Skip to contentSkip to conversation

Bluetooth: hci_conn: Consolidate code for aborting connections

PATCH Superseded Luiz Augusto von Dentz 2 participants 4 messages Jun 28, 2023

Subsystems (2)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Luiz Augusto von Dentz

author maintainer
#0 lore raw

PATCH v3 1/3 Bluetooth: hci_conn: Consolidate code for aborting connections

From: Luiz Augusto von Dentz <[email protected]>

This consolidates code for aborting connections using hci_cmd_sync_queue so it is synchronized with other threads, but because of the fact that some commands may block the cmd_sync_queue while waiting specific events this attempt to cancel those requests by using hci_cmd_sync_cancel.

---
 include/net/bluetooth/hci_core.h |   2 +-
 net/bluetooth/hci_conn.c         | 160 +++++++------------------------
 net/bluetooth/hci_sync.c         |  20 ++--
 net/bluetooth/mgmt.c             |  15 +--
 4 files changed, 48 insertions(+), 149 deletions(-)
include/net/bluetooth/hci_core.h +1 -1
index 05a9b3ab3f56..094ca3aca15e 100644
@@ -741,6 +741,7 @@ struct hci_conn {
 	unsigned long	flags;
 
 	enum conn_reasons conn_reason;
+	__u8		abort_reason;
 
 	__u32		clock;
 	__u16		clock_accuracy;
@@ -760,7 +761,6 @@ struct hci_conn {
 	struct delayed_work auto_accept_work;
 	struct delayed_work idle_work;
 	struct delayed_work le_conn_timeout;
-	struct work_struct  le_scan_cleanup;
 
 	struct device	dev;
 	struct dentry	*debugfs;
net/bluetooth/hci_conn.c +33 -127

191 lines not on this page · raw message

net/bluetooth/hci_sync.c +13 -7
index afb8e970e62c..ef8297d04a8c 100644
@@ -5271,10 +5271,13 @@ static int hci_disconnect_sync(struct hci_dev *hdev, struct hci_conn *conn,
 }
 
 static int hci_le_connect_cancel_sync(struct hci_dev *hdev,
-				      struct hci_conn *conn)
+				      struct hci_conn *conn, u8 reason)
 {
+	/* Return reason if scanning since the connection shall probably be
+	 * cleanup directly.
+	 */
 	if (test_bit(HCI_CONN_SCANNING, &conn->flags))
-		return 0;
+		return reason;
 
 	if (test_and_set_bit(HCI_CONN_CANCEL, &conn->flags))
 		return 0;
@@ -5283,10 +5286,11 @@ static int hci_le_connect_cancel_sync(struct hci_dev *hdev,
 				     0, NULL, HCI_CMD_TIMEOUT);
 }
 
-static int hci_connect_cancel_sync(struct hci_dev *hdev, struct hci_conn *conn)
+static int hci_connect_cancel_sync(struct hci_dev *hdev, struct hci_conn *conn,
+				   u8 reason)
 {
 	if (conn->type == LE_LINK)
-		return hci_le_connect_cancel_sync(hdev, conn);
+		return hci_le_connect_cancel_sync(hdev, conn, reason);
 
 	if (hdev->hci_ver < BLUETOOTH_VER_1_2)
 		return 0;
@@ -5339,9 +5343,11 @@ int hci_abort_conn_sync(struct hci_dev *hdev, struct hci_conn *conn, u8 reason)
 	case BT_CONFIG:
 		return hci_disconnect_sync(hdev, conn, reason);
 	case BT_CONNECT:
-		err = hci_connect_cancel_sync(hdev, conn);
+		err = hci_connect_cancel_sync(hdev, conn, reason);
 		/* Cleanup hci_conn object if it cannot be cancelled as it
-		 * likelly means the controller and host stack are out of sync.
+		 * likelly means the controller and host stack are out of sync
+		 * or in case of LE it was still scanning so it can be cleanup
+		 * safely.
 		 */
 		if (err) {
 			hci_dev_lock(hdev);
@@ -6255,7 +6261,7 @@ int hci_le_create_conn_sync(struct hci_dev *hdev, struct hci_conn *conn)
 
 done:
 	if (err == -ETIMEDOUT)
-		hci_le_connect_cancel_sync(hdev, conn);
+		hci_le_connect_cancel_sync(hdev, conn, 0x00);
 
 	/* Re-enable advertising after the connection attempt is finished. */
 	hci_resume_advertising_sync(hdev);
net/bluetooth/mgmt.c +1 -14
index 0f5ba618ceb1..3156bc27088e 100644
@@ -3586,18 +3586,6 @@ static int pair_device(struct sock *sk, struct hci_dev *hdev, void *data,
 	return err;
 }
 
-static int abort_conn_sync(struct hci_dev *hdev, void *data)
-{
-	struct hci_conn *conn;
-	u16 handle = PTR_ERR(data);
-
-	conn = hci_conn_hash_lookup_handle(hdev, handle);
-	if (!conn)
-		return 0;
-
-	return hci_abort_conn_sync(hdev, conn, HCI_ERROR_REMOTE_USER_TERM);
-}
-
 static int cancel_pair_device(struct sock *sk, struct hci_dev *hdev, void *data,
 			      u16 len)
 {
@@ -3648,8 +3636,7 @@ static int cancel_pair_device(struct sock *sk, struct hci_dev *hdev, void *data,
 					      le_addr_type(addr->type));
 
 	if (conn->conn_reason == CONN_REASON_PAIR_DEVICE)
-		hci_cmd_sync_queue(hdev, abort_conn_sync, ERR_PTR(conn->handle),
-				   NULL);
+		hci_abort_conn(conn, HCI_ERROR_REMOTE_USER_TERM);
 
 unlock:
 	hci_dev_unlock(hdev);
Signature · 1 line
2.40.1
author maintainer
#1 lore raw

PATCH v3 2/3 Bluetooth: hci_sync: Fix not handling ISO_LINK in hci_abort_conn_sync

From: Luiz Augusto von Dentz <[email protected]>

ISO_LINK connections where not being handled properly on hci_abort_conn_sync which sometimes resulted in sending the wrong commands, or in case of having the reject command being sent by the socket code (iso.c) which is sort of a layer violation.

---
 net/bluetooth/hci_sync.c | 34 ++++++++++++++++++++++++++++++++++
 net/bluetooth/iso.c      | 14 --------------
 2 files changed, 34 insertions(+), 14 deletions(-)
net/bluetooth/hci_sync.c +34 -0
index ef8297d04a8c..29bcfd576713 100644
@@ -5292,6 +5292,24 @@ static int hci_connect_cancel_sync(struct hci_dev *hdev, struct hci_conn *conn,
 	if (conn->type == LE_LINK)
 		return hci_le_connect_cancel_sync(hdev, conn, reason);
 
+	if (conn->type == ISO_LINK) {
+		/* BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E
+		 * page 1857:
+		 *
+		 * If this command is issued for a CIS on the Central and the
+		 * CIS is successfully terminated before being established,
+		 * then an HCI_LE_CIS_Established event shall also be sent for
+		 * this CIS with the Status Operation Cancelled by Host (0x44).
+		 */
+		if (test_bit(HCI_CONN_CREATE_CIS, &conn->flags))
+			return hci_disconnect_sync(hdev, conn, reason);
+
+		/* There is no way to cancel a BIS without terminating the BIG
+		 * which is done later on connection cleanup.
+		 */
+		return 0;
+	}
+
 	if (hdev->hci_ver < BLUETOOTH_VER_1_2)
 		return 0;
 
@@ -5318,11 +5336,27 @@ static int hci_reject_sco_sync(struct hci_dev *hdev, struct hci_conn *conn,
 				     sizeof(cp), &cp, HCI_CMD_TIMEOUT);
 }
 
+static int hci_le_reject_cis_sync(struct hci_dev *hdev, struct hci_conn *conn,
+				  u8 reason)
+{
+	struct hci_cp_le_reject_cis cp;
+
+	memset(&cp, 0, sizeof(cp));
+	cp.handle = cpu_to_le16(conn->handle);
+	cp.reason = reason;
+
+	return __hci_cmd_sync_status(hdev, HCI_OP_LE_REJECT_CIS,
+				     sizeof(cp), &cp, HCI_CMD_TIMEOUT);
+}
+
 static int hci_reject_conn_sync(struct hci_dev *hdev, struct hci_conn *conn,
 				u8 reason)
 {
 	struct hci_cp_reject_conn_req cp;
 
+	if (conn->type == ISO_LINK)
+		return hci_le_reject_cis_sync(hdev, conn, reason);
+
 	if (conn->type == SCO_LINK || conn->type == ESCO_LINK)
 		return hci_reject_sco_sync(hdev, conn, reason);
 
net/bluetooth/iso.c +0 -14
index 84d238d0639a..9c41af55f2c7 100644
@@ -614,18 +614,6 @@ static void iso_sock_kill(struct sock *sk)
 	sock_put(sk);
 }
 
-static void iso_conn_defer_reject(struct hci_conn *conn)
-{
-	struct hci_cp_le_reject_cis cp;
-
-	BT_DBG("conn %p", conn);
-
-	memset(&cp, 0, sizeof(cp));
-	cp.handle = cpu_to_le16(conn->handle);
-	cp.reason = HCI_ERROR_REJ_BAD_ADDR;
-	hci_send_cmd(conn->hdev, HCI_OP_LE_REJECT_CIS, sizeof(cp), &cp);
-}
-
 static void __iso_sock_close(struct sock *sk)
 {
 	BT_DBG("sk %p state %d socket %p", sk, sk->sk_state, sk->sk_socket);
@@ -650,8 +638,6 @@ static void __iso_sock_close(struct sock *sk)
 		break;
 
 	case BT_CONNECT2:
-		if (iso_pi(sk)->conn->hcon)
-			iso_conn_defer_reject(iso_pi(sk)->conn->hcon);
 		iso_chan_del(sk, ECONNRESET);
 		break;
 	case BT_CONNECT:
Signature · 1 line
2.40.1
author maintainer
#2 lore raw

PATCH v3 3/3 Bluetooth: hci_conn: Always allocate unique handles

In reply to Luiz Augusto von Dentz

From: Luiz Augusto von Dentz <[email protected]>

This attempts to always allocate a unique handle for connections so they can be properly aborted by the likes of hci_abort_conn, so this uses the invalid range as a pool of unset handles that way if userspace is trying to create multiple connections at once each will be given a unique handle which will be considered unset.

---
 include/net/bluetooth/hci_core.h |  2 +-
 net/bluetooth/hci_conn.c         | 25 ++++++++++++++++++++++---
 net/bluetooth/hci_event.c        |  6 +++---
 3 files changed, 26 insertions(+), 7 deletions(-)
include/net/bluetooth/hci_core.h +1 -1
index 094ca3aca15e..c0ca3f869c92 100644
@@ -321,8 +321,8 @@ struct adv_monitor {
 
 #define HCI_MAX_SHORT_NAME_LENGTH	10
 
-#define HCI_CONN_HANDLE_UNSET		0xffff
 #define HCI_CONN_HANDLE_MAX		0x0eff
+#define HCI_CONN_HANDLE_UNSET(_handle)	(_handle > HCI_CONN_HANDLE_MAX)
 
 /* Min encryption key size to match with SMP */
 #define HCI_MIN_ENC_KEY_SIZE		7
net/bluetooth/hci_conn.c +22 -3
index 88f18f375684..3de50985c2cf 100644
@@ -932,6 +932,25 @@ static void cis_cleanup(struct hci_conn *conn)
 	hci_le_remove_cig(hdev, conn->iso_qos.ucast.cig);
 }
 
+static u16 hci_conn_hash_alloc_unset(struct hci_dev *hdev)
+{
+	struct hci_conn_hash *h = &hdev->conn_hash;
+	struct hci_conn  *c;
+	u16 handle = HCI_CONN_HANDLE_MAX + 1;
+
+	rcu_read_lock();
+
+	list_for_each_entry_rcu(c, &h->list, list) {
+		/* Find the first unused handle */
+		if (handle == 0xffff || c->handle != handle)
+			break;
+		handle++;
+	}
+	rcu_read_unlock();
+
+	return handle;
+}
+
 struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst,
 			      u8 role)
 {
@@ -945,7 +964,7 @@ struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst,
 
 	bacpy(&conn->dst, dst);
 	bacpy(&conn->src, &hdev->bdaddr);
-	conn->handle = HCI_CONN_HANDLE_UNSET;
+	conn->handle = hci_conn_hash_alloc_unset(hdev);
 	conn->hdev  = hdev;
 	conn->type  = type;
 	conn->role  = role;
@@ -1057,7 +1076,7 @@ static void hci_conn_unlink(struct hci_conn *conn)
 			 */
 			if ((child->type == SCO_LINK ||
 			     child->type == ESCO_LINK) &&
-			    child->handle == HCI_CONN_HANDLE_UNSET)
+			    HCI_CONN_HANDLE_UNSET(child->handle))
 				hci_conn_del(child);
 		}
 
@@ -1931,7 +1950,7 @@ int hci_conn_check_create_cis(struct hci_conn *conn)
 		return -EINVAL;
 
 	if (!conn->parent || conn->parent->state != BT_CONNECTED ||
-	    conn->state != BT_CONNECT || conn->handle == HCI_CONN_HANDLE_UNSET)
+	    conn->state != BT_CONNECT || HCI_CONN_HANDLE_UNSET(conn->handle))
 		return 1;
 
 	return 0;
net/bluetooth/hci_event.c +3 -3
index 77cbf13037b3..0b4415e79989 100644
@@ -3173,7 +3173,7 @@ static void hci_conn_complete_evt(struct hci_dev *hdev, void *data,
 	 * As the connection handle is set here for the first time, it indicates
 	 * whether the connection is already set up.
 	 */
-	if (conn->handle != HCI_CONN_HANDLE_UNSET) {
+	if (!HCI_CONN_HANDLE_UNSET(conn->handle)) {
 		bt_dev_err(hdev, "Ignoring HCI_Connection_Complete for existing connection");
 		goto unlock;
 	}
@@ -5032,7 +5032,7 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev, void *data,
 	 * As the connection handle is set here for the first time, it indicates
 	 * whether the connection is already set up.
 	 */
-	if (conn->handle != HCI_CONN_HANDLE_UNSET) {
+	if (!HCI_CONN_HANDLE_UNSET(conn->handle)) {
 		bt_dev_err(hdev, "Ignoring HCI_Sync_Conn_Complete event for existing connection");
 		goto unlock;
 	}
@@ -5896,7 +5896,7 @@ static void le_conn_complete_evt(struct hci_dev *hdev, u8 status,
 	 * As the connection handle is set here for the first time, it indicates
 	 * whether the connection is already set up.
 	 */
-	if (conn->handle != HCI_CONN_HANDLE_UNSET) {
+	if (!HCI_CONN_HANDLE_UNSET(conn->handle)) {
 		bt_dev_err(hdev, "Ignoring HCI_Connection_Complete for existing connection");
 		goto unlock;
 	}
Signature · 1 line
2.40.1
#3 lore raw
In reply to Luiz Augusto von Dentz

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=761033

---Test result---

Test Summary:

CheckPatch                    PASS      3.28 seconds
GitLint                       PASS      1.07 seconds
SubjectPrefix                 PASS      0.39 seconds
BuildKernel                   PASS      33.55 seconds
CheckAllWarning               PASS      36.54 seconds
CheckSparse                   WARNING   43.18 seconds
CheckSmatch                   WARNING   113.11 seconds
BuildKernel32                 PASS      32.16 seconds
TestRunnerSetup               PASS      456.30 seconds
TestRunner_l2cap-tester       PASS      17.45 seconds
TestRunner_iso-tester         PASS      24.69 seconds
TestRunner_bnep-tester        PASS      5.82 seconds
TestRunner_mgmt-tester        PASS      133.82 seconds
TestRunner_rfcomm-tester      PASS      9.19 seconds
TestRunner_sco-tester         PASS      10.55 seconds
TestRunner_ioctl-tester       PASS      9.96 seconds
TestRunner_mesh-tester        PASS      7.39 seconds
TestRunner_smp-tester         PASS      8.44 seconds
TestRunner_userchan-tester    PASS      6.04 seconds
IncrementalBuild              PASS      63.76 seconds

Details
##############################
Test: CheckSparse - WARNING
Desc: Run sparse tool with linux kernel
Output:
net/bluetooth/hci_event.c: note: in included file (through include/net/bluetooth/hci_core.h):
##############################
Test: CheckSmatch - WARNING
Desc: Run smatch tool with source
Output:
net/bluetooth/hci_event.c: note: in included file (through include/net/bluetooth/hci_core.h):

---
Regards,
Linux Bluetooth