FAILED: patch "[PATCH] ALSA: usb-audio: Fix broken resume due to UAC3 power state" failed to apply to 4.19-stable tree

The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y
git checkout FETCH_HEAD
git cherry-pick -x 8ba61c9f6c9bdfbf9d197b0282641d24ae909778
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2023061702-wireless-nibble-7c21@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 8ba61c9f6c9bdfbf9d197b0282641d24ae909778 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <[email protected]>
Date: Mon, 12 Jun 2023 15:28:18 +0200
Subject: [PATCH] ALSA: usb-audio: Fix broken resume due to UAC3 power state

As reported in the bugzilla below, the PM resume of a UAC3 device may fail due to the incomplete power state change, stuck at D1. The reason is that the driver expects the full D0 power state change only at hw_params, while the normal PCM resume procedure doesn't call hw_params.

For fixing the bug, we add the same power state update to D0 at the prepare callback, which is certainly called by the resume procedure.

Note that, with this change, the power state change in the hw_params becomes almost redundant, since snd_usb_hw_params() doesn't touch the parameters (at least it tires so). But dropping it is still a bit risky (e.g. we have the media-driver binding), so I leave the D0 power state change in snd_usb_hw_params() as is for now.

index eec5232f9fb2..08bf535ed163 100644
@@ -650,6 +650,10 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream)
 		goto unlock;
 	}
 
+	ret = snd_usb_pcm_change_state(subs, UAC3_PD_STATE_D0);
+	if (ret < 0)
+		goto unlock;
+
  again:
 	if (subs->sync_endpoint) {
 		ret = snd_usb_endpoint_prepare(chip, subs->sync_endpoint);