Skip to contentSkip to conversation

powerpc: dts: turris1x.dts: Fix PCIe MEM size for pci2 node

PATCH Applied Pali Rohár 2 participants 4 messages May 5, 2023 – Jul 3, 2023

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 powerpc: dts: turris1x.dts: Fix PCIe MEM size for pci2 node

Freescale PCIe controllers on their PCIe Root Ports do not have any mappable PCI BAR allocate from PCIe MEM.

Information about 1MB window on BAR0 of PCIe Root Port was misleading because Freescale PCIe controllers have at BAR0 position different register PEXCSRBAR, and kernel correctly skipts BAR0 for these Freescale PCIe Root Ports.

So update comment about P2020 PCIe Root Port and decrease PCIe MEM size required for PCIe controller (pci2 node) on which is on-board xHCI controller.

lspci confirms that on P2020 PCIe Root Port is no PCI BAR and /proc/iomem sees that only c0000000-c000ffff and c0010000-c0011fff ranges are used.

Fixes 54c15ec3b738 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers")
---
 arch/powerpc/boot/dts/turris1x.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/powerpc/boot/dts/turris1x.dts +3 -3
index 6612160c19d5..dff1ea074d9d 100644
@@ -476,12 +476,12 @@
 		 * channel 1 (but only USB 2.0 subset) to USB 2.0 pins on mPCIe
 		 * slot 1 (CN5), channels 2 and 3 to connector P600.
 		 *
-		 * P2020 PCIe Root Port uses 1MB of PCIe MEM and xHCI controller
+		 * P2020 PCIe Root Port does not use PCIe MEM and xHCI controller
 		 * uses 64kB + 8kB of PCIe MEM. No PCIe IO is used or required.
-		 * So allocate 2MB of PCIe MEM for this PCIe bus.
+		 * So allocate 128kB of PCIe MEM for this PCIe bus.
 		 */
 		reg = <0 0xffe08000 0 0x1000>;
-		ranges = <0x02000000 0x0 0xc0000000 0 0xc0000000 0x0 0x00200000>, /* MEM */
+		ranges = <0x02000000 0x0 0xc0000000 0 0xc0000000 0x0 0x00020000>, /* MEM */
 			 <0x01000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>; /* IO */
 
 		pcie@0 {
Signature · 1 line
2.20.1
#1 lore raw
Quoted 44 lines · On Friday 05 May 2023 19:28:18 Pali Rohár wrote:

Freescale PCIe controllers on their PCIe Root Ports do not have any mappable PCI BAR allocate from PCIe MEM.

Information about 1MB window on BAR0 of PCIe Root Port was misleading because Freescale PCIe controllers have at BAR0 position different register PEXCSRBAR, and kernel correctly skipts BAR0 for these Freescale PCIe Root Ports.

So update comment about P2020 PCIe Root Port and decrease PCIe MEM size required for PCIe controller (pci2 node) on which is on-board xHCI controller.

lspci confirms that on P2020 PCIe Root Port is no PCI BAR and /proc/iomem sees that only c0000000-c000ffff and c0010000-c0011fff ranges are used.

Fixes 54c15ec3b738 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers")
---
 arch/powerpc/boot/dts/turris1x.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/powerpc/boot/dts/turris1x.dts +3 -3
index 6612160c19d5..dff1ea074d9d 100644
@@ -476,12 +476,12 @@
 		 * channel 1 (but only USB 2.0 subset) to USB 2.0 pins on mPCIe
 		 * slot 1 (CN5), channels 2 and 3 to connector P600.
 		 *
-		 * P2020 PCIe Root Port uses 1MB of PCIe MEM and xHCI controller
+		 * P2020 PCIe Root Port does not use PCIe MEM and xHCI controller
 		 * uses 64kB + 8kB of PCIe MEM. No PCIe IO is used or required.
-		 * So allocate 2MB of PCIe MEM for this PCIe bus.
+		 * So allocate 128kB of PCIe MEM for this PCIe bus.
 		 */
 		reg = <0 0xffe08000 0 0x1000>;
-		ranges = <0x02000000 0x0 0xc0000000 0 0xc0000000 0x0 0x00200000>, /* MEM */
+		ranges = <0x02000000 0x0 0xc0000000 0 0xc0000000 0x0 0x00020000>, /* MEM */
 			 <0x01000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>; /* IO */
 
 		pcie@0 {
Signature · 1 line
2.20.1

PING?

#2 lore raw
Quoted 41 lines · On Saturday 10 June 2023 09:35:21 Pali Rohár wrote:
Quoted 40 lines · On Friday 05 May 2023 19:28:18 Pali Rohár wrote:

Freescale PCIe controllers on their PCIe Root Ports do not have any mappable PCI BAR allocate from PCIe MEM.

Information about 1MB window on BAR0 of PCIe Root Port was misleading because Freescale PCIe controllers have at BAR0 position different register PEXCSRBAR, and kernel correctly skipts BAR0 for these Freescale PCIe Root Ports.

So update comment about P2020 PCIe Root Port and decrease PCIe MEM size required for PCIe controller (pci2 node) on which is on-board xHCI controller.

lspci confirms that on P2020 PCIe Root Port is no PCI BAR and /proc/iomem sees that only c0000000-c000ffff and c0010000-c0011fff ranges are used.

Fixes 54c15ec3b738 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers")
---
 arch/powerpc/boot/dts/turris1x.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/powerpc/boot/dts/turris1x.dts +3 -3
index 6612160c19d5..dff1ea074d9d 100644
@@ -476,12 +476,12 @@
 		 * channel 1 (but only USB 2.0 subset) to USB 2.0 pins on mPCIe
 		 * slot 1 (CN5), channels 2 and 3 to connector P600.
 		 *
-		 * P2020 PCIe Root Port uses 1MB of PCIe MEM and xHCI controller
+		 * P2020 PCIe Root Port does not use PCIe MEM and xHCI controller
 		 * uses 64kB + 8kB of PCIe MEM. No PCIe IO is used or required.
-		 * So allocate 2MB of PCIe MEM for this PCIe bus.
+		 * So allocate 128kB of PCIe MEM for this PCIe bus.
 		 */
 		reg = <0 0xffe08000 0 0x1000>;
-		ranges = <0x02000000 0x0 0xc0000000 0 0xc0000000 0x0 0x00200000>, /* MEM */
+		ranges = <0x02000000 0x0 0xc0000000 0 0xc0000000 0x0 0x00020000>, /* MEM */
 			 <0x01000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>; /* IO */
 
Quoted 6 lines
Quoted 4 lines
arch/powerpc/boot/dts/turris1x.dts +0 -0
 		pcie@0 {
Signature · 1 line
2.20.1

PING?

PING?

reviewer Applied
#3 lore raw
In reply to Pali Rohár
Quoted 9 lines · Pali Rohár

Freescale PCIe controllers on their PCIe Root Ports do not have any mappable PCI BAR allocate from PCIe MEM.

Information about 1MB window on BAR0 of PCIe Root Port was misleading because Freescale PCIe controllers have at BAR0 position different register PEXCSRBAR, and kernel correctly skipts BAR0 for these Freescale PCIe Root Ports.

[...]

Applied to powerpc/next.

[1/1] powerpc: dts: turris1x.dts: Fix PCIe MEM size for pci2 node

      https://git.kernel.org/powerpc/c/abaa02fc944f2f9f2c2e1925ddaceaf35c48528c

cheers