Skip to contentSkip to conversation

admin: Access legacy registers using admin commands

PATCH Superseded Parav Pandit 2 participants 13 messages Jun 30, 2023 – Jul 4, 2023

v8 of 12 Superseded Latest is v12 →

lore
Share & tools
lore
#0 lore raw

v8 cover admin: Access legacy registers using admin commands

MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This short series introduces legacy registers access commands for the owner group member access the legacy registers of the member VFs.
This short series introduces legacy region access commands by the group owner device for its member devices.
Currently it is applicable to the PCI PF and VF devices. If in future any SIOV devices to support legacy registers, they can be easily supported using same commands by using the group member identifiers of the future SIOV devices.

More details as overview, motivation, use case are further described below.

Patch summary:
--------------
patch-1 split rows of admin opcode tables by a line patch-2 fix section numbering
patch-3 add generic legacy region access commands patch-4 add pci specific definition

Iadministation t uses the newly introduced administration command facility with 4 new commands which uses the existing virtio_admin_cmd and a new command to query the legacy notification region.

Usecase:
--------
1. A hypervisor/system needs to provide transitional virtio devices to the guest VM at scale of thousands, typically, one to eight devices per VM.

2. A hypervisor/system needs to provide such devices using a vendor agnostic driver in the hypervisor system.

3. A hypervisor system prefers to have single stack regardless of virtio device type (net/blk) and be future compatible with a single vfio stack using SR-IOV or other scalable device virtualization technology to map PCI devices to the guest VM. (as transitional or otherwise)

Motivation/Background:
----------------------
The existing virtio transitional PCI device is missing support for PCI SR-IOV based devices. Currently it does not work beyond PCI PF, or as software emulated device in reality. Currently it has below cited system level limitations:

[a] PCIe spec citation:
VFs do not support I/O Space and thus VF BARs shall not indicate I/O Space.

[b] cpu arch citiation:
Intel 64 and IA-32 Architectures Software Developer’s Manual:
The processor’s I/O address space is separate and distinct from the physical-memory address space. The I/O address space consists of 64K individually addressable 8-bit I/O ports, numbered 0 through FFFFH.

[c] PCIe spec citation:
If a bridge implements an I/O address range,...I/O address range will be aligned to a 4 KB boundary.

Overview:
---------
Above usecase requirements is solved by PCI PF group owner accessing its group member PCI VFs legacy registers using an admin virtqueue of the group owner PCI PF.

Two new admin virtqueue commands are added which read/write PCI VF registers.

Software usage example:
-----------------------
One way to use and map to the guest VM is by using vfio driver framework in Linux kernel.

                +----------------------+
                |pci_dev_id = 0x100X   |
+---------------|pci_rev_id = 0x0      |-----+
|vfio device    |BAR0 = I/O region     |     |
|               |Other attributes      |     |
|               +----------------------+     |
|                                            |
+   +--------------+     +-----------------+ |
|   |I/O BAR to AQ |     | Other vfio      | |
|   |rd/wr mapper  |     | functionalities | |
|   +--------------+     +-----------------+ |
|                                            |
+------+-------------------------+-----------+
       |                         |
   Legacy region            Driver notification
    access                       |
       |                         |
  +----+------------+       +----+------------+
  | +-----+         |       | PCI VF device A |
  | | AQ  |-------------+---->+-------------+ |
  | +-----+         |   |   | | legacy regs | |
  | PCI PF device   |   |   | +-------------+ |
  +-----------------+   |   +-----------------+
                        |
                        |   +----+------------+
                        |   | PCI VF device N |
                        +---->+-------------+ |
                            | | legacy regs | |
                            | +-------------+ |
                            +-----------------+

2. Virtio pci driver to bind to the listed device id and use it in the host.

3. Use it in a light weight hypervisor to run bare-metal OS.

Please review.

Alternatives considered:
========================
1. Exposing BAR0 as MMIO BAR that follows legacy registers template Pros:
a. Kind of works with legacy drivers as some of them have used API
which is agnostic to MMIO vs IOBAR.
b. Does not require hypervisor intervantion
Cons:
a. Device reset is extremely hard to implement in device at scale as
driver does not wait for device reset completion
b. Device register width related problems persist that hypervisor if
wishes, it cannot be fixed.

2. Accessing VF registers by tunneling it through new legacy PCI capability Pros:
a. Self contained, but cannot work with future PCI SIOV devices Cons:
a. Equally slow as AQ access
b. Still requires new capability for notification access
c. Requires hardware to build low level registers access which is not worth
for long term future

3. Accessing VF notification region using new PF BAR
Cons:
a. Requires hardware to build new PCI steering logic per PF to forward
notification from the PF to VF, requires double the amount of logic compared to today
b. Requires very large additional PF BAR whose size must be max_Vfs * BAR size.

4. Trapping CVQ, configuration region, LEGACY_HDR
Cons:
a. This does not fullfil the very basic requirement to not trap the
1.x objects (configuration registers, vqs)
b. Requires feature negotiations mediation in hypervisor software c. Requires constant device type specific knowledge in hypervisor driver
(Does not scale for 30+ device types)

4. F_LEACY_HDR, F_WRITE_MAC
Cons:
a. Requires device support to have read/write mac address which is
hard to implement on every member device.
b. such functionality is duplicate of existing cvq per device. c. config space is only for the initialization specific purpose. d. Requires mediation of 1.x objects, which is not good design. e. Solves only for the net device.
Pros:
a. May work for nested env

conclusion for picking AQ approach:
==================================
1. Overall AQ based access is simpler to implement with combination of best from software and device so that legacy registers do not get baked in the device hardware
2. AQ allows hypervisor software to intercept legacy registers and make corrections if needed
3. Provides trade-off between performance, device complexity vs spec, while still maintaining passthrough mode for the VFs with minimal hypervisor intercepts only for legacy registers access
4. AQ mechanism is designed for accessing other member devices registers as noted in AQ submission, it utilizes the existing infrastructure over other alternatives.
5. Uses existing driver notification region similar to legacy notification saves hardware resources

---
changelog:
v7->v8:
- remove empty line at the end of file
- removed white space at the end
- addressed comments from Michael add link to pci
- renamed region to region_data
- made region_data width to be 16 bytes to cover for 8 bytes offset
- moved generic notification region related normative from pci to generic section
- addressed comments from Michael
- made bar offset 64-bit
- prefix legacy specific structure with _legacy
- moved generic normative from pci to generic section
- added link to virtio pci capabilities when referring to bar 0
- remove 'should' from generic description
v6->v7:
- addressed several comments from Michael
- use AQ command to query legacy notify region, dropped pci capability modifications
- moved most part of the text to the generic admin command section
- replace administrative to administration
- replace admin vq citation to admin commands
- added normatives for device and driver side
- made BAR0 to be not used at all when supporting legacy interface
- added normative around BAR0 and SR-IOV extended capability
- grammar corrections
v5->v6:
- fixed previous missed abbreviation of LCC and LD
- added text for the PCI capability for the group member device v4->v5:
- split pci transport and generic command section to new patch
- removed multiple references to the VF
- written the description of the command as generic with member
and group device terminology
- reflected many section names to remove VF
- split from pci transport specific patch
- split conformance to transport and generic sections
- written the description of the command as generic with member
and group device terminology
- reflected many section names to remove VF
- rename fields from register to region
- avoided abbreviation for legacy, device and config
v3->v4:
- moved noted to the conformance section details in next patch
- removed queue notify address query AQ command on Michael's suggestion, though it is fine. Instead replaced with extending virtio_pci_notify_cap to indicate that legacy queue notifications can be done on the notification location
- fixed spelling errors
- replaced administrative virtqueue to administration virtqueue
- moved legacy interface normative references to legacy conformance section
v2->v3:
- added new patch to split raws of admin vq opcode table
- adddressed Jason and Michael's comment to split single register access command to common config and device specific commands.
- dropped the suggetion to introduce enable/disable command as
admin command cap bit already covers it.
- added other alternative design considered and discussed in detail in v0, v1 and v2 v1->v2:
- addressed comments from Michael
- added theory of operation
- grammar corrections
- removed group fields description from individual commands as
it is already present in generic section
- added endianness normative for legacy device registers region
- renamed the file to drop vf and add legacy prefix
- added overview in commit log
- renamed subsection to reflect command
v0->v1:
- addressed comments, suggesetions and ideas from Michael Tsirkin and Jason Wang
- far more simpler design than MMR access
- removed complexities of MMR device ids
- removed complexities of MMR registers and extended capabilities
- dropped adding new extended capabilities because if if they are added, a pci device still needs to have existing capabilities
in the legacy configuration space and hypervisor driver do not
need to access them

Parav Pandit (4):
admin: Split opcode table rows with a line
admin: Fix section numbering
admin: Add group member legacy register access commands
transport-pci: Introduce group legacy group member config region
access

 admin-cmds-legacy-interface.tex | 206 ++++++++++++++++++++++++++++++++
 admin.tex                       |  20 +++-
 conformance.tex                 |   3 +
 transport-pci-legacy-regs.tex   |  41 +++++++
 transport-pci.tex               |   2 +
 5 files changed, 269 insertions(+), 3 deletions(-)
 create mode 100644 admin-cmds-legacy-interface.tex
 create mode 100644 transport-pci-legacy-regs.tex
Signature · 18 lines
2.26.2


This publicly archived list offers a means to provide input to the
OASIS Virtual I/O Device (VIRTIO) TC.

In order to verify user consent to the Feedback License terms and
to minimize spam in the list archive, subscription is required
before posting.

Subscribe: [email protected]
Unsubscribe: [email protected]
List help: [email protected]
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/
#1 lore raw

PATCH v8 1/4 admin: Split opcode table rows with a line

Currently all opcode appears to be in a single row. Separate them with a line similar to other tables.

---
changelog:
v2->v3:
- new patch

---
 admin.tex | 2 ++
 1 file changed, 2 insertions(+)
admin.tex +2 -0
index 2efd4d7..e51f9e6 100644
@@ -114,7 +114,9 @@ \subsection{Group administration commands}\label{sec:Basic Facilities of a Virti
 opcode & Name & Command Description \\
 \hline \hline
 0x0000 & VIRTIO_ADMIN_CMD_LIST_QUERY & Provides to driver list of commands supported for this group type    \\
+\hline
 0x0001 & VIRTIO_ADMIN_CMD_LIST_USE & Provides to device list of commands used for this group type \\
+\hline
 0x0002 - 0x7FFF & - & Commands using \field{struct virtio_admin_cmd}    \\
 \hline
 0x8000 - 0xFFFF & - & Reserved for future commands (possibly using a different structure)    \\
Signature · 18 lines
2.26.2


This publicly archived list offers a means to provide input to the
OASIS Virtual I/O Device (VIRTIO) TC.

In order to verify user consent to the Feedback License terms and
to minimize spam in the list archive, subscription is required
before posting.

Subscribe: [email protected]
Unsubscribe: [email protected]
List help: [email protected]
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/
#2 lore raw

PATCH v8 2/4 admin: Fix section numbering

In reply to Parav Pandit

Requirements are put one additional level down. Fix it.

---
changelog:
v4->v5:
- new patch

---
 admin.tex | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
admin.tex +2 -2
index e51f9e6..fd3b97d 100644
@@ -286,7 +286,7 @@ \subsection{Group administration commands}\label{sec:Basic Facilities of a Virti
 supporting multiple group types, the list of supported commands
 might differ between different group types.
 
-\devicenormative{\paragraph}{Group administration commands}{Basic Facilities of a Virtio Device / Device groups / Group administration commands}
+\devicenormative{\subsubsection}{Group administration commands}{Basic Facilities of a Virtio Device / Device groups / Group administration commands}
 
 The device MUST validate \field{opcode}, \field{group_type} and
 \field{group_member_id}, and if any of these has an invalid or
@@ -378,7 +378,7 @@ \subsection{Group administration commands}\label{sec:Basic Facilities of a Virti
 \field{VF Enable} refer to registers within the SR-IOV Extended
 Capability as specified by \hyperref[intro:PCIe]{[PCIe]}.
 
-\drivernormative{\paragraph}{Group administration commands}{Basic Facilities of a Virtio Device / Device groups / Group administration commands}
+\drivernormative{\subsubsection}{Group administration commands}{Basic Facilities of a Virtio Device / Device groups / Group administration commands}
 
 The driver MAY discover whether device supports a specific group type
 by issuing VIRTIO_ADMIN_CMD_LIST_QUERY with the matching
Signature · 6 lines
2.26.2


---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
#3 lore raw

PATCH v8 3/4 admin: Add group member legacy register access commands

In reply to Parav Pandit

Introduce group member legacy common configuration and legacy device configuration access read/write commands.

Group member legacy registers access commands enable group owner driver software to access legacy registers on behalf of the guest virtual machine.

Usecase:
========
1. A hypervisor/system needs to provide transitional virtio devices to the guest VM at scale of thousands, typically, one to eight devices per VM.

2. A hypervisor/system needs to provide such devices using a vendor agnostic driver in the hypervisor system.

3. A hypervisor system prefers to have single stack regardless of virtio device type (net/blk) and be future compatible with a single vfio stack using SR-IOV or other scalable device virtualization technology to map PCI devices to the guest VM. (as transitional or otherwise)

Motivation/Background:
=====================
The existing virtio transitional PCI device is missing support for PCI SR-IOV based devices. Currently it does not work beyond PCI PF, or as software emulated device in reality. Currently it has below cited system level limitations:

[a] PCIe spec citation:
VFs do not support I/O Space and thus VF BARs shall not indicate I/O Space.

[b] cpu arch citiation:
Intel 64 and IA-32 Architectures Software Developer’s Manual:
The processor’s I/O address space is separate and distinct from the physical-memory address space. The I/O address space consists of 64K individually addressable 8-bit I/O ports, numbered 0 through FFFFH.

[c] PCIe spec citation:
If a bridge implements an I/O address range,...I/O address range will be aligned to a 4 KB boundary.

Overview:
=========
Above usecase requirements is solved by PCI PF group owner accessing its group member PCI VFs legacy registers using the administration commands of the group owner PCI PF.

Two types of administration commands are added which read/write PCI VF registers.

Software usage example:
=======================

1. One way to use and map to the guest VM is by using vfio driver framework in Linux kernel.

                +----------------------+
                |pci_dev_id = 0x100X   |
+---------------|pci_rev_id = 0x0      |-----+
|vfio device    |BAR0 = I/O region     |     |
|               |Other attributes      |     |
|               +----------------------+     |
|                                            |
+   +--------------+     +-----------------+ |
|   |I/O BAR to AQ |     | Other vfio      | |
|   |rd/wr mapper& |     | functionalities | |
|   | forwarder    |     |                 | |
|   +--------------+     +-----------------+ |
|                                            |
+------+-------------------------+-----------+
       |                         |
   Config region                 |
     access                Driver notifications
       |                         |
  +----+------------+       +----+------------+
  | +-----+         |       | PCI VF device A |
  | | AQ  |-------------+---->+-------------+ |
  | +-----+         |   |   | | legacy regs | |
  | PCI PF device   |   |   | +-------------+ |
  +-----------------+   |   +-----------------+
                        |
                        |   +----+------------+
                        |   | PCI VF device N |
                        +---->+-------------+ |
                            | | legacy regs | |
                            | +-------------+ |
                            +-----------------+

2. Continue to use the virtio pci driver to bind to the listed device id and use it as in the host.

3. Use it in a light weight hypervisor to run bare-metal OS.

---
changelog:
v7->v8:
- remove empty line at the end of file
- removed white space at the end
- addressed comments from Michael add link to pci
- renamed region to region_data
- made region_data width to be 16 bytes to cover for 8 bytes offset
- moved generic notification region related normative from pci to generic section
v6->v7:
- changed administrative to administration
- renamed admin-access.tex to admin-interface.tex
- large rewrite ad generic admin commands instead of pci
- added theory of operation section
- added driver notification region query command
v5->v6:
- fixed previous missed abbreviation of LCC and LD v4->v5:
- split from pci transport specific patch
- split conformance to transport and generic sections
- written the description of the command as generic with member and group device terminology
- reflected many section names to remove VF
- rename fields from register to region
- avoided abbreviation for legacy, device and config

---
 admin-cmds-legacy-interface.tex | 206 ++++++++++++++++++++++++++++++++
 admin.tex                       |  14 ++-
 conformance.tex                 |   2 +
 3 files changed, 221 insertions(+), 1 deletion(-)
 create mode 100644 admin-cmds-legacy-interface.tex
admin-cmds-legacy-interface.tex new file +206 -0
new file mode 100644
index 0000000..8036a0b
@@ -0,0 +1,206 @@
+\subsubsection{Legacy Interfaces}\label{sec:Basic Facilities of a Virtio Device / Device groups / Group
+administration commands / Legacy Interface}
+
+When the member device cannot support certain transport specific
+functionality of a legacy interface, it is difficult to compose a
+transitional group member device. In such scenario, a owner device
+can provide the legacy interface functionality. With such support,
+the member device driver can utilize the group owner device driver legacy
+interface functionality, thereby it can supply either a transitional device
+or a legacy device for the guest virtual machine. For example a PCI VF
+group member device do not support I/O BAR region functionality. For such
+limitation, a PCI PF group owner device support accessing member device's legacy
+configuration region using the administration commands. These administration
+commands are executed by the driver of the owner device when requested by the
+driver of the member device. For example, the member device driver
+intercepts configuration accesses done by the legacy driver and forwards
+such access request to the owner device driver; the owner device driver fulfil
+such requests by executing administration commands on the group owner device.
+
+The group owner device support following administration commands for legacy
+commong configuration and device configuration region access:
+
+\begin{enumerate}
+\item Legacy Common Configuration Region Write Command
+\item Legacy Common Configuration Region Read Command
+\item Legacy Device Configuration Region Write Command
+\item Legacy Device Configuration Region Read Command
+\end{enumerate}
+
+Accessing the member device legacy regions using these commands has the same
+effect as accessing it using the the legacy interface defined by the transport
+of the member device.
+
+\paragraph{Legacy Common Configuration Region Write Command}\label{par:Basic Facilities of a Virtio Device / Device groups / Group
+administration commands / Legacy Interface / Common Configuration Region Write Command}
+
+This command writes in a legacy common configuration region of a group member device.
+This command follows \field{struct virtio_admin_cmd}.
+This command uses following structure for \field{command_specific_data}:
+
+\begin{lstlisting}
+struct virtio_admin_cmd_legacy_common_cfg_wr_data {
+        u8 offset; /* Starting byte offset of the common configuration region to write */
+        u8 region_data[];
+};
+\end{lstlisting}
+
+The driver sets command \field{opcode} to VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_WRITE.
+The driver sets valid \field{offset} and associated \field{region_data} bytes to
+write to the common configuration region.
+
+This command does not have any command specific result.
+
+\paragraph{Legacy Common Configuration Region Read Command}\label{par:Basic Facilities of a Virtio Device / Device groups / Group administration commands / Legacy Interface / Common Configuration Region Read Command}
+
+This command reads from a legacy common configuration region of a group member device.
+This command follows \field{struct virtio_admin_cmd}.
+This command uses following structure for \field{command_specific_data}:
+
+\begin{lstlisting}
+struct virtio_admin_cmd_legacy_common_cfg_rd_data {
+	u8 offset; /* Starting byte offset of the common configuration region to read */
+};
+\end{lstlisting}
+
+The driver sets command \field{opcode} to VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_READ.
+
+The driver sets valid \field{offset} of the region from where to read
+\field{region_data}.
+
+When command completes successfully, \field{command_specific_result}
+uses following structure:
+
+\begin{lstlisting}
+struct virtio_admin_cmd_legacy_common_cfg_rd_result {
+        u8 region_data[];
+};
+\end{lstlisting}
+
+\paragraph{Legacy Device Configuration Region Write Command}\label{par:Basic Facilities of a Virtio Device / Device groups / Group administration commands / Legacy Interface / Device Configuration Region Write Command}
+
+This command writes in a legacy device configuration region of a group member device.
+This command follows \field{struct virtio_admin_cmd}.
+This command uses following structure for \field{command_specific_data}:
+
+\begin{lstlisting}
+struct virtio_admin_cmd_legacy_dev_reg_wr_data {
+        u8 offset; /* Starting byte offset of the device configuration region to write */
+        u8 region_data[];
+};
+\end{lstlisting}
+
+The driver sets command \field{opcode} to VIRTIO_ADMIN_CMD_LEGACY_DEV_REG_WRITE.
+The driver sets valid \field{offset} and associated \field{region_data} bytes to
+the device configuration region.
+
+This command does not have any command specific result.
+
+\paragraph{Legacy Device Configuration Region Write Command}\label{par:Basic Facilities of a Virtio Device / Device groups / Group administration commands / Legacy Interface / Device Configuration Region Read Command}
+
+This command reads from a legacy device configuration region of a group member device.
+This command follows \field{struct virtio_admin_cmd}.
+
+This command uses following structure for \field{command_specific_data}:
+
+\begin{lstlisting}
+struct virtio_admin_cmd_legacy_dev_cfg_rd_data {
+        u8 offset; /* Starting byte offset of the device configuration region to read */
+};
+\end{lstlisting}
+
+The driver sets command \field{opcode} to VIRTIO_ADMIN_CMD_LEGACY_DEV_REG_READ.
+The driver sets valid \field{offset} of the device configurationi region from
+where to read \field{region_data}.
+
+When command completes successfully, \field{command_specific_result}
+uses following structure:
+
+\begin{lstlisting}
+struct virtio_admin_cmd_legacy_dev_reg_rd_result {
+        u8 region_data[];
+};
+\end{lstlisting}
+
+\paragraph{Legacy Driver Notification Region Query}\label{par:Basic Facilities of a Virtio Device / Device groups / Group administration commands / Legacy Interface / Legacy Driver Notifications Region Query}
+
+Even though the driver notifications can be communicated through the
+administration command, if the group owner device or group member device
+supports such notifications using a memory-mapped operation or I/O operation,
+they are sent to the device by accessing this notification region using memory
+or I/O operation.
+
+A group owner device optionally support querying driver notifications region
+using VIRTIO_ADMIN_CMD_LEGACY_NOTIFY_QUERY command.
+
+The driver sets command \field{opcode} to VIRTIO_ADMIN_CMD_LEGACY_NOTIFY_QUERY.
+This command does not have any command specific data.
+
+When command completes successfully, \field{command_specific_result}
+uses following structure:
+
+\begin{lstlisting}
+struct virtio_admin_cmd_legacy_notify_query_entry {
+        u8 region_data[16];
+};
+
+struct virtio_admin_cmd_legacy_notify_query_result {
+	struct virtio_virtio_admin_cmd_legacy_notify_query_entry entries[];
+};
+\end{lstlisting}
+
+The driver should pick the suitable entry when multiple entries are supplied
+by the device.
+
+Refer to the specific transport section for the definition of the
+\field{region_data}.
+
+\devicenormative{\paragraph}{Legacy Interface}{Basic Facilities of a Virtio Device / Device groups / Group administration commands / Legacy Interface}
+
+If the group owner device supports legacy region access for its group member
+devices, the device MUST set all corresponding bits for commands
+VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_WRITE,
+VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_READ,
+VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_WRITE and VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_READ in
+the command result of VIRTIO_ADMIN_CMD_LIST_QUERY in
+\field{device_admin_cmd_opcodes}.
+
+The device MUST encode and decode legacy device specific registers using
+little-endian format.
+
+The device MUST fail VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_WRITE and
+VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_READ commands for the invalid offset
+which is outside the legacy common configuration region's address range.
+
+The device MUST fail VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_WRITE,
+VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_READ commands for the invalid offset
+which is outside the legacy device specific region's address range.
+
+The device SHOULD support VIRTIO_ADMIN_CMD_LEGACY_NOTIFY_QUERY command for
+driver notifications. If the group owner device supports driver
+notifications region for its group member devices, the device MUST set
+VIRTIO_ADMIN_CMD_LEGACY_NOTIFY_QUERY in the command result of
+VIRTIO_ADMIN_CMD_LIST_QUERY in \field{device_admin_cmd_opcodes}.
+
+When the driver accesses the legacy region of the member device using
+VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_WRITE,
+VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_READ,
+VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_WRITE, VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_READ
+commands, device MUST function as if they are accessed by the legacy interface
+defined by the transport of the member device.
+
+\drivernormative{\paragraph}{Legacy Interface}{Basic Facilities of a Virtio Device / Device groups / Group administration commands / Legacy Interface}
+
+The driver MUST encode and decode legacy device specific registers using
+little-endian format.
+
+The driver SHOULD send VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_WRITE and
+VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_READ commands with a valid offset which
+is in the legacy common configuration region address range.
+
+The driver SHOULD send commands VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_WRITE and
+VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_READ with a valid offset which is in the legacy
+device specific configuration region address range.
+
+The group member driver SHOULD use the notification region supplied by the group
+owner device.
admin.tex +13 -1
index fd3b97d..0de26a9 100644
@@ -117,7 +117,17 @@ \subsection{Group administration commands}\label{sec:Basic Facilities of a Virti
 \hline
 0x0001 & VIRTIO_ADMIN_CMD_LIST_USE & Provides to device list of commands used for this group type \\
 \hline
-0x0002 - 0x7FFF & - & Commands using \field{struct virtio_admin_cmd}    \\
+0x0002 & VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_WRITE & Write legacy common configuration region of a member device \\
+\hline
+0x0003 & VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_READ & Read legacy common configuration region of a member device \\
+\hline
+0x0004 & VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_WRITE & Write legacy device configuration region of a member device \\
+\hline
+0x0005 & VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_READ & Read legacy device configuration region of a member device \\
+\hline
+0x0006 & VIRTIO_ADMIN_CMD_LEGACY_DEV_NOTIFY_QUERY & Query notification region for a member device \\
+\hline
+0x0007 - 0x7FFF & - & Commands using \field{struct virtio_admin_cmd}    \\
 \hline
 0x8000 - 0xFFFF & - & Reserved for future commands (possibly using a different structure)    \\
 \hline
@@ -286,6 +296,8 @@ \subsection{Group administration commands}\label{sec:Basic Facilities of a Virti
 supporting multiple group types, the list of supported commands
 might differ between different group types.
 
+\input{admin-cmds-legacy-interface.tex}
+
 \devicenormative{\subsubsection}{Group administration commands}{Basic Facilities of a Virtio Device / Device groups / Group administration commands}
 
 The device MUST validate \field{opcode}, \field{group_type} and
conformance.tex +2 -0
index 01ccd69..dc00e84 100644
@@ -260,6 +260,8 @@ \section{Conformance Targets}\label{sec:Conformance / Conformance Targets}
 \item Section \ref{sec:Basic Facilities of a Virtio Device / Virtqueues / Legacy Interfaces: A Note on Virtqueue Layout}
 \item Section \ref{sec:Basic Facilities of a Virtio Device / Virtqueues / Legacy Interfaces: A Note on Virtqueue Endianness}
 \item Section \ref{sec:Basic Facilities of a Virtio Device / Virtqueues / Message Framing / Legacy Interface: Message Framing}
+\item Section \ref{devicenormative:Basic Facilities of a Virtio Device / Device groups / Group administration commands / Legacy Interface}
+\item Section \ref{drivernormative:Basic Facilities of a Virtio Device / Device groups / Group administration commands / Legacy Interface}
 \item Section \ref{sec:General Initialization And Device Operation / Device Initialization / Legacy Interface: Device Initialization}
 \item Section \ref{sec:Virtio Transport Options / Virtio Over PCI Bus / PCI Device Discovery / Legacy Interfaces: A Note on PCI Device Discovery}
 \item Section \ref{sec:Virtio Transport Options / Virtio Over PCI Bus / PCI Device Layout / Legacy Interfaces: A Note on PCI Device Layout}
Signature · 18 lines
2.26.2


This publicly archived list offers a means to provide input to the
OASIS Virtual I/O Device (VIRTIO) TC.

In order to verify user consent to the Feedback License terms and
to minimize spam in the list archive, subscription is required
before posting.

Subscribe: [email protected]
Unsubscribe: [email protected]
List help: [email protected]
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/
#4 lore raw

[virtio-comment] Re: [PATCH v8 3/4] admin: Add group member legacy register access commands

Quoted 143 lines · Parav Pandit

Introduce group member legacy common configuration and legacy device configuration access read/write commands.

Group member legacy registers access commands enable group owner driver software to access legacy registers on behalf of the guest virtual machine.

Usecase:
========
1. A hypervisor/system needs to provide transitional virtio devices to the guest VM at scale of thousands, typically, one to eight devices per VM.

2. A hypervisor/system needs to provide such devices using a vendor agnostic driver in the hypervisor system.

3. A hypervisor system prefers to have single stack regardless of virtio device type (net/blk) and be future compatible with a single vfio stack using SR-IOV or other scalable device virtualization technology to map PCI devices to the guest VM. (as transitional or otherwise)

Motivation/Background:
=====================
The existing virtio transitional PCI device is missing support for PCI SR-IOV based devices. Currently it does not work beyond PCI PF, or as software emulated device in reality. Currently it has below cited system level limitations:

[a] PCIe spec citation:
VFs do not support I/O Space and thus VF BARs shall not indicate I/O Space.

[b] cpu arch citiation:
Intel 64 and IA-32 Architectures Software Developer’s Manual:
The processor’s I/O address space is separate and distinct from the physical-memory address space. The I/O address space consists of 64K individually addressable 8-bit I/O ports, numbered 0 through FFFFH.

[c] PCIe spec citation:
If a bridge implements an I/O address range,...I/O address range will be aligned to a 4 KB boundary.

Overview:
=========
Above usecase requirements is solved by PCI PF group owner accessing its group member PCI VFs legacy registers using the administration commands of the group owner PCI PF.

Two types of administration commands are added which read/write PCI VF registers.

Software usage example:
=======================

1. One way to use and map to the guest VM is by using vfio driver framework in Linux kernel.

                +----------------------+
                |pci_dev_id = 0x100X   |
+---------------|pci_rev_id = 0x0      |-----+
|vfio device    |BAR0 = I/O region     |     |
|               |Other attributes      |     |
|               +----------------------+     |
|                                            |
+   +--------------+     +-----------------+ |
|   |I/O BAR to AQ |     | Other vfio      | |
|   |rd/wr mapper& |     | functionalities | |
|   | forwarder    |     |                 | |
|   +--------------+     +-----------------+ |
|                                            |
+------+-------------------------+-----------+
       |                         |
   Config region                 |
     access                Driver notifications
       |                         |
  +----+------------+       +----+------------+
  | +-----+         |       | PCI VF device A |
  | | AQ  |-------------+---->+-------------+ |
  | +-----+         |   |   | | legacy regs | |
  | PCI PF device   |   |   | +-------------+ |
  +-----------------+   |   +-----------------+
                        |
                        |   +----+------------+
                        |   | PCI VF device N |
                        +---->+-------------+ |
                            | | legacy regs | |
                            | +-------------+ |
                            +-----------------+

2. Continue to use the virtio pci driver to bind to the listed device id and use it as in the host.

3. Use it in a light weight hypervisor to run bare-metal OS.

---
changelog:
v7->v8:
- remove empty line at the end of file
- removed white space at the end
- addressed comments from Michael add link to pci
- renamed region to region_data
- made region_data width to be 16 bytes to cover for 8 bytes offset
- moved generic notification region related normative from pci to generic section
v6->v7:
- changed administrative to administration
- renamed admin-access.tex to admin-interface.tex
- large rewrite ad generic admin commands instead of pci
- added theory of operation section
- added driver notification region query command
v5->v6:
- fixed previous missed abbreviation of LCC and LD v4->v5:
- split from pci transport specific patch
- split conformance to transport and generic sections
- written the description of the command as generic with member and group device terminology
- reflected many section names to remove VF
- rename fields from register to region
- avoided abbreviation for legacy, device and config

---
 admin-cmds-legacy-interface.tex | 206 ++++++++++++++++++++++++++++++++
 admin.tex                       |  14 ++-
 conformance.tex                 |   2 +
 3 files changed, 221 insertions(+), 1 deletion(-)
 create mode 100644 admin-cmds-legacy-interface.tex
admin-cmds-legacy-interface.tex new file +7 -0
new file mode 100644
index 0000000..8036a0b
@@ -0,0 +1,206 @@
+\subsubsection{Legacy Interfaces}\label{sec:Basic Facilities of a Virtio Device / Device groups / Group
+administration commands / Legacy Interface}
+
+When the member device cannot support certain transport specific
+functionality of a legacy interface, it is difficult to compose a
+transitional group member device. In such scenario, a owner device
+can provide the legacy interface functionality.

With such support,

admin-cmds-legacy-interface.tex

Quoted 3 lines
admin-cmds-legacy-interface.tex new file +3 -0
+the member device driver can utilize the group owner device driver legacy
+interface functionality, thereby it can supply either a transitional device
+or a legacy device for the guest virtual machine.

In some systems, there's need to support utilizing legacy drivers with devices that do not directly support the legacy interface. In such scenarios, an owner device of a group
can provide the legacy interface functionality for group members. The driver of an owner device can then access the legacy interface of a member device on behalf of the legacy member device driver.

admin-cmds-legacy-interface.tex line 18

Quoted 10 lines

For example a PCI VF
+group member device
do not support I/O BAR region functionality. For such

admin-cmds-legacy-interface.tex new file +7 -0
+limitation, a PCI PF group owner device support accessing member device's legacy
+configuration region using the administration commands. These administration
+commands are executed by the driver of the owner device when requested by the
+driver of the member device. For example, the member device driver
+intercepts configuration accesses done by the legacy driver and forwards
+such access request to the owner device driver; the owner device driver fulfil
+such requests by executing administration commands on the group owner device.

For example, with the SR-IOV group type, group members (VFs) can not present a legacy interface in an I/O BAR in BAR0 as expected by the legacy pci driver. If the legacy driver is running inside a virtual machine, the hypervisor executing the virtual machine can present a virtual device with an I/O BAR in BAR0, intercept the legacy driver accesses to this I/O BAR and forward them to the driver of the group owner device (PF) using group administration commands.

admin-cmds-legacy-interface.tex line 21

Quoted 2 lines
admin-cmds-legacy-interface.tex new file +2 -0
+The group owner device support following administration commands for legacy
+commong configuration and device configuration region access:

The following commands support such legacy interface functionality:

Quoted 7 lines

+
+\begin{enumerate}
+\item Legacy Common Configuration Region Write Command +\item Legacy Common Configuration Region Read Command +\item Legacy Device Configuration Region Write Command +\item Legacy Device Configuration Region Read Command +\end{enumerate}

\begin{enumerate}
\item Legacy Interface Common Configuration Write Command \item Legacy Interface Common Configuration Read Command \item Legacy Interface Device Configuration Write Command \item Legacy Interface Device Configuration Read Command \end{enumerate}

admin-cmds-legacy-interface.tex line 32

Quoted 4 lines
admin-cmds-legacy-interface.tex new file +4 -0
+
+Accessing the member device legacy regions using these commands has the same
+effect as accessing it using the the legacy interface defined by the transport
+of the member device.

These commands are currently only defined for the SR-IOV group type
and have, generally, the same effect as member device
accesses through a legacy interface.
See sec:Virtio Transport Options / Virtio Over PCI Bus / PCI Device Layout / Legacy Interfaces: A Note on PCI Device Layout

admin-cmds-legacy-interface.tex line 35

Quoted 3 lines
admin-cmds-legacy-interface.tex new file +3 -0
+
+\paragraph{Legacy Common Configuration Region Write Command}\label{par:Basic Facilities of a Virtio Device / Device groups / Group
+administration commands / Legacy Interface / Common Configuration Region Write Command}

Legacy Interface Common Configuration Write Command

and fix the label accordingly.

admin-cmds-legacy-interface.tex

Quoted 2 lines
admin-cmds-legacy-interface.tex new file +2 -0
+
+This command writes in a legacy common configuration region of a group member device.

This command has the same effect as writing into the virtio common configuration structure (excluding the device-specific configuration)
through the legacy interface.

Quoted 1 line

+This command follows \field{struct virtio_admin_cmd}.

drop this.

Quoted 1 line

+This command uses following structure for \field{command_specific_data}:

\field{command_specific_data} has the following structure:

admin-cmds-legacy-interface.tex line 50

Quoted 10 lines
admin-cmds-legacy-interface.tex new file +10 -0
+
+\begin{lstlisting}
+struct virtio_admin_cmd_legacy_common_cfg_wr_data {
+        u8 offset; /* Starting byte offset of the common configuration region to write */
+        u8 region_data[];
+};
+\end{lstlisting}
+
+The driver sets valid \field{offset} and associated \field{region_data} bytes to
+write to the common configuration region.

The command has the same effect as writing \field{region_data} at offset \field{offset} the virtio common configuration structure when using the legacy interface. The length of \field{region_data} is simply the length of \field{struct virtio_admin_cmd_legacy_common_cfg_wr_data}, minus 1 (for \field{offset}).

admin-cmds-legacy-interface.tex

Quoted 2 lines
admin-cmds-legacy-interface.tex new file +2 -0
+
+This command does not have any command specific result.

This command does not use \field{command_specific_result}.

---------------------------------

Got up to this point. Can you try changing the rest to match?

Quoted 26 lines
admin-cmds-legacy-interface.tex new file +26 -0
+
+\paragraph{Legacy Common Configuration Region Read Command}\label{par:Basic Facilities of a Virtio Device / Device groups / Group administration commands / Legacy Interface / Common Configuration Region Read Command}
+
+This command reads from a legacy common configuration region of a group member device.
+This command follows \field{struct virtio_admin_cmd}.
+This command uses following structure for \field{command_specific_data}:
+
+\begin{lstlisting}
+struct virtio_admin_cmd_legacy_common_cfg_rd_data {
+	u8 offset; /* Starting byte offset of the common configuration region to read */
+};
+\end{lstlisting}
+
+The driver sets command \field{opcode} to VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_READ.
+
+The driver sets valid \field{offset} of the region from where to read
+\field{region_data}.
+
+When command completes successfully, \field{command_specific_result}
+uses following structure:
+
+\begin{lstlisting}
+struct virtio_admin_cmd_legacy_common_cfg_rd_result {
+        u8 region_data[];
+};
+\end{lstlisting}

admin-cmds-legacy-interface.tex line 88

Quoted 10 lines
admin-cmds-legacy-interface.tex new file +10 -0
+
+\paragraph{Legacy Device Configuration Region Write Command}\label{par:Basic Facilities of a Virtio Device / Device groups / Group administration commands / Legacy Interface / Device Configuration Region Write Command}
+
+This command writes in a legacy device configuration region of a group member device.
+This command follows \field{struct virtio_admin_cmd}.
+This command uses following structure for \field{command_specific_data}:
+
+\begin{lstlisting}
+struct virtio_admin_cmd_legacy_dev_reg_wr_data {
+        u8 offset; /* Starting byte offset of the device configuration region to write */

let's add some padding? Maybe 7 bytes? Will help align region_data too.

Quoted 165 lines
admin-cmds-legacy-interface.tex new file +118 -0
+        u8 region_data[];
+};
+\end{lstlisting}
+
+The driver sets command \field{opcode} to VIRTIO_ADMIN_CMD_LEGACY_DEV_REG_WRITE.
+The driver sets valid \field{offset} and associated \field{region_data} bytes to
+the device configuration region.
+
+This command does not have any command specific result.
+
+\paragraph{Legacy Device Configuration Region Write Command}\label{par:Basic Facilities of a Virtio Device / Device groups / Group administration commands / Legacy Interface / Device Configuration Region Read Command}
+
+This command reads from a legacy device configuration region of a group member device.
+This command follows \field{struct virtio_admin_cmd}.
+
+This command uses following structure for \field{command_specific_data}:
+
+\begin{lstlisting}
+struct virtio_admin_cmd_legacy_dev_cfg_rd_data {
+        u8 offset; /* Starting byte offset of the device configuration region to read */
+};
+\end{lstlisting}
+
+The driver sets command \field{opcode} to VIRTIO_ADMIN_CMD_LEGACY_DEV_REG_READ.
+The driver sets valid \field{offset} of the device configurationi region from
+where to read \field{region_data}.
+
+When command completes successfully, \field{command_specific_result}
+uses following structure:
+
+\begin{lstlisting}
+struct virtio_admin_cmd_legacy_dev_reg_rd_result {
+        u8 region_data[];
+};
+\end{lstlisting}
+
+\paragraph{Legacy Driver Notification Region Query}\label{par:Basic Facilities of a Virtio Device / Device groups / Group administration commands / Legacy Interface / Legacy Driver Notifications Region Query}
+
+Even though the driver notifications can be communicated through the
+administration command, if the group owner device or group member device
+supports such notifications using a memory-mapped operation or I/O operation,
+they are sent to the device by accessing this notification region using memory
+or I/O operation.
+
+A group owner device optionally support querying driver notifications region
+using VIRTIO_ADMIN_CMD_LEGACY_NOTIFY_QUERY command.
+
+The driver sets command \field{opcode} to VIRTIO_ADMIN_CMD_LEGACY_NOTIFY_QUERY.
+This command does not have any command specific data.
+
+When command completes successfully, \field{command_specific_result}
+uses following structure:
+
+\begin{lstlisting}
+struct virtio_admin_cmd_legacy_notify_query_entry {
+        u8 region_data[16];
+};
+
+struct virtio_admin_cmd_legacy_notify_query_result {
+	struct virtio_virtio_admin_cmd_legacy_notify_query_entry entries[];
+};
+\end{lstlisting}
+
+The driver should pick the suitable entry when multiple entries are supplied
+by the device.
+
+Refer to the specific transport section for the definition of the
+\field{region_data}.
+
+\devicenormative{\paragraph}{Legacy Interface}{Basic Facilities of a Virtio Device / Device groups / Group administration commands / Legacy Interface}
+
+If the group owner device supports legacy region access for its group member
+devices, the device MUST set all corresponding bits for commands
+VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_WRITE,
+VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_READ,
+VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_WRITE and VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_READ in
+the command result of VIRTIO_ADMIN_CMD_LIST_QUERY in
+\field{device_admin_cmd_opcodes}.
+
+The device MUST encode and decode legacy device specific registers using
+little-endian format.
+
+The device MUST fail VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_WRITE and
+VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_READ commands for the invalid offset
+which is outside the legacy common configuration region's address range.
+
+The device MUST fail VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_WRITE,
+VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_READ commands for the invalid offset
+which is outside the legacy device specific region's address range.
+
+The device SHOULD support VIRTIO_ADMIN_CMD_LEGACY_NOTIFY_QUERY command for
+driver notifications. If the group owner device supports driver
+notifications region for its group member devices, the device MUST set
+VIRTIO_ADMIN_CMD_LEGACY_NOTIFY_QUERY in the command result of
+VIRTIO_ADMIN_CMD_LIST_QUERY in \field{device_admin_cmd_opcodes}.
+
+When the driver accesses the legacy region of the member device using
+VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_WRITE,
+VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_READ,
+VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_WRITE, VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_READ
+commands, device MUST function as if they are accessed by the legacy interface
+defined by the transport of the member device.
+
+\drivernormative{\paragraph}{Legacy Interface}{Basic Facilities of a Virtio Device / Device groups / Group administration commands / Legacy Interface}
+
+The driver MUST encode and decode legacy device specific registers using
+little-endian format.
+
+The driver SHOULD send VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_WRITE and
+VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_READ commands with a valid offset which
+is in the legacy common configuration region address range.
+
+The driver SHOULD send commands VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_WRITE and
+VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_READ with a valid offset which is in the legacy
+device specific configuration region address range.
+
+The group member driver SHOULD use the notification region supplied by the group
+owner device.
admin.tex +13 -1
index fd3b97d..0de26a9 100644
@@ -117,7 +117,17 @@ \subsection{Group administration commands}\label{sec:Basic Facilities of a Virti
 \hline
 0x0001 & VIRTIO_ADMIN_CMD_LIST_USE & Provides to device list of commands used for this group type \\
 \hline
-0x0002 - 0x7FFF & - & Commands using \field{struct virtio_admin_cmd}    \\
+0x0002 & VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_WRITE & Write legacy common configuration region of a member device \\
+\hline
+0x0003 & VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_READ & Read legacy common configuration region of a member device \\
+\hline
+0x0004 & VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_WRITE & Write legacy device configuration region of a member device \\
+\hline
+0x0005 & VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_READ & Read legacy device configuration region of a member device \\
+\hline
+0x0006 & VIRTIO_ADMIN_CMD_LEGACY_DEV_NOTIFY_QUERY & Query notification region for a member device \\
+\hline
+0x0007 - 0x7FFF & - & Commands using \field{struct virtio_admin_cmd}    \\
 \hline
 0x8000 - 0xFFFF & - & Reserved for future commands (possibly using a different structure)    \\
 \hline
@@ -286,6 +296,8 @@ \subsection{Group administration commands}\label{sec:Basic Facilities of a Virti
 supporting multiple group types, the list of supported commands
 might differ between different group types.
 
+\input{admin-cmds-legacy-interface.tex}
+
 \devicenormative{\subsubsection}{Group administration commands}{Basic Facilities of a Virtio Device / Device groups / Group administration commands}
 
 The device MUST validate \field{opcode}, \field{group_type} and
conformance.tex +2 -0
index 01ccd69..dc00e84 100644
@@ -260,6 +260,8 @@ \section{Conformance Targets}\label{sec:Conformance / Conformance Targets}
 \item Section \ref{sec:Basic Facilities of a Virtio Device / Virtqueues / Legacy Interfaces: A Note on Virtqueue Layout}
 \item Section \ref{sec:Basic Facilities of a Virtio Device / Virtqueues / Legacy Interfaces: A Note on Virtqueue Endianness}
 \item Section \ref{sec:Basic Facilities of a Virtio Device / Virtqueues / Message Framing / Legacy Interface: Message Framing}
+\item Section \ref{devicenormative:Basic Facilities of a Virtio Device / Device groups / Group administration commands / Legacy Interface}
+\item Section \ref{drivernormative:Basic Facilities of a Virtio Device / Device groups / Group administration commands / Legacy Interface}
 \item Section \ref{sec:General Initialization And Device Operation / Device Initialization / Legacy Interface: Device Initialization}
 \item Section \ref{sec:Virtio Transport Options / Virtio Over PCI Bus / PCI Device Discovery / Legacy Interfaces: A Note on PCI Device Discovery}
 \item Section \ref{sec:Virtio Transport Options / Virtio Over PCI Bus / PCI Device Layout / Legacy Interfaces: A Note on PCI Device Layout}
Signature · 1 line
2.26.2

---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]

#5 lore raw

[virtio-comment] RE: [PATCH v8 3/4] admin: Add group member legacy register access commands

Quoted 10 lines

From: Michael S. Tsirkin <[email protected]>
Sent: Tuesday, July 4, 2023 6:01 PM

In some systems, there's need to support utilizing legacy drivers with devices that do not directly support the legacy interface.
In such scenarios, an owner device of a group can provide the legacy interface functionality for group members.
The driver of an owner device can then access the legacy interface of a member device on behalf of the legacy member device driver.

In the last line, I will change from 'legacy member device driver' to just 'member device driver'.

I will fix rest of the comments including having pad bytes after offset and have similar changes in rest of the places.

#6 lore raw

[virtio-comment] Re: [PATCH v8 3/4] admin: Add group member legacy register access commands

Quoted 11 lines · Parav Pandit
Quoted 10 lines

From: Michael S. Tsirkin <[email protected]>
Sent: Tuesday, July 4, 2023 6:01 PM

In some systems, there's need to support utilizing legacy drivers with devices that do not directly support the legacy interface.
In such scenarios, an owner device of a group can provide the legacy interface functionality for group members.
The driver of an owner device can then access the legacy interface of a member device on behalf of the legacy member device driver.

In the last line, I will change from 'legacy member device driver' to just 'member device driver'.

I think it's important to stress legacy since normal driver that follows the spec does not access legacy interface at all.

Quoted 1 line

I will fix rest of the comments including having pad bytes after offset and have similar changes in rest of the places.

---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]

#7 lore raw

[virtio-comment] RE: [PATCH v8 3/4] admin: Add group member legacy register access commands

Quoted 23 lines

From: Michael S. Tsirkin <[email protected]>
Sent: Tuesday, July 4, 2023 6:17 PM
To: Parav Pandit <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; Yishai Hadas <[email protected]>; Maor Gottlieb <[email protected]>; Shahaf Shuler <[email protected]>
Subject: Re: [PATCH v8 3/4] admin: Add group member legacy register access commands

Quoted 10 lines · Parav Pandit
Quoted 10 lines

From: Michael S. Tsirkin <[email protected]>
Sent: Tuesday, July 4, 2023 6:01 PM

In some systems, there's need to support utilizing legacy drivers with devices that do not directly support the legacy interface. In such scenarios, an owner device of a group can provide the legacy interface functionality for group members.
The driver of an owner device can then access the legacy interface of a member device on behalf of the legacy member device driver.

Quoted 6 lines
Quoted 1 line

In the last line, I will change from 'legacy member device driver' to just

'member device driver'.

I think it's important to stress legacy since normal driver that follows the spec does not access legacy interface at all.

Alright.
Will keep legacy.

Quoted 3 lines
Quoted 2 lines

I will fix rest of the comments including having pad bytes after offset and have

similar changes in rest of the places.

This publicly archived list offers a means to provide input to the OASIS Virtual I/O Device (VIRTIO) TC.

In order to verify user consent to the Feedback License terms and to minimize spam in the list archive, subscription is required before posting.

Subscribe: [email protected]
Unsubscribe: [email protected]
List help: [email protected]
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/

#8 lore raw

[virtio-comment] RE: [PATCH v8 3/4] admin: Add group member legacy register access commands

In reply to Michael S. Tsirkin
Quoted 3 lines

From: Michael S. Tsirkin <[email protected]>
Sent: Tuesday, July 4, 2023 6:01 PM

[..]

Quoted 2 lines

Got up to this point. Can you try changing the rest to match?

Changed and match for rest in v9.
Please continue review rest of in v9.

#9 lore raw

PATCH v8 4/4 transport-pci: Introduce group legacy group member config region access

In reply to Parav Pandit

This patch links how in a PCI transport a group owner can access group member (PCI VFs) legacy registers using a legacy registers access commands using administration virtqueue infrastructure.

Additionally it extend the PCI notification capability through which a PCI VF device indicates to the driver which PCI BAR region to be used for driver notifications.

---
changelog:
v7->v8:
- addressed comments from Michael
- made bar offset 64-bit
- prefix legacy specific structure with _legacy
- moved generic normative from pci to generic section
- added link to virtio pci capabilities when referring to bar 0
- remove 'should' from generic description
v6->v7:
- addressed comments from Michael
- removed driver normative about I/O BAR emulation as it does not make much sense for the spec
- removed references to administration virtqueue
- rewrote driver legacy region access without guest and hypervisor wording
- added normative for notification region
- added normative for PCI IDs for device which support legacy commands v5->v6:
- aligned pci capability to 4B as required by PCI spec
- added text for the PCI capability for the group member device v4->v5:
- split pci transport and generic command section to new patch
- removed multiple references to the VF
- written the description of the command as generic with member and group device terminology
- reflected many section names to remove VF
v3->v4:
- moved noted to the conformance section details in next patch
- removed queue notify address query AQ command on Michael's suggestion, though it is fine. Instead replaced with extending virtio_pci_notify_cap to indicate that legacy queue notifications can be done on the notification location.
- fixed spelling errors.
- replaced administrative virtqueue to administration virtqueue
- added queue notification capability register to indicate legacy q notification supported
v2->v3:
- adddressed Jason and Michael's comment to split single register access command to common config and device specific commands.
- dropped the suggetion to introduce enable/disable command as admin command cap bit already covers it.
v1->v2:
- addressed comments from Michael
- added theory of operation
- grammar corrections
- removed group fields description from individual commands as it is already present in generic section
- added endianness normative for legacy device registers region
- renamed the file to drop vf and add legacy prefix

- added overview in commit log
- renamed subsection to reflect command

---
 admin-cmds-legacy-interface.tex |  4 ++--
 conformance.tex                 |  1 +
 transport-pci-legacy-regs.tex   | 41 +++++++++++++++++++++++++++++++++
 transport-pci.tex               |  2 ++
 4 files changed, 46 insertions(+), 2 deletions(-)
 create mode 100644 transport-pci-legacy-regs.tex
admin-cmds-legacy-interface.tex +2 -2
index 8036a0b..f5d7d08 100644
@@ -149,11 +149,11 @@ \subsubsection{Legacy Interfaces}\label{sec:Basic Facilities of a Virtio Device
 };
 \end{lstlisting}
 
-The driver should pick the suitable entry when multiple entries are supplied
+The driver picks the suitable entry when multiple entries are supplied
 by the device.
 
 Refer to the specific transport section for the definition of the
-\field{region_data}.
+\field{region_data}. For PCI transport refer to section \ref{sec:Virtio Transport Options / Virtio Over PCI Bus / Legacy Interface: Group Member Device Configuration Region Access}.
 
 \devicenormative{\paragraph}{Legacy Interface}{Basic Facilities of a Virtio Device / Device groups / Group administration commands / Legacy Interface}
 
conformance.tex +1 -0
index dc00e84..b3f2c92 100644
@@ -267,6 +267,7 @@ \section{Conformance Targets}\label{sec:Conformance / Conformance Targets}
 \item Section \ref{sec:Virtio Transport Options / Virtio Over PCI Bus / PCI Device Layout / Legacy Interfaces: A Note on PCI Device Layout}
 \item Section \ref{sec:Virtio Transport Options / Virtio Over PCI Bus / PCI-specific Initialization And Device Operation / Device Initialization / Virtio Device Configuration Layout Detection / Legacy Interface: A Note on Device Layout Detection}
 \item Section \ref{sec:Virtio Transport Options / Virtio Over PCI Bus / PCI-specific Initialization And Device Operation / Device Initialization / Virtqueue Configuration / Legacy Interface: A Note on Virtqueue Configuration}
+\item Section \ref{devicenormative:Virtio Transport Options / Virtio Over PCI Bus / Legacy Interface: Group Member Device Configuration Region Access}
 \item Section \ref{sec:Virtio Transport Options / Virtio Over MMIO / Legacy interface}
 \item Section \ref{sec:Virtio Transport Options / Virtio over channel I/O / Device Initialization / Setting the Virtio Revision / Legacy Interfaces: A Note on Setting the Virtio Revision}
 \item Section \ref{sec:Virtio Transport Options / Virtio over channel I/O / Device Initialization / Configuring a Virtqueue / Legacy Interface: A Note on Configuring a Virtqueue}
transport-pci-legacy-regs.tex new file +41 -0

41 lines not on this page · raw message

transport-pci.tex +2 -0
index a5c6719..72c78f6 100644
@@ -1212,3 +1212,5 @@ \subsubsection{Driver Handling Interrupts}\label{sec:Virtio Transport Options /
         re-examine the configuration space to see what changed.
     \end{itemize}
 \end{itemize}
+
+\input{transport-pci-legacy-regs.tex}
Signature · 18 lines
2.26.2


This publicly archived list offers a means to provide input to the
OASIS Virtual I/O Device (VIRTIO) TC.

In order to verify user consent to the Feedback License terms and
to minimize spam in the list archive, subscription is required
before posting.

Subscribe: [email protected]
Unsubscribe: [email protected]
List help: [email protected]
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/
#10 lore raw
In reply to Parav Pandit

Hi Michael,

Quoted 19 lines

From: Parav Pandit <[email protected]>
Sent: Friday, June 30, 2023 12:20 AM

This short series introduces legacy registers access commands for the owner group member access the legacy registers of the member VFs.
This short series introduces legacy region access commands by the group owner device for its member devices.
Currently it is applicable to the PCI PF and VF devices. If in future any SIOV devices to support legacy registers, they can be easily supported using same commands by using the group member identifiers of the future SIOV devices.

More details as overview, motivation, use case are further described below.

Patch summary:
--------------
patch-1 split rows of admin opcode tables by a line patch-2 fix section numbering
patch-3 add generic legacy region access commands patch-4 add pci specific definition

[..]

Quoted 18 lines

---
changelog:
v7->v8:
- remove empty line at the end of file
- removed white space at the end
- addressed comments from Michael add link to pci
- renamed region to region_data
- made region_data width to be 16 bytes to cover for 8 bytes offset
- moved generic notification region related normative from pci to generic section
- made bar offset 64-bit
- prefix legacy specific structure with _legacy
- moved generic normative from pci to generic section
- added link to virtio pci capabilities when referring to bar 0
- remove 'should' from generic description

Do you have any further comments on 3rd and 4th patch? I fixed your comments of v7, and some more were fixed.

#11 lore raw
Quoted 42 lines · Parav Pandit

Hi Michael,

Quoted 19 lines

From: Parav Pandit <[email protected]>
Sent: Friday, June 30, 2023 12:20 AM

This short series introduces legacy registers access commands for the owner group member access the legacy registers of the member VFs.
This short series introduces legacy region access commands by the group owner device for its member devices.
Currently it is applicable to the PCI PF and VF devices. If in future any SIOV devices to support legacy registers, they can be easily supported using same commands by using the group member identifiers of the future SIOV devices.

More details as overview, motivation, use case are further described below.

Patch summary:
--------------
patch-1 split rows of admin opcode tables by a line patch-2 fix section numbering
patch-3 add generic legacy region access commands patch-4 add pci specific definition

[..]

Quoted 18 lines

---
changelog:
v7->v8:
- remove empty line at the end of file
- removed white space at the end
- addressed comments from Michael add link to pci
- renamed region to region_data
- made region_data width to be 16 bytes to cover for 8 bytes offset
- moved generic notification region related normative from pci to generic section
- made bar offset 64-bit
- prefix legacy specific structure with _legacy
- moved generic normative from pci to generic section
- added link to virtio pci capabilities when referring to bar 0
- remove 'should' from generic description

Quoted 2 lines

Do you have any further comments on 3rd and 4th patch? I fixed your comments of v7, and some more were fixed.

Hope to send review tonight, max tomorrow.

This publicly archived list offers a means to provide input to the OASIS Virtual I/O Device (VIRTIO) TC.

In order to verify user consent to the Feedback License terms and to minimize spam in the list archive, subscription is required before posting.

Subscribe: [email protected]
Unsubscribe: [email protected]
List help: [email protected]
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/

#12 lore raw
Quoted 8 lines

From: Michael S. Tsirkin <[email protected]>
Sent: Tuesday, July 4, 2023 11:41 AM

Quoted 2 lines

Do you have any further comments on 3rd and 4th patch? I fixed your comments of v7, and some more were fixed.

Hope to send review tonight, max tomorrow.

Ok. thanks a lot.

This publicly archived list offers a means to provide input to the OASIS Virtual I/O Device (VIRTIO) TC.

In order to verify user consent to the Feedback License terms and to minimize spam in the list archive, subscription is required before posting.

Subscribe: [email protected]
Unsubscribe: [email protected]
List help: [email protected]
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/