Fix PSIHB interrupts init PQ state
v2 cover Fix PSIHB interrupts init PQ state
On P9 and 10, the real hardware defines the PQ state of the PSIHB interrupts to be 0b00. Qemu defaults to 0b01.
It doesn't matter to skiboot, which doesn't rely on it and explicitly masks the interrupts during intialization. But this patch fixes it, just in case some other hypervisor checks it.
Changelog:
v2: rename property/struct member
rebase to Daniel's ppc-next branch
Frederic Barrat (2):
pnv/xive: Add property on xive sources to define PQ state on reset pnv/psi: Initialize the PSIHB interrupts to match hardware
hw/intc/xive.c | 8 ++++++-- hw/ppc/pnv_psi.c | 2 ++ include/hw/ppc/xive.h | 1 + 3 files changed, 9 insertions(+), 2 deletions(-)
Signature · 1 line
2.41.0
PATCH v2 1/2 pnv/xive: Add property on xive sources to define PQ state on reset
The PQ state of a xive interrupt is always initialized to Q=1, which means the interrupt is disabled. Since a xive source can be embedded in many objects, this patch adds a property to allow that behavior to be refined if needed.
--- hw/intc/xive.c | 8 ++++++-- include/hw/ppc/xive.h | 1 + 2 files changed, 7 insertions(+), 2 deletions(-)
hw/intc/xive.c +6 -2
@@ -1232,8 +1232,7 @@ static void xive_source_reset(void *dev)/* Do not clear the LSI bitmap */ -/* PQs are initialized to 0b01 (Q=1) which corresponds to "ints off" */ -memset (xsrc->status,XIVE_ESB_OFF , xsrc->nr_irqs); +memset (xsrc->status, xsrc->reset_pq, xsrc->nr_irqs); }static void xive_source_realize (DeviceState *dev,Error **errp)
@@ -1287,6 +1286,11 @@ static Property xive_source_properties[] = {DEFINE_PROP_UINT64 ("flags" , XiveSource, esb_flags,0 ),DEFINE_PROP_UINT32 ("nr-irqs" , XiveSource, nr_irqs,0 ),DEFINE_PROP_UINT32 ("shift" , XiveSource, esb_shift,XIVE_ESB_64K_2PAGE ), +/* +* By default, PQs are initialized to 0b01 (Q=1) which corresponds +* to "ints off" +*/ +DEFINE_PROP_UINT8 ("reset-pq" , XiveSource, reset_pq,XIVE_ESB_OFF ),DEFINE_PROP_LINK ("xive" , XiveSource, xive,TYPE_XIVE_NOTIFIER , XiveNotifier *), DEFINE_PROP_END_OF_LIST(),
include/hw/ppc/xive.h +1 -0
@@ -187,6 +187,7 @@ struct XiveSource {/* PQ bits and LSI assertion bit */ uint8_t *status; +uint8_t reset_pq;/* PQ state on reset */ /* ESB memory region */ uint64_t esb_flags;
Signature · 1 line
2.41.0
Re: [PATCH v2 1/2] pnv/xive: Add property on xive sources to define PQ state on reset
Quoted 6 lines · Frederic Barrat
The PQ state of a xive interrupt is always initialized to Q=1, which means the interrupt is disabled. Since a xive source can be embedded in many objects, this patch adds a property to allow that behavior to be refined if needed.
Signed-off-by Frederic Barrat <[email protected]>
Thanks,
C.
Quoted 43 lines
--- hw/intc/xive.c | 8 ++++++-- include/hw/ppc/xive.h | 1 + 2 files changed, 7 insertions(+), 2 deletions(-)hw/intc/xive.c +6
-2@@ -1232,8 +1232,7 @@ static void xive_source_reset(void *dev)/* Do not clear the LSI bitmap */ -/* PQs are initialized to 0b01 (Q=1) which corresponds to "ints off" */ -memset (xsrc->status,XIVE_ESB_OFF , xsrc->nr_irqs); +memset (xsrc->status, xsrc->reset_pq, xsrc->nr_irqs); }static void xive_source_realize (DeviceState *dev,Error **errp)@@ -1287,6 +1286,11 @@ static Property xive_source_properties[] = {DEFINE_PROP_UINT64 ("flags" , XiveSource, esb_flags,0 ),DEFINE_PROP_UINT32 ("nr-irqs" , XiveSource, nr_irqs,0 ),DEFINE_PROP_UINT32 ("shift" , XiveSource, esb_shift,XIVE_ESB_64K_2PAGE ), +/* +* By default, PQs are initialized to 0b01 (Q=1) which corresponds +* to "ints off" +*/ +DEFINE_PROP_UINT8 ("reset-pq" , XiveSource, reset_pq,XIVE_ESB_OFF ),DEFINE_PROP_LINK ("xive" , XiveSource, xive,TYPE_XIVE_NOTIFIER , XiveNotifier *), DEFINE_PROP_END_OF_LIST(),include/hw/ppc/xive.h +1
-0@@ -187,6 +187,7 @@ struct XiveSource {/* PQ bits and LSI assertion bit */ uint8_t *status; +uint8_t reset_pq;/* PQ state on reset */ /* ESB memory region */ uint64_t esb_flags;
PATCH v2 2/2 pnv/psi: Initialize the PSIHB interrupts to match hardware
In reply to Frederic BarratOn the powernv9 and powernv10 machines, the PSIHB interrupts are currently initialized with a PQ state of 0b01, i.e. interrupts are disabled. However real hardware initializes them to 0b00 for the PSIHB. This patch updates it, in case an hypervisor is in the mood of checking it.
--- hw/ppc/pnv_psi.c | 2 ++ 1 file changed, 2 insertions(+)
hw/ppc/pnv_psi.c +2 -0
@@ -863,6 +863,8 @@ static void pnv_psi_power9_realize(DeviceState *dev, Error **errp)object_property_set_int (OBJECT (xsrc),"nr-irqs" ,PSIHB9_NUM_IRQS , &error_fatal);object_property_set_link (OBJECT (xsrc),"xive" ,OBJECT (psi), &error_abort); +object_property_set_int (OBJECT (xsrc),"reset-pq" ,XIVE_ESB_RESET , + &error_abort);if (!qdev_realize (DEVICE (xsrc),NULL , errp)) {return ; }
Signature · 1 line
2.41.0
Re: [PATCH v2 2/2] pnv/psi: Initialize the PSIHB interrupts to match hardware
Quoted 7 lines · Frederic Barrat
On the powernv9 and powernv10 machines, the PSIHB interrupts are currently initialized with a PQ state of 0b01, i.e. interrupts are disabled. However real hardware initializes them to 0b00 for the PSIHB. This patch updates it, in case an hypervisor is in the mood of checking it.
Signed-off-by Frederic Barrat <[email protected]>
Thanks,
C.
Quoted 17 lines
--- hw/ppc/pnv_psi.c | 2 ++ 1 file changed, 2 insertions(+)hw/ppc/pnv_psi.c +2
-0@@ -863,6 +863,8 @@ static void pnv_psi_power9_realize(DeviceState *dev, Error **errp)object_property_set_int (OBJECT (xsrc),"nr-irqs" ,PSIHB9_NUM_IRQS , &error_fatal);object_property_set_link (OBJECT (xsrc),"xive" ,OBJECT (psi), &error_abort); +object_property_set_int (OBJECT (xsrc),"reset-pq" ,XIVE_ESB_RESET , + &error_abort);if (!qdev_realize (DEVICE (xsrc),NULL , errp)) {return ; }
Quoted 3 lines · Frederic Barrat
Frederic Barrat (2):
pnv/xive: Add property on xive sources to define PQ state on reset pnv/psi: Initialize the PSIHB interrupts to match hardware
Daniel Henrique Barboza
AppliedQueued in gitlab.com/danielhb/qemu/tree/ppc-next. Thanks,
Daniel
Quoted 21 lines · Frederic Barrat
On P9 and 10, the real hardware defines the PQ state of the PSIHB interrupts to be 0b00. Qemu defaults to 0b01.
It doesn't matter to skiboot, which doesn't rely on it and explicitly masks the interrupts during intialization. But this patch fixes it, just in case some other hypervisor checks it.
Changelog:
v2: rename property/struct member
rebase to Daniel's ppc-next branchFrederic Barrat (2):
pnv/xive: Add property on xive sources to define PQ state on reset pnv/psi: Initialize the PSIHB interrupts to match hardwarehw/intc/xive.c | 8 ++++++-- hw/ppc/pnv_psi.c | 2 ++ include/hw/ppc/xive.h | 1 + 3 files changed, 9 insertions(+), 2 deletions(-)