6.1.33-rc1 review

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/infiniband/hw/bnxt_re/qplib_res.c | 12 ++----------
 drivers/infiniband/hw/bnxt_re/qplib_sp.c  |  7 +++----
 2 files changed, 5 insertions(+), 14 deletions(-)

drivers/infiniband/hw/bnxt_re/qplib_res.c +2 ~~-10~~

index 126d4f26f75ad..81b0c5e879f9e 100644
@@ -215,17 +215,9 @@ int bnxt_qplib_alloc_init_hwq(struct bnxt_qplib_hwq *hwq,
 			return -EINVAL;
 		hwq_attr->sginfo->npages = npages;
 	} else {
-		unsigned long sginfo_num_pages = ib_umem_num_dma_blocks(
-			hwq_attr->sginfo->umem, hwq_attr->sginfo->pgsize);
-
+		npages = ib_umem_num_dma_blocks(hwq_attr->sginfo->umem,
+						hwq_attr->sginfo->pgsize);
 		hwq->is_user = true;
-		npages = sginfo_num_pages;
-		npages = (npages * PAGE_SIZE) /
-			  BIT_ULL(hwq_attr->sginfo->pgshft);
-		if ((sginfo_num_pages * PAGE_SIZE) %
-		     BIT_ULL(hwq_attr->sginfo->pgshft))
-			if (!npages)
-				npages++;
 	}
 
 	if (npages == MAX_PBL_LVL_0_PGS && !hwq_attr->sginfo->nopte) {

drivers/infiniband/hw/bnxt_re/qplib_sp.c +3 -4

index b802981b71716..bae7d89261439 100644
@@ -584,16 +584,15 @@ int bnxt_qplib_reg_mr(struct bnxt_qplib_res *res, struct bnxt_qplib_mrw *mr,
 		/* Free the hwq if it already exist, must be a rereg */
 		if (mr->hwq.max_elements)
 			bnxt_qplib_free_hwq(res, &mr->hwq);
-		/* Use system PAGE_SIZE */
 		hwq_attr.res = res;
 		hwq_attr.depth = pages;
-		hwq_attr.stride = buf_pg_size;
+		hwq_attr.stride = sizeof(dma_addr_t);
 		hwq_attr.type = HWQ_TYPE_MR;
 		hwq_attr.sginfo = &sginfo;
 		hwq_attr.sginfo->umem = umem;
 		hwq_attr.sginfo->npages = pages;
-		hwq_attr.sginfo->pgsize = PAGE_SIZE;
-		hwq_attr.sginfo->pgshft = PAGE_SHIFT;
+		hwq_attr.sginfo->pgsize = buf_pg_size;
+		hwq_attr.sginfo->pgshft = ilog2(buf_pg_size);
 		rc = bnxt_qplib_alloc_init_hwq(&mr->hwq, &hwq_attr);
 		if (rc) {
 			dev_err(&res->pdev->dev,

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:37 UTC #2 lore raw

PATCH 2/225 phy: amlogic: phy-meson-g12a-mipi-dphy-analog: fix CNTL2_DIF_TX_CTL0 value

Link https://lore.kernel.org/r/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v4-10-2592c29ea263@linaro.org open here

From: Neil Armstrong <[email protected]>

[ Upstream commit b949193011540bb17cf1da7795ec42af1b875203 ]

Use the same CNTL2_DIF_TX_CTL0 value used by the vendor, it was reported fixing timings issues.

Fixes 2a56dc650e54 ("phy: amlogic: Add G12A Analog MIPI D-PHY driver")

Signed-off-by Neil Armstrong <[email protected]>

Signed-off-by Vinod Koul <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c +1 -1

index c14089fa7db49..cabdddbbabfd7 100644
@@ -70,7 +70,7 @@ static int phy_g12a_mipi_dphy_analog_power_on(struct phy *phy)
 		     HHI_MIPI_CNTL1_BANDGAP);
 
 	regmap_write(priv->regmap, HHI_MIPI_CNTL2,
-		     FIELD_PREP(HHI_MIPI_CNTL2_DIF_TX_CTL0, 0x459) |
+		     FIELD_PREP(HHI_MIPI_CNTL2_DIF_TX_CTL0, 0x45a) |
 		     FIELD_PREP(HHI_MIPI_CNTL2_DIF_TX_CTL1, 0x2680));
 
 	reg = DSI_LANE_CLK;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:37 UTC #3 lore raw

PATCH 3/225 RDMA/efa: Fix unsupported page sizes in device

From: Yonatan Nachum <[email protected]>

[ Upstream commit 866422cdddcdf59d8c68e9472d49ba1be29b5fcf ]

Device uses 4KB size blocks for user pages indirect list while the driver creates those blocks with the size of PAGE_SIZE of the kernel. On kernels with PAGE_SIZE different than 4KB (ARM RHEL), this leads to a failure on register MR with indirect list because of the miss communication between driver and device.

Fixes 40909f664d27 ("RDMA/efa: Add EFA verbs implementation")

Link https://lore.kernel.org/r/[email protected] open here

Reviewed-by Firas Jahjah <[email protected]>

Reviewed-by Michael Margolin <[email protected]>

Signed-off-by Yonatan Nachum <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/infiniband/hw/efa/efa_verbs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/infiniband/hw/efa/efa_verbs.c +1 -1

index 31454643f8c54..f9526a4c75b26 100644
@@ -1397,7 +1397,7 @@ static int pbl_continuous_initialize(struct efa_dev *dev,
  */
 static int pbl_indirect_initialize(struct efa_dev *dev, struct pbl_context *pbl)
 {
-	u32 size_in_pages = DIV_ROUND_UP(pbl->pbl_buf_size_in_bytes, PAGE_SIZE);
+	u32 size_in_pages = DIV_ROUND_UP(pbl->pbl_buf_size_in_bytes, EFA_CHUNK_PAYLOAD_SIZE);
 	struct scatterlist *sgl;
 	int sg_dma_cnt, err;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:37 UTC #4 lore raw

PATCH 4/225 RDMA/hns: Fix timeout attr in query qp for HIP08

From: Chengchang Tang <[email protected]>

[ Upstream commit 58caa2a51ad4fd21763696cc6c4defc9fc1b4b4f ]

On HIP08, the queried timeout attr is different from the timeout attr configured by the user.

It is found by rdma-core testcase test_rdmacm_async_traffic:

======================================================================
FAIL: test_rdmacm_async_traffic (tests.test_rdmacm.CMTestCase)
----------------------------------------------------------------------
Traceback (most recent call last):
File "./tests/test_rdmacm.py", line 33, in test_rdmacm_async_traffic
self.two_nodes_rdmacm_traffic(CMAsyncConnection, self.rdmacm_traffic,
File "./tests/base.py", line 382, in two_nodes_rdmacm_traffic
raise(res)
AssertionError

Fixes 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Chengchang Tang <[email protected]>

Signed-off-by Junxian Huang <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 17 ++++++++++++++---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.h |  2 ++
 2 files changed, 16 insertions(+), 3 deletions(-)

drivers/infiniband/hw/hns/hns_roce_hw_v2.c +14 -3

index b2421883993b1..7a5bfe6a9115f 100644
@@ -5136,7 +5136,6 @@ static int hns_roce_v2_set_abs_fields(struct ib_qp *ibqp,
 static bool check_qp_timeout_cfg_range(struct hns_roce_dev *hr_dev, u8 *timeout)
 {
 #define QP_ACK_TIMEOUT_MAX_HIP08 20
-#define QP_ACK_TIMEOUT_OFFSET 10
 #define QP_ACK_TIMEOUT_MAX 31
 
 	if (hr_dev->pci_dev->revision == PCI_REVISION_ID_HIP08) {

@@ -5145,7 +5144,7 @@ static bool check_qp_timeout_cfg_range(struct hns_roce_dev *hr_dev, u8 *timeout)
 				   "local ACK timeout shall be 0 to 20.\n");
 			return false;
 		}
-		*timeout += QP_ACK_TIMEOUT_OFFSET;
+		*timeout += HNS_ROCE_V2_QP_ACK_TIMEOUT_OFS_HIP08;
 	} else if (hr_dev->pci_dev->revision > PCI_REVISION_ID_HIP08) {
 		if (*timeout > QP_ACK_TIMEOUT_MAX) {
 			ibdev_warn(&hr_dev->ib_dev,

@@ -5431,6 +5430,18 @@ static int hns_roce_v2_query_qpc(struct hns_roce_dev *hr_dev, u32 qpn,
 	return ret;
 }
 
+static u8 get_qp_timeout_attr(struct hns_roce_dev *hr_dev,
+			      struct hns_roce_v2_qp_context *context)
+{
+	u8 timeout;
+
+	timeout = (u8)hr_reg_read(context, QPC_AT);
+	if (hr_dev->pci_dev->revision == PCI_REVISION_ID_HIP08)
+		timeout -= HNS_ROCE_V2_QP_ACK_TIMEOUT_OFS_HIP08;
+
+	return timeout;
+}
+
 static int hns_roce_v2_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *qp_attr,
 				int qp_attr_mask,
 				struct ib_qp_init_attr *qp_init_attr)

@@ -5508,7 +5519,7 @@ static int hns_roce_v2_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *qp_attr,
 	qp_attr->max_dest_rd_atomic = 1 << hr_reg_read(&context, QPC_RR_MAX);
 
 	qp_attr->min_rnr_timer = (u8)hr_reg_read(&context, QPC_MIN_RNR_TIME);
-	qp_attr->timeout = (u8)hr_reg_read(&context, QPC_AT);
+	qp_attr->timeout = get_qp_timeout_attr(hr_dev, &context);
 	qp_attr->retry_cnt = hr_reg_read(&context, QPC_RETRY_NUM_INIT);
 	qp_attr->rnr_retry = hr_reg_read(&context, QPC_RNR_NUM_INIT);

drivers/infiniband/hw/hns/hns_roce_hw_v2.h +2 -0

index b1b3e1e0b84e5..2b4dbbb06eb56 100644
@@ -72,6 +72,8 @@
 #define HNS_ROCE_V2_IDX_ENTRY_SZ		4
 
 #define HNS_ROCE_V2_SCCC_SZ			32
+#define HNS_ROCE_V2_QP_ACK_TIMEOUT_OFS_HIP08    10
+
 #define HNS_ROCE_V3_SCCC_SZ			64
 #define HNS_ROCE_V3_GMV_ENTRY_SZ		32

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:37 UTC #5 lore raw

PATCH 5/225 RDMA/hns: Fix base address table allocation

From: Chengchang Tang <[email protected]>

[ Upstream commit 7f3969b14f356dd65fa95b3528eb05c32e68bc06 ]

For hns, the specification of an entry like resource (E.g. WQE/CQE/EQE) depends on BT page size, buf page size and hopnum. For user mode, the buf page size depends on UMEM. Therefore, the actual specification is controlled by BT page size and hopnum.

The current BT page size and hopnum are obtained from firmware. This makes the driver inflexible and introduces unnecessary constraints. Resource allocation failures occur in many scenarios.

This patch will calculate whether the BT page size set by firmware is sufficient before allocating BT, and increase the BT page size if it is insufficient.

Fixes 1133401412a9 ("RDMA/hns: Optimize base address table config flow for qp buffer")

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Chengchang Tang <[email protected]>

Signed-off-by Junxian Huang <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/infiniband/hw/hns/hns_roce_mr.c | 43 +++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

drivers/infiniband/hw/hns/hns_roce_mr.c +43 -0

index 37a5cf62f88b4..14376490ac226 100644
@@ -33,6 +33,7 @@
 
 #include <linux/vmalloc.h>
 #include <rdma/ib_umem.h>
+#include <linux/math.h>
 #include "hns_roce_device.h"
 #include "hns_roce_cmd.h"
 #include "hns_roce_hem.h"

@@ -909,6 +910,44 @@ static int mtr_init_buf_cfg(struct hns_roce_dev *hr_dev,
 	return page_cnt;
 }
 
+static u64 cal_pages_per_l1ba(unsigned int ba_per_bt, unsigned int hopnum)
+{
+	return int_pow(ba_per_bt, hopnum - 1);
+}
+
+static unsigned int cal_best_bt_pg_sz(struct hns_roce_dev *hr_dev,
+				      struct hns_roce_mtr *mtr,
+				      unsigned int pg_shift)
+{
+	unsigned long cap = hr_dev->caps.page_size_cap;
+	struct hns_roce_buf_region *re;
+	unsigned int pgs_per_l1ba;
+	unsigned int ba_per_bt;
+	unsigned int ba_num;
+	int i;
+
+	for_each_set_bit_from(pg_shift, &cap, sizeof(cap) * BITS_PER_BYTE) {
+		if (!(BIT(pg_shift) & cap))
+			continue;
+
+		ba_per_bt = BIT(pg_shift) / BA_BYTE_LEN;
+		ba_num = 0;
+		for (i = 0; i < mtr->hem_cfg.region_count; i++) {
+			re = &mtr->hem_cfg.region[i];
+			if (re->hopnum == 0)
+				continue;
+
+			pgs_per_l1ba = cal_pages_per_l1ba(ba_per_bt, re->hopnum);
+			ba_num += DIV_ROUND_UP(re->count, pgs_per_l1ba);
+		}
+
+		if (ba_num <= ba_per_bt)
+			return pg_shift;
+	}
+
+	return 0;
+}
+
 static int mtr_alloc_mtt(struct hns_roce_dev *hr_dev, struct hns_roce_mtr *mtr,
 			 unsigned int ba_page_shift)
 {

@@ -917,6 +956,10 @@ static int mtr_alloc_mtt(struct hns_roce_dev *hr_dev, struct hns_roce_mtr *mtr,
 
 	hns_roce_hem_list_init(&mtr->hem_list);
 	if (!cfg->is_direct) {
+		ba_page_shift = cal_best_bt_pg_sz(hr_dev, mtr, ba_page_shift);
+		if (!ba_page_shift)
+			return -ERANGE;
+
 		ret = hns_roce_hem_list_request(hr_dev, &mtr->hem_list,
 						cfg->region, cfg->region_count,
 						ba_page_shift);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #6 lore raw

PATCH 6/225 RDMA/hns: Modify the value of long message loopback slice

From: Yangyang Li <[email protected]>

[ Upstream commit 56518a603fd2bf74762d176ac980572db84a3e14 ]

Long message loopback slice is used for achieving traffic balance between QPs. It prevents the problem that QPs with large traffic occupying the hardware pipeline for a long time and QPs with small traffic cannot be scheduled.

Currently, its maximum value is set to 16K, which means only after a QP sends 16K will the second QP be scheduled. This value is too large, which will lead to unbalanced traffic scheduling, and thus it needs to be modified.

The setting range of the long message loopback slice is modified to be from 1024 (the lower limit supported by hardware) to mtu. Actual testing shows that this value can significantly reduce error in hardware traffic scheduling.

This solution is compatible with both HIP08 and HIP09. The modified lp_pktn_ini has a maximum value of 2 (when mtu is 256), so the range checking code for lp_pktn_ini is no longer necessary and needs to be deleted.

Fixes 0e60778efb07 ("RDMA/hns: Modify the value of MAX_LP_MSG_LEN to meet hardware compatibility")

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Yangyang Li <[email protected]>

Signed-off-by Junxian Huang <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

drivers/infiniband/hw/hns/hns_roce_hw_v2.c +3 -5

index 7a5bfe6a9115f..34a270b6891a9 100644
@@ -4728,11 +4728,9 @@ static int modify_qp_init_to_rtr(struct ib_qp *ibqp,
 	mtu = ib_mtu_enum_to_int(ib_mtu);
 	if (WARN_ON(mtu <= 0))
 		return -EINVAL;
-#define MAX_LP_MSG_LEN 16384
-	/* MTU * (2 ^ LP_PKTN_INI) shouldn't be bigger than 16KB */
-	lp_pktn_ini = ilog2(MAX_LP_MSG_LEN / mtu);
-	if (WARN_ON(lp_pktn_ini >= 0xF))
-		return -EINVAL;
+#define MIN_LP_MSG_LEN 1024
+	/* mtu * (2 ^ lp_pktn_ini) should be in the range of 1024 to mtu */
+	lp_pktn_ini = ilog2(max(mtu, MIN_LP_MSG_LEN) / mtu);
 
 	if (attr_mask & IB_QP_PATH_MTU) {
 		hr_reg_write(context, QPC_MTU, ib_mtu);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #7 lore raw

PATCH 7/225 dmaengine: at_xdmac: fix potential Oops in at_xdmac_prep_interleaved()

From: Dan Carpenter <[email protected]>

[ Upstream commit 4d43acb145c363626d76f49febb4240c488cd1cf ]

There are two place if the at_xdmac_interleaved_queue_desc() fails which could lead to a NULL dereference where "first" is NULL and we call list_add_tail(&first->desc_node, ...). In the first caller, the return is not checked so add a check for that. In the next caller, the return is checked but if it fails on the first iteration through the loop then it will lead to a NULL pointer dereference.

Fixes 4e5385784e69 ("dmaengine: at_xdmac: handle numf > 1")

Fixes 62b5cb757f1d ("dmaengine: at_xdmac: fix memory leak in interleaved mode")

Signed-off-by Dan Carpenter <[email protected]>

Reviewed-by Tudor Ambarus <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Vinod Koul <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/dma/at_xdmac.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

drivers/dma/at_xdmac.c +5 -2

index bfc8ae2143957..7919906b02e74 100644
@@ -1026,6 +1026,8 @@ at_xdmac_prep_interleaved(struct dma_chan *chan,
 							NULL,
 							src_addr, dst_addr,
 							xt, xt->sgl);
+		if (!first)
+			return NULL;
 
 		/* Length of the block is (BLEN+1) microblocks. */
 		for (i = 0; i < xt->numf - 1; i++)

@@ -1056,8 +1058,9 @@ at_xdmac_prep_interleaved(struct dma_chan *chan,
 							       src_addr, dst_addr,
 							       xt, chunk);
 			if (!desc) {
-				list_splice_tail_init(&first->descs_list,
-						      &atchan->free_descs_list);
+				if (first)
+					list_splice_tail_init(&first->descs_list,
+							      &atchan->free_descs_list);
 				return NULL;
 			}

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #8 lore raw

PATCH 8/225 RDMA/bnxt_re: Fix a possible memory leak

From: Kalesh AP <[email protected]>

[ Upstream commit 349e3c0cf239cc01d58a1e6c749e171de014cd6a ]

Inside bnxt_qplib_create_cq(), when the check for NULL DPI fails, driver returns directly without freeing the memory allocated inside bnxt_qplib_alloc_init_hwq() routine.

Fixed this by moving the check for NULL DPI before invoking bnxt_qplib_alloc_init_hwq().

Fixes 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")

Link https://lore.kernel.org/r/[email protected] open here

Reviewed-by Kashyap Desai <[email protected]>

Signed-off-by Kalesh AP <[email protected]>

Signed-off-by Selvin Xavier <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/infiniband/hw/bnxt_re/qplib_fp.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

drivers/infiniband/hw/bnxt_re/qplib_fp.c +6 -5

index 96e581ced50e2..ab2cc1c67f70b 100644
@@ -2043,6 +2043,12 @@ int bnxt_qplib_create_cq(struct bnxt_qplib_res *res, struct bnxt_qplib_cq *cq)
 	u32 pg_sz_lvl;
 	int rc;
 
+	if (!cq->dpi) {
+		dev_err(&rcfw->pdev->dev,
+			"FP: CREATE_CQ failed due to NULL DPI\n");
+		return -EINVAL;
+	}
+
 	hwq_attr.res = res;
 	hwq_attr.depth = cq->max_wqe;
 	hwq_attr.stride = sizeof(struct cq_base);

@@ -2054,11 +2060,6 @@ int bnxt_qplib_create_cq(struct bnxt_qplib_res *res, struct bnxt_qplib_cq *cq)
 
 	RCFW_CMD_PREP(req, CREATE_CQ, cmd_flags);
 
-	if (!cq->dpi) {
-		dev_err(&rcfw->pdev->dev,
-			"FP: CREATE_CQ failed due to NULL DPI\n");
-		return -EINVAL;
-	}
 	req.dpi = cpu_to_le32(cq->dpi->dpi);
 	req.cq_handle = cpu_to_le64(cq->cq_handle);
 	req.cq_size = cpu_to_le32(cq->hwq.max_elements);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #9 lore raw

PATCH 9/225 RDMA/bnxt_re: Fix return value of bnxt_re_process_raw_qp_pkt_rx

From: Kalesh AP <[email protected]>

[ Upstream commit 0fa0d520e2a878cb4c94c4dc84395905d3f14f54 ]

bnxt_re_process_raw_qp_pkt_rx() always return 0 and ignores the return value of bnxt_re_post_send_shadow_qp().

Fixes 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")

Link https://lore.kernel.org/r/[email protected] open here

Reviewed-by Hongguang Gao <[email protected]>

Reviewed-by Ajit Khaparde <[email protected]>

Signed-off-by Kalesh AP <[email protected]>

Signed-off-by Selvin Xavier <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/infiniband/hw/bnxt_re/ib_verbs.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

drivers/infiniband/hw/bnxt_re/ib_verbs.c +1 -3

index 989edc7896338..94222de1d3719 100644
@@ -3241,9 +3241,7 @@ static int bnxt_re_process_raw_qp_pkt_rx(struct bnxt_re_qp *gsi_qp,
 	udwr.remote_qkey = gsi_sqp->qplib_qp.qkey;
 
 	/* post data received  in the send queue */
-	rc = bnxt_re_post_send_shadow_qp(rdev, gsi_sqp, swr);
-
-	return 0;
+	return bnxt_re_post_send_shadow_qp(rdev, gsi_sqp, swr);
 }
 
 static void bnxt_re_process_res_rawqp1_wc(struct ib_wc *wc,

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:37 UTC #10 lore raw

PATCH 10/225 iommu/rockchip: Fix unwind goto issue

From: Chao Wang <[email protected]>

[ Upstream commit ec014683c564fb74fc68e8f5e84691d3b3839d24 ]

Smatch complains that
drivers/iommu/rockchip-iommu.c:1306 rk_iommu_probe() warn: missing unwind goto?

The rk_iommu_probe function, after obtaining the irq value through platform_get_irq, directly returns an error if the returned value is negative, without releasing any resources.

Fix this by adding a new error handling label "err_pm_disable" and use a goto statement to redirect to the error handling process. In order to preserve the original semantics, set err to the value of irq.

Fixes 1aa55ca9b14a ("iommu/rockchip: Move irq request past pm_runtime_enable")

Signed-off-by Chao Wang <[email protected]>

Reviewed-by Dongliang Mu <[email protected]>

Reviewed-by Heiko Stuebner <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/iommu/rockchip-iommu.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

drivers/iommu/rockchip-iommu.c +8 -6

index a68eadd64f38d..f7e9b56be174f 100644
@@ -1303,20 +1303,22 @@ static int rk_iommu_probe(struct platform_device *pdev)
 	for (i = 0; i < iommu->num_irq; i++) {
 		int irq = platform_get_irq(pdev, i);
 
-		if (irq < 0)
-			return irq;
+		if (irq < 0) {
+			err = irq;
+			goto err_pm_disable;
+		}
 
 		err = devm_request_irq(iommu->dev, irq, rk_iommu_irq,
 				       IRQF_SHARED, dev_name(dev), iommu);
-		if (err) {
-			pm_runtime_disable(dev);
-			goto err_remove_sysfs;
-		}
+		if (err)
+			goto err_pm_disable;
 	}
 
 	dma_set_mask_and_coherent(dev, rk_ops->dma_bit_mask);
 
 	return 0;
+err_pm_disable:
+	pm_runtime_disable(dev);
 err_remove_sysfs:
 	iommu_device_sysfs_remove(&iommu->iommu);
 err_put_group:

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:37 UTC #11 lore raw

PATCH 11/225 iommu/amd: Dont block updates to GATag if guest mode is on

From: Joao Martins <[email protected]>

[ Upstream commit ed8a2f4ddef2eaaf864ab1efbbca9788187036ab ]

On KVM GSI routing table updates, specially those where they have vIOMMUs with interrupt remapping enabled (to boot >255vcpus setups without relying on KVM_FEATURE_MSI_EXT_DEST_ID), a VMM may update the backing VF MSIs with a new VCPU affinity.

On AMD with AVIC enabled, the new vcpu affinity info is updated via:
avic_pi_update_irte()
irq_set_vcpu_affinity()
amd_ir_set_vcpu_affinity()
amd_iommu_{de}activate_guest_mode()

Where the IRTE[GATag] is updated with the new vcpu affinity. The GATag contains VM ID and VCPU ID, and is used by IOMMU hardware to signal KVM (via GALog) when interrupt cannot be delivered due to vCPU is in blocking state.

The issue is that amd_iommu_activate_guest_mode() will essentially only change IRTE fields on transitions from non-guest-mode to guest-mode and otherwise returns *with no changes to IRTE* on already configured guest-mode interrupts. To the guest this means that the VF interrupts remain affined to the first vCPU they were first configured, and guest will be unable to issue VF interrupts and receive messages like this from spurious interrupts (e.g. from waking the wrong vCPU in GALog):

[  167.759472] __common_interrupt: 3.34 No irq handler for vector
[  230.680927] mlx5_core 0000:00:02.0: mlx5_cmd_eq_recover:247:(pid
3122): Recovered 1 EQEs on cmd_eq
[  230.681799] mlx5_core 0000:00:02.0:
wait_func_handle_exec_timeout:1113:(pid 3122): cmd[0]: CREATE_CQ(0x400)
recovered after timeout
[  230.683266] __common_interrupt: 3.34 No irq handler for vector

Given the fact that amd_ir_set_vcpu_affinity() uses amd_iommu_activate_guest_mode() underneath it essentially means that VCPU affinity changes of IRTEs are nops. Fix it by dropping the check for guest-mode at amd_iommu_activate_guest_mode(). Same thing is applicable to amd_iommu_deactivate_guest_mode() although, even if the IRTE doesn't change underlying DestID on the host, the VFIO IRQ handler will still be able to poke at the right guest-vCPU.

Fixes b9c6ff94e43a ("iommu/amd: Re-factor guest virtual APIC (de-)activation code")

Signed-off-by Joao Martins <[email protected]>

Reviewed-by Suravee Suthikulpanit <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/iommu/amd/iommu.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

drivers/iommu/amd/iommu.c +1 -2

index 26fb78003889f..0ccc6b8319fba 100644
@@ -3504,8 +3504,7 @@ int amd_iommu_activate_guest_mode(void *data)
 	struct irte_ga *entry = (struct irte_ga *) ir_data->entry;
 	u64 valid;
 
-	if (!AMD_IOMMU_GUEST_IR_VAPIC(amd_iommu_guest_ir) ||
-	    !entry || entry->lo.fields_vapic.guest_mode)
+	if (!AMD_IOMMU_GUEST_IR_VAPIC(amd_iommu_guest_ir) || !entry)
 		return 0;
 
 	valid = entry->lo.fields_vapic.valid;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:37 UTC #12 lore raw

PATCH 12/225 iommu/amd: Handle GALog overflows

From: Joao Martins <[email protected]>

[ Upstream commit af47b0a24058e56e983881993752f88288ca6511 ]

GALog exists to propagate interrupts into all vCPUs in the system when interrupts are marked as non running (e.g. when vCPUs aren't running). A GALog overflow happens when there's in no space in the log to record the GATag of the interrupt. So when the GALOverflow condition happens, the GALog queue is processed and the GALog is restarted, as the IOMMU manual indicates in section "2.7.4 Guest Virtual APIC Log Restart Procedure":

| * Wait until MMIO Offset 2020h[GALogRun]=0b so that all request
|   entries are completed as circumstances allow. GALogRun must be 0b to
|   modify the guest virtual APIC log registers safely.
| * Write MMIO Offset 0018h[GALogEn]=0b.
| * As necessary, change the following values (e.g., to relocate or
| resize the guest virtual APIC event log):
|   - the Guest Virtual APIC Log Base Address Register
|      [MMIO Offset 00E0h],
|   - the Guest Virtual APIC Log Head Pointer Register
|      [MMIO Offset 2040h][GALogHead], and
|   - the Guest Virtual APIC Log Tail Pointer Register
|      [MMIO Offset 2048h][GALogTail].
| * Write MMIO Offset 2020h[GALOverflow] = 1b to clear the bit (W1C).
| * Write MMIO Offset 0018h[GALogEn] = 1b, and either set
|   MMIO Offset 0018h[GAIntEn] to enable the GA log interrupt or clear
|   the bit to disable it.

Failing to handle the GALog overflow means that none of the VFs (in any guest) will work with IOMMU AVIC forcing the user to power cycle the host. When handling the event it resumes the GALog without resizing much like how it is done in the event handler overflow. The [MMIO Offset 2020h][GALOverflow] bit might be set in status register without the [MMIO Offset 2020h][GAInt] bit, so when deciding to poll for GA events (to clear space in the galog), also check the overflow bit.

[suravee: Check for GAOverflow without GAInt, toggle CONTROL_GAINT_EN]

Co-developed-by Suravee Suthikulpanit <[email protected]>

Signed-off-by Suravee Suthikulpanit <[email protected]>

Signed-off-by Joao Martins <[email protected]>

Reviewed-by Vasant Hegde <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Stable-dep-of: 8ec4e2befef1 ("iommu/amd: Fix up merge conflict resolution")

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/iommu/amd/amd_iommu.h |  1 +
 drivers/iommu/amd/init.c      | 24 ++++++++++++++++++++++++
 drivers/iommu/amd/iommu.c     |  9 ++++++++-
 3 files changed, 33 insertions(+), 1 deletion(-)

drivers/iommu/amd/amd_iommu.h +1 -0

index c160a332ce339..24c7e6c6c0de9 100644
@@ -15,6 +15,7 @@ extern irqreturn_t amd_iommu_int_thread(int irq, void *data);
 extern irqreturn_t amd_iommu_int_handler(int irq, void *data);
 extern void amd_iommu_apply_erratum_63(struct amd_iommu *iommu, u16 devid);
 extern void amd_iommu_restart_event_logging(struct amd_iommu *iommu);
+extern void amd_iommu_restart_ga_log(struct amd_iommu *iommu);
 extern int amd_iommu_init_devices(void);
 extern void amd_iommu_uninit_devices(void);
 extern void amd_iommu_init_notifier(void);

drivers/iommu/amd/init.c +24 -0

index 7c14b1d32c8db..b0af8b5967e0d 100644
@@ -751,6 +751,30 @@ void amd_iommu_restart_event_logging(struct amd_iommu *iommu)
 	iommu_feature_enable(iommu, CONTROL_EVT_LOG_EN);
 }
 
+/*
+ * This function restarts event logging in case the IOMMU experienced
+ * an GA log overflow.
+ */
+void amd_iommu_restart_ga_log(struct amd_iommu *iommu)
+{
+	u32 status;
+
+	status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET);
+	if (status & MMIO_STATUS_GALOG_RUN_MASK)
+		return;
+
+	pr_info_ratelimited("IOMMU GA Log restarting\n");
+
+	iommu_feature_disable(iommu, CONTROL_GALOG_EN);
+	iommu_feature_disable(iommu, CONTROL_GAINT_EN);
+
+	writel(MMIO_STATUS_GALOG_OVERFLOW_MASK,
+	       iommu->mmio_base + MMIO_STATUS_OFFSET);
+
+	iommu_feature_enable(iommu, CONTROL_GAINT_EN);
+	iommu_feature_enable(iommu, CONTROL_GALOG_EN);
+}
+
 /*
  * This function resets the command buffer if the IOMMU stopped fetching
  * commands from it.

drivers/iommu/amd/iommu.c +8 -1

index 0ccc6b8319fba..16c5d1b97b564 100644
@@ -836,6 +836,7 @@ amd_iommu_set_pci_msi_domain(struct device *dev, struct amd_iommu *iommu) { }
 	(MMIO_STATUS_EVT_OVERFLOW_INT_MASK | \
 	 MMIO_STATUS_EVT_INT_MASK | \
 	 MMIO_STATUS_PPR_INT_MASK | \
+	 MMIO_STATUS_GALOG_OVERFLOW_MASK | \
 	 MMIO_STATUS_GALOG_INT_MASK)
 
 irqreturn_t amd_iommu_int_thread(int irq, void *data)

@@ -859,10 +860,16 @@ irqreturn_t amd_iommu_int_thread(int irq, void *data)
 		}
 
 #ifdef CONFIG_IRQ_REMAP
-		if (status & MMIO_STATUS_GALOG_INT_MASK) {
+		if (status & (MMIO_STATUS_GALOG_INT_MASK |
+			      MMIO_STATUS_GALOG_OVERFLOW_MASK)) {
 			pr_devel("Processing IOMMU GA Log\n");
 			iommu_poll_ga_log(iommu);
 		}
+
+		if (status & MMIO_STATUS_GALOG_OVERFLOW_MASK) {
+			pr_info_ratelimited("IOMMU GA Log overflow\n");
+			amd_iommu_restart_ga_log(iommu);
+		}
 #endif
 
 		if (status & MMIO_STATUS_EVT_OVERFLOW_INT_MASK) {

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:37 UTC #13 lore raw

PATCH 13/225 iommu/amd: Fix up merge conflict resolution

From: Jerry Snitselaar <[email protected]>

[ Upstream commit 8ec4e2befef10c7679cd59251956a428e783c0b5 ]

Merge commit e17c6debd4b2 ("Merge branches 'arm/mediatek', 'arm/msm', 'arm/renesas', 'arm/rockchip', 'arm/smmu', 'x86/vt-d' and 'x86/amd' into next") added amd_iommu_init_devices, amd_iommu_uninit_devices,
and amd_iommu_init_notifier back to drivers/iommu/amd/amd_iommu.h.
The only references to them are here, so clean them up.

Fixes e17c6debd4b2 ("Merge branches 'arm/mediatek', 'arm/msm', 'arm/renesas', 'arm/rockchip', 'arm/smmu', 'x86/vt-d' and 'x86/amd' into next")

Cc Joerg Roedel <[email protected]>

Cc Suravee Suthikulpanit <[email protected]>

Cc Will Deacon <[email protected]>

Cc Robin Murphy <[email protected]>

Signed-off-by Jerry Snitselaar <[email protected]>

Reviewed-by Vasant Hegde <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/iommu/amd/amd_iommu.h | 3 ---
 1 file changed, 3 deletions(-)

drivers/iommu/amd/amd_iommu.h +0 -3

index 24c7e6c6c0de9..471f40351f4c8 100644
@@ -16,9 +16,6 @@ extern irqreturn_t amd_iommu_int_handler(int irq, void *data);
 extern void amd_iommu_apply_erratum_63(struct amd_iommu *iommu, u16 devid);
 extern void amd_iommu_restart_event_logging(struct amd_iommu *iommu);
 extern void amd_iommu_restart_ga_log(struct amd_iommu *iommu);
-extern int amd_iommu_init_devices(void);
-extern void amd_iommu_uninit_devices(void);
-extern void amd_iommu_init_notifier(void);
 extern void amd_iommu_set_rlookup_table(struct amd_iommu *iommu, u16 devid);
 
 #ifdef CONFIG_AMD_IOMMU_DEBUGFS

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:37 UTC #14 lore raw

PATCH 14/225 nfsd: make a copy of struct iattr before calling notify_change

Link https://bugzilla.redhat.com/show_bug.cgi?id=2207969

From: Jeff Layton <[email protected]>

[ Upstream commit d53d70084d27f56bcdf5074328f2c9ec861be596 ]

notify_change can modify the iattr structure. In particular it can end up setting ATTR_MODE when ATTR_KILL_SUID is already set, causing a BUG() if the same iattr is passed to notify_change more than once.

Make a copy of the struct iattr before calling notify_change.

Reported-by Zhi Li <[email protected]>

Tested-by Zhi Li <[email protected]>

Fixes 34b91dda7124 ("NFSD: Make nfsd4_setattr() wait before returning NFS4ERR_DELAY")

Signed-off-by Jeff Layton <[email protected]>

Signed-off-by Chuck Lever <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/nfsd/vfs.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

fs/nfsd/vfs.c +9 -1

index dc3ba13546dd6..155b34c4683c2 100644
@@ -469,7 +469,15 @@ nfsd_setattr(struct svc_rqst *rqstp, struct svc_fh *fhp,
 
 	inode_lock(inode);
 	for (retries = 1;;) {
-		host_err = __nfsd_setattr(dentry, iap);
+		struct iattr attrs;
+
+		/*
+		 * notify_change() can alter its iattr argument, making
+		 * @iap unsuitable for submission multiple times. Make a
+		 * copy for every loop iteration.
+		 */
+		attrs = *iap;
+		host_err = __nfsd_setattr(dentry, &attrs);
 		if (host_err != -EAGAIN || !retries--)
 			break;
 		if (!nfsd_wait_for_delegreturn(rqstp, inode))

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:37 UTC #15 lore raw

PATCH 15/225 dmaengine: pl330: rename _start to prevent build error

From: Randy Dunlap <[email protected]>

[ Upstream commit a1a5f2c887252dec161c1e12e04303ca9ba56fa9 ]

"_start" is used in several arches and proably should be reserved for ARCH usage. Using it in a driver for a private symbol can cause a build error when it conflicts with ARCH usage of the same symbol.

Therefore rename pl330's "_start" to "pl330_start_thread" so that there is no conflict and no build error.

drivers/dma/pl330.c:1053:13: error: '_start' redeclared as different kind of symbol
1053 | static bool _start(struct pl330_thread *thrd)

      |             ^~~~~~
In file included from ../include/linux/interrupt.h:21,
                 from ../drivers/dma/pl330.c:18:
arch/riscv/include/asm/sections.h:11:13: note: previous declaration of '_start' with type 'char[]'
   11 | extern char _start[];
      |             ^~~~~~

Fixes b7d861d93945 ("DMA: PL330: Merge PL330 driver into drivers/dma/")

Fixes ae43b3289186 ("ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12")

Signed-off-by Randy Dunlap <[email protected]>

Cc Jaswinder Singh <[email protected]>

Cc Boojin Kim <[email protected]>

Cc Krzysztof Kozlowski <[email protected]>

Cc Russell King <[email protected]>

Cc Vinod Koul <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Vinod Koul <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/dma/pl330.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

drivers/dma/pl330.c +4 -4

index 0d9257fbdfb0d..b4731fe6bbc14 100644
@@ -1050,7 +1050,7 @@ static bool _trigger(struct pl330_thread *thrd)
 	return true;
 }
 
-static bool _start(struct pl330_thread *thrd)
+static bool pl330_start_thread(struct pl330_thread *thrd)
 {
 	switch (_state(thrd)) {
 	case PL330_STATE_FAULT_COMPLETING:

@@ -1702,7 +1702,7 @@ static int pl330_update(struct pl330_dmac *pl330)
 			thrd->req_running = -1;
 
 			/* Get going again ASAP */
-			_start(thrd);
+			pl330_start_thread(thrd);
 
 			/* For now, just make a list of callbacks to be done */
 			list_add_tail(&descdone->rqd, &pl330->req_done);

@@ -2089,7 +2089,7 @@ static void pl330_tasklet(struct tasklet_struct *t)
 	} else {
 		/* Make sure the PL330 Channel thread is active */
 		spin_lock(&pch->thread->dmac->lock);
-		_start(pch->thread);
+		pl330_start_thread(pch->thread);
 		spin_unlock(&pch->thread->dmac->lock);
 	}

@@ -2107,7 +2107,7 @@ static void pl330_tasklet(struct tasklet_struct *t)
 			if (power_down) {
 				pch->active = true;
 				spin_lock(&pch->thread->dmac->lock);
-				_start(pch->thread);
+				pl330_start_thread(pch->thread);
 				spin_unlock(&pch->thread->dmac->lock);
 				power_down = false;
 			}

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:37 UTC #16 lore raw

PATCH 16/225 riscv: Fix unused variable warning when BUILTIN_DTB is set

From: Alexandre Ghiti <[email protected]>

[ Upstream commit 33d418da6f476b15e4510e0a590062583f63cd36 ]

commit ef69d2559fe9 ("riscv: Move early dtb mapping into the fixmap region") wrongly moved the #ifndef CONFIG_BUILTIN_DTB surrounding the pa variable definition in create_fdt_early_page_table(), so move it back to its right place to quiet the following warning:

../arch/riscv/mm/init.c: In function ‘create_fdt_early_page_table’:
../arch/riscv/mm/init.c:925:12: warning: unused variable ‘pa’ [-Wunused-variable]
925 | uintptr_t pa = dtb_pa & ~(PMD_SIZE - 1);

Fixes ef69d2559fe9 ("riscv: Move early dtb mapping into the fixmap region")

Signed-off-by Alexandre Ghiti <[email protected]>

Reviewed-by Conor Dooley <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Palmer Dabbelt <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 arch/riscv/mm/init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

arch/riscv/mm/init.c +1 -1

index 6315a3c942259..2b9906ed2d1d1 100644
@@ -845,9 +845,9 @@ static void __init create_kernel_page_table(pgd_t *pgdir, bool early)
 static void __init create_fdt_early_page_table(uintptr_t fix_fdt_va,
 					       uintptr_t dtb_pa)
 {
+#ifndef CONFIG_BUILTIN_DTB
 	uintptr_t pa = dtb_pa & ~(PMD_SIZE - 1);
 
-#ifndef CONFIG_BUILTIN_DTB
 	/* Make sure the fdt fixmap address is always aligned on PMD size */
 	BUILD_BUG_ON(FIX_FDT % (PMD_SIZE / PAGE_SIZE));

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:37 UTC #17 lore raw

PATCH 17/225 net/mlx5: Drain health before unregistering devlink

From: Shay Drory <[email protected]>

[ Upstream commit 824c8dc4a470040bf0e56ba716543839c2498d49 ]

mlx5 health mechanism is using devlink APIs, which are using devlink notify APIs. After the cited patch, using devlink notify APIs after devlink is unregistered triggers a WARN_ON().
Hence, drain health WQ before devlink is unregistered.

Fixes cf530217408e ("devlink: Notify users when objects are accessible")

Signed-off-by Shay Drory <[email protected]>

Reviewed-by Moshe Shemesh <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/mellanox/mlx5/core/main.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

drivers/net/ethernet/mellanox/mlx5/core/main.c +4 -3

index 91724c5450a05..1a06493da4121 100644
@@ -1753,14 +1753,15 @@ static void remove_one(struct pci_dev *pdev)
 	struct devlink *devlink = priv_to_devlink(dev);
 
 	set_bit(MLX5_BREAK_FW_WAIT, &dev->intf_state);
-	/* mlx5_drain_fw_reset() is using devlink APIs. Hence, we must drain
-	 * fw_reset before unregistering the devlink.
+	/* mlx5_drain_fw_reset() and mlx5_drain_health_wq() are using
+	 * devlink notify APIs.
+	 * Hence, we must drain them before unregistering the devlink.
 	 */
 	mlx5_drain_fw_reset(dev);
+	mlx5_drain_health_wq(dev);
 	devlink_unregister(devlink);
 	mlx5_sriov_disable(pdev);
 	mlx5_crdump_disable(dev);
-	mlx5_drain_health_wq(dev);
 	mlx5_uninit_one(dev);
 	mlx5_pci_close(dev);
 	mlx5_mdev_uninit(dev);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:37 UTC #18 lore raw

PATCH 18/225 net/mlx5: SF, Drain health before removing device

From: Shay Drory <[email protected]>

[ Upstream commit b4646da0573fae9dfa2b8f1f10936cb6eedd7230 ]

There is no point in recovery during device removal. Also, if health work started need to wait for it to avoid races and NULL pointer access.

Hence, drain health WQ before removing device.

Fixes 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver")

Signed-off-by Shay Drory <[email protected]>

Reviewed-by Moshe Shemesh <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/mellanox/mlx5/core/sf/dev/driver.c | 1 +
 1 file changed, 1 insertion(+)

drivers/net/ethernet/mellanox/mlx5/core/sf/dev/driver.c +1 -0

index a7377619ba6f2..2424cdf9cca99 100644
@@ -63,6 +63,7 @@ static void mlx5_sf_dev_remove(struct auxiliary_device *adev)
 	struct mlx5_sf_dev *sf_dev = container_of(adev, struct mlx5_sf_dev, adev);
 	struct devlink *devlink = priv_to_devlink(sf_dev->mdev);
 
+	mlx5_drain_health_wq(sf_dev->mdev);
 	devlink_unregister(devlink);
 	mlx5_uninit_one(sf_dev->mdev);
 	iounmap(sf_dev->mdev->iseg);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:37 UTC #19 lore raw

PATCH 19/225 net/mlx5: fw_tracer, Fix event handling

From: Shay Drory <[email protected]>

[ Upstream commit 341a80de2468f481b1f771683709b5649cbfe513 ]

mlx5 driver needs to parse traces with event_id inside the range of first_string_trace and num_string_trace. However, mlx5 is parsing all events with event_id >= first_string_trace.

Fix it by checking for the correct range.

Fixes c71ad41ccb0c ("net/mlx5: FW tracer, events handling")

Signed-off-by Shay Drory <[email protected]>

Reviewed-by Moshe Shemesh <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c +1 -1

index d7b2ee5de1158..c4e40834e3ff9 100644
@@ -483,7 +483,7 @@ static void poll_trace(struct mlx5_fw_tracer *tracer,
 				(u64)timestamp_low;
 		break;
 	default:
-		if (tracer_event->event_id >= tracer->str_db.first_string_trace ||
+		if (tracer_event->event_id >= tracer->str_db.first_string_trace &&
 		    tracer_event->event_id <= tracer->str_db.first_string_trace +
 					      tracer->str_db.num_string_trace) {
 			tracer_event->type = TRACER_EVENT_TYPE_STRING;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:37 UTC #20 lore raw

PATCH 20/225 net/mlx5e: Dont attach netdev profile while handling internal error

From: Dmytro Linkin <[email protected]>

[ Upstream commit bdf274750fca17b289404ef03453c4070725302c ]

As part of switchdev mode disablement, driver changes port netdevice profile from uplink to nic. If this process is triggered by health recovery flow (PCI reset, for ex.) profile attach would fail because all fw commands aborted when internal error flag is set. As a result, nic netdevice profile is not attached and driver fails to rollback to uplink profile, which leave driver in broken state and cause crash later.

To handle broken state do netdevice profile initialization only instead of full attachment and release mdev resources on driver suspend as expected. Actual netdevice attachment is done during driver load.

Fixes c4d7eb57687f ("net/mxl5e: Add change profile method")

Signed-off-by Dmytro Linkin <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 .../net/ethernet/mellanox/mlx5/core/en_main.c | 35 ++++++++++++++++---
 1 file changed, 31 insertions(+), 4 deletions(-)

drivers/net/ethernet/mellanox/mlx5/core/en_main.c +31 -4

index 94d010e2d5efd..4e7daa382bc05 100644
@@ -5745,8 +5745,8 @@ void mlx5e_detach_netdev(struct mlx5e_priv *priv)
 }
 
 static int
-mlx5e_netdev_attach_profile(struct net_device *netdev, struct mlx5_core_dev *mdev,
-			    const struct mlx5e_profile *new_profile, void *new_ppriv)
+mlx5e_netdev_init_profile(struct net_device *netdev, struct mlx5_core_dev *mdev,
+			  const struct mlx5e_profile *new_profile, void *new_ppriv)
 {
 	struct mlx5e_priv *priv = netdev_priv(netdev);
 	int err;

@@ -5762,6 +5762,25 @@ mlx5e_netdev_attach_profile(struct net_device *netdev, struct mlx5_core_dev *mde
 	err = new_profile->init(priv->mdev, priv->netdev);
 	if (err)
 		goto priv_cleanup;
+
+	return 0;
+
+priv_cleanup:
+	mlx5e_priv_cleanup(priv);
+	return err;
+}
+
+static int
+mlx5e_netdev_attach_profile(struct net_device *netdev, struct mlx5_core_dev *mdev,
+			    const struct mlx5e_profile *new_profile, void *new_ppriv)
+{
+	struct mlx5e_priv *priv = netdev_priv(netdev);
+	int err;
+
+	err = mlx5e_netdev_init_profile(netdev, mdev, new_profile, new_ppriv);
+	if (err)
+		return err;
+
 	err = mlx5e_attach_netdev(priv);
 	if (err)
 		goto profile_cleanup;

@@ -5769,7 +5788,6 @@ mlx5e_netdev_attach_profile(struct net_device *netdev, struct mlx5_core_dev *mde
 
 profile_cleanup:
 	new_profile->cleanup(priv);
-priv_cleanup:
 	mlx5e_priv_cleanup(priv);
 	return err;
 }

@@ -5788,6 +5806,12 @@ int mlx5e_netdev_change_profile(struct mlx5e_priv *priv,
 	priv->profile->cleanup(priv);
 	mlx5e_priv_cleanup(priv);
 
+	if (mdev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR) {
+		mlx5e_netdev_init_profile(netdev, mdev, new_profile, new_ppriv);
+		set_bit(MLX5E_STATE_DESTROYING, &priv->state);
+		return -EIO;
+	}
+
 	err = mlx5e_netdev_attach_profile(netdev, mdev, new_profile, new_ppriv);
 	if (err) { /* roll back to original profile */
 		netdev_warn(netdev, "%s: new profile init failed, %d\n", __func__, err);

@@ -5847,8 +5871,11 @@ static int mlx5e_suspend(struct auxiliary_device *adev, pm_message_t state)
 	struct net_device *netdev = priv->netdev;
 	struct mlx5_core_dev *mdev = priv->mdev;
 
-	if (!netif_device_present(netdev))
+	if (!netif_device_present(netdev)) {
+		if (test_bit(MLX5E_STATE_DESTROYING, &priv->state))
+			mlx5e_destroy_mdev_resources(mdev);
 		return -ENODEV;
+	}
 
 	mlx5e_detach_netdev(priv);
 	mlx5e_destroy_mdev_resources(mdev);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #21 lore raw

PATCH 21/225 net: mellanox: mlxbf_gige: Fix skb_panic splat under memory pressure

From: Thomas Bogendoerfer <[email protected]>

[ Upstream commit d68cb7cf1fd0ef4287bc0ecd1ed0b6ae8e05fc70 ]

Do skb_put() after a new skb has been successfully allocated otherwise the reused skb leads to skb_panics or incorrect packet sizes.

Fixes f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")

Signed-off-by Thomas Bogendoerfer <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 .../ethernet/mellanox/mlxbf_gige/mlxbf_gige_rx.c    | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_rx.c +7 -6

index afa3b92a6905f..0d5a41a2ae010 100644
@@ -245,12 +245,6 @@ static bool mlxbf_gige_rx_packet(struct mlxbf_gige *priv, int *rx_pkts)
 
 		skb = priv->rx_skb[rx_pi_rem];
 
-		skb_put(skb, datalen);
-
-		skb->ip_summed = CHECKSUM_NONE; /* device did not checksum packet */
-
-		skb->protocol = eth_type_trans(skb, netdev);
-
 		/* Alloc another RX SKB for this same index */
 		rx_skb = mlxbf_gige_alloc_skb(priv, MLXBF_GIGE_DEFAULT_BUF_SZ,
 					      &rx_buf_dma, DMA_FROM_DEVICE);

@@ -259,6 +253,13 @@ static bool mlxbf_gige_rx_packet(struct mlxbf_gige *priv, int *rx_pkts)
 		priv->rx_skb[rx_pi_rem] = rx_skb;
 		dma_unmap_single(priv->dev, *rx_wqe_addr,
 				 MLXBF_GIGE_DEFAULT_BUF_SZ, DMA_FROM_DEVICE);
+
+		skb_put(skb, datalen);
+
+		skb->ip_summed = CHECKSUM_NONE; /* device did not checksum packet */
+
+		skb->protocol = eth_type_trans(skb, netdev);
+
 		*rx_wqe_addr = rx_buf_dma;
 	} else if (rx_cqe & MLXBF_GIGE_RX_CQE_PKT_STATUS_MAC_ERR) {
 		priv->stats.rx_mac_errors++;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #22 lore raw

PATCH 22/225 netrom: fix info-leak in nr_write_internal()

From: Eric Dumazet <[email protected]>

[ Upstream commit 31642e7089df8fd3f54ca7843f7ee2952978cad1 ]

Simon Kapadia reported the following issue:

<quote>

The Online Amateur Radio Community (OARC) has recently been experimenting with building a nationwide packet network in the UK.
As part of our experimentation, we have been testing out packet on 300bps HF, and playing with net/rom. For HF packet at this baud rate you really need to make sure that your MTU is relatively low; AX.25 suggests a PACLEN of 60, and a net/rom PACLEN of 40 to go with that.
However the Linux net/rom support didn't work with a low PACLEN;
the mkiss module would truncate packets if you set the PACLEN below about 200 or so, e.g.:

Apr 19 14:00:51 radio kernel: [12985.747310] mkiss: ax1: truncating oversized transmit packet!

This didn't make any sense to me (if the packets are smaller why would they be truncated?) so I started investigating.
I looked at the packets using ethereal, and found that many were just huge compared to what I would expect.
A simple net/rom connection request packet had the request and then a bunch of what appeared to be random data following it:

</quote>

Simon provided a patch that I slightly revised:
Not only we must not use skb_tailroom(), we also do not want to count NR_NETWORK_LEN twice.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")

Co-Developed-by Simon Kapadia <[email protected]>

Signed-off-by Simon Kapadia <[email protected]>

Signed-off-by Eric Dumazet <[email protected]>

Tested-by Simon Kapadia <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 net/netrom/nr_subr.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

net/netrom/nr_subr.c +4 -3

index 3f99b432ea707..e2d2af924cff4 100644
@@ -123,7 +123,7 @@ void nr_write_internal(struct sock *sk, int frametype)
 	unsigned char  *dptr;
 	int len, timeout;
 
-	len = NR_NETWORK_LEN + NR_TRANSPORT_LEN;
+	len = NR_TRANSPORT_LEN;
 
 	switch (frametype & 0x0F) {
 	case NR_CONNREQ:

@@ -141,7 +141,8 @@ void nr_write_internal(struct sock *sk, int frametype)
 		return;
 	}
 
-	if ((skb = alloc_skb(len, GFP_ATOMIC)) == NULL)
+	skb = alloc_skb(NR_NETWORK_LEN + len, GFP_ATOMIC);
+	if (!skb)
 		return;
 
 	/*

@@ -149,7 +150,7 @@ void nr_write_internal(struct sock *sk, int frametype)
 	 */
 	skb_reserve(skb, NR_NETWORK_LEN);
 
-	dptr = skb_put(skb, skb_tailroom(skb));
+	dptr = skb_put(skb, len);
 
 	switch (frametype & 0x0F) {
 	case NR_CONNREQ:

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #23 lore raw

PATCH 23/225 af_packet: Fix data-races of pkt_sk(sk)->num.

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 822b5a1c17df7e338b9f05d1cfe5764e37c7f74f ]

syzkaller found a data race of pkt_sk(sk)->num.

The value is changed under lock_sock() and po->bind_lock, so we need READ_ONCE() to access pkt_sk(sk)->num without these locks in packet_bind_spkt(), packet_bind(), and sk_diag_fill().

Note that WRITE_ONCE() is already added by commit c7d2ef5dd4b0 ("net/packet: annotate accesses to po->bind").

BUG: KCSAN: data-race in packet_bind / packet_do_bind

write (marked) to 0xffff88802ffd1cee of 2 bytes by task 7322 on cpu 0:

 packet_do_bind+0x446/0x640 net/packet/af_packet.c:3236
 packet_bind+0x99/0xe0 net/packet/af_packet.c:3321
 __sys_bind+0x19b/0x1e0 net/socket.c:1803
 __do_sys_bind net/socket.c:1814 [inline]
 __se_sys_bind net/socket.c:1812 [inline]
 __x64_sys_bind+0x40/0x50 net/socket.c:1812
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

read to 0xffff88802ffd1cee of 2 bytes by task 7318 on cpu 1:

 packet_bind+0xbf/0xe0 net/packet/af_packet.c:3322
 __sys_bind+0x19b/0x1e0 net/socket.c:1803
 __do_sys_bind net/socket.c:1814 [inline]
 __se_sys_bind net/socket.c:1812 [inline]
 __x64_sys_bind+0x40/0x50 net/socket.c:1812
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

value changed: 0x0300 -> 0x0000

Reported by Kernel Concurrency Sanitizer on:

CPU: 1 PID: 7318 Comm: syz-executor.4 Not tainted 6.3.0-13380-g7fddb5b5300c #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

Fixes 96ec6327144e ("packet: Diag core and basic socket info dumping")

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")

Reported-by syzkaller <[email protected]>

Signed-off-by Kuniyuki Iwashima <[email protected]>

Reviewed-by Willem de Bruijn <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 net/packet/af_packet.c | 4 ++--
 net/packet/diag.c      | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

net/packet/af_packet.c +2 -2

index 67771b0f57719..c75191b0c82ba 100644
@@ -3291,7 +3291,7 @@ static int packet_bind_spkt(struct socket *sock, struct sockaddr *uaddr,
 	memcpy(name, uaddr->sa_data, sizeof(uaddr->sa_data));
 	name[sizeof(uaddr->sa_data)] = 0;
 
-	return packet_do_bind(sk, name, 0, pkt_sk(sk)->num);
+	return packet_do_bind(sk, name, 0, READ_ONCE(pkt_sk(sk)->num));
 }
 
 static int packet_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)

@@ -3309,7 +3309,7 @@ static int packet_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len
 		return -EINVAL;
 
 	return packet_do_bind(sk, NULL, sll->sll_ifindex,
-			      sll->sll_protocol ? : pkt_sk(sk)->num);
+			      sll->sll_protocol ? : READ_ONCE(pkt_sk(sk)->num));
 }
 
 static struct proto packet_proto = {

net/packet/diag.c +1 -1

index d704c7bf51b20..a68a84574c739 100644
@@ -143,7 +143,7 @@ static int sk_diag_fill(struct sock *sk, struct sk_buff *skb,
 	rp = nlmsg_data(nlh);
 	rp->pdiag_family = AF_PACKET;
 	rp->pdiag_type = sk->sk_type;
-	rp->pdiag_num = ntohs(po->num);
+	rp->pdiag_num = ntohs(READ_ONCE(po->num));
 	rp->pdiag_ino = sk_ino;
 	sock_diag_save_cookie(sk, rp->pdiag_cookie);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #24 lore raw

PATCH 24/225 tls: improve lockless access safety of tls_err_abort()

From: Jakub Kicinski <[email protected]>

[ Upstream commit 8a0d57df8938e9fd2e99d47a85b7f37d86f91097 ]

Most protos' poll() methods insert a memory barrier between writes to sk_err and sk_error_report(). This dates back to commit a4d258036ed9 ("tcp: Fix race in tcp_poll").

I guess we should do the same thing in TLS, tcp_poll() does not hold the socket lock.

Fixes 3c4d7559159b ("tls: kernel TLS support")

Signed-off-by Sasha Levin <[email protected]>

---
 net/tls/tls_strp.c | 4 +++-
 net/tls/tls_sw.c   | 4 +++-
 2 files changed, 6 insertions(+), 2 deletions(-)

net/tls/tls_strp.c +3 -1

index da95abbb7ea32..f37f4a0fcd3c2 100644
@@ -20,7 +20,9 @@ static void tls_strp_abort_strp(struct tls_strparser *strp, int err)
 	strp->stopped = 1;
 
 	/* Report an error on the lower socket */
-	strp->sk->sk_err = -err;
+	WRITE_ONCE(strp->sk->sk_err, -err);
+	/* Paired with smp_rmb() in tcp_poll() */
+	smp_wmb();
 	sk_error_report(strp->sk);
 }

net/tls/tls_sw.c +3 -1

index 992092aeebad9..2e5e7853a6101 100644
@@ -67,7 +67,9 @@ noinline void tls_err_abort(struct sock *sk, int err)
 {
 	WARN_ON_ONCE(err >= 0);
 	/* sk->sk_err should contain a positive error code. */
-	sk->sk_err = -err;
+	WRITE_ONCE(sk->sk_err, -err);
+	/* Paired with smp_rmb() in tcp_poll() */
+	smp_wmb();
 	sk_error_report(sk);
 }

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #25 lore raw

PATCH 25/225 amd-xgbe: fix the false linkup in xgbe_phy_status

From: Raju Rangoju <[email protected]>

[ Upstream commit dc362e20cd6ab7a93d1b09669730c406f0910c35 ]

In the event of a change in XGBE mode, the current auto-negotiation needs to be reset and the AN cycle needs to be re-triggerred. However, the current code ignores the return value of xgbe_set_mode(), leading to false information as the link is declared without checking the status register.

Fix this by propagating the mode switch status information to xgbe_phy_status().

Fixes e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy")

Co-developed-by Sudheesh Mavila <[email protected]>

Signed-off-by Sudheesh Mavila <[email protected]>

Acked-by Shyam Sundar S K <[email protected]>

Signed-off-by Raju Rangoju <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/amd/xgbe/xgbe-mdio.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

drivers/net/ethernet/amd/xgbe/xgbe-mdio.c +9 -3

index 43fdd111235a6..ca7372369b3e6 100644
@@ -1312,7 +1312,7 @@ static enum xgbe_mode xgbe_phy_status_aneg(struct xgbe_prv_data *pdata)
 	return pdata->phy_if.phy_impl.an_outcome(pdata);
 }
 
-static void xgbe_phy_status_result(struct xgbe_prv_data *pdata)
+static bool xgbe_phy_status_result(struct xgbe_prv_data *pdata)
 {
 	struct ethtool_link_ksettings *lks = &pdata->phy.lks;
 	enum xgbe_mode mode;

@@ -1347,8 +1347,13 @@ static void xgbe_phy_status_result(struct xgbe_prv_data *pdata)
 
 	pdata->phy.duplex = DUPLEX_FULL;
 
-	if (xgbe_set_mode(pdata, mode) && pdata->an_again)
+	if (!xgbe_set_mode(pdata, mode))
+		return false;
+
+	if (pdata->an_again)
 		xgbe_phy_reconfig_aneg(pdata);
+
+	return true;
 }
 
 static void xgbe_phy_status(struct xgbe_prv_data *pdata)

@@ -1378,7 +1383,8 @@ static void xgbe_phy_status(struct xgbe_prv_data *pdata)
 			return;
 		}
 
-		xgbe_phy_status_result(pdata);
+		if (xgbe_phy_status_result(pdata))
+			return;
 
 		if (test_bit(XGBE_LINK_INIT, &pdata->dev_state))
 			clear_bit(XGBE_LINK_INIT, &pdata->dev_state);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #26 lore raw

PATCH 26/225 perf ftrace latency: Remove unnecessary "--" from --use-nsec option

From: Namhyung Kim <[email protected]>

[ Upstream commit 8d73259ef23f449329294dc187932f7470268126 ]

The option name should not have the dashes. Current version shows four dashes for the option.

  $ perf ftrace latency -h

Usage: perf ftrace [<options>] [<command>]
or: perf ftrace [<options>] -- [<command>] [<options>]
or: perf ftrace {trace|latency} [<options>] [<command>]
or: perf ftrace {trace|latency} [<options>] -- [<command>] [<options>]

-b, --use-bpf Use BPF to measure function latency
-n, ----use-nsec Use nano-second histogram
-T, --trace-funcs <func>
Show latency of given function

Fixes 84005bb6148618cc ("perf ftrace latency: Add -n/--use-nsec option")

Signed-off-by Namhyung Kim <[email protected]>

Tested-by Arnaldo Carvalho de Melo <[email protected]>

Cc Adrian Hunter <[email protected]>

Cc Changbin Du <[email protected]>

Cc Ian Rogers <[email protected]>

Cc Ingo Molnar <[email protected]>

Cc Jiri Olsa <[email protected]>

Cc Peter Zijlstra <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Arnaldo Carvalho de Melo <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 tools/perf/builtin-ftrace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

tools/perf/builtin-ftrace.c +1 -1

index 4bc5b7cf3e04b..1d40f9bcb63bc 100644
@@ -1175,7 +1175,7 @@ int cmd_ftrace(int argc, const char **argv)
 	OPT_BOOLEAN('b', "use-bpf", &ftrace.target.use_bpf,
 		    "Use BPF to measure function latency"),
 #endif
-	OPT_BOOLEAN('n', "--use-nsec", &ftrace.use_nsec,
+	OPT_BOOLEAN('n', "use-nsec", &ftrace.use_nsec,
 		    "Use nano-second histogram"),
 	OPT_PARENT(common_options),
 	};

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #27 lore raw

PATCH 27/225 mtd: rawnand: ingenic: fix empty stub helper definitions

From: Arnd Bergmann <[email protected]>

[ Upstream commit 650a8884a364ff2568b51cde9009cfd43cdae6ad ]

A few functions provide an empty interface definition when CONFIG_MTD_NAND_INGENIC_ECC is disabled, but they are accidentally defined as global functions in the header:

drivers/mtd/nand/raw/ingenic/ingenic_ecc.h:39:5: error: no previous prototype for 'ingenic_ecc_calculate' drivers/mtd/nand/raw/ingenic/ingenic_ecc.h:46:5: error: no previous prototype for 'ingenic_ecc_correct' drivers/mtd/nand/raw/ingenic/ingenic_ecc.h:53:6: error: no previous prototype for 'ingenic_ecc_release' drivers/mtd/nand/raw/ingenic/ingenic_ecc.h:57:21: error: no previous prototype for 'of_ingenic_ecc_get'

Turn them into 'static inline' definitions instead.

Fixes 15de8c6efd0e ("mtd: rawnand: ingenic: Separate top-level and SoC specific code")

Link https://lore.kernel.org/linux-mtd/[email protected] open here

Reviewed-by Paul Cercueil <[email protected]>

Signed-off-by Miquel Raynal <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/mtd/nand/raw/ingenic/ingenic_ecc.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

drivers/mtd/nand/raw/ingenic/ingenic_ecc.h +4 -4

index 2cda439b5e11b..017868f59f222 100644
@@ -36,25 +36,25 @@ int ingenic_ecc_correct(struct ingenic_ecc *ecc,
 void ingenic_ecc_release(struct ingenic_ecc *ecc);
 struct ingenic_ecc *of_ingenic_ecc_get(struct device_node *np);
 #else /* CONFIG_MTD_NAND_INGENIC_ECC */
-int ingenic_ecc_calculate(struct ingenic_ecc *ecc,
+static inline int ingenic_ecc_calculate(struct ingenic_ecc *ecc,
 			  struct ingenic_ecc_params *params,
 			  const u8 *buf, u8 *ecc_code)
 {
 	return -ENODEV;
 }
 
-int ingenic_ecc_correct(struct ingenic_ecc *ecc,
+static inline int ingenic_ecc_correct(struct ingenic_ecc *ecc,
 			struct ingenic_ecc_params *params, u8 *buf,
 			u8 *ecc_code)
 {
 	return -ENODEV;
 }
 
-void ingenic_ecc_release(struct ingenic_ecc *ecc)
+static inline void ingenic_ecc_release(struct ingenic_ecc *ecc)
 {
 }
 
-struct ingenic_ecc *of_ingenic_ecc_get(struct device_node *np)
+static inline struct ingenic_ecc *of_ingenic_ecc_get(struct device_node *np)
 {
 	return ERR_PTR(-ENODEV);
 }

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #28 lore raw

PATCH 28/225 RDMA/irdma: Prevent QP use after free

From: Mustafa Ismail <[email protected]>

[ Upstream commit c8f304d75f6c6cc679a73f89591f9a915da38f09 ]

There is a window where the poll cq may use a QP that has been freed. This can happen if a CQE is polled before irdma_clean_cqes() can clear the CQE's related to the QP and the destroy QP races to free the QP memory. then the QP structures are used in irdma_poll_cq. Fix this by moving the clearing of CQE's before the reference is removed and the QP is destroyed.

Fixes b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Mustafa Ismail <[email protected]>

Signed-off-by Shiraz Saleem <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/infiniband/hw/irdma/verbs.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

drivers/infiniband/hw/irdma/verbs.c +6 -5

index f6973ea55eda7..1c5a61f51a67a 100644
@@ -522,11 +522,6 @@ static int irdma_destroy_qp(struct ib_qp *ibqp, struct ib_udata *udata)
 	if (!iwqp->user_mode)
 		cancel_delayed_work_sync(&iwqp->dwork_flush);
 
-	irdma_qp_rem_ref(&iwqp->ibqp);
-	wait_for_completion(&iwqp->free_qp);
-	irdma_free_lsmm_rsrc(iwqp);
-	irdma_cqp_qp_destroy_cmd(&iwdev->rf->sc_dev, &iwqp->sc_qp);
-
 	if (!iwqp->user_mode) {
 		if (iwqp->iwscq) {
 			irdma_clean_cqes(iwqp, iwqp->iwscq);

@@ -534,6 +529,12 @@ static int irdma_destroy_qp(struct ib_qp *ibqp, struct ib_udata *udata)
 				irdma_clean_cqes(iwqp, iwqp->iwrcq);
 		}
 	}
+
+	irdma_qp_rem_ref(&iwqp->ibqp);
+	wait_for_completion(&iwqp->free_qp);
+	irdma_free_lsmm_rsrc(iwqp);
+	irdma_cqp_qp_destroy_cmd(&iwdev->rf->sc_dev, &iwqp->sc_qp);
+
 	irdma_remove_push_mmap_entries(iwqp);
 	irdma_free_qp_rsrc(iwqp);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #29 lore raw

PATCH 29/225 RDMA/irdma: Fix Local Invalidate fencing

From: Mustafa Ismail <[email protected]>

[ Upstream commit 5842d1d9c1b0d17e0c29eae65ae1f245f83682dd ]

If the local invalidate fence is indicated in the WR, only the read fence is currently being set in WQE. Fix this to set both the read and local fence in the WQE.

Fixes b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Mustafa Ismail <[email protected]>

Signed-off-by Shiraz Saleem <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/infiniband/hw/irdma/verbs.c | 1 +
 1 file changed, 1 insertion(+)

drivers/infiniband/hw/irdma/verbs.c +1 -0

index 1c5a61f51a67a..6a8bb6ed4bf43 100644
@@ -3191,6 +3191,7 @@ static int irdma_post_send(struct ib_qp *ibqp,
 			break;
 		case IB_WR_LOCAL_INV:
 			info.op_type = IRDMA_OP_TYPE_INV_STAG;
+			info.local_fence = info.read_fence;
 			info.op.inv_local_stag.target_stag = ib_wr->ex.invalidate_rkey;
 			err = irdma_uk_stag_local_invalidate(ukqp, &info, true);
 			break;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #30 lore raw

PATCH 30/225 af_packet: do not use READ_ONCE() in packet_bind()

From: Eric Dumazet <[email protected]>

[ Upstream commit 6ffc57ea004234d9373c57b204fd10370a69f392 ]

A recent patch added READ_ONCE() in packet_bind() and packet_bind_spkt()

This is better handled by reading pkt_sk(sk)->num later in packet_do_bind() while appropriate lock is held.

READ_ONCE() in writers are often an evidence of something being wrong.

Fixes 822b5a1c17df ("af_packet: Fix data-races of pkt_sk(sk)->num.")

Signed-off-by Eric Dumazet <[email protected]>

Reviewed-by Willem de Bruijn <[email protected]>

Reviewed-by Jiri Pirko <[email protected]>

Reviewed-by Kuniyuki Iwashima <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 net/packet/af_packet.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

net/packet/af_packet.c +5 -3

index c75191b0c82ba..6ab9d5b543387 100644
@@ -3193,6 +3193,9 @@ static int packet_do_bind(struct sock *sk, const char *name, int ifindex,
 
 	lock_sock(sk);
 	spin_lock(&po->bind_lock);
+	if (!proto)
+		proto = po->num;
+
 	rcu_read_lock();
 
 	if (po->fanout) {

@@ -3291,7 +3294,7 @@ static int packet_bind_spkt(struct socket *sock, struct sockaddr *uaddr,
 	memcpy(name, uaddr->sa_data, sizeof(uaddr->sa_data));
 	name[sizeof(uaddr->sa_data)] = 0;
 
-	return packet_do_bind(sk, name, 0, READ_ONCE(pkt_sk(sk)->num));
+	return packet_do_bind(sk, name, 0, 0);
 }
 
 static int packet_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)

@@ -3308,8 +3311,7 @@ static int packet_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len
 	if (sll->sll_family != AF_PACKET)
 		return -EINVAL;
 
-	return packet_do_bind(sk, NULL, sll->sll_ifindex,
-			      sll->sll_protocol ? : READ_ONCE(pkt_sk(sk)->num));
+	return packet_do_bind(sk, NULL, sll->sll_ifindex, sll->sll_protocol);
 }
 
 static struct proto packet_proto = {

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #31 lore raw

PATCH 31/225 tcp: deny tcp_disconnect() when threads are waiting

From: Eric Dumazet <[email protected]>

[ Upstream commit 4faeee0cf8a5d88d63cdbc3bab124fb0e6aed08c ]

Historically connect(AF_UNSPEC) has been abused by syzkaller and other fuzzers to trigger various bugs.

A recent one triggers a divide-by-zero [1], and Paolo Abeni was able to diagnose the issue.

tcp_recvmsg_locked() has tests about sk_state being not TCP_LISTEN and TCP REPAIR mode being not used.

Then later if socket lock is released in sk_wait_data(), another thread can call connect(AF_UNSPEC), then make this socket a TCP listener.

When recvmsg() is resumed, it can eventually call tcp_cleanup_rbuf() and attempt a divide by 0 in tcp_rcv_space_adjust() [1]

This patch adds a new socket field, counting number of threads blocked in sk_wait_event() and inet_wait_for_connect().

If this counter is not zero, tcp_disconnect() returns an error.

This patch adds code in blocking socket system calls, thus should not hurt performance of non blocking ones.

Note that we probably could revert commit 499350a5a6e7 ("tcp:
initialize rcv_mss to TCP_MIN_MSS instead of 0") to restore original tcpi_rcv_mss meaning (was 0 if no payload was ever received on a socket)

[1]
divide error: 0000 [#1] PREEMPT SMP KASAN

CPU: 0 PID: 13832 Comm: syz-executor.5 Not tainted 6.3.0-rc4-syzkaller-00224-g00c7b5f4ddc5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
RIP: 0010:tcp_rcv_space_adjust+0x36e/0x9d0 net/ipv4/tcp_input.c:740
Code: 00 00 00 00 fc ff df 4c 89 64 24 48 8b 44 24 04 44 89 f9 41 81 c7 80 03 00 00 c1 e1 04 44 29 f0 48 63 c9 48 01 e9 48 0f af c1 <49> f7 f6 48 8d 04 41 48 89 44 24 40 48 8b 44 24 30 48 c1 e8 03 48
RSP: 0018:ffffc900033af660 EFLAGS: 00010206
RAX: 4a66b76cbade2c48 RBX: ffff888076640cc0 RCX: 00000000c334e4ac
RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000001
RBP: 00000000c324e86c R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880766417f8
R13: ffff888028fbb980 R14: 0000000000000000 R15: 0000000000010344
FS: 00007f5bffbfe700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32f25000 CR3: 000000007ced0000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tcp_recvmsg_locked+0x100e/0x22e0 net/ipv4/tcp.c:2616
tcp_recvmsg+0x117/0x620 net/ipv4/tcp.c:2681
inet6_recvmsg+0x114/0x640 net/ipv6/af_inet6.c:670
sock_recvmsg_nosec net/socket.c:1017 [inline]
sock_recvmsg+0xe2/0x160 net/socket.c:1038
____sys_recvmsg+0x210/0x5a0 net/socket.c:2720
___sys_recvmsg+0xf2/0x180 net/socket.c:2762
do_recvmmsg+0x25e/0x6e0 net/socket.c:2856
__sys_recvmmsg net/socket.c:2935 [inline]
__do_sys_recvmmsg net/socket.c:2958 [inline]
__se_sys_recvmmsg net/socket.c:2951 [inline]
__x64_sys_recvmmsg+0x20f/0x260 net/socket.c:2951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f5c0108c0f9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f5bffbfe168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00007f5c011ac050 RCX: 00007f5c0108c0f9
RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000003
RBP: 00007f5c010e7b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f5c012cfb1f R14: 00007f5bffbfe300 R15: 0000000000022000
</TASK>

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")

Reported-by syzbot <[email protected]>

Reported-by Paolo Abeni <[email protected]>

Diagnosed-by Paolo Abeni <[email protected]>

Signed-off-by Eric Dumazet <[email protected]>

Tested-by Paolo Abeni <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 include/net/sock.h              | 4 ++++
 net/ipv4/af_inet.c              | 2 ++
 net/ipv4/inet_connection_sock.c | 1 +
 net/ipv4/tcp.c                  | 6 ++++++
 4 files changed, 13 insertions(+)

include/net/sock.h +4 -0

index beb1b747fb09d..f11b98bd0244c 100644
@@ -333,6 +333,7 @@ struct sk_filter;
   *	@sk_cgrp_data: cgroup data for this cgroup
   *	@sk_memcg: this socket's memory cgroup association
   *	@sk_write_pending: a write to stream socket waits to start
+  *	@sk_wait_pending: number of threads blocked on this socket
   *	@sk_state_change: callback to indicate change in the state of the sock
   *	@sk_data_ready: callback to indicate there is data to be processed
   *	@sk_write_space: callback to indicate there is bf sending space available

@@ -425,6 +426,7 @@ struct sock {
 	unsigned int		sk_napi_id;
 #endif
 	int			sk_rcvbuf;
+	int			sk_wait_pending;
 
 	struct sk_filter __rcu	*sk_filter;
 	union {

@@ -1170,6 +1172,7 @@ static inline void sock_rps_reset_rxhash(struct sock *sk)
 
 #define sk_wait_event(__sk, __timeo, __condition, __wait)		\
 	({	int __rc;						\
+		__sk->sk_wait_pending++;				\
 		release_sock(__sk);					\
 		__rc = __condition;					\
 		if (!__rc) {						\

@@ -1179,6 +1182,7 @@ static inline void sock_rps_reset_rxhash(struct sock *sk)
 		}							\
 		sched_annotate_sleep();					\
 		lock_sock(__sk);					\
+		__sk->sk_wait_pending--;				\
 		__rc = __condition;					\
 		__rc;							\
 	})

net/ipv4/af_inet.c +2 -0

index 5fd0ff5734e36..ebb737ac9e894 100644
@@ -589,6 +589,7 @@ static long inet_wait_for_connect(struct sock *sk, long timeo, int writebias)
 
 	add_wait_queue(sk_sleep(sk), &wait);
 	sk->sk_write_pending += writebias;
+	sk->sk_wait_pending++;
 
 	/* Basic assumption: if someone sets sk->sk_err, he _must_
 	 * change state of the socket from TCP_SYN_*.

@@ -604,6 +605,7 @@ static long inet_wait_for_connect(struct sock *sk, long timeo, int writebias)
 	}
 	remove_wait_queue(sk_sleep(sk), &wait);
 	sk->sk_write_pending -= writebias;
+	sk->sk_wait_pending--;
 	return timeo;
 }

net/ipv4/inet_connection_sock.c +1 -0

index 916075e00d066..8e35ea66d930a 100644
@@ -1143,6 +1143,7 @@ struct sock *inet_csk_clone_lock(const struct sock *sk,
 	if (newsk) {
 		struct inet_connection_sock *newicsk = inet_csk(newsk);
 
+		newsk->sk_wait_pending = 0;
 		inet_sk_set_state(newsk, TCP_SYN_RECV);
 		newicsk->icsk_bind_hash = NULL;
 		newicsk->icsk_bind2_hash = NULL;

net/ipv4/tcp.c +6 -0

index 021a8bf6a1898..c77b57d4a832a 100644
@@ -3079,6 +3079,12 @@ int tcp_disconnect(struct sock *sk, int flags)
 	int old_state = sk->sk_state;
 	u32 seq;
 
+	/* Deny disconnect if other threads are blocked in sk_wait_event()
+	 * or inet_wait_for_connect().
+	 */
+	if (sk->sk_wait_pending)
+		return -EBUSY;
+
 	if (old_state != TCP_CLOSE)
 		tcp_set_state(sk, TCP_CLOSE);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #32 lore raw

PATCH 32/225 tcp: Return user_mss for TCP_MAXSEG in CLOSE/LISTEN state if user_mss set

Link https://lore.kernel.org/netdev/CANn89i+3kL9pYtkxkwxwNMzvC_w3LNUum_2=3u+UyLBmGmifHA@mail.gmail.com/#t open here

From: Cambda Zhu <[email protected]>

[ Upstream commit 34dfde4ad87b84d21278a7e19d92b5b2c68e6c4d ]

This patch replaces the tp->mss_cache check in getting TCP_MAXSEG with tp->rx_opt.user_mss check for CLOSE/LISTEN sock. Since tp->mss_cache is initialized with TCP_MSS_DEFAULT, checking if it's zero is probably a bug.

With this change, getting TCP_MAXSEG before connecting will return default MSS normally, and return user_mss if user_mss is set.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")

Reported-by Jack Yang <[email protected]>

Signed-off-by Cambda Zhu <[email protected]>

Link https://lore.kernel.org/netdev/[email protected]/ open here

Reviewed-by Jason Xing <[email protected]>

Reviewed-by Eric Dumazet <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 net/ipv4/tcp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

net/ipv4/tcp.c +2 -1

index c77b57d4a832a..0bd0be3c63d22 100644
@@ -4071,7 +4071,8 @@ int do_tcp_getsockopt(struct sock *sk, int level,
 	switch (optname) {
 	case TCP_MAXSEG:
 		val = tp->mss_cache;
-		if (!val && ((1 << sk->sk_state) & (TCPF_CLOSE | TCPF_LISTEN)))
+		if (tp->rx_opt.user_mss &&
+		    ((1 << sk->sk_state) & (TCPF_CLOSE | TCPF_LISTEN)))
 			val = tp->rx_opt.user_mss;
 		if (tp->repair)
 			val = tp->rx_opt.mss_clamp;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #33 lore raw

PATCH 33/225 net/smc: Scan from current RMB list when no position specified

From: Wen Gu <[email protected]>

[ Upstream commit b24aa141c2ff26c919237aee61ea1818fc6780d9 ]

When finding the first RMB of link group, it should start from the current RMB list whose index is 0. So fix it.

Fixes b4ba4652b3f8 ("net/smc: extend LLC layer for SMC-Rv2")

Signed-off-by Wen Gu <[email protected]>

Signed-off-by Paolo Abeni <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/smc/smc_llc.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

net/smc/smc_llc.c +4 -1

index 524649d0ab652..85af5bfa96228 100644
@@ -578,7 +578,10 @@ static struct smc_buf_desc *smc_llc_get_next_rmb(struct smc_link_group *lgr,
 {
 	struct smc_buf_desc *buf_next;
 
-	if (!buf_pos || list_is_last(&buf_pos->list, &lgr->rmbs[*buf_lst])) {
+	if (!buf_pos)
+		return _smc_llc_get_next_rmb(lgr, buf_lst);
+
+	if (list_is_last(&buf_pos->list, &lgr->rmbs[*buf_lst])) {
 		(*buf_lst)++;
 		return _smc_llc_get_next_rmb(lgr, buf_lst);
 	}

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #34 lore raw

PATCH 34/225 net/smc: Dont use RMBs not mapped to new link in SMCRv2 ADD LINK

From: Wen Gu <[email protected]>

[ Upstream commit 71c6aa0305e3d2365d3bfd0134b4025d9e7ba388 ]

We encountered a crash when using SMCRv2. It is caused by a logical error in smc_llc_fill_ext_v2().

 BUG: kernel NULL pointer dereference, address: 0000000000000014
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 7 PID: 453 Comm: kworker/7:4 Kdump: loaded Tainted: G        W   E      6.4.0-rc3+ #44
 Workqueue: events smc_llc_add_link_work [smc]
 RIP: 0010:smc_llc_fill_ext_v2+0x117/0x280 [smc]
 RSP: 0018:ffffacb5c064bd88 EFLAGS: 00010282
 RAX: ffff9a6bc1c3c02c RBX: ffff9a6be3558000 RCX: 0000000000000000
 RDX: 0000000000000002 RSI: 0000000000000002 RDI: 000000000000000a
 RBP: ffffacb5c064bdb8 R08: 0000000000000040 R09: 000000000000000c
 R10: ffff9a6bc0910300 R11: 0000000000000002 R12: 0000000000000000
 R13: 0000000000000002 R14: ffff9a6bc1c3c02c R15: ffff9a6be3558250
 FS:  0000000000000000(0000) GS:ffff9a6eefdc0000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000014 CR3: 000000010b078003 CR4: 00000000003706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  smc_llc_send_add_link+0x1ae/0x2f0 [smc]
  smc_llc_srv_add_link+0x2c9/0x5a0 [smc]
  ? cc_mkenc+0x40/0x60
  smc_llc_add_link_work+0xb8/0x140 [smc]
  process_one_work+0x1e5/0x3f0
  worker_thread+0x4d/0x2f0
  ? __pfx_worker_thread+0x10/0x10
  kthread+0xe5/0x120
  ? __pfx_kthread+0x10/0x10
  ret_from_fork+0x2c/0x50
  </TASK>

When an alernate RNIC is available in system, SMC will try to add a new link based on the RNIC for resilience. All the RMBs in use will be mapped to the new link. Then the RMBs' MRs corresponding to the new link will be filled into SMCRv2 LLC ADD LINK messages.

However, smc_llc_fill_ext_v2() mistakenly accesses to unused RMBs which haven't been mapped to the new link and have no valid MRs, thus causing a crash. So this patch fixes the logic.

Fixes b4ba4652b3f8 ("net/smc: extend LLC layer for SMC-Rv2")

Signed-off-by Wen Gu <[email protected]>

Signed-off-by Paolo Abeni <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/smc/smc_llc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

net/smc/smc_llc.c +2 -2

index 85af5bfa96228..3008dfdf7c55e 100644
@@ -617,6 +617,8 @@ static int smc_llc_fill_ext_v2(struct smc_llc_msg_add_link_v2_ext *ext,
 		goto out;
 	buf_pos = smc_llc_get_first_rmb(lgr, &buf_lst);
 	for (i = 0; i < ext->num_rkeys; i++) {
+		while (buf_pos && !(buf_pos)->used)
+			buf_pos = smc_llc_get_next_rmb(lgr, &buf_lst, buf_pos);
 		if (!buf_pos)
 			break;
 		rmb = buf_pos;

@@ -626,8 +628,6 @@ static int smc_llc_fill_ext_v2(struct smc_llc_msg_add_link_v2_ext *ext,
 			cpu_to_be64((uintptr_t)rmb->cpu_addr) :
 			cpu_to_be64((u64)sg_dma_address(rmb->sgt[lnk_idx].sgl));
 		buf_pos = smc_llc_get_next_rmb(lgr, &buf_lst, buf_pos);
-		while (buf_pos && !(buf_pos)->used)
-			buf_pos = smc_llc_get_next_rmb(lgr, &buf_lst, buf_pos);
 	}
 	len += i * sizeof(ext->rt[0]);
 out:

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #35 lore raw

PATCH 35/225 net/sched: sch_ingress: Only create under TC_H_INGRESS

From: Peilin Ye <[email protected]>

[ Upstream commit c7cfbd115001f94de9e4053657946a383147e803 ]

ingress Qdiscs are only supposed to be created under TC_H_INGRESS. Return -EOPNOTSUPP if 'parent' is not TC_H_INGRESS, similar to mq_init().

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")

Reported-by [email protected]

Closes https://lore.kernel.org/r/[email protected]/ open here

Signed-off-by Peilin Ye <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/sched/sch_ingress.c | 6 ++++++
 1 file changed, 6 insertions(+)

net/sched/sch_ingress.c +6 -0

index 84838128b9c5b..f9ef6deb27709 100644
@@ -80,6 +80,9 @@ static int ingress_init(struct Qdisc *sch, struct nlattr *opt,
 	struct net_device *dev = qdisc_dev(sch);
 	int err;
 
+	if (sch->parent != TC_H_INGRESS)
+		return -EOPNOTSUPP;
+
 	net_inc_ingress_queue();
 
 	mini_qdisc_pair_init(&q->miniqp, sch, &dev->miniq_ingress);

@@ -101,6 +104,9 @@ static void ingress_destroy(struct Qdisc *sch)
 {
 	struct ingress_sched_data *q = qdisc_priv(sch);
 
+	if (sch->parent != TC_H_INGRESS)
+		return;
+
 	tcf_block_put_ext(q->block, sch, &q->block_info);
 	net_dec_ingress_queue();
 }

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #36 lore raw

PATCH 36/225 net/sched: sch_clsact: Only create under TC_H_CLSACT

From: Peilin Ye <[email protected]>

[ Upstream commit 5eeebfe6c493192b10d516abfd72742900f2a162 ]

clsact Qdiscs are only supposed to be created under TC_H_CLSACT (which equals TC_H_INGRESS). Return -EOPNOTSUPP if 'parent' is not TC_H_CLSACT.

Fixes 1f211a1b929c ("net, sched: add clsact qdisc")

Signed-off-by Peilin Ye <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/sched/sch_ingress.c | 6 ++++++
 1 file changed, 6 insertions(+)

net/sched/sch_ingress.c +6 -0

index f9ef6deb27709..35963929e1178 100644
@@ -225,6 +225,9 @@ static int clsact_init(struct Qdisc *sch, struct nlattr *opt,
 	struct net_device *dev = qdisc_dev(sch);
 	int err;
 
+	if (sch->parent != TC_H_CLSACT)
+		return -EOPNOTSUPP;
+
 	net_inc_ingress_queue();
 	net_inc_egress_queue();

@@ -254,6 +257,9 @@ static void clsact_destroy(struct Qdisc *sch)
 {
 	struct clsact_sched_data *q = qdisc_priv(sch);
 
+	if (sch->parent != TC_H_CLSACT)
+		return;
+
 	tcf_block_put_ext(q->egress_block, sch, &q->egress_block_info);
 	tcf_block_put_ext(q->ingress_block, sch, &q->ingress_block_info);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #37 lore raw

PATCH 37/225 net/sched: Reserve TC_H_INGRESS (TC_H_CLSACT) for ingress (clsact) Qdiscs

From: Peilin Ye <[email protected]>

[ Upstream commit f85fa45d4a9408d98c46c8fa45ba2e3b2f4bf219 ]

Currently it is possible to add e.g. an HTB Qdisc under ffff:fff1 (TC_H_INGRESS, TC_H_CLSACT):

  $ ip link add name ifb0 type ifb
  $ tc qdisc add dev ifb0 parent ffff:fff1 htb
  $ tc qdisc add dev ifb0 clsact
  Error: Exclusivity flag on, cannot modify.
  $ drgn
  ...

Quoted 3 lines

Quoted 3 lines
Quoted 3 lines
ifb0 = netdev_get_by_name(prog, "ifb0")
qdisc = ifb0.ingress_queue.qdisc_sleeping
print(qdisc.ops.id.string_().decode())

htb

Quoted 1 line

Quoted 1 line
Quoted 1 line
qdisc.flags.value_() # TCQ_F_INGRESS

Only allow ingress and clsact Qdiscs under ffff:fff1. Return -EINVAL for everything else. Make TCQ_F_INGRESS a static flag of ingress and clsact Qdiscs.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")

Fixes 1f211a1b929c ("net, sched: add clsact qdisc")

Signed-off-by Peilin Ye <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/sched/sch_api.c     | 7 ++++++-
 net/sched/sch_ingress.c | 4 ++--
 2 files changed, 8 insertions(+), 3 deletions(-)

net/sched/sch_api.c +6 -1

index c82532e206992..2244e00ea9a10 100644
@@ -1241,7 +1241,12 @@ static struct Qdisc *qdisc_create(struct net_device *dev,
 	sch->parent = parent;
 
 	if (handle == TC_H_INGRESS) {
-		sch->flags |= TCQ_F_INGRESS;
+		if (!(sch->flags & TCQ_F_INGRESS)) {
+			NL_SET_ERR_MSG(extack,
+				       "Specified parent ID is reserved for ingress and clsact Qdiscs");
+			err = -EINVAL;
+			goto err_out3;
+		}
 		handle = TC_H_MAKE(TC_H_INGRESS, 0);
 	} else {
 		if (handle == 0) {

net/sched/sch_ingress.c +2 -2

index 35963929e1178..e43a454993723 100644
@@ -140,7 +140,7 @@ static struct Qdisc_ops ingress_qdisc_ops __read_mostly = {
 	.cl_ops			=	&ingress_class_ops,
 	.id			=	"ingress",
 	.priv_size		=	sizeof(struct ingress_sched_data),
-	.static_flags		=	TCQ_F_CPUSTATS,
+	.static_flags		=	TCQ_F_INGRESS | TCQ_F_CPUSTATS,
 	.init			=	ingress_init,
 	.destroy		=	ingress_destroy,
 	.dump			=	ingress_dump,

@@ -281,7 +281,7 @@ static struct Qdisc_ops clsact_qdisc_ops __read_mostly = {
 	.cl_ops			=	&clsact_class_ops,
 	.id			=	"clsact",
 	.priv_size		=	sizeof(struct clsact_sched_data),
-	.static_flags		=	TCQ_F_CPUSTATS,
+	.static_flags		=	TCQ_F_INGRESS | TCQ_F_CPUSTATS,
 	.init			=	clsact_init,
 	.destroy		=	clsact_destroy,
 	.dump			=	ingress_dump,

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #38 lore raw

PATCH 38/225 net/sched: Prohibit regrafting ingress or clsact Qdiscs

From: Peilin Ye <[email protected]>

[ Upstream commit 9de95df5d15baa956c2b70b9e794842e790a8a13 ]

Currently, after creating an ingress (or clsact) Qdisc and grafting it under TC_H_INGRESS (TC_H_CLSACT), it is possible to graft it again under e.g. a TBF Qdisc:

  $ ip link add ifb0 type ifb
  $ tc qdisc add dev ifb0 handle 1: root tbf rate 20kbit buffer 1600 limit 3000
  $ tc qdisc add dev ifb0 clsact
  $ tc qdisc link dev ifb0 handle ffff: parent 1:1
  $ tc qdisc show dev ifb0
  qdisc tbf 1: root refcnt 2 rate 20Kbit burst 1600b lat 560.0ms
  qdisc clsact ffff: parent ffff:fff1 refcnt 2
                                      ^^^^^^^^

clsact's refcount has increased: it is now grafted under both TC_H_CLSACT and 1:1.

ingress and clsact Qdiscs should only be used under TC_H_INGRESS (TC_H_CLSACT). Prohibit regrafting them.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")

Fixes 1f211a1b929c ("net, sched: add clsact qdisc")

Signed-off-by Peilin Ye <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/sched/sch_api.c | 5 +++++
 1 file changed, 5 insertions(+)

net/sched/sch_api.c +5 -0

index 2244e00ea9a10..95f38595b0f7f 100644
@@ -1591,6 +1591,11 @@ static int tc_modify_qdisc(struct sk_buff *skb, struct nlmsghdr *n,
 					NL_SET_ERR_MSG(extack, "Invalid qdisc name");
 					return -EINVAL;
 				}
+				if (q->flags & TCQ_F_INGRESS) {
+					NL_SET_ERR_MSG(extack,
+						       "Cannot regraft ingress or clsact Qdiscs");
+					return -EINVAL;
+				}
 				if (q == p ||
 				    (p && check_loop(q, p, 0))) {
 					NL_SET_ERR_MSG(extack, "Qdisc parent/child loop detected");

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #39 lore raw

PATCH 39/225 net: sched: fix NULL pointer dereference in mq_attach

From: Zhengchao Shao <[email protected]>

[ Upstream commit 36eec020fab668719b541f34d97f44e232ffa165 ]

When use the following command to test:
1)ip link add bond0 type bond
2)ip link set bond0 up
3)tc qdisc add dev bond0 root handle ffff: mq
4)tc qdisc replace dev bond0 parent ffff:fff1 handle ffff: mq

The kernel reports NULL pointer dereference issue. The stack information is as follows:

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Internal error: Oops: 0000000096000006 [#1] SMP
Modules linked in:
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mq_attach+0x44/0xa0
lr : qdisc_graft+0x20c/0x5cc

sp : ffff80000e2236a0
x29: ffff80000e2236a0 x28: ffff0000c0e59d80 x27: ffff0000c0be19c0
x26: ffff0000cae3e800 x25: 0000000000000010 x24: 00000000fffffff1
x23: 0000000000000000 x22: ffff0000cae3e800 x21: ffff0000c9df4000
x20: ffff0000c9df4000 x19: 0000000000000000 x18: ffff80000a934000
x17: ffff8000f5b56000 x16: ffff80000bb08000 x15: 0000000000000000
x14: 0000000000000000 x13: 6b6b6b6b6b6b6b6b x12: 6b6b6b6b00000001
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff0000c0be0730 x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008 x5 : ffff0000cae3e864 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000001 x1 : ffff8000090bc23c x0 : 0000000000000000

Call trace:
mq_attach+0x44/0xa0
qdisc_graft+0x20c/0x5cc
tc_modify_qdisc+0x1c4/0x664
rtnetlink_rcv_msg+0x354/0x440
netlink_rcv_skb+0x64/0x144
rtnetlink_rcv+0x28/0x34
netlink_unicast+0x1e8/0x2a4
netlink_sendmsg+0x308/0x4a0
sock_sendmsg+0x64/0xac
____sys_sendmsg+0x29c/0x358
___sys_sendmsg+0x90/0xd0
__sys_sendmsg+0x7c/0xd0
__arm64_sys_sendmsg+0x2c/0x38
invoke_syscall+0x54/0x114
el0_svc_common.constprop.1+0x90/0x174
do_el0_svc+0x3c/0xb0
el0_svc+0x24/0xec
el0t_64_sync_handler+0x90/0xb4
el0t_64_sync+0x174/0x178

This is because when mq is added for the first time, qdiscs in mq is set to NULL in mq_attach(). Therefore, when replacing mq after adding mq, we need to initialize qdiscs in the mq before continuing to graft. Otherwise, it will couse NULL pointer dereference issue in mq_attach(). And the same issue will occur in the attach functions of mqprio, taprio and htb. ffff:fff1 means that the repalce qdisc is ingress. Ingress does not allow any qdisc to be attached. Therefore, ffff:fff1 is incorrectly used, and the command should be dropped.

Fixes 6ec1c69a8f64 ("net_sched: add classful multiqueue dummy scheduler")

Signed-off-by Zhengchao Shao <[email protected]>

Tested-by Peilin Ye <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 net/sched/sch_api.c | 4 ++++
 1 file changed, 4 insertions(+)

net/sched/sch_api.c +4 -0

index 95f38595b0f7f..f6a7b876d5954 100644
@@ -1601,6 +1601,10 @@ static int tc_modify_qdisc(struct sk_buff *skb, struct nlmsghdr *n,
 					NL_SET_ERR_MSG(extack, "Qdisc parent/child loop detected");
 					return -ELOOP;
 				}
+				if (clid == TC_H_INGRESS) {
+					NL_SET_ERR_MSG(extack, "Ingress cannot graft directly");
+					return -EINVAL;
+				}
 				qdisc_refcount_inc(q);
 				goto graft;
 			} else {

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #40 lore raw

PATCH 40/225 net/netlink: fix NETLINK_LIST_MEMBERSHIPS length report

From: Pedro Tammela <[email protected]>

[ Upstream commit f4e4534850a9d18c250a93f8d7fbb51310828110 ]

The current code for the length calculation wrongly truncates the reported length of the groups array, causing an under report of the subscribed groups. To fix this, use 'BITS_TO_BYTES()' which rounds up the division by 8.

Fixes b42be38b2778 ("netlink: add API to retrieve all group memberships")

Signed-off-by Pedro Tammela <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 net/netlink/af_netlink.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

net/netlink/af_netlink.c +1 -1

index d1b19618890b7..6d493a0ccf399 100644
@@ -1768,7 +1768,7 @@ static int netlink_getsockopt(struct socket *sock, int level, int optname,
 				break;
 			}
 		}
-		if (put_user(ALIGN(nlk->ngroups / 8, sizeof(u32)), optlen))
+		if (put_user(ALIGN(BITS_TO_BYTES(nlk->ngroups), sizeof(u32)), optlen))
 			err = -EFAULT;
 		netlink_unlock_table();
 		return err;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #41 lore raw

PATCH 41/225 udp6: Fix race condition in udp6_sendmsg & connect

From: Vladislav Efanov <[email protected]>

[ Upstream commit 448a5ce1120c5bdbce1f1ccdabcd31c7d029f328 ]

Syzkaller got the following report:

BUG: KASAN: use-after-free in sk_setup_caps+0x621/0x690 net/core/sock.c:2018
Read of size 8 at addr ffff888027f82780 by task syz-executor276/3255

The function sk_setup_caps (called by ip6_sk_dst_store_flow-> ip6_dst_store) referenced already freed memory as this memory was freed by parallel task in udpv6_sendmsg->ip6_sk_dst_lookup_flow-> sk_dst_check.

The reason for this race condition is: sk_setup_caps() keeps using the dst after transferring the ownership to the dst cache.

Found by Linux Verification Center (linuxtesting.org) with syzkaller.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")

Signed-off-by Vladislav Efanov <[email protected]>

Signed-off-by Paolo Abeni <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/core/sock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

net/core/sock.c +1 -1

index eb0b76acd9df1..83f590d8d0850 100644
@@ -2370,7 +2370,6 @@ void sk_setup_caps(struct sock *sk, struct dst_entry *dst)
 {
 	u32 max_segs = 1;
 
-	sk_dst_set(sk, dst);
 	sk->sk_route_caps = dst->dev->features;
 	if (sk_is_tcp(sk))
 		sk->sk_route_caps |= NETIF_F_GSO;

@@ -2392,6 +2391,7 @@ void sk_setup_caps(struct sock *sk, struct dst_entry *dst)
 		}
 	}
 	sk->sk_gso_max_segs = max_segs;
+	sk_dst_set(sk, dst);
 }
 EXPORT_SYMBOL_GPL(sk_setup_caps);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #42 lore raw

PATCH 42/225 nfsd: fix double fget() bug in __write_ports_addfd()

From: Dan Carpenter <[email protected]>

[ Upstream commit c034203b6a9dae6751ef4371c18cb77983e30c28 ]

The bug here is that you cannot rely on getting the same socket from multiple calls to fget() because userspace can influence that. This is a kind of double fetch bug.

The fix is to delete the svc_alien_sock() function and instead do the checking inside the svc_addsock() function.

Fixes 3064639423c4 ("nfsd: check passed socket's net matches NFSd superblock's one")

Signed-off-by Dan Carpenter <[email protected]>

Reviewed-by NeilBrown <[email protected]>

Reviewed-by Jeff Layton <[email protected]>

Signed-off-by Chuck Lever <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/nfsd/nfsctl.c               |  7 +------
 include/linux/sunrpc/svcsock.h |  7 +++----
 net/sunrpc/svcsock.c           | 24 ++++++------------------
 3 files changed, 10 insertions(+), 28 deletions(-)

fs/nfsd/nfsctl.c +1 -6

index dc74a947a440c..573de0d49e172 100644
@@ -710,16 +710,11 @@ static ssize_t __write_ports_addfd(char *buf, struct net *net, const struct cred
 	if (err != 0 || fd < 0)
 		return -EINVAL;
 
-	if (svc_alien_sock(net, fd)) {
-		printk(KERN_ERR "%s: socket net is different to NFSd's one\n", __func__);
-		return -EINVAL;
-	}
-
 	err = nfsd_create_serv(net);
 	if (err != 0)
 		return err;
 
-	err = svc_addsock(nn->nfsd_serv, fd, buf, SIMPLE_TRANSACTION_LIMIT, cred);
+	err = svc_addsock(nn->nfsd_serv, net, fd, buf, SIMPLE_TRANSACTION_LIMIT, cred);
 
 	if (err >= 0 &&
 	    !nn->nfsd_serv->sv_nrthreads && !xchg(&nn->keep_active, 1))

include/linux/sunrpc/svcsock.h +3 -4

index bcc555c7ae9c6..13aff355d5a13 100644
@@ -59,10 +59,9 @@ int		svc_recv(struct svc_rqst *, long);
 int		svc_send(struct svc_rqst *);
 void		svc_drop(struct svc_rqst *);
 void		svc_sock_update_bufs(struct svc_serv *serv);
-bool		svc_alien_sock(struct net *net, int fd);
-int		svc_addsock(struct svc_serv *serv, const int fd,
-					char *name_return, const size_t len,
-					const struct cred *cred);
+int		svc_addsock(struct svc_serv *serv, struct net *net,
+			    const int fd, char *name_return, const size_t len,
+			    const struct cred *cred);
 void		svc_init_xprt_sock(void);
 void		svc_cleanup_xprt_sock(void);
 struct svc_xprt *svc_sock_create(struct svc_serv *serv, int prot);

net/sunrpc/svcsock.c +6 ~~-18~~

index 7107fbcbff343..d808c00cdbac1 100644
@@ -1338,25 +1338,10 @@ static struct svc_sock *svc_setup_socket(struct svc_serv *serv,
 	return svsk;
 }
 
-bool svc_alien_sock(struct net *net, int fd)
-{
-	int err;
-	struct socket *sock = sockfd_lookup(fd, &err);
-	bool ret = false;
-
-	if (!sock)
-		goto out;
-	if (sock_net(sock->sk) != net)
-		ret = true;
-	sockfd_put(sock);
-out:
-	return ret;
-}
-EXPORT_SYMBOL_GPL(svc_alien_sock);
-
 /**
  * svc_addsock - add a listener socket to an RPC service
  * @serv: pointer to RPC service to which to add a new listener
+ * @net: caller's network namespace
  * @fd: file descriptor of the new listener
  * @name_return: pointer to buffer to fill in with name of listener
  * @len: size of the buffer

@@ -1366,8 +1351,8 @@ EXPORT_SYMBOL_GPL(svc_alien_sock);
  * Name is terminated with '\n'.  On error, returns a negative errno
  * value.
  */
-int svc_addsock(struct svc_serv *serv, const int fd, char *name_return,
-		const size_t len, const struct cred *cred)
+int svc_addsock(struct svc_serv *serv, struct net *net, const int fd,
+		char *name_return, const size_t len, const struct cred *cred)
 {
 	int err = 0;
 	struct socket *so = sockfd_lookup(fd, &err);

@@ -1378,6 +1363,9 @@ int svc_addsock(struct svc_serv *serv, const int fd, char *name_return,
 
 	if (!so)
 		return err;
+	err = -EINVAL;
+	if (sock_net(so->sk) != net)
+		goto out;
 	err = -EAFNOSUPPORT;
 	if ((so->sk->sk_family != PF_INET) && (so->sk->sk_family != PF_INET6))
 		goto out;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #43 lore raw

PATCH 43/225 nvme: fix the name of Zone Append for verbose logging

From: Christoph Hellwig <[email protected]>

[ Upstream commit 856303797724d28f1d65b702f0eadcee1ea7abf5 ]

No Management involved in Zone Appened.

Fixes bd83fe6f2cd2 ("nvme: add verbose error logging")

Signed-off-by Christoph Hellwig <[email protected]>

Reviewed-by Alan Adamson <[email protected]>

Signed-off-by Keith Busch <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/nvme/host/constants.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/nvme/host/constants.c +1 -1

index e958d50155857..5766ceba2fec9 100644
@@ -21,7 +21,7 @@ static const char * const nvme_ops[] = {
 	[nvme_cmd_resv_release] = "Reservation Release",
 	[nvme_cmd_zone_mgmt_send] = "Zone Management Send",
 	[nvme_cmd_zone_mgmt_recv] = "Zone Management Receive",
-	[nvme_cmd_zone_append] = "Zone Management Append",
+	[nvme_cmd_zone_append] = "Zone Append",
 };
 
 static const char * const nvme_admin_ops[] = {

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #44 lore raw

PATCH 44/225 net/mlx5e: Fix error handling in mlx5e_refresh_tirs

From: Saeed Mahameed <[email protected]>

[ Upstream commit b6193d7030e3c59f1d4c75648c9c8fa40cad2bcd ]

Allocation failure is outside the critical lock section and should return immediately rather than jumping to the unlock section.

Also unlock as soon as required and remove the now redundant jump label.

Fixes 80a2a9026b24 ("net/mlx5e: Add a lock on tir list")

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/mellanox/mlx5/core/en_common.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

drivers/net/ethernet/mellanox/mlx5/core/en_common.c +4 -7

index 68f19324db93c..03a99918a8942 100644
@@ -139,10 +139,8 @@ int mlx5e_refresh_tirs(struct mlx5e_priv *priv, bool enable_uc_lb,
 
 	inlen = MLX5_ST_SZ_BYTES(modify_tir_in);
 	in = kvzalloc(inlen, GFP_KERNEL);
-	if (!in) {
-		err = -ENOMEM;
-		goto out;
-	}
+	if (!in)
+		return -ENOMEM;
 
 	if (enable_uc_lb)
 		lb_flags = MLX5_TIRC_SELF_LB_BLOCK_BLOCK_UNICAST;

@@ -160,14 +158,13 @@ int mlx5e_refresh_tirs(struct mlx5e_priv *priv, bool enable_uc_lb,
 		tirn = tir->tirn;
 		err = mlx5_core_modify_tir(mdev, tirn, in);
 		if (err)
-			goto out;
+			break;
 	}
+	mutex_unlock(&mdev->mlx5e_res.hw_objs.td.list_lock);
 
-out:
 	kvfree(in);
 	if (err)
 		netdev_err(priv->netdev, "refresh tir(0x%x) failed, %d\n", tirn, err);
-	mutex_unlock(&mdev->mlx5e_res.hw_objs.td.list_lock);
 
 	return err;
 }

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #45 lore raw

PATCH 45/225 net/mlx5: Read embedded cpu after init bit cleared

From: Moshe Shemesh <[email protected]>

[ Upstream commit bbfa4b58997e3d38ba629c9f6fc0bd1c163aaf43 ]

During driver load it reads embedded_cpu bit from initialization segment, but the initialization segment is readable only after initialization bit is cleared.

Move the call to mlx5_read_embedded_cpu() right after initialization bit cleared.

Signed-off-by Moshe Shemesh <[email protected]>

Fixes 591905ba9679 ("net/mlx5: Introduce Mellanox SmartNIC and modify page management logic")

Reviewed-by Shay Drory <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/mellanox/mlx5/core/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/net/ethernet/mellanox/mlx5/core/main.c +1 -1

index 1a06493da4121..077204929fe4a 100644
@@ -896,7 +896,6 @@ static int mlx5_pci_init(struct mlx5_core_dev *dev, struct pci_dev *pdev,
 	}
 
 	mlx5_pci_vsc_init(dev);
-	dev->caps.embedded_cpu = mlx5_read_embedded_cpu(dev);
 	return 0;
 
 err_clr_master:

@@ -1130,6 +1129,7 @@ static int mlx5_function_setup(struct mlx5_core_dev *dev, bool boot, u64 timeout
 		goto err_cmd_cleanup;
 	}
 
+	dev->caps.embedded_cpu = mlx5_read_embedded_cpu(dev);
 	mlx5_cmd_set_state(dev, MLX5_CMDIF_STATE_UP);
 
 	mlx5_start_health_poll(dev);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:38 UTC #46 lore raw

PATCH 46/225 iommu/mediatek: Flush IOTLB completely only if domain has been attached

From: Chen-Yu Tsai <[email protected]>

[ Upstream commit b3fc95709c54ffbe80f16801e0a792a4d2b3d55e ]

If an IOMMU domain was never attached, it lacks any linkage to the actual IOMMU hardware. Attempting to do flush_iotlb_all() on it will result in a NULL pointer dereference. This seems to happen after the recent IOMMU core rework in v6.4-rc1.

    Unable to handle kernel read from unreadable memory at virtual address 0000000000000018
    Call trace:
     mtk_iommu_flush_iotlb_all+0x20/0x80
     iommu_create_device_direct_mappings.part.0+0x13c/0x230
     iommu_setup_default_domain+0x29c/0x4d0
     iommu_probe_device+0x12c/0x190
     of_iommu_configure+0x140/0x208
     of_dma_configure_id+0x19c/0x3c0
     platform_dma_configure+0x38/0x88
     really_probe+0x78/0x2c0

Check if the "bank" field has been filled in before actually attempting the IOTLB flush to avoid it. The IOTLB is also flushed when the device comes out of runtime suspend, so it should have a clean initial state.

Fixes 08500c43d4f7 ("iommu/mediatek: Adjust the structure")

Signed-off-by Chen-Yu Tsai <[email protected]>

Reviewed-by Yong Wu <[email protected]>

Reviewed-by AngeloGioacchino Del Regno <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/iommu/mtk_iommu.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

drivers/iommu/mtk_iommu.c +2 -1

index e93ca9dc37c8e..2ae5a6058a34a 100644
@@ -737,7 +737,8 @@ static void mtk_iommu_flush_iotlb_all(struct iommu_domain *domain)
 {
 	struct mtk_iommu_domain *dom = to_mtk_domain(domain);
 
-	mtk_iommu_tlb_flush_all(dom->bank->parent_data);
+	if (dom->bank)
+		mtk_iommu_tlb_flush_all(dom->bank->parent_data);
 }
 
 static void mtk_iommu_iotlb_sync(struct iommu_domain *domain,

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #47 lore raw

PATCH 47/225 net/sched: flower: fix possible OOB write in fl_set_geneve_opt()

From: Hangyu Hua <[email protected]>

[ Upstream commit 4d56304e5827c8cc8cc18c75343d283af7c4825c ]

If we send two TCA_FLOWER_KEY_ENC_OPTS_GENEVE packets and their total size is 252 bytes(key->enc_opts.len = 252) then key->enc_opts.len = opt->length = data_len / 4 = 0 when the third TCA_FLOWER_KEY_ENC_OPTS_GENEVE packet enters fl_set_geneve_opt. This bypasses the next bounds check and results in an out-of-bounds.

Fixes 0a6e77784f49 ("net/sched: allow flower to match tunnel options")

Signed-off-by Hangyu Hua <[email protected]>

Reviewed-by Pieter Jansen van Vuuren <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Paolo Abeni <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/sched/cls_flower.c | 3 +++
 1 file changed, 3 insertions(+)

net/sched/cls_flower.c +3 -0

index 25bc57ee6ea10..3de72e7c1075a 100644
@@ -1147,6 +1147,9 @@ static int fl_set_geneve_opt(const struct nlattr *nla, struct fl_flow_key *key,
 	if (option_len > sizeof(struct geneve_opt))
 		data_len = option_len - sizeof(struct geneve_opt);
 
+	if (key->enc_opts.len > FLOW_DIS_TUN_OPTS_MAX - 4)
+		return -ERANGE;
+
 	opt = (struct geneve_opt *)&key->enc_opts.data[key->enc_opts.len];
 	memset(opt, 0xff, option_len);
 	opt->length = data_len / 4;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #48 lore raw

PATCH 48/225 tcp: fix mishandling when the sack compression is deferred.

Link https://lore.kernel.org/netdev/20230529113804.GA20300@didi-ThinkCentre-M920t-N000/ open here

From: fuyuanli <[email protected]>

[ Upstream commit 30c6f0bf9579debce27e45fac34fdc97e46acacc ]

In this patch, we mainly try to handle sending a compressed ack correctly if it's deferred.

Here are more details in the old logic:
When sack compression is triggered in the tcp_compressed_ack_kick(), if the sock is owned by user, it will set TCP_DELACK_TIMER_DEFERRED and then defer to the release cb phrase. Later once user releases the sock, tcp_delack_timer_handler() should send a ack as expected, which, however, cannot happen due to lack of ICSK_ACK_TIMER flag. Therefore, the receiver would not sent an ack until the sender's retransmission timeout. It definitely increases unnecessary latency.

Fixes 5d9f4262b7ea ("tcp: add SACK compression")

Signed-off-by fuyuanli <[email protected]>

Signed-off-by Jason Xing <[email protected]>

Reviewed-by Eric Dumazet <[email protected]>

Link https://lore.kernel.org/r/20230531080150.GA20424@didi-ThinkCentre-M920t-N000 open here

Signed-off-by Paolo Abeni <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 include/net/tcp.h    |  1 +
 net/ipv4/tcp_input.c |  2 +-
 net/ipv4/tcp_timer.c | 16 +++++++++++++---
 3 files changed, 15 insertions(+), 4 deletions(-)

include/net/tcp.h +1 -0

index 0744717f5caa7..5eedd476a38d7 100644
@@ -632,6 +632,7 @@ void tcp_reset(struct sock *sk, struct sk_buff *skb);
 void tcp_skb_mark_lost_uncond_verify(struct tcp_sock *tp, struct sk_buff *skb);
 void tcp_fin(struct sock *sk);
 void tcp_check_space(struct sock *sk);
+void tcp_sack_compress_send_ack(struct sock *sk);
 
 /* tcp_timer.c */
 void tcp_init_xmit_timers(struct sock *);

net/ipv4/tcp_input.c +1 -1

index ac44edd6f52e6..5dabb38b857ff 100644
@@ -4529,7 +4529,7 @@ static void tcp_sack_maybe_coalesce(struct tcp_sock *tp)
 	}
 }
 
-static void tcp_sack_compress_send_ack(struct sock *sk)
+void tcp_sack_compress_send_ack(struct sock *sk)
 {
 	struct tcp_sock *tp = tcp_sk(sk);

net/ipv4/tcp_timer.c +13 -3

index cb79127f45c34..0b5d0a2867a8c 100644
@@ -290,9 +290,19 @@ static int tcp_write_timeout(struct sock *sk)
 void tcp_delack_timer_handler(struct sock *sk)
 {
 	struct inet_connection_sock *icsk = inet_csk(sk);
+	struct tcp_sock *tp = tcp_sk(sk);
 
-	if (((1 << sk->sk_state) & (TCPF_CLOSE | TCPF_LISTEN)) ||
-	    !(icsk->icsk_ack.pending & ICSK_ACK_TIMER))
+	if ((1 << sk->sk_state) & (TCPF_CLOSE | TCPF_LISTEN))
+		return;
+
+	/* Handling the sack compression case */
+	if (tp->compressed_ack) {
+		tcp_mstamp_refresh(tp);
+		tcp_sack_compress_send_ack(sk);
+		return;
+	}
+
+	if (!(icsk->icsk_ack.pending & ICSK_ACK_TIMER))
 		return;
 
 	if (time_after(icsk->icsk_ack.timeout, jiffies)) {

@@ -312,7 +322,7 @@ void tcp_delack_timer_handler(struct sock *sk)
 			inet_csk_exit_pingpong_mode(sk);
 			icsk->icsk_ack.ato      = TCP_ATO_MIN;
 		}
-		tcp_mstamp_refresh(tcp_sk(sk));
+		tcp_mstamp_refresh(tp);
 		tcp_send_ack(sk);
 		__NET_INC_STATS(sock_net(sk), LINUX_MIB_DELAYEDACKS);
 	}

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #49 lore raw

PATCH 49/225 net: dsa: mv88e6xxx: Increase wait after reset deactivation

From: Andreas Svensson <[email protected]>

[ Upstream commit 3c27f3d53d588618d81d30d6712459a3cc9489b8 ]

A switch held in reset by default needs to wait longer until we can reliably detect it.

An issue was observed when testing on the Marvell 88E6393X (Link Street). The driver failed to detect the switch on some upstarts. Increasing the wait time after reset deactivation solves this issue.

The updated wait time is now also the same as the wait time in the mv88e6xxx_hardware_reset function.

Fixes 7b75e49de424 ("net: dsa: mv88e6xxx: wait after reset deactivation")

Signed-off-by Andreas Svensson <[email protected]>

Reviewed-by Andrew Lunn <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Paolo Abeni <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/dsa/mv88e6xxx/chip.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/net/dsa/mv88e6xxx/chip.c +1 -1

index a8ff6ee6d58e6..4db1652015d1d 100644
@@ -7067,7 +7067,7 @@ static int mv88e6xxx_probe(struct mdio_device *mdiodev)
 		goto out;
 	}
 	if (chip->reset)
-		usleep_range(1000, 2000);
+		usleep_range(10000, 20000);
 
 	/* Detect if the device is configured in single chip addressing mode,
 	 * otherwise continue with address specific smi init/detection.

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #50 lore raw

PATCH 50/225 mtd: rawnand: marvell: ensure timing values are written

Link https://lore.kernel.org/linux-mtd/[email protected] open here

From: Chris Packham <[email protected]>

[ Upstream commit 8a6f4d346f3bad9c68b4a87701eb3f7978542d57 ]

When new timing values are calculated in marvell_nfc_setup_interface() ensure that they will be applied in marvell_nfc_select_target() by clearing the selected_chip pointer.

Fixes b25251414f6e ("mtd: rawnand: marvell: Stop implementing ->select_chip()")

Signed-off-by Chris Packham <[email protected]>

Signed-off-by Miquel Raynal <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/mtd/nand/raw/marvell_nand.c | 6 ++++++
 1 file changed, 6 insertions(+)

drivers/mtd/nand/raw/marvell_nand.c +6 -0

index b9d1e96e33345..72069a8643563 100644
@@ -2449,6 +2449,12 @@ static int marvell_nfc_setup_interface(struct nand_chip *chip, int chipnr,
 			NDTR1_WAIT_MODE;
 	}
 
+	/*
+	 * Reset nfc->selected_chip so the next command will cause the timing
+	 * registers to be updated in marvell_nfc_select_target().
+	 */
+	nfc->selected_chip = NULL;
+
 	return 0;
 }

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #51 lore raw

PATCH 51/225 mtd: rawnand: marvell: dont set the NAND frequency select

Link https://lore.kernel.org/linux-mtd/[email protected] open here

From: Chris Packham <[email protected]>

[ Upstream commit c4d28e30a8d0b979e4029465ab8f312ab6ce2644 ]

marvell_nfc_setup_interface() uses the frequency retrieved from the clock associated with the nand interface to determine the timings that will be used. By changing the NAND frequency select without reflecting this in the clock configuration this means that the timings calculated don't correctly meet the requirements of the NAND chip. This hasn't been an issue up to now because of a different bug that was stopping the timings being updated after they were initially set.

Fixes b25251414f6e ("mtd: rawnand: marvell: Stop implementing ->select_chip()")

Signed-off-by Chris Packham <[email protected]>

Signed-off-by Miquel Raynal <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/mtd/nand/raw/marvell_nand.c | 4 ----
 1 file changed, 4 deletions(-)

drivers/mtd/nand/raw/marvell_nand.c +0 -4

index 72069a8643563..a57a1501449aa 100644
@@ -2891,10 +2891,6 @@ static int marvell_nfc_init(struct marvell_nfc *nfc)
 		regmap_update_bits(sysctrl_base, GENCONF_CLK_GATING_CTRL,
 				   GENCONF_CLK_GATING_CTRL_ND_GATE,
 				   GENCONF_CLK_GATING_CTRL_ND_GATE);
-
-		regmap_update_bits(sysctrl_base, GENCONF_ND_CLK_CTRL,
-				   GENCONF_ND_CLK_CTRL_EN,
-				   GENCONF_ND_CLK_CTRL_EN);
 	}
 
 	/* Configure the DMA if appropriate */

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #52 lore raw

PATCH 52/225 rtnetlink: call validate_linkmsg in rtnl_create_link

From: Xin Long <[email protected]>

commit b0ad3c179059089d809b477a1d445c1183a7b8fe upstream.

validate_linkmsg() was introduced by commit 1840bb13c22f5b ("[RTNL]:
Validate hardware and broadcast address attribute for RTM_NEWLINK") to validate tb[IFLA_ADDRESS/BROADCAST] for existing links. The same check should also be done for newly created links.

This patch adds validate_linkmsg() call in rtnl_create_link(), to avoid the invalid address set when creating some devices like:

  # ip link add dummy0 type dummy
  # ip link add link dummy0 name mac0 address 01:02 type macsec

Fixes 0e06877c6fdb ("[RTNETLINK]: rtnl_link: allow specifying initial device address")

Signed-off-by Xin Long <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/core/rtnetlink.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

net/core/rtnetlink.c +7 -1

@@ -3212,6 +3212,7 @@ struct net_device *rtnl_create_link(stru
 	struct net_device *dev;
 	unsigned int num_tx_queues = 1;
 	unsigned int num_rx_queues = 1;
+	int err;
 
 	if (tb[IFLA_NUM_TX_QUEUES])
 		num_tx_queues = nla_get_u32(tb[IFLA_NUM_TX_QUEUES]);

@@ -3247,13 +3248,18 @@ struct net_device *rtnl_create_link(stru
 	if (!dev)
 		return ERR_PTR(-ENOMEM);
 
+	err = validate_linkmsg(dev, tb, extack);
+	if (err < 0) {
+		free_netdev(dev);
+		return ERR_PTR(err);
+	}
+
 	dev_net_set(dev, net);
 	dev->rtnl_link_ops = ops;
 	dev->rtnl_link_state = RTNL_LINK_INITIALIZING;
 
 	if (tb[IFLA_MTU]) {
 		u32 mtu = nla_get_u32(tb[IFLA_MTU]);
-		int err;
 
 		err = dev_validate_mtu(dev, mtu, extack);
 		if (err) {

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #53 lore raw

PATCH 53/225 mptcp: avoid unneeded __mptcp_nmpc_socket() usage

From: Paolo Abeni <[email protected]>

[ Upstream commit 617612316953093bc859890e405e1b550c27d840 ]

In a few spots, the mptcp code invokes the __mptcp_nmpc_socket() helper multiple times under the same socket lock scope. Additionally, in such places, the socket status ensures that there is no MP capable handshake running.

Under the above condition we can replace the later __mptcp_nmpc_socket() helper invocation with direct access to the msk->subflow pointer and better document such access is not supposed to fail with WARN().

Signed-off-by Paolo Abeni <[email protected]>

Reviewed-by Matthieu Baerts <[email protected]>

Signed-off-by Matthieu Baerts <[email protected]>

Stable-dep-of: 5b825727d087 ("mptcp: add annotations around msk->subflow accesses")

Signed-off-by Sasha Levin <[email protected]>

---
 net/mptcp/protocol.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

net/mptcp/protocol.c +6 -3

index ea46a5cb1c30f..fecee0a850d65 100644
@@ -3172,7 +3172,7 @@ static struct sock *mptcp_accept(struct sock *sk, int flags, int *err,
 	struct socket *listener;
 	struct sock *newsk;
 
-	listener = __mptcp_nmpc_socket(msk);
+	listener = msk->subflow;
 	if (WARN_ON_ONCE(!listener)) {
 		*err = -EINVAL;
 		return NULL;

@@ -3398,7 +3398,7 @@ static int mptcp_get_port(struct sock *sk, unsigned short snum)
 	struct mptcp_sock *msk = mptcp_sk(sk);
 	struct socket *ssock;
 
-	ssock = __mptcp_nmpc_socket(msk);
+	ssock = msk->subflow;
 	pr_debug("msk=%p, subflow=%p", msk, ssock);
 	if (WARN_ON_ONCE(!ssock))
 		return -EINVAL;

@@ -3746,7 +3746,10 @@ static int mptcp_stream_accept(struct socket *sock, struct socket *newsock,
 
 	pr_debug("msk=%p", msk);
 
-	ssock = __mptcp_nmpc_socket(msk);
+	/* buggy applications can call accept on socket states other then LISTEN
+	 * but no need to allocate the first subflow just to error out.
+	 */
+	ssock = msk->subflow;
 	if (!ssock)
 		return -EINVAL;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #54 lore raw

PATCH 54/225 mptcp: add annotations around msk->subflow accesses

From: Paolo Abeni <[email protected]>

[ Upstream commit 5b825727d0871b23e8867f6371183e61628b4a26 ]

The MPTCP can access the first subflow socket in a few spots outside the socket lock scope. That is actually safe, as MPTCP will delete the socket itself only after the msk sock close().

Still the such accesses causes a few KCSAN splats, as reported by Christoph. Silence the harmless warning adding a few annotation around the relevant accesses.

Fixes 71ba088ce0aa ("mptcp: cleanup accept and poll")

Reported-by Christoph Paasch <[email protected]>

Closes https://github.com/multipath-tcp/mptcp_net-next/issues/402

Signed-off-by Paolo Abeni <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/mptcp/protocol.c | 18 ++++++++++--------
 net/mptcp/protocol.h |  6 +++++-
 2 files changed, 15 insertions(+), 9 deletions(-)

net/mptcp/protocol.c +10 -8

index fecee0a850d65..efe372ff389d4 100644
@@ -112,7 +112,7 @@ static int __mptcp_socket_create(struct mptcp_sock *msk)
 		return err;
 
 	msk->first = ssock->sk;
-	msk->subflow = ssock;
+	WRITE_ONCE(msk->subflow, ssock);
 	subflow = mptcp_subflow_ctx(ssock->sk);
 	list_add(&subflow->node, &msk->conn_list);
 	sock_hold(ssock->sk);

@@ -2269,7 +2269,7 @@ static void mptcp_dispose_initial_subflow(struct mptcp_sock *msk)
 {
 	if (msk->subflow) {
 		iput(SOCK_INODE(msk->subflow));
-		msk->subflow = NULL;
+		WRITE_ONCE(msk->subflow, NULL);
 	}
 }

@@ -3115,7 +3115,7 @@ struct sock *mptcp_sk_clone(const struct sock *sk,
 	msk = mptcp_sk(nsk);
 	msk->local_key = subflow_req->local_key;
 	msk->token = subflow_req->token;
-	msk->subflow = NULL;
+	WRITE_ONCE(msk->subflow, NULL);
 	msk->in_accept_queue = 1;
 	WRITE_ONCE(msk->fully_established, false);
 	if (mp_opt->suboptions & OPTION_MPTCP_CSUMREQD)

@@ -3172,7 +3172,7 @@ static struct sock *mptcp_accept(struct sock *sk, int flags, int *err,
 	struct socket *listener;
 	struct sock *newsk;
 
-	listener = msk->subflow;
+	listener = READ_ONCE(msk->subflow);
 	if (WARN_ON_ONCE(!listener)) {
 		*err = -EINVAL;
 		return NULL;

@@ -3746,10 +3746,10 @@ static int mptcp_stream_accept(struct socket *sock, struct socket *newsock,
 
 	pr_debug("msk=%p", msk);
 
-	/* buggy applications can call accept on socket states other then LISTEN
+	/* Buggy applications can call accept on socket states other then LISTEN
 	 * but no need to allocate the first subflow just to error out.
 	 */
-	ssock = msk->subflow;
+	ssock = READ_ONCE(msk->subflow);
 	if (!ssock)
 		return -EINVAL;

@@ -3822,10 +3822,12 @@ static __poll_t mptcp_poll(struct file *file, struct socket *sock,
 	state = inet_sk_state_load(sk);
 	pr_debug("msk=%p state=%d flags=%lx", msk, state, msk->flags);
 	if (state == TCP_LISTEN) {
-		if (WARN_ON_ONCE(!msk->subflow || !msk->subflow->sk))
+		struct socket *ssock = READ_ONCE(msk->subflow);
+
+		if (WARN_ON_ONCE(!ssock || !ssock->sk))
 			return 0;
 
-		return inet_csk_listen_poll(msk->subflow->sk);
+		return inet_csk_listen_poll(ssock->sk);
 	}
 
 	if (state != TCP_SYN_SENT && state != TCP_SYN_RECV) {

net/mptcp/protocol.h +5 -1

index 441feeaeb2427..822fd749f5690 100644
@@ -297,7 +297,11 @@ struct mptcp_sock {
 	struct list_head rtx_queue;
 	struct mptcp_data_frag *first_pending;
 	struct list_head join_list;
-	struct socket	*subflow; /* outgoing connect/listener/!mp_capable */
+	struct socket	*subflow; /* outgoing connect/listener/!mp_capable
+				   * The mptcp ops can safely dereference, using suitable
+				   * ONCE annotation, the subflow outside the socket
+				   * lock as such sock is freed after close().
+				   */
 	struct sock	*first;
 	struct mptcp_pm_data	pm;
 	struct {

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #55 lore raw

PATCH 55/225 mptcp: avoid unneeded address copy

From: Paolo Abeni <[email protected]>

[ Upstream commit 2bb9a37f0e194ed95c70603b0efc7898a5a0d9b4 ]

In the syn_recv fallback path, the msk is unused. We can skip setting the socket address.

Signed-off-by Paolo Abeni <[email protected]>

Reviewed-by Matthieu Baerts <[email protected]>

Signed-off-by Matthieu Baerts <[email protected]>

Stable-dep-of: 7e8b88ec35ee ("mptcp: consolidate passive msk socket initialization")

Signed-off-by Sasha Levin <[email protected]>

---
 net/mptcp/subflow.c | 2 --
 1 file changed, 2 deletions(-)

net/mptcp/subflow.c +0 -2

index 67ddbf6f2e4ee..4995a6281ea16 100644
@@ -759,8 +759,6 @@ static struct sock *subflow_syn_recv_sock(const struct sock *sk,
 				goto dispose_child;
 			}
 
-			if (new_msk)
-				mptcp_copy_inaddrs(new_msk, child);
 			mptcp_subflow_drop_ctx(child);
 			goto out;
 		}

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #56 lore raw

PATCH 56/225 mptcp: simplify subflow_syn_recv_sock()

Link https://github.com/multipath-tcp/mptcp_net-next/issues/61

From: Paolo Abeni <[email protected]>

[ Upstream commit a88d0092b24b8cddce57fe0e88e60a9e29e0b515 ]

Postpone the msk cloning to the child process creation so that we can avoid a bunch of conditionals.

Signed-off-by Paolo Abeni <[email protected]>

Reviewed-by Matthieu Baerts <[email protected]>

Signed-off-by Matthieu Baerts <[email protected]>

Stable-dep-of: 7e8b88ec35ee ("mptcp: consolidate passive msk socket initialization")

Signed-off-by Sasha Levin <[email protected]>

---
 net/mptcp/subflow.c | 41 +++++++++++++----------------------------
 1 file changed, 13 insertions(+), 28 deletions(-)

net/mptcp/subflow.c +13 ~~-28~~

index 4995a6281ea16..276e62003631e 100644
@@ -633,14 +633,6 @@ static bool subflow_hmac_valid(const struct request_sock *req,
 	return !crypto_memneq(hmac, mp_opt->hmac, MPTCPOPT_HMAC_LEN);
 }
 
-static void mptcp_force_close(struct sock *sk)
-{
-	/* the msk is not yet exposed to user-space, and refcount is 2 */
-	inet_sk_state_store(sk, TCP_CLOSE);
-	sk_common_release(sk);
-	sock_put(sk);
-}
-
 static void subflow_ulp_fallback(struct sock *sk,
 				 struct mptcp_subflow_context *old_ctx)
 {

@@ -693,7 +685,6 @@ static struct sock *subflow_syn_recv_sock(const struct sock *sk,
 	struct mptcp_subflow_request_sock *subflow_req;
 	struct mptcp_options_received mp_opt;
 	bool fallback, fallback_is_fatal;
-	struct sock *new_msk = NULL;
 	struct mptcp_sock *owner;
 	struct sock *child;

@@ -722,14 +713,9 @@ static struct sock *subflow_syn_recv_sock(const struct sock *sk,
 		 * options.
 		 */
 		mptcp_get_options(skb, &mp_opt);
-		if (!(mp_opt.suboptions & OPTIONS_MPTCP_MPC)) {
+		if (!(mp_opt.suboptions & OPTIONS_MPTCP_MPC))
 			fallback = true;
-			goto create_child;
-		}
 
-		new_msk = mptcp_sk_clone(listener->conn, &mp_opt, req);
-		if (!new_msk)
-			fallback = true;
 	} else if (subflow_req->mp_join) {
 		mptcp_get_options(skb, &mp_opt);
 		if (!(mp_opt.suboptions & OPTIONS_MPTCP_MPJ) ||

@@ -758,21 +744,23 @@ static struct sock *subflow_syn_recv_sock(const struct sock *sk,
 				subflow_add_reset_reason(skb, MPTCP_RST_EMPTCP);
 				goto dispose_child;
 			}
-
-			mptcp_subflow_drop_ctx(child);
-			goto out;
+			goto fallback;
 		}
 
 		/* ssk inherits options of listener sk */
 		ctx->setsockopt_seq = listener->setsockopt_seq;
 
 		if (ctx->mp_capable) {
-			owner = mptcp_sk(new_msk);
+			ctx->conn = mptcp_sk_clone(listener->conn, &mp_opt, req);
+			if (!ctx->conn)
+				goto fallback;
+
+			owner = mptcp_sk(ctx->conn);
 
 			/* this can't race with mptcp_close(), as the msk is
 			 * not yet exposted to user-space
 			 */
-			inet_sk_state_store((void *)new_msk, TCP_ESTABLISHED);
+			inet_sk_state_store(ctx->conn, TCP_ESTABLISHED);
 
 			/* record the newly created socket as the first msk
 			 * subflow, but don't link it yet into conn_list

@@ -782,11 +770,9 @@ static struct sock *subflow_syn_recv_sock(const struct sock *sk,
 			/* new mpc subflow takes ownership of the newly
 			 * created mptcp socket
 			 */
-			mptcp_sk(new_msk)->setsockopt_seq = ctx->setsockopt_seq;
+			owner->setsockopt_seq = ctx->setsockopt_seq;
 			mptcp_pm_new_connection(owner, child, 1);
 			mptcp_token_accept(subflow_req, owner);
-			ctx->conn = new_msk;
-			new_msk = NULL;
 
 			/* set msk addresses early to ensure mptcp_pm_get_local_id()
 			 * uses the correct data

@@ -836,11 +822,6 @@ static struct sock *subflow_syn_recv_sock(const struct sock *sk,
 		}
 	}
 
-out:
-	/* dispose of the left over mptcp master, if any */
-	if (unlikely(new_msk))
-		mptcp_force_close(new_msk);
-
 	/* check for expected invariant - should never trigger, just help
 	 * catching eariler subtle bugs
 	 */

@@ -858,6 +839,10 @@ static struct sock *subflow_syn_recv_sock(const struct sock *sk,
 
 	/* The last child reference will be released by the caller */
 	return child;
+
+fallback:
+	mptcp_subflow_drop_ctx(child);
+	return child;
 }
 
 static struct inet_connection_sock_af_ops subflow_specific __ro_after_init;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #57 lore raw

PATCH 57/225 mptcp: consolidate passive msk socket initialization

From: Paolo Abeni <[email protected]>

[ Upstream commit 7e8b88ec35eef363040e08d99536d2bebef83774 ]

When the msk socket is cloned at MPC handshake time, a few fields are initialized in a racy way outside mptcp_sk_clone() and the msk socket lock.

The above is due historical reasons: before commit a88d0092b24b ("mptcp: simplify subflow_syn_recv_sock()") as the first subflow socket carrying all the needed date was not available yet at msk creation time

We can now refactor the code moving the missing initialization bit under the socket lock, removing the init race and avoiding some code duplication.

This will also simplify the next patch, as all msk->first write access are now under the msk socket lock.

Fixes 0397c6d85f9c ("mptcp: keep unaccepted MPC subflow into join list")

Signed-off-by Paolo Abeni <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/mptcp/protocol.c | 35 ++++++++++++++++++++++++++++-------
 net/mptcp/protocol.h |  8 ++++----
 net/mptcp/subflow.c  | 28 +---------------------------
 3 files changed, 33 insertions(+), 38 deletions(-)

net/mptcp/protocol.c +28 -7

index efe372ff389d4..6f6b65d3eed1a 100644
@@ -3017,7 +3017,7 @@ static void mptcp_close(struct sock *sk, long timeout)
 	sock_put(sk);
 }
 
-void mptcp_copy_inaddrs(struct sock *msk, const struct sock *ssk)
+static void mptcp_copy_inaddrs(struct sock *msk, const struct sock *ssk)
 {
 #if IS_ENABLED(CONFIG_MPTCP_IPV6)
 	const struct ipv6_pinfo *ssk6 = inet6_sk(ssk);

@@ -3093,9 +3093,10 @@ static struct ipv6_pinfo *mptcp_inet6_sk(const struct sock *sk)
 }
 #endif
 
-struct sock *mptcp_sk_clone(const struct sock *sk,
-			    const struct mptcp_options_received *mp_opt,
-			    struct request_sock *req)
+struct sock *mptcp_sk_clone_init(const struct sock *sk,
+				 const struct mptcp_options_received *mp_opt,
+				 struct sock *ssk,
+				 struct request_sock *req)
 {
 	struct mptcp_subflow_request_sock *subflow_req = mptcp_subflow_rsk(req);
 	struct sock *nsk = sk_clone_lock(sk, GFP_ATOMIC);

@@ -3137,10 +3138,30 @@ struct sock *mptcp_sk_clone(const struct sock *sk,
 	}
 
 	sock_reset_flag(nsk, SOCK_RCU_FREE);
-	/* will be fully established after successful MPC subflow creation */
-	inet_sk_state_store(nsk, TCP_SYN_RECV);
-
 	security_inet_csk_clone(nsk, req);
+
+	/* this can't race with mptcp_close(), as the msk is
+	 * not yet exposted to user-space
+	 */
+	inet_sk_state_store(nsk, TCP_ESTABLISHED);
+
+	/* The msk maintain a ref to each subflow in the connections list */
+	WRITE_ONCE(msk->first, ssk);
+	list_add(&mptcp_subflow_ctx(ssk)->node, &msk->conn_list);
+	sock_hold(ssk);
+
+	/* new mpc subflow takes ownership of the newly
+	 * created mptcp socket
+	 */
+	mptcp_token_accept(subflow_req, msk);
+
+	/* set msk addresses early to ensure mptcp_pm_get_local_id()
+	 * uses the correct data
+	 */
+	mptcp_copy_inaddrs(nsk, ssk);
+	mptcp_propagate_sndbuf(nsk, ssk);
+
+	mptcp_rcv_space_init(msk, ssk);
 	bh_unlock_sock(nsk);
 
 	/* note: the newly allocated socket refcount is 2 now */

net/mptcp/protocol.h +4 -4

index 822fd749f5690..4a2f6e29211a1 100644
@@ -606,7 +606,6 @@ int mptcp_is_checksum_enabled(const struct net *net);
 int mptcp_allow_join_id0(const struct net *net);
 unsigned int mptcp_stale_loss_cnt(const struct net *net);
 int mptcp_get_pm_type(const struct net *net);
-void mptcp_copy_inaddrs(struct sock *msk, const struct sock *ssk);
 void mptcp_subflow_fully_established(struct mptcp_subflow_context *subflow,
 				     struct mptcp_options_received *mp_opt);
 bool __mptcp_retransmit_pending_data(struct sock *sk);

@@ -675,9 +674,10 @@ void __init mptcp_proto_init(void);
 int __init mptcp_proto_v6_init(void);
 #endif
 
-struct sock *mptcp_sk_clone(const struct sock *sk,
-			    const struct mptcp_options_received *mp_opt,
-			    struct request_sock *req);
+struct sock *mptcp_sk_clone_init(const struct sock *sk,
+				 const struct mptcp_options_received *mp_opt,
+				 struct sock *ssk,
+				 struct request_sock *req);
 void mptcp_get_options(const struct sk_buff *skb,
 		       struct mptcp_options_received *mp_opt);

net/mptcp/subflow.c +1 ~~-27~~

index 276e62003631e..336878f8a222a 100644
@@ -751,38 +751,12 @@ static struct sock *subflow_syn_recv_sock(const struct sock *sk,
 		ctx->setsockopt_seq = listener->setsockopt_seq;
 
 		if (ctx->mp_capable) {
-			ctx->conn = mptcp_sk_clone(listener->conn, &mp_opt, req);
+			ctx->conn = mptcp_sk_clone_init(listener->conn, &mp_opt, child, req);
 			if (!ctx->conn)
 				goto fallback;
 
 			owner = mptcp_sk(ctx->conn);
-
-			/* this can't race with mptcp_close(), as the msk is
-			 * not yet exposted to user-space
-			 */
-			inet_sk_state_store(ctx->conn, TCP_ESTABLISHED);
-
-			/* record the newly created socket as the first msk
-			 * subflow, but don't link it yet into conn_list
-			 */
-			WRITE_ONCE(owner->first, child);
-
-			/* new mpc subflow takes ownership of the newly
-			 * created mptcp socket
-			 */
-			owner->setsockopt_seq = ctx->setsockopt_seq;
 			mptcp_pm_new_connection(owner, child, 1);
-			mptcp_token_accept(subflow_req, owner);
-
-			/* set msk addresses early to ensure mptcp_pm_get_local_id()
-			 * uses the correct data
-			 */
-			mptcp_copy_inaddrs(ctx->conn, child);
-			mptcp_propagate_sndbuf(ctx->conn, child);
-
-			mptcp_rcv_space_init(owner, child);
-			list_add(&ctx->node, &owner->conn_list);
-			sock_hold(child);
 
 			/* with OoO packets we can reach here without ingress
 			 * mpc option

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #58 lore raw

PATCH 58/225 mptcp: fix data race around msk->first access

From: Paolo Abeni <[email protected]>

[ Upstream commit 1b1b43ee7a208096ecd79e626f2fc90d4a321111 ]

The first subflow socket is accessed outside the msk socket lock by mptcp_subflow_fail(), we need to annotate each write access with WRITE_ONCE, but a few spots still lacks it.

Fixes 76a13b315709 ("mptcp: invoke MP_FAIL response when needed")

Signed-off-by Paolo Abeni <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/mptcp/protocol.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

net/mptcp/protocol.c +3 -3

index 6f6b65d3eed1a..f4206001e2fe5 100644
@@ -111,7 +111,7 @@ static int __mptcp_socket_create(struct mptcp_sock *msk)
 	if (err)
 		return err;
 
-	msk->first = ssock->sk;
+	WRITE_ONCE(msk->first, ssock->sk);
 	WRITE_ONCE(msk->subflow, ssock);
 	subflow = mptcp_subflow_ctx(ssock->sk);
 	list_add(&subflow->node, &msk->conn_list);

@@ -2405,7 +2405,7 @@ static void __mptcp_close_ssk(struct sock *sk, struct sock *ssk,
 	sock_put(ssk);
 
 	if (ssk == msk->first)
-		msk->first = NULL;
+		WRITE_ONCE(msk->first, NULL);
 
 out:
 	if (ssk == msk->last_snd)

@@ -2706,7 +2706,7 @@ static int __mptcp_init_sock(struct sock *sk)
 	WRITE_ONCE(msk->rmem_released, 0);
 	msk->timer_ival = TCP_RTO_MIN;
 
-	msk->first = NULL;
+	WRITE_ONCE(msk->first, NULL);
 	inet_csk(sk)->icsk_sync_mss = mptcp_sync_mss;
 	WRITE_ONCE(msk->csum_enabled, mptcp_is_checksum_enabled(sock_net(sk)));
 	WRITE_ONCE(msk->allow_infinite_fallback, true);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #59 lore raw

PATCH 59/225 mptcp: add annotations around sk->sk_shutdown accesses

From: Paolo Abeni <[email protected]>

[ Upstream commit 6b9831bfd9322b297eb6d44257808cc055fdc586 ]

Christoph reported the mptcp variant of a recently addressed plain TCP issue. Similar to commit e14cadfd80d7 ("tcp: add annotations around sk->sk_shutdown accesses") add READ/WRITE ONCE annotations to silence KCSAN reports around lockless sk_shutdown access.

Fixes 71ba088ce0aa ("mptcp: cleanup accept and poll")

Reported-by Christoph Paasch <[email protected]>

Closes https://github.com/multipath-tcp/mptcp_net-next/issues/401

Signed-off-by Paolo Abeni <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/mptcp/protocol.c | 29 ++++++++++++++++-------------
 1 file changed, 16 insertions(+), 13 deletions(-)

net/mptcp/protocol.c +16 ~~-13~~

index f4206001e2fe5..c25796eacd95f 100644
@@ -599,7 +599,7 @@ static bool mptcp_check_data_fin(struct sock *sk)
 		WRITE_ONCE(msk->ack_seq, msk->ack_seq + 1);
 		WRITE_ONCE(msk->rcv_data_fin, 0);
 
-		sk->sk_shutdown |= RCV_SHUTDOWN;
+		WRITE_ONCE(sk->sk_shutdown, sk->sk_shutdown | RCV_SHUTDOWN);
 		smp_mb__before_atomic(); /* SHUTDOWN must be visible first */
 
 		switch (sk->sk_state) {

@@ -906,7 +906,7 @@ static void mptcp_check_for_eof(struct mptcp_sock *msk)
 		/* hopefully temporary hack: propagate shutdown status
 		 * to msk, when all subflows agree on it
 		 */
-		sk->sk_shutdown |= RCV_SHUTDOWN;
+		WRITE_ONCE(sk->sk_shutdown, sk->sk_shutdown | RCV_SHUTDOWN);
 
 		smp_mb__before_atomic(); /* SHUTDOWN must be visible first */
 		sk->sk_data_ready(sk);

@@ -2512,7 +2512,7 @@ static void mptcp_check_fastclose(struct mptcp_sock *msk)
 	}
 
 	inet_sk_state_store(sk, TCP_CLOSE);
-	sk->sk_shutdown = SHUTDOWN_MASK;
+	WRITE_ONCE(sk->sk_shutdown, SHUTDOWN_MASK);
 	smp_mb__before_atomic(); /* SHUTDOWN must be visible first */
 	set_bit(MPTCP_WORK_CLOSE_SUBFLOW, &msk->flags);

@@ -2941,7 +2941,7 @@ bool __mptcp_close(struct sock *sk, long timeout)
 	bool do_cancel_work = false;
 	int subflows_alive = 0;
 
-	sk->sk_shutdown = SHUTDOWN_MASK;
+	WRITE_ONCE(sk->sk_shutdown, SHUTDOWN_MASK);
 
 	if ((1 << sk->sk_state) & (TCPF_LISTEN | TCPF_CLOSE)) {
 		inet_sk_state_store(sk, TCP_CLOSE);

@@ -3079,7 +3079,7 @@ static int mptcp_disconnect(struct sock *sk, int flags)
 	mptcp_pm_data_reset(msk);
 	mptcp_ca_reset(sk);
 
-	sk->sk_shutdown = 0;
+	WRITE_ONCE(sk->sk_shutdown, 0);
 	sk_error_report(sk);
 	return 0;
 }

@@ -3815,9 +3815,6 @@ static __poll_t mptcp_check_writeable(struct mptcp_sock *msk)
 {
 	struct sock *sk = (struct sock *)msk;
 
-	if (unlikely(sk->sk_shutdown & SEND_SHUTDOWN))
-		return EPOLLOUT | EPOLLWRNORM;
-
 	if (sk_stream_is_writeable(sk))
 		return EPOLLOUT | EPOLLWRNORM;

@@ -3835,6 +3832,7 @@ static __poll_t mptcp_poll(struct file *file, struct socket *sock,
 	struct sock *sk = sock->sk;
 	struct mptcp_sock *msk;
 	__poll_t mask = 0;
+	u8 shutdown;
 	int state;
 
 	msk = mptcp_sk(sk);

@@ -3851,17 +3849,22 @@ static __poll_t mptcp_poll(struct file *file, struct socket *sock,
 		return inet_csk_listen_poll(ssock->sk);
 	}
 
+	shutdown = READ_ONCE(sk->sk_shutdown);
+	if (shutdown == SHUTDOWN_MASK || state == TCP_CLOSE)
+		mask |= EPOLLHUP;
+	if (shutdown & RCV_SHUTDOWN)
+		mask |= EPOLLIN | EPOLLRDNORM | EPOLLRDHUP;
+
 	if (state != TCP_SYN_SENT && state != TCP_SYN_RECV) {
 		mask |= mptcp_check_readable(msk);
-		mask |= mptcp_check_writeable(msk);
+		if (shutdown & SEND_SHUTDOWN)
+			mask |= EPOLLOUT | EPOLLWRNORM;
+		else
+			mask |= mptcp_check_writeable(msk);
 	} else if (state == TCP_SYN_SENT && inet_sk(sk)->defer_connect) {
 		/* cf tcp_poll() note about TFO */
 		mask |= EPOLLOUT | EPOLLWRNORM;
 	}
-	if (sk->sk_shutdown == SHUTDOWN_MASK || state == TCP_CLOSE)
-		mask |= EPOLLHUP;
-	if (sk->sk_shutdown & RCV_SHUTDOWN)
-		mask |= EPOLLIN | EPOLLRDNORM | EPOLLRDHUP;
 
 	/* This barrier is coupled with smp_wmb() in __mptcp_error_report() */
 	smp_rmb();

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #60 lore raw

PATCH 60/225 drm/amdgpu: release gpu full access after "amdgpu_device_ip_late_init"

From: Chong Li <[email protected]>

[ Upstream commit 38eecbe086a4e52f54b2bbda8feba65d44addbef ]

[WHY]
Function "amdgpu_irq_update()" called by "amdgpu_device_ip_late_init()" is an atomic context. We shouldn't access registers through KIQ since "msleep()" may be called in "amdgpu_kiq_rreg()".

[HOW]
Move function "amdgpu_virt_release_full_gpu()" after function "amdgpu_device_ip_late_init()", to ensure that registers be accessed through RLCG instead of KIQ.

Call Trace:
  <TASK>
  show_stack+0x52/0x69
  dump_stack_lvl+0x49/0x6d
  dump_stack+0x10/0x18
  __schedule_bug.cold+0x4f/0x6b
  __schedule+0x473/0x5d0
  ? __wake_up_klogd.part.0+0x40/0x70
  ? vprintk_emit+0xbe/0x1f0
  schedule+0x68/0x110
  schedule_timeout+0x87/0x160
  ? timer_migration_handler+0xa0/0xa0
  msleep+0x2d/0x50
  amdgpu_kiq_rreg+0x18d/0x1f0 [amdgpu]
  amdgpu_device_rreg.part.0+0x59/0xd0 [amdgpu]
  amdgpu_device_rreg+0x3a/0x50 [amdgpu]
  amdgpu_sriov_rreg+0x3c/0xb0 [amdgpu]
  gfx_v10_0_set_gfx_eop_interrupt_state.constprop.0+0x16c/0x190 [amdgpu]
  gfx_v10_0_set_eop_interrupt_state+0xa5/0xb0 [amdgpu]
  amdgpu_irq_update+0x53/0x80 [amdgpu]
  amdgpu_irq_get+0x7c/0xb0 [amdgpu]
  amdgpu_fence_driver_hw_init+0x58/0x90 [amdgpu]
  amdgpu_device_init.cold+0x16b7/0x2022 [amdgpu]

Signed-off-by Chong Li <[email protected]>

Reviewed-by [email protected]

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 32 ++++++++++++----------
 1 file changed, 17 insertions(+), 15 deletions(-)

drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +17 ~~-15~~

index 011e4fbe27f10..c83df8b78b7de 100644
@@ -2512,8 +2512,6 @@ static int amdgpu_device_ip_init(struct amdgpu_device *adev)
 	amdgpu_fru_get_product_info(adev);
 
 init_failed:
-	if (amdgpu_sriov_vf(adev))
-		amdgpu_virt_release_full_gpu(adev, true);
 
 	return r;
 }

@@ -3838,18 +3836,6 @@ int amdgpu_device_init(struct amdgpu_device *adev,
 
 	r = amdgpu_device_ip_init(adev);
 	if (r) {
-		/* failed in exclusive mode due to timeout */
-		if (amdgpu_sriov_vf(adev) &&
-		    !amdgpu_sriov_runtime(adev) &&
-		    amdgpu_virt_mmio_blocked(adev) &&
-		    !amdgpu_virt_wait_reset(adev)) {
-			dev_err(adev->dev, "VF exclusive mode timeout\n");
-			/* Don't send request since VF is inactive. */
-			adev->virt.caps &= ~AMDGPU_SRIOV_CAPS_RUNTIME;
-			adev->virt.ops = NULL;
-			r = -EAGAIN;
-			goto release_ras_con;
-		}
 		dev_err(adev->dev, "amdgpu_device_ip_init failed\n");
 		amdgpu_vf_error_put(adev, AMDGIM_ERROR_VF_AMDGPU_INIT_FAIL, 0, 0);
 		goto release_ras_con;

@@ -3921,8 +3907,10 @@ int amdgpu_device_init(struct amdgpu_device *adev,
 				   msecs_to_jiffies(AMDGPU_RESUME_MS));
 	}
 
-	if (amdgpu_sriov_vf(adev))
+	if (amdgpu_sriov_vf(adev)) {
+		amdgpu_virt_release_full_gpu(adev, true);
 		flush_delayed_work(&adev->delayed_init_work);
+	}
 
 	r = sysfs_create_files(&adev->dev->kobj, amdgpu_dev_attributes);
 	if (r)

@@ -3962,6 +3950,20 @@ int amdgpu_device_init(struct amdgpu_device *adev,
 	return 0;
 
 release_ras_con:
+	if (amdgpu_sriov_vf(adev))
+		amdgpu_virt_release_full_gpu(adev, true);
+
+	/* failed in exclusive mode due to timeout */
+	if (amdgpu_sriov_vf(adev) &&
+		!amdgpu_sriov_runtime(adev) &&
+		amdgpu_virt_mmio_blocked(adev) &&
+		!amdgpu_virt_wait_reset(adev)) {
+		dev_err(adev->dev, "VF exclusive mode timeout\n");
+		/* Don't send request since VF is inactive. */
+		adev->virt.caps &= ~AMDGPU_SRIOV_CAPS_RUNTIME;
+		adev->virt.ops = NULL;
+		r = -EAGAIN;
+	}
 	amdgpu_release_ras_context(adev);
 
 failed:

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #61 lore raw

PATCH 61/225 watchdog: menz069_wdt: fix watchdog initialisation

From: Johannes Thumshirn <[email protected]>

[ Upstream commit 87b22656ca6a896d0378e9e60ffccb0c82f48b08 ]

Doing a 'cat /dev/watchdog0' with menz069_wdt as watchdog0 will result in a NULL pointer dereference.

This happens because we're passing the wrong pointer to watchdog_register_device(). Fix this by getting rid of the static watchdog_device structure and use the one embedded into the driver's per-instance private data.

Signed-off-by Johannes Thumshirn <[email protected]>

Reviewed-by Guenter Roeck <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Guenter Roeck <[email protected]>

Signed-off-by Wim Van Sebroeck <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/watchdog/menz69_wdt.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

drivers/watchdog/menz69_wdt.c +6 ~~-10~~

index 8973f98bc6a56..bca0938f3429f 100644
@@ -98,14 +98,6 @@ static const struct watchdog_ops men_z069_ops = {
 	.set_timeout = men_z069_wdt_set_timeout,
 };
 
-static struct watchdog_device men_z069_wdt = {
-	.info = &men_z069_info,
-	.ops = &men_z069_ops,
-	.timeout = MEN_Z069_DEFAULT_TIMEOUT,
-	.min_timeout = 1,
-	.max_timeout = MEN_Z069_WDT_COUNTER_MAX / MEN_Z069_TIMER_FREQ,
-};
-
 static int men_z069_probe(struct mcb_device *dev,
 			  const struct mcb_device_id *id)
 {

@@ -125,15 +117,19 @@ static int men_z069_probe(struct mcb_device *dev,
 		goto release_mem;
 
 	drv->mem = mem;
+	drv->wdt.info = &men_z069_info;
+	drv->wdt.ops = &men_z069_ops;
+	drv->wdt.timeout = MEN_Z069_DEFAULT_TIMEOUT;
+	drv->wdt.min_timeout = 1;
+	drv->wdt.max_timeout = MEN_Z069_WDT_COUNTER_MAX / MEN_Z069_TIMER_FREQ;
 
-	drv->wdt = men_z069_wdt;
 	watchdog_init_timeout(&drv->wdt, 0, &dev->dev);
 	watchdog_set_nowayout(&drv->wdt, nowayout);
 	watchdog_set_drvdata(&drv->wdt, drv);
 	drv->wdt.parent = &dev->dev;
 	mcb_set_drvdata(dev, drv);
 
-	return watchdog_register_device(&men_z069_wdt);
+	return watchdog_register_device(&drv->wdt);
 
 release_mem:
 	mcb_release_mem(mem);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #62 lore raw

PATCH 62/225 ALSA: hda: Glenfly: add HD Audio PCI IDs and HDMI Codec Vendor IDs.

From: jasontao <[email protected]>

[ Upstream commit c51e431052e2eacfb23fbf6b39bc6c8770d9827a ]

Add a set of HD Audio PCI IDS, and the HDMI codec vendor IDs for Glenfly Gpus.

- In default_bdl_pos_adj, set bdl to 128 as Glenfly Gpus have hardware limitation, need to increase hdac interrupt interval.
- In azx_first_init, enable polling mode for Glenfly Gpu. When the codec complete the command, it sends interrupt and writes response entries to memory, howerver, the write requests sometimes are not actually synchronized to memory when driver handle hdac interrupt on Glenfly Gpus. If the RIRB status is not updated in the interrupt handler, azx_rirb_get_response keeps trying to recevie a response from rirb until 1s timeout. Enabling polling mode for Glenfly Gpu can fix the issue.
- In patch_gf_hdmi, set Glenlfy Gpu Codec's no_sticky_stream as it need driver to do actual clean-ups for the linked codec when switch from one codec to another.

Signed-off-by jasontao <[email protected]>

Signed-off-by Reaper Li <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 sound/pci/hda/hda_intel.c  | 21 +++++++++++++++++++++
 sound/pci/hda/patch_hdmi.c | 22 ++++++++++++++++++++++
 2 files changed, 43 insertions(+)

sound/pci/hda/hda_intel.c +21 -0

index 881b2f3a1551f..3226691ac923c 100644
@@ -227,6 +227,7 @@ enum {
 	AZX_DRIVER_ATI,
 	AZX_DRIVER_ATIHDMI,
 	AZX_DRIVER_ATIHDMI_NS,
+	AZX_DRIVER_GFHDMI,
 	AZX_DRIVER_VIA,
 	AZX_DRIVER_SIS,
 	AZX_DRIVER_ULI,

@@ -349,6 +350,7 @@ static const char * const driver_short_names[] = {
 	[AZX_DRIVER_ATI] = "HDA ATI SB",
 	[AZX_DRIVER_ATIHDMI] = "HDA ATI HDMI",
 	[AZX_DRIVER_ATIHDMI_NS] = "HDA ATI HDMI",
+	[AZX_DRIVER_GFHDMI] = "HDA GF HDMI",
 	[AZX_DRIVER_VIA] = "HDA VIA VT82xx",
 	[AZX_DRIVER_SIS] = "HDA SIS966",
 	[AZX_DRIVER_ULI] = "HDA ULI M5461",

@@ -1743,6 +1745,12 @@ static int default_bdl_pos_adj(struct azx *chip)
 	}
 
 	switch (chip->driver_type) {
+	/*
+	 * increase the bdl size for Glenfly Gpus for hardware
+	 * limitation on hdac interrupt interval
+	 */
+	case AZX_DRIVER_GFHDMI:
+		return 128;
 	case AZX_DRIVER_ICH:
 	case AZX_DRIVER_PCH:
 		return 1;

@@ -1858,6 +1866,12 @@ static int azx_first_init(struct azx *chip)
 		pci_write_config_dword(pci, PCI_BASE_ADDRESS_1, 0);
 	}
 #endif
+	/*
+	 * Fix response write request not synced to memory when handle
+	 * hdac interrupt on Glenfly Gpus
+	 */
+	if (chip->driver_type == AZX_DRIVER_GFHDMI)
+		bus->polling_mode = 1;
 
 	err = pcim_iomap_regions(pci, 1 << 0, "ICH HD audio");
 	if (err < 0)

@@ -1959,6 +1973,7 @@ static int azx_first_init(struct azx *chip)
 			chip->playback_streams = ATIHDMI_NUM_PLAYBACK;
 			chip->capture_streams = ATIHDMI_NUM_CAPTURE;
 			break;
+		case AZX_DRIVER_GFHDMI:
 		case AZX_DRIVER_GENERIC:
 		default:
 			chip->playback_streams = ICH6_NUM_PLAYBACK;

@@ -2727,6 +2742,12 @@ static const struct pci_device_id azx_ids[] = {
 	{ PCI_DEVICE(0x1002, 0xab38),
 	  .driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI_NS |
 	  AZX_DCAPS_PM_RUNTIME },
+	/* GLENFLY */
+	{ PCI_DEVICE(0x6766, PCI_ANY_ID),
+	  .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
+	  .class_mask = 0xffffff,
+	  .driver_data = AZX_DRIVER_GFHDMI | AZX_DCAPS_POSFIX_LPIB |
+	  AZX_DCAPS_NO_MSI | AZX_DCAPS_NO_64BIT },
 	/* VIA VT8251/VT8237A */
 	{ PCI_DEVICE(0x1106, 0x3288), .driver_data = AZX_DRIVER_VIA },
 	/* VIA GFX VT7122/VX900 */

sound/pci/hda/patch_hdmi.c +22 -0

index be2c6cff77011..7b5e09070ab9b 100644
@@ -4489,6 +4489,22 @@ static int patch_via_hdmi(struct hda_codec *codec)
 	return patch_simple_hdmi(codec, VIAHDMI_CVT_NID, VIAHDMI_PIN_NID);
 }
 
+static int patch_gf_hdmi(struct hda_codec *codec)
+{
+	int err;
+
+	err = patch_generic_hdmi(codec);
+	if (err)
+		return err;
+
+	/*
+	 * Glenfly GPUs have two codecs, stream switches from one codec to
+	 * another, need to do actual clean-ups in codec_cleanup_stream
+	 */
+	codec->no_sticky_stream = 1;
+	return 0;
+}
+
 /*
  * patch entries
  */

@@ -4584,6 +4600,12 @@ HDA_CODEC_ENTRY(0x10de00a6, "GPU a6 HDMI/DP",	patch_nvhdmi),
 HDA_CODEC_ENTRY(0x10de00a7, "GPU a7 HDMI/DP",	patch_nvhdmi),
 HDA_CODEC_ENTRY(0x10de8001, "MCP73 HDMI",	patch_nvhdmi_2ch),
 HDA_CODEC_ENTRY(0x10de8067, "MCP67/68 HDMI",	patch_nvhdmi_2ch),
+HDA_CODEC_ENTRY(0x67663d82, "Arise 82 HDMI/DP",	patch_gf_hdmi),
+HDA_CODEC_ENTRY(0x67663d83, "Arise 83 HDMI/DP",	patch_gf_hdmi),
+HDA_CODEC_ENTRY(0x67663d84, "Arise 84 HDMI/DP",	patch_gf_hdmi),
+HDA_CODEC_ENTRY(0x67663d85, "Arise 85 HDMI/DP",	patch_gf_hdmi),
+HDA_CODEC_ENTRY(0x67663d86, "Arise 86 HDMI/DP",	patch_gf_hdmi),
+HDA_CODEC_ENTRY(0x67663d87, "Arise 87 HDMI/DP",	patch_gf_hdmi),
 HDA_CODEC_ENTRY(0x11069f80, "VX900 HDMI/DP",	patch_via_hdmi),
 HDA_CODEC_ENTRY(0x11069f81, "VX900 HDMI/DP",	patch_via_hdmi),
 HDA_CODEC_ENTRY(0x11069f84, "VX11 HDMI/DP",	patch_generic_hdmi),

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #63 lore raw

PATCH 63/225 LoongArch: Relay BCE exceptions to userland as SIGSEGV with si_code=SEGV_BNDERR

From: WANG Xuerui <[email protected]>

[ Upstream commit c23e7f01cf621290770069d968ca4c8356a50d00 ]

SEGV_BNDERR was introduced initially for supporting the Intel MPX, but fell into disuse after the MPX support was removed. The LoongArch bounds-checking instructions behave very differently than MPX, but overall the interface is still kind of suitable for conveying the information to userland when bounds-checking assertions trigger, so we wouldn't have to invent more UAPI. Specifically, when the BCE triggers, a SEGV_BNDERR is sent to userland, with si_addr set to the out-of-bounds address or value (in asrt{gt,le}'s case), and one of si_lower or si_upper set to the configured bound depending on the faulting instruction. The other bound is set to either 0 or ULONG_MAX to resemble a range with both lower and upper bounds.

Note that it is possible to have si_addr == si_lower in case of a failing asrtgt or {ld,st}gt, because those instructions test for strict greater-than relationship. This should not pose a problem for userland, though, because the faulting PC is available for the application to associate back to the exact instruction for figuring out the expectation.

Example exception context generated by a faulting asrtgt.d t0, t1 (assert t0 > t1 or BCE) with t0=100 and t1=200:

Quoted 8 lines

pc 00005555558206a4 ra 00007ffff2d854fc tp 00007ffff2f2f180 sp 00007ffffbf9fb80 a0 0000000000000002 a1 00007ffffbf9fce8 a2 00007ffffbf9fd00 a3 00007ffff2ed4558 a4 0000000000000000 a5 00007ffff2f044c8 a6 00007ffffbf9fce0 a7 fffffffffffff000 t0 0000000000000064 t1 00000000000000c8 t2 00007ffffbfa2d5e t3 00007ffff2f12aa0 t4 00007ffff2ed6158 t5 00007ffff2ed6158 t6 000000000000002e t7 0000000003d8f538 t8 0000000000000005 u0 0000000000000000 s9 0000000000000000 s0 00007ffffbf9fce8 s1 0000000000000002 s2 0000000000000000 s3 00007ffff2f2c038 s4 0000555555820610 s5 00007ffff2ed5000 s6 0000555555827e38 s7 00007ffffbf9fd00 s8 0000555555827e38

Quoted 8 lines

ra: 00007ffff2d854fc
ERA: 00005555558206a4
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000007 (PPLV3 +PIE -PWE)
EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
ECFG: 0007181c (LIE=2-4,11-12 VS=7)
ESTAT: 000a0000 [BCE] (IS= ECode=10 EsubCode=0)
PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)

Signed-off-by WANG Xuerui <[email protected]>

Signed-off-by Huacai Chen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 arch/loongarch/include/asm/inst.h | 26 +++++++++
 arch/loongarch/kernel/genex.S     |  1 +
 arch/loongarch/kernel/traps.c     | 92 +++++++++++++++++++++++++++++++
 3 files changed, 119 insertions(+)

arch/loongarch/include/asm/inst.h +26 -0

index fce1843ceebb3..d476a88b9616c 100644
@@ -105,6 +105,8 @@ enum reg2bstrd_op {
 };
 
 enum reg3_op {
+	asrtle_op	= 0x02,
+	asrtgt_op	= 0x03,
 	addw_op		= 0x20,
 	addd_op		= 0x21,
 	subw_op		= 0x22,

@@ -156,6 +158,30 @@ enum reg3_op {
 	amord_op	= 0x70c7,
 	amxorw_op	= 0x70c8,
 	amxord_op	= 0x70c9,
+	fldgts_op	= 0x70e8,
+	fldgtd_op	= 0x70e9,
+	fldles_op	= 0x70ea,
+	fldled_op	= 0x70eb,
+	fstgts_op	= 0x70ec,
+	fstgtd_op	= 0x70ed,
+	fstles_op	= 0x70ee,
+	fstled_op	= 0x70ef,
+	ldgtb_op	= 0x70f0,
+	ldgth_op	= 0x70f1,
+	ldgtw_op	= 0x70f2,
+	ldgtd_op	= 0x70f3,
+	ldleb_op	= 0x70f4,
+	ldleh_op	= 0x70f5,
+	ldlew_op	= 0x70f6,
+	ldled_op	= 0x70f7,
+	stgtb_op	= 0x70f8,
+	stgth_op	= 0x70f9,
+	stgtw_op	= 0x70fa,
+	stgtd_op	= 0x70fb,
+	stleb_op	= 0x70fc,
+	stleh_op	= 0x70fd,
+	stlew_op	= 0x70fe,
+	stled_op	= 0x70ff,
 };
 
 enum reg3sa2_op {

arch/loongarch/kernel/genex.S +1 -0

index 75e5be807a0d5..42ff28eadf04d 100644
@@ -79,6 +79,7 @@ SYM_FUNC_END(except_vec_cex)
 
 	BUILD_HANDLER ade ade badv
 	BUILD_HANDLER ale ale badv
+	BUILD_HANDLER bce bce none
 	BUILD_HANDLER bp bp none
 	BUILD_HANDLER fpe fpe fcsr
 	BUILD_HANDLER fpu fpu none

arch/loongarch/kernel/traps.c +92 -0

116 lines not on this page · raw message

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #64 lore raw

PATCH 64/225 ASoC: Intel: soc-acpi-cht: Add quirk for Nextbook Ares 8A tablet

From: Hans de Goede <[email protected]>

[ Upstream commit ec6f82b4c63cc68f8dc03316e725106d242706be ]

The Nextbook Ares 8A tablet which has Android as factory OS, has a buggy DSDT with both ESSX8316 and 10EC5651 ACPI devices.

This tablet actually uses an rt5651 codec, but the matching code ends up picking the ESSX8316 device, add a quirk to ignote the ESSX8316 device on this tablet.

Acked-by Pierre-Louis Bossart <[email protected]>

Message-Id: <[email protected]>

Signed-off-by Mark Brown <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 .../intel/common/soc-acpi-intel-cht-match.c   | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

sound/soc/intel/common/soc-acpi-intel-cht-match.c +26 -0

index 6beb00858c33f..cdcbf04b8832f 100644
@@ -50,6 +50,31 @@ static struct snd_soc_acpi_mach *cht_quirk(void *arg)
 		return mach;
 }
 
+/*
+ * Some tablets with Android factory OS have buggy DSDTs with an ESSX8316 device
+ * in the ACPI tables. While they are not using an ESS8316 codec. These DSDTs
+ * also have an ACPI device for the correct codec, ignore the ESSX8316.
+ */
+static const struct dmi_system_id cht_ess8316_not_present_table[] = {
+	{
+		/* Nextbook Ares 8A */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "CherryTrail"),
+			DMI_MATCH(DMI_BIOS_VERSION, "M882"),
+		},
+	},
+	{ }
+};
+
+static struct snd_soc_acpi_mach *cht_ess8316_quirk(void *arg)
+{
+	if (dmi_check_system(cht_ess8316_not_present_table))
+		return NULL;
+
+	return arg;
+}
+
 static const struct snd_soc_acpi_codecs rt5640_comp_ids = {
 	.num_codecs = 2,
 	.codecs = { "10EC5640", "10EC3276" },

@@ -113,6 +138,7 @@ struct snd_soc_acpi_mach  snd_soc_acpi_intel_cherrytrail_machines[] = {
 		.drv_name = "bytcht_es8316",
 		.fw_filename = "intel/fw_sst_22a8.bin",
 		.board = "bytcht_es8316",
+		.machine_quirk = cht_ess8316_quirk,
 		.sof_tplg_filename = "sof-cht-es8316.tplg",
 	},
 	/* some CHT-T platforms rely on RT5640, use Baytrail machine driver */

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #65 lore raw

PATCH 65/225 drm/amdgpu: Use the default reset when loading or reloading the driver

From: lyndonli <[email protected]>

[ Upstream commit 4eea7fb980dc44545a32eec92e2662053b34cd9d ]

Below call trace and errors are observed when reloading amdgpu driver with the module parameter reset_method=3.

It should do a default reset when loading or reloading the driver, regardless of the module parameter reset_method.

v2: add comments inside and modify commit messages.

[ +2.180243] [drm] psp gfx command ID_LOAD_TOC(0x20) failed and response status is (0x0)

[  +0.000011] [drm:psp_hw_start [amdgpu]] *ERROR* Failed to load toc
[  +0.000890] [drm:psp_hw_start [amdgpu]] *ERROR* PSP tmr init failed!
[  +0.020683] [drm:amdgpu_fill_buffer [amdgpu]] *ERROR* Trying to
clear memory with ring turned off.
[  +0.000003] RIP: 0010:amdgpu_bo_release_notify+0x1ef/0x210 [amdgpu]
[  +0.000004] Call Trace:
[  +0.000003]  <TASK>
[  +0.000008]  ttm_bo_release+0x2c4/0x330 [amdttm]
[  +0.000026]  amdttm_bo_put+0x3c/0x70 [amdttm]
[  +0.000020]  amdgpu_bo_free_kernel+0xe6/0x140 [amdgpu]
[  +0.000728]  psp_v11_0_ring_destroy+0x34/0x60 [amdgpu]
[  +0.000826]  psp_hw_init+0xe7/0x2f0 [amdgpu]
[  +0.000813]  amdgpu_device_fw_loading+0x1ad/0x2d0 [amdgpu]
[  +0.000731]  amdgpu_device_init.cold+0x108e/0x2002 [amdgpu]
[  +0.001071]  ? do_pci_enable_device+0xe1/0x110
[  +0.000011]  amdgpu_driver_load_kms+0x1a/0x160 [amdgpu]
[  +0.000729]  amdgpu_pci_probe+0x179/0x3a0 [amdgpu]

Signed-off-by lyndonli <[email protected]>

Signed-off-by Yunxiang Li <[email protected]>

Reviewed-by Feifei Xu <[email protected]>

Reviewed-by Kenneth Feng <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 7 +++++++
 1 file changed, 7 insertions(+)

drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +7 -0

index c83df8b78b7de..9556df0dfefad 100644
@@ -3555,6 +3555,7 @@ int amdgpu_device_init(struct amdgpu_device *adev,
 	int r, i;
 	bool px = false;
 	u32 max_MBps;
+	int tmp;
 
 	adev->shutdown = false;
 	adev->flags = flags;

@@ -3776,7 +3777,13 @@ int amdgpu_device_init(struct amdgpu_device *adev,
 				}
 			}
 		} else {
+			tmp = amdgpu_reset_method;
+			/* It should do a default reset when loading or reloading the driver,
+			 * regardless of the module parameter reset_method.
+			 */
+			amdgpu_reset_method = AMD_RESET_METHOD_NONE;
 			r = amdgpu_asic_reset(adev);
+			amdgpu_reset_method = tmp;
 			if (r) {
 				dev_err(adev->dev, "asic reset on init failed\n");
 				goto failed;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #66 lore raw

PATCH 66/225 mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write()

From: Lee Jones <[email protected]>

[ Upstream commit 2d1e952a2b8e5e92d8d55ac88a7cf7ca5ea591ad ]

If a user can make copy_from_user() fail, there is a potential for UAF/DF due to a lack of locking around the allocation, use and freeing of the data buffers.

This issue is not theoretical. I managed to author a POC for it:

    BUG: KASAN: double-free in kfree+0x5c/0xac
    Free of addr ffff29280be5de00 by task poc/356
    CPU: 1 PID: 356 Comm: poc Not tainted 6.1.0-00001-g961aa6552c04-dirty #20
    Hardware name: linux,dummy-virt (DT)
    Call trace:
     dump_backtrace.part.0+0xe0/0xf0
     show_stack+0x18/0x40
     dump_stack_lvl+0x64/0x80
     print_report+0x188/0x48c
     kasan_report_invalid_free+0xa0/0xc0
     ____kasan_slab_free+0x174/0x1b0
     __kasan_slab_free+0x18/0x24
     __kmem_cache_free+0x130/0x2e0
     kfree+0x5c/0xac
     mbox_test_message_write+0x208/0x29c
     full_proxy_write+0x90/0xf0
     vfs_write+0x154/0x440
     ksys_write+0xcc/0x180
     __arm64_sys_write+0x44/0x60
     invoke_syscall+0x60/0x190
     el0_svc_common.constprop.0+0x7c/0x160
     do_el0_svc+0x40/0xf0
     el0_svc+0x2c/0x6c
     el0t_64_sync_handler+0xf4/0x120
     el0t_64_sync+0x18c/0x190

    Allocated by task 356:
     kasan_save_stack+0x3c/0x70
     kasan_set_track+0x2c/0x40
     kasan_save_alloc_info+0x24/0x34
     __kasan_kmalloc+0xb8/0xc0
     kmalloc_trace+0x58/0x70
     mbox_test_message_write+0x6c/0x29c
     full_proxy_write+0x90/0xf0
     vfs_write+0x154/0x440
     ksys_write+0xcc/0x180
     __arm64_sys_write+0x44/0x60
     invoke_syscall+0x60/0x190
     el0_svc_common.constprop.0+0x7c/0x160
     do_el0_svc+0x40/0xf0
     el0_svc+0x2c/0x6c
     el0t_64_sync_handler+0xf4/0x120
     el0t_64_sync+0x18c/0x190

    Freed by task 357:
     kasan_save_stack+0x3c/0x70
     kasan_set_track+0x2c/0x40
     kasan_save_free_info+0x38/0x5c
     ____kasan_slab_free+0x13c/0x1b0
     __kasan_slab_free+0x18/0x24
     __kmem_cache_free+0x130/0x2e0
     kfree+0x5c/0xac
     mbox_test_message_write+0x208/0x29c
     full_proxy_write+0x90/0xf0
     vfs_write+0x154/0x440
     ksys_write+0xcc/0x180
     __arm64_sys_write+0x44/0x60
     invoke_syscall+0x60/0x190
     el0_svc_common.constprop.0+0x7c/0x160
     do_el0_svc+0x40/0xf0
     el0_svc+0x2c/0x6c
     el0t_64_sync_handler+0xf4/0x120
     el0t_64_sync+0x18c/0x190

Signed-off-by Lee Jones <[email protected]>

Signed-off-by Jassi Brar <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/mailbox/mailbox-test.c | 7 +++++++
 1 file changed, 7 insertions(+)

drivers/mailbox/mailbox-test.c +7 -0

index 4555d678fadda..6dd5b9614452b 100644
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/mailbox_client.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/poll.h>

@@ -38,6 +39,7 @@ struct mbox_test_device {
 	char			*signal;
 	char			*message;
 	spinlock_t		lock;
+	struct mutex		mutex;
 	wait_queue_head_t	waitq;
 	struct fasync_struct	*async_queue;
 	struct dentry		*root_debugfs_dir;

@@ -110,6 +112,8 @@ static ssize_t mbox_test_message_write(struct file *filp,
 		return -EINVAL;
 	}
 
+	mutex_lock(&tdev->mutex);
+
 	tdev->message = kzalloc(MBOX_MAX_MSG_LEN, GFP_KERNEL);
 	if (!tdev->message)
 		return -ENOMEM;

@@ -144,6 +148,8 @@ static ssize_t mbox_test_message_write(struct file *filp,
 	kfree(tdev->message);
 	tdev->signal = NULL;
 
+	mutex_unlock(&tdev->mutex);
+
 	return ret < 0 ? ret : count;
 }

@@ -392,6 +398,7 @@ static int mbox_test_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, tdev);
 
 	spin_lock_init(&tdev->lock);
+	mutex_init(&tdev->mutex);
 
 	if (tdev->rx_channel) {
 		tdev->rx_buffer = devm_kzalloc(&pdev->dev,

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #67 lore raw

PATCH 67/225 drm/ast: Fix ARM compatibility

Link https://patchwork.freedesktop.org/patch/msgid/[email protected]

From: Jammy Huang <[email protected]>

[ Upstream commit 4327a6137ed43a091d900b1ac833345d60f32228 ]

ARM architecture only has 'memory', so all devices are accessed by MMIO if possible.

Signed-off-by Jammy Huang <[email protected]>

Reviewed-by Thomas Zimmermann <[email protected]>

Signed-off-by Thomas Zimmermann <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/gpu/drm/ast/ast_main.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

drivers/gpu/drm/ast/ast_main.c +5 -4

index 067453266897f..5df527051177a 100644
@@ -427,11 +427,12 @@ struct ast_private *ast_device_create(const struct drm_driver *drv,
 		return ERR_PTR(-EIO);
 
 	/*
-	 * If we don't have IO space at all, use MMIO now and
-	 * assume the chip has MMIO enabled by default (rev 0x20
-	 * and higher).
+	 * After AST2500, MMIO is enabled by default, and it should be adopted
+	 * to be compatible with Arm.
 	 */
-	if (!(pci_resource_flags(pdev, 2) & IORESOURCE_IO)) {
+	if (pdev->revision >= 0x40) {
+		ast->ioregs = ast->regs + AST_IO_MM_OFFSET;
+	} else if (!(pci_resource_flags(pdev, 2) & IORESOURCE_IO)) {
 		drm_info(dev, "platform has no IO space, trying MMIO\n");
 		ast->ioregs = ast->regs + AST_IO_MM_OFFSET;
 	}

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #68 lore raw

PATCH 68/225 btrfs: abort transaction when sibling keys check fails for leaves

From: Filipe Manana <[email protected]>

[ Upstream commit 9ae5afd02a03d4e22a17a9609b19400b77c36273 ]

If the sibling keys check fails before we move keys from one sibling leaf to another, we are not aborting the transaction - we leave that to some higher level caller of btrfs_search_slot() (or anything else that uses it to insert items into a b+tree).

This means that the transaction abort will provide a stack trace that omits the b+tree modification call chain. So change this to immediately abort the transaction and therefore get a more useful stack trace that shows us the call chain in the bt+tree modification code.

It's also important to immediately abort the transaction just in case some higher level caller is not doing it, as this indicates a very serious corruption and we should stop the possibility of doing further damage.

Reviewed-by Qu Wenruo <[email protected]>

Signed-off-by Filipe Manana <[email protected]>

Reviewed-by David Sterba <[email protected]>

Signed-off-by David Sterba <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/btrfs/ctree.c | 2 ++
 1 file changed, 2 insertions(+)

fs/btrfs/ctree.c +2 -0

index dbbae92ac23d8..ab9f8d6c4f1b9 100644
@@ -3118,6 +3118,7 @@ static int push_leaf_right(struct btrfs_trans_handle *trans, struct btrfs_root
 
 	if (check_sibling_keys(left, right)) {
 		ret = -EUCLEAN;
+		btrfs_abort_transaction(trans, ret);
 		btrfs_tree_unlock(right);
 		free_extent_buffer(right);
 		return ret;

@@ -3348,6 +3349,7 @@ static int push_leaf_left(struct btrfs_trans_handle *trans, struct btrfs_root
 
 	if (check_sibling_keys(left, right)) {
 		ret = -EUCLEAN;
+		btrfs_abort_transaction(trans, ret);
 		goto out;
 	}
 	return __push_leaf_left(path, min_data_size,

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #69 lore raw

PATCH 69/225 ARM: 9295/1: unwind:fix unwind abort for uleb128 case

From: Haibo Li <[email protected]>

[ Upstream commit fa3eeb638de0c1a9d2d860e5b48259facdd65176 ]

When unwind instruction is 0xb2,the subsequent instructions are uleb128 bytes.
For now,it uses only the first uleb128 byte in code.

For vsp increments of 0x204~0x400,use one uleb128 byte like below:
0xc06a00e4 <unwind_test_work>: 0x80b27fac
Compact model index: 0
0xb2 0x7f vsp = vsp + 1024
0xac pop {r4, r5, r6, r7, r8, r14}

For vsp increments larger than 0x400,use two uleb128 bytes like below:
0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
Compact model index: 1
0xb2 0x81 0x01 vsp = vsp + 1032
0xac pop {r4, r5, r6, r7, r8, r14}
The unwind works well since the decoded uleb128 byte is also 0x81.

For vsp increments larger than 0x600,use two uleb128 bytes like below:
0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
Compact model index: 1
0xb2 0x81 0x02 vsp = vsp + 1544
0xac pop {r4, r5, r6, r7, r8, r14}
In this case,the decoded uleb128 result is 0x101(vsp=0x204+(0x101<<2)). While the uleb128 used in code is 0x81(vsp=0x204+(0x81<<2)). The unwind aborts at this frame since it gets incorrect vsp.

To fix this,add uleb128 decode to cover all the above case.

Signed-off-by Haibo Li <[email protected]>

Reviewed-by Linus Walleij <[email protected]>

Reviewed-by Alexandre Mergnat <[email protected]>

Reviewed-by AngeloGioacchino Del Regno <[email protected]>

Signed-off-by Russell King (Oracle) <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 arch/arm/kernel/unwind.c | 25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

arch/arm/kernel/unwind.c +24 -1

index a37ea6c772cd5..2e6aa5dc15bf3 100644
@@ -307,6 +307,29 @@ static int unwind_exec_pop_subset_r0_to_r3(struct unwind_ctrl_block *ctrl,
 	return URC_OK;
 }
 
+static unsigned long unwind_decode_uleb128(struct unwind_ctrl_block *ctrl)
+{
+	unsigned long bytes = 0;
+	unsigned long insn;
+	unsigned long result = 0;
+
+	/*
+	 * unwind_get_byte() will advance `ctrl` one instruction at a time, so
+	 * loop until we get an instruction byte where bit 7 is not set.
+	 *
+	 * Note: This decodes a maximum of 4 bytes to output 28 bits data where
+	 * max is 0xfffffff: that will cover a vsp increment of 1073742336, hence
+	 * it is sufficient for unwinding the stack.
+	 */
+	do {
+		insn = unwind_get_byte(ctrl);
+		result |= (insn & 0x7f) << (bytes * 7);
+		bytes++;
+	} while (!!(insn & 0x80) && (bytes != sizeof(result)));
+
+	return result;
+}
+
 /*
  * Execute the current unwind instruction.
  */

@@ -360,7 +383,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 		if (ret)
 			goto error;
 	} else if (insn == 0xb2) {
-		unsigned long uleb128 = unwind_get_byte(ctrl);
+		unsigned long uleb128 = unwind_decode_uleb128(ctrl);
 
 		ctrl->vrs[SP] += 0x204 + (uleb128 << 2);
 	} else {

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:39 UTC #70 lore raw

PATCH 70/225 hwmon: (k10temp) Add PCI ID for family 19, model 78h

From: Mario Limonciello <[email protected]>

[ Upstream commit 7d8accfaa0ab65e4282c8e58950f7d688342cd86 ]

Enable k10temp on this system.

[ bp: Massage. ]

Signed-off-by Mario Limonciello <[email protected]>

Signed-off-by Borislav Petkov (AMD) <[email protected]>

Acked-by Guenter Roeck <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/hwmon/k10temp.c | 1 +
 1 file changed, 1 insertion(+)

drivers/hwmon/k10temp.c +1 -0

index be8bbb1c3a02d..823d0ca1d6059 100644
@@ -507,6 +507,7 @@ static const struct pci_device_id k10temp_id_table[] = {
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M50H_DF_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M60H_DF_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M70H_DF_F3) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M78H_DF_F3) },
 	{ PCI_VDEVICE(HYGON, PCI_DEVICE_ID_AMD_17H_DF_F3) },
 	{}
 };

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #71 lore raw

PATCH 71/225 media: rcar-vin: Select correct interrupt mode for V4L2_FIELD_ALTERNATE

From: Niklas Söderlund <[email protected]>

[ Upstream commit e10707d5865c90d3dfe4ef589ce02ff4287fef85 ]

When adding proper support for V4L2_FIELD_ALTERNATE it was missed that this field format should trigger an interrupt for each field, not just for the whole frame. Fix this by marking it as progressive in the capture setup, which will then select the correct interrupt mode.

Tested on both Gen2 and Gen3 with the result of a doubling of the frame rate for V4L2_FIELD_ALTERNATE. From a PAL video source the frame rate is now 50, which is expected for alternate field capture.

Signed-off-by Niklas Söderlund <[email protected]>

Signed-off-by Hans Verkuil <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/platform/renesas/rcar-vin/rcar-dma.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

drivers/media/platform/renesas/rcar-vin/rcar-dma.c +1 -3

index 3aea96d85165a..ef5adffae1972 100644
@@ -651,11 +651,9 @@ static int rvin_setup(struct rvin_dev *vin)
 	case V4L2_FIELD_SEQ_TB:
 	case V4L2_FIELD_SEQ_BT:
 	case V4L2_FIELD_NONE:
-		vnmc = VNMC_IM_ODD_EVEN;
-		progressive = true;
-		break;
 	case V4L2_FIELD_ALTERNATE:
 		vnmc = VNMC_IM_ODD_EVEN;
+		progressive = true;
 		break;
 	default:
 		vnmc = VNMC_IM_ODD;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #72 lore raw

PATCH 72/225 platform/x86: intel_scu_pcidrv: Add back PCI ID for Medfield

From: Julian Winkler <[email protected]>

[ Upstream commit 4a9b6850c794e4394cad99e2b863d75f5bc8e92f ]

This id was removed in commit b47018a778c1 ("platform/x86: intel_scu_ipc:
Remove Lincroft support"), saying it is only used on Moorestown, but apparently the same id is also used on Medfield.

Tested on the Medfield based Motorola RAZR i smartphone.

Signed-off-by Julian Winkler <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Reviewed-by Hans de Goede <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/platform/x86/intel_scu_pcidrv.c | 1 +
 1 file changed, 1 insertion(+)

drivers/platform/x86/intel_scu_pcidrv.c +1 -0

index 80abc708e4f2f..d904fad499aa5 100644
@@ -34,6 +34,7 @@ static int intel_scu_pci_probe(struct pci_dev *pdev,
 
 static const struct pci_device_id pci_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0x080e) },
+	{ PCI_VDEVICE(INTEL, 0x082a) },
 	{ PCI_VDEVICE(INTEL, 0x08ea) },
 	{ PCI_VDEVICE(INTEL, 0x0a94) },
 	{ PCI_VDEVICE(INTEL, 0x11a0) },

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #73 lore raw

PATCH 73/225 platform/mellanox: fix potential race in mlxbf-tmfifo driver

Link https://lore.kernel.org/r/b98c0ab61d644ba38fa9b3fd1607b138b0dd820b.1682518748.git.limings@nvidia.com open here

From: Liming Sun <[email protected]>

[ Upstream commit 3d43f9f639542fadfb28f40b509bf147a6624d48 ]

This commit adds memory barrier for the 'vq' update in function mlxbf_tmfifo_virtio_find_vqs() to avoid potential race due to out-of-order memory write. It also adds barrier for the 'is_ready' flag to make sure the initializations are visible before this flag is checked.

Signed-off-by Liming Sun <[email protected]>

Reviewed-by Vadim Pasternak <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/platform/mellanox/mlxbf-tmfifo.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

drivers/platform/mellanox/mlxbf-tmfifo.c +9 -2

index 1ae3c56b66b09..b2e19f30a928b 100644
@@ -765,7 +765,7 @@ static void mlxbf_tmfifo_rxtx(struct mlxbf_tmfifo_vring *vring, bool is_rx)
 	fifo = vring->fifo;
 
 	/* Return if vdev is not ready. */
-	if (!fifo->vdev[devid])
+	if (!fifo || !fifo->vdev[devid])
 		return;
 
 	/* Return if another vring is running. */

@@ -961,9 +961,13 @@ static int mlxbf_tmfifo_virtio_find_vqs(struct virtio_device *vdev,
 
 		vq->num_max = vring->num;
 
+		vq->priv = vring;
+
+		/* Make vq update visible before using it. */
+		virtio_mb(false);
+
 		vqs[i] = vq;
 		vring->vq = vq;
-		vq->priv = vring;
 	}
 
 	return 0;

@@ -1260,6 +1264,9 @@ static int mlxbf_tmfifo_probe(struct platform_device *pdev)
 
 	mod_timer(&fifo->timer, jiffies + MLXBF_TMFIFO_TIMER_INTERVAL);
 
+	/* Make all updates visible before setting the 'is_ready' flag. */
+	virtio_mb(false);
+
 	fifo->is_ready = true;
 	return 0;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #74 lore raw

PATCH 74/225 gfs2: Dont deref jdesc in evict

From: Bob Peterson <[email protected]>

[ Upstream commit 504a10d9e46bc37b23d0a1ae2f28973c8516e636 ]

On corrupt gfs2 file systems the evict code can try to reference the journal descriptor structure, jdesc, after it has been freed and set to NULL. The sequence of events is:

init_journal()
...
fail_jindex:
gfs2_jindex_free(sdp); <------frees journals, sets jdesc = NULL

      if (gfs2_holder_initialized(&ji_gh))
         gfs2_glock_dq_uninit(&ji_gh);
fail:
   iput(sdp->sd_jindex); <--references jdesc in evict_linked_inode
      evict()
         gfs2_evict_inode()
            evict_linked_inode()
               ret = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks);

<------references the now freed/zeroed sd_jdesc pointer.

The call to gfs2_trans_begin is done because the truncate_inode_pages call can cause gfs2 events that require a transaction, such as removing journaled data (jdata) blocks from the journal.

This patch fixes the problem by adding a check for sdp->sd_jdesc to function gfs2_evict_inode. In theory, this should only happen to corrupt gfs2 file systems, when gfs2 detects the problem, reports it, then tries to evict all the system inodes it has read in up to that point.

Reported-by Yang Lan <[email protected]>

Signed-off-by Bob Peterson <[email protected]>

Signed-off-by Andreas Gruenbacher <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/gfs2/super.c | 8 ++++++++
 1 file changed, 8 insertions(+)

fs/gfs2/super.c +8 -0

index 2015bd05cba10..9d27aa8bd2bc6 100644
@@ -1380,6 +1380,14 @@ static void gfs2_evict_inode(struct inode *inode)
 	if (inode->i_nlink || sb_rdonly(sb))
 		goto out;
 
+	/*
+	 * In case of an incomplete mount, gfs2_evict_inode() may be called for
+	 * system files without having an active journal to write to.  In that
+	 * case, skip the filesystem evict.
+	 */
+	if (!sdp->sd_jdesc)
+		goto out;
+
 	gfs2_holder_mark_uninitialized(&gh);
 	ret = evict_should_delete(inode, &gh);
 	if (ret == SHOULD_DEFER_EVICTION)

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #75 lore raw

PATCH 75/225 drm/amdgpu: set gfx9 onwards APU atomics support to be true

From: Yifan Zhang <[email protected]>

[ Upstream commit af7828fbceed4f9e503034111066a0adef3db383 ]

APUs w/ gfx9 onwards doesn't reply on PCIe atomics, rather it is internal path w/ native atomic support. Set have_atomics_support to true.

Signed-off-by Yifan Zhang <[email protected]>

Reviewed-by Lang Yu <[email protected]>

Acked-by Felix Kuehling <[email protected]>

Acked-by Alex Deucher <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 6 ++++++
 1 file changed, 6 insertions(+)

drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +6 -0

index 9556df0dfefad..ef0a94c70859b 100644
@@ -3734,6 +3734,12 @@ int amdgpu_device_init(struct amdgpu_device *adev,
 		adev->have_atomics_support = ((struct amd_sriov_msg_pf2vf_info *)
 			adev->virt.fw_reserve.p_pf2vf)->pcie_atomic_ops_support_flags ==
 			(PCI_EXP_DEVCAP2_ATOMIC_COMP32 | PCI_EXP_DEVCAP2_ATOMIC_COMP64);
+	/* APUs w/ gfx9 onwards doesn't reply on PCIe atomics, rather it is a
+	 * internal path natively support atomics, set have_atomics_support to true.
+	 */
+	else if ((adev->flags & AMD_IS_APU) &&
+		(adev->ip_versions[GC_HWIP][0] > IP_VERSION(9, 0, 0)))
+		adev->have_atomics_support = true;
 	else
 		adev->have_atomics_support =
 			!pci_enable_atomic_ops_to_root(adev->pdev,

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #76 lore raw

PATCH 76/225 fbdev: imsttfb: Fix use after free bug in imsttfb_probe

From: Zheng Wang <[email protected]>

[ Upstream commit c75f5a55061091030a13fef71b9995b89bc86213 ]

A use-after-free bug may occur if init_imstt invokes framebuffer_release and free the info ptr. The caller, imsttfb_probe didn't notice that and still keep the ptr as private data in pdev.

If we remove the driver which will call imsttfb_remove to make cleanup, UAF happens.

Fix it by return error code if bad case happens in init_imstt.

Signed-off-by Zheng Wang <[email protected]>

Signed-off-by Helge Deller <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/video/fbdev/imsttfb.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

drivers/video/fbdev/imsttfb.c +8 -7

index d7edb9c5d3a3f..e6adb2890ecfe 100644
@@ -1347,7 +1347,7 @@ static const struct fb_ops imsttfb_ops = {
 	.fb_ioctl 	= imsttfb_ioctl,
 };
 
-static void init_imstt(struct fb_info *info)
+static int init_imstt(struct fb_info *info)
 {
 	struct imstt_par *par = info->par;
 	__u32 i, tmp, *ip, *end;

@@ -1420,7 +1420,7 @@ static void init_imstt(struct fb_info *info)
 	    || !(compute_imstt_regvals(par, info->var.xres, info->var.yres))) {
 		printk("imsttfb: %ux%ux%u not supported\n", info->var.xres, info->var.yres, info->var.bits_per_pixel);
 		framebuffer_release(info);
-		return;
+		return -ENODEV;
 	}
 
 	sprintf(info->fix.id, "IMS TT (%s)", par->ramdac == IBM ? "IBM" : "TVP");

@@ -1456,12 +1456,13 @@ static void init_imstt(struct fb_info *info)
 
 	if (register_framebuffer(info) < 0) {
 		framebuffer_release(info);
-		return;
+		return -ENODEV;
 	}
 
 	tmp = (read_reg_le32(par->dc_regs, SSTATUS) & 0x0f00) >> 8;
 	fb_info(info, "%s frame buffer; %uMB vram; chip version %u\n",
 		info->fix.id, info->fix.smem_len >> 20, tmp);
+	return 0;
 }
 
 static int imsttfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)

@@ -1529,10 +1530,10 @@ static int imsttfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!par->cmap_regs)
 		goto error;
 	info->pseudo_palette = par->palette;
-	init_imstt(info);
-
-	pci_set_drvdata(pdev, info);
-	return 0;
+	ret = init_imstt(info);
+	if (!ret)
+		pci_set_drvdata(pdev, info);
+	return ret;
 
 error:
 	if (par->dc_regs)

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #77 lore raw

PATCH 77/225 fbdev: modedb: Add 1920x1080 at 60 Hz video mode

From: Helge Deller <[email protected]>

[ Upstream commit c8902258b2b8ecaa1b8d88c312853c5b14c2553d ]

Add typical resolution for Full-HD monitors.

Signed-off-by Helge Deller <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/video/fbdev/core/modedb.c | 5 +++++
 1 file changed, 5 insertions(+)

drivers/video/fbdev/core/modedb.c +5 -0

index 6473e0dfe1464..e78ec7f728463 100644
@@ -257,6 +257,11 @@ static const struct fb_videomode modedb[] = {
 	{ NULL, 72, 480, 300, 33386, 40, 24, 11, 19, 80, 3, 0,
 		FB_VMODE_DOUBLE },
 
+	/* 1920x1080 @ 60 Hz, 67.3 kHz hsync */
+	{ NULL, 60, 1920, 1080, 6734, 148, 88, 36, 4, 44, 5, 0,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		FB_VMODE_NONINTERLACED },
+
 	/* 1920x1200 @ 60 Hz, 74.5 Khz hsync */
 	{ NULL, 60, 1920, 1200, 5177, 128, 336, 1, 38, 208, 3,
 		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #78 lore raw

PATCH 78/225 fbdev: stifb: Fix info entry in sti_struct on error path

From: Helge Deller <[email protected]>

[ Upstream commit 0bdf1ad8d10bd4e50a8b1a2c53d15984165f7fea ]

Minor fix to reset the info field to NULL in case of error.

Signed-off-by Helge Deller <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/video/fbdev/stifb.c | 1 +
 1 file changed, 1 insertion(+)

drivers/video/fbdev/stifb.c +1 -0

index ef8a4c5fc6875..63f51783352dc 100644
@@ -1413,6 +1413,7 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref)
 	iounmap(info->screen_base);
 out_err0:
 	kfree(fb);
+	sti->info = NULL;
 	return -ENXIO;
 }

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #79 lore raw

PATCH 79/225 nbd: Fix debugfs_create_dir error checking

From: Ivan Orlov <[email protected]>

[ Upstream commit 4913cfcf014c95f0437db2df1734472fd3e15098 ]

The debugfs_create_dir function returns ERR_PTR in case of error, and the only correct way to check if an error occurred is 'IS_ERR' inline function. This patch will replace the null-comparison with IS_ERR.

Signed-off-by Ivan Orlov <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Jens Axboe <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/block/nbd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

drivers/block/nbd.c +2 -2

index 888a6abb50f53..7718c81e1dba8 100644
@@ -1665,7 +1665,7 @@ static int nbd_dev_dbg_init(struct nbd_device *nbd)
 		return -EIO;
 
 	dir = debugfs_create_dir(nbd_name(nbd), nbd_dbg_dir);
-	if (!dir) {
+	if (IS_ERR(dir)) {
 		dev_err(nbd_to_dev(nbd), "Failed to create debugfs dir for '%s'\n",
 			nbd_name(nbd));
 		return -EIO;

@@ -1691,7 +1691,7 @@ static int nbd_dbg_init(void)
 	struct dentry *dbg_dir;
 
 	dbg_dir = debugfs_create_dir("nbd", NULL);
-	if (!dbg_dir)
+	if (IS_ERR(dbg_dir))
 		return -EIO;
 
 	nbd_dbg_dir = dbg_dir;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #80 lore raw

PATCH 80/225 block/rnbd: replace REQ_OP_FLUSH with REQ_OP_WRITE

[1]. https://lore.kernel.org/all/[email protected]/

From: Guoqing Jiang <[email protected]>

[ Upstream commit 5e6e08087a4acb4ee3574cea32dbff0f63c7f608 ]

Since flush bios are implemented as writes with no data and the preflush flag per Christoph's comment [1].

And we need to change it in rnbd accordingly. Otherwise, I got splatting when create fs from rnbd client.

[  464.028545] ------------[ cut here ]------------
[  464.028553] WARNING: CPU: 0 PID: 65 at block/blk-core.c:751 submit_bio_noacct+0x32c/0x5d0
[ ... ]
[  464.028668] CPU: 0 PID: 65 Comm: kworker/0:1H Tainted: G           OE      6.4.0-rc1 #9
[  464.028671] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[  464.028673] Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
[  464.028717] RIP: 0010:submit_bio_noacct+0x32c/0x5d0
[  464.028720] Code: 03 0f 85 51 fe ff ff 48 8b 43 18 8b 88 04 03 00 00 85 c9 0f 85 3f fe ff ff e9 be fd ff ff 0f b6 d0 3c 0d 74 26 83 fa 01 74 21 <0f> 0b b8 0a 00 00 00 e9 56 fd ff ff 4c 89 e7 e8 70 a1 03 00 84 c0
[  464.028722] RSP: 0018:ffffaf3680b57c68 EFLAGS: 00010202
[  464.028724] RAX: 0000000000060802 RBX: ffffa09dcc18bf00 RCX: 0000000000000000
[  464.028726] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffffa09dde081d00
[  464.028727] RBP: ffffaf3680b57c98 R08: ffffa09dde081d00 R09: ffffa09e38327200
[  464.028729] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa09dde081d00
[  464.028730] R13: ffffa09dcb06e1e8 R14: 0000000000000000 R15: 0000000000200000
[  464.028733] FS:  0000000000000000(0000) GS:ffffa09e3bc00000(0000) knlGS:0000000000000000
[  464.028735] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  464.028736] CR2: 000055a4e8206c40 CR3: 0000000119f06000 CR4: 00000000003506f0
[  464.028738] Call Trace:
[  464.028740]  <TASK>
[  464.028746]  submit_bio+0x1b/0x80
[  464.028748]  rnbd_srv_rdma_ev+0x50d/0x10c0 [rnbd_server]
[  464.028754]  ? percpu_ref_get_many.constprop.0+0x55/0x140 [rtrs_server]
[  464.028760]  ? __this_cpu_preempt_check+0x13/0x20
[  464.028769]  process_io_req+0x1dc/0x450 [rtrs_server]
[  464.028775]  rtrs_srv_inv_rkey_done+0x67/0xb0 [rtrs_server]
[  464.028780]  __ib_process_cq+0xbc/0x1f0 [ib_core]
[  464.028793]  ib_cq_poll_work+0x2b/0xa0 [ib_core]
[  464.028804]  process_one_work+0x2a9/0x580

Signed-off-by Guoqing Jiang <[email protected]>

Reviewed-by Chaitanya Kulkarni <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Jens Axboe <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/block/rnbd/rnbd-proto.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/block/rnbd/rnbd-proto.h +1 -1

index ea7ac8bca63cf..da1d0542d7e2c 100644
@@ -241,7 +241,7 @@ static inline blk_opf_t rnbd_to_bio_flags(u32 rnbd_opf)
 		bio_opf = REQ_OP_WRITE;
 		break;
 	case RNBD_OP_FLUSH:
-		bio_opf = REQ_OP_FLUSH | REQ_PREFLUSH;
+		bio_opf = REQ_OP_WRITE | REQ_PREFLUSH;
 		break;
 	case RNBD_OP_DISCARD:
 		bio_opf = REQ_OP_DISCARD;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #81 lore raw

PATCH 81/225 nvme-pci: add NVME_QUIRK_BOGUS_NID for HS-SSD-FUTURE 2048G

Link https://bugzilla.kernel.org/show_bug.cgi?id=217384

From: Sagi Grimberg <[email protected]>

[ Upstream commit 1616d6c3717bae9041a4240d381ec56ccdaafedc ]

Add a quirk to fix HS-SSD-FUTURE 2048G SSD drives reporting duplicate nsids.

Reported-by Andrey God <[email protected]>

Signed-off-by Sagi Grimberg <[email protected]>

Signed-off-by Christoph Hellwig <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/nvme/host/pci.c | 2 ++
 1 file changed, 2 insertions(+)

drivers/nvme/host/pci.c +2 -0

index 581bf94416e6d..3347e86b3c55f 100644
@@ -3554,6 +3554,8 @@ static const struct pci_device_id nvme_id_table[] = {
 				NVME_QUIRK_IGNORE_DEV_SUBNQN, },
 	{ PCI_DEVICE(0x10ec, 0x5763), /* TEAMGROUP T-FORCE CARDEA ZERO Z330 SSD */
 		.driver_data = NVME_QUIRK_BOGUS_NID, },
+	{ PCI_DEVICE(0x1e4b, 0x1602), /* HS-SSD-FUTURE 2048G  */
+		.driver_data = NVME_QUIRK_BOGUS_NID, },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMAZON, 0x0061),
 		.driver_data = NVME_QUIRK_DMA_ADDRESS_BITS_48, },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMAZON, 0x0065),

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #82 lore raw

PATCH 82/225 nvme-pci: add quirk for missing secondary temperature thresholds

From: Hristo Venev <[email protected]>

[ Upstream commit bd375feeaf3408ed00e08c3bc918d6be15f691ad ]

On Kingston KC3000 and Kingston FURY Renegade (both have the same PCI IDs) accessing temp3_{min,max} fails with an invalid field error (note that there is no problem setting the thresholds for temp1).

This contradicts the NVM Express Base Specification 2.0b, page 292:

The over temperature threshold and under temperature threshold features shall be implemented for all implemented temperature sensors (i.e., all Temperature Sensor fields that report a non-zero value).

Define NVME_QUIRK_NO_SECONDARY_TEMP_THRESH that disables the thresholds for all but the composite temperature and set it for this device.

Signed-off-by Hristo Venev <[email protected]>

Reviewed-by Guenter Roeck <[email protected]>

Signed-off-by Christoph Hellwig <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/nvme/host/hwmon.c | 4 +++-
 drivers/nvme/host/nvme.h  | 5 +++++
 drivers/nvme/host/pci.c   | 2 ++
 3 files changed, 10 insertions(+), 1 deletion(-)

drivers/nvme/host/hwmon.c +3 -1

index 9e6e56c20ec99..316f3e4ca7cc6 100644
@@ -163,7 +163,9 @@ static umode_t nvme_hwmon_is_visible(const void *_data,
 	case hwmon_temp_max:
 	case hwmon_temp_min:
 		if ((!channel && data->ctrl->wctemp) ||
-		    (channel && data->log->temp_sensor[channel - 1])) {
+		    (channel && data->log->temp_sensor[channel - 1] &&
+		     !(data->ctrl->quirks &
+		       NVME_QUIRK_NO_SECONDARY_TEMP_THRESH))) {
 			if (data->ctrl->quirks &
 			    NVME_QUIRK_NO_TEMP_THRESH_CHANGE)
 				return 0444;

drivers/nvme/host/nvme.h +5 -0

index 01d90424af534..3f82de6060ef7 100644
@@ -149,6 +149,11 @@ enum nvme_quirks {
 	 * Reports garbage in the namespace identifiers (eui64, nguid, uuid).
 	 */
 	NVME_QUIRK_BOGUS_NID			= (1 << 18),
+
+	/*
+	 * No temperature thresholds for channels other than 0 (Composite).
+	 */
+	NVME_QUIRK_NO_SECONDARY_TEMP_THRESH	= (1 << 19),
 };
 
 /*

drivers/nvme/host/pci.c +2 -0

index 3347e86b3c55f..1ec0ca40604aa 100644
@@ -3515,6 +3515,8 @@ static const struct pci_device_id nvme_id_table[] = {
 		.driver_data = NVME_QUIRK_NO_DEEPEST_PS, },
 	{ PCI_DEVICE(0x2646, 0x2263),   /* KINGSTON A2000 NVMe SSD  */
 		.driver_data = NVME_QUIRK_NO_DEEPEST_PS, },
+	{ PCI_DEVICE(0x2646, 0x5013),   /* Kingston KC3000, Kingston FURY Renegade */
+		.driver_data = NVME_QUIRK_NO_SECONDARY_TEMP_THRESH, },
 	{ PCI_DEVICE(0x2646, 0x5018),   /* KINGSTON OM8SFP4xxxxP OS21012 NVMe SSD */
 		.driver_data = NVME_QUIRK_DISABLE_WRITE_ZEROES, },
 	{ PCI_DEVICE(0x2646, 0x5016),   /* KINGSTON OM3PGP4xxxxP OS21011 NVMe SSD */

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #83 lore raw

PATCH 83/225 ASoC: amd: yc: Add DMI entry to support System76 Pangolin 12

From: Jeremy Soller <[email protected]>

[ Upstream commit 7b9891ad25246b18b5ccc19518da7abc7763aa0a ]

Add pang12 quirk to enable the internal microphone.

Signed-off-by Jeremy Soller <[email protected]

Signed-off-by Tim Crawford <[email protected]

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Mark Brown <[email protected]

Signed-off-by Sasha Levin <[email protected]>

---
 sound/soc/amd/yc/acp6x-mach.c | 7 +++++++
 1 file changed, 7 insertions(+)

sound/soc/amd/yc/acp6x-mach.c +7 -0

index b9958e5553674..84b401b685f7f 100644
@@ -297,6 +297,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "8A22"),
 		}
 	},
+	{
+		.driver_data = &acp6x_card,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "System76"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "pang12"),
+		}
+	},
 	{}
 };

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:40 UTC #84 lore raw

PATCH 84/225 ASoC: dwc: limit the number of overrun messages

From: Maxim Kochetkov <[email protected]>

[ Upstream commit ab6ecfbf40fccf74b6ec2ba7ed6dd2fc024c3af2 ]

On slow CPU (FPGA/QEMU emulated) printing overrun messages from interrupt handler to uart console may leads to more overrun errors. So use dev_err_ratelimited to limit the number of error messages.

Signed-off-by Maxim Kochetkov <[email protected]

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Mark Brown <[email protected]

Signed-off-by Sasha Levin <[email protected]>

---
 sound/soc/dwc/dwc-i2s.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

sound/soc/dwc/dwc-i2s.c +2 -2

index 7f7dd07c63b2f..3496301582b22 100644
@@ -132,13 +132,13 @@ static irqreturn_t i2s_irq_handler(int irq, void *dev_id)
 
 		/* Error Handling: TX */
 		if (isr[i] & ISR_TXFO) {
-			dev_err(dev->dev, "TX overrun (ch_id=%d)\n", i);
+			dev_err_ratelimited(dev->dev, "TX overrun (ch_id=%d)\n", i);
 			irq_valid = true;
 		}
 
 		/* Error Handling: TX */
 		if (isr[i] & ISR_RXFO) {
-			dev_err(dev->dev, "RX overrun (ch_id=%d)\n", i);
+			dev_err_ratelimited(dev->dev, "RX overrun (ch_id=%d)\n", i);
 			irq_valid = true;
 		}
 	}

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #85 lore raw

PATCH 85/225 um: harddog: fix modular build

From: Johannes Berg <[email protected]>

[ Upstream commit 73a23d7710331a530e972903318528b75e5a5f58 ]

Since we no longer (want to) export any libc symbols the _user portions of any drivers need to be built into image rather than the module. I missed this for the watchdog. Fix the watchdog accordingly.

Signed-off-by Richard Weinberger <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 arch/um/drivers/Makefile           | 4 +++-
 arch/um/drivers/harddog.h          | 9 +++++++++
 arch/um/drivers/harddog_kern.c     | 7 +------
 arch/um/drivers/harddog_user.c     | 1 +
 arch/um/drivers/harddog_user_exp.c | 9 +++++++++
 5 files changed, 23 insertions(+), 7 deletions(-)
 create mode 100644 arch/um/drivers/harddog.h
 create mode 100644 arch/um/drivers/harddog_user_exp.c

arch/um/drivers/Makefile +3 -1

index e1dc4292bd22e..65b449c992d2c 100644
@@ -16,7 +16,8 @@ mconsole-objs := mconsole_kern.o mconsole_user.o
 hostaudio-objs := hostaudio_kern.o
 ubd-objs := ubd_kern.o ubd_user.o
 port-objs := port_kern.o port_user.o
-harddog-objs := harddog_kern.o harddog_user.o
+harddog-objs := harddog_kern.o
+harddog-builtin-$(CONFIG_UML_WATCHDOG) := harddog_user.o harddog_user_exp.o
 rtc-objs := rtc_kern.o rtc_user.o
 
 LDFLAGS_pcap.o = $(shell $(CC) $(KBUILD_CFLAGS) -print-file-name=libpcap.a)

@@ -60,6 +61,7 @@ obj-$(CONFIG_PTY_CHAN) += pty.o
 obj-$(CONFIG_TTY_CHAN) += tty.o 
 obj-$(CONFIG_XTERM_CHAN) += xterm.o xterm_kern.o
 obj-$(CONFIG_UML_WATCHDOG) += harddog.o
+obj-y += $(harddog-builtin-y) $(harddog-builtin-m)
 obj-$(CONFIG_BLK_DEV_COW_COMMON) += cow_user.o
 obj-$(CONFIG_UML_RANDOM) += random.o
 obj-$(CONFIG_VIRTIO_UML) += virtio_uml.o

arch/um/drivers/harddog.h new file +9 -0

new file mode 100644
index 0000000000000..6d9ea60e7133e
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef UM_WATCHDOG_H
+#define UM_WATCHDOG_H
+
+int start_watchdog(int *in_fd_ret, int *out_fd_ret, char *sock);
+void stop_watchdog(int in_fd, int out_fd);
+int ping_watchdog(int fd);
+
+#endif /* UM_WATCHDOG_H */

arch/um/drivers/harddog_kern.c +1 -6

index e6d4f43deba82..60d1c6cab8a95 100644
@@ -47,6 +47,7 @@
 #include <linux/spinlock.h>
 #include <linux/uaccess.h>
 #include "mconsole.h"
+#include "harddog.h"
 
 MODULE_LICENSE("GPL");

@@ -60,8 +61,6 @@ static int harddog_out_fd = -1;
  *	Allow only one person to hold it open
  */
 
-extern int start_watchdog(int *in_fd_ret, int *out_fd_ret, char *sock);
-
 static int harddog_open(struct inode *inode, struct file *file)
 {
 	int err = -EBUSY;

@@ -92,8 +91,6 @@ static int harddog_open(struct inode *inode, struct file *file)
 	return err;
 }
 
-extern void stop_watchdog(int in_fd, int out_fd);
-
 static int harddog_release(struct inode *inode, struct file *file)
 {
 	/*

@@ -112,8 +109,6 @@ static int harddog_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-extern int ping_watchdog(int fd);
-
 static ssize_t harddog_write(struct file *file, const char __user *data, size_t len,
 			     loff_t *ppos)
 {

arch/um/drivers/harddog_user.c +1 -0

index 070468d22e394..9ed89304975ed 100644
@@ -7,6 +7,7 @@
 #include <unistd.h>
 #include <errno.h>
 #include <os.h>
+#include "harddog.h"
 
 struct dog_data {
 	int stdin_fd;

arch/um/drivers/harddog_user_exp.c new file +9 -0

new file mode 100644
index 0000000000000..c74d4b815d143
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/export.h>
+#include "harddog.h"
+
+#if IS_MODULE(CONFIG_UML_WATCHDOG)
+EXPORT_SYMBOL(start_watchdog);
+EXPORT_SYMBOL(stop_watchdog);
+EXPORT_SYMBOL(ping_watchdog);
+#endif

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #86 lore raw

PATCH 86/225 xfrm: Check if_id in inbound policy/secpath match

From: Benedict Wong <[email protected]>

[ Upstream commit 8680407b6f8f5fba59e8f1d63c869abc280f04df ]

This change ensures that if configured in the policy, the if_id set in the policy and secpath states match during the inbound policy check. Without this, there is potential for ambiguity where entries in the secpath differing by only the if_id could be mismatched.

Notably, this is checked in the outbound direction when resolving templates to SAs, but not on the inbound path when matching SAs and policies.

Test: Tested against Android kernel unit tests & CTS

Signed-off-by Benedict Wong <[email protected]>

Signed-off-by Steffen Klassert <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/xfrm/xfrm_policy.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

net/xfrm/xfrm_policy.c +6 -5

index bc04cb83215f9..e894c269affb1 100644
@@ -3237,7 +3237,7 @@ xfrm_secpath_reject(int idx, struct sk_buff *skb, const struct flowi *fl)
 
 static inline int
 xfrm_state_ok(const struct xfrm_tmpl *tmpl, const struct xfrm_state *x,
-	      unsigned short family)
+	      unsigned short family, u32 if_id)
 {
 	if (xfrm_state_kern(x))
 		return tmpl->optional && !xfrm_state_addr_cmp(tmpl, x, tmpl->encap_family);

@@ -3248,7 +3248,8 @@ xfrm_state_ok(const struct xfrm_tmpl *tmpl, const struct xfrm_state *x,
 		(tmpl->allalgs || (tmpl->aalgos & (1<<x->props.aalgo)) ||
 		 !(xfrm_id_proto_match(tmpl->id.proto, IPSEC_PROTO_ANY))) &&
 		!(x->props.mode != XFRM_MODE_TRANSPORT &&
-		  xfrm_state_addr_cmp(tmpl, x, family));
+		  xfrm_state_addr_cmp(tmpl, x, family)) &&
+		(if_id == 0 || if_id == x->if_id);
 }
 
 /*

@@ -3260,7 +3261,7 @@ xfrm_state_ok(const struct xfrm_tmpl *tmpl, const struct xfrm_state *x,
  */
 static inline int
 xfrm_policy_ok(const struct xfrm_tmpl *tmpl, const struct sec_path *sp, int start,
-	       unsigned short family)
+	       unsigned short family, u32 if_id)
 {
 	int idx = start;

@@ -3270,7 +3271,7 @@ xfrm_policy_ok(const struct xfrm_tmpl *tmpl, const struct sec_path *sp, int star
 	} else
 		start = -1;
 	for (; idx < sp->len; idx++) {
-		if (xfrm_state_ok(tmpl, sp->xvec[idx], family))
+		if (xfrm_state_ok(tmpl, sp->xvec[idx], family, if_id))
 			return ++idx;
 		if (sp->xvec[idx]->props.mode != XFRM_MODE_TRANSPORT) {
 			if (start == -1)

@@ -3649,7 +3650,7 @@ int __xfrm_policy_check(struct sock *sk, int dir, struct sk_buff *skb,
 		 * are implied between each two transformations.
 		 */
 		for (i = xfrm_nr-1, k = 0; i >= 0; i--) {
-			k = xfrm_policy_ok(tpp[i], sp, k, family);
+			k = xfrm_policy_ok(tpp[i], sp, k, family, if_id);
 			if (k < 0) {
 				if (k < -1)
 					/* "-2 - errored_index" returned */

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #87 lore raw

PATCH 87/225 ASoC: dt-bindings: Adjust #sound-dai-cells on TIs single-DAI codecs

From: Martin Povišer <[email protected]>

[ Upstream commit efb2bfd7b3d210c479b9361c176d7426e5eb8663 ]

A bunch of TI's codecs have binding schemas which force #sound-dai-cells to one despite those codecs only having a single DAI. Allow for bindings with zero DAI cells and deprecate the former non-zero value.

Signed-off-by Martin Povišer <[email protected]

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Mark Brown <[email protected]

Signed-off-by Sasha Levin <[email protected]>

---
 Documentation/devicetree/bindings/sound/tas2562.yaml | 6 ++++--
 Documentation/devicetree/bindings/sound/tas2770.yaml | 6 ++++--
 Documentation/devicetree/bindings/sound/tas27xx.yaml | 6 ++++--
 3 files changed, 12 insertions(+), 6 deletions(-)

Documentation/devicetree/bindings/sound/tas2562.yaml +4 -2

index 30f6b029ac085..cb519a4b6e710 100644
@@ -52,7 +52,9 @@ properties:
     description: TDM TX current sense time slot.
 
   '#sound-dai-cells':
-    const: 1
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
 
 required:
   - compatible

@@ -69,7 +71,7 @@ examples:
      codec: codec@4c {
        compatible = "ti,tas2562";
        reg = <0x4c>;
-       #sound-dai-cells = <1>;
+       #sound-dai-cells = <0>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        shutdown-gpios = <&gpio1 15 0>;

Documentation/devicetree/bindings/sound/tas2770.yaml +4 -2

index bc90e72bf7cf9..1859fbe1cdf17 100644
@@ -54,7 +54,9 @@ properties:
       - 1 # Falling edge
 
   '#sound-dai-cells':
-    const: 1
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
 
 required:
   - compatible

@@ -71,7 +73,7 @@ examples:
      codec: codec@41 {
        compatible = "ti,tas2770";
        reg = <0x41>;
-       #sound-dai-cells = <1>;
+       #sound-dai-cells = <0>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        reset-gpio = <&gpio1 15 0>;

Documentation/devicetree/bindings/sound/tas27xx.yaml +4 -2

index 66a0df8850ea6..079cb6f8d4474 100644
@@ -47,7 +47,9 @@ properties:
     description: TDM TX voltage sense time slot.
 
   '#sound-dai-cells':
-    const: 1
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
 
 required:
   - compatible

@@ -64,7 +66,7 @@ examples:
      codec: codec@38 {
        compatible = "ti,tas2764";
        reg = <0x38>;
-       #sound-dai-cells = <1>;
+       #sound-dai-cells = <0>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        reset-gpios = <&gpio1 15 0>;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #88 lore raw

PATCH 88/225 ALSA: hda/realtek: Add quirks for ASUS GU604V and GU603V

From: Alexandru Sorodoc <[email protected]>

[ Upstream commit 4b963ae1df6426f0e51de64133d379d9bde50c48 ]

These models use 2 CS35L41 amplifiers using SPI for down-facing speakers.

alc285_fixup_speaker2_to_dac1 is needed to fix volume control of the down-facing speakers.

Pin configs are needed to enable headset mic detection.

Note that these models lack the ACPI _DSD properties needed to initialize the amplifiers. They can be added during boot to get working sound out of the speakers:
https://gist.github.com/lamperez/862763881c0e1c812392b5574727f6ff

Signed-off-by Alexandru Sorodoc <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 sound/pci/hda/patch_realtek.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

sound/pci/hda/patch_realtek.c +20 -0

index 379f216158ab4..7b5f194513c7b 100644
@@ -7063,6 +7063,8 @@ enum {
 	ALC225_FIXUP_DELL1_MIC_NO_PRESENCE,
 	ALC295_FIXUP_DISABLE_DAC3,
 	ALC285_FIXUP_SPEAKER2_TO_DAC1,
+	ALC285_FIXUP_ASUS_SPEAKER2_TO_DAC1,
+	ALC285_FIXUP_ASUS_HEADSET_MIC,
 	ALC280_FIXUP_HP_HEADSET_MIC,
 	ALC221_FIXUP_HP_FRONT_MIC,
 	ALC292_FIXUP_TPT460,

@@ -8033,6 +8035,22 @@ static const struct hda_fixup alc269_fixups[] = {
 		.chained = true,
 		.chain_id = ALC269_FIXUP_THINKPAD_ACPI
 	},
+	[ALC285_FIXUP_ASUS_SPEAKER2_TO_DAC1] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc285_fixup_speaker2_to_dac1,
+		.chained = true,
+		.chain_id = ALC245_FIXUP_CS35L41_SPI_2
+	},
+	[ALC285_FIXUP_ASUS_HEADSET_MIC] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x19, 0x03a11050 },
+			{ 0x1b, 0x03a11c30 },
+			{ }
+		},
+		.chained = true,
+		.chain_id = ALC285_FIXUP_ASUS_SPEAKER2_TO_DAC1
+	},
 	[ALC256_FIXUP_DELL_INSPIRON_7559_SUBWOOFER] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = (const struct hda_pintbl[]) {

@@ -9507,6 +9525,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1043, 0x1313, "Asus K42JZ", ALC269VB_FIXUP_ASUS_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1043, 0x13b0, "ASUS Z550SA", ALC256_FIXUP_ASUS_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_ASUS_ZENBOOK),
+	SND_PCI_QUIRK(0x1043, 0x1473, "ASUS GU604V", ALC285_FIXUP_ASUS_HEADSET_MIC),
+	SND_PCI_QUIRK(0x1043, 0x1483, "ASUS GU603V", ALC285_FIXUP_ASUS_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1517, "Asus Zenbook UX31A", ALC269VB_FIXUP_ASUS_ZENBOOK_UX31A),
 	SND_PCI_QUIRK(0x1043, 0x1662, "ASUS GV301QH", ALC294_FIXUP_ASUS_DUAL_SPK),
 	SND_PCI_QUIRK(0x1043, 0x1683, "ASUS UM3402YAR", ALC287_FIXUP_CS35L41_I2C_2),

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #89 lore raw

PATCH 89/225 ASoC: ssm2602: Add workaround for playback distortions

From: Paweł Anikiel <[email protected]>

[ Upstream commit f63550e2b165208a2f382afcaf5551df9569e1d4 ]

Apply a workaround for what appears to be a hardware quirk.

The problem seems to happen when enabling "whole chip power" (bit D7 register R6) for the very first time after the chip receives power. If either "output" (D4) or "DAC" (D3) aren't powered on at that time, playback becomes very distorted later on.

This happens on the Google Chameleon v3, as well as on a ZYBO Z7-10:
https://ez.analog.com/audio/f/q-a/543726/solved-ssm2603-right-output-offset-issue/480229
I suspect this happens only when using an external MCLK signal (which is the case for both of these boards).

Here are some experiments run on a Google Chameleon v3. These were run in userspace using a wrapper around the i2cset utility:

ssmset() {
        i2cset -y 0 0x1a $(($1*2)) $2
}

For each of the following sequences, we apply power to the ssm2603 chip, set the configuration registers R0-R5 and R7-R8, run the selected sequence, and check for distortions on playback.

ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # chip, out, dac
OK

ssmset 0x09 0x01 # core
ssmset 0x06 0x87 # out, dac
ssmset 0x06 0x07 # chip
OK

(disable MCLK)
ssmset 0x09 0x01 # core
ssmset 0x06 0x1f # chip
ssmset 0x06 0x07 # out, dac
(enable MCLK)
OK

ssmset 0x09 0x01 # core
ssmset 0x06 0x1f # chip
ssmset 0x06 0x07 # out, dac
NOT OK

ssmset 0x06 0x1f # chip
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # out, dac
NOT OK

ssmset 0x09 0x01 # core
ssmset 0x06 0x0f # chip, out
ssmset 0x06 0x07 # dac
NOT OK

ssmset 0x09 0x01 # core
ssmset 0x06 0x17 # chip, dac
ssmset 0x06 0x07 # out
NOT OK

For each of the following sequences, we apply power to the ssm2603 chip, run the selected sequence, issue a reset with R15, configure R0-R5 and R7-R8, run one of the NOT OK sequences from above, and check for distortions.

ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # chip, out, dac
OK

(disable MCLK)
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # chip, out, dac
(enable MCLK after reset)
NOT OK

ssmset 0x09 0x01 # core
ssmset 0x06 0x17 # chip, dac
NOT OK

ssmset 0x09 0x01 # core
ssmset 0x06 0x0f # chip, out
NOT OK

ssmset 0x06 0x07 # chip, out, dac
NOT OK

Signed-off-by Paweł Anikiel <[email protected]

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Mark Brown <[email protected]

Signed-off-by Sasha Levin <[email protected]>

---
 sound/soc/codecs/ssm2602.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

sound/soc/codecs/ssm2602.c +15 -0

index cbbe83b85adaf..cf7927222be15 100644
@@ -53,6 +53,18 @@ static const struct reg_default ssm2602_reg[SSM2602_CACHEREGNUM] = {
 	{ .reg = 0x09, .def = 0x0000 }
 };
 
+/*
+ * ssm2602 register patch
+ * Workaround for playback distortions after power up: activates digital
+ * core, and then powers on output, DAC, and whole chip at the same time
+ */
+
+static const struct reg_sequence ssm2602_patch[] = {
+	{ SSM2602_ACTIVE, 0x01 },
+	{ SSM2602_PWR,    0x07 },
+	{ SSM2602_RESET,  0x00 },
+};
+
 
 /*Appending several "None"s just for OSS mixer use*/
 static const char *ssm2602_input_select[] = {

@@ -589,6 +601,9 @@ static int ssm260x_component_probe(struct snd_soc_component *component)
 		return ret;
 	}
 
+	regmap_register_patch(ssm2602->regmap, ssm2602_patch,
+			      ARRAY_SIZE(ssm2602_patch));
+
 	/* set the update bits */
 	regmap_update_bits(ssm2602->regmap, SSM2602_LINVOL,
 			    LINVOL_LRIN_BOTH, LINVOL_LRIN_BOTH);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #90 lore raw

PATCH 90/225 media: dvb_demux: fix a bug for the continuity counter

Link https://lore.kernel.org/linux-media/[email protected] open here

From: YongSu Yoo <[email protected]>

[ Upstream commit 7efb10d8dc70ea3000cc70dca53407c52488acd1 ]

In dvb_demux.c, some logics exist which compare the expected continuity counter and the real continuity counter. If they are not matched each other, both of the expected continuity counter and the real continuity counter should be printed. But there exists a bug that the expected continuity counter is not correctly printed. The expected continuity counter is replaced with the real countinuity counter + 1 so that the epected continuity counter is not correclty printed. This is wrong. This bug is fixed.

Signed-off-by YongSu Yoo <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/dvb-core/dvb_demux.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

drivers/media/dvb-core/dvb_demux.c +2 -2

index 83cc32ad7e122..eadd579bb4fad 100644
@@ -115,12 +115,12 @@ static inline int dvb_dmx_swfilter_payload(struct dvb_demux_feed *feed,
 
 	cc = buf[3] & 0x0f;
 	ccok = ((feed->cc + 1) & 0x0f) == cc;
-	feed->cc = cc;
 	if (!ccok) {
 		set_buf_flags(feed, DMX_BUFFER_FLAG_DISCONTINUITY_DETECTED);
 		dprintk_sect_loss("missed packet: %d instead of %d!\n",
 				  cc, (feed->cc + 1) & 0x0f);
 	}
+	feed->cc = cc;
 
 	if (buf[1] & 0x40)	// PUSI ?
 		feed->peslen = 0xfffa;

@@ -300,7 +300,6 @@ static int dvb_dmx_swfilter_section_packet(struct dvb_demux_feed *feed,
 
 	cc = buf[3] & 0x0f;
 	ccok = ((feed->cc + 1) & 0x0f) == cc;
-	feed->cc = cc;
 
 	if (buf[3] & 0x20) {
 		/* adaption field present, check for discontinuity_indicator */

@@ -336,6 +335,7 @@ static int dvb_dmx_swfilter_section_packet(struct dvb_demux_feed *feed,
 		feed->pusi_seen = false;
 		dvb_dmx_swfilter_section_new(feed);
 	}
+	feed->cc = cc;
 
 	if (buf[1] & 0x40) {
 		/* PUSI=1 (is set), section boundary is here */

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #91 lore raw

PATCH 91/225 media: dvb-usb: az6027: fix three null-ptr-deref in az6027_i2c_xfer()

Link https://lore.kernel.org/linux-media/[email protected] open here

From: Wei Chen <[email protected]>

[ Upstream commit 858e97d7956d17a2cb56a9413468704a4d5abfe1 ]

In az6027_i2c_xfer, msg is controlled by user. When msg[i].buf is null, commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") fix the null-ptr-deref bug when msg[i].addr is 0x99. However, null-ptr-deref also happens when msg[i].addr is 0xd0 and 0xc0. We add check on msg[i].len to prevent null-ptr-deref.

Signed-off-by Wei Chen <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/usb/dvb-usb/az6027.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

drivers/media/usb/dvb-usb/az6027.c +12 -0

index 7d78ee09be5e1..a31c6f82f4e90 100644
@@ -988,6 +988,10 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n
 			/* write/read request */
 			if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) {
 				req = 0xB9;
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff));
 				value = msg[i].addr + (msg[i].len << 8);
 				length = msg[i + 1].len + 6;

@@ -1001,6 +1005,10 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n
 
 				/* demod 16bit addr */
 				req = 0xBD;
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff));
 				value = msg[i].addr + (2 << 8);
 				length = msg[i].len - 2;

@@ -1026,6 +1034,10 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n
 			} else {
 
 				req = 0xBD;
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				index = msg[i].buf[0] & 0x00FF;
 				value = msg[i].addr + (1 << 8);
 				length = msg[i].len - 1;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #92 lore raw

PATCH 92/225 media: dvb-usb-v2: ec168: fix null-ptr-deref in ec168_i2c_xfer()

Link https://lore.kernel.org/linux-media/[email protected] open here

From: Wei Chen <[email protected]>

[ Upstream commit a6dcefcc08eca1bf4e3d213c97c3cfb75f377935 ]

In ec168_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. If accessing msg[i].buf[0] without sanity check, null pointer deref would happen. We add check on msg[i].len to prevent crash.

Similar commit:
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

Signed-off-by Wei Chen <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/usb/dvb-usb-v2/ec168.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

drivers/media/usb/dvb-usb-v2/ec168.c +12 -0

index 7ed0ab9e429b1..0e4773fc025c9 100644
@@ -115,6 +115,10 @@ static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 	while (i < num) {
 		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
 			if (msg[i].addr == ec168_ec100_config.demod_address) {
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				req.cmd = READ_DEMOD;
 				req.value = 0;
 				req.index = 0xff00 + msg[i].buf[0]; /* reg */

@@ -131,6 +135,10 @@ static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 			}
 		} else {
 			if (msg[i].addr == ec168_ec100_config.demod_address) {
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				req.cmd = WRITE_DEMOD;
 				req.value = msg[i].buf[1]; /* val */
 				req.index = 0xff00 + msg[i].buf[0]; /* reg */

@@ -139,6 +147,10 @@ static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 				ret = ec168_ctrl_msg(d, &req);
 				i += 1;
 			} else {
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				req.cmd = WRITE_I2C;
 				req.value = msg[i].buf[0]; /* val */
 				req.index = 0x0100 + msg[i].addr; /* I2C addr */

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #93 lore raw

PATCH 93/225 media: dvb-usb-v2: ce6230: fix null-ptr-deref in ce6230_i2c_master_xfer()

Link https://lore.kernel.org/linux-media/[email protected] open here

From: Wei Chen <[email protected]>

[ Upstream commit dff919090155fb22679869e8469168f270dcd97f ]

In ce6230_i2c_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach ce6230_i2c_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash.

Similar commit:
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

Signed-off-by Wei Chen <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/usb/dvb-usb-v2/ce6230.c | 8 ++++++++
 1 file changed, 8 insertions(+)

drivers/media/usb/dvb-usb-v2/ce6230.c +8 -0

index 44540de1a2066..d3b5cb4a24daf 100644
@@ -101,6 +101,10 @@ static int ce6230_i2c_master_xfer(struct i2c_adapter *adap,
 		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
 			if (msg[i].addr ==
 				ce6230_zl10353_config.demod_address) {
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				req.cmd = DEMOD_READ;
 				req.value = msg[i].addr >> 1;
 				req.index = msg[i].buf[0];

@@ -117,6 +121,10 @@ static int ce6230_i2c_master_xfer(struct i2c_adapter *adap,
 		} else {
 			if (msg[i].addr ==
 				ce6230_zl10353_config.demod_address) {
+				if (msg[i].len < 1) {
+					i = -EOPNOTSUPP;
+					break;
+				}
 				req.cmd = DEMOD_WRITE;
 				req.value = msg[i].addr >> 1;
 				req.index = msg[i].buf[0];

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #94 lore raw

PATCH 94/225 media: dvb-usb-v2: rtl28xxu: fix null-ptr-deref in rtl28xxu_i2c_xfer

Link https://lore.kernel.org/linux-media/[email protected] open here

From: Zhang Shurong <[email protected]>

[ Upstream commit aa4a447b81b84f69c1a89ad899df157f386d7636 ]

In rtl28xxu_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach rtl28xxu_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash.

Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

Signed-off-by Zhang Shurong <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

drivers/media/usb/dvb-usb-v2/rtl28xxu.c +20 -0

index 795a012d40200..f7884bb56fccf 100644
@@ -176,6 +176,10 @@ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 			ret = -EOPNOTSUPP;
 			goto err_mutex_unlock;
 		} else if (msg[0].addr == 0x10) {
+			if (msg[0].len < 1 || msg[1].len < 1) {
+				ret = -EOPNOTSUPP;
+				goto err_mutex_unlock;
+			}
 			/* method 1 - integrated demod */
 			if (msg[0].buf[0] == 0x00) {
 				/* return demod page from driver cache */

@@ -189,6 +193,10 @@ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 				ret = rtl28xxu_ctrl_msg(d, &req);
 			}
 		} else if (msg[0].len < 2) {
+			if (msg[0].len < 1) {
+				ret = -EOPNOTSUPP;
+				goto err_mutex_unlock;
+			}
 			/* method 2 - old I2C */
 			req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1);
 			req.index = CMD_I2C_RD;

@@ -217,8 +225,16 @@ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 			ret = -EOPNOTSUPP;
 			goto err_mutex_unlock;
 		} else if (msg[0].addr == 0x10) {
+			if (msg[0].len < 1) {
+				ret = -EOPNOTSUPP;
+				goto err_mutex_unlock;
+			}
 			/* method 1 - integrated demod */
 			if (msg[0].buf[0] == 0x00) {
+				if (msg[0].len < 2) {
+					ret = -EOPNOTSUPP;
+					goto err_mutex_unlock;
+				}
 				/* save demod page for later demod access */
 				dev->page = msg[0].buf[1];
 				ret = 0;

@@ -231,6 +247,10 @@ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 				ret = rtl28xxu_ctrl_msg(d, &req);
 			}
 		} else if ((msg[0].len < 23) && (!dev->new_i2c_write)) {
+			if (msg[0].len < 1) {
+				ret = -EOPNOTSUPP;
+				goto err_mutex_unlock;
+			}
 			/* method 2 - old I2C */
 			req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1);
 			req.index = CMD_I2C_WR;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #95 lore raw

PATCH 95/225 media: dvb-usb: digitv: fix null-ptr-deref in digitv_i2c_xfer()

Link https://lore.kernel.org/linux-media/[email protected] open here

From: Wei Chen <[email protected]>

[ Upstream commit 9ded5bd2a49ce3015b7c936743eec0a0e6e11f0c ]

In digitv_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach digitv_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash.

Similar commit:
commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

Signed-off-by Wei Chen <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/usb/dvb-usb/digitv.c | 4 ++++
 1 file changed, 4 insertions(+)

drivers/media/usb/dvb-usb/digitv.c +4 -0

index 2756815a780bc..32134be169148 100644
@@ -63,6 +63,10 @@ static int digitv_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num
 		warn("more than 2 i2c messages at a time is not handled yet. TODO.");
 
 	for (i = 0; i < num; i++) {
+		if (msg[i].len < 1) {
+			i = -EOPNOTSUPP;
+			break;
+		}
 		/* write/read request */
 		if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
 			if (digitv_ctrl_msg(d, USB_READ_COFDM, msg[i].buf[0], NULL, 0,

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #96 lore raw

PATCH 96/225 media: dvb-usb: dw2102: fix uninit-value in su3000_read_mac_address

Link https://lore.kernel.org/linux-media/[email protected] open here

From: Wei Chen <[email protected]>

[ Upstream commit a3fd1ef27aa686d871cefe207bd6168c4b0cd29e ]

In su3000_read_mac_address, if i2c_transfer fails to execute two messages, array mac address will not be initialized. Without handling such error, later in function dvb_usb_adapter_dvb_init, proposed_mac is accessed before initialization.

Fix this error by returning a negative value if message execution fails.

Signed-off-by Wei Chen <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/usb/dvb-usb/dw2102.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/media/usb/dvb-usb/dw2102.c +1 -1

index 0ca764282c767..8747960e61461 100644
@@ -946,7 +946,7 @@ static int su3000_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
 	for (i = 0; i < 6; i++) {
 		obuf[1] = 0xf0 + i;
 		if (i2c_transfer(&d->i2c_adap, msg, 2) != 2)
-			break;
+			return -1;
 		else
 			mac[i] = ibuf[0];
 	}

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #97 lore raw

PATCH 97/225 media: netup_unidvb: fix irq init by register it at the end of probe

Link https://lore.kernel.org/linux-media/[email protected] open here

From: Wei Chen <[email protected]>

[ Upstream commit e6ad6233592593079db5c8fa592c298e51bc1356 ]

IRQ handler netup_spi_interrupt() takes spinlock spi->lock. The lock is initialized in netup_spi_init(). However, irq handler is registered before initializing the lock.

Spinlock dma->lock and i2c->lock suffer from the same problem.

Fix this by registering the irq at the end of probe.

Signed-off-by Wei Chen <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 .../media/pci/netup_unidvb/netup_unidvb_core.c  | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

drivers/media/pci/netup_unidvb/netup_unidvb_core.c +9 -8

index aaa1d2dedebdd..d85bfbb77a250 100644
@@ -887,12 +887,7 @@ static int netup_unidvb_initdev(struct pci_dev *pci_dev,
 		ndev->lmmio0, (u32)pci_resource_len(pci_dev, 0),
 		ndev->lmmio1, (u32)pci_resource_len(pci_dev, 1),
 		pci_dev->irq);
-	if (request_irq(pci_dev->irq, netup_unidvb_isr, IRQF_SHARED,
-			"netup_unidvb", pci_dev) < 0) {
-		dev_err(&pci_dev->dev,
-			"%s(): can't get IRQ %d\n", __func__, pci_dev->irq);
-		goto irq_request_err;
-	}
+
 	ndev->dma_size = 2 * 188 *
 		NETUP_DMA_BLOCKS_COUNT * NETUP_DMA_PACKETS_COUNT;
 	ndev->dma_virt = dma_alloc_coherent(&pci_dev->dev,

@@ -933,6 +928,14 @@ static int netup_unidvb_initdev(struct pci_dev *pci_dev,
 		dev_err(&pci_dev->dev, "netup_unidvb: DMA setup failed\n");
 		goto dma_setup_err;
 	}
+
+	if (request_irq(pci_dev->irq, netup_unidvb_isr, IRQF_SHARED,
+			"netup_unidvb", pci_dev) < 0) {
+		dev_err(&pci_dev->dev,
+			"%s(): can't get IRQ %d\n", __func__, pci_dev->irq);
+		goto dma_setup_err;
+	}
+
 	dev_info(&pci_dev->dev,
 		"netup_unidvb: device has been initialized\n");
 	return 0;

@@ -951,8 +954,6 @@ static int netup_unidvb_initdev(struct pci_dev *pci_dev,
 	dma_free_coherent(&pci_dev->dev, ndev->dma_size,
 			ndev->dma_virt, ndev->dma_phys);
 dma_alloc_err:
-	free_irq(pci_dev->irq, pci_dev);
-irq_request_err:
 	iounmap(ndev->lmmio1);
 pci_bar1_error:
 	iounmap(ndev->lmmio0);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #98 lore raw

PATCH 98/225 media: dvb_ca_en50221: fix a size write bug

Link https://lore.kernel.org/linux-media/[email protected] open here

From: YongSu Yoo <[email protected]>

[ Upstream commit a4315e5be7020aac9b24a8151caf4bb85224cd0e ]

The function of "dvb_ca_en50221_write_data" at source/drivers/media /dvb-core/dvb_ca_en50221.c is used for two cases.
The first case is for writing APDU data in the function of "dvb_ca_en50221_io_write" at source/drivers/media/dvb-core/ dvb_ca_en50221.c.
The second case is for writing the host link buf size on the Command Register in the function of "dvb_ca_en50221_link_init" at source/drivers/media/dvb-core/dvb_ca_en50221.c.
In the second case, there exists a bug like following. In the function of the "dvb_ca_en50221_link_init",
after a TV host calculates the host link buf_size,
the TV host writes the calculated host link buf_size on the Size Register.
Accroding to the en50221 Spec (the page 60 of
https://dvb.org/wp-content/uploads/2020/02/En50221.V1.pdf),
before this writing operation, the "SW(CMDREG_SW)" flag in the Command Register should be set. We can see this setting operation in the function of the "dvb_ca_en50221_link_init" like below.
...

	if ((ret = ca->pub->write_cam_control(ca->pub, slot,
CTRLIF_COMMAND, IRQEN | CMDREG_SW)) != 0)
		return ret;

...
But, after that, the real writing operation is implemented using the function of the "dvb_ca_en50221_write_data" in the function of "dvb_ca_en50221_link_init", and the "dvb_ca_en50221_write_data" includes the function of "ca->pub->write_cam_control", and the function of the "ca->pub->write_cam_control" in the function of the "dvb_ca_en50221_wrte_data" does not include "CMDREG_SW" flag like below.
...

	if ((status = ca->pub->write_cam_control(ca->pub, slot,

CTRLIF_COMMAND, IRQEN | CMDREG_HC)) != 0)
...
In the above source code, we can see only the "IRQEN | CMDREG_HC", but we cannot see the "CMDREG_SW".
The "CMDREG_SW" flag which was set in the function of the "dvb_ca_en50221_link_init" was rollbacked by the follwoing function of the "dvb_ca_en50221_write_data".
This is a bug. and this bug causes that the calculated host link buf_size is not properly written in the CI module.
Through this patch, we fix this bug.

Signed-off-by YongSu Yoo <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/dvb-core/dvb_ca_en50221.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

drivers/media/dvb-core/dvb_ca_en50221.c +7 -5

index c2d2792227f86..b6ca29dfb184a 100644
@@ -187,7 +187,7 @@ static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca);
 static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot,
 				    u8 *ebuf, int ecount);
 static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot,
-				     u8 *ebuf, int ecount);
+				     u8 *ebuf, int ecount, int size_write_flag);
 
 /**
  * findstr - Safely find needle in haystack.

@@ -370,7 +370,7 @@ static int dvb_ca_en50221_link_init(struct dvb_ca_private *ca, int slot)
 	ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_FR, HZ / 10);
 	if (ret)
 		return ret;
-	ret = dvb_ca_en50221_write_data(ca, slot, buf, 2);
+	ret = dvb_ca_en50221_write_data(ca, slot, buf, 2, CMDREG_SW);
 	if (ret != 2)
 		return -EIO;
 	ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN);

@@ -778,11 +778,13 @@ static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot,
  * @buf: The data in this buffer is treated as a complete link-level packet to
  *	 be written.
  * @bytes_write: Size of ebuf.
+ * @size_write_flag: A flag on Command Register which says whether the link size
+ * information will be writen or not.
  *
  * return: Number of bytes written, or < 0 on error.
  */
 static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot,
-				     u8 *buf, int bytes_write)
+				     u8 *buf, int bytes_write, int size_write_flag)
 {
 	struct dvb_ca_slot *sl = &ca->slot_info[slot];
 	int status;

@@ -817,7 +819,7 @@ static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot,
 
 	/* OK, set HC bit */
 	status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND,
-					    IRQEN | CMDREG_HC);
+					    IRQEN | CMDREG_HC | size_write_flag);
 	if (status)
 		goto exit;

@@ -1508,7 +1510,7 @@ static ssize_t dvb_ca_en50221_io_write(struct file *file,
 
 			mutex_lock(&sl->slot_lock);
 			status = dvb_ca_en50221_write_data(ca, slot, fragbuf,
-							   fraglen + 2);
+							   fraglen + 2, 0);
 			mutex_unlock(&sl->slot_lock);
 			if (status == (fraglen + 2)) {
 				written = 1;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #99 lore raw

PATCH 99/225 media: ttusb-dec: fix memory leak in ttusb_dec_exit_dvb()

Link https://lore.kernel.org/linux-media/[email protected] open here

From: Hyunwoo Kim <[email protected]>

[ Upstream commit 517a281338322ff8293f988771c98aaa7205e457 ]

Since dvb_frontend_detach() is not called in ttusb_dec_exit_dvb(), which is called when the device is disconnected, dvb_frontend_free() is not finally called.

This causes a memory leak just by repeatedly plugging and unplugging the device.

Fix this issue by adding dvb_frontend_detach() to ttusb_dec_exit_dvb().

Signed-off-by Hyunwoo Kim <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/usb/ttusb-dec/ttusb_dec.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

drivers/media/usb/ttusb-dec/ttusb_dec.c +1 -2

index 38822cedd93a9..c4474d4c44e28 100644
@@ -1544,8 +1544,7 @@ static void ttusb_dec_exit_dvb(struct ttusb_dec *dec)
 	dvb_dmx_release(&dec->demux);
 	if (dec->fe) {
 		dvb_unregister_frontend(dec->fe);
-		if (dec->fe->ops.release)
-			dec->fe->ops.release(dec->fe);
+		dvb_frontend_detach(dec->fe);
 	}
 	dvb_unregister_adapter(&dec->adapter);
 }

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #100 lore raw

PATCH 100/225 media: mn88443x: fix !CONFIG_OF error by drop of_match_ptr from ID table

Link https://lore.kernel.org/linux-media/[email protected] open here

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit ae11c0efaec32fb45130ee9886689f467232eebc ]

The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error:

drivers/media/dvb-frontends/mn88443x.c:782:34: error: ‘mn88443x_of_match’ defined but not used [-Werror=unused-const-variable=]

Signed-off-by Krzysztof Kozlowski <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/dvb-frontends/mn88443x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/media/dvb-frontends/mn88443x.c +1 -1

index 452571b380b72..5a024870979de 100644
@@ -798,7 +798,7 @@ MODULE_DEVICE_TABLE(i2c, mn88443x_i2c_id);
 static struct i2c_driver mn88443x_driver = {
 	.driver = {
 		.name = "mn88443x",
-		.of_match_table = of_match_ptr(mn88443x_of_match),
+		.of_match_table = mn88443x_of_match,
 	},
 	.probe    = mn88443x_probe,
 	.remove   = mn88443x_remove,

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #101 lore raw

PATCH 101/225 media: dvb-core: Fix use-after-free due on race condition at dvb_net

Link https://lore.kernel.org/linux-media/[email protected] open here

From: Hyunwoo Kim <[email protected]>

[ Upstream commit 4172385b0c9ac366dcab78eda48c26814b87ed1a ]

A race condition may occur between the .disconnect function, which is called when the device is disconnected, and the dvb_device_open() function, which is called when the device node is open()ed. This results in several types of UAFs.

The root cause of this is that you use the dvb_device_open() function, which does not implement a conditional statement
that checks 'dvbnet->exit'.

So, add 'remove_mutex` to protect 'dvbnet->exit' and use locked_dvb_net_open() function to check 'dvbnet->exit'.

[mchehab: fix a checkpatch warning]

Signed-off-by Hyunwoo Kim <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/dvb-core/dvb_net.c | 38 +++++++++++++++++++++++++++++---
 include/media/dvb_net.h          |  4 ++++
 2 files changed, 39 insertions(+), 3 deletions(-)

drivers/media/dvb-core/dvb_net.c +35 -3

index 8a2febf33ce28..8bb8dd34c223e 100644
@@ -1564,15 +1564,43 @@ static long dvb_net_ioctl(struct file *file,
 	return dvb_usercopy(file, cmd, arg, dvb_net_do_ioctl);
 }
 
+static int locked_dvb_net_open(struct inode *inode, struct file *file)
+{
+	struct dvb_device *dvbdev = file->private_data;
+	struct dvb_net *dvbnet = dvbdev->priv;
+	int ret;
+
+	if (mutex_lock_interruptible(&dvbnet->remove_mutex))
+		return -ERESTARTSYS;
+
+	if (dvbnet->exit) {
+		mutex_unlock(&dvbnet->remove_mutex);
+		return -ENODEV;
+	}
+
+	ret = dvb_generic_open(inode, file);
+
+	mutex_unlock(&dvbnet->remove_mutex);
+
+	return ret;
+}
+
 static int dvb_net_close(struct inode *inode, struct file *file)
 {
 	struct dvb_device *dvbdev = file->private_data;
 	struct dvb_net *dvbnet = dvbdev->priv;
 
+	mutex_lock(&dvbnet->remove_mutex);
+
 	dvb_generic_release(inode, file);
 
-	if(dvbdev->users == 1 && dvbnet->exit == 1)
+	if (dvbdev->users == 1 && dvbnet->exit == 1) {
+		mutex_unlock(&dvbnet->remove_mutex);
 		wake_up(&dvbdev->wait_queue);
+	} else {
+		mutex_unlock(&dvbnet->remove_mutex);
+	}
+
 	return 0;
 }

@@ -1580,7 +1608,7 @@ static int dvb_net_close(struct inode *inode, struct file *file)
 static const struct file_operations dvb_net_fops = {
 	.owner = THIS_MODULE,
 	.unlocked_ioctl = dvb_net_ioctl,
-	.open =	dvb_generic_open,
+	.open =	locked_dvb_net_open,
 	.release = dvb_net_close,
 	.llseek = noop_llseek,
 };

@@ -1599,10 +1627,13 @@ void dvb_net_release (struct dvb_net *dvbnet)
 {
 	int i;
 
+	mutex_lock(&dvbnet->remove_mutex);
 	dvbnet->exit = 1;
+	mutex_unlock(&dvbnet->remove_mutex);
+
 	if (dvbnet->dvbdev->users < 1)
 		wait_event(dvbnet->dvbdev->wait_queue,
-				dvbnet->dvbdev->users==1);
+				dvbnet->dvbdev->users == 1);
 
 	dvb_unregister_device(dvbnet->dvbdev);

@@ -1621,6 +1652,7 @@ int dvb_net_init (struct dvb_adapter *adap, struct dvb_net *dvbnet,
 	int i;
 
 	mutex_init(&dvbnet->ioctl_mutex);
+	mutex_init(&dvbnet->remove_mutex);
 	dvbnet->demux = dmx;
 
 	for (i=0; i<DVB_NET_DEVICES_MAX; i++)

include/media/dvb_net.h +4 -0

index 5e31d37f25fac..cc01dffcc9f35 100644
@@ -41,6 +41,9 @@
  * @exit:		flag to indicate when the device is being removed.
  * @demux:		pointer to &struct dmx_demux.
  * @ioctl_mutex:	protect access to this struct.
+ * @remove_mutex:	mutex that avoids a race condition between a callback
+ *			called when the hardware is disconnected and the
+ *			file_operations of dvb_net.
  *
  * Currently, the core supports up to %DVB_NET_DEVICES_MAX (10) network
  * devices.

@@ -53,6 +56,7 @@ struct dvb_net {
 	unsigned int exit:1;
 	struct dmx_demux *demux;
 	struct mutex ioctl_mutex;
+	struct mutex remove_mutex;
 };
 
 /**

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #102 lore raw

PATCH 102/225 media: dvb-core: Fix use-after-free due to race at dvb_register_device()

Link https://lore.kernel.org/linux-media/[email protected] open here

From: Hyunwoo Kim <[email protected]>

[ Upstream commit 627bb528b086b4136315c25d6a447a98ea9448d3 ]

dvb_register_device() dynamically allocates fops with kmemdup() to set the fops->owner.
And these fops are registered in 'file->f_ops' using replace_fops() in the dvb_device_open() process, and kfree()d in dvb_free_device().

However, it is not common to use dynamically allocated fops instead of 'static const' fops as an argument of replace_fops(), and UAF may occur.
These UAFs can occur on any dvb type using dvb_register_device(), such as dvb_dvr, dvb_demux, dvb_frontend, dvb_net, etc.

So, instead of kfree() the fops dynamically allocated in dvb_register_device() in dvb_free_device() called during the .disconnect() process, kfree() it collectively in exit_dvbdev() called when the dvbdev.c module is removed.

Signed-off-by Hyunwoo Kim <[email protected]>

Reported-by Dan Carpenter <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/dvb-core/dvbdev.c | 84 ++++++++++++++++++++++++---------
 include/media/dvbdev.h          | 15 ++++++
 2 files changed, 78 insertions(+), 21 deletions(-)

drivers/media/dvb-core/dvbdev.c +63 ~~-21~~

index a31d52cb6d62c..9f9a976527080 100644
@@ -27,6 +27,7 @@
 #include <media/tuner.h>
 
 static DEFINE_MUTEX(dvbdev_mutex);
+static LIST_HEAD(dvbdevfops_list);
 static int dvbdev_debug;
 
 module_param(dvbdev_debug, int, 0644);

@@ -452,14 +453,15 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 			enum dvb_device_type type, int demux_sink_pads)
 {
 	struct dvb_device *dvbdev;
-	struct file_operations *dvbdevfops;
+	struct file_operations *dvbdevfops = NULL;
+	struct dvbdevfops_node *node = NULL, *new_node = NULL;
 	struct device *clsdev;
 	int minor;
 	int id, ret;
 
 	mutex_lock(&dvbdev_register_lock);
 
-	if ((id = dvbdev_get_free_id (adap, type)) < 0){
+	if ((id = dvbdev_get_free_id (adap, type)) < 0) {
 		mutex_unlock(&dvbdev_register_lock);
 		*pdvbdev = NULL;
 		pr_err("%s: couldn't find free device id\n", __func__);

@@ -467,18 +469,45 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 	}
 
 	*pdvbdev = dvbdev = kzalloc(sizeof(*dvbdev), GFP_KERNEL);
-
 	if (!dvbdev){
 		mutex_unlock(&dvbdev_register_lock);
 		return -ENOMEM;
 	}
 
-	dvbdevfops = kmemdup(template->fops, sizeof(*dvbdevfops), GFP_KERNEL);
+	/*
+	 * When a device of the same type is probe()d more than once,
+	 * the first allocated fops are used. This prevents memory leaks
+	 * that can occur when the same device is probe()d repeatedly.
+	 */
+	list_for_each_entry(node, &dvbdevfops_list, list_head) {
+		if (node->fops->owner == adap->module &&
+				node->type == type &&
+				node->template == template) {
+			dvbdevfops = node->fops;
+			break;
+		}
+	}
 
-	if (!dvbdevfops){
-		kfree (dvbdev);
-		mutex_unlock(&dvbdev_register_lock);
-		return -ENOMEM;
+	if (dvbdevfops == NULL) {
+		dvbdevfops = kmemdup(template->fops, sizeof(*dvbdevfops), GFP_KERNEL);
+		if (!dvbdevfops) {
+			kfree(dvbdev);
+			mutex_unlock(&dvbdev_register_lock);
+			return -ENOMEM;
+		}
+
+		new_node = kzalloc(sizeof(struct dvbdevfops_node), GFP_KERNEL);
+		if (!new_node) {
+			kfree(dvbdevfops);
+			kfree(dvbdev);
+			mutex_unlock(&dvbdev_register_lock);
+			return -ENOMEM;
+		}
+
+		new_node->fops = dvbdevfops;
+		new_node->type = type;
+		new_node->template = template;
+		list_add_tail (&new_node->list_head, &dvbdevfops_list);
 	}
 
 	memcpy(dvbdev, template, sizeof(struct dvb_device));

@@ -489,20 +518,20 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 	dvbdev->priv = priv;
 	dvbdev->fops = dvbdevfops;
 	init_waitqueue_head (&dvbdev->wait_queue);
-
 	dvbdevfops->owner = adap->module;
-
 	list_add_tail (&dvbdev->list_head, &adap->device_list);
-
 	down_write(&minor_rwsem);
 #ifdef CONFIG_DVB_DYNAMIC_MINORS
 	for (minor = 0; minor < MAX_DVB_MINORS; minor++)
 		if (dvb_minors[minor] == NULL)
 			break;
-
 	if (minor == MAX_DVB_MINORS) {
+		if (new_node) {
+			list_del (&new_node->list_head);
+			kfree(dvbdevfops);
+			kfree(new_node);
+		}
 		list_del (&dvbdev->list_head);
-		kfree(dvbdevfops);
 		kfree(dvbdev);
 		up_write(&minor_rwsem);
 		mutex_unlock(&dvbdev_register_lock);

@@ -511,41 +540,47 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 #else
 	minor = nums2minor(adap->num, type, id);
 #endif
-
 	dvbdev->minor = minor;
 	dvb_minors[minor] = dvb_device_get(dvbdev);
 	up_write(&minor_rwsem);
-
 	ret = dvb_register_media_device(dvbdev, type, minor, demux_sink_pads);
 	if (ret) {
 		pr_err("%s: dvb_register_media_device failed to create the mediagraph\n",
 		      __func__);
-
+		if (new_node) {
+			list_del (&new_node->list_head);
+			kfree(dvbdevfops);
+			kfree(new_node);
+		}
 		dvb_media_device_free(dvbdev);
 		list_del (&dvbdev->list_head);
-		kfree(dvbdevfops);
 		kfree(dvbdev);
 		mutex_unlock(&dvbdev_register_lock);
 		return ret;
 	}
 
-	mutex_unlock(&dvbdev_register_lock);
-
 	clsdev = device_create(dvb_class, adap->device,
 			       MKDEV(DVB_MAJOR, minor),
 			       dvbdev, "dvb%d.%s%d", adap->num, dnames[type], id);
 	if (IS_ERR(clsdev)) {
 		pr_err("%s: failed to create device dvb%d.%s%d (%ld)\n",
 		       __func__, adap->num, dnames[type], id, PTR_ERR(clsdev));
+		if (new_node) {
+			list_del (&new_node->list_head);
+			kfree(dvbdevfops);
+			kfree(new_node);
+		}
 		dvb_media_device_free(dvbdev);
 		list_del (&dvbdev->list_head);
-		kfree(dvbdevfops);
 		kfree(dvbdev);
+		mutex_unlock(&dvbdev_register_lock);
 		return PTR_ERR(clsdev);
 	}
+
 	dprintk("DVB: register adapter%d/%s%d @ minor: %i (0x%02x)\n",
 		adap->num, dnames[type], id, minor, minor);
 
+	mutex_unlock(&dvbdev_register_lock);
 	return 0;
 }
 EXPORT_SYMBOL(dvb_register_device);

@@ -574,7 +609,6 @@ static void dvb_free_device(struct kref *ref)
 {
 	struct dvb_device *dvbdev = container_of(ref, struct dvb_device, ref);
 
-	kfree (dvbdev->fops);
 	kfree (dvbdev);
 }

@@ -1080,9 +1114,17 @@ static int __init init_dvbdev(void)
 
 static void __exit exit_dvbdev(void)
 {
+	struct dvbdevfops_node *node, *next;
+
 	class_destroy(dvb_class);
 	cdev_del(&dvb_device_cdev);
 	unregister_chrdev_region(MKDEV(DVB_MAJOR, 0), MAX_DVB_MINORS);
+
+	list_for_each_entry_safe(node, next, &dvbdevfops_list, list_head) {
+		list_del (&node->list_head);
+		kfree(node->fops);
+		kfree(node);
+	}
 }
 
 subsys_initcall(init_dvbdev);

include/media/dvbdev.h +15 -0

index ac60c9fcfe9a6..34b01ebf32828 100644
@@ -189,6 +189,21 @@ struct dvb_device {
 	void *priv;
 };
 
+/**
+ * struct dvbdevfops_node - fops nodes registered in dvbdevfops_list
+ *
+ * @fops:		Dynamically allocated fops for ->owner registration
+ * @type:		type of dvb_device
+ * @template:		dvb_device used for registration
+ * @list_head:		list_head for dvbdevfops_list
+ */
+struct dvbdevfops_node {
+	struct file_operations *fops;
+	enum dvb_device_type type;
+	const struct dvb_device *template;
+	struct list_head list_head;
+};
+
 /**
  * dvb_device_get - Increase dvb_device reference
  *

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #103 lore raw

PATCH 103/225 media: dvb-core: Fix kernel WARNING for blocking operation in wait_event*()

Link https://lore.kernel.org/r/CA+UBctCu7fXn4q41O_3=id1+OdyQ85tZY1x+TkT-6OVBL6KAUw@mail.gmail.com/ open here

From: Takashi Iwai <[email protected]>

[ Upstream commit b8c75e4a1b325ea0a9433fa8834be97b5836b946 ]

Using a semaphore in the wait_event*() condition is no good idea. It hits a kernel WARN_ON() at prepare_to_wait_event() like:
do not call blocking ops when !TASK_RUNNING; state=1 set at prepare_to_wait_event+0x6d/0x690

For avoiding the potential deadlock, rewrite to an open-coded loop instead. Unlike the loop in wait_event*(), this uses wait_woken() after the condition check, hence the task state stays consistent.

CVE-2023-31084 was assigned to this bug.

Link https://lore.kernel.org/linux-media/[email protected] open here

Reported-by Yu Hao <[email protected]>

Closes https://nvd.nist.gov/vuln/detail/CVE-2023-31084

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/dvb-core/dvb_frontend.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

drivers/media/dvb-core/dvb_frontend.c +12 -4

index c41a7e5c2b928..fce0e20940780 100644
@@ -293,14 +293,22 @@ static int dvb_frontend_get_event(struct dvb_frontend *fe,
 	}
 
 	if (events->eventw == events->eventr) {
-		int ret;
+		struct wait_queue_entry wait;
+		int ret = 0;
 
 		if (flags & O_NONBLOCK)
 			return -EWOULDBLOCK;
 
-		ret = wait_event_interruptible(events->wait_queue,
-					       dvb_frontend_test_event(fepriv, events));
-
+		init_waitqueue_entry(&wait, current);
+		add_wait_queue(&events->wait_queue, &wait);
+		while (!dvb_frontend_test_event(fepriv, events)) {
+			wait_woken(&wait, TASK_INTERRUPTIBLE, 0);
+			if (signal_pending(current)) {
+				ret = -ERESTARTSYS;
+				break;
+			}
+		}
+		remove_wait_queue(&events->wait_queue, &wait);
 		if (ret < 0)
 			return ret;
 	}

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #104 lore raw

PATCH 104/225 media: dvb-core: Fix use-after-free due to race condition at dvb_ca_en50221

Link https://lore.kernel.org/linux-media/20221121063308.GA33821@ubuntu open here

From: Hyunwoo Kim <[email protected]>

[ Upstream commit 280a8ab81733da8bc442253c700a52c4c0886ffd ]

If the device node of dvb_ca_en50221 is open() and the device is disconnected, a UAF may occur when calling close() on the device node.

The root cause is that wake_up() and wait_event() for dvbdev->wait_queue are not implemented.

So implement wait_event() function in dvb_ca_en50221_release() and add 'remove_mutex' which prevents race condition for 'ca->exit'.

[mchehab: fix a checkpatch warning]

Signed-off-by Hyunwoo Kim <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/dvb-core/dvb_ca_en50221.c | 37 ++++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)

drivers/media/dvb-core/dvb_ca_en50221.c +36 -1

index b6ca29dfb184a..baf64540dc00a 100644
@@ -151,6 +151,12 @@ struct dvb_ca_private {
 
 	/* mutex serializing ioctls */
 	struct mutex ioctl_mutex;
+
+	/* A mutex used when a device is disconnected */
+	struct mutex remove_mutex;
+
+	/* Whether the device is disconnected */
+	int exit;
 };
 
 static void dvb_ca_private_free(struct dvb_ca_private *ca)

@@ -1711,12 +1717,22 @@ static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file)
 
 	dprintk("%s\n", __func__);
 
-	if (!try_module_get(ca->pub->owner))
+	mutex_lock(&ca->remove_mutex);
+
+	if (ca->exit) {
+		mutex_unlock(&ca->remove_mutex);
+		return -ENODEV;
+	}
+
+	if (!try_module_get(ca->pub->owner)) {
+		mutex_unlock(&ca->remove_mutex);
 		return -EIO;
+	}
 
 	err = dvb_generic_open(inode, file);
 	if (err < 0) {
 		module_put(ca->pub->owner);
+		mutex_unlock(&ca->remove_mutex);
 		return err;
 	}

@@ -1741,6 +1757,7 @@ static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file)
 
 	dvb_ca_private_get(ca);
 
+	mutex_unlock(&ca->remove_mutex);
 	return 0;
 }

@@ -1760,6 +1777,8 @@ static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file)
 
 	dprintk("%s\n", __func__);
 
+	mutex_lock(&ca->remove_mutex);
+
 	/* mark the CA device as closed */
 	ca->open = 0;
 	dvb_ca_en50221_thread_update_delay(ca);

@@ -1770,6 +1789,13 @@ static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file)
 
 	dvb_ca_private_put(ca);
 
+	if (dvbdev->users == 1 && ca->exit == 1) {
+		mutex_unlock(&ca->remove_mutex);
+		wake_up(&dvbdev->wait_queue);
+	} else {
+		mutex_unlock(&ca->remove_mutex);
+	}
+
 	return err;
 }

@@ -1893,6 +1919,7 @@ int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter,
 	}
 
 	mutex_init(&ca->ioctl_mutex);
+	mutex_init(&ca->remove_mutex);
 
 	if (signal_pending(current)) {
 		ret = -EINTR;

@@ -1935,6 +1962,14 @@ void dvb_ca_en50221_release(struct dvb_ca_en50221 *pubca)
 
 	dprintk("%s\n", __func__);
 
+	mutex_lock(&ca->remove_mutex);
+	ca->exit = 1;
+	mutex_unlock(&ca->remove_mutex);
+
+	if (ca->dvbdev->users < 1)
+		wait_event(ca->dvbdev->wait_queue,
+				ca->dvbdev->users == 1);
+
 	/* shutdown the thread if there was one */
 	kthread_stop(ca->thread);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #105 lore raw

PATCH 105/225 ASoC: SOF: debug: conditionally bump runtime_pm counter on exceptions

From: Pierre-Louis Bossart <[email protected]>

[ Upstream commit 3de975862f985f1c9e225a0d13aa3d501373f7c3 ]

When a firmware IPC error happens during a pm_runtime suspend, we ignore the error and suspend anyways. However, the code unconditionally increases the runtime_pm counter. This results in a confusing configuration where the code will suspend, resume but never suspend again due to the use of pm_runtime_get_noresume().

The intent of the counter increase was to prevent entry in D3, but if that transition to D3 is already started it cannot be stopped. In addition, there's no point in that case in trying to prevent anything, the firmware error is handled and the next resume will re-initialize the firmware completely.

This patch changes the logic to prevent suspend when the device is pm_runtime active and has a use_count > 0.

Signed-off-by Pierre-Louis Bossart <[email protected]

Reviewed-by Daniel Baluta <[email protected]

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Mark Brown <[email protected]

Signed-off-by Sasha Levin <[email protected]>

---
 sound/soc/sof/debug.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

sound/soc/sof/debug.c +2 -2

index ade0507328af4..5042312b1b98d 100644
@@ -437,8 +437,8 @@ void snd_sof_handle_fw_exception(struct snd_sof_dev *sdev, const char *msg)
 		/* should we prevent DSP entering D3 ? */
 		if (!sdev->ipc_dump_printed)
 			dev_info(sdev->dev,
-				 "preventing DSP entering D3 state to preserve context\n");
-		pm_runtime_get_noresume(sdev->dev);
+				 "Attempting to prevent DSP from entering D3 state to preserve context\n");
+		pm_runtime_get_if_in_use(sdev->dev);
 	}
 
 	/* dump vital information to the logs */

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #106 lore raw

PATCH 106/225 ASoC: SOF: pcm: fix pm_runtime imbalance in error handling

From: Pierre-Louis Bossart <[email protected]>

[ Upstream commit da0fe8fd515a471d373acc3682bfb5522cca4d55 ]

When an error occurs, we need to make sure the device can pm_runtime suspend instead of keeping it active.

Signed-off-by Pierre-Louis Bossart <[email protected]

Reviewed-by Daniel Baluta <[email protected]

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Mark Brown <[email protected]

Signed-off-by Sasha Levin <[email protected]>

---
 sound/soc/sof/pcm.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

sound/soc/sof/pcm.c +6 -5

index 14571b821ecac..be6f38af37b5d 100644
@@ -619,16 +619,17 @@ static int sof_pcm_probe(struct snd_soc_component *component)
 				       "%s/%s",
 				       plat_data->tplg_filename_prefix,
 				       plat_data->tplg_filename);
-	if (!tplg_filename)
-		return -ENOMEM;
+	if (!tplg_filename) {
+		ret = -ENOMEM;
+		goto pm_error;
+	}
 
 	ret = snd_sof_load_topology(component, tplg_filename);
-	if (ret < 0) {
+	if (ret < 0)
 		dev_err(component->dev, "error: failed to load DSP topology %d\n",
 			ret);
-		return ret;
-	}
 
+pm_error:
 	pm_runtime_mark_last_busy(component->dev);
 	pm_runtime_put_autosuspend(component->dev);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #107 lore raw

PATCH 107/225 ASoC: SOF: sof-client-probes: fix pm_runtime imbalance in error handling

From: Pierre-Louis Bossart <[email protected]>

[ Upstream commit bc424273c74c1565c459c8f2a6ed95caee368d0a ]

When an error occurs, we need to make sure the device can pm_runtime suspend instead of keeping it active.

Signed-off-by Pierre-Louis Bossart <[email protected]

Reviewed-by Daniel Baluta <[email protected]

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Mark Brown <[email protected]

Signed-off-by Sasha Levin <[email protected]>

---
 sound/soc/sof/sof-client-probes.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

sound/soc/sof/sof-client-probes.c +8 -6

index ddeabbb5580e1..1e521a9e34d27 100644
@@ -441,12 +441,7 @@ static ssize_t sof_probes_dfs_points_read(struct file *file, char __user *to,
 
 	ret = sof_probes_points_info(cdev, &desc, &num_desc);
 	if (ret < 0)
-		goto exit;
-
-	pm_runtime_mark_last_busy(dev);
-	err = pm_runtime_put_autosuspend(dev);
-	if (err < 0)
-		dev_err_ratelimited(dev, "debugfs read failed to idle %d\n", err);
+		goto pm_error;
 
 	for (i = 0; i < num_desc; i++) {
 		offset = strlen(buf);

@@ -464,6 +459,13 @@ static ssize_t sof_probes_dfs_points_read(struct file *file, char __user *to,
 	ret = simple_read_from_buffer(to, count, ppos, buf, strlen(buf));
 
 	kfree(desc);
+
+pm_error:
+	pm_runtime_mark_last_busy(dev);
+	err = pm_runtime_put_autosuspend(dev);
+	if (err < 0)
+		dev_err_ratelimited(dev, "debugfs read failed to idle %d\n", err);
+
 exit:
 	kfree(buf);
 	return ret;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #108 lore raw

PATCH 108/225 ASoC: SOF: pm: save io region state in case of errors in resume

Link https://github.com/thesofproject/linux/issues/4274

From: Kai Vehmanen <[email protected]>

[ Upstream commit 171b53be635ac15d4feafeb33946035649b1ca14 ]

If there are failures in DSP runtime resume, the device state will not reach active and this makes it impossible e.g. to retrieve a possible DSP panic dump via "exception" debugfs node. If CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE=y is set, the data in cache is stale. If debugfs cache is not used, the region simply cannot be read.

To allow debugging these scenarios, update the debugfs cache contents in resume error handler. User-space can then later retrieve DSP panic and other state via debugfs (requires SOF debugfs cache to be enabled in build).

Reported-by Curtis Malainey <[email protected]

Signed-off-by Kai Vehmanen <[email protected]

Reviewed-by Pierre-Louis Bossart <[email protected]

Reviewed-by Curtis Malainey <[email protected]

Reviewed-by Péter Ujfalusi <[email protected]

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Mark Brown <[email protected]

Signed-off-by Sasha Levin <[email protected]>

---
 sound/soc/sof/pm.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

sound/soc/sof/pm.c +13 -1

index 26ffcbb6e30f4..a1bfa5a37e2ad 100644
@@ -159,7 +159,7 @@ static int sof_resume(struct device *dev, bool runtime_resume)
 		ret = tplg_ops->set_up_all_pipelines(sdev, false);
 		if (ret < 0) {
 			dev_err(sdev->dev, "Failed to restore pipeline after resume %d\n", ret);
-			return ret;
+			goto setup_fail;
 		}
 	}

@@ -173,6 +173,18 @@ static int sof_resume(struct device *dev, bool runtime_resume)
 			dev_err(sdev->dev, "ctx_restore IPC error during resume: %d\n", ret);
 	}
 
+setup_fail:
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE)
+	if (ret < 0) {
+		/*
+		 * Debugfs cannot be read in runtime suspend, so cache
+		 * the contents upon failure. This allows to capture
+		 * possible DSP coredump information.
+		 */
+		sof_cache_debugfs(sdev);
+	}
+#endif
+
 	return ret;
 }

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #109 lore raw

PATCH 109/225 s390/pkey: zeroize key blobs

From: Holger Dengler <[email protected]>

[ Upstream commit 844cf829e5f33e00b279230470c8c93b58b8c16f ]

Key blobs for the IOCTLs PKEY_KBLOB2PROTK[23] may contain clear key material. Zeroize the copies of these keys in kernel memory after creating the protected key.

Reviewed-by Harald Freudenberger <[email protected]>

Signed-off-by Holger Dengler <[email protected]>

Signed-off-by Alexander Gordeev <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/s390/crypto/pkey_api.c | 3 +++
 1 file changed, 3 insertions(+)

drivers/s390/crypto/pkey_api.c +3 -0

index 5a05d1cdfec20..a8def50c149bd 100644
@@ -1293,6 +1293,7 @@ static long pkey_unlocked_ioctl(struct file *filp, unsigned int cmd,
 			return PTR_ERR(kkey);
 		rc = pkey_keyblob2pkey(kkey, ktp.keylen, &ktp.protkey);
 		DEBUG_DBG("%s pkey_keyblob2pkey()=%d\n", __func__, rc);
+		memzero_explicit(kkey, ktp.keylen);
 		kfree(kkey);
 		if (rc)
 			break;

@@ -1426,6 +1427,7 @@ static long pkey_unlocked_ioctl(struct file *filp, unsigned int cmd,
 					kkey, ktp.keylen, &ktp.protkey);
 		DEBUG_DBG("%s pkey_keyblob2pkey2()=%d\n", __func__, rc);
 		kfree(apqns);
+		memzero_explicit(kkey, ktp.keylen);
 		kfree(kkey);
 		if (rc)
 			break;

@@ -1552,6 +1554,7 @@ static long pkey_unlocked_ioctl(struct file *filp, unsigned int cmd,
 					protkey, &protkeylen);
 		DEBUG_DBG("%s pkey_keyblob2pkey3()=%d\n", __func__, rc);
 		kfree(apqns);
+		memzero_explicit(kkey, ktp.keylen);
 		kfree(kkey);
 		if (rc) {
 			kfree(protkey);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #110 lore raw

PATCH 110/225 s390/topology: honour nr_cpu_ids when adding CPUs

From: Alexander Gordeev <[email protected]>

[ Upstream commit a33239be2d38ff5a44427db1707c08787508d34a ]

When SMT thread CPUs are added to CPU masks the nr_cpu_ids limit is not checked and could be exceeded. This leads to a warning for example if CONFIG_DEBUG_PER_CPU_MAPS is set and the command line parameter nr_cpus is set to 1.

Reviewed-by Heiko Carstens <[email protected]>

Signed-off-by Alexander Gordeev <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 arch/s390/kernel/topology.c | 32 +++++++++++++++++---------------
 1 file changed, 17 insertions(+), 15 deletions(-)

arch/s390/kernel/topology.c +17 ~~-15~~

index c6eecd4a5302d..10b20aeb27d3b 100644
@@ -95,7 +95,7 @@ static void cpu_group_map(cpumask_t *dst, struct mask_info *info, unsigned int c
 static void cpu_thread_map(cpumask_t *dst, unsigned int cpu)
 {
 	static cpumask_t mask;
-	int i;
+	unsigned int max_cpu;
 
 	cpumask_clear(&mask);
 	if (!cpumask_test_cpu(cpu, &cpu_setup_mask))

@@ -104,9 +104,10 @@ static void cpu_thread_map(cpumask_t *dst, unsigned int cpu)
 	if (topology_mode != TOPOLOGY_MODE_HW)
 		goto out;
 	cpu -= cpu % (smp_cpu_mtid + 1);
-	for (i = 0; i <= smp_cpu_mtid; i++) {
-		if (cpumask_test_cpu(cpu + i, &cpu_setup_mask))
-			cpumask_set_cpu(cpu + i, &mask);
+	max_cpu = min(cpu + smp_cpu_mtid, nr_cpu_ids - 1);
+	for (; cpu <= max_cpu; cpu++) {
+		if (cpumask_test_cpu(cpu, &cpu_setup_mask))
+			cpumask_set_cpu(cpu, &mask);
 	}
 out:
 	cpumask_copy(dst, &mask);

@@ -123,25 +124,26 @@ static void add_cpus_to_mask(struct topology_core *tl_core,
 	unsigned int core;
 
 	for_each_set_bit(core, &tl_core->mask, TOPOLOGY_CORE_BITS) {
-		unsigned int rcore;
-		int lcpu, i;
+		unsigned int max_cpu, rcore;
+		int cpu;
 
 		rcore = TOPOLOGY_CORE_BITS - 1 - core + tl_core->origin;
-		lcpu = smp_find_processor_id(rcore << smp_cpu_mt_shift);
-		if (lcpu < 0)
+		cpu = smp_find_processor_id(rcore << smp_cpu_mt_shift);
+		if (cpu < 0)
 			continue;
-		for (i = 0; i <= smp_cpu_mtid; i++) {
-			topo = &cpu_topology[lcpu + i];
+		max_cpu = min(cpu + smp_cpu_mtid, nr_cpu_ids - 1);
+		for (; cpu <= max_cpu; cpu++) {
+			topo = &cpu_topology[cpu];
 			topo->drawer_id = drawer->id;
 			topo->book_id = book->id;
 			topo->socket_id = socket->id;
 			topo->core_id = rcore;
-			topo->thread_id = lcpu + i;
+			topo->thread_id = cpu;
 			topo->dedicated = tl_core->d;
-			cpumask_set_cpu(lcpu + i, &drawer->mask);
-			cpumask_set_cpu(lcpu + i, &book->mask);
-			cpumask_set_cpu(lcpu + i, &socket->mask);
-			smp_cpu_set_polarization(lcpu + i, tl_core->pp);
+			cpumask_set_cpu(cpu, &drawer->mask);
+			cpumask_set_cpu(cpu, &book->mask);
+			cpumask_set_cpu(cpu, &socket->mask);
+			smp_cpu_set_polarization(cpu, tl_core->pp);
 		}
 	}
 }

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #111 lore raw

PATCH 111/225 ACPI: resource: Add IRQ override quirk for LG UltraPC 17U70P

Link https://bugzilla.kernel.org/show_bug.cgi?id=213031

From: Rubén Gómez <[email protected]>

[ Upstream commit 71a485624c4cbb144169852d7bb8ca8c0667d7a3 ]

Add an ACPI IRQ override quirk for LG UltraPC 17U70P to address the internal keyboard problem on it.

Link https://bugzilla.kernel.org/show_bug.cgi?id=216983

Signed-off-by Rubén Gómez Agudo <[email protected]>

[ rjw: Subject, changelog, white space damage fixes ]

Signed-off-by Rafael J. Wysocki <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/acpi/resource.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

drivers/acpi/resource.c +12 -0

index d08818baea88f..a7f12bdbc5e25 100644
@@ -502,6 +502,17 @@ static const struct dmi_system_id maingear_laptop[] = {
 	{ }
 };
 
+static const struct dmi_system_id lg_laptop[] = {
+	{
+		.ident = "LG Electronics 17U70P",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
+			DMI_MATCH(DMI_BOARD_NAME, "17U70P"),
+		},
+	},
+	{ }
+};
+
 struct irq_override_cmp {
 	const struct dmi_system_id *system;
 	unsigned char irq;

@@ -518,6 +529,7 @@ static const struct irq_override_cmp override_table[] = {
 	{ lenovo_laptop, 10, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, true },
 	{ tongfang_gm_rg, 1, ACPI_EDGE_SENSITIVE, ACPI_ACTIVE_LOW, 1, true },
 	{ maingear_laptop, 1, ACPI_EDGE_SENSITIVE, ACPI_ACTIVE_LOW, 1, true },
+	{ lg_laptop, 1, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, false },
 };
 
 static bool acpi_dev_irq_override(u32 gsi, u8 triggering, u8 polarity,

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #112 lore raw

PATCH 112/225 wifi: rtl8xxxu: fix authentication timeout due to incorrect RCR value

Link https://lore.kernel.org/all/[email protected] open here

From: Yun Lu <[email protected]>

[ Upstream commit 20429444e653ee8242dfbf815c0c37866beb371b ]

When using rtl8192cu with rtl8xxxu driver to connect wifi, there is a probability of failure, which shows "authentication with ... timed out". Through debugging, it was found that the RCR register has been inexplicably modified to an incorrect value, resulting in the nic not being able to receive authenticated frames.

To fix this problem, add regrcr in rtl8xxxu_priv struct, and store the RCR value every time the register is written, and use it the next time the register need to be modified.

Signed-off-by Yun Lu <[email protected]>

Signed-off-by Kalle Valo <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h      | 1 +
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 4 +++-
 2 files changed, 4 insertions(+), 1 deletion(-)

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +1 -0

index 1ba66b8f70c95..cda3b802e89dd 100644
@@ -1346,6 +1346,7 @@ struct rtl8xxxu_priv {
 	u32 rege9c;
 	u32 regeb4;
 	u32 regebc;
+	u32 regrcr;
 	int next_mbox;
 	int nr_out_eps;

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +3 -1

index 95c0150f23569..3a9fa3ff37acc 100644
@@ -4049,6 +4049,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 		RCR_ACCEPT_MGMT_FRAME | RCR_HTC_LOC_CTRL |
 		RCR_APPEND_PHYSTAT | RCR_APPEND_ICV | RCR_APPEND_MIC;
 	rtl8xxxu_write32(priv, REG_RCR, val32);
+	priv->regrcr = val32;
 
 	/*
 	 * Accept all multicast

@@ -6058,7 +6059,7 @@ static void rtl8xxxu_configure_filter(struct ieee80211_hw *hw,
 				      unsigned int *total_flags, u64 multicast)
 {
 	struct rtl8xxxu_priv *priv = hw->priv;
-	u32 rcr = rtl8xxxu_read32(priv, REG_RCR);
+	u32 rcr = priv->regrcr;
 
 	dev_dbg(&priv->udev->dev, "%s: changed_flags %08x, total_flags %08x\n",
 		__func__, changed_flags, *total_flags);

@@ -6104,6 +6105,7 @@ static void rtl8xxxu_configure_filter(struct ieee80211_hw *hw,
 	 */
 
 	rtl8xxxu_write32(priv, REG_RCR, rcr);
+	priv->regrcr = rcr;
 
 	*total_flags &= (FIF_ALLMULTI | FIF_FCSFAIL | FIF_BCN_PRBRESP_PROMISC |
 			 FIF_CONTROL | FIF_OTHER_BSS | FIF_PSPOLL |

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #113 lore raw

PATCH 113/225 ARM: dts: stm32: add pin map for CAN controller on stm32f7

Link https://lore.kernel.org/all/[email protected] open here

From: Dario Binacchi <[email protected]>

[ Upstream commit 011644249686f2675e142519cd59e81e04cfc231 ]

Add pin configurations for using CAN controller on stm32f7.

Signed-off-by Dario Binacchi <[email protected]>

Signed-off-by Marc Kleine-Budde <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 82 ++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)

arch/arm/boot/dts/stm32f7-pinctrl.dtsi +82 -0

index 8f37aefa73150..000278ec2c58f 100644
@@ -284,6 +284,88 @@
 					slew-rate = <2>;
 				};
 			};
+
+			can1_pins_a: can1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 11, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+				};
+			};
+
+			can1_pins_b: can1-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 9, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 8, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+				};
+			};
+
+			can1_pins_c: can1-2 {
+				pins1 {
+					pinmux = <STM32_PINMUX('D', 1, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 0, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+
+				};
+			};
+
+			can1_pins_d: can1-3 {
+				pins1 {
+					pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+
+				};
+			};
+
+			can2_pins_a: can2-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 6, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
+
+			can2_pins_b: can2-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 12, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
+
+			can3_pins_a: can3-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 15, AF11)>; /* CAN3_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 8, AF11)>; /* CAN3_RX */
+					bias-pull-up;
+				};
+			};
+
+			can3_pins_b: can3-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 4, AF11)>;  /* CAN3_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 3, AF11)>; /* CAN3_RX */
+					bias-pull-up;
+				};
+			};
 		};
 	};
 };

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:41 UTC #114 lore raw

PATCH 114/225 arm64/mm: mark private VM_FAULT_X defines as vm_fault_t

From: Min-Hua Chen <[email protected]>

[ Upstream commit d91d580878064b880f3574ac35b98d8b70ee8620 ]

This patch fixes several sparse warnings for fault.c:

arch/arm64/mm/fault.c:493:24: sparse: warning: incorrect type in return expression (different base types)
arch/arm64/mm/fault.c:493:24: sparse: expected restricted vm_fault_t
arch/arm64/mm/fault.c:493:24: sparse: got int
arch/arm64/mm/fault.c:501:32: sparse: warning: incorrect type in return expression (different base types)
arch/arm64/mm/fault.c:501:32: sparse: expected restricted vm_fault_t
arch/arm64/mm/fault.c:501:32: sparse: got int
arch/arm64/mm/fault.c:503:32: sparse: warning: incorrect type in return expression (different base types)
arch/arm64/mm/fault.c:503:32: sparse: expected restricted vm_fault_t
arch/arm64/mm/fault.c:503:32: sparse: got int
arch/arm64/mm/fault.c:511:24: sparse: warning: incorrect type in return expression (different base types)
arch/arm64/mm/fault.c:511:24: sparse: expected restricted vm_fault_t
arch/arm64/mm/fault.c:511:24: sparse: got int
arch/arm64/mm/fault.c:670:13: sparse: warning: restricted vm_fault_t degrades to integer arch/arm64/mm/fault.c:670:13: sparse: warning: restricted vm_fault_t degrades to integer arch/arm64/mm/fault.c:713:39: sparse: warning: restricted vm_fault_t degrades to integer

Signed-off-by Min-Hua Chen <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Will Deacon <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 arch/arm64/mm/fault.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

arch/arm64/mm/fault.c +2 -2

index 4ee20280133e4..2fef1fa93e7b6 100644
@@ -480,8 +480,8 @@ static void do_bad_area(unsigned long far, unsigned long esr,
 	}
 }
 
-#define VM_FAULT_BADMAP		0x010000
-#define VM_FAULT_BADACCESS	0x020000
+#define VM_FAULT_BADMAP		((__force vm_fault_t)0x010000)
+#define VM_FAULT_BADACCESS	((__force vm_fault_t)0x020000)
 
 static vm_fault_t __do_page_fault(struct mm_struct *mm, unsigned long addr,
 				  unsigned int mm_flags, unsigned long vm_flags,

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #115 lore raw

PATCH 115/225 arm64: vdso: Pass (void *) to virt_to_page()

Link http://lists.infradead.org/pipermail/linux-arm-kernel/2023-May/832583.html

From: Linus Walleij <[email protected]>

[ Upstream commit b0abde80620f42d1ceb3de5e4c1a49cdd5628229 ]

Like the other calls in this function virt_to_page() expects a pointer, not an integer.

However since many architectures implement virt_to_pfn() as a macro, this function becomes polymorphic and accepts both a (unsigned long) and a (void *).

Fix this up with an explicit cast.

Signed-off-by Linus Walleij <[email protected]>

Signed-off-by Will Deacon <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 arch/arm64/kernel/vdso.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

arch/arm64/kernel/vdso.c +1 -1

index 99ae81ab91a74..6ebb8dea5f09e 100644
@@ -312,7 +312,7 @@ static int aarch32_alloc_kuser_vdso_page(void)
 
 	memcpy((void *)(vdso_page + 0x1000 - kuser_sz), __kuser_helper_start,
 	       kuser_sz);
-	aarch32_vectors_page = virt_to_page(vdso_page);
+	aarch32_vectors_page = virt_to_page((void *)vdso_page);
 	return 0;
 }

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #116 lore raw

PATCH 116/225 wifi: mac80211: simplify chanctx allocation

From: Johannes Berg <[email protected]>

[ Upstream commit 860e1b43da94551cd1e73adc36b3c64cc3e5dc01 ]

There's no need to call ieee80211_recalc_chanctx_min_def() since it cannot and won't call the driver anyway; just use _ieee80211_recalc_chanctx_min_def() instead.

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 net/mac80211/chan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

net/mac80211/chan.c +1 -1

index e72cf0749d492..76c6decb0762c 100644
@@ -638,7 +638,7 @@ ieee80211_alloc_chanctx(struct ieee80211_local *local,
 	ctx->conf.rx_chains_dynamic = 1;
 	ctx->mode = mode;
 	ctx->conf.radar_enabled = false;
-	ieee80211_recalc_chanctx_min_def(local, ctx);
+	_ieee80211_recalc_chanctx_min_def(local, ctx);
 
 	return ctx;
 }

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:43 UTC #117 lore raw

PATCH 117/225 wifi: mac80211: consider reserved chanctx for mindef

From: Johannes Berg <[email protected]>

[ Upstream commit b72a455a2409fd94d6d9b4eb51d659a88213243b ]

When a chanctx is reserved for a new vif and we recalculate the minimal definition for it, we need to consider the new interface it's being reserved for before we assign it, so it can be used directly with the correct min channel width.

Fix the code to - optionally - consider that, and use that option just before doing the reassignment.

Also, when considering channel context reservations, we should only consider the one link we're currently working with. Change the boolean argument to a link pointer to do that.

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 net/mac80211/chan.c        | 72 +++++++++++++++++++++++---------------
 net/mac80211/ieee80211_i.h |  3 +-
 net/mac80211/util.c        |  2 +-
 3 files changed, 47 insertions(+), 30 deletions(-)

net/mac80211/chan.c +44 ~~-28~~

index 76c6decb0762c..c5d345e53056a 100644
@@ -258,7 +258,8 @@ ieee80211_get_max_required_bw(struct ieee80211_sub_if_data *sdata,
 
 static enum nl80211_chan_width
 ieee80211_get_chanctx_vif_max_required_bw(struct ieee80211_sub_if_data *sdata,
-					  struct ieee80211_chanctx_conf *conf)
+					  struct ieee80211_chanctx *ctx,
+					  struct ieee80211_link_data *rsvd_for)
 {
 	enum nl80211_chan_width max_bw = NL80211_CHAN_WIDTH_20_NOHT;
 	struct ieee80211_vif *vif = &sdata->vif;

@@ -267,13 +268,14 @@ ieee80211_get_chanctx_vif_max_required_bw(struct ieee80211_sub_if_data *sdata,
 	rcu_read_lock();
 	for (link_id = 0; link_id < ARRAY_SIZE(sdata->link); link_id++) {
 		enum nl80211_chan_width width = NL80211_CHAN_WIDTH_20_NOHT;
-		struct ieee80211_bss_conf *link_conf =
-			rcu_dereference(sdata->vif.link_conf[link_id]);
+		struct ieee80211_link_data *link =
+			rcu_dereference(sdata->link[link_id]);
 
-		if (!link_conf)
+		if (!link)
 			continue;
 
-		if (rcu_access_pointer(link_conf->chanctx_conf) != conf)
+		if (link != rsvd_for &&
+		    rcu_access_pointer(link->conf->chanctx_conf) != &ctx->conf)
 			continue;
 
 		switch (vif->type) {

@@ -287,7 +289,7 @@ ieee80211_get_chanctx_vif_max_required_bw(struct ieee80211_sub_if_data *sdata,
 			 * point, so take the width from the chandef, but
 			 * account also for TDLS peers
 			 */
-			width = max(link_conf->chandef.width,
+			width = max(link->conf->chandef.width,
 				    ieee80211_get_max_required_bw(sdata, link_id));
 			break;
 		case NL80211_IFTYPE_P2P_DEVICE:

@@ -296,7 +298,7 @@ ieee80211_get_chanctx_vif_max_required_bw(struct ieee80211_sub_if_data *sdata,
 		case NL80211_IFTYPE_ADHOC:
 		case NL80211_IFTYPE_MESH_POINT:
 		case NL80211_IFTYPE_OCB:
-			width = link_conf->chandef.width;
+			width = link->conf->chandef.width;
 			break;
 		case NL80211_IFTYPE_WDS:
 		case NL80211_IFTYPE_UNSPECIFIED:

@@ -316,7 +318,8 @@ ieee80211_get_chanctx_vif_max_required_bw(struct ieee80211_sub_if_data *sdata,
 
 static enum nl80211_chan_width
 ieee80211_get_chanctx_max_required_bw(struct ieee80211_local *local,
-				      struct ieee80211_chanctx_conf *conf)
+				      struct ieee80211_chanctx *ctx,
+				      struct ieee80211_link_data *rsvd_for)
 {
 	struct ieee80211_sub_if_data *sdata;
 	enum nl80211_chan_width max_bw = NL80211_CHAN_WIDTH_20_NOHT;

@@ -328,7 +331,8 @@ ieee80211_get_chanctx_max_required_bw(struct ieee80211_local *local,
 		if (!ieee80211_sdata_running(sdata))
 			continue;
 
-		width = ieee80211_get_chanctx_vif_max_required_bw(sdata, conf);
+		width = ieee80211_get_chanctx_vif_max_required_bw(sdata, ctx,
+								  rsvd_for);
 
 		max_bw = max(max_bw, width);
 	}

@@ -336,8 +340,8 @@ ieee80211_get_chanctx_max_required_bw(struct ieee80211_local *local,
 	/* use the configured bandwidth in case of monitor interface */
 	sdata = rcu_dereference(local->monitor_sdata);
 	if (sdata &&
-	    rcu_access_pointer(sdata->vif.bss_conf.chanctx_conf) == conf)
-		max_bw = max(max_bw, conf->def.width);
+	    rcu_access_pointer(sdata->vif.bss_conf.chanctx_conf) == &ctx->conf)
+		max_bw = max(max_bw, ctx->conf.def.width);
 
 	rcu_read_unlock();

@@ -349,8 +353,10 @@ ieee80211_get_chanctx_max_required_bw(struct ieee80211_local *local,
  * the max of min required widths of all the interfaces bound to this
  * channel context.
  */
-static u32 _ieee80211_recalc_chanctx_min_def(struct ieee80211_local *local,
-					     struct ieee80211_chanctx *ctx)
+static u32
+_ieee80211_recalc_chanctx_min_def(struct ieee80211_local *local,
+				  struct ieee80211_chanctx *ctx,
+				  struct ieee80211_link_data *rsvd_for)
 {
 	enum nl80211_chan_width max_bw;
 	struct cfg80211_chan_def min_def;

@@ -370,7 +376,7 @@ static u32 _ieee80211_recalc_chanctx_min_def(struct ieee80211_local *local,
 		return 0;
 	}
 
-	max_bw = ieee80211_get_chanctx_max_required_bw(local, &ctx->conf);
+	max_bw = ieee80211_get_chanctx_max_required_bw(local, ctx, rsvd_for);
 
 	/* downgrade chandef up to max_bw */
 	min_def = ctx->conf.def;

@@ -448,9 +454,10 @@ static void ieee80211_chan_bw_change(struct ieee80211_local *local,
  * channel context.
  */
 void ieee80211_recalc_chanctx_min_def(struct ieee80211_local *local,
-				      struct ieee80211_chanctx *ctx)
+				      struct ieee80211_chanctx *ctx,
+				      struct ieee80211_link_data *rsvd_for)
 {
-	u32 changed = _ieee80211_recalc_chanctx_min_def(local, ctx);
+	u32 changed = _ieee80211_recalc_chanctx_min_def(local, ctx, rsvd_for);
 
 	if (!changed)
 		return;

@@ -464,10 +471,11 @@ void ieee80211_recalc_chanctx_min_def(struct ieee80211_local *local,
 	ieee80211_chan_bw_change(local, ctx, false);
 }
 
-static void ieee80211_change_chanctx(struct ieee80211_local *local,
-				     struct ieee80211_chanctx *ctx,
-				     struct ieee80211_chanctx *old_ctx,
-				     const struct cfg80211_chan_def *chandef)
+static void _ieee80211_change_chanctx(struct ieee80211_local *local,
+				      struct ieee80211_chanctx *ctx,
+				      struct ieee80211_chanctx *old_ctx,
+				      const struct cfg80211_chan_def *chandef,
+				      struct ieee80211_link_data *rsvd_for)
 {
 	u32 changed;

@@ -492,7 +500,7 @@ static void ieee80211_change_chanctx(struct ieee80211_local *local,
 	ieee80211_chan_bw_change(local, old_ctx, true);
 
 	if (cfg80211_chandef_identical(&ctx->conf.def, chandef)) {
-		ieee80211_recalc_chanctx_min_def(local, ctx);
+		ieee80211_recalc_chanctx_min_def(local, ctx, rsvd_for);
 		return;
 	}

@@ -502,7 +510,7 @@ static void ieee80211_change_chanctx(struct ieee80211_local *local,
 
 	/* check if min chanctx also changed */
 	changed = IEEE80211_CHANCTX_CHANGE_WIDTH |
-		  _ieee80211_recalc_chanctx_min_def(local, ctx);
+		  _ieee80211_recalc_chanctx_min_def(local, ctx, rsvd_for);
 	drv_change_chanctx(local, ctx, changed);
 
 	if (!local->use_chanctx) {

@@ -514,6 +522,14 @@ static void ieee80211_change_chanctx(struct ieee80211_local *local,
 	ieee80211_chan_bw_change(local, old_ctx, false);
 }
 
+static void ieee80211_change_chanctx(struct ieee80211_local *local,
+				     struct ieee80211_chanctx *ctx,
+				     struct ieee80211_chanctx *old_ctx,
+				     const struct cfg80211_chan_def *chandef)
+{
+	_ieee80211_change_chanctx(local, ctx, old_ctx, chandef, NULL);
+}
+
 static struct ieee80211_chanctx *
 ieee80211_find_chanctx(struct ieee80211_local *local,
 		       const struct cfg80211_chan_def *chandef,

@@ -638,7 +654,7 @@ ieee80211_alloc_chanctx(struct ieee80211_local *local,
 	ctx->conf.rx_chains_dynamic = 1;
 	ctx->mode = mode;
 	ctx->conf.radar_enabled = false;
-	_ieee80211_recalc_chanctx_min_def(local, ctx);
+	_ieee80211_recalc_chanctx_min_def(local, ctx, NULL);
 
 	return ctx;
 }

@@ -873,12 +889,12 @@ static int ieee80211_assign_link_chanctx(struct ieee80211_link_data *link,
 		ieee80211_recalc_chanctx_chantype(local, curr_ctx);
 		ieee80211_recalc_smps_chanctx(local, curr_ctx);
 		ieee80211_recalc_radar_chanctx(local, curr_ctx);
-		ieee80211_recalc_chanctx_min_def(local, curr_ctx);
+		ieee80211_recalc_chanctx_min_def(local, curr_ctx, NULL);
 	}
 
 	if (new_ctx && ieee80211_chanctx_num_assigned(local, new_ctx) > 0) {
 		ieee80211_recalc_txpower(sdata, false);
-		ieee80211_recalc_chanctx_min_def(local, new_ctx);
+		ieee80211_recalc_chanctx_min_def(local, new_ctx, NULL);
 	}
 
 	if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE &&

@@ -1270,7 +1286,7 @@ ieee80211_link_use_reserved_reassign(struct ieee80211_link_data *link)
 
 	ieee80211_link_update_chandef(link, &link->reserved_chandef);
 
-	ieee80211_change_chanctx(local, new_ctx, old_ctx, chandef);
+	_ieee80211_change_chanctx(local, new_ctx, old_ctx, chandef, link);
 
 	vif_chsw[0].vif = &sdata->vif;
 	vif_chsw[0].old_ctx = &old_ctx->conf;

@@ -1300,7 +1316,7 @@ ieee80211_link_use_reserved_reassign(struct ieee80211_link_data *link)
 	if (ieee80211_chanctx_refcount(local, old_ctx) == 0)
 		ieee80211_free_chanctx(local, old_ctx);
 
-	ieee80211_recalc_chanctx_min_def(local, new_ctx);
+	ieee80211_recalc_chanctx_min_def(local, new_ctx, NULL);
 	ieee80211_recalc_smps_chanctx(local, new_ctx);
 	ieee80211_recalc_radar_chanctx(local, new_ctx);

@@ -1665,7 +1681,7 @@ static int ieee80211_vif_use_reserved_switch(struct ieee80211_local *local)
 		ieee80211_recalc_chanctx_chantype(local, ctx);
 		ieee80211_recalc_smps_chanctx(local, ctx);
 		ieee80211_recalc_radar_chanctx(local, ctx);
-		ieee80211_recalc_chanctx_min_def(local, ctx);
+		ieee80211_recalc_chanctx_min_def(local, ctx, NULL);
 
 		list_for_each_entry_safe(link, link_tmp, &ctx->reserved_links,
 					 reserved_chanctx_list) {

net/mac80211/ieee80211_i.h +2 -1

index e57001e00a3d0..27479bbb093ac 100644
@@ -2475,7 +2475,8 @@ int ieee80211_chanctx_refcount(struct ieee80211_local *local,
 void ieee80211_recalc_smps_chanctx(struct ieee80211_local *local,
 				   struct ieee80211_chanctx *chanctx);
 void ieee80211_recalc_chanctx_min_def(struct ieee80211_local *local,
-				      struct ieee80211_chanctx *ctx);
+				      struct ieee80211_chanctx *ctx,
+				      struct ieee80211_link_data *rsvd_for);
 bool ieee80211_is_radar_required(struct ieee80211_local *local);
 
 void ieee80211_dfs_cac_timer(unsigned long data);

net/mac80211/util.c +1 -1

index 0785d9393e718..784b9ba61581e 100644
@@ -2899,7 +2899,7 @@ void ieee80211_recalc_min_chandef(struct ieee80211_sub_if_data *sdata,
 
 		chanctx = container_of(chanctx_conf, struct ieee80211_chanctx,
 				       conf);
-		ieee80211_recalc_chanctx_min_def(local, chanctx);
+		ieee80211_recalc_chanctx_min_def(local, chanctx, NULL);
 	}
  unlock:
 	mutex_unlock(&local->chanctx_mtx);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #118 lore raw

PATCH 118/225 wifi: mac80211: recalc chanctx mindef before assigning

From: Johannes Berg <[email protected]>

[ Upstream commit 04312de4ced4b152749614e8179f3978a20a992f ]

When we allocate a new channel context, or find an existing one that is compatible, we currently assign it to a link before its mindef is updated. This leads to strange situations, especially in link switching where you switch to an 80 MHz link and expect it to be active immediately, but the mindef is still configured to 20 MHz while assigning. Also, it's strange that the chandef passed to the assign method's argument is wider than the one in the context.

Fix this by calculating the mindef with the new link considered before calling the driver.

In particular, this fixes an iwlwifi problem during link switch where the firmware would assert because the (link) station that was added for the AP is configured to transmit at a bandwidth that's wider than the channel context that it's configured on.

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 net/mac80211/chan.c | 3 +++
 1 file changed, 3 insertions(+)

net/mac80211/chan.c +3 -0

index c5d345e53056a..f07e34bed8f3a 100644
@@ -871,6 +871,9 @@ static int ieee80211_assign_link_chanctx(struct ieee80211_link_data *link,
 	}
 
 	if (new_ctx) {
+		/* recalc considering the link we'll use it for now */
+		ieee80211_recalc_chanctx_min_def(local, new_ctx, link);
+
 		ret = drv_assign_vif_chanctx(local, sdata, link->conf, new_ctx);
 		if (ret)
 			goto out;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #119 lore raw

PATCH 119/225 wifi: iwlwifi: mvm: Add locking to the rate read flow

From: Ariel Malamud <[email protected]>

[ Upstream commit a8938bc881d2a03f9b77f19fae924fe798a01285 ]

The rs_drv_get_rate flow reads the lq_sta to return the optimal rate for tx frames. This read flow is not protected thereby leaving a small window, a few instructions wide, open to contention by an asynchronous rate update. Indeed this race condition was hit and the update occurred in the middle of the read.

Fix this by locking the lq_sta struct during read.

Signed-off-by Ariel Malamud <[email protected]>

Link https://lore.kernel.org/r/20230514120631.b52c9ed5c379.I15290b78e0d966c1b68278263776ca9de841d5fe@changeid open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c | 3 +++
 1 file changed, 3 insertions(+)

drivers/net/wireless/intel/iwlwifi/mvm/rs.c +3 -0

index 0b50b816684a0..2be6801d48aca 100644
@@ -2692,6 +2692,8 @@ static void rs_drv_get_rate(void *mvm_r, struct ieee80211_sta *sta,
 		return;
 
 	lq_sta = mvm_sta;
+
+	spin_lock(&lq_sta->pers.lock);
 	iwl_mvm_hwrate_to_tx_rate_v1(lq_sta->last_rate_n_flags,
 				     info->band, &info->control.rates[0]);
 	info->control.rates[0].count = 1;

@@ -2706,6 +2708,7 @@ static void rs_drv_get_rate(void *mvm_r, struct ieee80211_sta *sta,
 		iwl_mvm_hwrate_to_tx_rate_v1(last_ucode_rate, info->band,
 					     &txrc->reported_rate);
 	}
+	spin_unlock(&lq_sta->pers.lock);
 }
 
 static void *rs_drv_alloc_sta(void *mvm_rate, struct ieee80211_sta *sta,

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:43 UTC #120 lore raw

PATCH 120/225 scsi: core: Decrease scsi_devices iorequest_cnt if dispatch failed

From: Wenchao Hao <[email protected]>

[ Upstream commit 09e797c8641f6ad435c33ae24c223351197ea29a ]

If scsi_dispatch_cmd() failed, the SCSI command was not sent to the target, scsi_queue_rq() would return BLK_STS_RESOURCE and the related request would be requeued. The timeout of this request would not fire, no one would increase iodone_cnt.

The above flow would result the iodone_cnt smaller than iorequest_cnt. So decrease the iorequest_cnt if dispatch failed to workaround the issue.

Signed-off-by Wenchao Hao <[email protected]>

Reported-by Ming Lei <[email protected]>

Closes https://lore.kernel.org/r/[email protected] open here

Link https://lore.kernel.org/r/[email protected] open here

Reviewed-by Ming Lei <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/scsi_lib.c | 2 ++
 1 file changed, 2 insertions(+)

drivers/scsi/scsi_lib.c +2 -0

index 8b89fab7c4206..fb6e9a7a7f58b 100644
@@ -1491,6 +1491,7 @@ static int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
 		 */
 		SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
 			"queuecommand : device blocked\n"));
+		atomic_dec(&cmd->device->iorequest_cnt);
 		return SCSI_MLQUEUE_DEVICE_BUSY;
 	}

@@ -1523,6 +1524,7 @@ static int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
 	trace_scsi_dispatch_cmd_start(cmd);
 	rtn = host->hostt->queuecommand(host, cmd);
 	if (rtn) {
+		atomic_dec(&cmd->device->iorequest_cnt);
 		trace_scsi_dispatch_cmd_error(cmd, rtn);
 		if (rtn != SCSI_MLQUEUE_DEVICE_BUSY &&
 		    rtn != SCSI_MLQUEUE_TARGET_BUSY)

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:43 UTC #121 lore raw

PATCH 121/225 wifi: b43: fix incorrect __packed annotation

From: Arnd Bergmann <[email protected]>

[ Upstream commit 212457ccbd60dba34f965e4ffbe62f0e4f970538 ]

clang warns about an unpacked structure inside of a packed one:

drivers/net/wireless/broadcom/b43/b43.h:654:4: error: field data within 'struct b43_iv' is less aligned than 'union (unnamed union at /home/arnd/arm-soc/drivers/net/wireless/broadcom/b43/b43.h:651:2)' and is usually due to 'struct b43_iv' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]

The problem here is that the anonymous union has the default alignment from its members, apparently because the original author mixed up the placement of the __packed attribute by placing it next to the struct member rather than the union definition. As the struct itself is also marked as __packed, there is no need to mark its members, so just move the annotation to the inner type instead.

As Michael noted, the same problem is present in b43legacy, so change both at the same time.

Acked-by Michael Büsch <[email protected]>

Link https://lore.kernel.org/oe-kbuild-all/[email protected]/ open here

Tested-by Larry Finger <[email protected]>

Signed-off-by Kalle Valo <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/wireless/broadcom/b43/b43.h             | 2 +-
 drivers/net/wireless/broadcom/b43legacy/b43legacy.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

drivers/net/wireless/broadcom/b43/b43.h +1 -1

index 9fc7c088a539e..67b4bac048e58 100644
@@ -651,7 +651,7 @@ struct b43_iv {
 	union {
 		__be16 d16;
 		__be32 d32;
-	} data __packed;
+	} __packed data;
 } __packed;

drivers/net/wireless/broadcom/b43legacy/b43legacy.h +1 -1

index 6b0cec467938f..f49365d14619f 100644
@@ -379,7 +379,7 @@ struct b43legacy_iv {
 	union {
 		__be16 d16;
 		__be32 d32;
-	} data __packed;
+	} __packed data;
 } __packed;
 
 #define B43legacy_PHYMODE(phytype)	(1 << (phytype))

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:43 UTC #122 lore raw

PATCH 122/225 net: wwan: t7xx: Ensure init is completed before system sleep

From: Kai-Heng Feng <[email protected]>

[ Upstream commit ab87603b251134441a67385ecc9d3371be17b7a7 ]

When the system attempts to sleep while mtk_t7xx is not ready, the driver cannot put the device to sleep:

[   12.472918] mtk_t7xx 0000:57:00.0: [PM] Exiting suspend, modem in invalid state
[   12.472936] mtk_t7xx 0000:57:00.0: PM: pci_pm_suspend(): t7xx_pci_pm_suspend+0x0/0x20 [mtk_t7xx] returns -14
[   12.473678] mtk_t7xx 0000:57:00.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x1b0 returns -14
[   12.473711] mtk_t7xx 0000:57:00.0: PM: failed to suspend async: error -14
[   12.764776] PM: Some devices failed to suspend, or early wake event detected

Mediatek confirmed the device can take a rather long time to complete its initialization, so wait for up to 20 seconds until init is done.

Signed-off-by Kai-Heng Feng <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/wwan/t7xx/t7xx_pci.c | 18 ++++++++++++++++++
 drivers/net/wwan/t7xx/t7xx_pci.h |  1 +
 2 files changed, 19 insertions(+)

drivers/net/wwan/t7xx/t7xx_pci.c +18 -0

index 226fc1703e90f..91256e005b846 100644
@@ -45,6 +45,7 @@
 #define T7XX_PCI_IREG_BASE		0
 #define T7XX_PCI_EREG_BASE		2
 
+#define T7XX_INIT_TIMEOUT		20
 #define PM_SLEEP_DIS_TIMEOUT_MS		20
 #define PM_ACK_TIMEOUT_MS		1500
 #define PM_AUTOSUSPEND_MS		20000

@@ -96,6 +97,7 @@ static int t7xx_pci_pm_init(struct t7xx_pci_dev *t7xx_dev)
 	spin_lock_init(&t7xx_dev->md_pm_lock);
 	init_completion(&t7xx_dev->sleep_lock_acquire);
 	init_completion(&t7xx_dev->pm_sr_ack);
+	init_completion(&t7xx_dev->init_done);
 	atomic_set(&t7xx_dev->md_pm_state, MTK_PM_INIT);
 
 	device_init_wakeup(&pdev->dev, true);

@@ -124,6 +126,7 @@ void t7xx_pci_pm_init_late(struct t7xx_pci_dev *t7xx_dev)
 	pm_runtime_mark_last_busy(&t7xx_dev->pdev->dev);
 	pm_runtime_allow(&t7xx_dev->pdev->dev);
 	pm_runtime_put_noidle(&t7xx_dev->pdev->dev);
+	complete_all(&t7xx_dev->init_done);
 }
 
 static int t7xx_pci_pm_reinit(struct t7xx_pci_dev *t7xx_dev)

@@ -529,6 +532,20 @@ static void t7xx_pci_shutdown(struct pci_dev *pdev)
 	__t7xx_pci_pm_suspend(pdev);
 }
 
+static int t7xx_pci_pm_prepare(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct t7xx_pci_dev *t7xx_dev;
+
+	t7xx_dev = pci_get_drvdata(pdev);
+	if (!wait_for_completion_timeout(&t7xx_dev->init_done, T7XX_INIT_TIMEOUT * HZ)) {
+		dev_warn(dev, "Not ready for system sleep.\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
 static int t7xx_pci_pm_suspend(struct device *dev)
 {
 	return __t7xx_pci_pm_suspend(to_pci_dev(dev));

@@ -555,6 +572,7 @@ static int t7xx_pci_pm_runtime_resume(struct device *dev)
 }
 
 static const struct dev_pm_ops t7xx_pci_pm_ops = {
+	.prepare = t7xx_pci_pm_prepare,
 	.suspend = t7xx_pci_pm_suspend,
 	.resume = t7xx_pci_pm_resume,
 	.resume_noirq = t7xx_pci_pm_resume_noirq,

drivers/net/wwan/t7xx/t7xx_pci.h +1 -0

index 50b37056ce5a4..5dffe24ef37b4 100644
@@ -69,6 +69,7 @@ struct t7xx_pci_dev {
 	struct t7xx_modem	*md;
 	struct t7xx_ccmni_ctrl	*ccmni_ctlb;
 	bool			rgu_pci_irq_en;
+	struct completion	init_done;
 
 	/* Low Power Items */
 	struct list_head	md_pm_entities;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:43 UTC #123 lore raw

PATCH 123/225 netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT

From: Tom Rix <[email protected]>

[ Upstream commit 224a876e37543eee111bf9b6aa4935080e619335 ]

gcc with W=1 and ! CONFIG_NF_NAT net/netfilter/nf_conntrack_netlink.c:3463:32: error:
‘exp_nat_nla_policy’ defined but not used [-Werror=unused-const-variable=]

 3463 | static const struct nla_policy exp_nat_nla_policy[CTA_EXPECT_NAT_MAX+1] = {
      |                                ^~~~~~~~~~~~~~~~~~

net/netfilter/nf_conntrack_netlink.c:2979:33: error:
‘any_addr’ defined but not used [-Werror=unused-const-variable=]
2979 | static const union nf_inet_addr any_addr;
| ^~~~~~~~

These variables use is controlled by CONFIG_NF_NAT, so should their definitions.

Signed-off-by Tom Rix <[email protected]>

Signed-off-by Florian Westphal <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/netfilter/nf_conntrack_netlink.c | 4 ++++
 1 file changed, 4 insertions(+)

net/netfilter/nf_conntrack_netlink.c +4 -0

index 857cddd9d82e5..9ee8abd3e4b10 100644
@@ -2976,7 +2976,9 @@ static int ctnetlink_exp_dump_mask(struct sk_buff *skb,
 	return -1;
 }
 
+#if IS_ENABLED(CONFIG_NF_NAT)
 static const union nf_inet_addr any_addr;
+#endif
 
 static __be32 nf_expect_get_id(const struct nf_conntrack_expect *exp)
 {

@@ -3460,10 +3462,12 @@ ctnetlink_change_expect(struct nf_conntrack_expect *x,
 	return 0;
 }
 
+#if IS_ENABLED(CONFIG_NF_NAT)
 static const struct nla_policy exp_nat_nla_policy[CTA_EXPECT_NAT_MAX+1] = {
 	[CTA_EXPECT_NAT_DIR]	= { .type = NLA_U32 },
 	[CTA_EXPECT_NAT_TUPLE]	= { .type = NLA_NESTED },
 };
+#endif
 
 static int
 ctnetlink_parse_expect_nat(const struct nlattr *attr,

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:43 UTC #124 lore raw

PATCH 124/225 nvme-multipath: dont call blk_mark_disk_dead in nvme_mpath_remove_disk

From: Christoph Hellwig <[email protected]>

[ Upstream commit 1743e5f6000901a11f4e1cd741bfa9136f3ec9b1 ]

nvme_mpath_remove_disk is called after del_gendisk, at which point a blk_mark_disk_dead call doesn't make any sense.

Signed-off-by Christoph Hellwig <[email protected]>

Reviewed-by Sagi Grimberg <[email protected]>

Signed-off-by Keith Busch <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/nvme/host/multipath.c | 1 -
 1 file changed, 1 deletion(-)

drivers/nvme/host/multipath.c +0 -1

index d09ed00701743..f96d330d39641 100644
@@ -858,7 +858,6 @@ void nvme_mpath_remove_disk(struct nvme_ns_head *head)
 {
 	if (!head->disk)
 		return;
-	blk_mark_disk_dead(head->disk);
 	/* make sure all pending bios are cleaned up */
 	kblockd_schedule_work(&head->requeue_work);
 	flush_work(&head->requeue_work);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:43 UTC #125 lore raw

PATCH 125/225 nvme: do not let the user delete a ctrl before a complete initialization

From: Maurizio Lombardi <[email protected]>

[ Upstream commit 2eb94dd56a4a4e3fe286def3e2ba207804a37345 ]

If a userspace application performes a "delete_controller" command early during the ctrl initialization, the delete operation may race against the init code and the kernel will crash.

nvme nvme5: Connect command failed: host path error nvme nvme5: failed to connect queue: 0 ret=880
PF: supervisor write access in kernel mode
PF: error_code(0x0002) - not-present page

 blk_mq_quiesce_queue+0x18/0x90
 nvme_tcp_delete_ctrl+0x24/0x40 [nvme_tcp]
 nvme_do_delete_ctrl+0x7f/0x8b [nvme_core]
 nvme_sysfs_delete.cold+0x8/0xd [nvme_core]
 kernfs_fop_write_iter+0x124/0x1b0
 new_sync_write+0xff/0x190
 vfs_write+0x1ef/0x280

Fix the crash by checking the NVME_CTRL_STARTED_ONCE bit; if it's not set it means that the nvme controller is still in the process of getting initialized and the kernel will return an -EBUSY error to userspace.
Set the NVME_CTRL_STARTED_ONCE later in the nvme_start_ctrl() function, after the controller start operation is completed.

Signed-off-by Maurizio Lombardi <[email protected]>

Reviewed-by Sagi Grimberg <[email protected]>

Signed-off-by Keith Busch <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/nvme/host/core.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

drivers/nvme/host/core.c +5 -1

index f502e032e7e46..2e22c78991ccf 100644
@@ -3540,6 +3540,9 @@ static ssize_t nvme_sysfs_delete(struct device *dev,
 {
 	struct nvme_ctrl *ctrl = dev_get_drvdata(dev);
 
+	if (!test_bit(NVME_CTRL_STARTED_ONCE, &ctrl->flags))
+		return -EBUSY;
+
 	if (device_remove_file_self(dev, attr))
 		nvme_delete_ctrl_sync(ctrl);
 	return count;

@@ -4980,7 +4983,7 @@ void nvme_start_ctrl(struct nvme_ctrl *ctrl)
 	 * that were missed. We identify persistent discovery controllers by
 	 * checking that they started once before, hence are reconnecting back.
 	 */
-	if (test_and_set_bit(NVME_CTRL_STARTED_ONCE, &ctrl->flags) &&
+	if (test_bit(NVME_CTRL_STARTED_ONCE, &ctrl->flags) &&
 	    nvme_discovery_ctrl(ctrl))
 		nvme_change_uevent(ctrl, "NVME_EVENT=rediscover");

@@ -4991,6 +4994,7 @@ void nvme_start_ctrl(struct nvme_ctrl *ctrl)
 	}
 
 	nvme_change_uevent(ctrl, "NVME_EVENT=connected");
+	set_bit(NVME_CTRL_STARTED_ONCE, &ctrl->flags);
 }
 EXPORT_SYMBOL_GPL(nvme_start_ctrl);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:43 UTC #126 lore raw

PATCH 126/225 ALSA: oss: avoid missing-prototype warnings

From: Arnd Bergmann <[email protected]>

[ Upstream commit 040b5a046a9e18098580d3ccd029e2318fca7859 ]

Two functions are defined and used in pcm_oss.c but also optionally used from io.c, with an optional prototype. If CONFIG_SND_PCM_OSS_PLUGINS is disabled, this causes a warning as the functions are not static and have no prototype:

sound/core/oss/pcm_oss.c:1235:19: error: no previous prototype for 'snd_pcm_oss_write3' [-Werror=missing-prototypes] sound/core/oss/pcm_oss.c:1266:19: error: no previous prototype for 'snd_pcm_oss_read3' [-Werror=missing-prototypes]

Avoid this by making the prototypes unconditional.

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 sound/core/oss/pcm_plugin.h | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

sound/core/oss/pcm_plugin.h +8 -8

index 46e273bd4a786..50a6b50f5db4c 100644
@@ -141,6 +141,14 @@ int snd_pcm_area_copy(const struct snd_pcm_channel_area *src_channel,
 
 void *snd_pcm_plug_buf_alloc(struct snd_pcm_substream *plug, snd_pcm_uframes_t size);
 void snd_pcm_plug_buf_unlock(struct snd_pcm_substream *plug, void *ptr);
+#else
+
+static inline snd_pcm_sframes_t snd_pcm_plug_client_size(struct snd_pcm_substream *handle, snd_pcm_uframes_t drv_size) { return drv_size; }
+static inline snd_pcm_sframes_t snd_pcm_plug_slave_size(struct snd_pcm_substream *handle, snd_pcm_uframes_t clt_size) { return clt_size; }
+static inline int snd_pcm_plug_slave_format(int format, const struct snd_mask *format_mask) { return format; }
+
+#endif
+
 snd_pcm_sframes_t snd_pcm_oss_write3(struct snd_pcm_substream *substream,
 				     const char *ptr, snd_pcm_uframes_t size,
 				     int in_kernel);

@@ -151,14 +159,6 @@ snd_pcm_sframes_t snd_pcm_oss_writev3(struct snd_pcm_substream *substream,
 snd_pcm_sframes_t snd_pcm_oss_readv3(struct snd_pcm_substream *substream,
 				     void **bufs, snd_pcm_uframes_t frames);
 
-#else
-
-static inline snd_pcm_sframes_t snd_pcm_plug_client_size(struct snd_pcm_substream *handle, snd_pcm_uframes_t drv_size) { return drv_size; }
-static inline snd_pcm_sframes_t snd_pcm_plug_slave_size(struct snd_pcm_substream *handle, snd_pcm_uframes_t clt_size) { return clt_size; }
-static inline int snd_pcm_plug_slave_format(int format, const struct snd_mask *format_mask) { return format; }
-
-#endif
-
 #ifdef PLUGIN_DEBUG
 #define pdprintf(fmt, args...) printk(KERN_DEBUG "plugin: " fmt, ##args)
 #else

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #127 lore raw

PATCH 127/225 drm/msm: Be more shouty if per-process pgtables arent working

From: Rob Clark <[email protected]>

[ Upstream commit 5c054db54c43a5fcb5cc81012361f5e3fac37637 ]

Otherwise it is not always obvious if a dt or iommu change is causing us to fall back to global pgtable.

Signed-off-by Rob Clark <[email protected]>

Reviewed-by Dmitry Baryshkov <[email protected]>

Patchwork: https://patchwork.freedesktop.org/patch/537359/

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/gpu/drm/msm/msm_iommu.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

drivers/gpu/drm/msm/msm_iommu.c +6 -1

index 5577cea7c0092..d12ba47b37c4f 100644
@@ -227,7 +227,12 @@ struct msm_mmu *msm_iommu_pagetable_create(struct msm_mmu *parent)
 	/* Get the pagetable configuration from the domain */
 	if (adreno_smmu->cookie)
 		ttbr1_cfg = adreno_smmu->get_ttbr1_cfg(adreno_smmu->cookie);
-	if (!ttbr1_cfg)
+
+	/*
+	 * If you hit this WARN_ONCE() you are probably missing an entry in
+	 * qcom_smmu_impl_of_match[] in arm-smmu-qcom.c
+	 */
+	if (WARN_ONCE(!ttbr1_cfg, "No per-process page tables"))
 		return ERR_PTR(-ENODEV);
 
 	/*

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #128 lore raw

PATCH 128/225 atm: hide unused procfs functions

From: Arnd Bergmann <[email protected]>

[ Upstream commit fb1b7be9b16c1f4626969ba4e95a97da2a452b41 ]

When CONFIG_PROC_FS is disabled, the function declarations for some procfs functions are hidden, but the definitions are still build, as shown by this compiler warning:

net/atm/resources.c:403:7: error: no previous prototype for 'atm_dev_seq_start' [-Werror=missing-prototypes] net/atm/resources.c:409:6: error: no previous prototype for 'atm_dev_seq_stop' [-Werror=missing-prototypes] net/atm/resources.c:414:7: error: no previous prototype for 'atm_dev_seq_next' [-Werror=missing-prototypes]

Add another #ifdef to leave these out of the build.

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 net/atm/resources.c | 2 ++
 1 file changed, 2 insertions(+)

net/atm/resources.c +2 -0

index 2b2d33eeaf200..995d29e7fb138 100644
@@ -400,6 +400,7 @@ int atm_dev_ioctl(unsigned int cmd, void __user *buf, int __user *sioc_len,
 	return error;
 }
 
+#ifdef CONFIG_PROC_FS
 void *atm_dev_seq_start(struct seq_file *seq, loff_t *pos)
 {
 	mutex_lock(&atm_dev_mutex);

@@ -415,3 +416,4 @@ void *atm_dev_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 {
 	return seq_list_next(v, &atm_devs, pos);
 }
+#endif

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #129 lore raw

PATCH 129/225 ceph: silence smatch warning in reconnect_caps_cb()

From: Xiubo Li <[email protected]>

[ Upstream commit 9aaa7eb018661b2da221362d9bacb096bd596f52 ]

Smatch static checker warning:

fs/ceph/mds_client.c:3968 reconnect_caps_cb()
warn: missing error code here? '__get_cap_for_mds()' failed. 'err' = '0'

[ idryomov: Dan says that Smatch considers it intentional only if the
"ret = 0;" assignment is within 4 or 5 lines of the goto. ]

Reported-by Dan Carpenter <[email protected]>

Signed-off-by Xiubo Li <[email protected]>

Reviewed-by Ilya Dryomov <[email protected]>

Signed-off-by Ilya Dryomov <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/ceph/mds_client.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

fs/ceph/mds_client.c +2 -1

index 54e3c2ab21d22..1989c8deea55a 100644
@@ -3938,7 +3938,7 @@ static int reconnect_caps_cb(struct inode *inode, int mds, void *arg)
 	struct dentry *dentry;
 	struct ceph_cap *cap;
 	char *path;
-	int pathlen = 0, err = 0;
+	int pathlen = 0, err;
 	u64 pathbase;
 	u64 snap_follows;

@@ -3961,6 +3961,7 @@ static int reconnect_caps_cb(struct inode *inode, int mds, void *arg)
 	cap = __get_cap_for_mds(ci, mds);
 	if (!cap) {
 		spin_unlock(&ci->i_ceph_lock);
+		err = 0;
 		goto out_err;
 	}
 	dout(" adding %p ino %llx.%llx cap %p %lld %s\n",

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #130 lore raw

PATCH 130/225 drm/amdgpu: skip disabling fence driver src_irqs when device is unplugged

From: Guchun Chen <[email protected]>

[ Upstream commit c1a322a7a4a96cd0a3dde32ce37af437a78bf8cd ]

When performing device unbind or halt, we have disabled all irqs at the very begining like amdgpu_pci_remove or amdgpu_device_halt. So amdgpu_irq_put for irqs stored in fence driver should not be called any more, otherwise, below calltrace will arrive.

[  139.114088] WARNING: CPU: 2 PID: 1550 at drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c:616 amdgpu_irq_put+0xf6/0x110 [amdgpu]
[  139.114655] Call Trace:
[  139.114655]  <TASK>
[  139.114657]  amdgpu_fence_driver_hw_fini+0x93/0x130 [amdgpu]
[  139.114836]  amdgpu_device_fini_hw+0xb6/0x350 [amdgpu]
[  139.114955]  amdgpu_driver_unload_kms+0x51/0x70 [amdgpu]
[  139.115075]  amdgpu_pci_remove+0x63/0x160 [amdgpu]
[  139.115193]  ? __pm_runtime_resume+0x64/0x90
[  139.115195]  pci_device_remove+0x3a/0xb0
[  139.115197]  device_remove+0x43/0x70
[  139.115198]  device_release_driver_internal+0xbd/0x140

Signed-off-by Guchun Chen <[email protected]>

Acked-by Alex Deucher <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c +2 -1

index 3cc1929285fc0..ed6878d5b3ce3 100644
@@ -528,7 +528,8 @@ void amdgpu_fence_driver_hw_fini(struct amdgpu_device *adev)
 		if (r)
 			amdgpu_fence_driver_force_completion(ring);
 
-		if (ring->fence_drv.irq_src)
+		if (!drm_dev_is_unplugged(adev_to_drm(adev)) &&
+		    ring->fence_drv.irq_src)
 			amdgpu_irq_put(adev, ring->fence_drv.irq_src,
 				       ring->fence_drv.irq_type);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #131 lore raw

PATCH 131/225 ublk: fix AB-BA lockdep warning

Closes https://lore.kernel.org/linux-block/becol2g7sawl4rsjq2dztsbc7mqypfqko6wzsyoyazqydoasml@rcxarzwidrhk open here

From: Ming Lei <[email protected]>

[ Upstream commit ac5902f84bb546c64aea02c439c2579cbf40318f ]

When handling UBLK_IO_FETCH_REQ, ctx->uring_lock is grabbed first, then ub->mutex is acquired.

When handling UBLK_CMD_STOP_DEV or UBLK_CMD_DEL_DEV, ub->mutex is grabbed first, then calling io_uring_cmd_done() for canceling uring command, in which ctx->uring_lock may be required.

Real deadlock only happens when all the above commands are issued from same uring context, and in reality different uring contexts are often used for handing control command and IO command.

Fix the issue by using io_uring_cmd_complete_in_task() to cancel command in ublk_cancel_dev(ublk_cancel_queue).

Reported-by Shinichiro Kawasaki <[email protected]>

Cc Ziyang Zhang <[email protected]>

Signed-off-by Ming Lei <[email protected]>

Tested-by Shinichiro Kawasaki <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Jens Axboe <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/block/ublk_drv.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

drivers/block/ublk_drv.c +7 -2

index c0cbc5f3eb266..c56d1c6d8e58d 100644
@@ -1045,6 +1045,11 @@ static inline bool ublk_queue_ready(struct ublk_queue *ubq)
 	return ubq->nr_io_ready == ubq->q_depth;
 }
 
+static void ublk_cmd_cancel_cb(struct io_uring_cmd *cmd, unsigned issue_flags)
+{
+	io_uring_cmd_done(cmd, UBLK_IO_RES_ABORT, 0, issue_flags);
+}
+
 static void ublk_cancel_queue(struct ublk_queue *ubq)
 {
 	int i;

@@ -1056,8 +1061,8 @@ static void ublk_cancel_queue(struct ublk_queue *ubq)
 		struct ublk_io *io = &ubq->ios[i];
 
 		if (io->flags & UBLK_IO_FLAG_ACTIVE)
-			io_uring_cmd_done(io->cmd, UBLK_IO_RES_ABORT, 0,
-						IO_URING_F_UNLOCKED);
+			io_uring_cmd_complete_in_task(io->cmd,
+						      ublk_cmd_cancel_cb);
 	}
 
 	/* all io commands are canceled */

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #132 lore raw

PATCH 132/225 nvme-pci: Add quirk for Teamgroup MP33 SSD

From: Daniel Smith <[email protected]>

[ Upstream commit 0649728123cf6a5518e154b4e1735fc85ea4f55c ]

Add a quirk for Teamgroup MP33 that reports duplicate ids for disk.

Signed-off-by Daniel Smith <[email protected]>

[kch: patch formatting]

Signed-off-by Chaitanya Kulkarni <[email protected]>

Tested-by Daniel Smith <[email protected]>

Signed-off-by Keith Busch <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/nvme/host/pci.c | 2 ++
 1 file changed, 2 insertions(+)

drivers/nvme/host/pci.c +2 -0

index 1ec0ca40604aa..ba4903c86f7ff 100644
@@ -3558,6 +3558,8 @@ static const struct pci_device_id nvme_id_table[] = {
 		.driver_data = NVME_QUIRK_BOGUS_NID, },
 	{ PCI_DEVICE(0x1e4b, 0x1602), /* HS-SSD-FUTURE 2048G  */
 		.driver_data = NVME_QUIRK_BOGUS_NID, },
+	{ PCI_DEVICE(0x10ec, 0x5765), /* TEAMGROUP MP33 2TB SSD */
+		.driver_data = NVME_QUIRK_BOGUS_NID, },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMAZON, 0x0061),
 		.driver_data = NVME_QUIRK_DMA_ADDRESS_BITS_48, },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMAZON, 0x0065),

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #133 lore raw

PATCH 133/225 block: Deny writable memory mapping if block is read-only

From: Loic Poulain <[email protected]>

[ Upstream commit 69baa3a623fd2e58624f24f2f23d46f87b817c93 ]

User should not be able to write block device if it is read-only at block level (e.g force_ro attribute). This is ensured in the regular fops write operation (blkdev_write_iter) but not when writing via user mapping (mmap), allowing user to actually write a read-only block device via a PROT_WRITE mapping.

Example: This can lead to integrity issue of eMMC boot partition (e.g mmcblk0boot0) which is read-only by default.

To fix this issue, simply deny shared writable mapping if the block is readonly.

Note: Block remains writable if switch to read-only is performed after the initial mapping, but this is expected behavior according to commit a32e236eb93e ("Partially revert "block: fail op_is_write() requests to read-only partitions"")'.

Signed-off-by Loic Poulain <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Jens Axboe <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 block/fops.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

block/fops.c +11 -1

index e406aa605327e..6197d1c41652d 100644
@@ -685,6 +685,16 @@ static long blkdev_fallocate(struct file *file, int mode, loff_t start,
 	return error;
 }
 
+static int blkdev_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct inode *bd_inode = bdev_file_inode(file);
+
+	if (bdev_read_only(I_BDEV(bd_inode)))
+		return generic_file_readonly_mmap(file, vma);
+
+	return generic_file_mmap(file, vma);
+}
+
 const struct file_operations def_blk_fops = {
 	.open		= blkdev_open,
 	.release	= blkdev_close,

@@ -692,7 +702,7 @@ const struct file_operations def_blk_fops = {
 	.read_iter	= blkdev_read_iter,
 	.write_iter	= blkdev_write_iter,
 	.iopoll		= iocb_bio_iopoll,
-	.mmap		= generic_file_mmap,
+	.mmap		= blkdev_mmap,
 	.fsync		= blkdev_fsync,
 	.unlocked_ioctl	= blkdev_ioctl,
 #ifdef CONFIG_COMPAT

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #134 lore raw

PATCH 134/225 KVM: arm64: vgic: Fix a circular locking issue

From: Jean-Philippe Brucker <[email protected]>

[ Upstream commit 59112e9c390be595224e427827475a6cd3726021 ]

Lockdep reports a circular lock dependency between the srcu and the config_lock:

[  262.179917] -> #1 (&kvm->srcu){.+.+}-{0:0}:
[  262.182010]        __synchronize_srcu+0xb0/0x224
[  262.183422]        synchronize_srcu_expedited+0x24/0x34
[  262.184554]        kvm_io_bus_register_dev+0x324/0x50c
[  262.185650]        vgic_register_redist_iodev+0x254/0x398
[  262.186740]        vgic_v3_set_redist_base+0x3b0/0x724
[  262.188087]        kvm_vgic_addr+0x364/0x600
[  262.189189]        vgic_set_common_attr+0x90/0x544
[  262.190278]        vgic_v3_set_attr+0x74/0x9c
[  262.191432]        kvm_device_ioctl+0x2a0/0x4e4
[  262.192515]        __arm64_sys_ioctl+0x7ac/0x1ba8
[  262.193612]        invoke_syscall.constprop.0+0x70/0x1e0
[  262.195006]        do_el0_svc+0xe4/0x2d4
[  262.195929]        el0_svc+0x44/0x8c
[  262.196917]        el0t_64_sync_handler+0xf4/0x120
[  262.198238]        el0t_64_sync+0x190/0x194
[  262.199224]
[  262.199224] -> #0 (&kvm->arch.config_lock){+.+.}-{3:3}:
[  262.201094]        __lock_acquire+0x2b70/0x626c
[  262.202245]        lock_acquire+0x454/0x778
[  262.203132]        __mutex_lock+0x190/0x8b4
[  262.204023]        mutex_lock_nested+0x24/0x30
[  262.205100]        vgic_mmio_write_v3_misc+0x5c/0x2a0
[  262.206178]        dispatch_mmio_write+0xd8/0x258
[  262.207498]        __kvm_io_bus_write+0x1e0/0x350
[  262.208582]        kvm_io_bus_write+0xe0/0x1cc
[  262.209653]        io_mem_abort+0x2ac/0x6d8
[  262.210569]        kvm_handle_guest_abort+0x9b8/0x1f88
[  262.211937]        handle_exit+0xc4/0x39c
[  262.212971]        kvm_arch_vcpu_ioctl_run+0x90c/0x1c04
[  262.214154]        kvm_vcpu_ioctl+0x450/0x12f8
[  262.215233]        __arm64_sys_ioctl+0x7ac/0x1ba8
[  262.216402]        invoke_syscall.constprop.0+0x70/0x1e0
[  262.217774]        do_el0_svc+0xe4/0x2d4
[  262.218758]        el0_svc+0x44/0x8c
[  262.219941]        el0t_64_sync_handler+0xf4/0x120
[  262.221110]        el0t_64_sync+0x190/0x194

Note that the current report, which can be triggered by the vgic_irq kselftest, is a triple chain that includes slots_lock, but after inverting the slots_lock/config_lock dependency, the actual problem reported above remains.

In several places, the vgic code calls kvm_io_bus_register_dev(), which synchronizes the srcu, while holding config_lock (#1). And the MMIO handler takes the config_lock while holding the srcu read lock (#0).

Break dependency #1, by registering the distributor and redistributors without holding config_lock. The ITS also uses kvm_io_bus_register_dev() but already relies on slots_lock to serialize calls.

The distributor iodev is created on the first KVM_RUN call. Multiple threads will race for vgic initialization, and only the first one will see !vgic_ready() under the lock. To serialize those threads, rely on slots_lock rather than config_lock.

Redistributors are created earlier, through KVM_DEV_ARM_VGIC_GRP_ADDR ioctls and vCPU creation. Similarly, serialize the iodev creation with slots_lock, and the rest with config_lock.

Fixes f00327731131 ("KVM: arm64: Use config_lock to protect vgic state")

Signed-off-by Jean-Philippe Brucker <[email protected]>

Reviewed-by Oliver Upton <[email protected]>

Signed-off-by Marc Zyngier <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 arch/arm64/kvm/vgic/vgic-init.c       | 25 ++++++++++++++++-----
 arch/arm64/kvm/vgic/vgic-kvm-device.c | 10 +++++++--
 arch/arm64/kvm/vgic/vgic-mmio-v3.c    | 31 ++++++++++++++++++---------
 arch/arm64/kvm/vgic/vgic-mmio.c       |  9 ++------
 arch/arm64/kvm/vgic/vgic-v2.c         |  6 ------
 arch/arm64/kvm/vgic/vgic-v3.c         |  7 ------
 6 files changed, 51 insertions(+), 37 deletions(-)

arch/arm64/kvm/vgic/vgic-init.c +20 -5

index 8c1d2d7128db6..37e74ca4dad85 100644
@@ -235,9 +235,9 @@ int kvm_vgic_vcpu_init(struct kvm_vcpu *vcpu)
 	 * KVM io device for the redistributor that belongs to this VCPU.
 	 */
 	if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3) {
-		mutex_lock(&vcpu->kvm->arch.config_lock);
+		mutex_lock(&vcpu->kvm->slots_lock);
 		ret = vgic_register_redist_iodev(vcpu);
-		mutex_unlock(&vcpu->kvm->arch.config_lock);
+		mutex_unlock(&vcpu->kvm->slots_lock);
 	}
 	return ret;
 }

@@ -446,11 +446,13 @@ int vgic_lazy_init(struct kvm *kvm)
 int kvm_vgic_map_resources(struct kvm *kvm)
 {
 	struct vgic_dist *dist = &kvm->arch.vgic;
+	gpa_t dist_base;
 	int ret = 0;
 
 	if (likely(vgic_ready(kvm)))
 		return 0;
 
+	mutex_lock(&kvm->slots_lock);
 	mutex_lock(&kvm->arch.config_lock);
 	if (vgic_ready(kvm))
 		goto out;

@@ -463,13 +465,26 @@ int kvm_vgic_map_resources(struct kvm *kvm)
 	else
 		ret = vgic_v3_map_resources(kvm);
 
-	if (ret)
+	if (ret) {
 		__kvm_vgic_destroy(kvm);
-	else
-		dist->ready = true;
+		goto out;
+	}
+	dist->ready = true;
+	dist_base = dist->vgic_dist_base;
+	mutex_unlock(&kvm->arch.config_lock);
+
+	ret = vgic_register_dist_iodev(kvm, dist_base,
+				       kvm_vgic_global_state.type);
+	if (ret) {
+		kvm_err("Unable to register VGIC dist MMIO regions\n");
+		kvm_vgic_destroy(kvm);
+	}
+	mutex_unlock(&kvm->slots_lock);
+	return ret;
 
 out:
 	mutex_unlock(&kvm->arch.config_lock);
+	mutex_unlock(&kvm->slots_lock);
 	return ret;
 }

arch/arm64/kvm/vgic/vgic-kvm-device.c +8 -2

index 07e727023deb7..bf4b3d9631ce1 100644
@@ -102,7 +102,11 @@ static int kvm_vgic_addr(struct kvm *kvm, struct kvm_device_attr *attr, bool wri
 		if (get_user(addr, uaddr))
 			return -EFAULT;
 
-	mutex_lock(&kvm->arch.config_lock);
+	/*
+	 * Since we can't hold config_lock while registering the redistributor
+	 * iodevs, take the slots_lock immediately.
+	 */
+	mutex_lock(&kvm->slots_lock);
 	switch (attr->attr) {
 	case KVM_VGIC_V2_ADDR_TYPE_DIST:
 		r = vgic_check_type(kvm, KVM_DEV_TYPE_ARM_VGIC_V2);

@@ -182,6 +186,7 @@ static int kvm_vgic_addr(struct kvm *kvm, struct kvm_device_attr *attr, bool wri
 	if (r)
 		goto out;
 
+	mutex_lock(&kvm->arch.config_lock);
 	if (write) {
 		r = vgic_check_iorange(kvm, *addr_ptr, addr, alignment, size);
 		if (!r)

@@ -189,9 +194,10 @@ static int kvm_vgic_addr(struct kvm *kvm, struct kvm_device_attr *attr, bool wri
 	} else {
 		addr = *addr_ptr;
 	}
+	mutex_unlock(&kvm->arch.config_lock);
 
 out:
-	mutex_unlock(&kvm->arch.config_lock);
+	mutex_unlock(&kvm->slots_lock);
 
 	if (!r && !write)
 		r =  put_user(addr, uaddr);

arch/arm64/kvm/vgic/vgic-mmio-v3.c +21 ~~-10~~

index 472b18ac92a24..188d2187eede9 100644
@@ -769,10 +769,13 @@ int vgic_register_redist_iodev(struct kvm_vcpu *vcpu)
 	struct vgic_io_device *rd_dev = &vcpu->arch.vgic_cpu.rd_iodev;
 	struct vgic_redist_region *rdreg;
 	gpa_t rd_base;
-	int ret;
+	int ret = 0;
+
+	lockdep_assert_held(&kvm->slots_lock);
+	mutex_lock(&kvm->arch.config_lock);
 
 	if (!IS_VGIC_ADDR_UNDEF(vgic_cpu->rd_iodev.base_addr))
-		return 0;
+		goto out_unlock;
 
 	/*
 	 * We may be creating VCPUs before having set the base address for the

@@ -782,10 +785,12 @@ int vgic_register_redist_iodev(struct kvm_vcpu *vcpu)
 	 */
 	rdreg = vgic_v3_rdist_free_slot(&vgic->rd_regions);
 	if (!rdreg)
-		return 0;
+		goto out_unlock;
 
-	if (!vgic_v3_check_base(kvm))
-		return -EINVAL;
+	if (!vgic_v3_check_base(kvm)) {
+		ret = -EINVAL;
+		goto out_unlock;
+	}
 
 	vgic_cpu->rdreg = rdreg;
 	vgic_cpu->rdreg_index = rdreg->free_index;

@@ -799,16 +804,20 @@ int vgic_register_redist_iodev(struct kvm_vcpu *vcpu)
 	rd_dev->nr_regions = ARRAY_SIZE(vgic_v3_rd_registers);
 	rd_dev->redist_vcpu = vcpu;
 
-	mutex_lock(&kvm->slots_lock);
+	mutex_unlock(&kvm->arch.config_lock);
+
 	ret = kvm_io_bus_register_dev(kvm, KVM_MMIO_BUS, rd_base,
 				      2 * SZ_64K, &rd_dev->dev);
-	mutex_unlock(&kvm->slots_lock);
-
 	if (ret)
 		return ret;
 
+	/* Protected by slots_lock */
 	rdreg->free_index++;
 	return 0;
+
+out_unlock:
+	mutex_unlock(&kvm->arch.config_lock);
+	return ret;
 }
 
 static void vgic_unregister_redist_iodev(struct kvm_vcpu *vcpu)

@@ -834,12 +843,10 @@ static int vgic_register_all_redist_iodevs(struct kvm *kvm)
 		/* The current c failed, so iterate over the previous ones. */
 		int i;
 
-		mutex_lock(&kvm->slots_lock);
 		for (i = 0; i < c; i++) {
 			vcpu = kvm_get_vcpu(kvm, i);
 			vgic_unregister_redist_iodev(vcpu);
 		}
-		mutex_unlock(&kvm->slots_lock);
 	}
 
 	return ret;

@@ -938,7 +945,9 @@ int vgic_v3_set_redist_base(struct kvm *kvm, u32 index, u64 addr, u32 count)
 {
 	int ret;
 
+	mutex_lock(&kvm->arch.config_lock);
 	ret = vgic_v3_alloc_redist_region(kvm, index, addr, count);
+	mutex_unlock(&kvm->arch.config_lock);
 	if (ret)
 		return ret;

@@ -950,8 +959,10 @@ int vgic_v3_set_redist_base(struct kvm *kvm, u32 index, u64 addr, u32 count)
 	if (ret) {
 		struct vgic_redist_region *rdreg;
 
+		mutex_lock(&kvm->arch.config_lock);
 		rdreg = vgic_v3_rdist_region_from_index(kvm, index);
 		vgic_v3_free_redist_region(rdreg);
+		mutex_unlock(&kvm->arch.config_lock);
 		return ret;
 	}

arch/arm64/kvm/vgic/vgic-mmio.c +2 -7

index a95f99b93dd68..eb5c58d785b99 100644
@@ -1093,7 +1093,6 @@ int vgic_register_dist_iodev(struct kvm *kvm, gpa_t dist_base_address,
 			     enum vgic_type type)
 {
 	struct vgic_io_device *io_device = &kvm->arch.vgic.dist_iodev;
-	int ret = 0;
 	unsigned int len;
 
 	switch (type) {

@@ -1111,10 +1110,6 @@ int vgic_register_dist_iodev(struct kvm *kvm, gpa_t dist_base_address,
 	io_device->iodev_type = IODEV_DIST;
 	io_device->redist_vcpu = NULL;
 
-	mutex_lock(&kvm->slots_lock);
-	ret = kvm_io_bus_register_dev(kvm, KVM_MMIO_BUS, dist_base_address,
-				      len, &io_device->dev);
-	mutex_unlock(&kvm->slots_lock);
-
-	return ret;
+	return kvm_io_bus_register_dev(kvm, KVM_MMIO_BUS, dist_base_address,
+				       len, &io_device->dev);
 }

arch/arm64/kvm/vgic/vgic-v2.c +0 -6

index 645648349c99b..7e9cdb78f7ce8 100644
@@ -312,12 +312,6 @@ int vgic_v2_map_resources(struct kvm *kvm)
 		return ret;
 	}
 
-	ret = vgic_register_dist_iodev(kvm, dist->vgic_dist_base, VGIC_V2);
-	if (ret) {
-		kvm_err("Unable to register VGIC MMIO regions\n");
-		return ret;
-	}
-
 	if (!static_branch_unlikely(&vgic_v2_cpuif_trap)) {
 		ret = kvm_phys_addr_ioremap(kvm, dist->vgic_cpu_base,
 					    kvm_vgic_global_state.vcpu_base,

arch/arm64/kvm/vgic/vgic-v3.c +0 -7

index 5bdada3137287..f86c3007a319c 100644
@@ -538,7 +538,6 @@ int vgic_v3_map_resources(struct kvm *kvm)
 {
 	struct vgic_dist *dist = &kvm->arch.vgic;
 	struct kvm_vcpu *vcpu;
-	int ret = 0;
 	unsigned long c;
 
 	kvm_for_each_vcpu(c, vcpu, kvm) {

@@ -568,12 +567,6 @@ int vgic_v3_map_resources(struct kvm *kvm)
 		return -EBUSY;
 	}
 
-	ret = vgic_register_dist_iodev(kvm, dist->vgic_dist_base, VGIC_V3);
-	if (ret) {
-		kvm_err("Unable to register VGICv3 dist MMIO regions\n");
-		return ret;
-	}
-
 	if (kvm_vgic_global_state.has_gicv4_1)
 		vgic_v4_configure_vsgis(kvm);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #135 lore raw

PATCH 135/225 KVM: arm64: vgic: Wrap vgic_its_create() with config_lock

From: Jean-Philippe Brucker <[email protected]>

[ Upstream commit 9cf2f840c439b6b23bd99f584f2917ca425ae406 ]

vgic_its_create() changes the vgic state without holding the config_lock, which triggers a lockdep warning in vgic_v4_init():

[  358.667941] WARNING: CPU: 3 PID: 178 at arch/arm64/kvm/vgic/vgic-v4.c:245 vgic_v4_init+0x15c/0x7a8
...
[  358.707410]  vgic_v4_init+0x15c/0x7a8
[  358.708550]  vgic_its_create+0x37c/0x4a4
[  358.709640]  kvm_vm_ioctl+0x1518/0x2d80
[  358.710688]  __arm64_sys_ioctl+0x7ac/0x1ba8
[  358.711960]  invoke_syscall.constprop.0+0x70/0x1e0
[  358.713245]  do_el0_svc+0xe4/0x2d4
[  358.714289]  el0_svc+0x44/0x8c
[  358.715329]  el0t_64_sync_handler+0xf4/0x120
[  358.716615]  el0t_64_sync+0x190/0x194

Wrap the whole of vgic_its_create() with config_lock since, in addition to calling vgic_v4_init(), it also modifies the global kvm->arch.vgic state.

Fixes f00327731131 ("KVM: arm64: Use config_lock to protect vgic state")

Signed-off-by Jean-Philippe Brucker <[email protected]>

Reviewed-by Oliver Upton <[email protected]>

Signed-off-by Marc Zyngier <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 arch/arm64/kvm/vgic/vgic-its.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

arch/arm64/kvm/vgic/vgic-its.c +10 -4

index c9a03033d5077..00ad6587bee9a 100644
@@ -1936,6 +1936,7 @@ void vgic_lpi_translation_cache_destroy(struct kvm *kvm)
 
 static int vgic_its_create(struct kvm_device *dev, u32 type)
 {
+	int ret;
 	struct vgic_its *its;
 
 	if (type != KVM_DEV_TYPE_ARM_VGIC_ITS)

@@ -1945,9 +1946,12 @@ static int vgic_its_create(struct kvm_device *dev, u32 type)
 	if (!its)
 		return -ENOMEM;
 
+	mutex_lock(&dev->kvm->arch.config_lock);
+
 	if (vgic_initialized(dev->kvm)) {
-		int ret = vgic_v4_init(dev->kvm);
+		ret = vgic_v4_init(dev->kvm);
 		if (ret < 0) {
+			mutex_unlock(&dev->kvm->arch.config_lock);
 			kfree(its);
 			return ret;
 		}

@@ -1960,12 +1964,10 @@ static int vgic_its_create(struct kvm_device *dev, u32 type)
 
 	/* Yep, even more trickery for lock ordering... */
 #ifdef CONFIG_LOCKDEP
-	mutex_lock(&dev->kvm->arch.config_lock);
 	mutex_lock(&its->cmd_lock);
 	mutex_lock(&its->its_lock);
 	mutex_unlock(&its->its_lock);
 	mutex_unlock(&its->cmd_lock);
-	mutex_unlock(&dev->kvm->arch.config_lock);
 #endif
 
 	its->vgic_its_base = VGIC_ADDR_UNDEF;

@@ -1986,7 +1988,11 @@ static int vgic_its_create(struct kvm_device *dev, u32 type)
 
 	dev->private = its;
 
-	return vgic_its_set_abi(its, NR_ITS_ABIS - 1);
+	ret = vgic_its_set_abi(its, NR_ITS_ABIS - 1);
+
+	mutex_unlock(&dev->kvm->arch.config_lock);
+
+	return ret;
 }
 
 static void vgic_its_destroy(struct kvm_device *kvm_dev)

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #136 lore raw

PATCH 136/225 KVM: arm64: vgic: Fix locking comment

From: Jean-Philippe Brucker <[email protected]>

[ Upstream commit c38b8400aef99d63be2b1ff131bb993465dcafe1 ]

It is now config_lock that must be held, not kvm lock. Replace the comment with a lockdep annotation.

Fixes f00327731131 ("KVM: arm64: Use config_lock to protect vgic state")

Signed-off-by Jean-Philippe Brucker <[email protected]>

Reviewed-by Oliver Upton <[email protected]>

Signed-off-by Marc Zyngier <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 arch/arm64/kvm/vgic/vgic-v4.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

arch/arm64/kvm/vgic/vgic-v4.c +2 -1

index 3bb0034780605..c1c28fe680ba3 100644
@@ -184,13 +184,14 @@ static void vgic_v4_disable_vsgis(struct kvm_vcpu *vcpu)
 	}
 }
 
-/* Must be called with the kvm lock held */
 void vgic_v4_configure_vsgis(struct kvm *kvm)
 {
 	struct vgic_dist *dist = &kvm->arch.vgic;
 	struct kvm_vcpu *vcpu;
 	unsigned long i;
 
+	lockdep_assert_held(&kvm->arch.config_lock);
+
 	kvm_arm_halt_guest(kvm);
 
 	kvm_for_each_vcpu(i, vcpu, kvm) {

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #137 lore raw

PATCH 137/225 media: mediatek: vcodec: Only apply 4K frame sizes on decoder formats

From: Pin-yen Lin <[email protected]>

[ Upstream commit ed17f89e9502f03af493e130620a9bb74c07cf28 ]

When VCODEC_CAPABILITY_4K_DISABLED is not set in dec_capability, skip formats that are not MTK_FMT_DEC so only decoder formats is updated in mtk_init_vdec_params.

Fixes e25528e1dbe5 ("media: mediatek: vcodec: Use 4K frame size when supported by stateful decoder")

Signed-off-by Pin-yen Lin <[email protected]>

Reviewed-by Chen-Yu Tsai <[email protected]>

Reviewed-by Yunfei Dong <[email protected]>

Signed-off-by Hans Verkuil <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 .../media/platform/mediatek/vcodec/mtk_vcodec_dec_stateful.c   | 3 +++
 1 file changed, 3 insertions(+)

drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_stateful.c +3 -0

index 29991551cf614..0fbd030026c72 100644
@@ -584,6 +584,9 @@ static void mtk_init_vdec_params(struct mtk_vcodec_ctx *ctx)
 
 	if (!(ctx->dev->dec_capability & VCODEC_CAPABILITY_4K_DISABLED)) {
 		for (i = 0; i < num_supported_formats; i++) {
+			if (mtk_video_formats[i].type != MTK_FMT_DEC)
+				continue;
+
 			mtk_video_formats[i].frmsize.max_width =
 				VCODEC_DEC_4K_CODED_WIDTH;
 			mtk_video_formats[i].frmsize.max_height =

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:42 UTC #138 lore raw

PATCH 138/225 mailbox: mailbox-test: fix a locking issue in mbox_test_message_write()

From: Dan Carpenter <[email protected]>

[ Upstream commit 8fe72b76db79d694858e872370df49676bc3be8c ]

There was a bug where this code forgot to unlock the tdev->mutex if the kzalloc() failed. Fix this issue, by moving the allocation outside the lock.

Fixes 2d1e952a2b8e ("mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write()")

Signed-off-by Dan Carpenter <[email protected]>

Reviewed-by Lee Jones <[email protected]>

Signed-off-by Jassi Brar <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/mailbox/mailbox-test.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

drivers/mailbox/mailbox-test.c +6 -4

index 6dd5b9614452b..abcee58e851c2 100644
@@ -97,6 +97,7 @@ static ssize_t mbox_test_message_write(struct file *filp,
 				       size_t count, loff_t *ppos)
 {
 	struct mbox_test_device *tdev = filp->private_data;
+	char *message;
 	void *data;
 	int ret;

@@ -112,12 +113,13 @@ static ssize_t mbox_test_message_write(struct file *filp,
 		return -EINVAL;
 	}
 
-	mutex_lock(&tdev->mutex);
-
-	tdev->message = kzalloc(MBOX_MAX_MSG_LEN, GFP_KERNEL);
-	if (!tdev->message)
+	message = kzalloc(MBOX_MAX_MSG_LEN, GFP_KERNEL);
+	if (!message)
 		return -ENOMEM;
 
+	mutex_lock(&tdev->mutex);
+
+	tdev->message = message;
 	ret = copy_from_user(tdev->message, userbuf, count);
 	if (ret) {
 		ret = -EFAULT;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:43 UTC #139 lore raw

PATCH 139/225 drivers: base: cacheinfo: Fix shared_cpu_map changes in event of CPU hotplug

From: K Prateek Nayak <[email protected]>

[ Upstream commit 126310c9f669c9a8c875a3e5c2292299ca90225d ]

While building the shared_cpu_map, check if the cache level and cache type matches. On certain systems that build the cache topology based on the instance ID, there are cases where the same ID may repeat across multiple cache levels, leading inaccurate topology.

In event of CPU offlining, the cache_shared_cpu_map_remove() does not consider if IDs at same level are being compared. As a result, when same IDs repeat across different cache levels, the CPU going offline is not removed from all the shared_cpu_map.

Below is the output of cache topology of CPU8 and it's SMT sibling after CPU8 is offlined on a dual socket 3rd Generation AMD EPYC processor (2 x 64C/128T) running kernel release v6.3:

  # for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
    /sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
    /sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
    /sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
    /sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143

  # echo 0 > /sys/devices/system/cpu/cpu8/online

  # for i in /sys/devices/system/cpu/cpu136/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
    /sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list: 136
    /sys/devices/system/cpu/cpu136/cache/index1/shared_cpu_list: 8,136
    /sys/devices/system/cpu/cpu136/cache/index2/shared_cpu_list: 8,136
    /sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list: 9-15,136-143

CPU8 is removed from index0 (L1i) but remains in the shared_cpu_list of index1 (L1d) and index2 (L2). Since L1i, L1d, and L2 are shared by the SMT siblings, and they have the same cache instance ID, CPU 2 is only removed from the first index with matching ID which is index1 (L1i) in this case. With this fix, the results are as expected when performing the same experiment on the same system:

  # for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
    /sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
    /sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
    /sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
    /sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143

  # echo 0 > /sys/devices/system/cpu/cpu8/online

  # for i in /sys/devices/system/cpu/cpu136/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
    /sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list: 136
    /sys/devices/system/cpu/cpu136/cache/index1/shared_cpu_list: 136
    /sys/devices/system/cpu/cpu136/cache/index2/shared_cpu_list: 136
    /sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list: 9-15,136-143

When rebuilding topology, the same problem appears as cache_shared_cpu_map_setup() implements a similar logic. Consider the same 3rd Generation EPYC processor: CPUs in Core 1, that share the L1 and L2 caches, have L1 and L2 instance ID as 1. For all the CPUs on the second chiplet, the L3 ID is also 1 leading to grouping on CPUs from Core 1 (1, 17) and the entire second chiplet (8-15, 24-31) as CPUs sharing one cache domain. This went undetected since x86 processors depended on arch specific populate_cache_leaves() method to repopulate the shared_cpus_map when CPU came back online until kernel release v6.3-rc5.

Fixes 198102c9103f ("cacheinfo: Fix shared_cpu_map to handle shared caches at different levels")

Signed-off-by K Prateek Nayak <[email protected]>

Reviewed-by Sudeep Holla <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/base/cacheinfo.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

drivers/base/cacheinfo.c +20 -0

index c440d1af197a4..26e13887aba46 100644
@@ -280,6 +280,16 @@ static int cache_shared_cpu_map_setup(unsigned int cpu)
 				continue;/* skip if itself or no cacheinfo */
 			for (sib_index = 0; sib_index < cache_leaves(i); sib_index++) {
 				sib_leaf = per_cpu_cacheinfo_idx(i, sib_index);
+
+				/*
+				 * Comparing cache IDs only makes sense if the leaves
+				 * belong to the same cache level of same type. Skip
+				 * the check if level and type do not match.
+				 */
+				if (sib_leaf->level != this_leaf->level ||
+				    sib_leaf->type != this_leaf->type)
+					continue;
+
 				if (cache_leaves_are_shared(this_leaf, sib_leaf)) {
 					cpumask_set_cpu(cpu, &sib_leaf->shared_cpu_map);
 					cpumask_set_cpu(i, &this_leaf->shared_cpu_map);

@@ -311,6 +321,16 @@ static void cache_shared_cpu_map_remove(unsigned int cpu)
 
 			for (sib_index = 0; sib_index < cache_leaves(sibling); sib_index++) {
 				sib_leaf = per_cpu_cacheinfo_idx(sibling, sib_index);
+
+				/*
+				 * Comparing cache IDs only makes sense if the leaves
+				 * belong to the same cache level of same type. Skip
+				 * the check if level and type do not match.
+				 */
+				if (sib_leaf->level != this_leaf->level ||
+				    sib_leaf->type != this_leaf->type)
+					continue;
+
 				if (cache_leaves_are_shared(this_leaf, sib_leaf)) {
 					cpumask_clear_cpu(cpu, &sib_leaf->shared_cpu_map);
 					cpumask_clear_cpu(sibling, &this_leaf->shared_cpu_map);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:43 UTC #140 lore raw

PATCH 140/225 media: uvcvideo: Dont expose unsupported formats to userspace

Link https://bugzilla.kernel.org/show_bug.cgi?id=217252

From: Laurent Pinchart <[email protected]>

[ Upstream commit 81f3affa19d6ab0c32aef46b053838219eef7e71 ]

When the uvcvideo driver encounters a format descriptor with an unknown format GUID, it creates a corresponding struct uvc_format instance with the fcc field set to 0. Since commit 50459f103edf ("media: uvcvideo:
Remove format descriptions"), the driver relies on the V4L2 core to provide the format description string, which the V4L2 core can't do without a valid 4CC. This triggers a WARN_ON.

As a format with a zero 4CC can't be selected, it is unusable for applications. Ignore the format completely without creating a uvc_format instance, which fixes the warning.

Link https://bugzilla.redhat.com/show_bug.cgi?id=2180107

Fixes 50459f103edf ("media: uvcvideo: Remove format descriptions")

Signed-off-by Laurent Pinchart <[email protected]>

Reviewed-by Ricardo Ribalda <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/usb/uvc/uvc_driver.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

drivers/media/usb/uvc/uvc_driver.c +11 -5

index a9cdef07e6b14..191db831d7606 100644
@@ -251,14 +251,17 @@ static int uvc_parse_format(struct uvc_device *dev,
 		/* Find the format descriptor from its GUID. */
 		fmtdesc = uvc_format_by_guid(&buffer[5]);
 
-		if (fmtdesc != NULL) {
-			format->fcc = fmtdesc->fcc;
-		} else {
+		if (!fmtdesc) {
+			/*
+			 * Unknown video formats are not fatal errors, the
+			 * caller will skip this descriptor.
+			 */
 			dev_info(&streaming->intf->dev,
 				 "Unknown video format %pUl\n", &buffer[5]);
-			format->fcc = 0;
+			return 0;
 		}
 
+		format->fcc = fmtdesc->fcc;
 		format->bpp = buffer[21];
 
 		/*

@@ -675,7 +678,7 @@ static int uvc_parse_streaming(struct uvc_device *dev,
 	interval = (u32 *)&frame[nframes];
 
 	streaming->format = format;
-	streaming->nformats = nformats;
+	streaming->nformats = 0;
 
 	/* Parse the format descriptors. */
 	while (buflen > 2 && buffer[1] == USB_DT_CS_INTERFACE) {

@@ -689,7 +692,10 @@ static int uvc_parse_streaming(struct uvc_device *dev,
 				&interval, buffer, buflen);
 			if (ret < 0)
 				goto error;
+			if (!ret)
+				break;
 
+			streaming->nformats++;
 			frame += format->nframes;
 			format++;

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-06-07 20:43 UTC #141 lore raw

PATCH 141/225 iio: accel: st_accel: Fix invalid mount_matrix on devices without ACPI _ONT method

From: Hans de Goede <[email protected]>

commit 79b8ded9d9c595db9bd5b2f62f5f738b36de1e22 upstream.

When apply_acpi_orientation() fails, st_accel_common_probe() will fall back to iio_read_mount_matrix(), which checks for a mount-matrix device property and if that is not set falls back to the identity matrix.

But when a sensor has no ACPI companion fwnode, or when the ACPI fwnode does not have a "_ONT" method apply_acpi_orientation() was returning 0, causing iio_read_mount_matrix() to never get called resulting in an invalid mount_matrix:

[root@fedora ~]# cat /sys/bus/iio/devices/iio\:device0/mount_matrix (null), (null), (null); (null), (null), (null); (null), (null), (null)

Fix this by making apply_acpi_orientation() always return an error when it did not set the mount_matrix.

Fixes 3d8ad94bb175 ("iio: accel: st_sensors: Support generic mounting matrix")

Reviewed-by Linus Walleij <[email protected]>

Tested-by Marius Hoch <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/iio/accel/st_accel_core.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

drivers/iio/accel/st_accel_core.c +2 -2

@@ -1289,12 +1289,12 @@ static int apply_acpi_orientation(struct
 
 	adev = ACPI_COMPANION(indio_dev->dev.parent);
 	if (!adev)
-		return 0;
+		return -ENXIO;
 
 	/* Read _ONT data, which should be a package of 6 integers. */
 	status = acpi_evaluate_object(adev->handle, "_ONT", NULL, &buffer);
 	if (status == AE_NOT_FOUND) {
-		return 0;
+		return -ENXIO;
 	} else if (ACPI_FAILURE(status)) {
 		dev_warn(&indio_dev->dev, "failed to execute _ONT: %d\n",
 			 status);

Greg Kroah-Hartman

author maintainer

2023-06-07 20:43 UTC #142 lore raw

PATCH 142/225 iio: adc: mxs-lradc: fix the order of two cleanup operations

From: Jiakai Luo <[email protected]>

commit 27b2ed5b6d53cd62fc61c3f259ae52f5cac23b66 upstream.

Smatch reports:
drivers/iio/adc/mxs-lradc-adc.c:766 mxs_lradc_adc_probe() warn:
missing unwind goto?

the order of three init operation:
1.mxs_lradc_adc_trigger_init
2.iio_triggered_buffer_setup
3.mxs_lradc_adc_hw_init

thus, the order of three cleanup operation should be:
1.mxs_lradc_adc_hw_stop 2.iio_triggered_buffer_cleanup 3.mxs_lradc_adc_trigger_remove

we exchange the order of two cleanup operations, introducing the following differences:
1.if mxs_lradc_adc_trigger_init fails, returns directly; 2.if trigger_init succeeds but iio_triggered_buffer_setup fails, goto err_trig and remove the trigger.

In addition, we also reorder the unwind that goes on in the remove() callback to match the new ordering.

Fixes 6dd112b9f85e ("iio: adc: mxs-lradc: Add support for ADC driver")

Signed-off-by Jiakai Luo <[email protected]>

Reviewed-by Dongliang Mu <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/iio/adc/mxs-lradc-adc.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

drivers/iio/adc/mxs-lradc-adc.c +5 -5

@@ -757,13 +757,13 @@ static int mxs_lradc_adc_probe(struct pl
 
 	ret = mxs_lradc_adc_trigger_init(iio);
 	if (ret)
-		goto err_trig;
+		return ret;
 
 	ret = iio_triggered_buffer_setup(iio, &iio_pollfunc_store_time,
 					 &mxs_lradc_adc_trigger_handler,
 					 &mxs_lradc_adc_buffer_ops);
 	if (ret)
-		return ret;
+		goto err_trig;
 
 	adc->vref_mv = mxs_lradc_adc_vref_mv[lradc->soc];

@@ -801,9 +801,9 @@ static int mxs_lradc_adc_probe(struct pl
 
 err_dev:
 	mxs_lradc_adc_hw_stop(adc);
-	mxs_lradc_adc_trigger_remove(iio);
-err_trig:
 	iio_triggered_buffer_cleanup(iio);
+err_trig:
+	mxs_lradc_adc_trigger_remove(iio);
 	return ret;
 }

@@ -814,8 +814,8 @@ static int mxs_lradc_adc_remove(struct p
 
 	iio_device_unregister(iio);
 	mxs_lradc_adc_hw_stop(adc);
-	mxs_lradc_adc_trigger_remove(iio);
 	iio_triggered_buffer_cleanup(iio);
+	mxs_lradc_adc_trigger_remove(iio);
 
 	return 0;
 }

Greg Kroah-Hartman

author maintainer

2023-06-07 20:43 UTC #143 lore raw

PATCH 143/225 HID: google: add jewel USB id

From: Sung-Chi Li <[email protected]>

commit ed84c4517a5bc536e8572a01dfa11bc22a280d06 upstream.

Add 1 additional hammer-like device.

Signed-off-by Sung-Chi Li <[email protected]>

Signed-off-by Jiri Kosina <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/hid/hid-google-hammer.c |    2 ++
 drivers/hid/hid-ids.h           |    1 +
 2 files changed, 3 insertions(+)

drivers/hid/hid-google-hammer.c +2 -0

@@ -587,6 +587,8 @@ static const struct hid_device_id hammer
 	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
 		     USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_HAMMER) },
 	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
+		     USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_JEWEL) },
+	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
 		     USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_MAGNEMITE) },
 	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
 		     USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_MASTERBALL) },

drivers/hid/hid-ids.h +1 -0

@@ -523,6 +523,7 @@
 #define USB_DEVICE_ID_GOOGLE_MOONBALL	0x5044
 #define USB_DEVICE_ID_GOOGLE_DON	0x5050
 #define USB_DEVICE_ID_GOOGLE_EEL	0x5057
+#define USB_DEVICE_ID_GOOGLE_JEWEL	0x5061
 
 #define USB_VENDOR_ID_GOTOP		0x08f2
 #define USB_DEVICE_ID_SUPER_Q2		0x007f

Greg Kroah-Hartman

author maintainer

2023-06-07 20:43 UTC #144 lore raw

PATCH 144/225 HID: wacom: avoid integer overflow in wacom_intuos_inout()

From: Nikita Zhandarovich <[email protected]>

commit bd249b91977b768ea02bf84d04625d2690ad2b98 upstream.

If high bit is set to 1 in ((data[3] & 0x0f << 28), after all arithmetic operations and integer promotions are done, high bits in wacom->serial[idx] will be filled with 1s as well.
Avoid this, albeit unlikely, issue by specifying left operand's __u64 type for the right operand.

Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE.

Fixes 3bea733ab212 ("USB: wacom tablet driver reorganization")

Signed-off-by Nikita Zhandarovich <[email protected]>

Reviewed-by Ping Cheng <[email protected]>

Signed-off-by Jiri Kosina <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/hid/wacom_wac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/hid/wacom_wac.c +1 -1

@@ -826,7 +826,7 @@ static int wacom_intuos_inout(struct wac
 	/* Enter report */
 	if ((data[1] & 0xfc) == 0xc0) {
 		/* serial number of the tool */
-		wacom->serial[idx] = ((data[3] & 0x0f) << 28) +
+		wacom->serial[idx] = ((__u64)(data[3] & 0x0f) << 28) +
 			(data[4] << 20) + (data[5] << 12) +
 			(data[6] << 4) + (data[7] >> 4);

Greg Kroah-Hartman

author maintainer

2023-06-07 20:43 UTC #145 lore raw

PATCH 145/225 iio: imu: inv_icm42600: fix timestamp reset

From: Jean-Baptiste Maneyrol <[email protected]>

commit bbaae0c79ebd49f61ad942a8bf9e12bfc7f821bb upstream.

Timestamp reset is not done in the correct place. It must be done before enabling buffer. The reason is that interrupt timestamping is always happening when the chip is on, even if the corresponding sensor is off. When the sensor restarts, timestamp is wrong if you don't do a reset first.

Fixes ec74ae9fd37c ("iio: imu: inv_icm42600: add accurate timestamping")

Signed-off-by Jean-Baptiste Maneyrol <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c +5 -5

@@ -275,9 +275,14 @@ static int inv_icm42600_buffer_preenable
 {
 	struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
 	struct device *dev = regmap_get_device(st->map);
+	struct inv_icm42600_timestamp *ts = iio_priv(indio_dev);
 
 	pm_runtime_get_sync(dev);
 
+	mutex_lock(&st->lock);
+	inv_icm42600_timestamp_reset(ts);
+	mutex_unlock(&st->lock);
+
 	return 0;
 }

@@ -375,7 +380,6 @@ static int inv_icm42600_buffer_postdisab
 	struct device *dev = regmap_get_device(st->map);
 	unsigned int sensor;
 	unsigned int *watermark;
-	struct inv_icm42600_timestamp *ts;
 	struct inv_icm42600_sensor_conf conf = INV_ICM42600_SENSOR_CONF_INIT;
 	unsigned int sleep_temp = 0;
 	unsigned int sleep_sensor = 0;

@@ -385,11 +389,9 @@ static int inv_icm42600_buffer_postdisab
 	if (indio_dev == st->indio_gyro) {
 		sensor = INV_ICM42600_SENSOR_GYRO;
 		watermark = &st->fifo.watermark.gyro;
-		ts = iio_priv(st->indio_gyro);
 	} else if (indio_dev == st->indio_accel) {
 		sensor = INV_ICM42600_SENSOR_ACCEL;
 		watermark = &st->fifo.watermark.accel;
-		ts = iio_priv(st->indio_accel);
 	} else {
 		return -EINVAL;
 	}

@@ -417,8 +419,6 @@ static int inv_icm42600_buffer_postdisab
 	if (!st->fifo.on)
 		ret = inv_icm42600_set_temp_conf(st, false, &sleep_temp);
 
-	inv_icm42600_timestamp_reset(ts);
-
 out_unlock:
 	mutex_unlock(&st->lock);

Greg Kroah-Hartman

author maintainer

2023-06-07 20:43 UTC #146 lore raw

PATCH 146/225 dt-bindings: iio: adc: renesas,rcar-gyroadc: Fix adi,ad7476 compatible value

Link https://lore.kernel.org/r/6b328a3f52657c20759f3a5bb2fe033d47644ba8.1683635404.git.geert+renesas@glider.be open here

From: Geert Uytterhoeven <[email protected]>

commit 55720d242052e860b9fde445e302e0425722e7f1 upstream.

The conversion to json-schema accidentally dropped the "ad" part prefix from the compatible value.

Fixes 8c41245872e2 ("dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion.")

Signed-off-by Geert Uytterhoeven <[email protected]>

Reviewed-by Marek Vasut <[email protected]>

Reviewed-by Krzysztof Kozlowski <[email protected]>

Reviewed-by Wolfram Sang <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml +1 -1

@@ -86,7 +86,7 @@ patternProperties:
             of the MAX chips to the GyroADC, while MISO line of each Maxim
             ADC connects to a shared input pin of the GyroADC.
         enum:
-          - adi,7476
+          - adi,ad7476
           - fujitsu,mb88101a
           - maxim,max1162
           - maxim,max11100

Greg Kroah-Hartman

author maintainer

2023-06-07 20:43 UTC #147 lore raw

PATCH 147/225 iio: light: vcnl4035: fixed chip ID check

From: Frank Li <[email protected]>

commit a551c26e8e568fad42120843521529241b9bceec upstream.

VCNL4035 register(0xE) ID_L and ID_M define as:

ID_L: 0x80
ID_H: 7:6 (0:0)

       5:4 (0:0) slave address = 0x60 (7-bit)
           (0:1) slave address = 0x51 (7-bit)
           (1:0) slave address = 0x40 (7-bit)
           (1:0) slave address = 0x41 (7-bit)
       3:0 Version code default	(0:0:0:0)

So just check ID_L.

Fixes 55707294c4eb ("iio: light: Add support for vishay vcnl4035")

Signed-off-by Frank Li <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/iio/light/vcnl4035.c |    3 +++
 1 file changed, 3 insertions(+)

drivers/iio/light/vcnl4035.c +3 -0

@@ -8,6 +8,7 @@
  * TODO: Proximity
  */
 #include <linux/bitops.h>
+#include <linux/bitfield.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/pm_runtime.h>

@@ -42,6 +43,7 @@
 #define VCNL4035_ALS_PERS_MASK		GENMASK(3, 2)
 #define VCNL4035_INT_ALS_IF_H_MASK	BIT(12)
 #define VCNL4035_INT_ALS_IF_L_MASK	BIT(13)
+#define VCNL4035_DEV_ID_MASK		GENMASK(7, 0)
 
 /* Default values */
 #define VCNL4035_MODE_ALS_ENABLE	BIT(0)

@@ -413,6 +415,7 @@ static int vcnl4035_init(struct vcnl4035
 		return ret;
 	}
 
+	id = FIELD_GET(VCNL4035_DEV_ID_MASK, id);
 	if (id != VCNL4035_DEV_ID_VAL) {
 		dev_err(&data->client->dev, "Wrong id, got %x, expected %x\n",
 			id, VCNL4035_DEV_ID_VAL);

Greg Kroah-Hartman

author maintainer

2023-06-07 20:43 UTC #148 lore raw

PATCH 148/225 iio: adc: stm32-adc: skip adc-channels setup if none is present

From: Sean Nyekjaer <[email protected]>

commit 3e27ef0ced49f8ae7883c25fadf76a2086e99025 upstream.

If only adc differential channels are defined driver will fail with
stm32-adc: probe of 48003000.adc:adc@0 failed with error -22

Fix this by skipping the initialization if no channels are defined.

This applies only to the legacy way of initializing adc channels.

Fixes d7705f35448a ("iio: adc: stm32-adc: convert to device properties")

Signed-off-by Sean Nyekjaer <[email protected]>

Reviewed-by Olivier Moysan <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/iio/adc/stm32-adc.c |   42 +++++++++++++++++++++++-------------------
 1 file changed, 23 insertions(+), 19 deletions(-)

drivers/iio/adc/stm32-adc.c +23 ~~-19~~

@@ -1913,6 +1913,7 @@ static int stm32_adc_legacy_chan_init(st
 	struct stm32_adc_diff_channel diff[STM32_ADC_CH_MAX];
 	struct device *dev = &indio_dev->dev;
 	u32 num_diff = adc->num_diff;
+	int num_se = nchans - num_diff;
 	int size = num_diff * sizeof(*diff) / sizeof(u32);
 	int scan_index = 0, ret, i, c;
 	u32 smp = 0, smps[STM32_ADC_CH_MAX], chans[STM32_ADC_CH_MAX];

@@ -1939,29 +1940,32 @@ static int stm32_adc_legacy_chan_init(st
 			scan_index++;
 		}
 	}
-
-	ret = device_property_read_u32_array(dev, "st,adc-channels", chans,
-					     nchans);
-	if (ret)
-		return ret;
-
-	for (c = 0; c < nchans; c++) {
-		if (chans[c] >= adc_info->max_channels) {
-			dev_err(&indio_dev->dev, "Invalid channel %d\n",
-				chans[c]);
-			return -EINVAL;
+	if (num_se > 0) {
+		ret = device_property_read_u32_array(dev, "st,adc-channels", chans, num_se);
+		if (ret) {
+			dev_err(&indio_dev->dev, "Failed to get st,adc-channels %d\n", ret);
+			return ret;
 		}
 
-		/* Channel can't be configured both as single-ended & diff */
-		for (i = 0; i < num_diff; i++) {
-			if (chans[c] == diff[i].vinp) {
-				dev_err(&indio_dev->dev, "channel %d misconfigured\n",	chans[c]);
+		for (c = 0; c < num_se; c++) {
+			if (chans[c] >= adc_info->max_channels) {
+				dev_err(&indio_dev->dev, "Invalid channel %d\n",
+					chans[c]);
 				return -EINVAL;
 			}
+
+			/* Channel can't be configured both as single-ended & diff */
+			for (i = 0; i < num_diff; i++) {
+				if (chans[c] == diff[i].vinp) {
+					dev_err(&indio_dev->dev, "channel %d misconfigured\n",
+						chans[c]);
+					return -EINVAL;
+				}
+			}
+			stm32_adc_chan_init_one(indio_dev, &channels[scan_index],
+						chans[c], 0, scan_index, false);
+			scan_index++;
 		}
-		stm32_adc_chan_init_one(indio_dev, &channels[scan_index],
-					chans[c], 0, scan_index, false);
-		scan_index++;
 	}
 
 	if (adc->nsmps > 0) {

@@ -2153,7 +2157,7 @@ static int stm32_adc_chan_fw_init(struct
 
 	if (legacy)
 		ret = stm32_adc_legacy_chan_init(indio_dev, adc, channels,
-						 num_channels);
+						 timestamping ? num_channels - 1 : num_channels);
 	else
 		ret = stm32_adc_generic_chan_init(indio_dev, adc, channels);
 	if (ret < 0)

Greg Kroah-Hartman

author maintainer

2023-06-07 20:43 UTC #149 lore raw

PATCH 149/225 iio: adc: ad_sigma_delta: Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag

From: Masahiro Honda <[email protected]>

commit 626d312028bec44209d0ecd5beaa9b1aa8945f7d upstream.

The Sigma-Delta ADCs supported by this driver can use SDO as an interrupt line to indicate the completion of a conversion. However, some devices cannot properly detect the completion of a conversion by an interrupt. This is for the reason mentioned in the following commit.

commit e9849777d0e2 ("genirq: Add flag to force mask in

                      disable_irq[_nosync]()")

A read operation is performed by an extra interrupt before the completion of a conversion. At this time, the value read from the ADC data register is the same as the previous conversion result. This patch fixes the issue by setting IRQ_DISABLE_UNLAZY flag.

Fixes 0c6ef985a1fd ("iio: adc: ad7791: fix IRQ flags")

Fixes 1a913270e57a ("iio: adc: ad7793: Fix IRQ flag")

Fixes e081102f3077 ("iio: adc: ad7780: Fix IRQ flag")

Fixes 89a86da5cb8e ("iio: adc: ad7192: Add IRQ flag")

Fixes 79ef91493f54 ("iio: adc: ad7124: Set IRQ type to falling")

Signed-off-by Masahiro Honda <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/iio/adc/ad_sigma_delta.c |    4 ++++
 1 file changed, 4 insertions(+)

drivers/iio/adc/ad_sigma_delta.c +4 -0

@@ -584,6 +584,10 @@ static int devm_ad_sd_probe_trigger(stru
 	init_completion(&sigma_delta->completion);
 
 	sigma_delta->irq_dis = true;
+
+	/* the IRQ core clears IRQ_DISABLE_UNLAZY flag when freeing an IRQ */
+	irq_set_status_flags(sigma_delta->spi->irq, IRQ_DISABLE_UNLAZY);
+
 	ret = devm_request_irq(dev, sigma_delta->spi->irq,
 			       ad_sd_data_rdy_trig_poll,
 			       sigma_delta->info->irq_flags | IRQF_NO_AUTOEN,

Greg Kroah-Hartman

author maintainer

2023-06-07 20:45 UTC #150 lore raw

PATCH 150/225 iio: dac: mcp4725: Fix i2c_master_send() return value handling

From: Marek Vasut <[email protected]>

commit 09d3bec7009186bdba77039df01e5834788b3f95 upstream.

The i2c_master_send() returns number of sent bytes on success, or negative on error. The suspend/resume callbacks expect zero on success and non-zero on error. Adapt the return value of the i2c_master_send() to the expectation of the suspend and resume callbacks, including proper validation of the return value.

Fixes cf35ad61aca2 ("iio: add mcp4725 I2C DAC driver")

Signed-off-by Marek Vasut <[email protected]>

Reviewed-by Uwe Kleine-König <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/iio/dac/mcp4725.c |   16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

drivers/iio/dac/mcp4725.c +14 -2

@@ -47,12 +47,18 @@ static int mcp4725_suspend(struct device
 	struct mcp4725_data *data = iio_priv(i2c_get_clientdata(
 		to_i2c_client(dev)));
 	u8 outbuf[2];
+	int ret;
 
 	outbuf[0] = (data->powerdown_mode + 1) << 4;
 	outbuf[1] = 0;
 	data->powerdown = true;
 
-	return i2c_master_send(data->client, outbuf, 2);
+	ret = i2c_master_send(data->client, outbuf, 2);
+	if (ret < 0)
+		return ret;
+	else if (ret != 2)
+		return -EIO;
+	return 0;
 }
 
 static int mcp4725_resume(struct device *dev)

@@ -60,13 +66,19 @@ static int mcp4725_resume(struct device
 	struct mcp4725_data *data = iio_priv(i2c_get_clientdata(
 		to_i2c_client(dev)));
 	u8 outbuf[2];
+	int ret;
 
 	/* restore previous DAC value */
 	outbuf[0] = (data->dac_value >> 8) & 0xf;
 	outbuf[1] = data->dac_value & 0xff;
 	data->powerdown = false;
 
-	return i2c_master_send(data->client, outbuf, 2);
+	ret = i2c_master_send(data->client, outbuf, 2);
+	if (ret < 0)
+		return ret;
+	else if (ret != 2)
+		return -EIO;
+	return 0;
 }
 static DEFINE_SIMPLE_DEV_PM_OPS(mcp4725_pm_ops, mcp4725_suspend,
 				mcp4725_resume);

Greg Kroah-Hartman

author maintainer

2023-06-07 20:43 UTC #151 lore raw

PATCH 151/225 iio: addac: ad74413: fix resistance input processing

From: Rasmus Villemoes <[email protected]>

commit 24febc99ca725dcf42d57168a2f4e8a75a5ade92 upstream.

On success, ad74413r_get_single_adc_result() returns IIO_VAL_INT aka
1. So currently, the IIO_CHAN_INFO_PROCESSED case is effectively equivalent to the IIO_CHAN_INFO_RAW case, and we never call ad74413r_adc_to_resistance_result() to convert the adc measurement to ohms.

Check ret for being negative rather than non-zero.

Fixes fea251b6a5dbd (iio: addac: add AD74413R driver)

Signed-off-by Rasmus Villemoes <[email protected]>

Reviewed-by Nuno Sa <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/iio/addac/ad74413r.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/iio/addac/ad74413r.c +1 -1

@@ -973,7 +973,7 @@ static int ad74413r_read_raw(struct iio_
 
 		ret = ad74413r_get_single_adc_result(indio_dev, chan->channel,
 						     val);
-		if (ret)
+		if (ret < 0)
 			return ret;
 
 		ad74413r_adc_to_resistance_result(*val, val);

Greg Kroah-Hartman

author maintainer

2023-06-07 20:44 UTC #152 lore raw

PATCH 152/225 iio: adc: ad7192: Change "shorted" channels to differential

From: Paul Cercueil <[email protected]>

commit e55245d115bb9054cb72cdd5dda5660f4484873a upstream.

The AD7192 provides a specific channel configuration where both negative and positive inputs are connected to AIN2. This was represented in the ad7192 driver as a IIO channel with .channel = 2 and .extended_name set to "shorted".

The problem with this approach, is that the driver provided two IIO channels with the identifier .channel = 2; one "shorted" and the other not. This goes against the IIO ABI, as a channel identifier should be unique.

Address this issue by changing "shorted" channels to being differential instead, with channel 2 vs. itself, as we're actually measuring AIN2 vs. itself.

Note that the fix tag is for the commit that moved the driver out of staging. The bug existed before that, but backporting would become very complex further down and unlikely to happen.

Fixes b581f748cce0 ("staging: iio: adc: ad7192: move out of staging")

Signed-off-by Paul Cercueil <[email protected]>

Co-developed-by Alisa Roman <[email protected]>

Signed-off-by Alisa Roman <[email protected]>

Reviewed-by Nuno Sa <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/iio/adc/ad7192.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

drivers/iio/adc/ad7192.c +2 -6

@@ -898,10 +898,6 @@ static const struct iio_info ad7195_info
 	__AD719x_CHANNEL(_si, _channel1, -1, _address, NULL, IIO_VOLTAGE, \
 		BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info)
 
-#define AD719x_SHORTED_CHANNEL(_si, _channel1, _address) \
-	__AD719x_CHANNEL(_si, _channel1, -1, _address, "shorted", IIO_VOLTAGE, \
-		BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info)
-
 #define AD719x_TEMP_CHANNEL(_si, _address) \
 	__AD719x_CHANNEL(_si, 0, -1, _address, NULL, IIO_TEMP, 0, NULL)

@@ -909,7 +905,7 @@ static const struct iio_chan_spec ad7192
 	AD719x_DIFF_CHANNEL(0, 1, 2, AD7192_CH_AIN1P_AIN2M),
 	AD719x_DIFF_CHANNEL(1, 3, 4, AD7192_CH_AIN3P_AIN4M),
 	AD719x_TEMP_CHANNEL(2, AD7192_CH_TEMP),
-	AD719x_SHORTED_CHANNEL(3, 2, AD7192_CH_AIN2P_AIN2M),
+	AD719x_DIFF_CHANNEL(3, 2, 2, AD7192_CH_AIN2P_AIN2M),
 	AD719x_CHANNEL(4, 1, AD7192_CH_AIN1),
 	AD719x_CHANNEL(5, 2, AD7192_CH_AIN2),
 	AD719x_CHANNEL(6, 3, AD7192_CH_AIN3),

@@ -923,7 +919,7 @@ static const struct iio_chan_spec ad7193
 	AD719x_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M),
 	AD719x_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M),
 	AD719x_TEMP_CHANNEL(4, AD7193_CH_TEMP),
-	AD719x_SHORTED_CHANNEL(5, 2, AD7193_CH_AIN2P_AIN2M),
+	AD719x_DIFF_CHANNEL(5, 2, 2, AD7193_CH_AIN2P_AIN2M),
 	AD719x_CHANNEL(6, 1, AD7193_CH_AIN1),
 	AD719x_CHANNEL(7, 2, AD7193_CH_AIN2),
 	AD719x_CHANNEL(8, 3, AD7193_CH_AIN3),

Greg Kroah-Hartman

author maintainer

2023-06-07 20:44 UTC #153 lore raw

PATCH 153/225 iio: adc: stm32-adc: skip adc-diff-channels setup if none is present

From: Sean Nyekjaer <[email protected]>

commit 9c0d6ccd7d6bbd275e390b55a3390b4274291d95 upstream.

If no adc differential channels are defined driver will fail with EINVAL:
stm32-adc: probe of 48003000.adc:adc@0 failed with error -22

Fix this by skipping the initialization if no channels are defined.

This applies only to the legacy way of initializing adc channels.

Fixes d7705f35448a ("iio: adc: stm32-adc: convert to device properties")

Signed-off-by Sean Nyekjaer <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/iio/adc/stm32-adc.c |   19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

drivers/iio/adc/stm32-adc.c +9 ~~-10~~

@@ -1882,16 +1882,15 @@ static int stm32_adc_get_legacy_chan_cou
 	 * to get the *real* number of channels.
 	 */
 	ret = device_property_count_u32(dev, "st,adc-diff-channels");
-	if (ret < 0)
-		return ret;
-
-	ret /= (int)(sizeof(struct stm32_adc_diff_channel) / sizeof(u32));
-	if (ret > adc_info->max_channels) {
-		dev_err(&indio_dev->dev, "Bad st,adc-diff-channels?\n");
-		return -EINVAL;
-	} else if (ret > 0) {
-		adc->num_diff = ret;
-		num_channels += ret;
+	if (ret > 0) {
+		ret /= (int)(sizeof(struct stm32_adc_diff_channel) / sizeof(u32));
+		if (ret > adc_info->max_channels) {
+			dev_err(&indio_dev->dev, "Bad st,adc-diff-channels?\n");
+			return -EINVAL;
+		} else if (ret > 0) {
+			adc->num_diff = ret;
+			num_channels += ret;
+		}
 	}
 
 	/* Optional sample time is provided either for each, or all channels */

Greg Kroah-Hartman

author maintainer

2023-06-07 20:44 UTC #154 lore raw

PATCH 154/225 iio: dac: build ad5758 driver when AD5758 is selected

From: Lukas Bulwahn <[email protected]>

commit a146eccb68be161ae9eab5f3f68bb0ed7c0fbaa8 upstream.

Commit 28d1a7ac2a0d ("iio: dac: Add AD5758 support") adds the config AD5758 and the corresponding driver ad5758.c. In the Makefile, the ad5758 driver is however included when AD5755 is selected, not when AD5758 is selected.

Probably, this was simply a mistake that happened by copy-and-paste and forgetting to adjust the actual line. Surprisingly, no one has ever noticed that this driver is actually only included when AD5755 is selected and that the config AD5758 has actually no effect on the build.

Fixes 28d1a7ac2a0d ("iio: dac: Add AD5758 support")

Signed-off-by Lukas Bulwahn <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/iio/dac/Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/iio/dac/Makefile +1 -1

@@ -17,7 +17,7 @@ obj-$(CONFIG_AD5592R_BASE) += ad5592r-ba
 obj-$(CONFIG_AD5592R) += ad5592r.o
 obj-$(CONFIG_AD5593R) += ad5593r.o
 obj-$(CONFIG_AD5755) += ad5755.o
-obj-$(CONFIG_AD5755) += ad5758.o
+obj-$(CONFIG_AD5758) += ad5758.o
 obj-$(CONFIG_AD5761) += ad5761.o
 obj-$(CONFIG_AD5764) += ad5764.o
 obj-$(CONFIG_AD5766) += ad5766.o

Greg Kroah-Hartman

author maintainer

2023-06-07 20:44 UTC #155 lore raw

PATCH 155/225 net: usb: qmi_wwan: Set DTR quirk for BroadMobi BM818

From: Sebastian Krzyszkowiak <[email protected]>

commit 36936a56e1814f6c526fe71fbf980beab4f5577a upstream.

BM818 is based on Qualcomm MDM9607 chipset.

Fixes 9a07406b00cd ("net: usb: qmi_wwan: Add the BroadMobi BM818 card")

Signed-off-by Sebastian Krzyszkowiak <[email protected]>

Acked-by Bjørn Mork <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/usb/qmi_wwan.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/net/usb/qmi_wwan.c +1 -1

@@ -1324,7 +1324,7 @@ static const struct usb_device_id produc
 	{QMI_FIXED_INTF(0x2001, 0x7e3d, 4)},	/* D-Link DWM-222 A2 */
 	{QMI_FIXED_INTF(0x2020, 0x2031, 4)},	/* Olicard 600 */
 	{QMI_FIXED_INTF(0x2020, 0x2033, 4)},	/* BroadMobi BM806U */
-	{QMI_FIXED_INTF(0x2020, 0x2060, 4)},	/* BroadMobi BM818 */
+	{QMI_QUIRK_SET_DTR(0x2020, 0x2060, 4)},	/* BroadMobi BM818 */
 	{QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)},    /* Sierra Wireless MC7700 */
 	{QMI_FIXED_INTF(0x114f, 0x68a2, 8)},    /* Sierra Wireless MC7750 */
 	{QMI_FIXED_INTF(0x1199, 0x68a2, 8)},	/* Sierra Wireless MC7710 in QMI mode */

Greg Kroah-Hartman

author maintainer

2023-06-07 20:45 UTC #156 lore raw

PATCH 156/225 dt-bindings: usb: snps,dwc3: Fix "snps,hsphy_interface" type

From: Marek Vasut <[email protected]>

commit 7b32040f6d7f885ffc09a6df7c17992d56d2eab8 upstream.

The "snps,hsphy_interface" is string, not u8. Fix the type.

Fixes 389d77658801 ("dt-bindings: usb: Convert DWC USB3 bindings to DT schema")

Cc stable <[email protected]>

Reviewed-by Krzysztof Kozlowski <[email protected]>

Signed-off-by Marek Vasut <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 Documentation/devicetree/bindings/usb/snps,dwc3.yaml |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Documentation/devicetree/bindings/usb/snps,dwc3.yaml +1 -1

@@ -260,7 +260,7 @@ properties:
     description:
       High-Speed PHY interface selection between UTMI+ and ULPI when the
       DWC_USB3_HSPHY_INTERFACE has value 3.
-    $ref: /schemas/types.yaml#/definitions/uint8
+    $ref: /schemas/types.yaml#/definitions/string
     enum: [utmi, ulpi]
 
   snps,quirk-frame-length-adjustment:

Greg Kroah-Hartman

author maintainer

2023-06-07 20:45 UTC #157 lore raw

PATCH 157/225 usb: cdns3: fix NCM gadget RX speed 20x slow than expection at iMX8QM

From: Frank Li <[email protected]>

commit dbe678f6192f27879ac9ff6bc7a1036aad85aae9 upstream.

At iMX8QM platform, enable NCM gadget and run 'iperf3 -s'. At host, run 'iperf3 -V -c fe80::6863:98ff:feef:3e0%enxc6e147509498'

[  5]   0.00-1.00   sec  1.55 MBytes  13.0 Mbits/sec   90   4.18 KBytes
[  5]   1.00-2.00   sec  1.44 MBytes  12.0 Mbits/sec   75   4.18 KBytes
[  5]   2.00-3.00   sec  1.48 MBytes  12.4 Mbits/sec   75   4.18 KBytes

Expected speed should be bigger than 300Mbits/sec.

The root cause of this performance drop was found to be data corruption happening at 4K borders in some Ethernet packets, leading to TCP checksum errors. This corruption occurs from the position (4K - (address & 0x7F)) to 4K. The u_ether function's allocation of skb_buff reserves 64B, meaning all RX addresses resemble 0xXXXX0040.

Force trb_burst_size to 16 can fix this problem.

Fixes 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")

Signed-off-by Frank Li <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/usb/cdns3/cdns3-gadget.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

drivers/usb/cdns3/cdns3-gadget.c +13 -0

@@ -2097,6 +2097,19 @@ int cdns3_ep_config(struct cdns3_endpoin
 	else
 		priv_ep->trb_burst_size = 16;
 
+	/*
+	 * In versions preceding DEV_VER_V2, for example, iMX8QM, there exit the bugs
+	 * in the DMA. These bugs occur when the trb_burst_size exceeds 16 and the
+	 * address is not aligned to 128 Bytes (which is a product of the 64-bit AXI
+	 * and AXI maximum burst length of 16 or 0xF+1, dma_axi_ctrl0[3:0]). This
+	 * results in data corruption when it crosses the 4K border. The corruption
+	 * specifically occurs from the position (4K - (address & 0x7F)) to 4K.
+	 *
+	 * So force trb_burst_size to 16 at such platform.
+	 */
+	if (priv_dev->dev_ver < DEV_VER_V2)
+		priv_ep->trb_burst_size = 16;
+
 	mult = min_t(u8, mult, EP_CFG_MULT_MAX);
 	buffering = min_t(u8, buffering, EP_CFG_BUFFERING_MAX);
 	maxburst = min_t(u8, maxburst, EP_CFG_MAXBURST_MAX);

Greg Kroah-Hartman

author maintainer

2023-06-07 20:45 UTC #158 lore raw

PATCH 158/225 usb: gadget: f_fs: Add unbind event before functionfs_unbind

From: Uttkarsh Aggarwal <[email protected]>

commit efb6b535207395a5c7317993602e2503ca8cb4b3 upstream.

While exercising the unbind path, with the current implementation the functionfs_unbind would be calling which waits for the ffs->mutex to be available, however within the same time ffs_ep0_read is invoked & if no setup packets are pending, it will invoke function wait_event_interruptible_exclusive_locked_irq which by definition waits for the ev.count to be increased inside the same mutex for which functionfs_unbind is waiting.
This creates deadlock situation because the functionfs_unbind won't get the lock until ev.count is increased which can only happen if the caller ffs_func_unbind can proceed further.

Following is the illustration:

	CPU1				CPU2

ffs_func_unbind() ffs_ep0_read()

				mutex_lock(ffs->mutex)
				wait_event(ffs->ev.count)

functionfs_unbind()
mutex_lock(ffs->mutex)
mutex_unlock(ffs->mutex)

ffs_event_add()

Fix this by moving the event unbind before functionfs_unbind to ensure the ev.count is incrased properly.

Fixes 6a19da111057 ("usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait")

Cc stable <[email protected]>

Signed-off-by Uttkarsh Aggarwal <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/usb/gadget/function/f_fs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/usb/gadget/function/f_fs.c +1 -1

@@ -3620,6 +3620,7 @@ static void ffs_func_unbind(struct usb_c
 	/* Drain any pending AIO completions */
 	drain_workqueue(ffs->io_completion_wq);
 
+	ffs_event_add(ffs, FUNCTIONFS_UNBIND);
 	if (!--opts->refcnt)
 		functionfs_unbind(ffs);

@@ -3644,7 +3645,6 @@ static void ffs_func_unbind(struct usb_c
 	func->function.ssp_descriptors = NULL;
 	func->interfaces_nums = NULL;
 
-	ffs_event_add(ffs, FUNCTIONFS_UNBIND);
 }
 
 static struct usb_function *ffs_alloc(struct usb_function_instance *fi)

Greg Kroah-Hartman

author maintainer

2023-06-07 20:45 UTC #159 lore raw

PATCH 159/225 md/raid5: fix miscalculation of end_sector in raid5_read_one_chunk()

From: Yu Kuai <[email protected]>

commit 8557dc27126949c702bd3aafe8a7e0b7e4fcb44c upstream.

'end_sector' is compared to 'rdev->recovery_offset', which is offset to rdev, however, commit e82ed3a4fbb5 ("md/raid6: refactor raid5_read_one_chunk") changes the calculation of 'end_sector' to offset to the array. Fix this miscalculation.

Fixes e82ed3a4fbb5 ("md/raid6: refactor raid5_read_one_chunk")

Cc [email protected] # v5.12+

Signed-off-by Yu Kuai <[email protected]>