Skip to contentSkip to conversation

FAILED: patch "[PATCH] PCI: hv: Add a per-bus mutex state_lock" failed to apply to 5.10-stable tree

PATCH [email protected] 1 participant 1 message Jun 23, 2023

Subsystems (4)
Stable branch PCI PCI native host bridge and endpoint drivers Hyper-V/Azure core and drivers
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 067d6ec7ed5b49380688e06c1e5f883a71bef4fe
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2023062346-consuming-staunch-e0a5@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 067d6ec7ed5b49380688e06c1e5f883a71bef4fe Mon Sep 17 00:00:00 2001
From: Dexuan Cui <[email protected]>
Date: Wed, 14 Jun 2023 21:44:51 -0700
Subject: [PATCH] PCI: hv: Add a per-bus mutex state_lock

In the case of fast device addition/removal, it's possible that hv_eject_device_work() can start to run before create_root_hv_pci_bus() starts to run; as a result, the pci_get_domain_bus_and_slot() in hv_eject_device_work() can return a 'pdev' of NULL, and hv_eject_device_work() can remove the 'hpdev', and immediately send a message PCI_EJECTION_COMPLETE to the host, and the host immediately unassigns the PCI device from the guest; meanwhile, create_root_hv_pci_bus() and the PCI device driver can be probing the dead PCI device and reporting timeout errors.

Fix the issue by adding a per-bus mutex 'state_lock' and grabbing the mutex before powering on the PCI bus in hv_pci_enter_d0(): when hv_eject_device_work() starts to run, it's able to find the 'pdev' and call pci_stop_and_remove_bus_device(pdev): if the PCI device driver has loaded, the PCI device driver's probe() function is already called in create_root_hv_pci_bus() -> pci_bus_add_devices(), and now hv_eject_device_work() -> pci_stop_and_remove_bus_device() is able to call the PCI device driver's remove() function and remove the device reliably; if the PCI device driver hasn't loaded yet, the function call hv_eject_device_work() -> pci_stop_and_remove_bus_device() is able to remove the PCI device reliably and the PCI device driver's probe() function won't be called; if the PCI device driver's probe() is already running (e.g., systemd-udev is loading the PCI device driver), it must be holding the per-device lock, and after the probe() finishes and releases the lock, hv_eject_device_work() -> pci_stop_and_remove_bus_device() is able to proceed to remove the device reliably.

Fixes 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by Dexuan Cui <[email protected]>
Reviewed-by Michael Kelley <[email protected]>
Acked-by Lorenzo Pieralisi <[email protected]>
Cc [email protected]
Link https://lore.kernel.org/r/[email protected] open here
Signed-off-by Wei Liu <[email protected]>
drivers/pci/controller/pci-hyperv.c +26 -3
index 1a5296fad1c4..2d93d0c4f10d 100644
@@ -489,7 +489,10 @@ struct hv_pcibus_device {
 	struct fwnode_handle *fwnode;
 	/* Protocol version negotiated with the host */
 	enum pci_protocol_version_t protocol_version;
+
+	struct mutex state_lock;
 	enum hv_pcibus_state state;
+
 	struct hv_device *hdev;
 	resource_size_t low_mmio_space;
 	resource_size_t high_mmio_space;

@@ -2605,6 +2608,8 @@ static void pci_devices_present_work(struct work_struct *work)
 	if (!dr)
 		return;
 
+	mutex_lock(&hbus->state_lock);
+
 	/* First, mark all existing children as reported missing. */
 	spin_lock_irqsave(&hbus->device_list_lock, flags);
 	list_for_each_entry(hpdev, &hbus->children, list_entry) {

@@ -2686,6 +2691,8 @@ static void pci_devices_present_work(struct work_struct *work)
 		break;
 	}
 
+	mutex_unlock(&hbus->state_lock);
+
 	kfree(dr);
 }
 

@@ -2834,6 +2841,8 @@ static void hv_eject_device_work(struct work_struct *work)
 	hpdev = container_of(work, struct hv_pci_dev, wrk);
 	hbus = hpdev->hbus;
 
+	mutex_lock(&hbus->state_lock);
+
 	/*
 	 * Ejection can come before or after the PCI bus has been set up, so
 	 * attempt to find it and tear down the bus state, if it exists.  This

@@ -2870,6 +2879,8 @@ static void hv_eject_device_work(struct work_struct *work)
 	put_pcichild(hpdev);
 	put_pcichild(hpdev);
 	/* hpdev has been freed. Do not use it any more. */
+
+	mutex_unlock(&hbus->state_lock);
 }
 
 /**

@@ -3636,6 +3647,7 @@ static int hv_pci_probe(struct hv_device *hdev,
 		return -ENOMEM;
 
 	hbus->bridge = bridge;
+	mutex_init(&hbus->state_lock);
 	hbus->state = hv_pcibus_init;
 	hbus->wslot_res_allocated = -1;
 

@@ -3745,9 +3757,11 @@ static int hv_pci_probe(struct hv_device *hdev,
 	if (ret)
 		goto free_irq_domain;
 
+	mutex_lock(&hbus->state_lock);
+
 	ret = hv_pci_enter_d0(hdev);
 	if (ret)
-		goto free_irq_domain;
+		goto release_state_lock;
 
 	ret = hv_pci_allocate_bridge_windows(hbus);
 	if (ret)

@@ -3765,12 +3779,15 @@ static int hv_pci_probe(struct hv_device *hdev,
 	if (ret)
 		goto free_windows;
 
+	mutex_unlock(&hbus->state_lock);
 	return 0;
 
 free_windows:
 	hv_pci_free_bridge_windows(hbus);
 exit_d0:
 	(void) hv_pci_bus_exit(hdev, true);
+release_state_lock:
+	mutex_unlock(&hbus->state_lock);
 free_irq_domain:
 	irq_domain_remove(hbus->irq_domain);
 free_fwnode:

@@ -4020,20 +4037,26 @@ static int hv_pci_resume(struct hv_device *hdev)
 	if (ret)
 		goto out;
 
+	mutex_lock(&hbus->state_lock);
+
 	ret = hv_pci_enter_d0(hdev);
 	if (ret)
-		goto out;
+		goto release_state_lock;
 
 	ret = hv_send_resources_allocated(hdev);
 	if (ret)
-		goto out;
+		goto release_state_lock;
 
 	prepopulate_bars(hbus);
 
 	hv_pci_restore_msi_state(hbus);
 
 	hbus->state = hv_pcibus_installed;
+	mutex_unlock(&hbus->state_lock);
 	return 0;
+
+release_state_lock:
+	mutex_unlock(&hbus->state_lock);
 out:
 	vmbus_close(hdev->channel);
 	return ret;