f_flower: add cfm support
Subsystems (3)
PATCH v3 1/1 f_flower: add cfm support
From: Zahari Doychev <[email protected]>
Add support for matching on CFM Maintenance Domain level and opcode.
# tc filter add dev ens6 ingress pref 1 proto cfm \
flower cfm op 1 mdl 5 action ok # tc filter show dev ens6 ingress
filter protocol cfm pref 1 flower chain 0
filter protocol cfm pref 1 flower chain 0 handle 0x1
eth_type 8902
cfm mdl 5 op 1
not_in_hw
action order 1: gact action pass
random type none pass val 0
index 1 ref 1 bind 1 # tc -j -p filter show dev ens6 ingress
[ {
"protocol": "cfm",
"pref": 1,
"kind": "flower",
"chain": 0
},{
"protocol": "cfm",
"pref": 1,
"kind": "flower",
"chain": 0,
"options": {
"handle": 1,
"keys": {
"eth_type": "8902",
"cfm": {
"mdl": 5,
"op": 1
}
},
"not_in_hw": true,
"actions": [ {
"order": 1,
"kind": "gact",
"control_action": {
"type": "pass"
},
"prob": {
"random_type": "none",
"control_action": {
"type": "pass"
},
"val": 0
},
"index": 1,
"ref": 1,
"bind": 1
} ]
}
} ]Signed-off-by Zahari Doychev <[email protected]>
Reviewed-by Ido Schimmel <[email protected]>
---
v1->v2:
- replace matches with strcmp
v2->v3
- don't change uapi header file
- remove empty lines
lib/ll_proto.c | 1 + man/man8/tc-flower.8 | 29 ++++++++++++- tc/f_flower.c | 96 +++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 124 insertions(+), 2 deletions(-)
lib/ll_proto.c +1 -0
@@ -78,6 +78,7 @@ __PF(8021AD,802.1ad) __PF(MPLS_UC,mpls_uc) __PF(MPLS_MC,mpls_mc) __PF(TEB,teb) +__PF(CFM,cfm) { 0x8100, "802.1Q" }, { 0x88cc, "LLDP" },
man/man8/tc-flower.8 +28 -1
@@ -102,7 +102,9 @@ flower \- flow based traffic control filter .BR ip_flags .IR IP_FLAGS " | " .B l2_miss -.IR L2_MISS " }" +.IR L2_MISS " | " +.BR cfm +.IR CFM_OPTIONS " }" .ti -8 .IR LSE_LIST " := [ " LSE_LIST " ] " LSE
@@ -120,6 +122,13 @@ flower \- flow based traffic control filter .B ttl .IR TTL " }" +.ti -8 +.IR CFM " := " +.B cfm mdl +.IR LEVEL " | " +.B op +.IR OPCODE " + .SH DESCRIPTION The .B flower
@@ -496,11 +505,29 @@ fragmented packet. firstfrag can be used to indicate the first fragmented packet. nofirstfrag can be used to indicates subsequent fragmented packets or non-fragmented packets. .TP + .BI l2_miss " L2_MISS" Match on layer 2 miss in the bridge driver's FDB / MDB. \fIL2_MISS\fR may be 0 or 1. When 1, match on packets that encountered a layer 2 miss. When 0, match on packets that were forwarded using an FDB / MDB entry. Note that broadcast packets do not encounter a miss since a lookup is not performed for them. +.TP + +.BI cfm " CFM_OPTIONS" +Match on Connectivity Fault Management (CFM) fields. +.I CFM_OPTIONS +is a list of options that describe the properties of the CFM information +fields to match. +.RS +.TP +.BI mdl " LEVEL " +Match on the Maintenance Domain (MD) level field. +\fILEVEL\fR is an unsigned 3 bit value in decimal format. +.TP +.BI op " OPCODE " +Match on the CFM opcode field. \fIOPCODE\fR is an unsigned 8 bit value in +decimal format. + .SH NOTES As stated above where applicable, matches of a certain layer implicitly depend on the matches of the next lower layer. Precisely, layer one and two matches
tc/f_flower.c +95 -1
131 lines not on this page · raw message
Signature · 1 line
2.41.0
This patch was applied to iproute2/iproute2-next.git (main) by David Ahern <[email protected]>:
Hello:
This patch was applied to iproute2/iproute2-next.git (main) by David Ahern <[email protected]>:
Quoted 8 lines · On Wed, 21 Jun 2023 22:55:45 +0200 you wrote:
From: Zahari Doychev <[email protected]>
Add support for matching on CFM Maintenance Domain level and opcode.
# tc filter add dev ens6 ingress pref 1 proto cfm \ flower cfm op 1 mdl 5 action ok[...]
Here is the summary with links:
- [iproute2-next,v3] f_flower: add cfm support
https://git.kernel.org/pub/scm/network/iproute2/iproute2-next.git/commit/?id=5295b8f38e31
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html