net/iavf: fix abnormal disable HW interrupt
PATCH 1/1 net/iavf: fix abnormal disable HW interrupt
For command VIRTCHNL_OP_REQUEST_QUEUES, polling access to the admin queue has the issue of access overruns after disabling interrupt. That results in FW disabling HW interrupt for protection purposes.
This patch fixes the issue by removing the polling admin queue processing and replacing it with a generic interrupt processing.
Fixes 22b123a36d07 ("net/avf: initialize PMD")
Fixes ef807926e148 ("net/iavf: support requesting additional queues from PF")
Fixes 84108425054a ("net/iavf: support asynchronous virtual channel message")
Signed-off-by Mingjin Ye <[email protected]>
--- drivers/net/iavf/iavf_vchnl.c | 48 ++++++++--------------------------- 1 file changed, 10 insertions(+), 38 deletions(-)
drivers/net/iavf/iavf_vchnl.c +10 -38
@@ -323,6 +323,7 @@ iavf_execute_vf_cmd(struct iavf_adapter *adapter, struct iavf_cmd_info *args,switch (args->ops) {case VIRTCHNL_OP_RESET_VF : +case VIRTCHNL_OP_REQUEST_QUEUES :/*no need to wait for response */ _clear_cmd (vf);break ;
@@ -346,33 +347,6 @@ iavf_execute_vf_cmd(struct iavf_adapter *adapter, struct iavf_cmd_info *args, }_clear_cmd (vf);break ; -case VIRTCHNL_OP_REQUEST_QUEUES : -/* -* ignore async reply, only wait for system message, -* vf_reset = true if get VIRTCHNL_EVENT_RESET_IMPENDING, -* if not, means request queues failed. -*/ -do { - result =iavf_read_msg_from_pf (adapter, args->out_size, - args->out_buffer); -if (result ==IAVF_MSG_SYS && vf->vf_reset) { -break ; - }else if (result ==IAVF_MSG_CMD || - result ==IAVF_MSG_ERR ) { - err =-1 ; -break ; - } -iavf_msec_delay (ASQ_DELAY_MS ); -/* If don't read msg or read sys event, continue */ - }while (i++ <MAX_TRY_TIMES ); -if (i >=MAX_TRY_TIMES || - vf->cmd_retval !=VIRTCHNL_STATUS_SUCCESS ) { - err =-1 ; -PMD_DRV_LOG (ERR ,"No response or return failure (%d)" -" for cmd %d" , vf->cmd_retval, args->ops); - } -_clear_cmd (vf); -break ;default :/* For other virtchnl ops in running time, * wait for the cmd done flag.
@@ -2055,11 +2029,11 @@ iavf_request_queues(struct rte_eth_dev *dev, uint16_t num)struct iavf_adapter *adapter =IAVF_DEV_PRIVATE_TO_ADAPTER (dev->data->dev_private);struct iavf_info *vf =IAVF_DEV_PRIVATE_TO_VF (adapter); -struct rte_pci_device *pci_dev =RTE_ETH_DEV_TO_PCI (dev);struct virtchnl_vf_res_request vfres;struct iavf_cmd_info args;uint16_t num_queue_pairs;int err; +int i =0 ;if (!(vf->vf_res->vf_cap_flags &VIRTCHNL_VF_OFFLOAD_REQ_QUEUES )) {
@@ -2080,16 +2054,7 @@ iavf_request_queues(struct rte_eth_dev *dev, uint16_t num) args.out_size =IAVF_AQ_BUF_SZ ;if (vf->vf_res->vf_cap_flags &VIRTCHNL_VF_OFFLOAD_WB_ON_ITR ) { -/* disable interrupt to avoid the admin queue message to be read -* before iavf_read_msg_from_pf. -* -* don't disable interrupt handler until ready to execute vf cmd. -*/ -rte_spinlock_lock (&vf->aq_lock); -rte_intr_disable (pci_dev->intr_handle); - err =iavf_execute_vf_cmd (adapter, &args,0 ); -rte_intr_enable (pci_dev->intr_handle); -rte_spinlock_unlock (&vf->aq_lock); + err =iavf_execute_vf_cmd_safe (adapter, &args,0 ); }else {rte_eal_alarm_cancel (iavf_dev_alarm_handler, dev); err =iavf_execute_vf_cmd_safe (adapter, &args,0 );
@@ -2102,6 +2067,13 @@ iavf_request_queues(struct rte_eth_dev *dev, uint16_t num)return err; } +/* wait for interrupt notification vf is resetting */ +while (i++ <MAX_TRY_TIMES ) { +if (vf->vf_reset) +break ; +iavf_msec_delay (ASQ_DELAY_MS ); + } +/* request queues succeeded, vf is resetting */ if (vf->vf_reset) {PMD_DRV_LOG (INFO ,"vf is resetting" );
Signature · 1 line
2.25.1