Skip to contentSkip to conversation

remoteproc: stm32: use correct format strings on 64-bit

PATCH In review Arnd Bergmann 5 participants 6 messages Jun 9, 2023 – Jun 15, 2023

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 remoteproc: stm32: use correct format strings on 64-bit

From: Arnd Bergmann <[email protected]>

With CONFIG_ARCH_STM32 making it into arch/arm64, a couple of format strings no longer work, since they rely on size_t being compatible with %x, or they print an 'int' using %z:

drivers/remoteproc/stm32_rproc.c: In function 'stm32_rproc_mem_alloc':
drivers/remoteproc/stm32_rproc.c:122:22: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'size_t' {aka 'long unsigned int'} [-Werror=format=] drivers/remoteproc/stm32_rproc.c:122:40: note: format string is defined here

  122 |         dev_dbg(dev, "map memory: %pa+%x\n", &mem->dma, mem->len);
      |                                       ~^
      |                                        |
      |                                        unsigned int
      |                                       %lx
drivers/remoteproc/stm32_rproc.c:125:30: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Werror=format=]
drivers/remoteproc/stm32_rproc.c:125:65: note: format string is defined here
  125 |                 dev_err(dev, "Unable to map memory region: %pa+%x\n",
      |                                                                ~^
      |                                                                 |
      |                                                                 unsigned int
      |                                                                %lx
drivers/remoteproc/stm32_rproc.c: In function 'stm32_rproc_get_loaded_rsc_table':
drivers/remoteproc/stm32_rproc.c:646:30: error: format '%zx' expects argument of type 'size_t', but argument 4 has type 'int' [-Werror=format=]
drivers/remoteproc/stm32_rproc.c:646:66: note: format string is defined here
  646 |                 dev_err(dev, "Unable to map memory region: %pa+%zx\n",
      |                                                                ~~^
      |                                                                  |
      |                                                                  long unsigned int
      |                                                                %x

Fix up all three instances to work across architectures, and enable compile testing for this driver to ensure it builds everywhere.

---
 drivers/remoteproc/Kconfig       | 2 +-
 drivers/remoteproc/stm32_rproc.c | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)
drivers/remoteproc/Kconfig +1 -1
index a850e9f486dd6..48845dc8fa852 100644
@@ -313,7 +313,7 @@ config ST_SLIM_REMOTEPROC
 
 config STM32_RPROC
 	tristate "STM32 remoteproc support"
-	depends on ARCH_STM32
+	depends on ARCH_STM32 || COMPILE_TEST
 	depends on REMOTEPROC
 	select MAILBOX
 	help
drivers/remoteproc/stm32_rproc.c +3 -3
index a7457777aae43..cf073bac79f73 100644
@@ -119,10 +119,10 @@ static int stm32_rproc_mem_alloc(struct rproc *rproc,
 	struct device *dev = rproc->dev.parent;
 	void *va;
 
-	dev_dbg(dev, "map memory: %pa+%x\n", &mem->dma, mem->len);
+	dev_dbg(dev, "map memory: %pad+%zx\n", &mem->dma, mem->len);
 	va = ioremap_wc(mem->dma, mem->len);
 	if (IS_ERR_OR_NULL(va)) {
-		dev_err(dev, "Unable to map memory region: %pa+%x\n",
+		dev_err(dev, "Unable to map memory region: %pad+0x%zx\n",
 			&mem->dma, mem->len);
 		return -ENOMEM;
 	}
@@ -643,7 +643,7 @@ stm32_rproc_get_loaded_rsc_table(struct rproc *rproc, size_t *table_sz)
 
 	ddata->rsc_va = devm_ioremap_wc(dev, rsc_pa, RSC_TBL_SIZE);
 	if (IS_ERR_OR_NULL(ddata->rsc_va)) {
-		dev_err(dev, "Unable to map memory region: %pa+%zx\n",
+		dev_err(dev, "Unable to map memory region: %pa+%x\n",
 			&rsc_pa, RSC_TBL_SIZE);
 		ddata->rsc_va = NULL;
 		return ERR_PTR(-ENOMEM);
Signature · 1 line
2.39.2
Reviewed-by on v1 1/1
#1 lore raw

Hi Arnd

Quoted 30 lines · Arnd Bergmann

From: Arnd Bergmann <[email protected]>

With CONFIG_ARCH_STM32 making it into arch/arm64, a couple of format strings no longer work, since they rely on size_t being compatible with %x, or they print an 'int' using %z:

drivers/remoteproc/stm32_rproc.c: In function 'stm32_rproc_mem_alloc':
drivers/remoteproc/stm32_rproc.c:122:22: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'size_t' {aka 'long unsigned int'} [-Werror=format=] drivers/remoteproc/stm32_rproc.c:122:40: note: format string is defined here

  122 |         dev_dbg(dev, "map memory: %pa+%x\n", &mem->dma, mem->len);
      |                                       ~^
      |                                        |
      |                                        unsigned int
      |                                       %lx
drivers/remoteproc/stm32_rproc.c:125:30: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Werror=format=]
drivers/remoteproc/stm32_rproc.c:125:65: note: format string is defined here
  125 |                 dev_err(dev, "Unable to map memory region: %pa+%x\n",
      |                                                                ~^
      |                                                                 |
      |                                                                 unsigned int
      |                                                                %lx
drivers/remoteproc/stm32_rproc.c: In function 'stm32_rproc_get_loaded_rsc_table':
drivers/remoteproc/stm32_rproc.c:646:30: error: format '%zx' expects argument of type 'size_t', but argument 4 has type 'int' [-Werror=format=]
drivers/remoteproc/stm32_rproc.c:646:66: note: format string is defined here
  646 |                 dev_err(dev, "Unable to map memory region: %pa+%zx\n",
      |                                                                ~~^
      |                                                                  |
      |                                                                  long unsigned int
      |                                                                %x
Quoted 4 lines

Fix up all three instances to work across architectures, and enable compile testing for this driver to ensure it builds everywhere.

I also have it for the stm32mp2 :)

Please find a remark below , with or without that

Quoted 36 lines
---
 drivers/remoteproc/Kconfig       | 2 +-
 drivers/remoteproc/stm32_rproc.c | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)
drivers/remoteproc/Kconfig +1 -1
index a850e9f486dd6..48845dc8fa852 100644
@@ -313,7 +313,7 @@ config ST_SLIM_REMOTEPROC
 
 config STM32_RPROC
 	tristate "STM32 remoteproc support"
-	depends on ARCH_STM32
+	depends on ARCH_STM32 || COMPILE_TEST
 	depends on REMOTEPROC
 	select MAILBOX
 	help
drivers/remoteproc/stm32_rproc.c +2 -2
index a7457777aae43..cf073bac79f73 100644
@@ -119,10 +119,10 @@ static int stm32_rproc_mem_alloc(struct rproc *rproc,
 	struct device *dev = rproc->dev.parent;
 	void *va;
 
-	dev_dbg(dev, "map memory: %pa+%x\n", &mem->dma, mem->len);
+	dev_dbg(dev, "map memory: %pad+%zx\n", &mem->dma, mem->len);
 	va = ioremap_wc(mem->dma, mem->len);
 	if (IS_ERR_OR_NULL(va)) {
-		dev_err(dev, "Unable to map memory region: %pa+%x\n",
+		dev_err(dev, "Unable to map memory region: %pad+0x%zx\n",
 			&mem->dma, mem->len);
 		return -ENOMEM;
 	}

drivers/remoteproc/stm32_rproc.c stm32_rproc_get_loaded_rsc_table(struct rproc *rproc, size_t *table_sz) · line 647

Quoted 6 lines
drivers/remoteproc/stm32_rproc.c +1 -1
@@ -643,7 +643,7 @@ stm32_rproc_get_loaded_rsc_table(struct rproc *rproc, size_t *table_sz)
 
 	ddata->rsc_va = devm_ioremap_wc(dev, rsc_pa, RSC_TBL_SIZE);
 	if (IS_ERR_OR_NULL(ddata->rsc_va)) {
-		dev_err(dev, "Unable to map memory region: %pa+%zx\n",
+		dev_err(dev, "Unable to map memory region: %pa+%x\n",
 			&rsc_pa, RSC_TBL_SIZE);

What about cast the RSC_TBL_SIZE define instead to ensure to be independent from the arch and to match with the use of RSC_TBL_SIZE?

#define RSC_TBL_SIZE ((size_t)1024)

Thanks,
Arnaud

Quoted 2 lines
drivers/remoteproc/stm32_rproc.c +0 -0
 		ddata->rsc_va = NULL;
 		return ERR_PTR(-ENOMEM);
#2 lore raw
Quoted 10 lines · Arnaud POULIQUEN

drivers/remoteproc/stm32_rproc.c stm32_rproc_get_loaded_rsc_table(struct rproc *rproc, size_t *table_sz) · line 647

Quoted 5 lines
drivers/remoteproc/stm32_rproc.c +1 -1
 	ddata->rsc_va = devm_ioremap_wc(dev, rsc_pa, RSC_TBL_SIZE);
 	if (IS_ERR_OR_NULL(ddata->rsc_va)) {
-		dev_err(dev, "Unable to map memory region: %pa+%zx\n",
+		dev_err(dev, "Unable to map memory region: %pa+%x\n",
 			&rsc_pa, RSC_TBL_SIZE);

What about cast the RSC_TBL_SIZE define instead to ensure to be independent from the arch and to match with the use of RSC_TBL_SIZE?

#define RSC_TBL_SIZE ((size_t)1024)

I have no objection to that, but I don't see it doing anything good either, as this is a constant value that will always work.

Arnd

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#3 lore raw
Quoted 11 lines · Arnd Bergmann
Quoted 9 lines · Arnaud POULIQUEN

drivers/remoteproc/stm32_rproc.c stm32_rproc_get_loaded_rsc_table(struct rproc *rproc, size_t *table_sz) · line 647

Quoted 5 lines
drivers/remoteproc/stm32_rproc.c +1 -1
 	ddata->rsc_va = devm_ioremap_wc(dev, rsc_pa, RSC_TBL_SIZE);
 	if (IS_ERR_OR_NULL(ddata->rsc_va)) {
-		dev_err(dev, "Unable to map memory region: %pa+%zx\n",
+		dev_err(dev, "Unable to map memory region: %pa+%x\n",
 			&rsc_pa, RSC_TBL_SIZE);

What about cast the RSC_TBL_SIZE define instead to ensure to be independent from the arch and to match with the use of RSC_TBL_SIZE?

Quoted 6 lines
Quoted 1 line

#define RSC_TBL_SIZE ((size_t)1024)

I have no objection to that, but I don't see it doing anything good either, as this is a constant value that will always work.

Arnd

It was just to avoid to have the constant used with different types in the code But that's nitpicking, let's keep your proposal.

Thanks,
Arnaud

maintainer
#4 lore raw
In reply to Arnd Bergmann

Hi Arnd

Quoted 11 lines · Arnd Bergmann
Quoted 9 lines · Arnaud POULIQUEN

drivers/remoteproc/stm32_rproc.c stm32_rproc_get_loaded_rsc_table(struct rproc *rproc, size_t *table_sz) · line 647

Quoted 5 lines
  	ddata->rsc_va = devm_ioremap_wc(dev, rsc_pa, RSC_TBL_SIZE);
  	if (IS_ERR_OR_NULL(ddata->rsc_va)) {
drivers/remoteproc/stm32_rproc.c +1 -1
-		dev_err(dev, "Unable to map memory region: %pa+%zx\n",
+		dev_err(dev, "Unable to map memory region: %pa+%x\n",
  			&rsc_pa, RSC_TBL_SIZE);

What about cast the RSC_TBL_SIZE define instead to ensure to be independent from the arch and to match with the use of RSC_TBL_SIZE?

Quoted 6 lines
Quoted 1 line

#define RSC_TBL_SIZE ((size_t)1024)

I have no objection to that, but I don't see it doing anything good either, as this is a constant value that will always work.

Arnd

The kernel robot shot me for my STM32MP25 PR due to this issue. Do I have to resend something ?

Thanks
Alex

Acked-by Tested-by on v1 1/1
#5 lore raw
In reply to Arnd Bergmann
Quoted 30 lines · Arnd Bergmann

From: Arnd Bergmann <[email protected]>

With CONFIG_ARCH_STM32 making it into arch/arm64, a couple of format strings no longer work, since they rely on size_t being compatible with %x, or they print an 'int' using %z:

drivers/remoteproc/stm32_rproc.c: In function 'stm32_rproc_mem_alloc':
drivers/remoteproc/stm32_rproc.c:122:22: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'size_t' {aka 'long unsigned int'} [-Werror=format=] drivers/remoteproc/stm32_rproc.c:122:40: note: format string is defined here

  122 |         dev_dbg(dev, "map memory: %pa+%x\n", &mem->dma, mem->len);
      |                                       ~^
      |                                        |
      |                                        unsigned int
      |                                       %lx
drivers/remoteproc/stm32_rproc.c:125:30: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Werror=format=]
drivers/remoteproc/stm32_rproc.c:125:65: note: format string is defined here
  125 |                 dev_err(dev, "Unable to map memory region: %pa+%x\n",
      |                                                                ~^
      |                                                                 |
      |                                                                 unsigned int
      |                                                                %lx
drivers/remoteproc/stm32_rproc.c: In function 'stm32_rproc_get_loaded_rsc_table':
drivers/remoteproc/stm32_rproc.c:646:30: error: format '%zx' expects argument of type 'size_t', but argument 4 has type 'int' [-Werror=format=]
drivers/remoteproc/stm32_rproc.c:646:66: note: format string is defined here
  646 |                 dev_err(dev, "Unable to map memory region: %pa+%zx\n",
      |                                                                ~~^
      |                                                                  |
      |                                                                  long unsigned int
      |                                                                %x
Quoted 4 lines

Fix up all three instances to work across architectures, and enable compile testing for this driver to ensure it builds everywhere.

Thanks.

Quoted 44 lines
---
 drivers/remoteproc/Kconfig       | 2 +-
 drivers/remoteproc/stm32_rproc.c | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)
drivers/remoteproc/Kconfig +1 -1
index a850e9f486dd6..48845dc8fa852 100644
@@ -313,7 +313,7 @@ config ST_SLIM_REMOTEPROC
 
 config STM32_RPROC
 	tristate "STM32 remoteproc support"
-	depends on ARCH_STM32
+	depends on ARCH_STM32 || COMPILE_TEST
 	depends on REMOTEPROC
 	select MAILBOX
 	help
drivers/remoteproc/stm32_rproc.c +3 -3
index a7457777aae43..cf073bac79f73 100644
@@ -119,10 +119,10 @@ static int stm32_rproc_mem_alloc(struct rproc *rproc,
 	struct device *dev = rproc->dev.parent;
 	void *va;
 
-	dev_dbg(dev, "map memory: %pa+%x\n", &mem->dma, mem->len);
+	dev_dbg(dev, "map memory: %pad+%zx\n", &mem->dma, mem->len);
 	va = ioremap_wc(mem->dma, mem->len);
 	if (IS_ERR_OR_NULL(va)) {
-		dev_err(dev, "Unable to map memory region: %pa+%x\n",
+		dev_err(dev, "Unable to map memory region: %pad+0x%zx\n",
 			&mem->dma, mem->len);
 		return -ENOMEM;
 	}
@@ -643,7 +643,7 @@ stm32_rproc_get_loaded_rsc_table(struct rproc *rproc, size_t *table_sz)
 
 	ddata->rsc_va = devm_ioremap_wc(dev, rsc_pa, RSC_TBL_SIZE);
 	if (IS_ERR_OR_NULL(ddata->rsc_va)) {
-		dev_err(dev, "Unable to map memory region: %pa+%zx\n",
+		dev_err(dev, "Unable to map memory region: %pa+%x\n",
 			&rsc_pa, RSC_TBL_SIZE);
 		ddata->rsc_va = NULL;
 		return ERR_PTR(-ENOMEM);
Signature · 1 line
~Randy