Skip to contentSkip to conversation

Fix the problem that rxe can not work in net

PATCH New Zhu Yanjun 1 participant 9 messages Jun 24, 2023

Subsystems (2)
lore
Share & tools
lore

Zhu Yanjun

author
#0 lore raw

v7 cover Fix the problem that rxe can not work in net

From: Zhu Yanjun <[email protected]>

When run "ip link add" command to add a rxe rdma link in a net namespace, normally this rxe rdma link can not work in a net name space.

The root cause is that a sock listening on udp port 4791 is created in init_net when the rdma_rxe module is loaded into kernel. That is, the sock listening on udp port 4791 is created in init_net. Other net namespace is difficult to use this sock.

The following commits will solve this problem.

In the first commit, move the creating sock listening on udp port 4791 from module_init function to rdma link creating functions. That is, after the module rdma_rxe is loaded, the sock will not be created. When run "rdma link add ..." command, the sock will be created. So when creating a rdma link in the net namespace, the sock will be created in this net namespace.

In the second commit, the functions udp4_lib_lookup and udp6_lib_lookup will check the sock exists in the net namespace or not. If yes, rdma link will increase the reference count of this sock, then continue other jobs instead of creating a new sock to listen on udp port 4791. Since the network notifier is global, when the module rdma_rxe is loaded, this notifier will be registered.

After the rdma link is created, the command "rdma link del" is to delete rdma link at the same time the sock is checked. If the reference count of this sock is greater than the sock reference count needed by udp tunnel, the sock reference count is decreased by one. If equal, it indicates that this rdma link is the last one. As such, the udp tunnel is shut down and the sock is closed. The above work should be implemented in linkdel function. But currently no dellink function in rxe. So the 3rd commit addes dellink function pointer. And the 4th commit implements the dellink function in rxe.

To now, it is not necessary to keep a global variable to store the sock listening udp port 4791. This global variable can be replaced by the functions udp4_lib_lookup and udp6_lib_lookup totally. Because the function udp6_lib_lookup is in the fast path, a member variable l_sk6 is added to store the sock. If l_sk6 is NULL, udp6_lib_lookup is called to lookup the sock, then the sock is stored in l_sk6, in the future,it can be used directly.

All the above work has been done in init_net. And it can also work in the net namespace. So the init_net is replaced by the individual net namespace. This is what the 6th commit does. Because rxe device is dependent on the net device and the sock listening on udp port 4791, every rxe device is in exclusive mode in the individual net namespace. Other rdma netns operations will be considerred in the future.

In the 7th commit, the register_pernet_subsys/unregister_pernet_subsys functions are added. When a new net namespace is created, the init function will initialize the sk4 and sk6 socks. Then the 2 socks will be released when the net namespace is destroyed. The functions rxe_ns_pernet_sk4/rxe_ns_pernet_set_sk4 will get and set sk4 in the net namespace. The functions rxe_ns_pernet_sk6/rxe_ns_pernet_set_sk6 will handle sk6. Then sk4 and sk6 are used in the previous commits.

As the sk4 and sk6 in pernet namespace can be accessed, it is not necessary to add a new l_sk6. As such, in the 8th commit, the l_sk6 is replaced with the sk6 in pernet namespace.

Test steps:
1) Suppose that 2 NICs are in 2 different net namespaces.

  # ip netns exec net0 ip link
  3: eno2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
     link/ether 00:1e:67:a0:22:3f brd ff:ff:ff:ff:ff:ff
     altname enp5s0
  # ip netns exec net1 ip link
  4: eno3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel
     link/ether f8:e4:3b:3b:e4:10 brd ff:ff:ff:ff:ff:ff

2) Add rdma link in the different net namespace
net0:
# ip netns exec net0 rdma link add rxe0 type rxe netdev eno2

net1:
# ip netns exec net1 rdma link add rxe1 type rxe netdev eno3

3) Run rping test.

    net0
    # ip netns exec net0 rping -s -a 192.168.2.1 -C 1&
    [1] 1737
    # ip netns exec net1 rping -c -a 192.168.2.1 -d -v -C 1
    verbose
    count 1
    ...
    ping data: rdma-ping-0: ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqr
    ...

4) Remove the rdma links from the net namespaces.
net0:
# ip netns exec net0 ss -lu
State Recv-Q Send-Q Local Address:Port Peer Address:Port Process
UNCONN 0 0 0.0.0.0:4791 0.0.0.0:*
UNCONN 0 0 [::]:4791 [::]:*

# ip netns exec net0 rdma link del rxe0

# ip netns exec net0 ss -lu
State Recv-Q Send-Q Local Address:Port Peer Address:Port Process

net1:
# ip netns exec net0 ss -lu
State Recv-Q Send-Q Local Address:Port Peer Address:Port Process
UNCONN 0 0 0.0.0.0:4791 0.0.0.0:*
UNCONN 0 0 [::]:4791 [::]:*

# ip netns exec net1 rdma link del rxe1

# ip netns exec net0 ss -lu
State Recv-Q Send-Q Local Address:Port Peer Address:Port Process

V6->V7: Fix the crash problem for drivers like siw.

V5->V6: Fix resource leak problem when rxe_net_init fails. And fix some
style problems.

V4->V5: Rebase the commits to V6.4-rc1

V3->V4: Rebase the commits to rdma-next;

V2->V3: 1) Add "rdma link del" example in the cover letter, and use "ss -lu" to
verify rdma link is removed.
2) Add register_pernet_subsys/unregister_pernet_subsys net namespace
3) Replace l_sk6 with sk6 of pernet_name_space

V1->V2: Add the explicit initialization of sk6.

Zhu Yanjun (8):
RDMA/rxe: Creating listening sock in newlink function RDMA/rxe: Support more rdma links in init_net RDMA/nldev: Add dellink function pointer
RDMA/rxe: Implement dellink in rxe
RDMA/rxe: Replace global variable with sock lookup functions RDMA/rxe: add the support of net namespace RDMA/rxe: Add the support of net namespace notifier RDMA/rxe: Replace l_sk6 with sk6 in net namespace

 drivers/infiniband/core/nldev.c     |   6 ++
 drivers/infiniband/sw/rxe/Makefile  |   3 +-
 drivers/infiniband/sw/rxe/rxe.c     |  35 +++++++-
 drivers/infiniband/sw/rxe/rxe_net.c | 119 ++++++++++++++++++------
 drivers/infiniband/sw/rxe/rxe_net.h |   9 +-
 drivers/infiniband/sw/rxe/rxe_ns.c  | 134 ++++++++++++++++++++++++++++
 drivers/infiniband/sw/rxe/rxe_ns.h  |  17 ++++
 include/rdma/rdma_netlink.h         |   2 +
 8 files changed, 285 insertions(+), 40 deletions(-)
 create mode 100644 drivers/infiniband/sw/rxe/rxe_ns.c
 create mode 100644 drivers/infiniband/sw/rxe/rxe_ns.h
Signature · 1 line
2.27.0
author
#1 lore raw

PATCH v7 1/8 RDMA/rxe: Creating listening sock in newlink function

From: Zhu Yanjun <[email protected]>

Originally when the module rdma_rxe is loaded, the sock listening on udp port 4791 is created. Currently moving the creating listening port to newlink function.

So when running "rdma link add" command, the sock listening on udp port 4791 is created.

---
 drivers/infiniband/sw/rxe/rxe.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
drivers/infiniband/sw/rxe/rxe.c +4 -6
index 7a7e713de52d..89b24bc34299 100644
@@ -194,6 +194,10 @@ static int rxe_newlink(const char *ibdev_name, struct net_device *ndev)
 		goto err;
 	}
 
+	err = rxe_net_init();
+	if (err)
+		return err;
+
 	err = rxe_net_add(ibdev_name, ndev);
 	if (err) {
 		rxe_err("failed to add %s\n", ndev->name);
@@ -210,12 +214,6 @@ static struct rdma_link_ops rxe_link_ops = {
 
 static int __init rxe_module_init(void)
 {
-	int err;
-
-	err = rxe_net_init();
-	if (err)
-		return err;
-
 	rdma_link_register(&rxe_link_ops);
 	pr_info("loaded\n");
 	return 0;
Signature · 1 line
2.27.0
author
#2 lore raw

PATCH v7 2/8 RDMA/rxe: Support more rdma links in init_net

In reply to Zhu Yanjun

From: Zhu Yanjun <[email protected]>

In init_net, when several rdma links are created with the command "rdma link add", newlink will check whether the udp port 4791 is listening or not.
If not, creating a sock listening on udp port 4791. If yes, increasing the reference count of the sock.

---
 drivers/infiniband/sw/rxe/rxe.c     | 12 ++++++-
 drivers/infiniband/sw/rxe/rxe_net.c | 55 +++++++++++++++++++++--------
 drivers/infiniband/sw/rxe/rxe_net.h |  1 +
 3 files changed, 52 insertions(+), 16 deletions(-)
drivers/infiniband/sw/rxe/rxe.c +11 -1
index 89b24bc34299..c15d3c5d7a6f 100644
@@ -8,6 +8,7 @@
 #include <net/addrconf.h>
 #include "rxe.h"
 #include "rxe_loc.h"
+#include "rxe_net.h"
 
 MODULE_AUTHOR("Bob Pearson, Frank Zago, John Groves, Kamal Heib");
 MODULE_DESCRIPTION("Soft RDMA transport");
@@ -207,14 +208,23 @@ static int rxe_newlink(const char *ibdev_name, struct net_device *ndev)
 	return err;
 }
 
-static struct rdma_link_ops rxe_link_ops = {
+struct rdma_link_ops rxe_link_ops = {
 	.type = "rxe",
 	.newlink = rxe_newlink,
 };
 
 static int __init rxe_module_init(void)
 {
+	int err;
+
 	rdma_link_register(&rxe_link_ops);
+
+	err = rxe_register_notifier();
+	if (err) {
+		pr_err("Failed to register netdev notifier\n");
+		return -1;
+	}
+
 	pr_info("loaded\n");
 	return 0;
 }
drivers/infiniband/sw/rxe/rxe_net.c +40 -15

96 lines not on this page · raw message

drivers/infiniband/sw/rxe/rxe_net.h +1 -0
index 45d80d00f86b..a222c3eeae12 100644
@@ -18,6 +18,7 @@ struct rxe_recv_sockets {
 
 int rxe_net_add(const char *ibdev_name, struct net_device *ndev);
 
+int rxe_register_notifier(void);
 int rxe_net_init(void);
 void rxe_net_exit(void);
 
Signature · 1 line
2.27.0
author
#3 lore raw

PATCH v7 3/8 RDMA/nldev: Add dellink function pointer

In reply to Zhu Yanjun

From: Zhu Yanjun <[email protected]>

The newlink function pointer is added. And the sock listening on port 4791 is added in the newlink function. So the dellink function is needed to remove the sock.

---
 drivers/infiniband/core/nldev.c | 6 ++++++
 include/rdma/rdma_netlink.h     | 2 ++
 2 files changed, 8 insertions(+)
drivers/infiniband/core/nldev.c +6 -0
index d5d3e4f0de77..60baf306043f 100644
@@ -1758,6 +1758,12 @@ static int nldev_dellink(struct sk_buff *skb, struct nlmsghdr *nlh,
 		return -EINVAL;
 	}
 
+	if (device->link_ops && device->link_ops->dellink) {
+		err = device->link_ops->dellink(device);
+		if (err)
+			return err;
+	}
+
 	ib_unregister_device_and_put(device);
 	return 0;
 }
include/rdma/rdma_netlink.h +2 -0
index c2a79aeee113..bf9df004061f 100644
@@ -5,6 +5,7 @@
 
 #include <linux/netlink.h>
 #include <uapi/rdma/rdma_netlink.h>
+#include <rdma/ib_verbs.h>
 
 enum {
 	RDMA_NLDEV_ATTR_EMPTY_STRING = 1,
@@ -114,6 +115,7 @@ struct rdma_link_ops {
 	struct list_head list;
 	const char *type;
 	int (*newlink)(const char *ibdev_name, struct net_device *ndev);
+	int (*dellink)(struct ib_device *dev);
 };
 
 void rdma_link_register(struct rdma_link_ops *ops);
Signature · 1 line
2.27.0
author
#4 lore raw

PATCH v7 4/8 RDMA/rxe: Implement dellink in rxe

In reply to Zhu Yanjun

From: Zhu Yanjun <[email protected]>

When running "rdma link del" command, dellink function will be called. If the sock refcnt is greater than the refcnt needed for udp tunnel, the sock refcnt will be decreased by 1.

If equal, the last rdma link is removed. The udp tunnel will be destroyed.

---
 drivers/infiniband/sw/rxe/rxe.c     | 12 +++++++++++-
 drivers/infiniband/sw/rxe/rxe_net.c | 17 +++++++++++++++--
 drivers/infiniband/sw/rxe/rxe_net.h |  1 +
 3 files changed, 27 insertions(+), 3 deletions(-)
drivers/infiniband/sw/rxe/rxe.c +11 -1
index c15d3c5d7a6f..ac7e7b0a9dc9 100644
@@ -168,10 +168,12 @@ void rxe_set_mtu(struct rxe_dev *rxe, unsigned int ndev_mtu)
 /* called by ifc layer to create new rxe device.
  * The caller should allocate memory for rxe by calling ib_alloc_device.
  */
+static struct rdma_link_ops rxe_link_ops;
 int rxe_add(struct rxe_dev *rxe, unsigned int mtu, const char *ibdev_name)
 {
 	rxe_init(rxe);
 	rxe_set_mtu(rxe, mtu);
+	rxe->ib_dev.link_ops = &rxe_link_ops;
 
 	return rxe_register_device(rxe, ibdev_name);
 }
@@ -208,9 +210,17 @@ static int rxe_newlink(const char *ibdev_name, struct net_device *ndev)
 	return err;
 }
 
-struct rdma_link_ops rxe_link_ops = {
+static int rxe_dellink(struct ib_device *dev)
+{
+	rxe_net_del(dev);
+
+	return 0;
+}
+
+static struct rdma_link_ops rxe_link_ops = {
 	.type = "rxe",
 	.newlink = rxe_newlink,
+	.dellink = rxe_dellink,
 };
 
 static int __init rxe_module_init(void)
drivers/infiniband/sw/rxe/rxe_net.c +15 -2
index 8bdf1b24a3ac..632c0a5fcadb 100644
@@ -540,6 +540,21 @@ int rxe_net_add(const char *ibdev_name, struct net_device *ndev)
 	return 0;
 }
 
+#define SK_REF_FOR_TUNNEL	2
+void rxe_net_del(struct ib_device *dev)
+{
+	if (refcount_read(&recv_sockets.sk6->sk->sk_refcnt) > SK_REF_FOR_TUNNEL)
+		__sock_put(recv_sockets.sk6->sk);
+	else
+		rxe_release_udp_tunnel(recv_sockets.sk6);
+
+	if (refcount_read(&recv_sockets.sk4->sk->sk_refcnt) > SK_REF_FOR_TUNNEL)
+		__sock_put(recv_sockets.sk4->sk);
+	else
+		rxe_release_udp_tunnel(recv_sockets.sk4);
+}
+#undef SK_REF_FOR_TUNNEL
+
 static void rxe_port_event(struct rxe_dev *rxe,
 			   enum ib_event_type event)
 {
@@ -699,8 +714,6 @@ int rxe_register_notifier(void)
 
 void rxe_net_exit(void)
 {
-	rxe_release_udp_tunnel(recv_sockets.sk6);
-	rxe_release_udp_tunnel(recv_sockets.sk4);
 	unregister_netdevice_notifier(&rxe_net_notifier);
 }
 
drivers/infiniband/sw/rxe/rxe_net.h +1 -0
index a222c3eeae12..f48f22f3353b 100644
@@ -17,6 +17,7 @@ struct rxe_recv_sockets {
 };
 
 int rxe_net_add(const char *ibdev_name, struct net_device *ndev);
+void rxe_net_del(struct ib_device *dev);
 
 int rxe_register_notifier(void);
 int rxe_net_init(void);
Signature · 1 line
2.27.0
author
#5 lore raw

PATCH v7 5/8 RDMA/rxe: Replace global variable with sock lookup functions

In reply to Zhu Yanjun

From: Zhu Yanjun <[email protected]>

Originally a global variable is to keep the sock of udp listening on port 4791. In fact, sock lookup functions can be used to get the sock.

---
 drivers/infiniband/sw/rxe/rxe.c       |  1 +
 drivers/infiniband/sw/rxe/rxe_net.c   | 58 ++++++++++++++++++++-------
 drivers/infiniband/sw/rxe/rxe_net.h   |  5 ---
 drivers/infiniband/sw/rxe/rxe_verbs.h |  1 +
 4 files changed, 45 insertions(+), 20 deletions(-)
drivers/infiniband/sw/rxe/rxe.c +1 -0
index ac7e7b0a9dc9..c9b3125b26d0 100644
@@ -74,6 +74,7 @@ static void rxe_init_device_param(struct rxe_dev *rxe)
 			rxe->ndev->dev_addr);
 
 	rxe->max_ucontext			= RXE_MAX_UCONTEXT;
+	rxe->l_sk6				= NULL;
 }
 
 /* initialize port attributes */
drivers/infiniband/sw/rxe/rxe_net.c +43 -15

107 lines not on this page · raw message

drivers/infiniband/sw/rxe/rxe_net.h +0 -5
index f48f22f3353b..027b20e1bab6 100644
@@ -11,11 +11,6 @@
 #include <net/if_inet6.h>
 #include <linux/module.h>
 
-struct rxe_recv_sockets {
-	struct socket *sk4;
-	struct socket *sk6;
-};
-
 int rxe_net_add(const char *ibdev_name, struct net_device *ndev);
 void rxe_net_del(struct ib_device *dev);
 
drivers/infiniband/sw/rxe/rxe_verbs.h +1 -0
index 26a20f088692..0aa3817770a5 100644
@@ -382,6 +382,7 @@ struct rxe_dev {
 
 	struct rxe_port		port;
 	struct crypto_shash	*tfm;
+	struct socket		*l_sk6;
 };
 
 static inline void rxe_counter_inc(struct rxe_dev *rxe, enum rxe_counters index)
Signature · 1 line
2.27.0
author
#6 lore raw

PATCH v7 6/8 RDMA/rxe: add the support of net namespace

In reply to Zhu Yanjun

From: Zhu Yanjun <[email protected]>

Originally init_net is used to indicate the current net namespace. Currently more net namespaces are supported.

---
 drivers/infiniband/sw/rxe/rxe.c     |  2 +-
 drivers/infiniband/sw/rxe/rxe_net.c | 33 +++++++++++++++++------------
 drivers/infiniband/sw/rxe/rxe_net.h |  2 +-
 3 files changed, 22 insertions(+), 15 deletions(-)
drivers/infiniband/sw/rxe/rxe.c +1 -1
index c9b3125b26d0..ef632be05e38 100644
@@ -198,7 +198,7 @@ static int rxe_newlink(const char *ibdev_name, struct net_device *ndev)
 		goto err;
 	}
 
-	err = rxe_net_init();
+	err = rxe_net_init(ndev);
 	if (err)
 		return err;
 
drivers/infiniband/sw/rxe/rxe_net.c +20 -13
index 3c8cb82d2ee5..7f9b2e69f3da 100644
@@ -32,7 +32,7 @@ static struct dst_entry *rxe_find_route4(struct rxe_qp *qp,
 	memcpy(&fl.daddr, daddr, sizeof(*daddr));
 	fl.flowi4_proto = IPPROTO_UDP;
 
-	rt = ip_route_output_key(&init_net, &fl);
+	rt = ip_route_output_key(dev_net(ndev), &fl);
 	if (IS_ERR(rt)) {
 		rxe_dbg_qp(qp, "no route to %pI4\n", &daddr->s_addr);
 		return NULL;
@@ -56,7 +56,8 @@ static struct dst_entry *rxe_find_route6(struct rxe_qp *qp,
 		struct sock *sk;
 
 		rcu_read_lock();
-		sk = udp6_lib_lookup(&init_net, NULL, 0, &in6addr_any, htons(ROCE_V2_UDP_DPORT), 0);
+		sk = udp6_lib_lookup(dev_net(ndev), NULL, 0, &in6addr_any,
+				     htons(ROCE_V2_UDP_DPORT), 0);
 		rcu_read_unlock();
 		if (!sk) {
 			rxe_dbg_qp(qp, "file: %s +%d, error\n", __FILE__, __LINE__);
@@ -559,9 +560,13 @@ int rxe_net_add(const char *ibdev_name, struct net_device *ndev)
 void rxe_net_del(struct ib_device *dev)
 {
 	struct sock *sk;
+	struct rxe_dev *rxe;
+
+	rxe = container_of(dev, struct rxe_dev, ib_dev);
 
 	rcu_read_lock();
-	sk = udp4_lib_lookup(&init_net, 0, 0, htonl(INADDR_ANY), htons(ROCE_V2_UDP_DPORT), 0);
+	sk = udp4_lib_lookup(dev_net(rxe->ndev), 0, 0, htonl(INADDR_ANY),
+			     htons(ROCE_V2_UDP_DPORT), 0);
 	rcu_read_unlock();
 	if (!sk)
 		return;
@@ -574,7 +579,8 @@ void rxe_net_del(struct ib_device *dev)
 		rxe_release_udp_tunnel(sk->sk_socket);
 
 	rcu_read_lock();
-	sk = udp6_lib_lookup(&init_net, NULL, 0, &in6addr_any, htons(ROCE_V2_UDP_DPORT), 0);
+	sk = udp6_lib_lookup(dev_net(rxe->ndev), NULL, 0, &in6addr_any,
+			     htons(ROCE_V2_UDP_DPORT), 0);
 	rcu_read_unlock();
 	if (!sk)
 		return;
@@ -646,6 +652,7 @@ static int rxe_notify(struct notifier_block *not_blk,
 	switch (event) {
 	case NETDEV_UNREGISTER:
 		ib_unregister_device_queued(&rxe->ib_dev);
+		rxe_net_del(&rxe->ib_dev);
 		break;
 	case NETDEV_UP:
 		rxe_port_up(rxe);
@@ -679,19 +686,19 @@ static struct notifier_block rxe_net_notifier = {
 	.notifier_call = rxe_notify,
 };
 
-static int rxe_net_ipv4_init(void)
+static int rxe_net_ipv4_init(struct net_device *ndev)
 {
 	struct sock *sk;
 	struct socket *sock;
 
 	rcu_read_lock();
-	sk = udp4_lib_lookup(&init_net, 0, 0, htonl(INADDR_ANY),
+	sk = udp4_lib_lookup(dev_net(ndev), 0, 0, htonl(INADDR_ANY),
 			     htons(ROCE_V2_UDP_DPORT), 0);
 	rcu_read_unlock();
 	if (sk)
 		return 0;
 
-	sock = rxe_setup_udp_tunnel(&init_net, htons(ROCE_V2_UDP_DPORT), false);
+	sock = rxe_setup_udp_tunnel(dev_net(ndev), htons(ROCE_V2_UDP_DPORT), false);
 	if (IS_ERR(sock)) {
 		pr_err("Failed to create IPv4 UDP tunnel\n");
 		return -1;
@@ -700,20 +707,20 @@ static int rxe_net_ipv4_init(void)
 	return 0;
 }
 
-static int rxe_net_ipv6_init(void)
+static int rxe_net_ipv6_init(struct net_device *ndev)
 {
 #if IS_ENABLED(CONFIG_IPV6)
 	struct sock *sk;
 	struct socket *sock;
 
 	rcu_read_lock();
-	sk = udp6_lib_lookup(&init_net, NULL, 0, &in6addr_any,
+	sk = udp6_lib_lookup(dev_net(ndev), NULL, 0, &in6addr_any,
 			     htons(ROCE_V2_UDP_DPORT), 0);
 	rcu_read_unlock();
 	if (sk)
 		return 0;
 
-	sock = rxe_setup_udp_tunnel(&init_net, htons(ROCE_V2_UDP_DPORT), true);
+	sock = rxe_setup_udp_tunnel(dev_net(ndev), htons(ROCE_V2_UDP_DPORT), true);
 	if (PTR_ERR(sock) == -EAFNOSUPPORT) {
 		pr_warn("IPv6 is not supported, can not create a UDPv6 socket\n");
 		return 0;
@@ -745,14 +752,14 @@ void rxe_net_exit(void)
 	unregister_netdevice_notifier(&rxe_net_notifier);
 }
 
-int rxe_net_init(void)
+int rxe_net_init(struct net_device *ndev)
 {
 	int err;
 
-	err = rxe_net_ipv4_init();
+	err = rxe_net_ipv4_init(ndev);
 	if (err)
 		return err;
-	err = rxe_net_ipv6_init();
+	err = rxe_net_ipv6_init(ndev);
 	if (err)
 		goto err_out;
 	return 0;
drivers/infiniband/sw/rxe/rxe_net.h +1 -1
index 027b20e1bab6..56249677d692 100644
@@ -15,7 +15,7 @@ int rxe_net_add(const char *ibdev_name, struct net_device *ndev);
 void rxe_net_del(struct ib_device *dev);
 
 int rxe_register_notifier(void);
-int rxe_net_init(void);
+int rxe_net_init(struct net_device *ndev);
 void rxe_net_exit(void);
 
 #endif /* RXE_NET_H */
Signature · 1 line
2.27.0
author
#7 lore raw

PATCH v7 7/8 RDMA/rxe: Add the support of net namespace notifier

In reply to Zhu Yanjun

From: Zhu Yanjun <[email protected]>

The functions register_pernet_subsys/unregister_pernet_subsys register a notifier of net namespace. When a new net namespace is created, the init function of rxe will be called to initialize sk4 and sk6 socks. When a net namespace is destroyed, the exit function will be called to handle sk4 and sk6 socks.

The functions rxe_ns_pernet_sk4 and rxe_ns_pernet_sk6 are used to get sk4 and sk6 socks.

The functions rxe_ns_pernet_set_sk4 and rxe_ns_pernet_set_sk6 are used to set sk4 and sk6 socks.

---
 drivers/infiniband/sw/rxe/Makefile  |   3 +-
 drivers/infiniband/sw/rxe/rxe.c     |   9 ++
 drivers/infiniband/sw/rxe/rxe_net.c |  56 ++++++------
 drivers/infiniband/sw/rxe/rxe_ns.c  | 134 ++++++++++++++++++++++++++++
 drivers/infiniband/sw/rxe/rxe_ns.h  |  17 ++++
 5 files changed, 193 insertions(+), 26 deletions(-)
 create mode 100644 drivers/infiniband/sw/rxe/rxe_ns.c
 create mode 100644 drivers/infiniband/sw/rxe/rxe_ns.h
drivers/infiniband/sw/rxe/Makefile +2 -1
index 5395a581f4bb..8380f97674cb 100644
@@ -22,4 +22,5 @@ rdma_rxe-y := \
 	rxe_mcast.o \
 	rxe_task.o \
 	rxe_net.o \
-	rxe_hw_counters.o
+	rxe_hw_counters.o \
+	rxe_ns.o
drivers/infiniband/sw/rxe/rxe.c +9 -0
index ef632be05e38..96841c56ff3a 100644
@@ -9,6 +9,7 @@
 #include "rxe.h"
 #include "rxe_loc.h"
 #include "rxe_net.h"
+#include "rxe_ns.h"
 
 MODULE_AUTHOR("Bob Pearson, Frank Zago, John Groves, Kamal Heib");
 MODULE_DESCRIPTION("Soft RDMA transport");
@@ -236,6 +237,12 @@ static int __init rxe_module_init(void)
 		return -1;
 	}
 
+	err = rxe_namespace_init();
+	if (err) {
+		pr_err("Failed to register net namespace notifier\n");
+		return -1;
+	}
+
 	pr_info("loaded\n");
 	return 0;
 }
@@ -246,6 +253,8 @@ static void __exit rxe_module_exit(void)
 	ib_unregister_driver(RDMA_DRIVER_RXE);
 	rxe_net_exit();
 
+	rxe_namespace_exit();
+
 	pr_info("unloaded\n");
 }
 
drivers/infiniband/sw/rxe/rxe_net.c +31 -25

117 lines not on this page · raw message

drivers/infiniband/sw/rxe/rxe_ns.c new file +134 -0

134 lines not on this page · raw message

drivers/infiniband/sw/rxe/rxe_ns.h new file +17 -0
new file mode 100644
index 000000000000..da5bfcea1274
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
+/*
+ * Copyright (c) 2016 Mellanox Technologies Ltd. All rights reserved.
+ * Copyright (c) 2015 System Fabric Works, Inc. All rights reserved.
+ */
+
+#ifndef RXE_NS_H
+#define RXE_NS_H
+
+struct sock *rxe_ns_pernet_sk4(struct net *net);
+struct sock *rxe_ns_pernet_sk6(struct net *net);
+void rxe_ns_pernet_set_sk4(struct net *net, struct sock *sk);
+void rxe_ns_pernet_set_sk6(struct net *net, struct sock *sk);
+int __init rxe_namespace_init(void);
+void __exit rxe_namespace_exit(void);
+
+#endif /* RXE_NS_H */
Signature · 1 line
2.27.0
author
#8 lore raw

PATCH v7 8/8 RDMA/rxe: Replace l_sk6 with sk6 in net namespace

In reply to Zhu Yanjun

From: Zhu Yanjun <[email protected]>

The net namespace variable sk6 can be used. As such, l_sk6 can be replaced with it.

---
 drivers/infiniband/sw/rxe/rxe.c       |  1 -
 drivers/infiniband/sw/rxe/rxe_net.c   | 20 +-------------------
 drivers/infiniband/sw/rxe/rxe_verbs.h |  1 -
 3 files changed, 1 insertion(+), 21 deletions(-)
drivers/infiniband/sw/rxe/rxe.c +0 -1
index 96841c56ff3a..b1dfba2fdf15 100644
@@ -75,7 +75,6 @@ static void rxe_init_device_param(struct rxe_dev *rxe)
 			rxe->ndev->dev_addr);
 
 	rxe->max_ucontext			= RXE_MAX_UCONTEXT;
-	rxe->l_sk6				= NULL;
 }
 
 /* initialize port attributes */
drivers/infiniband/sw/rxe/rxe_net.c +1 -19
index b0f588ffe6a7..b643ecb87634 100644
@@ -50,24 +50,6 @@ static struct dst_entry *rxe_find_route6(struct rxe_qp *qp,
 {
 	struct dst_entry *ndst;
 	struct flowi6 fl6 = { { 0 } };
-	struct rxe_dev *rxe;
-
-	rxe = rxe_get_dev_from_net(ndev);
-	if (!rxe->l_sk6) {
-		struct sock *sk;
-
-		rcu_read_lock();
-		sk = udp6_lib_lookup(dev_net(ndev), NULL, 0, &in6addr_any,
-				     htons(ROCE_V2_UDP_DPORT), 0);
-		rcu_read_unlock();
-		if (!sk) {
-			rxe_dbg_qp(qp, "file: %s +%d, error\n", __FILE__, __LINE__);
-			return (struct dst_entry *)sk;
-		}
-		__sock_put(sk);
-		rxe->l_sk6 = sk->sk_socket;
-	}
-
 
 	memset(&fl6, 0, sizeof(fl6));
 	fl6.flowi6_oif = ndev->ifindex;
@@ -76,7 +58,7 @@ static struct dst_entry *rxe_find_route6(struct rxe_qp *qp,
 	fl6.flowi6_proto = IPPROTO_UDP;
 
 	ndst = ipv6_stub->ipv6_dst_lookup_flow(dev_net(ndev),
-					       rxe->l_sk6->sk, &fl6,
+					       rxe_ns_pernet_sk6(dev_net(ndev)), &fl6,
 					       NULL);
 	if (IS_ERR(ndst)) {
 		rxe_dbg_qp(qp, "no route to %pI6\n", daddr);
drivers/infiniband/sw/rxe/rxe_verbs.h +0 -1
index 0aa3817770a5..26a20f088692 100644
@@ -382,7 +382,6 @@ struct rxe_dev {
 
 	struct rxe_port		port;
 	struct crypto_shash	*tfm;
-	struct socket		*l_sk6;
 };
 
 static inline void rxe_counter_inc(struct rxe_dev *rxe, enum rxe_counters index)
Signature · 1 line
2.27.0