Skip to contentSkip to conversation

powerpc: update ppc_save_regs to save current r1 in pt_regs

PATCH New Aditya Gupta 1 participant 1 message Jun 19, 2023 PowerPC

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 powerpc: update ppc_save_regs to save current r1 in pt_regs

ppc_save_regs() skips one stack frame while saving the CPU register states. Instead of saving current R1, it pulls the previous stack frame pointer.

When vmcores caused by direct panic call (such as echo c > /proc/sysrq-trigger), are debugged with gdb, gdb fails to show the backtrace correctly. On further analysis, it was found that it was because of mismatch between r1 and NIP.

GDB uses NIP to get current function symbol and uses corresponding debug info of that function to unwind previous frames, but due to the mismatching r1 and NIP, the unwinding does not work, and it fails to unwind to the 2nd frame and hence does not show the backtrace.

GDB backtrace with vmcore of kernel without this patch:

---------
(gdb) bt
#0 0xc0000000002a53e8 in crash_setup_regs (oldregs=<optimized out>,

    newregs=0xc000000004f8f8d8) at ./arch/powerpc/include/asm/kexec.h:69
 #1  __crash_kexec (regs=<optimized out>) at kernel/kexec_core.c:974
 #2  0x0000000000000063 in ?? ()
 #3  0xc000000003579320 in ?? ()

---------

Further analysis revealed that the mismatch occurred because "ppc_save_regs" was saving the previous stack's SP instead of the current r1. This patch fixes this by storing current r1 in the saved pt_regs.

GDB backtrace with vmcore of patched kernel:

--------
(gdb) bt
#0 0xc0000000002a53e8 in crash_setup_regs (oldregs=0x0, newregs=0xc00000000670b8d8)

    at ./arch/powerpc/include/asm/kexec.h:69
 #1  __crash_kexec (regs=regs@entry=0x0) at kernel/kexec_core.c:974
 #2  0xc000000000168918 in panic (fmt=fmt@entry=0xc000000001654a60 "sysrq triggered crash\n")
    at kernel/panic.c:358
 #3  0xc000000000b735f8 in sysrq_handle_crash (key=<optimized out>) at drivers/tty/sysrq.c:155
 #4  0xc000000000b742cc in __handle_sysrq (key=key@entry=99, check_mask=check_mask@entry=false)
    at drivers/tty/sysrq.c:602
 #5  0xc000000000b7506c in write_sysrq_trigger (file=<optimized out>, buf=<optimized out>,
    count=2, ppos=<optimized out>) at drivers/tty/sysrq.c:1163
 #6  0xc00000000069a7bc in pde_write (ppos=<optimized out>, count=<optimized out>,
    buf=<optimized out>, file=<optimized out>, pde=0xc00000000362cb40) at fs/proc/inode.c:340
 #7  proc_reg_write (file=<optimized out>, buf=<optimized out>, count=<optimized out>,
    ppos=<optimized out>) at fs/proc/inode.c:352
 #8  0xc0000000005b3bbc in vfs_write (file=file@entry=0xc000000006aa6b00,
    buf=buf@entry=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>,
    count=count@entry=2, pos=pos@entry=0xc00000000670bda0) at fs/read_write.c:582
 #9  0xc0000000005b4264 in ksys_write (fd=<optimized out>,
    buf=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=2)
    at fs/read_write.c:637
 #10 0xc00000000002ea2c in system_call_exception (regs=0xc00000000670be80, r0=<optimized out>)
    at arch/powerpc/kernel/syscall.c:171
 #11 0xc00000000000c270 in system_call_vectored_common ()
    at arch/powerpc/kernel/interrupt_64.S:192

--------

Fixes d16a58f8854b1 ("powerpc: Improve ppc_save_regs()")

---

More information:

This problem with gdb backtrace was discovered while working on a crash tool enhancement to improve crash analysis using gdb passthrough to be able print function arguments and local variables inside crash tool. gdb passthrough simply asks gdb to handle the backtrace printing, where it was noticed that it could not print correct backtrace in some vmcores.

The changes introduced here has an implication on xmon, that it might show one extra xmon frame in backtrace. By looking at older commits it seems that originally the ppc_save_regs function was introduced as xmon_save_regs(). But now the same function has been renamed to ppc_save_regs() and been used in few other places as well.

Tested this patch with multiple ways of crashing:
1. direct panic call (echo c > /proc/sysrq-trigger)
2. null dereference/oops path (the earlier implementation of sysrq_handle_crash)
3. sys reset
4. sys reset inside qemu

Changelog
V3:
- resend as normal patch with Reviewed-by and Fixes tag
RFC V2:
https://lore.kernel.org/linuxppc-dev/[email protected]/T/#mb7c9e73b4ba771f6eba74c7d8e13dbb118619ad2
- fixed bogus LR by storing caller's LR area as pointed out by Naveen and Nick

---
 arch/powerpc/kernel/ppc_save_regs.S | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/powerpc/kernel/ppc_save_regs.S +3 -3
index 49813f982468..a9b9c32d0c1f 100644
@@ -31,10 +31,10 @@ _GLOBAL(ppc_save_regs)
 	lbz	r0,PACAIRQSOFTMASK(r13)
 	PPC_STL	r0,SOFTE(r3)
 #endif
-	/* go up one stack frame for SP */
-	PPC_LL	r4,0(r1)
-	PPC_STL	r4,GPR1(r3)
+	/* store current SP */
+	PPC_STL	r1,GPR1(r3)
 	/* get caller's LR */
+	PPC_LL	r4,0(r1)
 	PPC_LL	r0,LRSAVE(r4)
 	PPC_STL	r0,_LINK(r3)
 	mflr	r0
Signature · 1 line
2.40.1