common/btrfs: use _scratch_cycle_mount to ensure all page caches are dropped
RFC PATCH 1/1 common/btrfs: use _scratch_cycle_mount to ensure all page caches are dropped
[BUG]
There is a chance that btrfs/266 would fail on aarch64 with 64K page size. (No matter if it's 4K sector size or 64K sector size)
The failure indicates that one or more mirrors are not properly fixed.
[CAUSE]
I have added some trace events into the btrfs IO paths, including __btrfs_submit_bio() and __end_bio_extent_readpage().
When the test failed, the trace looks like this:
112819.764977: __btrfs_submit_bio: r/i=5/257 fileoff=0 mirror=1 len=196608 pid=33663
^^^ Initial read on the full 192K file
112819.766604: __btrfs_submit_bio: r/i=5/257 fileoff=0 mirror=2 len=65536 pid=21806
^^^ Repair on the first 64K block
Which would success
112819.766760: __btrfs_submit_bio: r/i=5/257 fileoff=65536 mirror=2 len=65536 pid=21806
^^^ Repair on the second 64K block
Which would fail
112819.767625: __btrfs_submit_bio: r/i=5/257 fileoff=65536 mirror=3 len=65536 pid=21806
^^^ Repair on the third 64K block
Which would success
112819.770999: end_bio_extent_readpage: read finished, r/i=5/257 fileoff=0 len=196608 mirror=1 status=0
^^^ The repair succeeded, the
full 192K read finished.
112819.864851: __btrfs_submit_bio: r/i=5/257 fileoff=0 mirror=3 len=196608 pid=33665 112819.874854: __btrfs_submit_bio: r/i=5/257 fileoff=0 mirror=1 len=65536 pid=31369 112819.875029: __btrfs_submit_bio: r/i=5/257 fileoff=131072 mirror=1 len=65536 pid=31369 112819.876926: end_bio_extent_readpage: read finished, r/i=5/257 fileoff=0 len=196608 mirror=3 status=0
But above read only happen for mirror 1 and mirror 3, mirror 2 is not involved.
This means by somehow, the read on mirror 2 didn't happen, mostly due to something wrong during the drop_caches call.
It may be an async operation or some hardware specific behavior.
On the other hand, for test cases doing the same operation but utilizing direct IO, aka btrfs/267, it never fails as we never populate the page cache thus would always read from the disk.
[WORKAROUND]
The root cause is in the "echo 3 > drop_caches", which I'm still debugging.
But at the same time, we can workaround the problem by forcing a cycle mount of scratch device, inside _btrfs_buffered_read_on_mirror().
By this we can ensure all page caches are dropped no matter if drop_caches is working correctly.
With this patch, I no longer hit the failure on aarch64 with 64K page size anymore, while before this the test case would always fail during a -I 10 run.
---
RFC:
The root cause is still inside that "echo 3 > drop_caches", but I don't have any better solution if such fundamental debug function is not working as expected.
Thus this is only a workaround, before I can pin down the root cause of that drop_cache hiccup.
--- common/btrfs | 5 +++++ 1 file changed, 5 insertions(+)
common/btrfs +5 -0
@@ -599,6 +599,11 @@ _btrfs_buffered_read_on_mirror() local size=$5 echo 3 > /proc/sys/vm/drop_caches + # Above drop_caches doesn't seem to drop every pages on aarch64 with + # 64K page size. + # So here as a workaround, cycle mount the SCRATCH_MNT to ensure + # the cache are dropped. + _scratch_cycle_mount while [[ -z $( (( BASHPID % nr_mirrors == mirror )) && exec $XFS_IO_PROG \ -c "pread -b $size $offset $size" $file) ]]; do
Signature · 1 line
2.39.1
common/btrfs _btrfs_buffered_read_on_mirror() · line 606
Quoted 6 lines · Qu Wenruo
common/btrfs +5
-0echo 3 > /proc/sys/vm/drop_caches + # Above drop_caches doesn't seem to drop every pages on aarch64 with + # 64K page size. + # So here as a workaround, cycle mount the SCRATCH_MNT to ensure + # the cache are dropped. + _scratch_cycle_mount
The _scratch_cycle_mount looks ok to me, but if we do that, there is really no point in doing the drop_caches as well.
Quoted 10 lines · Christoph Hellwig
common/btrfs _btrfs_buffered_read_on_mirror() · line 606
Quoted 6 lines · Qu Wenruo
echo 3 >
/proc/sys/vm/drop_cachescommon/btrfs +5
-0+ # Above drop_caches doesn't seem to drop every pages on aarch64 with + # 64K page size. + # So here as a workaround, cycle mount the SCRATCH_MNT to ensure + # the cache are dropped. + _scratch_cycle_mountThe
_scratch_cycle_mountlooks ok to me, but if we do that, there is really no point in doing thedrop_cachesas well.
Yep, we can remove that line. It's mostly a reminder for me to dig out why that drop_caches doesn't work as expected.
Thanks,
Qu
Quoted 14 lines · Qu Wenruo
Quoted 10 lines · Christoph Hellwig
common/btrfs _btrfs_buffered_read_on_mirror() · line 606
Quoted 6 lines · Qu Wenruo
echo 3 >
/proc/sys/vm/drop_cachescommon/btrfs +5
-0+ # Above drop_caches doesn't seem to drop every pages on aarch64 with + # 64K page size. + # So here as a workaround, cycle mount the SCRATCH_MNT to ensure + # the cache are dropped. + _scratch_cycle_mountThe
_scratch_cycle_mountlooks ok to me, but if we do that, there is really no point in doing thedrop_cachesas well.
Quoted 2 lines
Yep, we can remove that line. It's mostly a reminder for me to dig out why that
drop_cachesdoesn't work as expected.
How about leaving a reminder/explanation in comment, remove that real drop_caches line. If no objection, I'll merge this patch with this change.
Thanks,
Zorro
Quoted 4 lines
Thanks,
Qu
Quoted 15 lines · Zorro Lang
Quoted 14 lines · Qu Wenruo
Quoted 10 lines · Christoph Hellwig
common/btrfs _btrfs_buffered_read_on_mirror() · line 606
Quoted 6 lines · Qu Wenruo
echo 3 >
/proc/sys/vm/drop_cachescommon/btrfs +5
-0+ # Above drop_caches doesn't seem to drop every pages on aarch64 with + # 64K page size. + # So here as a workaround, cycle mount the SCRATCH_MNT to ensure + # the cache are dropped. + _scratch_cycle_mountThe
_scratch_cycle_mountlooks ok to me, but if we do that, there is really no point in doing thedrop_cachesas well.
Quoted 5 lines
Quoted 2 lines
Yep, we can remove that line. It's mostly a reminder for me to dig out why that
drop_cachesdoesn't work as expected.How about leaving a reminder/explanation in comment, remove that real
drop_cachesline. If no objection, I'll merge this patch with this change.
We can reuse the comment in the patch, which is already mentioning drop_caches doesn't always work at least on aarch64.
I'm fine dropping the "echo 3 > drop_caches" line.
Thanks,
Qu
Quoted 9 lines
Thanks,
ZorroQuoted 4 lines
Thanks,
Qu
Quoted 76 lines · Qu Wenruo
[BUG]
There is a chance that btrfs/266 would fail on aarch64 with 64K page size. (No matter if it's 4K sector size or 64K sector size)The failure indicates that one or more mirrors are not properly fixed.
[CAUSE]
I have added some trace events into the btrfs IO paths, including__btrfs_submit_bio()and__end_bio_extent_readpage().When the test failed, the trace looks like this:
112819.764977:
__btrfs_submit_bio: r/i=5/257 fileoff=0 mirror=1 len=196608 pid=33663
^^^ Initial read on the full 192K file
112819.766604:__btrfs_submit_bio: r/i=5/257 fileoff=0 mirror=2 len=65536 pid=21806
^^^ Repair on the first 64K block
Which would success
112819.766760:__btrfs_submit_bio: r/i=5/257 fileoff=65536 mirror=2 len=65536 pid=21806
^^^ Repair on the second 64K block
Which would fail
112819.767625:__btrfs_submit_bio: r/i=5/257 fileoff=65536 mirror=3 len=65536 pid=21806
^^^ Repair on the third 64K block
Which would success
112819.770999:end_bio_extent_readpage: read finished, r/i=5/257 fileoff=0 len=196608 mirror=1 status=0
^^^ The repair succeeded, the
full 192K read finished.112819.864851:
__btrfs_submit_bio: r/i=5/257 fileoff=0 mirror=3 len=196608 pid=33665 112819.874854:__btrfs_submit_bio: r/i=5/257 fileoff=0 mirror=1 len=65536 pid=31369 112819.875029:__btrfs_submit_bio: r/i=5/257 fileoff=131072 mirror=1 len=65536 pid=31369 112819.876926:end_bio_extent_readpage: read finished, r/i=5/257 fileoff=0 len=196608 mirror=3 status=0But above read only happen for mirror 1 and mirror 3, mirror 2 is not involved.
This means by somehow, the read on mirror 2 didn't happen, mostly due to something wrong during thedrop_cachescall.It may be an async operation or some hardware specific behavior.
On the other hand, for test cases doing the same operation but utilizing direct IO, aka btrfs/267, it never fails as we never populate the page cache thus would always read from the disk.
[WORKAROUND]
The root cause is in the "echo 3 >drop_caches", which I'm still debugging.But at the same time, we can workaround the problem by forcing a cycle mount of scratch device, inside
_btrfs_buffered_read_on_mirror().By this we can ensure all page caches are dropped no matter if
drop_cachesis working correctly.With this patch, I no longer hit the failure on aarch64 with 64K page size anymore, while before this the test case would always fail during a -I 10 run.
Signed-off-by Qu Wenruo <[email protected]>---
RFC:
The root cause is still inside that "echo 3 >drop_caches", but I don't have any better solution if such fundamental debug function is not working as expected.Thus this is only a workaround, before I can pin down the root cause of that
drop_cachehiccup.--- common/btrfs | 5 +++++ 1 file changed, 5 insertions(+)common/btrfs +0
-0
common/btrfs _btrfs_buffered_read_on_mirror() · line 606
Quoted 8 lines
common/btrfs +5
-0@@ -599,6 +599,11 @@ _btrfs_buffered_read_on_mirror() local size=$5 echo 3 > /proc/sys/vm/drop_caches + # Above drop_caches doesn't seem to drop every pages on aarch64 with + # 64K page size. + # So here as a workaround, cycle mount the SCRATCH_MNT to ensure + # the cache are dropped. + _scratch_cycle_mount
Btw, I'm getting some tests failing because of this change.
For e.g.:
./check btrfs/143
FSTYP -- btrfs
PLATFORM -- Linux/x86_64 debian0 6.4.0-rc6-btrfs-next-134+ #1 SMPPREEMPT_DYNAMIC Thu Jun 15 11:59:28 WEST 2023 MKFS_OPTIONS -- /dev/sdcMOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1
btrfs/143 6s ... [failed, exit status 1]- output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/143.out.bad)
--- tests/btrfs/143.out 2020-06-10 19:29:03.818519162 +0100
+++ /home/fdmanana/git/hub/xfstests/results//btrfs/143.out.bad
2023-06-19 17:04:00.575033899 +0100
@@ -1,37 +1,6 @@
QA output created by 143
wrote 131072/131072 bytes
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa................
-XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
................
-XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
................
-XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
................
...
(Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/btrfs/143.out/home/fdmanana/git/hub/xfstests/results//btrfs/143.out.bad' to see the entire diff)
Ran: btrfs/143
Failures: btrfs/143
Failed 1 of 1 tests
The problem is this test is using dm-rust, and _scratch_cycle_mount() doesn't work in that case.
It should be _unmount_dust() followed by_mount_dust() for this particular case.
Quoted 6 lines
common/btrfs +0
-1while [[ -z $( (( BASHPID % nr_mirrors == mirror )) && exec $XFS_IO_PROG \ -c "pread -b $size $offset $size" $file) ]]; do --2.39.1
Quoted 122 lines · Filipe Manana
Quoted 76 lines · Qu Wenruo
[BUG]
There is a chance that btrfs/266 would fail on aarch64 with 64K page size. (No matter if it's 4K sector size or 64K sector size)The failure indicates that one or more mirrors are not properly fixed.
[CAUSE]
I have added some trace events into the btrfs IO paths, including__btrfs_submit_bio()and__end_bio_extent_readpage().When the test failed, the trace looks like this:
112819.764977:
__btrfs_submit_bio: r/i=5/257 fileoff=0 mirror=1 len=196608 pid=33663
^^^ Initial read on the full 192K file
112819.766604:__btrfs_submit_bio: r/i=5/257 fileoff=0 mirror=2 len=65536 pid=21806
^^^ Repair on the first 64K block
Which would success
112819.766760:__btrfs_submit_bio: r/i=5/257 fileoff=65536 mirror=2 len=65536 pid=21806
^^^ Repair on the second 64K block
Which would fail
112819.767625:__btrfs_submit_bio: r/i=5/257 fileoff=65536 mirror=3 len=65536 pid=21806
^^^ Repair on the third 64K block
Which would success
112819.770999:end_bio_extent_readpage: read finished, r/i=5/257 fileoff=0 len=196608 mirror=1 status=0
^^^ The repair succeeded, the
full 192K read finished.112819.864851:
__btrfs_submit_bio: r/i=5/257 fileoff=0 mirror=3 len=196608 pid=33665 112819.874854:__btrfs_submit_bio: r/i=5/257 fileoff=0 mirror=1 len=65536 pid=31369 112819.875029:__btrfs_submit_bio: r/i=5/257 fileoff=131072 mirror=1 len=65536 pid=31369 112819.876926:end_bio_extent_readpage: read finished, r/i=5/257 fileoff=0 len=196608 mirror=3 status=0But above read only happen for mirror 1 and mirror 3, mirror 2 is not involved.
This means by somehow, the read on mirror 2 didn't happen, mostly due to something wrong during thedrop_cachescall.It may be an async operation or some hardware specific behavior.
On the other hand, for test cases doing the same operation but utilizing direct IO, aka btrfs/267, it never fails as we never populate the page cache thus would always read from the disk.
[WORKAROUND]
The root cause is in the "echo 3 >drop_caches", which I'm still debugging.But at the same time, we can workaround the problem by forcing a cycle mount of scratch device, inside
_btrfs_buffered_read_on_mirror().By this we can ensure all page caches are dropped no matter if
drop_cachesis working correctly.With this patch, I no longer hit the failure on aarch64 with 64K page size anymore, while before this the test case would always fail during a -I 10 run.
Signed-off-by Qu Wenruo <[email protected]>---
RFC:
The root cause is still inside that "echo 3 >drop_caches", but I don't have any better solution if such fundamental debug function is not working as expected.Thus this is only a workaround, before I can pin down the root cause of that
drop_cachehiccup.--- common/btrfs | 5 +++++ 1 file changed, 5 insertions(+)common/btrfs +0
-0common/btrfs _btrfs_buffered_read_on_mirror() · line 606
Quoted 8 lines
common/btrfs +5
-0@@ -599,6 +599,11 @@ _btrfs_buffered_read_on_mirror() local size=$5 echo 3 > /proc/sys/vm/drop_caches + # Above drop_caches doesn't seem to drop every pages on aarch64 with + # 64K page size. + # So here as a workaround, cycle mount the SCRATCH_MNT to ensure + # the cache are dropped. + _scratch_cycle_mountBtw, I'm getting some tests failing because of this change.
For e.g.:
./check btrfs/143
FSTYP -- btrfs
PLATFORM -- Linux/x86_64 debian0 6.4.0-rc6-btrfs-next-134+ #1 SMPPREEMPT_DYNAMICThu Jun 15 11:59:28 WEST 2023MKFS_OPTIONS--/dev/sdcMOUNT_OPTIONS--/dev/sdc/home/fdmanana/btrfs-tests/scratch_1btrfs/143 6s ... [failed, exit status 1]- output mismatch (see
/home/fdmanana/git/hub/xfstests/results//btrfs/143.out.bad)--- tests/btrfs/143.out 2020-06-10 19:29:03.818519162 +0100 +++ /home/fdmanana/git/hub/xfstests/results//btrfs/143.out.bad 2023-06-19 17:04:00.575033899 +0100 @@ -1,37 +1,6 @@ QA output created by 143 wrote 131072/131072 bytes XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa................
-XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
................
-XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
................
-XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
................
...
(Run 'diff -u/home/fdmanana/git/hub/xfstests/tests/btrfs/143.out/home/fdmanana/git/hub/xfstests/results//btrfs/143.out.bad' to see the entire diff)
Ran: btrfs/143
Failures: btrfs/143
Failed 1 of 1 tests
Quoted 3 lines
The problem is this test is using dm-rust, and
_scratch_cycle_mount()doesn't work in that case.
It should be_unmount_dust()followedby_mount_dust()for this particular case.
Any idea on a better solution?
My current idea is to grab the mounted device of SCRATCH_MNT, then unmount and mount the grabbed device, instead of always using scratch device.
But it may look a little over-complicated and would affect too many test cases.
Or maybe we can detect if it's using dust device inside _btrfs_buffered_read_on_mirror() instead?
Thanks,
Qu
Quoted 8 lines
Quoted 8 lines
common/btrfs +0
-1while [[ -z $( (( BASHPID % nr_mirrors == mirror )) && exec $XFS_IO_PROG \ -c "pread -b $size $offset $size" $file) ]]; do --2.39.1
Quoted 130 lines · Qu Wenruo
Quoted 122 lines · Filipe Manana
Quoted 76 lines · Qu Wenruo
[BUG]
There is a chance that btrfs/266 would fail on aarch64 with 64K page size. (No matter if it's 4K sector size or 64K sector size)The failure indicates that one or more mirrors are not properly fixed.
[CAUSE]
I have added some trace events into the btrfs IO paths, including__btrfs_submit_bio()and__end_bio_extent_readpage().When the test failed, the trace looks like this:
112819.764977:
__btrfs_submit_bio: r/i=5/257 fileoff=0 mirror=1 len=196608 pid=33663
^^^ Initial read on the full 192K file
112819.766604:__btrfs_submit_bio: r/i=5/257 fileoff=0 mirror=2 len=65536 pid=21806
^^^ Repair on the first 64K block
Which would success
112819.766760:__btrfs_submit_bio: r/i=5/257 fileoff=65536 mirror=2 len=65536 pid=21806
^^^ Repair on the second 64K block
Which would fail
112819.767625:__btrfs_submit_bio: r/i=5/257 fileoff=65536 mirror=3 len=65536 pid=21806
^^^ Repair on the third 64K block
Which would success
112819.770999:end_bio_extent_readpage: read finished, r/i=5/257 fileoff=0 len=196608 mirror=1 status=0
^^^ The repair succeeded, the
full 192K read finished.112819.864851:
__btrfs_submit_bio: r/i=5/257 fileoff=0 mirror=3 len=196608 pid=33665 112819.874854:__btrfs_submit_bio: r/i=5/257 fileoff=0 mirror=1 len=65536 pid=31369 112819.875029:__btrfs_submit_bio: r/i=5/257 fileoff=131072 mirror=1 len=65536 pid=31369 112819.876926:end_bio_extent_readpage: read finished, r/i=5/257 fileoff=0 len=196608 mirror=3 status=0But above read only happen for mirror 1 and mirror 3, mirror 2 is not involved.
This means by somehow, the read on mirror 2 didn't happen, mostly due to something wrong during thedrop_cachescall.It may be an async operation or some hardware specific behavior.
On the other hand, for test cases doing the same operation but utilizing direct IO, aka btrfs/267, it never fails as we never populate the page cache thus would always read from the disk.
[WORKAROUND]
The root cause is in the "echo 3 >drop_caches", which I'm still debugging.But at the same time, we can workaround the problem by forcing a cycle mount of scratch device, inside
_btrfs_buffered_read_on_mirror().By this we can ensure all page caches are dropped no matter if
drop_cachesis working correctly.With this patch, I no longer hit the failure on aarch64 with 64K page size anymore, while before this the test case would always fail during a -I 10 run.
Signed-off-by Qu Wenruo <[email protected]>---
RFC:
The root cause is still inside that "echo 3 >drop_caches", but I don't have any better solution if such fundamental debug function is not working as expected.Thus this is only a workaround, before I can pin down the root cause of that
drop_cachehiccup.--- common/btrfs | 5 +++++ 1 file changed, 5 insertions(+)common/btrfs +0
-0common/btrfs _btrfs_buffered_read_on_mirror() · line 606
Quoted 8 lines
common/btrfs +5
-0@@ -599,6 +599,11 @@ _btrfs_buffered_read_on_mirror() local size=$5 echo 3 > /proc/sys/vm/drop_caches + # Above drop_caches doesn't seem to drop every pages on aarch64 with + # 64K page size. + # So here as a workaround, cycle mount the SCRATCH_MNT to ensure + # the cache are dropped. + _scratch_cycle_mountBtw, I'm getting some tests failing because of this change.
For e.g.:
./check btrfs/143
FSTYP -- btrfs
PLATFORM -- Linux/x86_64 debian0 6.4.0-rc6-btrfs-next-134+ #1 SMPPREEMPT_DYNAMICThu Jun 15 11:59:28 WEST 2023MKFS_OPTIONS--/dev/sdcMOUNT_OPTIONS--/dev/sdc/home/fdmanana/btrfs-tests/scratch_1btrfs/143 6s ... [failed, exit status 1]- output mismatch (see
/home/fdmanana/git/hub/xfstests/results//btrfs/143.out.bad)--- tests/btrfs/143.out 2020-06-10 19:29:03.818519162 +0100 +++ /home/fdmanana/git/hub/xfstests/results//btrfs/143.out.bad 2023-06-19 17:04:00.575033899 +0100 @@ -1,37 +1,6 @@ QA output created by 143 wrote 131072/131072 bytes XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa................
-XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
................
-XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
................
-XXXXXXXX: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
................
...
(Run 'diff -u/home/fdmanana/git/hub/xfstests/tests/btrfs/143.out/home/fdmanana/git/hub/xfstests/results//btrfs/143.out.bad' to see the entire diff)
Ran: btrfs/143
Failures: btrfs/143
Failed 1 of 1 testsQuoted 3 lines
The problem is this test is using dm-rust, and
_scratch_cycle_mount()doesn't work in that case.
It should be_unmount_dust()followedby_mount_dust()for this particular case.
Quoted 5 lines
Any idea on a better solution?
My current idea is to grab the mounted device of
SCRATCH_MNT, then unmount and mount the grabbed device, instead of always using scratch device.
Maybe that, yes.
Quoted 6 lines
But it may look a little over-complicated and would affect too many test cases.
Or maybe we can detect if it's using dust device inside
_btrfs_buffered_read_on_mirror()instead?
Well, that sounds fragile. Maybe there are other tests using dmflakey instead of dmrust, or some other target.
Or maybe not now, but in the future...
Quoted 11 lines
Thanks,
QuQuoted 8 lines
Quoted 8 lines
common/btrfs +0
-1while [[ -z $( (( BASHPID % nr_mirrors == mirror )) && exec $XFS_IO_PROG \ -c "pread -b $size $offset $size" $file) ]]; do --2.39.1