Skip to contentSkip to conversation

More Qualcomm ARM32 DeviceTree updates for v6.5

GIT PULL Applied Bjorn Andersson 2 participants 2 messages Jun 15, 2023 – Jun 20, 2023

lore
Share & tools
lore
#0 lore raw

The following changes since commit 925bac3caa46c5790d21ee236869b017090aad2d:

ARM: dts: qcom: apq8074-dragonboard: enable DSI panel (2023-05-30 07:54:19 -0700)

are available in the Git repository at:

https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-dts-for-6.5-2

for you to fetch changes up to 831b802a7727ba6e67c5ed585c54f610d9db1316:

arm: dts: qcom: sdx55: Add interconnect path (2023-06-14 08:07:21 -0700)

----------------------------------------------------------------
More Qualcomm ARM32 DeviceTree updates for v6.5

On MSM8960, support for USB is added and the Samsung Galaxy Express is added.

GPIO keys and on-board LEDs are described for the APQ8074 Dragonboard.

On MSM8226, QFPROM, tsens and thermal zones are defined, and the description of the clock hierarchy is improved.

The PCIe endpoint controller on SDX55 gains a interconnect path to DDR defined.

Sony Xperia X2 Tablet and Samsung Galaxy Tab 4 are updated following changes in the LP855X DeviceTree binding.

----------------------------------------------------------------
Artur Weber (1):
ARM: dts: qcom: adapt to LP855X bindings changes

Dmitry Baryshkov (3):
ARM: dts: qcom: apq8074-dragonboard: add onboard leds
ARM: dts: qcom: apq8074-dragonboard: add gpio keys
ARM: dts: qcom: msm8974: rename labels for DSI nodes

Krishna chaitanya chundru (1):
arm: dts: qcom: sdx55: Add interconnect path

Luca Weiss (2):
ARM: dts: qcom: msm8226: Use XO from rpmcc where possible
ARM: dts: qcom: msm8226: Provide clocks to mmcc node

Matti Lehtimäki (6):
ARM: dts: qcom: pm8226: Add thermal sensor and thermal zone config
ARM: dts: qcom: pm8841: Add thermal zone config
ARM: dts: qcom: pm8941: Add thermal zone config
ARM: dts: qcom: msm8226: Add qfprom node
ARM: dts: qcom: msm8226: Add tsens node and related nvmem cells
ARM: dts: qcom: msm8226: Add thermal zones node

Rudraksha Gupta (2):
ARM: dts: qcom: msm8960: Add USB node
ARM: dts: qcom: Add Samsung Galaxy Express support

 arch/arm/boot/dts/Makefile                         |   1 +
 .../boot/dts/qcom-apq8026-samsung-matisse-wifi.dts |   1 -
 arch/arm/boot/dts/qcom-apq8074-dragonboard.dts     |  74 ++++-
 arch/arm/boot/dts/qcom-msm8226.dtsi                | 190 +++++++++++-
 .../boot/dts/qcom-msm8960-samsung-expressatt.dts   | 331 +++++++++++++++++++++
 arch/arm/boot/dts/qcom-msm8960.dtsi                |  34 ++-
 .../dts/qcom-msm8974-lge-nexus5-hammerhead.dts     |  16 +-
 arch/arm/boot/dts/qcom-msm8974.dtsi                |  36 +--
 arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts |  24 +-
 .../qcom-msm8974pro-sony-xperia-shinano-castor.dts |  23 +-
 arch/arm/boot/dts/qcom-pm8226.dtsi                 |  39 +++
 arch/arm/boot/dts/qcom-pm8841.dtsi                 |  33 +-
 arch/arm/boot/dts/qcom-pm8941.dtsi                 |  31 ++
 arch/arm/boot/dts/qcom-sdx55.dtsi                  |   4 +
 14 files changed, 776 insertions(+), 61 deletions(-)
 create mode 100644 arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts
#1 lore raw
This pull request was applied to soc/soc.git (for-next) by Arnd Bergmann <[email protected]>:

Hello:

This pull request was applied to soc/soc.git (for-next) by Arnd Bergmann <[email protected]>:

Quoted 9 lines · On Thu, 15 Jun 2023 09:39:26 -0700 you wrote:

The following changes since commit 925bac3caa46c5790d21ee236869b017090aad2d:

ARM: dts: qcom: apq8074-dragonboard: enable DSI panel (2023-05-30 07:54:19 -0700)

are available in the Git repository at:

https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-dts-for-6.5-2

[...]

Here is the summary with links:
- [GIT,PULL] More Qualcomm ARM32 DeviceTree updates for v6.5

    https://git.kernel.org/soc/soc/c/6db92533d6a3

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html