Skip to contentSkip to conversation

selftests/nolibc: improve test report support

PATCH In review Zhangjin Wu 2 participants 6 messages Jun 19, 2023 – Jul 3, 2023

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v2 cover selftests/nolibc: improve test report support

Hi, Willy

Here is the v2 of our old patchset about test report [1].

The trailing '\r' fixup has been merged, so, here only resend the left parts with an additional patch to restore the failed tests print.

This patchset is rebased on the dev.2023.06.14a branch of linux-rcu [2].

Tests have passed for 'x86 run':

138 test(s) passed, 0 skipped, 0 failed.
See all results in /labs/linux-lab/src/linux-stable/tools/testing/selftests/nolibc/run.out

Also did 'run-user' for x86, mips and arm64.

Changes from v1 -> v2:

1. selftests/nolibc: add a standalone test report macro

As Willy pointed out, the old method with additional test-report target not work in 'make -j'.

A new macro is added to share the same report logic among the run-user, run and rerun targets, the path to test log file is

2. selftests/nolibc: always print the path to test log file

Always print the path to test log file, but move it to a new line to avoid annoying people when the test pass without any failures.

3. selftests/nolibc: restore the failed tests print

Restore printing of the failed tests to avoid manually opening the test log file when there are really failues.

Best regards,
Zhangjin
---
[1]: https://lore.kernel.org/lkml/[email protected]/
[2]: https://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git/

Zhangjin Wu (3):
selftests/nolibc: add a standalone test report macro selftests/nolibc: always print the path to test log file selftests/nolibc: restore the failed tests print

 tools/testing/selftests/nolibc/Makefile | 19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)
Signature · 1 line
2.25.1
#1 lore raw

PATCH v2 1/3 selftests/nolibc: add a standalone test report macro

The run-user, run and rerun targets use the same test report script, let's add a standalone test report macro for them.

This shrinks code lines and simplify the future maintainability.

---
 tools/testing/selftests/nolibc/Makefile | 19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)
tools/testing/selftests/nolibc/Makefile +7 -12
index 1b7b3c82f8ad..262a9f21d1b4 100644
@@ -84,6 +84,10 @@ CFLAGS  ?= -Os -fno-ident -fno-asynchronous-unwind-tables -std=c89 \
 		$(CFLAGS_$(ARCH)) $(CFLAGS_STACKPROTECTOR)
 LDFLAGS := -s
 
+REPORT  ?= awk '/\[OK\][\r]*$$/{p++} /\[FAIL\][\r]*$$/{f++} /\[SKIPPED\][\r]*$$/{s++} \
+		END{ printf("%d test(s) passed, %d skipped, %d failed.", p, s, f); \
+		if (s+f > 0) printf(" See all results in %s\n", ARGV[1]); else print; }'
+
 help:
 	@echo "Supported targets under selftests/nolibc:"
 	@echo "  all          call the \"run\" target below"
@@ -131,10 +135,7 @@ libc-test: nolibc-test.c
 # qemu user-land test
 run-user: nolibc-test
 	$(Q)qemu-$(QEMU_ARCH) ./nolibc-test > "$(CURDIR)/run.out" || :
-	$(Q)awk '/\[OK\][\r]*$$/{p++} /\[FAIL\][\r]*$$/{f++} /\[SKIPPED\][\r]*$$/{s++} \
-	         END{ printf("%d test(s) passed, %d skipped, %d failed.", p, s, f); \
-	         if (s+f > 0) printf(" See all results in %s\n", ARGV[1]); else print; }' \
-	         $(CURDIR)/run.out
+	$(Q)$(REPORT) $(CURDIR)/run.out
 
 initramfs: nolibc-test
 	$(QUIET_MKDIR)mkdir -p initramfs
@@ -150,18 +151,12 @@ kernel: initramfs
 # run the tests after building the kernel
 run: kernel
 	$(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(srctree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out"
-	$(Q)awk '/\[OK\][\r]*$$/{p++} /\[FAIL\][\r]*$$/{f++} /\[SKIPPED\][\r]*$$/{s++} \
-	         END{ printf("%d test(s) passed, %d skipped, %d failed.", p, s, f); \
-	         if (s+f > 0) printf(" See all results in %s\n", ARGV[1]); else print; }' \
-	         $(CURDIR)/run.out
+	$(Q)$(REPORT) $(CURDIR)/run.out
 
 # re-run the tests from an existing kernel
 rerun:
 	$(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(srctree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out"
-	$(Q)awk '/\[OK\][\r]*$$/{p++} /\[FAIL\][\r]*$$/{f++} /\[SKIPPED\][\r]*$$/{s++} \
-	         END{ printf("%d test(s) passed, %d skipped, %d failed.", p, s, f); \
-	         if (s+f > 0) printf(" See all results in %s\n", ARGV[1]); else print; }' \
-	         $(CURDIR)/run.out
+	$(Q)$(REPORT) $(CURDIR)/run.out
 
 clean:
 	$(call QUIET_CLEAN, sysroot)
Signature · 1 line
2.25.1
#2 lore raw

PATCH v2 2/3 selftests/nolibc: always print the path to test log file

In reply to Zhangjin Wu

Even when there is no failure, developers may be still interested in the test log file, especially, string alignment, duplicated print, kernel message and so forth, so, always print the path to test log file.

A new line is added for such a print to avoid annoying people who don't care about it when the test pass completely.

---
 tools/testing/selftests/nolibc/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
tools/testing/selftests/nolibc/Makefile +2 -2
index 262a9f21d1b4..2a0c3f4fa204 100644
@@ -85,8 +85,8 @@ CFLAGS  ?= -Os -fno-ident -fno-asynchronous-unwind-tables -std=c89 \
 LDFLAGS := -s
 
 REPORT  ?= awk '/\[OK\][\r]*$$/{p++} /\[FAIL\][\r]*$$/{f++} /\[SKIPPED\][\r]*$$/{s++} \
-		END{ printf("%d test(s) passed, %d skipped, %d failed.", p, s, f); \
-		if (s+f > 0) printf(" See all results in %s\n", ARGV[1]); else print; }'
+		END{ printf("%d test(s) passed, %d skipped, %d failed.\n", p, s, f); \
+		printf("See all results in %s\n", ARGV[1]); }'
 
 help:
 	@echo "Supported targets under selftests/nolibc:"
Signature · 1 line
2.25.1
#3 lore raw

PATCH v2 3/3 selftests/nolibc: restore the failed tests print

In reply to Zhangjin Wu

The commit fa0df56a804b ("selftests/nolibc: also count skipped and failed tests in output") added counting for the skipped and failed tests, but also removed the 'FAIL' results print, let's restore it for it really allow users to learn the failed details without opening the log file.

---
 tools/testing/selftests/nolibc/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/nolibc/Makefile +1 -1
index 2a0c3f4fa204..000621f21adc 100644
@@ -84,7 +84,7 @@ CFLAGS  ?= -Os -fno-ident -fno-asynchronous-unwind-tables -std=c89 \
 		$(CFLAGS_$(ARCH)) $(CFLAGS_STACKPROTECTOR)
 LDFLAGS := -s
 
-REPORT  ?= awk '/\[OK\][\r]*$$/{p++} /\[FAIL\][\r]*$$/{f++} /\[SKIPPED\][\r]*$$/{s++} \
+REPORT  ?= awk '/\[OK\][\r]*$$/{p++} /\[FAIL\][\r]*$$/{f++;print} /\[SKIPPED\][\r]*$$/{s++} \
 		END{ printf("%d test(s) passed, %d skipped, %d failed.\n", p, s, f); \
 		printf("See all results in %s\n", ARGV[1]); }'
 
Signature · 1 line
2.25.1
maintainer
#4 lore raw
In reply to Zhangjin Wu

Hi Zhangjin,

Quoted 13 lines · Zhangjin Wu

Hi, Willy

Here is the v2 of our old patchset about test report [1].

The trailing '\r' fixup has been merged, so, here only resend the left parts with an additional patch to restore the failed tests print.

This patchset is rebased on the dev.2023.06.14a branch of linux-rcu [2].

Tests have passed for 'x86 run':

138 test(s) passed, 0 skipped, 0 failed.
See all results in /labs/linux-lab/src/linux-stable/tools/testing/selftests/nolibc/run.out

(...)

Quoted 4 lines

2. selftests/nolibc: always print the path to test log file

Always print the path to test log file, but move it to a new line to avoid annoying people when the test pass without any failures.

I'm still really missing the (s+f > 0) test I added which was a time saver for me, because I could trivially check in the output reports which ones were totally OK and which ones required attention. Sure I could also start to grep for "passed," | grep -v " 0 skipped, 0 failed" but that's quite a pain, really.

I'm going to merge your series anyway otherwise we'll continue to bikeshed for many weeks and I know how annoying it is to keep unmerged series. But I would like that we find a solution that satisfies everyone.

Maybe one possibility would be to add a "status" at the end of the line that emits "success", "warning", "failure" depending on the highest level reached like this:

138 test(s) passed, 0 skipped, 0 failed => status: success 136 test(s) passed, 2 skipped, 0 failed => status: warning 136 test(s) passed, 1 skipped, 1 failed => status: failure

This way it's easy to grep -v "status: success" or grep "status: failure" to instantly get the corresponding details and also grep for them from multiple files.

Thanks!
Willy

#5 lore raw
Quoted 36 lines

Hi Zhangjin,

Quoted 13 lines · Zhangjin Wu

Hi, Willy

Here is the v2 of our old patchset about test report [1].

The trailing '\r' fixup has been merged, so, here only resend the left parts with an additional patch to restore the failed tests print.

This patchset is rebased on the dev.2023.06.14a branch of linux-rcu [2].

Tests have passed for 'x86 run':

138 test(s) passed, 0 skipped, 0 failed.
See all results in /labs/linux-lab/src/linux-stable/tools/testing/selftests/nolibc/run.out

(...)

Quoted 4 lines

2. selftests/nolibc: always print the path to test log file

Always print the path to test log file, but move it to a new line to avoid annoying people when the test pass without any failures.

I'm still really missing the (s+f > 0) test I added which was a time saver for me, because I could trivially check in the output reports which ones were totally OK and which ones required attention. Sure I could also start to grep for "passed," | grep -v " 0 skipped, 0 failed" but that's quite a pain, really.

I'm going to merge your series anyway otherwise we'll continue to bikeshed for many weeks and I know how annoying it is to keep unmerged series. But I would like that we find a solution that satisfies everyone.

Maybe one possibility would be to add a "status" at the end of the line that emits "success", "warning", "failure" depending on the highest level reached like this:

Quoted 7 lines

138 test(s) passed, 0 skipped, 0 failed => status: success 136 test(s) passed, 2 skipped, 0 failed => status: warning 136 test(s) passed, 1 skipped, 1 failed => status: failure

This way it's easy to grep -v "status: success" or grep "status: failure" to instantly get the corresponding details and also grep for them from multiple files.

Ok, it will be a further step, based on your new awk script, it is not that hard.

This should work:

    REPORT  ?= awk '/\[OK\][\r]*$$/{p++} /\[FAIL\][\r]*$$/{f++;print} /\[SKIPPED\][\r]*$$/{s++} \
                END{ printf("\n%d test(s): %d passed, %d skipped, %d failed => status: ", p+s+f, p, s, f); \
                if (f) printf("failure\n"); else if (s) printf("warning\n"); else printf("success\n");; \
                printf("\nSee all results in %s\n", ARGV[1]); }'

It reports something like this:

...
Total number of errors: 0
Exiting with status 0

143 test(s): 140 passed, 3 skipped, 0 failed => status: warning

See all results in /labs/linux-lab/src/linux-stable/tools/testing/selftests/nolibc/build/x86/run.out

Two newlines are added around the summary line, so, it is not crowded as before. If this is ok, will send a new patch on your new branch.

Thanks very much.

Best regards,
Zhangjin

Quoted 3 lines

Thanks!
Willy