the Allwinner H616 DRAM "driver", some of them actually change the parameters in the structure passed to them, but many are actually not.
To increase the optimisation potential for the code, mark those functions that just read members of the passeddram_parastruct as "const". This in itself does not decrease the code size, but lays the groundwork for future changes doing so.Signed-off-by Andre Przywara <[email protected]>
Best regards,
Jernej
PATCH 3/5 sunxi: H616: dram: split struct dram_para
In reply to Andre PrzywaraCurrently there is one DRAM parameter struct for the Allwinner H616 DRAM "driver". It contains many fields that are compile time constants (set by Kconfig variables), though there are also some fields that are probed and changed over the runtime of the DRAM initialisation.
Because of this mixture, the compiler cannot properly optimise the code for size, as it does not consider constant propagation in its full potential.
Help the compiler out by splitting that structure into two: one that only contains values known at compile time, and another one where the values will actually change. The former can then be declared "const", which will let the compiler fold its values directly into the code using it.
We also add "const" tags for some new "struct dram_config" pointers, to further increase code optimisation.
To help the compiler optimise the code further, the definition of the now "const struct dram_para" has to happen at a file-global level, so move that part out of sunxi_dram_init().
That results in quite some code savings (almost 2KB), and helps to keep the code small with the LPDDR3 support added later.
--- .../include/asm/arch-sunxi/dram_sun50i_h616.h | 10 +- arch/arm/mach-sunxi/dram_sun50i_h616.c | 182 +++++++++--------- 2 files changed, 101 insertions(+), 91 deletions(-)
arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h +6 -4
@@ -148,10 +148,6 @@ check_member(sunxi_mctl_ctl_reg, unk_0x4240, 0x4240);struct dram_para {u32 clk;enum sunxi_dram_type type; -u8 cols; -u8 rows; -u8 ranks; -u8 bus_full_width;u32 dx_odt;u32 dx_dri;u32 ca_dri;
@@ -163,6 +159,12 @@ struct dram_para {u32 tpr12; }; +struct dram_config { +u8 cols; +u8 rows; +u8 ranks; +u8 bus_full_width; +};static inline int ns_to_t (int nanoseconds) {
arch/arm/mach-sunxi/dram_sun50i_h616.c +95 -87
445 lines not on this page · raw message
Signature · 1 line
2.35.8
Re: [PATCH 3/5] sunxi: H616: dram: split struct dram_para
Dne sreda, 07. junij 2023 ob 02:07:43 CEST je Andre Przywara napisal(a):
Quoted 20 lines
Currently there is one DRAM parameter struct for the Allwinner H616 DRAM "driver". It contains many fields that are compile time constants (set by
Kconfigvariables), though there are also some fields that are probed and changed over the runtime of the DRAM initialisation.Because of this mixture, the compiler cannot properly optimise the code for size, as it does not consider constant propagation in its full potential.
Help the compiler out by splitting that structure into two: one that only contains values known at compile time, and another one where the values will actually change. The former can then be declared "const", which will let the compiler fold its values directly into the code using it.
We also add "const" tags for some new "struct
dram_config" pointers, to further increase code optimisation.
To help the compiler optimise the code further, the definition of the now "const structdram_para" has to happen at a file-global level, so move that part out ofsunxi_dram_init().
Quoted 4 lines
That results in quite some code savings (almost 2KB), and helps to keep the code small with the LPDDR3 support added later.
Signed-off-by Andre Przywara <[email protected]>
Nice trick. It could be used also in other DRAM drivers.
Best regards,
Jernej
Re: [PATCH 3/5] sunxi: H616: dram: split struct dram_para
On Fri, 09 Jun 2023 22:26:21 +0200
Jernej Škrabec <[email protected]> wrote:
Hi,
Quoted 21 lines
Dne sreda, 07. junij 2023 ob 02:07:43 CEST je Andre Przywara napisal(a):
Quoted 20 lines
Currently there is one DRAM parameter struct for the Allwinner H616 DRAM "driver". It contains many fields that are compile time constants (set by
Kconfigvariables), though there are also some fields that are probed and changed over the runtime of the DRAM initialisation.Because of this mixture, the compiler cannot properly optimise the code for size, as it does not consider constant propagation in its full potential.
Help the compiler out by splitting that structure into two: one that only contains values known at compile time, and another one where the values will actually change. The former can then be declared "const", which will let the compiler fold its values directly into the code using it.
We also add "const" tags for some new "struct
dram_config" pointers, to further increase code optimisation.
To help the compiler optimise the code further, the definition of the now "const structdram_para" has to happen at a file-global level, so move that part out ofsunxi_dram_init().
Quoted 6 lines
Quoted 4 lines
That results in quite some code savings (almost 2KB), and helps to keep the code small with the LPDDR3 support added later.
Signed-off-by Andre Przywara <[email protected]>Nice trick. It could be used also in other DRAM drivers.
You bet ;-)
I have a patch for the H6 already. It doesn't save as much there (merely 500 bytes), I guess because we don't have as many build time parameters, but the H6 SPL is very big, so every byte saved there is a win. Will post this ASAP.
Quoted 1 line
Reviewed-by Jernej Skrabec <[email protected]>
Many thanks for that!
Cheers,
Andre
PATCH 4/5 sunxi: H616: add DRAM type selection
In reply to Andre PrzywaraFrom: iuncuim <[email protected]>
Allwinner H616 SoC supports several types of DRAM memory. To further integrate other types of memory, we need to add this delimitation.
--- arch/arm/mach-sunxi/Kconfig | 10 +++++++++- arch/arm/mach-sunxi/dram_timings/Makefile | 3 +-- configs/orangepi_zero2_defconfig | 1 + configs/x96_mate_defconfig | 1 + 4 files changed, 12 insertions(+), 3 deletions(-)
arch/arm/mach-sunxi/Kconfig +9 -1
@@ -442,7 +442,7 @@ config ARM_BOOT_HOOK_RMR This allows both the SPL and the U-Boot proper to be entered in either mode and switch to AArch64 if needed. -if SUNXI_DRAM_DW || DRAM_SUN50I_H6 +if SUNXI_DRAM_DW || DRAM_SUN50I_H6 || DRAM_SUN50I_H616 config SUNXI_DRAM_DDR3 bool
@@ -487,6 +487,14 @@ config SUNXI_DRAM_H6_DDR3_1333 This option is the DDR3 timing used by the boot0 on H6 TV boxes which use a DDR3-1333 timing. +config SUNXI_DRAM_H616_DDR3_1333 + bool "DDR3-1333 boot0 timings on the H616 DRAM controller" + select SUNXI_DRAM_DDR3 + depends on DRAM_SUN50I_H616 + ---help--- + This option is the DDR3 timing used by the boot0 on H616 TV boxes + which use a DDR3-1333 timing. + config SUNXI_DRAM_DDR2_V3S bool "DDR2 found in V3s chip" select SUNXI_DRAM_DDR2
arch/arm/mach-sunxi/dram_timings/Makefile +1 -2
@@ -3,5 +3,4 @@ obj-$(CONFIG_SUNXI_DRAM_LPDDR3_STOCK) += lpddr3_stock.o obj-$(CONFIG_SUNXI_DRAM_DDR2_V3S) += ddr2_v3s.o obj-$(CONFIG_SUNXI_DRAM_H6_LPDDR3) += h6_lpddr3.o obj-$(CONFIG_SUNXI_DRAM_H6_DDR3_1333) += h6_ddr3_1333.o -# currently only DDR3 is supported on H616 -obj-$(CONFIG_MACH_SUN50I_H616) += h616_ddr3_1333.o +obj-$(CONFIG_SUNXI_DRAM_H616_DDR3_1333) += h616_ddr3_1333.o
configs/orangepi_zero2_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e CONFIG_DRAM_SUN50I_H616_CA_DRI=0x0e0e CONFIG_DRAM_SUN50I_H616_TPR10=0xf83438 CONFIG_MACH_SUN50I_H616=y +CONFIG_SUNXI_DRAM_H616_DDR3_1333=y CONFIG_R_I2C_ENABLE=y CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
configs/x96_mate_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_DRAM_SUN50I_H616_TPR10=0x2f0007 CONFIG_DRAM_SUN50I_H616_TPR11=0xffffdddd CONFIG_DRAM_SUN50I_H616_TPR12=0xfedf7557 CONFIG_MACH_SUN50I_H616=y +CONFIG_SUNXI_DRAM_H616_DDR3_1333=y CONFIG_R_I2C_ENABLE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y
Signature · 1 line
2.35.8
Jernej Škrabec
maintainerRe: [PATCH 4/5] sunxi: H616: add DRAM type selection
Dne sreda, 07. junij 2023 ob 02:07:44 CEST je Andre Przywara napisal(a):
Quoted 25 lines
From: iuncuim <[email protected]>
Allwinner H616 SoC supports several types of DRAM memory. To further integrate other types of memory, we need to add this delimitation.
--- arch/arm/mach-sunxi/Kconfig | 10 +++++++++- arch/arm/mach-sunxi/dram_timings/Makefile | 3 +-- configs/orangepi_zero2_defconfig | 1 + configs/x96_mate_defconfig | 1 + 4 files changed, 12 insertions(+), 3 deletions(-)arch/arm/mach-sunxi/Kconfig +1
-1@@ -442,7 +442,7 @@ config ARM_BOOT_HOOK_RMR This allows both the SPL and the U-Boot proper to be entered in either mode and switch to AArch64 if needed. -if SUNXI_DRAM_DW || DRAM_SUN50I_H6 +if SUNXI_DRAM_DW || DRAM_SUN50I_H6 || DRAM_SUN50I_H616 config SUNXI_DRAM_DDR3 bool
arch/arm/mach-sunxi/Kconfig config SUNXI_DRAM_H6_DDR3_1333 · line 496
Quoted 10 lines
arch/arm/mach-sunxi/Kconfig +7
-0@@ -487,6 +487,14 @@ config SUNXI_DRAM_H6_DDR3_1333 This option is the DDR3 timing used by the boot0 on H6 TV boxes which use a DDR3-1333 timing. +config SUNXI_DRAM_H616_DDR3_1333 + bool "DDR3-1333 boot0 timings on the H616 DRAM controller" + select SUNXI_DRAM_DDR3 + depends on DRAM_SUN50I_H616 + ---help--- + This option is the DDR3 timing used by the boot0 on H616 TV boxes + which use a DDR3-1333 timing.
I'm always a bit unsure about help part. There is no need for "---", right? I also usually ident help block with extra two spaces. Do we have any rules for that?
Apart from that and SoB tag, it looks good.
Best regards,
Jernej
Quoted 40 lines
arch/arm/mach-sunxi/Kconfig +1
-0+ config SUNXI_DRAM_DDR2_V3S bool "DDR2 found in V3s chip" select SUNXI_DRAM_DDR2arch/arm/mach-sunxi/dram_timings/Makefile +1
-2@@ -3,5 +3,4 @@ obj-$(CONFIG_SUNXI_DRAM_LPDDR3_STOCK) += lpddr3_stock.o obj-$(CONFIG_SUNXI_DRAM_DDR2_V3S) += ddr2_v3s.o obj-$(CONFIG_SUNXI_DRAM_H6_LPDDR3) += h6_lpddr3.o obj-$(CONFIG_SUNXI_DRAM_H6_DDR3_1333) += h6_ddr3_1333.o -# currently only DDR3 is supported on H616 -obj-$(CONFIG_MACH_SUN50I_H616) += h616_ddr3_1333.o +obj-$(CONFIG_SUNXI_DRAM_H616_DDR3_1333) += h616_ddr3_1333.oconfigs/orangepi_zero2_defconfig +1
-0@@ -7,6 +7,7 @@ CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e CONFIG_DRAM_SUN50I_H616_CA_DRI=0x0e0e CONFIG_DRAM_SUN50I_H616_TPR10=0xf83438 CONFIG_MACH_SUN50I_H616=y +CONFIG_SUNXI_DRAM_H616_DDR3_1333=y CONFIG_R_I2C_ENABLE=y CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not setconfigs/x96_mate_defconfig +1
-0@@ -10,6 +10,7 @@ CONFIG_DRAM_SUN50I_H616_TPR10=0x2f0007 CONFIG_DRAM_SUN50I_H616_TPR11=0xffffdddd CONFIG_DRAM_SUN50I_H616_TPR12=0xfedf7557 CONFIG_MACH_SUN50I_H616=y +CONFIG_SUNXI_DRAM_H616_DDR3_1333=y CONFIG_R_I2C_ENABLE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y
PATCH 5/5 sunxi: H616: add LPDDR3 DRAM support
In reply to Andre PrzywaraFrom: iuncuim <[email protected]>
The H616 SoC has support for several types of DRAM: DDR3, LPDDR3, DDR4 and LPDDR4.
At the moment, the driver only supports DDR3 memory. Let's extend the driver to support the LPDDR3 memory. All "magic" values obtained from the boot0.
--- arch/arm/mach-sunxi/Kconfig | 8 + arch/arm/mach-sunxi/dram_sun50i_h616.c | 193 +++++++++++++----- arch/arm/mach-sunxi/dram_timings/Makefile | 1 + .../arm/mach-sunxi/dram_timings/h616_lpddr3.c | 95 +++++++++ 4 files changed, 242 insertions(+), 55 deletions(-) create mode 100644 arch/arm/mach-sunxi/dram_timings/h616_lpddr3.c
arch/arm/mach-sunxi/Kconfig +8 -0
@@ -487,6 +487,14 @@ config SUNXI_DRAM_H6_DDR3_1333 This option is the DDR3 timing used by the boot0 on H6 TV boxes which use a DDR3-1333 timing. +config SUNXI_DRAM_H616_LPDDR3 + bool "LPDDR3 DRAM chips on the H616 DRAM controller" + select SUNXI_DRAM_LPDDR3 + depends on DRAM_SUN50I_H616 + ---help--- + This option is the LPDDR3 timing used by the stock boot0 by + Allwinner. + config SUNXI_DRAM_H616_DDR3_1333 bool "DDR3-1333 boot0 timings on the H616 DRAM controller" select SUNXI_DRAM_DDR3
arch/arm/mach-sunxi/dram_sun50i_h616.c +138 -55
266 lines not on this page · raw message
arch/arm/mach-sunxi/dram_timings/Makefile +1 -0
@@ -4,3 +4,4 @@ obj-$(CONFIG_SUNXI_DRAM_DDR2_V3S) += ddr2_v3s.o obj-$(CONFIG_SUNXI_DRAM_H6_LPDDR3) += h6_lpddr3.o obj-$(CONFIG_SUNXI_DRAM_H6_DDR3_1333) += h6_ddr3_1333.o obj-$(CONFIG_SUNXI_DRAM_H616_DDR3_1333) += h616_ddr3_1333.o +obj-$(CONFIG_SUNXI_DRAM_H616_LPDDR3) += h616_lpddr3.o
arch/arm/mach-sunxi/dram_timings/h616_lpddr3.c new file +95 -0
95 lines not on this page · raw message
Signature · 1 line
2.35.8
Jernej Škrabec
maintainerRe: [PATCH 5/5] sunxi: H616: add LPDDR3 DRAM support
Dne sreda, 07. junij 2023 ob 02:07:45 CEST je Andre Przywara napisal(a):
Quoted 80 lines
From: iuncuim <[email protected]>
The H616 SoC has support for several types of DRAM: DDR3, LPDDR3, DDR4 and LPDDR4.
At the moment, the driver only supports DDR3 memory. Let's extend the driver to support the LPDDR3 memory. All "magic" values obtained from the boot0.--- arch/arm/mach-sunxi/Kconfig | 8 + arch/arm/mach-sunxi/dram_sun50i_h616.c | 193 +++++++++++++----- arch/arm/mach-sunxi/dram_timings/Makefile | 1 + .../arm/mach-sunxi/dram_timings/h616_lpddr3.c | 95 +++++++++ 4 files changed, 242 insertions(+), 55 deletions(-) create mode 100644 arch/arm/mach-sunxi/dram_timings/h616_lpddr3.carch/arm/mach-sunxi/Kconfig +8
-0@@ -487,6 +487,14 @@ config SUNXI_DRAM_H6_DDR3_1333 This option is the DDR3 timing used by the boot0 on H6 TV boxes which use a DDR3-1333 timing. +config SUNXI_DRAM_H616_LPDDR3 + bool "LPDDR3 DRAM chips on the H616 DRAM controller" + select SUNXI_DRAM_LPDDR3 + depends on DRAM_SUN50I_H616 + ---help--- + This option is the LPDDR3 timing used by the stock boot0 by + Allwinner. + config SUNXI_DRAM_H616_DDR3_1333 bool "DDR3-1333 boot0 timings on the H616 DRAM controller" select SUNXI_DRAM_DDR3arch/arm/mach-sunxi/dram_sun50i_h616.c +18
-3@@ -228,10 +228,17 @@ static void mctl_set_addrmap(const struct dram_config *config) }static const u8 phy_init[] = { +#ifdef CONFIG_SUNXI_DRAM_H616_DDR3_13330x07 ,0x0b ,0x02 ,0x16 ,0x0d ,0x0e ,0x14 ,0x19 ,0x0a ,0x15 ,0x03 ,0x13 ,0x04 ,0x0c ,0x10 ,0x06 ,0x0f ,0x11 ,0x1a ,0x01 ,0x12 ,0x17 ,0x00 ,0x08 , 0x09, 0x05, 0x18 +#elif defined(CONFIG_SUNXI_DRAM_H616_LPDDR3) +0x18 ,0x06 ,0x00 ,0x05 ,0x04 ,0x03 ,0x09 ,0x02 , +0x08 ,0x01 ,0x0a ,0x0b ,0x0c ,0x0d ,0x0e ,0x0f , +0x10 ,0x11 ,0x12 ,0x13 ,0x14 ,0x15 ,0x16 ,0x07 , +0x17 ,0x19 ,0x1a +#endif };static void mctl_phy_configure_odt (const struct dram_para *para)@@ -263,19 +270,31 @@ static void mctl_phy_configure_odt(const struct dram_para *para)writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x34c ); val = para->dx_odt &0x1f ; -writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x380 ); +if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) +writel_relaxed (0 ,SUNXI_DRAM_PHY0_BASE +0x380 ); +else +writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x380 );writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x384 ); val = (para->dx_odt >>8 ) &0x1f ; -writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x3c0 ); +if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) +writel_relaxed (0 ,SUNXI_DRAM_PHY0_BASE +0x3c0 ); +else +writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x3c0 );writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x3c4 ); val = (para->dx_odt >>16 ) &0x1f ; -writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x400 ); +if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) +writel_relaxed (0 ,SUNXI_DRAM_PHY0_BASE +0x400 ); +else
arch/arm/mach-sunxi/dram_sun50i_h616.c static void mctl_phy_configure_odt(const struct dram_para *para) · line 298
Quoted 10 lines
arch/arm/mach-sunxi/dram_sun50i_h616.c +5
-1+writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x400 );writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x404 ); val = (para->dx_odt >>24 ) &0x1f ; -writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x440 ); +if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) +writel_relaxed (0 ,SUNXI_DRAM_PHY0_BASE +0x440 ); +else +writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x440 );writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x444 );
Above dx_odt oriented changes are not needed. They depend on Kconfig symbol, which can simply be set to 0.
I didn't do detailed check, but if it works, it should be ok. Were calculated values here compared to vendor driver?
Best regards,
Jernej
Quoted 75 lines
arch/arm/mach-sunxi/dram_sun50i_h616.c +40
-24dmb ();@@ -794,31 +813,47 @@ static void mctl_phy_ca_bit_delay_compensation(const struct dram_para *para,writel (val,SUNXI_DRAM_PHY0_BASE +0x7e0 );writel (val,SUNXI_DRAM_PHY0_BASE +0x7f4 ); -/* following configuration is DDR3 specific */ - val = (para->tpr10 >>7 ) &0x1e ; -if (para->tpr2 &1 ) { -writel (val,SUNXI_DRAM_PHY0_BASE +0x794 ); -if (config->ranks ==2 ) { - val = (para->tpr10 >>11 ) &0x1e ; -writel (val,SUNXI_DRAM_PHY0_BASE +0x7e4 ); - } -if (para->tpr0 &BIT (31 )) { - val = (para->tpr0 <<1 ) &0x3e ; -writel (val,SUNXI_DRAM_PHY0_BASE +0x790 ); -writel (val,SUNXI_DRAM_PHY0_BASE +0x7b8 ); -writel (val,SUNXI_DRAM_PHY0_BASE +0x7cc ); - } - }else { -writel (val,SUNXI_DRAM_PHY0_BASE +0x7d4 ); -if (config->ranks ==2 ) { - val = (para->tpr10 >>11 ) &0x1e ; -writel (val,SUNXI_DRAM_PHY0_BASE +0x79c ); +if (para->type ==SUNXI_DRAM_TYPE_DDR3 ) { + val = (para->tpr10 >>7 ) &0x1e ; +if (para->tpr2 &1 ) { +writel (val,SUNXI_DRAM_PHY0_BASE +0x794 ); +if (config->ranks ==2 ) { + val = (para->tpr10 >>11 ) &0x1e ; +writel (val,SUNXI_DRAM_PHY0_BASE +0x7e4 ); + } +if (para->tpr0 &BIT (31 )) { + val = (para->tpr0 <<1 ) &0x3e ; +writel (val,SUNXI_DRAM_PHY0_BASE +0x790 ); +writel (val,SUNXI_DRAM_PHY0_BASE +0x7b8 ); +writel (val,SUNXI_DRAM_PHY0_BASE +0x7cc ); + } + }else { +writel (val,SUNXI_DRAM_PHY0_BASE +0x7d4 ); +if (config->ranks ==2 ) { + val = (para->tpr10 >>11 ) &0x1e ; +writel (val,SUNXI_DRAM_PHY0_BASE +0x79c ); + } +if (para->tpr0 &BIT (31 )) { + val = (para->tpr0 <<1 ) &0x3e ; +writel (val,SUNXI_DRAM_PHY0_BASE +0x78c ); +writel (val,SUNXI_DRAM_PHY0_BASE +0x7a4 ); +writel (val,SUNXI_DRAM_PHY0_BASE +0x7b8 ); + } } -if (para->tpr0 &BIT (31 )) { - val = (para->tpr0 <<1 ) &0x3e ; -writel (val,SUNXI_DRAM_PHY0_BASE +0x78c ); -writel (val,SUNXI_DRAM_PHY0_BASE +0x7a4 ); -writel (val,SUNXI_DRAM_PHY0_BASE +0x7b8 ); + }else if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) { + val = (para->tpr10 >>7 ) &0x1e ; +if (para->tpr2 &1 ) { +writel (val,SUNXI_DRAM_PHY0_BASE +0x7a0 ); +if (config->ranks ==2 ) { + val = (para->tpr10 >>11 ) &0x1e ; +writel (val,SUNXI_DRAM_PHY0_BASE +0x79c ); + } + }else { +writel (val,SUNXI_DRAM_PHY0_BASE +0x7e8 ); +if (config->ranks ==2 ) { + val = (para->tpr10 >>11 ) &0x1e ; +writel (val,SUNXI_DRAM_PHY0_BASE +0x7f8 ); + } } } }
arch/arm/mach-sunxi/dram_sun50i_h616.c static bool mctl_phy_init(const struct dram_para *para, · line 882
Quoted 10 lines
arch/arm/mach-sunxi/dram_sun50i_h616.c +5
-2@@ -840,11 +875,22 @@ static bool mctl_phy_init(const struct dram_para *para,clrsetbits_le32 (SUNXI_DRAM_PHY0_BASE +0x3c ,0xf , val);if (para->tpr2 &0x100 ) { - val =9 ; - val2 =7 ; +if (para->type ==SUNXI_DRAM_TYPE_DDR3 ) { + val =9 ; + val2 =7 ; + }else if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) { +// TODO: untested setup: use some values for now
I'm not fan of such todos.
Quoted 27 lines
arch/arm/mach-sunxi/dram_sun50i_h616.c +15
-4+ val =14 ; + val2 =8 ; + } }else { - val =13 ; - val2 =9 ; +if (para->type ==SUNXI_DRAM_TYPE_DDR3 ) { + val =13 ; + val2 =9 ; + }else if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) { + val =14 ; + val2 =8 ; + } }writel (val,SUNXI_DRAM_PHY0_BASE +0x14 );@@ -869,12 +915,20 @@ static bool mctl_phy_init(const struct dram_para *para,if (para->tpr10 &TPR10_CA_BIT_DELAY )mctl_phy_ca_bit_delay_compensation (para, config); -writel (0x80 ,SUNXI_DRAM_PHY0_BASE +0x3dc ); -writel (0x80 ,SUNXI_DRAM_PHY0_BASE +0x45c ); +if (para->type ==SUNXI_DRAM_TYPE_DDR3 ) + val =0x80 ; +else if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) + val =0xc0 ; +writel (val,SUNXI_DRAM_PHY0_BASE +0x3dc );
arch/arm/mach-sunxi/dram_sun50i_h616.c static bool mctl_phy_init(const struct dram_para *para, · line 931
Quoted 10 lines
arch/arm/mach-sunxi/dram_sun50i_h616.c +6
-1+writel (val,SUNXI_DRAM_PHY0_BASE +0x45c );mctl_phy_configure_odt (para); -clrsetbits_le32 (SUNXI_DRAM_PHY0_BASE +4 ,7 ,0xa ); +if (para->type ==SUNXI_DRAM_TYPE_DDR3 ) { +clrsetbits_le32 (SUNXI_DRAM_PHY0_BASE +4 ,7 ,0xa ); + }else if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) { +clrsetbits_le32 (SUNXI_DRAM_PHY0_BASE +4 ,7 ,0xb ); + }
To be consistent code style wise, above block could be rewritten to set val variable to either 0xa or 0xb and set block after that.
Quoted 212 lines
arch/arm/mach-sunxi/dram_sun50i_h616.c +49
-20if (para->clk <=672 )writel (0xf ,SUNXI_DRAM_PHY0_BASE +0x20 );@@ -924,21 +978,39 @@ static bool mctl_phy_init(const struct dram_para *para, mr2 =0x20 ; } -writel (mr0, &mctl_ctl->mrctrl1); -writel (0x80000030 , &mctl_ctl->mrctrl0); -mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); - -writel (4 , &mctl_ctl->mrctrl1); -writel (0x80001030 , &mctl_ctl->mrctrl0); -mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); - -writel (mr2, &mctl_ctl->mrctrl1); -writel (0x80002030 , &mctl_ctl->mrctrl0); -mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); - -writel (0 , &mctl_ctl->mrctrl1); -writel (0x80003030 , &mctl_ctl->mrctrl0); -mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); +if (para->type ==SUNXI_DRAM_TYPE_DDR3 ) { +writel (mr0, &mctl_ctl->mrctrl1); +writel (0x80000030 , &mctl_ctl->mrctrl0); +mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); + +writel (4 , &mctl_ctl->mrctrl1); +writel (0x80001030 , &mctl_ctl->mrctrl0); +mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); + +writel (mr2, &mctl_ctl->mrctrl1); +writel (0x80002030 , &mctl_ctl->mrctrl0); +mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); + +writel (0 , &mctl_ctl->mrctrl1); +writel (0x80003030 , &mctl_ctl->mrctrl0); +mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); + }else if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) { +writel (mr0, &mctl_ctl->mrctrl1); +writel (0x800000f0 , &mctl_ctl->mrctrl0); +mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); + +writel (4 , &mctl_ctl->mrctrl1); +writel (0x800000f0 , &mctl_ctl->mrctrl0); +mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); + +writel (mr2, &mctl_ctl->mrctrl1); +writel (0x800000f0 , &mctl_ctl->mrctrl0); +mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); + +writel (0x301 , &mctl_ctl->mrctrl1); +writel (0x800000f0 , &mctl_ctl->mrctrl0); +mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); + }writel (0 ,SUNXI_DRAM_PHY0_BASE +0x54 );@@ -1014,7 +1086,10 @@ static bool mctl_ctrl_init(const struct dram_para *para,setbits_le32 (&mctl_com->unk_0x008,0xff00 ); reg_val =MSTR_BURST_LENGTH (8 ) |MSTR_ACTIVE_RANKS (config->ranks); - reg_val |=MSTR_DEVICETYPE_DDR3 |MSTR_2TMODE ; +if (para->type ==SUNXI_DRAM_TYPE_DDR3 ) + reg_val |=MSTR_DEVICETYPE_DDR3 |MSTR_2TMODE ; +else if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) + reg_val |=MSTR_DEVICETYPE_LPDDR3 ;if (config->bus_full_width) reg_val |=MSTR_BUSWIDTH_FULL ;else @@ -1026,10 +1101,14 @@ static bool mctl_ctrl_init(const struct dram_para *para,else writel (0x0201 , &mctl_ctl->odtmap); -writel (0x06000400 , &mctl_ctl->odtcfg); -writel (0x06000400 , &mctl_ctl->unk_0x2240); -writel (0x06000400 , &mctl_ctl->unk_0x3240); -writel (0x06000400 , &mctl_ctl->unk_0x4240); +if (para->type ==SUNXI_DRAM_TYPE_DDR3 ) + reg_val =0x06000400 ; +else if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) + reg_val =0x09020400 ; +writel (reg_val, &mctl_ctl->odtcfg); +writel (reg_val, &mctl_ctl->unk_0x2240); +writel (reg_val, &mctl_ctl->unk_0x3240); +writel (reg_val, &mctl_ctl->unk_0x4240);writel (BIT (31 ), &mctl_com->cr);@@ -1163,7 +1242,11 @@ static unsigned long mctl_calc_size(const struct dram_config *config)static const struct dram_para para = { .clk =CONFIG_DRAM_CLK , +#ifdef CONFIG_SUNXI_DRAM_H616_DDR3_1333 .type =SUNXI_DRAM_TYPE_DDR3 , +#elif defined(CONFIG_SUNXI_DRAM_H616_LPDDR3) + .type =SUNXI_DRAM_TYPE_LPDDR3 , +#endif .dx_odt =CONFIG_DRAM_SUN50I_H616_DX_ODT , .dx_dri =CONFIG_DRAM_SUN50I_H616_DX_DRI , .ca_dri =CONFIG_DRAM_SUN50I_H616_CA_DRI ,arch/arm/mach-sunxi/dram_timings/Makefile +1
-0@@ -4,3 +4,4 @@ obj-$(CONFIG_SUNXI_DRAM_DDR2_V3S) += ddr2_v3s.o obj-$(CONFIG_SUNXI_DRAM_H6_LPDDR3) += h6_lpddr3.o obj-$(CONFIG_SUNXI_DRAM_H6_DDR3_1333) += h6_ddr3_1333.o obj-$(CONFIG_SUNXI_DRAM_H616_DDR3_1333) += h616_ddr3_1333.o +obj-$(CONFIG_SUNXI_DRAM_H616_LPDDR3) += h616_lpddr3.oarch/arm/mach-sunxi/dram_timings/h616_lpddr3.c new file +95
-0@@ -0,0 +1,95 @@ +/* +* sun50i H616 LPDDR3 timings, as programmed by Allwinner's boot0 +* +* The chips are probably able to be driven by a faster clock, but boot0 +* uses a more conservative timing (as usual). +* +* (C) Copyright 2020 Jernej Skrabec <[email protected]> +* Based on H6 DDR3 timings: +* (C) Copyright 2018,2019 Arm Ltd. +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#include <common.h> +#include <asm/arch/dram.h> +#include <asm/arch/cpu.h> + +void mctl_set_timing_params (const struct dram_para *para) +{ +struct sunxi_mctl_ctl_reg *const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE ; + +u8 tccd =2 ; +u8 tfaw =ns_to_t (50 ); +u8 trrd =max (ns_to_t (6 ),4 ); +u8 trcd =ns_to_t (24 ); +u8 trc =ns_to_t (70 ); +u8 txp =max (ns_to_t (8 ),3 ); +u8 trtp =max (ns_to_t (8 ),2 ); +u8 trp =ns_to_t (27 ); +u8 tras =ns_to_t (41 ); +u16 trefi =ns_to_t (7800 ) /64 ; +u16 trfc =ns_to_t (210 ); +u16 txsr =88 ; + +u8 tmrw =5 ; +u8 tmrd =5 ; +u8 tmod =max (ns_to_t (15 ),12 ); +u8 tcke =max (ns_to_t (6 ),3 ); +u8 tcksrx =max (ns_to_t (12 ),4 ); +u8 tcksre =max (ns_to_t (12 ),4 ); +u8 tckesr = tcke +2 ; +u8 trasmax = (para->clk /2 ) /16 ; +u8 txs =ns_to_t (360 ) /32 ; +u8 txsdll =16 ; +u8 txsabort =4 ; +u8 txsfast =4 ; +u8 tcl =7 ; +u8 tcwl =4 ; +u8 t_rdata_en =12 ; +u8 t_wr_lat =6 ; + +u8 twtp =16 ; +u8 twr2rd = trtp +9 ; +u8 trd2wr =13 ; + +/* DRAM timing grabbed from tvbox with LPDDR3 memory */ +writel ((twtp <<24 ) | (tfaw <<16 ) | (trasmax <<8 ) | tras, + &mctl_ctl->dramtmg[0 ]); +writel ((txp <<16 ) | (trtp <<8 ) | trc, &mctl_ctl->dramtmg[1 ]); +writel ((tcwl <<24 ) | (tcl <<16 ) | (trd2wr <<8 ) | twr2rd, + &mctl_ctl->dramtmg[2 ]); +writel ((tmrw <<20 ) | (tmrd <<12 ) | tmod, &mctl_ctl->dramtmg[3 ]); +writel ((trcd <<24 ) | (tccd <<16 ) | (trrd <<8 ) | trp, + &mctl_ctl->dramtmg[4 ]); +writel ((tcksrx <<24 ) | (tcksre <<16 ) | (tckesr <<8 ) | tcke, + &mctl_ctl->dramtmg[5 ]); +/* Value suggested by ZynqMP manual and used by libdram */ +writel ((txp +2 ) |0x02020000 , &mctl_ctl->dramtmg[6 ]); +writel ((txsfast <<24 ) | (txsabort <<16 ) | (txsdll <<8 ) | txs, + &mctl_ctl->dramtmg[8 ]); +writel (0x00020208 , &mctl_ctl->dramtmg[9 ]); +writel (0xE0C05 , &mctl_ctl->dramtmg[10 ]); +writel (0x440C021C , &mctl_ctl->dramtmg[11 ]); +writel (8 , &mctl_ctl->dramtmg[12 ]); +writel (0xA100002 , &mctl_ctl->dramtmg[13 ]); +writel (txsr, &mctl_ctl->dramtmg[14 ]); + +writel (0x4f0112 , &mctl_ctl->init[0 ]); +writel (0x420000 , &mctl_ctl->init[1 ]); +writel (0xd05 , &mctl_ctl->init[2 ]); +writel (0x83001c , &mctl_ctl->init[3 ]); +writel (0x00010000 , &mctl_ctl->init[4 ]); + +writel (0 , &mctl_ctl->dfimisc); +clrsetbits_le32 (&mctl_ctl->rankctl,0xff0 ,0x660 ); + +/* Configure DFI timing */ +writel (t_wr_lat |0x2000000 | (t_rdata_en <<16 ) |0x808000 , + &mctl_ctl->dfitmg0); +writel (0x100202 , &mctl_ctl->dfitmg1); + +/* set refresh timing */ +writel ((trefi <<16 ) | trfc, &mctl_ctl->rfshtmg); +}
Re: [PATCH 5/5] sunxi: H616: add LPDDR3 DRAM support
On Fri, 09 Jun 2023 22:38:38 +0200
Jernej Škrabec <[email protected]> wrote:
Hi,
Quoted 84 lines
Dne sreda, 07. junij 2023 ob 02:07:45 CEST je Andre Przywara napisal(a):
Quoted 83 lines
From: iuncuim <[email protected]>
The H616 SoC has support for several types of DRAM: DDR3, LPDDR3, DDR4 and LPDDR4.
At the moment, the driver only supports DDR3 memory. Let's extend the driver to support the LPDDR3 memory. All "magic" values obtained from the boot0.--- arch/arm/mach-sunxi/Kconfig | 8 + arch/arm/mach-sunxi/dram_sun50i_h616.c | 193 +++++++++++++----- arch/arm/mach-sunxi/dram_timings/Makefile | 1 + .../arm/mach-sunxi/dram_timings/h616_lpddr3.c | 95 +++++++++ 4 files changed, 242 insertions(+), 55 deletions(-) create mode 100644 arch/arm/mach-sunxi/dram_timings/h616_lpddr3.carch/arm/mach-sunxi/Kconfig +8
-0@@ -487,6 +487,14 @@ config SUNXI_DRAM_H6_DDR3_1333 This option is the DDR3 timing used by the boot0 on H6 TV boxes which use a DDR3-1333 timing. +config SUNXI_DRAM_H616_LPDDR3 + bool "LPDDR3 DRAM chips on the H616 DRAM controller" + select SUNXI_DRAM_LPDDR3 + depends on DRAM_SUN50I_H616 + ---help--- + This option is the LPDDR3 timing used by the stock boot0 by + Allwinner. + config SUNXI_DRAM_H616_DDR3_1333 bool "DDR3-1333 boot0 timings on the H616 DRAM controller" select SUNXI_DRAM_DDR3arch/arm/mach-sunxi/dram_sun50i_h616.c +19
-3@@ -228,10 +228,17 @@ static void mctl_set_addrmap(const struct dram_config *config) }static const u8 phy_init[] = { +#ifdef CONFIG_SUNXI_DRAM_H616_DDR3_13330x07 ,0x0b ,0x02 ,0x16 ,0x0d ,0x0e ,0x14 ,0x19 ,0x0a ,0x15 ,0x03 ,0x13 ,0x04 ,0x0c ,0x10 ,0x06 ,0x0f ,0x11 ,0x1a ,0x01 ,0x12 ,0x17 ,0x00 ,0x08 , 0x09, 0x05, 0x18 +#elif defined(CONFIG_SUNXI_DRAM_H616_LPDDR3) +0x18 ,0x06 ,0x00 ,0x05 ,0x04 ,0x03 ,0x09 ,0x02 , +0x08 ,0x01 ,0x0a ,0x0b ,0x0c ,0x0d ,0x0e ,0x0f , +0x10 ,0x11 ,0x12 ,0x13 ,0x14 ,0x15 ,0x16 ,0x07 , +0x17 ,0x19 ,0x1a +#endif };static void mctl_phy_configure_odt (const struct dram_para *para)@@ -263,19 +270,31 @@ static void mctl_phy_configure_odt(const struct dram_para *para)writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x34c ); val = para->dx_odt &0x1f ; -writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x380 ); +if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) +writel_relaxed (0 ,SUNXI_DRAM_PHY0_BASE +0x380 ); +else +writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x380 );writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x384 ); val = (para->dx_odt >>8 ) &0x1f ; -writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x3c0 ); +if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) +writel_relaxed (0 ,SUNXI_DRAM_PHY0_BASE +0x3c0 ); +else +writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x3c0 );writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x3c4 ); val = (para->dx_odt >>16 ) &0x1f ; -writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x400 ); +if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) +writel_relaxed (0 ,SUNXI_DRAM_PHY0_BASE +0x400 ); +else +writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x400 );writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x404 );
Quoted 10 lines
arch/arm/mach-sunxi/dram_sun50i_h616.c static void mctl_phy_configure_odt(const struct dram_para *para) · line 298
Quoted 7 lines
arch/arm/mach-sunxi/dram_sun50i_h616.c +4
-1val = (para->dx_odt >>24 ) &0x1f ; -writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x440 ); +if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) +writel_relaxed (0 ,SUNXI_DRAM_PHY0_BASE +0x440 ); +else +writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x440 );writel_relaxed (val,SUNXI_DRAM_PHY0_BASE +0x444 );Above
dx_odtoriented changes are not needed. They depend onKconfigsymbol, which can simply be set to 0.
Ha, I thought so as well, but if you look closely, it's only *one* of the two writes which turn to zero, the other register stays at the Kconfig value. Annoying, I know ;-)
I couldn't think of a shorter or even cleaner way to express this, really, apart from a macro maybe, so I guess we have to live with it.
Cheers,
Andre
Quoted 351 lines
I didn't do detailed check, but if it works, it should be ok. Were calculated values here compared to vendor driver?
Best regards,
JernejQuoted 75 lines
arch/arm/mach-sunxi/dram_sun50i_h616.c +40
-24dmb ();@@ -794,31 +813,47 @@ static void mctl_phy_ca_bit_delay_compensation(const struct dram_para *para,writel (val,SUNXI_DRAM_PHY0_BASE +0x7e0 );writel (val,SUNXI_DRAM_PHY0_BASE +0x7f4 ); -/* following configuration is DDR3 specific */ - val = (para->tpr10 >>7 ) &0x1e ; -if (para->tpr2 &1 ) { -writel (val,SUNXI_DRAM_PHY0_BASE +0x794 ); -if (config->ranks ==2 ) { - val = (para->tpr10 >>11 ) &0x1e ; -writel (val,SUNXI_DRAM_PHY0_BASE +0x7e4 ); - } -if (para->tpr0 &BIT (31 )) { - val = (para->tpr0 <<1 ) &0x3e ; -writel (val,SUNXI_DRAM_PHY0_BASE +0x790 ); -writel (val,SUNXI_DRAM_PHY0_BASE +0x7b8 ); -writel (val,SUNXI_DRAM_PHY0_BASE +0x7cc ); - } - }else { -writel (val,SUNXI_DRAM_PHY0_BASE +0x7d4 ); -if (config->ranks ==2 ) { - val = (para->tpr10 >>11 ) &0x1e ; -writel (val,SUNXI_DRAM_PHY0_BASE +0x79c ); +if (para->type ==SUNXI_DRAM_TYPE_DDR3 ) { + val = (para->tpr10 >>7 ) &0x1e ; +if (para->tpr2 &1 ) { +writel (val,SUNXI_DRAM_PHY0_BASE +0x794 ); +if (config->ranks ==2 ) { + val = (para->tpr10 >>11 ) &0x1e ; +writel (val,SUNXI_DRAM_PHY0_BASE +0x7e4 ); + } +if (para->tpr0 &BIT (31 )) { + val = (para->tpr0 <<1 ) &0x3e ; +writel (val,SUNXI_DRAM_PHY0_BASE +0x790 ); +writel (val,SUNXI_DRAM_PHY0_BASE +0x7b8 ); +writel (val,SUNXI_DRAM_PHY0_BASE +0x7cc ); + } + }else { +writel (val,SUNXI_DRAM_PHY0_BASE +0x7d4 ); +if (config->ranks ==2 ) { + val = (para->tpr10 >>11 ) &0x1e ; +writel (val,SUNXI_DRAM_PHY0_BASE +0x79c ); + } +if (para->tpr0 &BIT (31 )) { + val = (para->tpr0 <<1 ) &0x3e ; +writel (val,SUNXI_DRAM_PHY0_BASE +0x78c ); +writel (val,SUNXI_DRAM_PHY0_BASE +0x7a4 ); +writel (val,SUNXI_DRAM_PHY0_BASE +0x7b8 ); + } } -if (para->tpr0 &BIT (31 )) { - val = (para->tpr0 <<1 ) &0x3e ; -writel (val,SUNXI_DRAM_PHY0_BASE +0x78c ); -writel (val,SUNXI_DRAM_PHY0_BASE +0x7a4 ); -writel (val,SUNXI_DRAM_PHY0_BASE +0x7b8 ); + }else if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) { + val = (para->tpr10 >>7 ) &0x1e ; +if (para->tpr2 &1 ) { +writel (val,SUNXI_DRAM_PHY0_BASE +0x7a0 ); +if (config->ranks ==2 ) { + val = (para->tpr10 >>11 ) &0x1e ; +writel (val,SUNXI_DRAM_PHY0_BASE +0x79c ); + } + }else { +writel (val,SUNXI_DRAM_PHY0_BASE +0x7e8 ); +if (config->ranks ==2 ) { + val = (para->tpr10 >>11 ) &0x1e ; +writel (val,SUNXI_DRAM_PHY0_BASE +0x7f8 ); + } } } }arch/arm/mach-sunxi/dram_sun50i_h616.c static bool mctl_phy_init(const struct dram_para *para, · line 882
Quoted 10 lines
arch/arm/mach-sunxi/dram_sun50i_h616.c +5
-2@@ -840,11 +875,22 @@ static bool mctl_phy_init(const struct dram_para *para,clrsetbits_le32 (SUNXI_DRAM_PHY0_BASE +0x3c ,0xf , val);if (para->tpr2 &0x100 ) { - val =9 ; - val2 =7 ; +if (para->type ==SUNXI_DRAM_TYPE_DDR3 ) { + val =9 ; + val2 =7 ; + }else if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) { +// TODO: untested setup: use some values for now I'm not fan of such todos.
Quoted 27 lines
arch/arm/mach-sunxi/dram_sun50i_h616.c +15
-4+ val =14 ; + val2 =8 ; + } }else { - val =13 ; - val2 =9 ; +if (para->type ==SUNXI_DRAM_TYPE_DDR3 ) { + val =13 ; + val2 =9 ; + }else if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) { + val =14 ; + val2 =8 ; + } }writel (val,SUNXI_DRAM_PHY0_BASE +0x14 );@@ -869,12 +915,20 @@ static bool mctl_phy_init(const struct dram_para *para,if (para->tpr10 &TPR10_CA_BIT_DELAY )mctl_phy_ca_bit_delay_compensation (para, config); -writel (0x80 ,SUNXI_DRAM_PHY0_BASE +0x3dc ); -writel (0x80 ,SUNXI_DRAM_PHY0_BASE +0x45c ); +if (para->type ==SUNXI_DRAM_TYPE_DDR3 ) + val =0x80 ; +else if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) + val =0xc0 ; +writel (val,SUNXI_DRAM_PHY0_BASE +0x3dc );arch/arm/mach-sunxi/dram_sun50i_h616.c static bool mctl_phy_init(const struct dram_para *para, · line 931
Quoted 10 lines
arch/arm/mach-sunxi/dram_sun50i_h616.c +6
-1+writel (val,SUNXI_DRAM_PHY0_BASE +0x45c );mctl_phy_configure_odt (para); -clrsetbits_le32 (SUNXI_DRAM_PHY0_BASE +4 ,7 ,0xa ); +if (para->type ==SUNXI_DRAM_TYPE_DDR3 ) { +clrsetbits_le32 (SUNXI_DRAM_PHY0_BASE +4 ,7 ,0xa ); + }else if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) { +clrsetbits_le32 (SUNXI_DRAM_PHY0_BASE +4 ,7 ,0xb ); + }To be consistent code style wise, above block could be rewritten to set val variable to either
0xaor0xband set block after that.Quoted 212 lines
arch/arm/mach-sunxi/dram_sun50i_h616.c +49
-20if (para->clk <=672 )writel (0xf ,SUNXI_DRAM_PHY0_BASE +0x20 );@@ -924,21 +978,39 @@ static bool mctl_phy_init(const struct dram_para *para, mr2 =0x20 ; } -writel (mr0, &mctl_ctl->mrctrl1); -writel (0x80000030 , &mctl_ctl->mrctrl0); -mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); - -writel (4 , &mctl_ctl->mrctrl1); -writel (0x80001030 , &mctl_ctl->mrctrl0); -mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); - -writel (mr2, &mctl_ctl->mrctrl1); -writel (0x80002030 , &mctl_ctl->mrctrl0); -mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); - -writel (0 , &mctl_ctl->mrctrl1); -writel (0x80003030 , &mctl_ctl->mrctrl0); -mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); +if (para->type ==SUNXI_DRAM_TYPE_DDR3 ) { +writel (mr0, &mctl_ctl->mrctrl1); +writel (0x80000030 , &mctl_ctl->mrctrl0); +mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); + +writel (4 , &mctl_ctl->mrctrl1); +writel (0x80001030 , &mctl_ctl->mrctrl0); +mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); + +writel (mr2, &mctl_ctl->mrctrl1); +writel (0x80002030 , &mctl_ctl->mrctrl0); +mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); + +writel (0 , &mctl_ctl->mrctrl1); +writel (0x80003030 , &mctl_ctl->mrctrl0); +mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); + }else if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) { +writel (mr0, &mctl_ctl->mrctrl1); +writel (0x800000f0 , &mctl_ctl->mrctrl0); +mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); + +writel (4 , &mctl_ctl->mrctrl1); +writel (0x800000f0 , &mctl_ctl->mrctrl0); +mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); + +writel (mr2, &mctl_ctl->mrctrl1); +writel (0x800000f0 , &mctl_ctl->mrctrl0); +mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); + +writel (0x301 , &mctl_ctl->mrctrl1); +writel (0x800000f0 , &mctl_ctl->mrctrl0); +mctl_await_completion (&mctl_ctl->mrctrl0,BIT (31 ),0 ); + }writel (0 ,SUNXI_DRAM_PHY0_BASE +0x54 );@@ -1014,7 +1086,10 @@ static bool mctl_ctrl_init(const struct dram_para *para,setbits_le32 (&mctl_com->unk_0x008,0xff00 ); reg_val =MSTR_BURST_LENGTH (8 ) |MSTR_ACTIVE_RANKS (config->ranks); - reg_val |=MSTR_DEVICETYPE_DDR3 |MSTR_2TMODE ; +if (para->type ==SUNXI_DRAM_TYPE_DDR3 ) + reg_val |=MSTR_DEVICETYPE_DDR3 |MSTR_2TMODE ; +else if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) + reg_val |=MSTR_DEVICETYPE_LPDDR3 ;if (config->bus_full_width) reg_val |=MSTR_BUSWIDTH_FULL ;else @@ -1026,10 +1101,14 @@ static bool mctl_ctrl_init(const struct dram_para *para,else writel (0x0201 , &mctl_ctl->odtmap); -writel (0x06000400 , &mctl_ctl->odtcfg); -writel (0x06000400 , &mctl_ctl->unk_0x2240); -writel (0x06000400 , &mctl_ctl->unk_0x3240); -writel (0x06000400 , &mctl_ctl->unk_0x4240); +if (para->type ==SUNXI_DRAM_TYPE_DDR3 ) + reg_val =0x06000400 ; +else if (para->type ==SUNXI_DRAM_TYPE_LPDDR3 ) + reg_val =0x09020400 ; +writel (reg_val, &mctl_ctl->odtcfg); +writel (reg_val, &mctl_ctl->unk_0x2240); +writel (reg_val, &mctl_ctl->unk_0x3240); +writel (reg_val, &mctl_ctl->unk_0x4240);writel (BIT (31 ), &mctl_com->cr);@@ -1163,7 +1242,11 @@ static unsigned long mctl_calc_size(const struct dram_config *config)static const struct dram_para para = { .clk =CONFIG_DRAM_CLK , +#ifdef CONFIG_SUNXI_DRAM_H616_DDR3_1333 .type =SUNXI_DRAM_TYPE_DDR3 , +#elif defined(CONFIG_SUNXI_DRAM_H616_LPDDR3) + .type =SUNXI_DRAM_TYPE_LPDDR3 , +#endif .dx_odt =CONFIG_DRAM_SUN50I_H616_DX_ODT , .dx_dri =CONFIG_DRAM_SUN50I_H616_DX_DRI , .ca_dri =CONFIG_DRAM_SUN50I_H616_CA_DRI ,arch/arm/mach-sunxi/dram_timings/Makefile +1
-0@@ -4,3 +4,4 @@ obj-$(CONFIG_SUNXI_DRAM_DDR2_V3S) += ddr2_v3s.o obj-$(CONFIG_SUNXI_DRAM_H6_LPDDR3) += h6_lpddr3.o obj-$(CONFIG_SUNXI_DRAM_H6_DDR3_1333) += h6_ddr3_1333.o obj-$(CONFIG_SUNXI_DRAM_H616_DDR3_1333) += h616_ddr3_1333.o +obj-$(CONFIG_SUNXI_DRAM_H616_LPDDR3) += h616_lpddr3.oarch/arm/mach-sunxi/dram_timings/h616_lpddr3.c new file +95
-0@@ -0,0 +1,95 @@ +/* +* sun50i H616 LPDDR3 timings, as programmed by Allwinner's boot0 +* +* The chips are probably able to be driven by a faster clock, but boot0 +* uses a more conservative timing (as usual). +* +* (C) Copyright 2020 Jernej Skrabec <[email protected]> +* Based on H6 DDR3 timings: +* (C) Copyright 2018,2019 Arm Ltd. +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#include <common.h> +#include <asm/arch/dram.h> +#include <asm/arch/cpu.h> + +void mctl_set_timing_params (const struct dram_para *para) +{ +struct sunxi_mctl_ctl_reg *const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE ; + +u8 tccd =2 ; +u8 tfaw =ns_to_t (50 ); +u8 trrd =max (ns_to_t (6 ),4 ); +u8 trcd =ns_to_t (24 ); +u8 trc =ns_to_t (70 ); +u8 txp =max (ns_to_t (8 ),3 ); +u8 trtp =max (ns_to_t (8 ),2 ); +u8 trp =ns_to_t (27 ); +u8 tras =ns_to_t (41 ); +u16 trefi =ns_to_t (7800 ) /64 ; +u16 trfc =ns_to_t (210 ); +u16 txsr =88 ; + +u8 tmrw =5 ; +u8 tmrd =5 ; +u8 tmod =max (ns_to_t (15 ),12 ); +u8 tcke =max (ns_to_t (6 ),3 ); +u8 tcksrx =max (ns_to_t (12 ),4 ); +u8 tcksre =max (ns_to_t (12 ),4 ); +u8 tckesr = tcke +2 ; +u8 trasmax = (para->clk /2 ) /16 ; +u8 txs =ns_to_t (360 ) /32 ; +u8 txsdll =16 ; +u8 txsabort =4 ; +u8 txsfast =4 ; +u8 tcl =7 ; +u8 tcwl =4 ; +u8 t_rdata_en =12 ; +u8 t_wr_lat =6 ; + +u8 twtp =16 ; +u8 twr2rd = trtp +9 ; +u8 trd2wr =13 ; + +/* DRAM timing grabbed from tvbox with LPDDR3 memory */ +writel ((twtp <<24 ) | (tfaw <<16 ) | (trasmax <<8 ) | tras, + &mctl_ctl->dramtmg[0 ]); +writel ((txp <<16 ) | (trtp <<8 ) | trc, &mctl_ctl->dramtmg[1 ]); +writel ((tcwl <<24 ) | (tcl <<16 ) | (trd2wr <<8 ) | twr2rd, + &mctl_ctl->dramtmg[2 ]); +writel ((tmrw <<20 ) | (tmrd <<12 ) | tmod, &mctl_ctl->dramtmg[3 ]); +writel ((trcd <<24 ) | (tccd <<16 ) | (trrd <<8 ) | trp, + &mctl_ctl->dramtmg[4 ]); +writel ((tcksrx <<24 ) | (tcksre <<16 ) | (tckesr <<8 ) | tcke, + &mctl_ctl->dramtmg[5 ]); +/* Value suggested by ZynqMP manual and used by libdram */ +writel ((txp +2 ) |0x02020000 , &mctl_ctl->dramtmg[6 ]); +writel ((txsfast <<24 ) | (txsabort <<16 ) | (txsdll <<8 ) | txs, + &mctl_ctl->dramtmg[8 ]); +writel (0x00020208 , &mctl_ctl->dramtmg[9 ]); +writel (0xE0C05 , &mctl_ctl->dramtmg[10 ]); +writel (0x440C021C , &mctl_ctl->dramtmg[11 ]); +writel (8 , &mctl_ctl->dramtmg[12 ]); +writel (0xA100002 , &mctl_ctl->dramtmg[13 ]); +writel (txsr, &mctl_ctl->dramtmg[14 ]); + +writel (0x4f0112 , &mctl_ctl->init[0 ]); +writel (0x420000 , &mctl_ctl->init[1 ]); +writel (0xd05 , &mctl_ctl->init[2 ]); +writel (0x83001c , &mctl_ctl->init[3 ]); +writel (0x00010000 , &mctl_ctl->init[4 ]); + +writel (0 , &mctl_ctl->dfimisc); +clrsetbits_le32 (&mctl_ctl->rankctl,0xff0 ,0x660 ); + +/* Configure DFI timing */ +writel (t_wr_lat |0x2000000 | (t_rdata_en <<16 ) |0x808000 , + &mctl_ctl->dfitmg0); +writel (0x100202 , &mctl_ctl->dfitmg1); + +/* set refresh timing */ +writel ((trefi <<16 ) | trfc, &mctl_ctl->rfshtmg); +}