Skip to contentSkip to conversation

xtensa: add load/store exception handler

PATCH New Max Filippov 1 participant 5 messages Jun 14, 2023

Subsystems (2)
lore
Share & tools
lore

Max Filippov

author maintainer
#0 lore raw

cover xtensa: add load/store exception handler

Hello,

this series rearranges unaligned exception handler and adds load/store exception handler that allows transparent 1- and 2-byte wide reads from memory attached to an instruction bus of an xtensa core.

Max Filippov (4):
xtensa: move early_trap_init from kasan_early_init to init_arch
xtensa: always install slow handler for unaligned access exception
xtensa: rearrange unaligned exception handler
xtensa: add load/store exception handler

 arch/xtensa/Kconfig             |  12 ++
 arch/xtensa/include/asm/traps.h |   7 +
 arch/xtensa/kernel/align.S      | 256 ++++++++++++++++++++++----------
 arch/xtensa/kernel/setup.c      |   7 +
 arch/xtensa/kernel/traps.c      |  27 +++-
 arch/xtensa/mm/kasan_init.c     |   2 -
 6 files changed, 221 insertions(+), 90 deletions(-)
Signature · 1 line
2.30.2
author maintainer
#1 lore raw

PATCH 1/4 xtensa: move early_trap_init from kasan_early_init to init_arch

There may be other users for the early traps besides KASAN. Move call to the early_trap_init from kasan_early_init. Protect init_exc_table initializer with ifdef to make sure it builds on noMMU configurations.

---
 arch/xtensa/include/asm/traps.h | 2 ++
 arch/xtensa/kernel/setup.c      | 6 ++++++
 arch/xtensa/mm/kasan_init.c     | 2 --
 3 files changed, 8 insertions(+), 2 deletions(-)
arch/xtensa/include/asm/traps.h +2 -0
index 6f74ccc0c7ea..acffb02f8760 100644
@@ -64,8 +64,10 @@ void do_unhandled(struct pt_regs *regs);
 static inline void __init early_trap_init(void)
 {
 	static struct exc_table init_exc_table __initdata = {
+#ifdef CONFIG_MMU
 		.fast_kernel_handler[EXCCAUSE_DTLB_MISS] =
 			fast_second_level_miss,
+#endif
 	};
 	xtensa_set_sr(&init_exc_table, excsave1);
 }
arch/xtensa/kernel/setup.c +6 -0
index 94aafa19771b..5c0c0fcac144 100644
@@ -47,6 +47,7 @@
 #include <asm/smp.h>
 #include <asm/sysmem.h>
 #include <asm/timex.h>
+#include <asm/traps.h>
 
 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
 struct screen_info screen_info = {
@@ -242,6 +243,11 @@ void __init early_init_devtree(void *params)
 
 void __init init_arch(bp_tag_t *bp_start)
 {
+	/* Initialize basic exception handling if configuration may need it */
+
+	if (IS_ENABLED(CONFIG_KASAN))
+		early_trap_init();
+
 	/* Initialize MMU. */
 
 	init_mmu();
arch/xtensa/mm/kasan_init.c +0 -2
index 1fef24db2ff6..f00d122aa806 100644
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <asm/initialize_mmu.h>
 #include <asm/tlbflush.h>
-#include <asm/traps.h>
 
 void __init kasan_early_init(void)
 {
@@ -31,7 +30,6 @@ void __init kasan_early_init(void)
 		BUG_ON(!pmd_none(*pmd));
 		set_pmd(pmd, __pmd((unsigned long)kasan_early_shadow_pte));
 	}
-	early_trap_init();
 }
 
 static void __init populate(void *start, void *end)
Signature · 1 line
2.30.2
author maintainer
#2 lore raw

PATCH 2/4 xtensa: always install slow handler for unaligned access exception

In reply to Max Filippov

Currently slow handler for unaligned access exception is not installed when CPU has hardware support for unaligned access. However some opcodes (e.g. l32ai, s32ri, s32c1i) would still raise unaligned access exception even on such CPUs. In that case instead of SIGBUS and a diagnostic entry in the kernel log the faulting process would receive SIGILL. Always install slow handler for unaligned access exception to fix that.

---
 arch/xtensa/kernel/traps.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)
arch/xtensa/kernel/traps.c +1 -5
index a92c8593d4f1..f447262468c5 100644
@@ -54,9 +54,7 @@ static void do_interrupt(struct pt_regs *regs);
 #if XTENSA_FAKE_NMI
 static void do_nmi(struct pt_regs *regs);
 #endif
-#if XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION
 static void do_unaligned_user(struct pt_regs *regs);
-#endif
 static void do_multihit(struct pt_regs *regs);
 #if XTENSA_HAVE_COPROCESSORS
 static void do_coprocessor(struct pt_regs *regs);
@@ -102,9 +100,9 @@ static dispatch_init_table_t __initdata dispatch_init_table[] = {
 #ifdef CONFIG_XTENSA_UNALIGNED_USER
 { EXCCAUSE_UNALIGNED,		USER,	   fast_unaligned },
 #endif
-{ EXCCAUSE_UNALIGNED,		0,	   do_unaligned_user },
 { EXCCAUSE_UNALIGNED,		KRNL,	   fast_unaligned },
 #endif
+{ EXCCAUSE_UNALIGNED,		0,	   do_unaligned_user },
 #ifdef CONFIG_MMU
 { EXCCAUSE_ITLB_MISS,			0,	   do_page_fault },
 { EXCCAUSE_ITLB_MISS,			USER|KRNL, fast_second_level_miss},
@@ -363,7 +361,6 @@ static void do_div0(struct pt_regs *regs)
  * accesses causes from user space.
  */
 
-#if XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION
 static void do_unaligned_user(struct pt_regs *regs)
 {
 	__die_if_kernel("Unhandled unaligned exception in kernel",
@@ -375,7 +372,6 @@ static void do_unaligned_user(struct pt_regs *regs)
 			    task_pid_nr(current), regs->pc);
 	force_sig_fault(SIGBUS, BUS_ADRALN, (void *) regs->excvaddr);
 }
-#endif
 
 #if XTENSA_HAVE_COPROCESSORS
 static void do_coprocessor(struct pt_regs *regs)
Signature · 1 line
2.30.2
author maintainer
#3 lore raw

PATCH 3/4 xtensa: rearrange unaligned exception handler

In reply to Max Filippov

- extract initialization part of the exception handler into a separate function.
- use single label for invalid instruction instead of two labels, one for load and one for store, at one place.
- use sext instruction for sign extension when available.
- store SAR on the stack instead of in a0.
- replace numeric labels for load and store writeback with .Lload_w and .Lstore_w respectively.

---
 arch/xtensa/kernel/align.S | 171 +++++++++++++++++++------------------
 1 file changed, 89 insertions(+), 82 deletions(-)
arch/xtensa/kernel/align.S +89 -82
index d062c732ef18..bcbd7962a684 100644
@@ -157,58 +157,7 @@
 	.literal_position
 ENTRY(fast_unaligned)
 
-	/* Note: We don't expect the address to be aligned on a word
-	 *       boundary. After all, the processor generated that exception
-	 *       and it would be a hardware fault.
-	 */
-
-	/* Save some working register */
-
-	s32i	a4, a2, PT_AREG4
-	s32i	a5, a2, PT_AREG5
-	s32i	a6, a2, PT_AREG6
-	s32i	a7, a2, PT_AREG7
-	s32i	a8, a2, PT_AREG8
-
-	rsr	a0, depc
-	s32i	a0, a2, PT_AREG2
-	s32i	a3, a2, PT_AREG3
-
-	rsr	a3, excsave1
-	movi	a4, fast_unaligned_fixup
-	s32i	a4, a3, EXC_TABLE_FIXUP
-
-	/* Keep value of SAR in a0 */
-
-	rsr	a0, sar
-	rsr	a8, excvaddr		# load unaligned memory address
-
-	/* Now, identify one of the following load/store instructions.
-	 *
-	 * The only possible danger of a double exception on the
-	 * following l32i instructions is kernel code in vmalloc
-	 * memory. The processor was just executing at the EPC_1
-	 * address, and indeed, already fetched the instruction.  That
-	 * guarantees a TLB mapping, which hasn't been replaced by
-	 * this unaligned exception handler that uses only static TLB
-	 * mappings. However, high-level interrupt handlers might
-	 * modify TLB entries, so for the generic case, we register a
-	 * TABLE_FIXUP handler here, too.
-	 */
-
-	/* a3...a6 saved on stack, a2 = SP */
-
-	/* Extract the instruction that caused the unaligned access. */
-
-	rsr	a7, epc1	# load exception address
-	movi	a3, ~3
-	and	a3, a3, a7	# mask lower bits
-
-	l32i	a4, a3, 0	# load 2 words
-	l32i	a5, a3, 4
-
-	__ssa8	a7
-	__src_b	a4, a4, a5	# a4 has the instruction
+	call0	.Lsave_and_load_instruction
 
 	/* Analyze the instruction (load or store?). */
 
@@ -249,7 +198,7 @@ ENTRY(fast_unaligned)
 	addi	a7, a7, 2		# increment PC (assume 16-bit insn)
 
 	extui	a5, a4, INSN_OP0, 4
-	_beqi	a5, OP0_L32I_N, 1f	# l32i.n: jump
+	_beqi	a5, OP0_L32I_N, .Lload_w# l32i.n: jump
 
 	addi	a7, a7, 1
 #else
@@ -257,21 +206,24 @@ ENTRY(fast_unaligned)
 #endif
 
 	extui	a5, a4, INSN_OP1, 4
-	_beqi	a5, OP1_L32I, 1f	# l32i: jump
+	_beqi	a5, OP1_L32I, .Lload_w	# l32i: jump
 
 	extui	a3, a3, 0, 16		# extract lower 16 bits
-	_beqi	a5, OP1_L16UI, 1f
+	_beqi	a5, OP1_L16UI, .Lload_w
 	addi	a5, a5, -OP1_L16SI
-	_bnez	a5, .Linvalid_instruction_load
+	_bnez	a5, .Linvalid_instruction
 
 	/* sign extend value */
-
+#if XCHAL_HAVE_SEXT
+	sext	a3, a3, 15
+#else
 	slli	a3, a3, 16
 	srai	a3, a3, 16
+#endif
 
 	/* Set target register. */
 
-1:
+.Lload_w:
 	extui	a4, a4, INSN_T, 4	# extract target register
 	movi	a5, .Lload_table
 	addx8	a4, a4, a5
@@ -297,28 +249,27 @@ ENTRY(fast_unaligned)
 	mov	a15, a3		;	_j .Lexit;	.align 8
 
 .Lstore_table:
-	l32i	a3, a2, PT_AREG0;	_j 1f;	.align 8
-	mov	a3, a1;			_j 1f;	.align 8	# fishy??
-	l32i	a3, a2, PT_AREG2;	_j 1f;	.align 8
-	l32i	a3, a2, PT_AREG3;	_j 1f;	.align 8
-	l32i	a3, a2, PT_AREG4;	_j 1f;	.align 8
-	l32i	a3, a2, PT_AREG5;	_j 1f;	.align 8
-	l32i	a3, a2, PT_AREG6;	_j 1f;	.align 8
-	l32i	a3, a2, PT_AREG7;	_j 1f;	.align 8
-	l32i	a3, a2, PT_AREG8;	_j 1f;	.align 8
-	mov	a3, a9		;	_j 1f;	.align 8
-	mov	a3, a10		;	_j 1f;	.align 8
-	mov	a3, a11		;	_j 1f;	.align 8
-	mov	a3, a12		;	_j 1f;	.align 8
-	mov	a3, a13		;	_j 1f;	.align 8
-	mov	a3, a14		;	_j 1f;	.align 8
-	mov	a3, a15		;	_j 1f;	.align 8
+	l32i	a3, a2, PT_AREG0;	_j .Lstore_w;	.align 8
+	mov	a3, a1;			_j .Lstore_w;	.align 8	# fishy??
+	l32i	a3, a2, PT_AREG2;	_j .Lstore_w;	.align 8
+	l32i	a3, a2, PT_AREG3;	_j .Lstore_w;	.align 8
+	l32i	a3, a2, PT_AREG4;	_j .Lstore_w;	.align 8
+	l32i	a3, a2, PT_AREG5;	_j .Lstore_w;	.align 8
+	l32i	a3, a2, PT_AREG6;	_j .Lstore_w;	.align 8
+	l32i	a3, a2, PT_AREG7;	_j .Lstore_w;	.align 8
+	l32i	a3, a2, PT_AREG8;	_j .Lstore_w;	.align 8
+	mov	a3, a9		;	_j .Lstore_w;	.align 8
+	mov	a3, a10		;	_j .Lstore_w;	.align 8
+	mov	a3, a11		;	_j .Lstore_w;	.align 8
+	mov	a3, a12		;	_j .Lstore_w;	.align 8
+	mov	a3, a13		;	_j .Lstore_w;	.align 8
+	mov	a3, a14		;	_j .Lstore_w;	.align 8
+	mov	a3, a15		;	_j .Lstore_w;	.align 8
 
 	/* We cannot handle this exception. */
 
 	.extern _kernel_exception
-.Linvalid_instruction_load:
-.Linvalid_instruction_store:
+.Linvalid_instruction:
 
 	movi	a4, 0
 	rsr	a3, excsave1
@@ -326,6 +277,7 @@ ENTRY(fast_unaligned)
 
 	/* Restore a4...a8 and SAR, set SP, and jump to default exception. */
 
+	l32i	a0, a2, PT_SAR
 	l32i	a8, a2, PT_AREG8
 	l32i	a7, a2, PT_AREG7
 	l32i	a6, a2, PT_AREG6
@@ -343,8 +295,8 @@ ENTRY(fast_unaligned)
 2:	movi	a0, _user_exception
 	jx	a0
 
-1: 	# a7: instruction pointer, a4: instruction, a3: value
-
+	# a7: instruction pointer, a4: instruction, a3: value
+.Lstore_w:
 	movi	a6, 0			# mask: ffffffff:00000000
 
 #if XCHAL_HAVE_DENSITY
@@ -361,7 +313,7 @@ ENTRY(fast_unaligned)
 
 	extui	a5, a4, INSN_OP1, 4	# extract OP1
 	_beqi	a5, OP1_S32I, 1f	# jump if 32 bit store
-	_bnei	a5, OP1_S16I, .Linvalid_instruction_store
+	_bnei	a5, OP1_S16I, .Linvalid_instruction
 
 	movi	a5, -1
 	__extl	a3, a3			# get 16-bit value
@@ -434,6 +386,7 @@ ENTRY(fast_unaligned)
 
 	/* Restore working register */
 
+	l32i	a0, a2, PT_SAR
 	l32i	a8, a2, PT_AREG8
 	l32i	a7, a2, PT_AREG7
 	l32i	a6, a2, PT_AREG6
@@ -448,6 +401,59 @@ ENTRY(fast_unaligned)
 	l32i	a2, a2, PT_AREG2
 	rfe
 
+	.align	4
+.Lsave_and_load_instruction:
+
+	/* Save some working register */
+
+	s32i	a3, a2, PT_AREG3
+	s32i	a4, a2, PT_AREG4
+	s32i	a5, a2, PT_AREG5
+	s32i	a6, a2, PT_AREG6
+	s32i	a7, a2, PT_AREG7
+	s32i	a8, a2, PT_AREG8
+
+	rsr	a4, depc
+	s32i	a4, a2, PT_AREG2
+
+	rsr	a5, sar
+	s32i	a5, a2, PT_SAR
+
+	rsr	a3, excsave1
+	movi	a4, fast_unaligned_fixup
+	s32i	a4, a3, EXC_TABLE_FIXUP
+
+	rsr	a8, excvaddr		# load unaligned memory address
+
+	/* Now, identify one of the following load/store instructions.
+	 *
+	 * The only possible danger of a double exception on the
+	 * following l32i instructions is kernel code in vmalloc
+	 * memory. The processor was just executing at the EPC_1
+	 * address, and indeed, already fetched the instruction.  That
+	 * guarantees a TLB mapping, which hasn't been replaced by
+	 * this unaligned exception handler that uses only static TLB
+	 * mappings. However, high-level interrupt handlers might
+	 * modify TLB entries, so for the generic case, we register a
+	 * TABLE_FIXUP handler here, too.
+	 */
+
+	/* a3...a6 saved on stack, a2 = SP */
+
+	/* Extract the instruction that caused the unaligned access. */
+
+	rsr	a7, epc1	# load exception address
+	movi	a3, ~3
+	and	a3, a3, a7	# mask lower bits
+
+	l32i	a4, a3, 0	# load 2 words
+	l32i	a5, a3, 4
+
+	__ssa8	a7
+	__src_b	a4, a4, a5	# a4 has the instruction
+
+	ret
+
 ENDPROC(fast_unaligned)
 
 ENTRY(fast_unaligned_fixup)
@@ -459,10 +465,11 @@ ENTRY(fast_unaligned_fixup)
 	l32i	a7, a2, PT_AREG7
 	l32i	a6, a2, PT_AREG6
 	l32i	a5, a2, PT_AREG5
-	l32i	a4, a2, PT_AREG4
+	l32i	a4, a2, PT_SAR
 	l32i	a0, a2, PT_AREG2
-	xsr	a0, depc			# restore depc and a0
-	wsr	a0, sar
+	wsr	a4, sar
+	wsr	a0, depc			# restore depc and a0
+	l32i	a4, a2, PT_AREG4
 
 	rsr	a0, exccause
 	s32i	a0, a2, PT_DEPC			# mark as a regular exception
Signature · 1 line
2.30.2
author maintainer
#4 lore raw

PATCH 4/4 xtensa: add load/store exception handler

In reply to Max Filippov

Memory attached to instruction bus of the xtensa CPU is only accessible for a limited subset of opcodes. Other opcodes generate an exception with the load/store error cause code. This property complicates use of such systems. Provide a handler that recognizes and transparently fixes such exceptions. The following opcodes are recognized when used outside of FLIX bundles: l32i, l32i.n, l16ui, l16si, l8ui.

---
 arch/xtensa/Kconfig             |  12 ++++
 arch/xtensa/include/asm/traps.h |   5 ++
 arch/xtensa/kernel/align.S      | 109 ++++++++++++++++++++++++++++----
 arch/xtensa/kernel/setup.c      |   3 +-
 arch/xtensa/kernel/traps.c      |  21 +++++-
 5 files changed, 136 insertions(+), 14 deletions(-)
arch/xtensa/Kconfig +12 -0
index b1189f085a68..c9cb0cc78ebb 100644
@@ -209,6 +209,18 @@ config XTENSA_UNALIGNED_USER
 
 	  Say Y here to enable unaligned memory access in user space.
 
+config XTENSA_LOAD_STORE
+	bool "Load/store exception handler for memory only readable with l32"
+	help
+	  The Xtensa architecture only allows reading memory attached to its
+	  instruction bus with l32r and l32i instructions, all other
+	  instructions raise an exception with the LoadStoreErrorCause code.
+	  This makes it hard to use some configurations, e.g. store string
+	  literals in FLASH memory attached to the instruction bus.
+
+	  Say Y here to enable exception handler that allows transparent
+	  byte and 2-byte access to memory attached to instruction bus.
+
 config HAVE_SMP
 	bool "System Supports SMP (MX)"
 	depends on XTENSA_VARIANT_CUSTOM
arch/xtensa/include/asm/traps.h +5 -0
index acffb02f8760..212c3b9ff407 100644
@@ -47,6 +47,7 @@ __init trap_set_handler(int cause, xtensa_exception_handler *handler);
 asmlinkage void fast_illegal_instruction_user(void);
 asmlinkage void fast_syscall_user(void);
 asmlinkage void fast_alloca(void);
+asmlinkage void fast_load_store(void);
 asmlinkage void fast_unaligned(void);
 asmlinkage void fast_second_level_miss(void);
 asmlinkage void fast_store_prohibited(void);
@@ -64,6 +65,10 @@ void do_unhandled(struct pt_regs *regs);
 static inline void __init early_trap_init(void)
 {
 	static struct exc_table init_exc_table __initdata = {
+#ifdef CONFIG_XTENSA_LOAD_STORE
+		.fast_kernel_handler[EXCCAUSE_LOAD_STORE_ERROR] =
+			fast_load_store,
+#endif
 #ifdef CONFIG_MMU
 		.fast_kernel_handler[EXCCAUSE_DTLB_MISS] =
 			fast_second_level_miss,
arch/xtensa/kernel/align.S +97 -12

196 lines not on this page · raw message

arch/xtensa/kernel/setup.c +2 -1
index 5c0c0fcac144..08d9cb5cbd41 100644
@@ -245,7 +245,8 @@ void __init init_arch(bp_tag_t *bp_start)
 {
 	/* Initialize basic exception handling if configuration may need it */
 
-	if (IS_ENABLED(CONFIG_KASAN))
+	if (IS_ENABLED(CONFIG_KASAN) ||
+	    IS_ENABLED(CONFIG_XTENSA_LOAD_STORE))
 		early_trap_init();
 
 	/* Initialize MMU. */
arch/xtensa/kernel/traps.c +20 -1
index f447262468c5..5fc19aa5ba5d 100644
@@ -54,6 +54,9 @@ static void do_interrupt(struct pt_regs *regs);
 #if XTENSA_FAKE_NMI
 static void do_nmi(struct pt_regs *regs);
 #endif
+#ifdef CONFIG_XTENSA_LOAD_STORE
+static void do_load_store(struct pt_regs *regs);
+#endif
 static void do_unaligned_user(struct pt_regs *regs);
 static void do_multihit(struct pt_regs *regs);
 #if XTENSA_HAVE_COPROCESSORS
@@ -89,7 +92,10 @@ static dispatch_init_table_t __initdata dispatch_init_table[] = {
 { EXCCAUSE_SYSTEM_CALL,		USER,	   fast_syscall_user },
 { EXCCAUSE_SYSTEM_CALL,		0,	   system_call },
 /* EXCCAUSE_INSTRUCTION_FETCH unhandled */
-/* EXCCAUSE_LOAD_STORE_ERROR unhandled*/
+#ifdef CONFIG_XTENSA_LOAD_STORE
+{ EXCCAUSE_LOAD_STORE_ERROR,	USER|KRNL, fast_load_store },
+{ EXCCAUSE_LOAD_STORE_ERROR,	0,	   do_load_store },
+#endif
 { EXCCAUSE_LEVEL1_INTERRUPT,	0,	   do_interrupt },
 #ifdef SUPPORT_WINDOWED
 { EXCCAUSE_ALLOCA,		USER|KRNL, fast_alloca },
@@ -354,6 +360,19 @@ static void do_div0(struct pt_regs *regs)
 	force_sig_fault(SIGFPE, FPE_INTDIV, (void __user *)regs->pc);
 }
 
+#ifdef CONFIG_XTENSA_LOAD_STORE
+static void do_load_store(struct pt_regs *regs)
+{
+	__die_if_kernel("Unhandled load/store exception in kernel",
+			regs, SIGKILL);
+
+	pr_info_ratelimited("Load/store error to %08lx in '%s' (pid = %d, pc = %#010lx)\n",
+			    regs->excvaddr, current->comm,
+			    task_pid_nr(current), regs->pc);
+	force_sig_fault(SIGBUS, BUS_ADRERR, (void *)regs->excvaddr);
+}
+#endif
+
 /*
  * Handle unaligned memory accesses from user space. Kill task.
  *
Signature · 1 line
2.30.2