regmap: Account for register length when chunking
Subsystems (8)
Sasha Levin
maintainerPATCH 1/8 regmap: Account for register length when chunking
From: Jim Wylder <[email protected]>
[ Upstream commit 3981514180c987a79ea98f0ae06a7cbf58a9ac0f ]
Currently, when regmap_raw_write() splits the data, it uses the max_raw_write value defined for the bus. For any bus that includes the target register address in the max_raw_write value, the chunked transmission will always exceed the maximum transmission length. To avoid this problem, subtract the length of the register and the padding from the maximum transmission.
--- drivers/base/regmap/regmap.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/base/regmap/regmap.c +4 -2
@@ -1850,6 +1850,8 @@ int _regmap_raw_write(struct regmap *map, unsigned int reg,size_t val_count = val_len / val_bytes;size_t chunk_count, chunk_bytes;size_t chunk_regs = val_count; +size_t max_data = map->max_raw_write - map->format.reg_bytes - + map->format.pad_bytes;int ret, i;if (!val_count)
@@ -1857,8 +1859,8 @@ int _regmap_raw_write(struct regmap *map, unsigned int reg,if (map->use_single_write) chunk_regs =1 ; -else if (map->max_raw_write && val_len > map->max_raw_write) - chunk_regs = map->max_raw_write / val_bytes; +else if (map->max_raw_write && val_len > max_data) + chunk_regs = max_data / val_bytes; chunk_count = val_count / chunk_regs; chunk_bytes = chunk_regs * val_bytes;
Signature · 1 line
2.39.2
Sasha Levin
maintainerPATCH 2/8 scsi: target: iscsi: Prevent login threads from racing between each other
From: Maurizio Lombardi <[email protected]>
[ Upstream commit 2a737d3b8c792400118d6cf94958f559de9c5e59 ]
The tpg->np_login_sem is a semaphore that is used to serialize the login process when multiple login threads run concurrently against the same target portal group.
The iscsi_target_locate_portal() function finds the tpg, calls iscsit_access_np() against the np_login_sem semaphore and saves the tpg pointer in conn->tpg;
If iscsi_target_locate_portal() fails, the caller will check for the conn->tpg pointer and, if it's not NULL, then it will assume that iscsi_target_locate_portal() called iscsit_access_np() on the semaphore.
Make sure that conn->tpg gets initialized only if iscsit_access_np() was successful, otherwise iscsit_deaccess_np() may end up being called against a semaphore we never took, allowing more than one thread to access the same tpg.
--- drivers/target/iscsi/iscsi_target_nego.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/target/iscsi/iscsi_target_nego.c +3 -1
@@ -1053,6 +1053,7 @@ int iscsi_target_locate_portal(iscsi_target_set_sock_callbacks (conn); login->np = np; + conn->tpg =NULL ; login_req = (struct iscsi_login_req *) login->req; payload_length =ntoh24 (login_req->dlength);
@@ -1122,7 +1123,6 @@ int iscsi_target_locate_portal(*/ sessiontype =strncmp (s_buf,DISCOVERY ,9 );if (!sessiontype) { - conn->tpg = iscsit_global->discovery_tpg;if (!login->leading_connection) goto get_target;
@@ -1139,9 +1139,11 @@ int iscsi_target_locate_portal(* Serialize access across the discovery struct iscsi_portal_group to * process login attempt. */ + conn->tpg = iscsit_global->discovery_tpg;if (iscsit_access_np (np, conn->tpg) <0 ) {iscsit_tx_login_rsp (conn,ISCSI_STATUS_CLS_TARGET_ERR ,ISCSI_LOGIN_STATUS_SVC_UNAVAILABLE ); + conn->tpg =NULL ; ret =-1 ; goto out; }
Signature · 1 line
2.39.2
Sasha Levin
maintainerPATCH 3/8 HID: google: add jewel USB id
In reply to Sasha LevinFrom: Sung-Chi Li <[email protected]>
[ Upstream commit ed84c4517a5bc536e8572a01dfa11bc22a280d06 ]
Add 1 additional hammer-like device.
--- drivers/hid/hid-google-hammer.c | 2 ++ drivers/hid/hid-ids.h | 1 + 2 files changed, 3 insertions(+)
drivers/hid/hid-google-hammer.c +2 -0
@@ -473,6 +473,8 @@ static const struct hid_device_id hammer_devices[] = { USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_EEL) }, {HID_DEVICE (BUS_USB ,HID_GROUP_GENERIC , USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_HAMMER) }, + { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, + USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_JEWEL) }, { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_MAGNEMITE) }, { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
drivers/hid/hid-ids.h +1 -0
@@ -490,6 +490,7 @@#define USB_DEVICE_ID_GOOGLE_MOONBALL 0x5044#define USB_DEVICE_ID_GOOGLE_DON 0x5050#define USB_DEVICE_ID_GOOGLE_EEL 0x5057 +#define USB_DEVICE_ID_GOOGLE_JEWEL 0x5061#define USB_VENDOR_ID_GOTOP 0x08f2#define USB_DEVICE_ID_SUPER_Q2 0x007f
Signature · 1 line
2.39.2
Sasha Levin
maintainerPATCH 4/8 HID: wacom: Add error check to wacom_parse_and_register()
In reply to Sasha LevinFrom: Denis Arefev <[email protected]>
[ Upstream commit 16a9c24f24fbe4564284eb575b18cc20586b9270 ]
Added a variable check and
transition in case of an error
Found by Linux Verification Center (linuxtesting.org) with SVACE.
--- drivers/hid/wacom_sys.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/hid/wacom_sys.c +6 -1
@@ -2419,8 +2419,13 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless) goto fail_quirks; } -if (features->device_type &WACOM_DEVICETYPE_WL_MONITOR ) +if (features->device_type &WACOM_DEVICETYPE_WL_MONITOR ) { error =hid_hw_open (hdev); +if (error) { +hid_err (hdev,"hw open failed\n" ); + goto fail_quirks; + } + }wacom_set_shared_values (wacom_wac);devres_close_group (&hdev->dev, wacom);
Signature · 1 line
2.39.2
Sasha Levin
maintainerPATCH 5/8 arm64: Add missing Set/Way CMO encodings
In reply to Sasha LevinFrom: Marc Zyngier <[email protected]>
[ Upstream commit 8d0f019e4c4f2ee2de81efd9bf1c27e9fb3c0460 ]
Add the missing Set/Way CMOs that apply to tagged memory.
--- arch/arm64/include/asm/sysreg.h | 6 ++++++ 1 file changed, 6 insertions(+)
arch/arm64/include/asm/sysreg.h +6 -0
@@ -102,8 +102,14 @@#define SB_BARRIER_INSN __SYS_BARRIER_INSN(0, 7, 31)#define SYS_DC_ISW sys_insn(1, 0, 7, 6, 2) +#define SYS_DC_IGSW sys_insn(1, 0, 7, 6, 4) +#define SYS_DC_IGDSW sys_insn(1, 0, 7, 6, 6)#define SYS_DC_CSW sys_insn(1, 0, 7, 10, 2) +#define SYS_DC_CGSW sys_insn(1, 0, 7, 10, 4) +#define SYS_DC_CGDSW sys_insn(1, 0, 7, 10, 6)#define SYS_DC_CISW sys_insn(1, 0, 7, 14, 2) +#define SYS_DC_CIGSW sys_insn(1, 0, 7, 14, 4) +#define SYS_DC_CIGDSW sys_insn(1, 0, 7, 14, 6)#define SYS_OSDTRRX_EL1 sys_reg(2, 0, 0, 0, 2)#define SYS_MDCCINT_EL1 sys_reg(2, 0, 0, 2, 0)
Signature · 7 lines
2.39.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Sasha Levin
maintainerPATCH 6/8 media: cec: core: don't set last_initiator if tx in progress
In reply to Sasha LevinFrom: Hans Verkuil <[email protected]>
[ Upstream commit 73af6c7511038249cad3d5f3b44bf8d78ac0f499 ]
When a message was received the last_initiator is set to 0xff. This will force the signal free time for the next transmit to that for a new initiator. However, if a new transmit is already in progress, then don't set last_initiator, since that's the initiator of the current transmit. Overwriting this would cause the signal free time of a following transmit to be that of the new initiator instead of a next transmit.
--- drivers/media/cec/cec-adap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/media/cec/cec-adap.c +2 -1
@@ -1077,7 +1077,8 @@ void cec_received_msg_ts(struct cec_adapter *adap,mutex_lock (&adap->lock);dprintk (2 ,"%s: %*ph\n" , __func__, msg->len, msg->msg); - adap->last_initiator =0xff ; +if (!adap->transmit_in_progress) + adap->last_initiator =0xff ;/* Check if this message was for us (directed or broadcast). */ if (!cec_msg_is_broadcast (msg))
Signature · 1 line
2.39.2
Sasha Levin
maintainerPATCH 7/8 nfcsim.c: Fix error checking for debugfs_create_dir
In reply to Sasha LevinFrom: Osama Muhammad <[email protected]>
[ Upstream commit 9b9e46aa07273ceb96866b2e812b46f1ee0b8d2f ]
This patch fixes the error checking in nfcsim.c. The DebugFS kernel API is developed in
a way that the caller can safely ignore the errors that occur during the creation of DebugFS nodes.
--- drivers/nfc/nfcsim.c | 4 ---- 1 file changed, 4 deletions(-)
drivers/nfc/nfcsim.c +0 -4
@@ -336,10 +336,6 @@ static struct dentry *nfcsim_debugfs_root;static void nfcsim_debugfs_init (void ) { nfcsim_debugfs_root =debugfs_create_dir ("nfcsim" ,NULL ); - -if (!nfcsim_debugfs_root) -pr_err ("Could not create debugfs entry\n" ); - }static void nfcsim_debugfs_remove (void )
Signature · 1 line
2.39.2
Sasha Levin
maintainerPATCH 8/8 usb: gadget: udc: fix NULL dereference in remove()
In reply to Sasha LevinFrom: Dan Carpenter <[email protected]>
[ Upstream commit 016da9c65fec9f0e78c4909ed9a0f2d567af6775 ]
The "udc" pointer was never set in the probe() function so it will lead to a NULL dereference in udc_pci_remove() when we do:
usb_del_gadget_udc(&udc->gadget);
--- drivers/usb/gadget/udc/amd5536udc_pci.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/usb/gadget/udc/amd5536udc_pci.c +3 -0
@@ -171,6 +171,9 @@ static int udc_pci_probe( retval = -ENODEV ; goto err_probe; } + + udc = dev; +return 0 ; err_probe:
Signature · 1 line
2.39.2