Skip to contentSkip to conversation

sandbox: fix a compilation error

PATCH In review Sergei Antonov 3 participants 7 messages Jun 12, 2023 – Jul 23, 2023

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 sandbox: fix a compilation error

With sandbox and sandbox64 configurations:

In file included from .../u-boot/include/test/test.h:156,

                 from .../u-boot/include/test/lib.h:9,
                 from .../u-boot/test/lib/test_crc8.c:8:
.../u-boot/arch/sandbox/include/asm/test.h: In function ‘sandbox_sdl_set_bpp’:
.../u-boot/arch/sandbox/include/asm/test.h:323:17: error: ‘ENOSYS’ undeclared (first use in this function)
  323 |         return -ENOSYS;
      |                 ^~~~~~

Per Tom Rini's suggestion:
move that function prototype over to arch/sandbox/include/asm/sdl.h and make test/dm/video.c include <asm/sdl.h>

---

v2:
* move the function to another file instead of including <errno.h>

 arch/sandbox/include/asm/sdl.h  | 23 +++++++++++++++++++++++
 arch/sandbox/include/asm/test.h | 25 -------------------------
 test/dm/video.c                 |  1 +
 3 files changed, 24 insertions(+), 25 deletions(-)
arch/sandbox/include/asm/sdl.h +23 -0
index 56dcb84803d3..ee4991f7c24a 100644
@@ -7,6 +7,7 @@
 #define __SANDBOX_SDL_H
 
 #include <errno.h>
+#include <video.h>
 
 #ifdef CONFIG_SANDBOX_SDL
 
@@ -87,6 +88,22 @@ int sandbox_sdl_sound_stop(void);
  */
 int sandbox_sdl_sound_init(int rate, int channels);
 
+/**
+ * sandbox_sdl_set_bpp() - Set the depth of the sandbox display
+ *
+ * The device must not be active when this function is called. It activiates it
+ * before returning.
+ *
+ * This updates the depth value and adjusts a few other settings accordingly.
+ * It must be called before the display is probed.
+ *
+ * @dev: Device to adjust
+ * @l2bpp: depth to set
+ * Return: 0 if the device was already active, other error if it fails to probe
+ * after the change
+ */
+int sandbox_sdl_set_bpp(struct udevice *dev, enum video_log2_bpp l2bpp);
+
 #else
 static inline int sandbox_sdl_init_display(int width, int height, int log2_bpp,
 					   bool double_size)
@@ -134,6 +151,12 @@ static inline int sandbox_sdl_sound_init(int rate, int channels)
 	return -ENODEV;
 }
 
+static inline int sandbox_sdl_set_bpp(struct udevice *dev,
+				      enum video_log2_bpp l2bpp)
+{
+	return -ENOSYS;
+}
+
 #endif
 
 #endif
arch/sandbox/include/asm/test.h +0 -25
index e482271fe975..17159f8d674a 100644
@@ -8,7 +8,6 @@
 #ifndef __ASM_TEST_H
 #define __ASM_TEST_H
 
-#include <video.h>
 #include <pci_ids.h>
 
 struct unit_test_state;
@@ -300,30 +299,6 @@ void sandbox_cros_ec_set_test_flags(struct udevice *dev, uint flags);
  */
 int sandbox_cros_ec_get_pwm_duty(struct udevice *dev, uint index, uint *duty);
 
-#if IS_ENABLED(CONFIG_SANDBOX_SDL)
-/**
- * sandbox_sdl_set_bpp() - Set the depth of the sandbox display
- *
- * The device must not be active when this function is called. It activiates it
- * before returning.
- *
- * This updates the depth value and adjusts a few other settings accordingly.
- * It must be called before the display is probed.
- *
- * @dev: Device to adjust
- * @l2bpp: depth to set
- * Return: 0 if the device was already active, other error if it fails to probe
- * after the change
- */
-int sandbox_sdl_set_bpp(struct udevice *dev, enum video_log2_bpp l2bpp);
-#else
-static inline int sandbox_sdl_set_bpp(struct udevice *dev,
-				      enum video_log2_bpp l2bpp)
-{
-	return -ENOSYS;
-}
-#endif
-
 /**
  * sandbox_set_fake_efi_mgr_dev() - Control EFI bootmgr producing valid bootflow
  *
test/dm/video.c +1 -0
index 30778157d940..1c63d16bd28b 100644
@@ -15,6 +15,7 @@
 #include <video.h>
 #include <video_console.h>
 #include <asm/test.h>
+#include <asm/sdl.h>
 #include <dm/test.h>
 #include <dm/uclass-internal.h>
 #include <test/test.h>
Signature · 1 line
2.37.2
#1 lore raw

Hi Sergei,

Quoted 124 lines · Sergei Antonov

With sandbox and sandbox64 configurations:

In file included from .../u-boot/include/test/test.h:156,

                 from .../u-boot/include/test/lib.h:9,
                 from .../u-boot/test/lib/test_crc8.c:8:
.../u-boot/arch/sandbox/include/asm/test.h: In function ‘sandbox_sdl_set_bpp’:
.../u-boot/arch/sandbox/include/asm/test.h:323:17: error: ‘ENOSYS’ undeclared (first use in this function)
  323 |         return -ENOSYS;
      |                 ^~~~~~

Per Tom Rini's suggestion:
move that function prototype over to arch/sandbox/include/asm/sdl.h and make test/dm/video.c include <asm/sdl.h>

---

v2:
* move the function to another file instead of including <errno.h>

 arch/sandbox/include/asm/sdl.h  | 23 +++++++++++++++++++++++
 arch/sandbox/include/asm/test.h | 25 -------------------------
 test/dm/video.c                 |  1 +
 3 files changed, 24 insertions(+), 25 deletions(-)
arch/sandbox/include/asm/sdl.h +23 -0
index 56dcb84803d3..ee4991f7c24a 100644
@@ -7,6 +7,7 @@
 #define __SANDBOX_SDL_H
 
 #include <errno.h>
+#include <video.h>
 
 #ifdef CONFIG_SANDBOX_SDL
 
@@ -87,6 +88,22 @@ int sandbox_sdl_sound_stop(void);
  */
 int sandbox_sdl_sound_init(int rate, int channels);
 
+/**
+ * sandbox_sdl_set_bpp() - Set the depth of the sandbox display
+ *
+ * The device must not be active when this function is called. It activiates it
+ * before returning.
+ *
+ * This updates the depth value and adjusts a few other settings accordingly.
+ * It must be called before the display is probed.
+ *
+ * @dev: Device to adjust
+ * @l2bpp: depth to set
+ * Return: 0 if the device was already active, other error if it fails to probe
+ * after the change
+ */
+int sandbox_sdl_set_bpp(struct udevice *dev, enum video_log2_bpp l2bpp);
+
 #else
 static inline int sandbox_sdl_init_display(int width, int height, int log2_bpp,
                                           bool double_size)
@@ -134,6 +151,12 @@ static inline int sandbox_sdl_sound_init(int rate, int channels)
        return -ENODEV;
 }
 
+static inline int sandbox_sdl_set_bpp(struct udevice *dev,
+                                     enum video_log2_bpp l2bpp)
+{
+       return -ENOSYS;
+}
+
 #endif
 
 #endif
arch/sandbox/include/asm/test.h +0 -25
index e482271fe975..17159f8d674a 100644
@@ -8,7 +8,6 @@
 #ifndef __ASM_TEST_H
 #define __ASM_TEST_H
 
-#include <video.h>
 #include <pci_ids.h>
 
 struct unit_test_state;
@@ -300,30 +299,6 @@ void sandbox_cros_ec_set_test_flags(struct udevice *dev, uint flags);
  */
 int sandbox_cros_ec_get_pwm_duty(struct udevice *dev, uint index, uint *duty);
 
-#if IS_ENABLED(CONFIG_SANDBOX_SDL)
-/**
- * sandbox_sdl_set_bpp() - Set the depth of the sandbox display
- *
- * The device must not be active when this function is called. It activiates it
- * before returning.
- *
- * This updates the depth value and adjusts a few other settings accordingly.
- * It must be called before the display is probed.
- *
- * @dev: Device to adjust
- * @l2bpp: depth to set
- * Return: 0 if the device was already active, other error if it fails to probe
- * after the change
- */
-int sandbox_sdl_set_bpp(struct udevice *dev, enum video_log2_bpp l2bpp);
-#else
-static inline int sandbox_sdl_set_bpp(struct udevice *dev,
-                                     enum video_log2_bpp l2bpp)
-{
-       return -ENOSYS;
-}
-#endif
-
 /**
  * sandbox_set_fake_efi_mgr_dev() - Control EFI bootmgr producing valid bootflow
  *
test/dm/video.c +0 -0
index 30778157d940..1c63d16bd28b 100644

test/dm/video.c line 18

Quoted 4 lines
test/dm/video.c +1 -0
@@ -15,6 +15,7 @@
 #include <video.h>
 #include <video_console.h>
 #include <asm/test.h>
+#include <asm/sdl.h>

The problem with this is it then cannot be built on non-sandbox boards. I think v1 was OK.

Quoted 6 lines
test/dm/video.c +0 -1
 #include <dm/test.h>
 #include <dm/uclass-internal.h>
 #include <test/test.h>
--

2.37.2

Regards,
Simon

#2 lore raw
Quoted 126 lines · Simon Glass

Hi Sergei,

Quoted 123 lines · Sergei Antonov

With sandbox and sandbox64 configurations:

In file included from .../u-boot/include/test/test.h:156,

                 from .../u-boot/include/test/lib.h:9,
                 from .../u-boot/test/lib/test_crc8.c:8:
.../u-boot/arch/sandbox/include/asm/test.h: In function ‘sandbox_sdl_set_bpp’:
.../u-boot/arch/sandbox/include/asm/test.h:323:17: error: ‘ENOSYS’ undeclared (first use in this function)
  323 |         return -ENOSYS;
      |                 ^~~~~~

Per Tom Rini's suggestion:
move that function prototype over to arch/sandbox/include/asm/sdl.h and make test/dm/video.c include <asm/sdl.h>

---

v2:
* move the function to another file instead of including <errno.h>

 arch/sandbox/include/asm/sdl.h  | 23 +++++++++++++++++++++++
 arch/sandbox/include/asm/test.h | 25 -------------------------
 test/dm/video.c                 |  1 +
 3 files changed, 24 insertions(+), 25 deletions(-)
arch/sandbox/include/asm/sdl.h +23 -0
index 56dcb84803d3..ee4991f7c24a 100644
@@ -7,6 +7,7 @@
 #define __SANDBOX_SDL_H
 
 #include <errno.h>
+#include <video.h>
 
 #ifdef CONFIG_SANDBOX_SDL
 
@@ -87,6 +88,22 @@ int sandbox_sdl_sound_stop(void);
  */
 int sandbox_sdl_sound_init(int rate, int channels);
 
+/**
+ * sandbox_sdl_set_bpp() - Set the depth of the sandbox display
+ *
+ * The device must not be active when this function is called. It activiates it
+ * before returning.
+ *
+ * This updates the depth value and adjusts a few other settings accordingly.
+ * It must be called before the display is probed.
+ *
+ * @dev: Device to adjust
+ * @l2bpp: depth to set
+ * Return: 0 if the device was already active, other error if it fails to probe
+ * after the change
+ */
+int sandbox_sdl_set_bpp(struct udevice *dev, enum video_log2_bpp l2bpp);
+
 #else
 static inline int sandbox_sdl_init_display(int width, int height, int log2_bpp,
                                           bool double_size)
@@ -134,6 +151,12 @@ static inline int sandbox_sdl_sound_init(int rate, int channels)
        return -ENODEV;
 }
 
+static inline int sandbox_sdl_set_bpp(struct udevice *dev,
+                                     enum video_log2_bpp l2bpp)
+{
+       return -ENOSYS;
+}
+
 #endif
 
 #endif
arch/sandbox/include/asm/test.h +0 -25
index e482271fe975..17159f8d674a 100644
@@ -8,7 +8,6 @@
 #ifndef __ASM_TEST_H
 #define __ASM_TEST_H
 
-#include <video.h>
 #include <pci_ids.h>
 
 struct unit_test_state;
@@ -300,30 +299,6 @@ void sandbox_cros_ec_set_test_flags(struct udevice *dev, uint flags);
  */
 int sandbox_cros_ec_get_pwm_duty(struct udevice *dev, uint index, uint *duty);
 
-#if IS_ENABLED(CONFIG_SANDBOX_SDL)
-/**
- * sandbox_sdl_set_bpp() - Set the depth of the sandbox display
- *
- * The device must not be active when this function is called. It activiates it
- * before returning.
- *
- * This updates the depth value and adjusts a few other settings accordingly.
- * It must be called before the display is probed.
- *
- * @dev: Device to adjust
- * @l2bpp: depth to set
- * Return: 0 if the device was already active, other error if it fails to probe
- * after the change
- */
-int sandbox_sdl_set_bpp(struct udevice *dev, enum video_log2_bpp l2bpp);
-#else
-static inline int sandbox_sdl_set_bpp(struct udevice *dev,
-                                     enum video_log2_bpp l2bpp)
-{
-       return -ENOSYS;
-}
-#endif
-
 /**
  * sandbox_set_fake_efi_mgr_dev() - Control EFI bootmgr producing valid bootflow
  *
test/dm/video.c +0 -0
index 30778157d940..1c63d16bd28b 100644
Quoted 8 lines

test/dm/video.c line 18

Quoted 5 lines
test/dm/video.c +1 -0
@@ -15,6 +15,7 @@
 #include <video.h>
 #include <video_console.h>
 #include <asm/test.h>
+#include <asm/sdl.h>

The problem with this is it then cannot be built on non-sandbox boards. I think v1 was OK.

I suggested this since the test is sandbox specific (the code itself is full of sandbox_foo).

Signature · 1 line
Tom
#3 lore raw
In reply to Simon Glass
Quoted 2 lines · Simon Glass

The problem with this is it then cannot be built on non-sandbox boards. I think v1 was OK.

Before the patch as well as after the patch:
if CONFIG_SANDBOX_SDL
declaration of sandbox_sdl_set_bpp()
else
definition of sandbox_sdl_set_bpp() returning error
end
This patch only moves code to another header file in arch/sandbox/include/asm. How can a non-sandbox build fail because of this patch?

#4 lore raw
Quoted 4 lines · Sergei Antonov
Quoted 2 lines · Simon Glass

The problem with this is it then cannot be built on non-sandbox boards. I think v1 was OK.

Quoted 8 lines

Before the patch as well as after the patch:
if CONFIG_SANDBOX_SDL
declaration of sandbox_sdl_set_bpp()
else
definition of sandbox_sdl_set_bpp() returning error
end
This patch only moves code to another header file in arch/sandbox/include/asm. How can a non-sandbox build fail because of this patch?

Right, test/dm/video.c is for sandbox-only.

Signature · 1 line
Tom
Reviewed-by
#5 lore raw

Hi,

Quoted 15 lines · Tom Rini
Quoted 4 lines · Sergei Antonov
Quoted 2 lines · Simon Glass

The problem with this is it then cannot be built on non-sandbox boards. I think v1 was OK.

Quoted 8 lines

Before the patch as well as after the patch:
if CONFIG_SANDBOX_SDL
declaration of sandbox_sdl_set_bpp()
else
definition of sandbox_sdl_set_bpp() returning error
end
This patch only moves code to another header file in arch/sandbox/include/asm. How can a non-sandbox build fail because of this patch?

Quoted 1 line

Right, test/dm/video.c is for sandbox-only.

OK, yes.

Regards,
Simon

Reviewed-by
#6 lore raw

Hi,

Quoted 15 lines · Tom Rini
Quoted 4 lines · Sergei Antonov
Quoted 2 lines · Simon Glass

The problem with this is it then cannot be built on non-sandbox boards. I think v1 was OK.

Quoted 8 lines

Before the patch as well as after the patch:
if CONFIG_SANDBOX_SDL
declaration of sandbox_sdl_set_bpp()
else
definition of sandbox_sdl_set_bpp() returning error
end
This patch only moves code to another header file in arch/sandbox/include/asm. How can a non-sandbox build fail because of this patch?

Quoted 1 line

Right, test/dm/video.c is for sandbox-only.

OK, yes.

Regards,
Simon

Applied to u-boot-dm, thanks!