Test the docs/config/q35-*.cfg config files
cover Test the docs/config/q35-*.cfg config files
With some tweaking (e.g. by creating temporary image files), we can check whether the docs/config/q35-*.cfg files can be loaded by QEMU successfully, so we can avoid that these files bitrot and avoid that our config file parser gets regressions.
Thomas Huth (3):
tests/qtest/readconfig-test: Allow testing for arbitrary memory sizes tests/qtest: Move mkimg() and have_qemu_img() from libqos to libqtest tests/qtest/readconfig: Test the docs/config/q35-*.cfg files
tests/qtest/libqos/libqos.h | 2 - tests/qtest/libqtest.h | 20 ++++ tests/qtest/libqos/libqos.c | 49 +------- tests/qtest/libqtest.c | 52 +++++++++ tests/qtest/readconfig-test.c | 204 +++++++++++++++++++++++++++++++++- 5 files changed, 273 insertions(+), 54 deletions(-)
Signature · 1 line
2.39.3
PATCH 1/3 tests/qtest/readconfig-test: Allow testing for arbitrary memory sizes
Make test_x86_memdev_resp() more flexible by allowing arbitrary memory sizes as parameter here.
--- tests/qtest/readconfig-test.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
tests/qtest/readconfig-test.c +4 -4
@@ -48,7 +48,7 @@ static QTestState *qtest_init_with_config(const char *cfgdata)return qts; } -static void test_x86_memdev_resp (QObject *res) +static void test_x86_memdev_resp (QObject *res,const char *mem_id,int size) {Visitor *v;g_autoptr (MemdevList) memdevs =NULL ;
@@ -63,8 +63,8 @@ static void test_x86_memdev_resp(QObject *res)g_assert (!memdevs->next); memdev = memdevs->value; - g_assert_cmpstr(memdev->id, ==, "ram"); - g_assert_cmpint(memdev->size, ==, 200 * MiB); + g_assert_cmpstr(memdev->id, ==, mem_id); + g_assert_cmpint(memdev->size, ==, size * MiB);visit_free (v); }
@@ -80,7 +80,7 @@ static void test_x86_memdev(void) qts =qtest_init_with_config (cfgdata);/* Test valid command */ resp =qtest_qmp (qts,"{ 'execute': 'query-memdev' }" ); -test_x86_memdev_resp (qdict_get (resp,"return" )); +test_x86_memdev_resp (qdict_get (resp,"return" ),"ram" ,200 );qobject_unref (resp);qtest_quit (qts);
Signature · 1 line
2.39.3
PATCH 2/3 tests/qtest: Move mkimg() and have_qemu_img() from libqos to libqtest
In reply to Thomas HuthThese two functions can be useful for other qtests beside the qos-test, too, so move them to libqtest instead.
--- tests/qtest/libqos/libqos.h | 2 -- tests/qtest/libqtest.h | 20 ++++++++++++++ tests/qtest/libqos/libqos.c | 49 +--------------------------------- tests/qtest/libqtest.c | 52 +++++++++++++++++++++++++++++++++++++ 4 files changed, 73 insertions(+), 50 deletions(-)
tests/qtest/libqos/libqos.h +0 -2
@@ -27,8 +27,6 @@ QOSState *qtest_boot(QOSOps *ops, const char *cmdline_fmt, ...)G_GNUC_PRINTF (2 ,3 );void qtest_common_shutdown (QOSState *qs);void qtest_shutdown (QOSState *qs); -bool have_qemu_img (void ); -void mkimg (const char *file,const char *fmt,unsigned size_mb);void mkqcow2 (const char *file,unsigned size_mb);void migrate (QOSState *from,QOSState *to,const char *uri);void prepare_blkdebug_script (const char *debug_fn,const char *event);
tests/qtest/libqtest.h +20 -0
@@ -994,4 +994,24 @@ bool qtest_qom_get_bool(QTestState *s, const char *path, const char *property);*/ pid_t qtest_pid (QTestState *s); +/** +* have_qemu_img: +* +* Returns: true if "qemu-img" is available. +*/ +bool have_qemu_img (void ); + +/** +* mkimg: +* @file: File name of the image that should be created +* @fmt: Format, e.g. "qcow2" or "raw" +* @size_mb: Size of the image in megabytes +* +* Create a disk image with qemu-img. Note that the QTEST_QEMU_IMG +* environment variable must point to the qemu-img file. +* +* Returns: true if the image has been created successfully. +*/ +bool mkimg (const char *file,const char *fmt,unsigned size_mb); +#endif
tests/qtest/libqos/libqos.c +1 -48
57 lines not on this page · raw message
tests/qtest/libqtest.c +52 -0
55 lines not on this page · raw message
Signature · 1 line
2.39.3
PATCH 3/3 tests/qtest/readconfig: Test the docs/config/q35-*.cfg files
In reply to Thomas HuthTest that we can successfully parse the docs/config/q35-emulated.cfg, docs/config/q35-virtio-graphical.cfg and docs/config/q35-virtio-serial.cfg config files (the "...-serial.cfg" file is a subset of the graphical config file, so we skip that in quick mode).
These config files use two hard-coded image names which we have to replace with unique temporary files to avoid race conditions in case the tests are run in parallel. So after creating the temporary image files, we also have to create a copy of the config file where we replaced the hard-coded image names.
If KVM is not available, we also have to disable the "accel" lines. Once everything is in place, we can start QEMU with the modified config file and check that everything is available in QEMU.
--- tests/qtest/readconfig-test.c | 196 ++++++++++++++++++++++++++++++++++ 1 file changed, 196 insertions(+)
tests/qtest/readconfig-test.c +196 -0
@@ -197,6 +197,189 @@ static void test_docs_config_ich9(void)qtest_quit (qts); } +#if defined(CONFIG_POSIX ) && defined(CONFIG_SLIRP ) + +static char *make_temp_img (const char *template,const char *format,int size) +{ +GError *error =NULL ; +char *temp_name; +int fd; + +/* Create a temporary image names */ + fd =g_file_open_tmp (template, &temp_name, &error); +if (fd ==-1 ) { +fprintf (stderr,"unable to create file: %s\n" , error->message); +g_error_free (error); +return NULL ; + } +close (fd); + +if (!mkimg (temp_name, format, size)) { +fprintf (stderr,"qemu-img failed to create %s\n" , temp_name); +g_free (temp_name); +return NULL ; + } + +return temp_name; +} + +struct device { +const char *name; +const char *type; +}; + +static void test_docs_q35 (const char *input_file,struct device *devices) +{ +QTestState *qts; +QDict *resp; +QObject *qobj; +int ret, i; + g_autofree char *cfg_file = NULL, *sedcmd = NULL; + g_autofree char *hd_file = NULL, *cd_file = NULL; + +/* Check that all the devices are available in the QEMU binary */ +for (i =0 ; devices[i].name; i++) { +if (!qtest_has_device (devices[i].type)) { +g_test_skip ("one of the required devices is not available" ); +return ; + } + } + + hd_file =make_temp_img ("qtest_disk_XXXXXX.qcow2" ,"qcow2" ,1 ); + cd_file =make_temp_img ("qtest_cdrom_XXXXXX.iso" ,"raw" ,1 ); +if (!hd_file || !cd_file) { +g_test_skip ("could not create disk images" ); + goto cleanup; + } + +/* Create a temporary config file where we replace the disk image names */ + ret =g_file_open_tmp ("q35-emulated-XXXXXX.cfg" , &cfg_file,NULL ); +if (ret ==-1 ) { +g_test_skip ("could not create temporary config file" ); + goto cleanup; + } +close (ret); + + sedcmd =g_strdup_printf ("sed -e 's,guest.qcow2,%s,' -e 's,install.iso,%s,'" +" %s %s > '%s'" , + hd_file, cd_file, + !qtest_has_accel ("kvm" ) ?"-e '/accel/d'" :"" , + input_file, cfg_file); + ret =system (sedcmd); +if (ret) { +g_test_skip ("could not modify temporary config file" ); + goto cleanup; + } + + qts =qtest_initf ("-machine none -nodefaults -readconfig %s" , cfg_file); + +/* Check memory size */ + resp =qtest_qmp (qts,"{ 'execute': 'query-memdev' }" ); +test_x86_memdev_resp (qdict_get (resp,"return" ),"pc.ram" ,1024 ); +qobject_unref (resp); + + resp =qtest_qmp (qts,"{ 'execute': 'qom-list'," +" 'arguments': {'path': '/machine/peripheral' }}" ); + qobj =qdict_get (resp,"return" ); + +/* Check that all the devices have been created */ +for (i =0 ; devices[i].name; i++) { +test_object_available (qobj, devices[i].name, devices[i].type); + } + +qobject_unref (resp); + +qtest_quit (qts); + +cleanup: +if (hd_file) { +unlink (hd_file); + } +if (cd_file) { +unlink (cd_file); + } +if (cfg_file) { +unlink (cfg_file); + } +} + +static void test_docs_q35_emulated (void ) +{ +struct device devices[] = { + {"ich9-pcie-port-1" ,"ioh3420" }, + {"ich9-pcie-port-2" ,"ioh3420" }, + {"ich9-pcie-port-3" ,"ioh3420" }, + {"ich9-pcie-port-4" ,"ioh3420" }, + {"ich9-pci-bridge" ,"i82801b11-bridge" }, + {"ich9-ehci-1" ,"ich9-usb-ehci1" }, + {"ich9-ehci-2" ,"ich9-usb-ehci2" }, + {"ich9-uhci-1" ,"ich9-usb-uhci1" }, + {"ich9-uhci-2" ,"ich9-usb-uhci2" }, + {"ich9-uhci-3" ,"ich9-usb-uhci3" }, + {"ich9-uhci-4" ,"ich9-usb-uhci4" }, + {"ich9-uhci-5" ,"ich9-usb-uhci5" }, + {"ich9-uhci-6" ,"ich9-usb-uhci6" }, + {"sata-disk" ,"ide-hd" }, + {"sata-optical-disk" ,"ide-cd" }, + {"net" ,"e1000" }, + {"video" ,"VGA" }, + {"ich9-hda-audio" ,"ich9-intel-hda" }, + {"ich9-hda-duplex" ,"hda-duplex" }, + {NULL ,NULL } + }; + +test_docs_q35 ("docs/config/q35-emulated.cfg" , devices); +} + +static void test_docs_q35_virtio_graphical (void ) +{ +struct device devices[] = { + {"pcie.1" ,"pcie-root-port" }, + {"pcie.2" ,"pcie-root-port" }, + {"pcie.3" ,"pcie-root-port" }, + {"pcie.4" ,"pcie-root-port" }, + {"pcie.5" ,"pcie-root-port" }, + {"pcie.6" ,"pcie-root-port" }, + {"pcie.7" ,"pcie-root-port" }, + {"pcie.8" ,"pcie-root-port" }, + {"scsi" ,"virtio-scsi-pci" }, + {"scsi-disk" ,"scsi-hd" }, + {"scsi-optical-disk" ,"scsi-cd" }, + {"net" ,"virtio-net-pci" }, + {"usb" ,"nec-usb-xhci" }, + {"tablet" ,"usb-tablet" }, + {"video" ,"qxl-vga" }, + {"sound" ,"ich9-intel-hda" }, + {"duplex" ,"hda-duplex" }, + {NULL ,NULL } + }; + +test_docs_q35 ("docs/config/q35-virtio-graphical.cfg" , devices); +} + +static void test_docs_q35_virtio_serial (void ) +{ +struct device devices[] = { + {"pcie.1" ,"pcie-root-port" }, + {"pcie.2" ,"pcie-root-port" }, + {"pcie.3" ,"pcie-root-port" }, + {"pcie.4" ,"pcie-root-port" }, + {"pcie.5" ,"pcie-root-port" }, + {"pcie.6" ,"pcie-root-port" }, + {"pcie.7" ,"pcie-root-port" }, + {"pcie.8" ,"pcie-root-port" }, + {"scsi" ,"virtio-scsi-pci" }, + {"scsi-disk" ,"scsi-hd" }, + {"scsi-optical-disk" ,"scsi-cd" }, + {"net" ,"virtio-net-pci" }, + {NULL ,NULL } + }; + +test_docs_q35 ("docs/config/q35-virtio-serial.cfg" , devices); +} + +#endif /* CONFIG_LINUX */ +int main (int argc,char *argv[]) {const char *arch;
@@ -211,6 +394,19 @@ int main(int argc, char *argv[]) qtest_has_device("ich9-usb-uhci1")) {qtest_add_func ("readconfig/x86/ich9-ehci-uhci" , test_docs_config_ich9); } +#if defined(CONFIG_POSIX ) && defined(CONFIG_SLIRP ) +qtest_add_func ("readconfig/x86/q35-emulated" , test_docs_q35_emulated); +qtest_add_func ("readconfig/x86/q35-virtio-graphical" , + test_docs_q35_virtio_graphical); +if (g_test_slow ()) { +/* +* q35-virtio-serial.cfg is a subset of q35-virtio-graphical.cfg, +* so we can skip the test in quick mode +*/ +qtest_add_func ("readconfig/x86/q35-virtio-serial" , + test_docs_q35_virtio_serial); + } +#endif }#if defined(CONFIG_SPICE ) && !defined(__FreeBSD__)qtest_add_func ("readconfig/spice" , test_spice);
Signature · 1 line
2.39.3