Skip to contentSkip to conversation

pruhsr-fw: SR2.0: Add new firmware

PATCH In review Ryan Eatmon 3 participants 5 messages Jun 20, 2023 – Jun 21, 2023

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 pruhsr-fw: SR2.0: Add new firmware

We need to package up new HSR firmware for am65x-sr2. Add dependencies for them on the correct platforms.

---
v2: Names of firmware were changed to match existing filenames.

 .../pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb      | 34 +++++++++++++++++++
 .../recipes-kernel/linux/kernel-rdepends.inc  |  4 +--
 2 files changed, 36 insertions(+), 2 deletions(-)
 create mode 100644 meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb
meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb new file +34 -0
new file mode 100644
index 00000000..c31af832
@@ -0,0 +1,34 @@
+SUMMARY = "PRU HSR firmware for AM65xx SR2.0"
+
+require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
+
+PV = "${PRUETH_FW_AM65X_SR2_VERSION}"
+PR = "${INC_PR}.0"
+
+CLEANBROKEN = "1"
+
+COMPATIBLE_MACHINE = "am65xx-evm|am64xx"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+S = "${WORKDIR}/git"
+
+TARGET = " \
+    am65x-sr2-pru0-pruhsr-fw.elf \
+    am65x-sr2-pru1-pruhsr-fw.elf \
+    am65x-sr2-rtu0-pruhsr-fw.elf \
+    am65x-sr2-rtu1-pruhsr-fw.elf \
+    am65x-sr2-txpru0-pruhsr-fw.elf \
+    am65x-sr2-txpru1-pruhsr-fw.elf \
+"
+
+do_install() {
+	install -d ${D}${nonarch_base_libdir}/firmware/ti-pruss
+	for f in ${TARGET}; do
+		install -m 0644 ${S}/ti-pruss/$f ${D}${nonarch_base_libdir}/firmware/ti-pruss/$f
+	done
+}
+
+FILES:${PN} = "${nonarch_base_libdir}/firmware"
+
+INSANE_SKIP:${PN} = "arch"
meta-ti-bsp/recipes-kernel/linux/kernel-rdepends.inc +2 -2
index d2dcc3e5..7c8f3171 100644
@@ -16,8 +16,8 @@ RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am57xx = " prueth-fw prusw-fw pruhsr
 RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:ti43x = " prueth-fw pruhsr-fw pruprp-fw"
 RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:ti33x = " prueth-fw pruhsr-fw pruprp-fw"
 RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am65xx = " prueth-fw-am65x"
-RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am65xx-evm = " prueth-fw-am65x-sr2 prusw-fw-am65x-sr2"
-RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am64xx = " prueth-fw-am65x-sr2"
+RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am65xx-evm = " prueth-fw-am65x-sr2 pruhsr-fw-am65x-sr2 prusw-fw-am65x-sr2"
+RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am64xx = " prueth-fw-am65x-sr2 pruhsr-fw-am65x-sr2"
 
 # Add run-time dependency for Cadence MHDP firmware to the rootfs
 RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:j721e = " cadence-mhdp-fw"
Signature · 1 line
2.17.1
#1 lore raw
Quoted 20 lines · Ryan Eatmon via lists.yoctoproject.org

We need to package up new HSR firmware for am65x-sr2. Add dependencies for them on the correct platforms.

---
v2: Names of firmware were changed to match existing filenames.

  .../pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb      | 34 +++++++++++++++++++
  .../recipes-kernel/linux/kernel-rdepends.inc  |  4 +--
  2 files changed, 36 insertions(+), 2 deletions(-)

create mode 100644 meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb

meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb new file +2 -0
new file mode 100644
index 00000000..c31af832
@@ -0,0 +1,34 @@
+SUMMARY = "PRU HSR firmware for AM65xx SR2.0"
+

meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb line 12

Quoted 10 lines
meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb new file +10 -0
+require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
+
+PV = "${PRUETH_FW_AM65X_SR2_VERSION}"
+PR = "${INC_PR}.0"
+
+CLEANBROKEN = "1"
+
+COMPATIBLE_MACHINE = "am65xx-evm|am64xx"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"

Is this needed? I don't think the package changes based on machine here.

Quoted 48 lines
meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb new file +22 -0
+
+S = "${WORKDIR}/git"
+
+TARGET = " \
+    am65x-sr2-pru0-pruhsr-fw.elf \
+    am65x-sr2-pru1-pruhsr-fw.elf \
+    am65x-sr2-rtu0-pruhsr-fw.elf \
+    am65x-sr2-rtu1-pruhsr-fw.elf \
+    am65x-sr2-txpru0-pruhsr-fw.elf \
+    am65x-sr2-txpru1-pruhsr-fw.elf \
+"
+
+do_install() {
+	install -d ${D}${nonarch_base_libdir}/firmware/ti-pruss
+	for f in ${TARGET}; do
+		install -m 0644 ${S}/ti-pruss/$f ${D}${nonarch_base_libdir}/firmware/ti-pruss/$f
+	done
+}
+
+FILES:${PN} = "${nonarch_base_libdir}/firmware"
+
+INSANE_SKIP:${PN} = "arch"
meta-ti-bsp/recipes-kernel/linux/kernel-rdepends.inc +2 -3
index d2dcc3e5..7c8f3171 100644
@@ -16,8 +16,8 @@ RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am57xx = " prueth-fw prusw-fw pruhsr
  RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:ti43x = " prueth-fw pruhsr-fw pruprp-fw"
  RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:ti33x = " prueth-fw pruhsr-fw pruprp-fw"
  RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am65xx = " prueth-fw-am65x"
-RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am65xx-evm = " prueth-fw-am65x-sr2 prusw-fw-am65x-sr2"
-RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am64xx = " prueth-fw-am65x-sr2"
+RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am65xx-evm = " prueth-fw-am65x-sr2 pruhsr-fw-am65x-sr2 prusw-fw-am65x-sr2"
+RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am64xx = " prueth-fw-am65x-sr2 pruhsr-fw-am65x-sr2"
 
  # Add run-time dependency for Cadence MHDP firmware to the rootfs
  RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:j721e = " cadence-mhdp-fw"
 
 
 
-=-=-=-=-=-=-=-=-=-=-=-

Links: You receive all messages sent to this group.
View/Reply Online (#16754): https://lists.yoctoproject.org/g/meta-ti/message/16754
Mute This Topic: https://lists.yoctoproject.org/mt/99665494/3619733
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/leave/6695306/3619733/2033773410/xyzzy [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

#2 lore raw
Quoted 25 lines · Andrew Davis via lists.yoctoproject.org
Quoted 24 lines · Ryan Eatmon via lists.yoctoproject.org

We need to package up new HSR firmware for am65x-sr2. Add dependencies for them on the correct platforms.

---
v2: Names of firmware were changed to match existing filenames.

 .../pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb      | 34 +++++++++++++++++++
 .../recipes-kernel/linux/kernel-rdepends.inc  |  4 +--
 2 files changed, 36 insertions(+), 2 deletions(-)
 create mode 100644 meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb
meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb new file +6 -0
new file mode 100644
index 00000000..c31af832
@@ -0,0 +1,34 @@
+SUMMARY = "PRU HSR firmware for AM65xx SR2.0"
+
+require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
+
+PV = "${PRUETH_FW_AM65X_SR2_VERSION}"
+PR = "${INC_PR}.0"
Quoted 8 lines

meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb line 12

Quoted 6 lines
meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb new file +6 -0
+
+CLEANBROKEN = "1"
+
+COMPATIBLE_MACHINE = "am65xx-evm|am64xx"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"

Is this needed? I don't think the package changes based on machine here.

Good question. It can be both ways with own pros and cons:

1. Don't make it machine-specific. Either one of am64 or am65 will build the package once and it will be Aarch64-generic. So, same package with the same binaries inside can be used on am64 and am65. But COMPATIBLE_MACHINE is a build-time guard, so nothing prevents installing this Aarch64-generic package on other platforms - will that work? would there be adverse effects?

2. Make it machine-specific (as it is now) - it will be built/packaged twice, separate for am64 and am65, and no other platform will be allowed to build it due to COMPATIBLE_MACHINE. Moreover, at run-time, no other platform will be allowed to even install either of the packages, since they are specific to each of those 2 platforms.

So, you decide which way is the best option in this case...

Quoted 35 lines
Quoted 35 lines
meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb new file +21 -0
+S = "${WORKDIR}/git"
+
+TARGET = " \
+    am65x-sr2-pru0-pruhsr-fw.elf \
+    am65x-sr2-pru1-pruhsr-fw.elf \
+    am65x-sr2-rtu0-pruhsr-fw.elf \
+    am65x-sr2-rtu1-pruhsr-fw.elf \
+    am65x-sr2-txpru0-pruhsr-fw.elf \
+    am65x-sr2-txpru1-pruhsr-fw.elf \
+"
+
+do_install() {
+	install -d ${D}${nonarch_base_libdir}/firmware/ti-pruss
+	for f in ${TARGET}; do
+		install -m 0644 ${S}/ti-pruss/$f ${D}${nonarch_base_libdir}/firmware/ti-pruss/$f
+	done
+}
+
+FILES:${PN} = "${nonarch_base_libdir}/firmware"
+
+INSANE_SKIP:${PN} = "arch"
meta-ti-bsp/recipes-kernel/linux/kernel-rdepends.inc +2 -2
index d2dcc3e5..7c8f3171 100644
@@ -16,8 +16,8 @@ RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am57xx = " prueth-fw prusw-fw pruhsr
 RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:ti43x = " prueth-fw pruhsr-fw pruprp-fw"
 RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:ti33x = " prueth-fw pruhsr-fw pruprp-fw"
 RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am65xx = " prueth-fw-am65x"
-RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am65xx-evm = " prueth-fw-am65x-sr2 prusw-fw-am65x-sr2"
-RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am64xx = " prueth-fw-am65x-sr2"
+RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am65xx-evm = " prueth-fw-am65x-sr2 pruhsr-fw-am65x-sr2 prusw-fw-am65x-sr2"
+RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am64xx = " prueth-fw-am65x-sr2 pruhsr-fw-am65x-sr2"
 # Add run-time dependency for Cadence MHDP firmware to the rootfs
 RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:j721e = " cadence-mhdp-fw"
#3 lore raw
Quoted 35 lines · Denys Dmytriyenko
Quoted 25 lines · Andrew Davis via lists.yoctoproject.org
Quoted 24 lines · Ryan Eatmon via lists.yoctoproject.org

We need to package up new HSR firmware for am65x-sr2. Add dependencies for them on the correct platforms.

---
v2: Names of firmware were changed to match existing filenames.

  .../pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb      | 34 +++++++++++++++++++
  .../recipes-kernel/linux/kernel-rdepends.inc  |  4 +--
  2 files changed, 36 insertions(+), 2 deletions(-)

create mode 100644 meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb

meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb new file +6 -0
new file mode 100644
index 00000000..c31af832
@@ -0,0 +1,34 @@
+SUMMARY = "PRU HSR firmware for AM65xx SR2.0"
+
+require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
+
+PV = "${PRUETH_FW_AM65X_SR2_VERSION}"
+PR = "${INC_PR}.0"
Quoted 8 lines

meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb line 12

Quoted 6 lines
meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb new file +6 -0
+
+CLEANBROKEN = "1"
+
+COMPATIBLE_MACHINE = "am65xx-evm|am64xx"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"

Is this needed? I don't think the package changes based on machine here.

Quoted 8 lines

Good question. It can be both ways with own pros and cons:

1. Don't make it machine-specific. Either one of am64 or am65 will build the package once and it will be Aarch64-generic. So, same package with the same binaries inside can be used on am64 and am65. But COMPATIBLE_MACHINE is a build-time guard, so nothing prevents installing this Aarch64-generic package on other platforms - will that work? would there be adverse effects?

There is no ill effects to installing this on other platforms, they are just firmware blobs put in the firmware dir. No worse than installing a firmware package for hardware you don't have installed (which we all do on our PCs).

I'd even say we should drop COMPATIBLE_MACHINE. Sure this firmware doesn't do anything for machines other than AM65/AM64, but no harm either, so it is not "incompatible". And the job of installing this only on machines that need it is already handled in kernel-rdepends.inc below.

Andrew

Quoted 54 lines

2. Make it machine-specific (as it is now) - it will be built/packaged twice, separate for am64 and am65, and no other platform will be allowed to build it due to COMPATIBLE_MACHINE. Moreover, at run-time, no other platform will be allowed to even install either of the packages, since they are specific to each of those 2 platforms.

So, you decide which way is the best option in this case...

Quoted 45 lines
Quoted 45 lines
meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb new file +21 -0
+S = "${WORKDIR}/git"
+
+TARGET = " \
+    am65x-sr2-pru0-pruhsr-fw.elf \
+    am65x-sr2-pru1-pruhsr-fw.elf \
+    am65x-sr2-rtu0-pruhsr-fw.elf \
+    am65x-sr2-rtu1-pruhsr-fw.elf \
+    am65x-sr2-txpru0-pruhsr-fw.elf \
+    am65x-sr2-txpru1-pruhsr-fw.elf \
+"
+
+do_install() {
+	install -d ${D}${nonarch_base_libdir}/firmware/ti-pruss
+	for f in ${TARGET}; do
+		install -m 0644 ${S}/ti-pruss/$f ${D}${nonarch_base_libdir}/firmware/ti-pruss/$f
+	done
+}
+
+FILES:${PN} = "${nonarch_base_libdir}/firmware"
+
+INSANE_SKIP:${PN} = "arch"
meta-ti-bsp/recipes-kernel/linux/kernel-rdepends.inc +2 -3
index d2dcc3e5..7c8f3171 100644
@@ -16,8 +16,8 @@ RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am57xx = " prueth-fw prusw-fw pruhsr
  RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:ti43x = " prueth-fw pruhsr-fw pruprp-fw"
  RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:ti33x = " prueth-fw pruhsr-fw pruprp-fw"
  RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am65xx = " prueth-fw-am65x"
-RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am65xx-evm = " prueth-fw-am65x-sr2 prusw-fw-am65x-sr2"
-RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am64xx = " prueth-fw-am65x-sr2"
+RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am65xx-evm = " prueth-fw-am65x-sr2 pruhsr-fw-am65x-sr2 prusw-fw-am65x-sr2"
+RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am64xx = " prueth-fw-am65x-sr2 pruhsr-fw-am65x-sr2"
  # Add run-time dependency for Cadence MHDP firmware to the rootfs
  RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:j721e = " cadence-mhdp-fw"
 
 
-=-=-=-=-=-=-=-=-=-=-=-

Links: You receive all messages sent to this group.
View/Reply Online (#16760): https://lists.yoctoproject.org/g/meta-ti/message/16760
Mute This Topic: https://lists.yoctoproject.org/mt/99665494/3619733
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/leave/6695306/3619733/2033773410/xyzzy [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

#4 lore raw
Quoted 46 lines · Andrew Davis
Quoted 36 lines · Denys Dmytriyenko
Quoted 26 lines · Andrew Davis via lists.yoctoproject.org
Quoted 25 lines · Ryan Eatmon via lists.yoctoproject.org

We need to package up new HSR firmware for am65x-sr2.  Add dependencies for them on the correct platforms.

---
v2: Names of firmware were changed to match existing filenames.

  .../pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb      | 34
+++++++++++++++++++
  .../recipes-kernel/linux/kernel-rdepends.inc  |  4 +--

  2 files changed, 36 insertions(+), 2 deletions(-)

  create mode 100644 meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb

meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb new file +6 -0
new file mode 100644
index 00000000..c31af832
@@ -0,0 +1,34 @@
+SUMMARY = "PRU HSR firmware for AM65xx SR2.0"
+
+require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
+
+PV = "${PRUETH_FW_AM65X_SR2_VERSION}"
+PR = "${INC_PR}.0"
Quoted 8 lines

meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb line 12

Quoted 6 lines
meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb new file +6 -0
+
+CLEANBROKEN = "1"
+
+COMPATIBLE_MACHINE = "am65xx-evm|am64xx"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"

Is this needed? I don't think the package changes based on machine here.

Quoted 8 lines

Good question. It can be both ways with own pros and cons:

1. Don't make it machine-specific. Either one of am64 or am65 will build the package once and it will be Aarch64-generic. So, same package with the same binaries inside can be used on am64 and am65. But COMPATIBLE_MACHINE is a build-time guard, so nothing prevents installing this Aarch64-generic package on other platforms - will that work? would there be adverse effects?

Quoted 8 lines

There is no ill effects to installing this on other platforms, they are just firmware blobs put in the firmware dir. No worse than installing a firmware package for hardware you don't have installed (which we all do on our PCs).

I'd even say we should drop COMPATIBLE_MACHINE. Sure this firmware doesn't do anything for machines other than AM65/AM64, but no harm either, so it is not "incompatible". And the job of installing this only on machines that need it is already handled in kernel-rdepends.inc below.

All of these pru recipe should be cleaned up. I just did not want to do that clean up at this time as it involves a lot of files. So I just copied an existing pru recipe for am65 sr2. But I agree, we should clean all of these up in the longer term.

Quoted 62 lines

Andrew

Quoted 60 lines

2. Make it machine-specific (as it is now) - it will be built/packaged twice, separate for am64 and am65, and no other platform will be allowed to build it due to COMPATIBLE_MACHINE. Moreover, at run-time, no other platform will be allowed to even install either of the packages, since they are specific to each of those 2 platforms.

So, you decide which way is the best option in this case...

Quoted 51 lines
Quoted 51 lines
meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb new file +15 -0
+S = "${WORKDIR}/git"
+
+TARGET = " \
+    am65x-sr2-pru0-pruhsr-fw.elf \
+    am65x-sr2-pru1-pruhsr-fw.elf \
+    am65x-sr2-rtu0-pruhsr-fw.elf \
+    am65x-sr2-rtu1-pruhsr-fw.elf \
+    am65x-sr2-txpru0-pruhsr-fw.elf \
+    am65x-sr2-txpru1-pruhsr-fw.elf \
+"
+
+do_install() {
+    install -d ${D}${nonarch_base_libdir}/firmware/ti-pruss
+    for f in ${TARGET}; do
+        install -m 0644 ${S}/ti-pruss/$f 

${D}${nonarch_base_libdir}/firmware/ti-pruss/$f
+    done

meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_am65x-sr2_git.bb new file +5 -0
+}
+
+FILES:${PN} = "${nonarch_base_libdir}/firmware"
+
+INSANE_SKIP:${PN} = "arch"
meta-ti-bsp/recipes-kernel/linux/kernel-rdepends.inc +0 -0
index d2dcc3e5..7c8f3171 100644
@@ -16,8 +16,8 @@ RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am57xx 

= " prueth-fw prusw-fw pruhsr RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:ti43x = " prueth-fw pruhsr-fw pruprp-fw" RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:ti33x = " prueth-fw pruhsr-fw pruprp-fw" RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am65xx = " prueth-fw-am65x" -RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am65xx-evm = " prueth-fw-am65x-sr2 prusw-fw-am65x-sr2" -RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am64xx = " prueth-fw-am65x-sr2" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am65xx-evm = " prueth-fw-am65x-sr2 pruhsr-fw-am65x-sr2 prusw-fw-am65x-sr2" +RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:am64xx = " prueth-fw-am65x-sr2 pruhsr-fw-am65x-sr2"
  # Add run-time dependency for Cadence MHDP firmware to the rootfs RDEPENDS:${KERNEL_PACKAGE_NAME}-base:append:j721e = " cadence-mhdp-fw"

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#16760): https://lists.yoctoproject.org/g/meta-ti/message/16760
Mute This Topic: https://lists.yoctoproject.org/mt/99665494/3619733
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/leave/6695306/3619733/2033773410/xyzzy [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

Signature · 3 lines
Ryan Eatmon                [email protected]
-----------------------------------------
Texas Instruments, Inc.  -  LCPD  -  MGTS