arm64: sdei: abort running SDEI handlers during crash
Subsystems (2)
PATCH v5 1/1 arm64: sdei: abort running SDEI handlers during crash
Interrupts are blocked in SDEI context, per the SDEI spec: "The client interrupts cannot preempt the event handler." If we crashed in the SDEI handler-running context (as with ACPI's AGDI) then we need to clean up the SDEI state before proceeding to the crash kernel so that the crash kernel can have working interrupts.
Track the active SDEI handler per-cpu so that we can COMPLETE_AND_RESUME the handler, discarding the interrupted context.
---
Changes since v4:
- unconditionally include asm/sdei.h from linux/arm_sdei.h
v4 Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/
Changes since v3:
- Fixed messed up #ifdef logic in entry.S
- Moved sdei_handler_abort() logic from smp.c to sdei.c
v3 Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/
Changes since v2:
- Dropped the patch fiddling with the sdei conduit.
v2 Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/
Changes since v1:
- Store the active SDEI event being handled per-cpu, use the per-cpu active
handler information to know when to abort.
- Add prints before attempting to abort sdei handlers.
v1 Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/
arch/arm64/include/asm/sdei.h | 11 +++++++++++ arch/arm64/kernel/entry.S | 27 +++++++++++++++++++++++++-- arch/arm64/kernel/sdei.c | 22 ++++++++++++++++++++++ arch/arm64/kernel/smp.c | 8 ++++---- include/linux/arm_sdei.h | 2 -- 5 files changed, 62 insertions(+), 8 deletions(-)
arch/arm64/include/asm/sdei.h +11 -0
@@ -17,6 +17,9 @@#include <asm/virt.h> +DECLARE_PER_CPU(struct sdei_registered_event *, sdei_active_normal_event); +DECLARE_PER_CPU(struct sdei_registered_event *, sdei_active_critical_event); +extern unsigned long sdei_exit_mode;/* Software Delegated Exception entry point from firmware*/
@@ -29,6 +32,14 @@ asmlinkage void __sdei_asm_entry_trampoline(unsigned long event_num,unsigned long pc, unsigned long pstate); +#ifdef CONFIG_ARM_SDE_INTERFACE +/* Abort a running handler. Context is discarded. */ +void sdei_handler_abort (void ); +void __sdei_handler_abort (void ); +#else +static inline void sdei_handler_abort (void ) { } +#endif +/* * The above entry point does the minimum to call C code. This function does * anything else, before calling the driver.
arch/arm64/kernel/entry.S +25 -2
@@ -1003,9 +1003,13 @@ SYM_CODE_START(__sdei_asm_handler) mov x19, x1 -#if defined(CONFIG_VMAP_STACK) || defined(CONFIG_SHADOW_CALL_STACK) + /* Store the registered-event for crash_smp_send_stop() */ ldrb w4, [x19, #SDEI_EVENT_PRIORITY] -#endif + cbnz w4, 1f + adr_this_cpu dst=x5, sym=sdei_active_normal_event, tmp=x6 + b 2f +1: adr_this_cpu dst=x5, sym=sdei_active_critical_event, tmp=x6 +2: str x19, [x5] #ifdef CONFIG_VMAP_STACK /*
@@ -1072,6 +1076,14 @@ SYM_CODE_START(__sdei_asm_handler) ldr_l x2, sdei_exit_mode + /* Clear the registered-event seen by crash_smp_send_stop() */ + ldrb w3, [x4, #SDEI_EVENT_PRIORITY] + cbnz w3, 1f + adr_this_cpu dst=x5, sym=sdei_active_normal_event, tmp=x6 + b 2f +1: adr_this_cpu dst=x5, sym=sdei_active_critical_event, tmp=x6 +2: str xzr, [x5] + alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0 sdei_handler_exit exit_mode=x2 alternative_else_nop_endif
@@ -1082,4 +1094,15 @@ alternative_else_nop_endif #endif SYM_CODE_END(__sdei_asm_handler) NOKPROBE(__sdei_asm_handler) + +SYM_CODE_START(__sdei_handler_abort) + mov_q x0, SDEI_1_0_FN_SDEI_EVENT_COMPLETE_AND_RESUME + adr x1, 1f + ldr_l x2, sdei_exit_mode + sdei_handler_exit exit_mode=x2 + // exit the handler and jump to the next instruction. + // Exit will stomp x0-x17, PSTATE, ELR_ELx, and SPSR_ELx. +1: ret +SYM_CODE_END(__sdei_handler_abort) +NOKPROBE(__sdei_handler_abort) #endif /* CONFIG_ARM_SDE_INTERFACE */
arch/arm64/kernel/sdei.c +22 -0
@@ -47,6 +47,9 @@ DEFINE_PER_CPU(unsigned long *, sdei_shadow_call_stack_normal_ptr); DEFINE_PER_CPU(unsigned long *, sdei_shadow_call_stack_critical_ptr);#endif +DEFINE_PER_CPU(struct sdei_registered_event *, sdei_active_normal_event); +DEFINE_PER_CPU(struct sdei_registered_event *, sdei_active_critical_event); +static void _free_sdei_stack (unsigned long *__percpu *ptr,int cpu) {unsigned long *p;
@@ -262,3 +265,22 @@ unsigned long __kprobes do_sdei_event(struct pt_regs *regs,return vbar +0x480 ; } + +void sdei_handler_abort (void ) +{ +/* +* If the crash happened in an SDEI event handler then we need to +* finish the handler with the firmware so that we can have working +* interrupts in the crash kernel. +*/ +if (__this_cpu_read (sdei_active_critical_event)) { +pr_warn ("still in SDEI critical event context, attempting to finish handler.\n" ); +__sdei_handler_abort (); +__this_cpu_write (sdei_active_critical_event,NULL ); + } +if (__this_cpu_read (sdei_active_normal_event)) { +pr_warn ("still in SDEI normal event context, attempting to finish handler.\n" ); +__sdei_handler_abort (); +__this_cpu_write (sdei_active_normal_event,NULL ); + } +}
arch/arm64/kernel/smp.c +4 -4
@@ -1048,10 +1048,8 @@ void crash_smp_send_stop(void)* If this cpu is the only one alive at this point in time, online or * not, there are no stop messages to be sent around, so just back out. */ -if (num_other_online_cpus () ==0 ) { -sdei_mask_local_cpu (); -return ; - } +if (num_other_online_cpus () ==0 ) + goto skip_ipi;cpumask_copy (&mask, cpu_online_mask);cpumask_clear_cpu (smp_processor_id (), &mask);
@@ -1070,7 +1068,9 @@ void crash_smp_send_stop(void)pr_warn ("SMP: failed to stop secondary CPUs %*pbl\n" ,cpumask_pr_args (&mask)); +skip_ipi:sdei_mask_local_cpu (); +sdei_handler_abort (); }bool smp_crash_stop_failed (void )
include/linux/arm_sdei.h +0 -2
@@ -7,9 +7,7 @@#include <acpi/ghes.h> -#ifdef CONFIG_ARM_SDE_INTERFACE #include <asm/sdei.h> -#endif /* Arch code should override this to set the entry point from firmware... */ #ifndef sdei_arch_get_entry_point
Signature · 1 line
2.41.0
kernel test robot
build botkernel test robot noticed the following build errors:
Hi Scott,
kernel test robot noticed the following build errors:
[auto build test ERROR on arm64/for-next/core]
[also build test ERROR on arm/for-next arm/fixes kvmarm/next soc/for-next linus/master v6.4 next-20230626] [If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/D-Scott-Phillips/arm64-sdei-abort-running-SDEI-handlers-during-crash/20230626-180652 base: https://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git for-next/core patch link: https://lore.kernel.org/r/20230626074748.2785-1-scott%40os.amperecomputing.com patch subject: [PATCH v5] arm64: sdei: abort running SDEI handlers during crash config: x86_64-kexec (https://download.01.org/0day-ci/archive/20230626/[email protected]/config) compiler: gcc-12 (Debian 12.2.0-14) 12.2.0 reproduce: (https://download.01.org/0day-ci/archive/20230626/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All errors (new ones prefixed by >>):
In file included from drivers/acpi/apei/ghes.c:20:
>> include/linux/arm_sdei.h:10:10: fatal error: asm/sdei.h: No such file or directory
10 | #include <asm/sdei.h>
| ^~~~~~~~~~~~compilation terminated.
vim +10 include/linux/arm_sdei.h
f9f05395f384ee James Morse 2019-01-29 9ad6eb31ef90355 James Morse 2018-01-08 @10 #include <asm/sdei.h> ad6eb31ef90355 James Morse 2018-01-08 11
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki