ASoC: mediatek: mt8188: add constraints for PCM
Subsystems (3)
PATCH 1/1 ASoC: mediatek: mt8188: add constraints for PCM
For certain projects, only a limited number of parameters are necessary. Therefore, it may be beneficial to add constraints that restrict the capacity of the PCM.
--- sound/soc/mediatek/mt8188/mt8188-mt6359.c | 145 +++++++++++++++++++++- 1 file changed, 144 insertions(+), 1 deletion(-)
sound/soc/mediatek/mt8188/mt8188-mt6359.c +144 -1
@@ -30,6 +30,7 @@#define TEST_MISO_DONE_2 BIT(29)#define NAU8825_HS_PRESENT BIT(0) +#define DPCM_FE_CONSTRAINT BIT(16)/* * Maxim MAX98390
@@ -452,6 +453,143 @@ enum { DAI_LINK_UL_SRC_BE, }; +static int mt8188_playback_startup (struct snd_pcm_substream *substream) +{ +static const unsigned int rates[] = { +48000 + }; +static const unsigned int channels[] = { +2 + }; +static const struct snd_pcm_hw_constraint_list constraints_rates = { + .count =ARRAY_SIZE (rates), + .list = rates, + .mask =0 , + }; +static const struct snd_pcm_hw_constraint_list constraints_channels = { + .count =ARRAY_SIZE (channels), + .list = channels, + .mask =0 , + }; + +struct snd_soc_pcm_runtime *rtd =asoc_substream_to_rtd (substream); +struct snd_pcm_runtime *runtime = substream->runtime; +struct mt8188_mt6359_priv *priv =snd_soc_card_get_drvdata (rtd->card); +struct mt8188_card_data *data = (struct mt8188_card_data *)priv->private_data; +int ret; + +if (!(data->quirk &DPCM_FE_CONSTRAINT )) +return 0 ; + + ret =snd_pcm_hw_constraint_list (runtime,0 , +SNDRV_PCM_HW_PARAM_RATE , + &constraints_rates); +if (ret <0 ) { +dev_err (rtd->dev,"hw_constraint_list rate failed\n" ); +return ret; + } + + ret =snd_pcm_hw_constraint_list (runtime,0 , +SNDRV_PCM_HW_PARAM_CHANNELS , + &constraints_channels); +if (ret <0 ) { +dev_err (rtd->dev,"hw_constraint_list channel failed\n" ); +return ret; + } + +return 0 ; +} + +static const struct snd_soc_ops mt8188_playback_ops = { + .startup = mt8188_playback_startup, +}; + +static int mt8188_capture_startup (struct snd_pcm_substream *substream) +{ +static const unsigned int rates[] = { +48000 + }; +static const struct snd_pcm_hw_constraint_list constraints_rates = { + .count =ARRAY_SIZE (rates), + .list = rates, + .mask =0 , + }; + +struct snd_soc_pcm_runtime *rtd =asoc_substream_to_rtd (substream); +struct snd_pcm_runtime *runtime = substream->runtime; +struct mt8188_mt6359_priv *priv =snd_soc_card_get_drvdata (rtd->card); +struct mt8188_card_data *data = (struct mt8188_card_data *)priv->private_data; +int ret; + +if (!(data->quirk &DPCM_FE_CONSTRAINT )) +return 0 ; + + ret =snd_pcm_hw_constraint_list (runtime,0 , +SNDRV_PCM_HW_PARAM_RATE , + &constraints_rates); +if (ret <0 ) { +dev_err (rtd->dev,"hw_constraint_list rate failed\n" ); +return ret; + } + +return 0 ; +} + +static const struct snd_soc_ops mt8188_capture_ops = { + .startup = mt8188_capture_startup, +}; + +static int mt8188_hdmi_dptx_startup (struct snd_pcm_substream *substream) +{ +static const unsigned int rates[] = { +48000 + }; +static const unsigned int channels[] = { +2 ,4 ,6 ,8 + }; +static const struct snd_pcm_hw_constraint_list constraints_rates = { + .count =ARRAY_SIZE (rates), + .list = rates, + .mask =0 , + }; +static const struct snd_pcm_hw_constraint_list constraints_channels = { + .count =ARRAY_SIZE (channels), + .list = channels, + .mask =0 , + }; + +struct snd_soc_pcm_runtime *rtd =asoc_substream_to_rtd (substream); +struct snd_pcm_runtime *runtime = substream->runtime; +struct mt8188_mt6359_priv *priv =snd_soc_card_get_drvdata (rtd->card); +struct mt8188_card_data *data = (struct mt8188_card_data *)priv->private_data; +int ret; + +if (!(data->quirk &DPCM_FE_CONSTRAINT )) +return 0 ; + + ret =snd_pcm_hw_constraint_list (runtime,0 , +SNDRV_PCM_HW_PARAM_RATE , + &constraints_rates); +if (ret <0 ) { +dev_err (rtd->dev,"hw_constraint_list rate failed\n" ); +return ret; + } + + ret =snd_pcm_hw_constraint_list (runtime,0 , +SNDRV_PCM_HW_PARAM_CHANNELS , + &constraints_channels); +if (ret <0 ) { +dev_err (rtd->dev,"hw_constraint_list channel failed\n" ); +return ret; + } + +return 0 ; +} + +static const struct snd_soc_ops mt8188_hdmi_dptx_playback_ops = { + .startup = mt8188_hdmi_dptx_startup, +}; +static int mt8188_dptx_hw_params (struct snd_pcm_substream *substream,struct snd_pcm_hw_params *params) {
@@ -723,6 +861,7 @@ static struct snd_soc_dai_link mt8188_mt6359_dai_links[] = { }, .dynamic = 1, .dpcm_playback = 1, + .ops = &mt8188_playback_ops, SND_SOC_DAILINK_REG(playback2), }, [DAI_LINK_DL3_FE] = {
@@ -734,6 +873,7 @@ static struct snd_soc_dai_link mt8188_mt6359_dai_links[] = { }, .dynamic = 1, .dpcm_playback = 1, + .ops = &mt8188_playback_ops, SND_SOC_DAILINK_REG(playback3), }, [DAI_LINK_DL6_FE] = {
@@ -778,6 +918,7 @@ static struct snd_soc_dai_link mt8188_mt6359_dai_links[] = { }, .dynamic = 1, .dpcm_playback = 1, + .ops = &mt8188_hdmi_dptx_playback_ops, SND_SOC_DAILINK_REG(playback10), }, [DAI_LINK_DL11_FE] = {
@@ -833,6 +974,7 @@ static struct snd_soc_dai_link mt8188_mt6359_dai_links[] = { }, .dynamic = 1, .dpcm_capture = 1, + .ops = &mt8188_capture_ops, SND_SOC_DAILINK_REG(capture4), }, [DAI_LINK_UL5_FE] = {
@@ -844,6 +986,7 @@ static struct snd_soc_dai_link mt8188_mt6359_dai_links[] = { }, .dynamic = 1, .dpcm_capture = 1, + .ops = &mt8188_capture_ops, SND_SOC_DAILINK_REG(capture5), }, [DAI_LINK_UL6_FE] = {
@@ -1122,7 +1265,7 @@ static struct mt8188_card_data mt8188_evb_card = {static struct mt8188_card_data mt8188_nau8825_card = { .name ="mt8188_nau8825" , - .quirk =NAU8825_HS_PRESENT , + .quirk =NAU8825_HS_PRESENT |DPCM_FE_CONSTRAINT , };static const struct of_device_id mt8188_mt6359_dt_match[] = {
Signature · 1 line
2.18.0
Mark Brown
maintainerQuoted 3 lines · Trevor Wu
For certain projects, only a limited number of parameters are necessary. Therefore, it may be beneficial to add constraints that restrict the capacity of the PCM.
This commit message isn't entirely clear. The effect of the commit is to restrict the configurations supported when using a nau8825 but it's not clear what a nau8825 has to do with this or why we're doing this in general. What exactly do you mean when saying that "only a limited number of parameters are necessary" and what makes this the case?
Quoted 8 lines · Mark Brown
Quoted 5 lines · Trevor Wu
For certain projects, only a limited number of parameters are necessary.
Therefore, it may be beneficial to add constraints that restrict the
capacity of the PCM.
Quoted 8 lines
This commit message isn't entirely clear. The effect of the commit is
to restrict the configurations supported when using a nau8825 but it's
not clear what a nau8825 has to do with this or why we're doing this in
general. What exactly do you mean when saying that "only a limited number of parameters are necessary" and what makes this the case?
Hi Mark,
For instance, some userspace frameworks only support specific sampling rates such as 48kHz on Chromebook, making other parameters unnecessary. By restricting the configuration, unexpected usage can be prevented and the alsa_conformance_test process which checks all parameters provided by an ALSA driver can be sped up.
Although machine drivers can be reused for multiple projects, not all projects have the same criterion. Therefore, I will add the criterion only for mt8188_nau8825 which is used for Chromebook board. If there are similar criteria for other projects, they can be adopted in the same way. Perhaps a new constraint, such as DPCM_FE_CONSTRAINT1, could be introduced for different parameter combinations.
Would it be more beneficial to establish the criteria as a general rule for this machine driver, while limiting the use of the machine driver solely to the Chromebook project? Or do you just suggest that I add more details in the commit messages?
Thanks,
Trevor
Mark Brown
maintainerQuoted 11 lines · Trevor Wu (吳文良)
Quoted 8 lines · Mark Brown
This commit message isn't entirely clear. The effect of the commit is
to restrict the configurations supported when using a nau8825 but it's
not clear what a nau8825 has to do with this or why we're doing this in
general. What exactly do you mean when saying that "only a limited number of parameters are necessary" and what makes this the case?
Quoted 5 lines
For instance, some userspace frameworks only support specific sampling rates such as 48kHz on Chromebook, making other parameters unnecessary. By restricting the configuration, unexpected usage can be prevented and the
alsa_conformance_testprocess which checks all parameters provided by an ALSA driver can be sped up.
That's a userspace policy decision, we shouldn't be enforcing this in the kernel - even for Chromebooks people can install other OSs on them which may make different decisions, and it's always possible that the ChromeOS people might change their mind later. If they're only interested in testing 48kHz and it's slowing things down unreasonably to test more then they should just only test 48kHz rather than changing the driver to work around it.
Quoted 4 lines
Would it be more beneficial to establish the criteria as a general rule for this machine driver, while limiting the use of the machine driver solely to the Chromebook project? Or do you just suggest that I add more details in the commit messages?
I think we just shouldn't do this, it's policy for ChromeOS rather than something that's actually needed. If we were doing this it would need a much clearer commit message and we should be restricting things to Chromebooks only.
AngeloGioacchino Del Regno
maintainerIl 30/06/23 13:00, Mark Brown ha scritto:
Quoted 31 lines · Trevor Wu (吳文良)
Quoted 11 lines · Mark Brown
Quoted 9 lines
This commit message isn't entirely clear. The effect of the commit is
to restrict the configurations supported when using a nau8825 but it's
not clear what a nau8825 has to do with this or why we're doing this in
general. What exactly do you mean when saying that "only a limited number of parameters are necessary" and what makes this the case?Quoted 5 lines
For instance, some userspace frameworks only support specific sampling rates such as 48kHz on Chromebook, making other parameters unnecessary. By restricting the configuration, unexpected usage can be prevented and the
alsa_conformance_testprocess which checks all parameters provided by an ALSA driver can be sped up.That's a userspace policy decision, we shouldn't be enforcing this in the kernel - even for Chromebooks people can install other OSs on them which may make different decisions, and it's always possible that the ChromeOS people might change their mind later. If they're only interested in testing 48kHz and it's slowing things down unreasonably to test more then they should just only test 48kHz rather than changing the driver to work around it.
Quoted 4 lines
Would it be more beneficial to establish the criteria as a general rule for this machine driver, while limiting the use of the machine driver solely to the Chromebook project? Or do you just suggest that I add more details in the commit messages?
Quoted 4 lines
I think we just shouldn't do this, it's policy for ChromeOS rather than something that's actually needed. If we were doing this it would need a much clearer commit message and we should be restricting things to Chromebooks only.
I agree with Mark. Except for me it's not a *should not* but a *shall not*.
Such other configurations are supported by the hardware and it is the driver's duty to support all of them - otherwise I deem the driver to be *incomplete*. It's then the userspace's duty to properly use the sound APIs and request the right sampling rate for specific usecases.
Chromebooks aren't special at all in this regard.
Regards,
Angelo
Quoted 65 lines · AngeloGioacchino Del Regno
Il 30/06/23 13:00, Mark Brown ha scritto:
Quoted 4 lines · Trevor Wu (吳文良)
Quoted 3 lines · Mark Brown
Quoted 2 lines
This commit message isn't entirely clear. The effect of the
commit
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
is
to restrict the configurations supported when using a nau8825 but it's
not clear what a nau8825 has to do with this or why we're doingthis
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
in
general. What exactly do you mean when saying that "only alimited
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
number of parameters are necessary" and what makes this the case?
For instance, some userspace frameworks only support specific
sampling
Quoted 1 line
Quoted 1 line
rates such as 48kHz on Chromebook, making other parameters
unnecessary.
Quoted 1 line
Quoted 1 line
By restricting the configuration, unexpected usage can be
prevented and
Quoted 1 line
Quoted 1 line
the
alsa_conformance_testprocess which checks all parametersprovided
Quoted 3 lines
Quoted 1 line
by an ALSA driver can be sped up.
That's a userspace policy decision, we shouldn't be enforcing this
in
Quoted 1 line
the kernel - even for Chromebooks people can install other OSs on
them
Quoted 1 line
which may make different decisions, and it's always possible that
the
Quoted 2 lines
ChromeOS people might change their mind later. If they're only interested in testing 48kHz and it's slowing things down
unreasonably
Quoted 1 line
to test more then they should just only test 48kHz rather than
changing
Quoted 3 lines
the driver to work around it.
Quoted 1 line
Would it be more beneficial to establish the criteria as a general
rule
Quoted 1 line
Quoted 1 line
for this machine driver, while limiting the use of the machine
driver
Quoted 1 line
Quoted 1 line
solely to the Chromebook project? Or do you just suggest that I
add
Quoted 3 lines
Quoted 1 line
more details in the commit messages?
I think we just shouldn't do this, it's policy for ChromeOS rather
than
Quoted 1 line
something that's actually needed. If we were doing this it would
need a
Quoted 2 lines
much clearer commit message and we should be restricting things to Chromebooks only.
I agree with Mark. Except for me it's not a *should not* but a *shall not*.
Such other configurations are supported by the hardware and it is the driver's
duty to support all of them - otherwise I deem the driver to be *incomplete*.
It's then the userspace's duty to properly use the sound APIs and request the
right sampling rate for specific usecases.
Quoted 3 lines
Chromebooks aren't special at all in this regard.
Thanks for your suggestion.
After the internal discussion, we decided to drop the patch. On the other hand, I will send another patch using dpcm_merged_xxx to report the actual capability of hardware.
Thanks,
Trevor