ARM: dts: imx: Fix eMMC boot on Data Modul i.MX8M Plus eDM SBC
PATCH 1/1 ARM: dts: imx: Fix eMMC boot on Data Modul i.MX8M Plus eDM SBC
In case the i.MX8M Plus starts from eMMC BOOT1/BOOT2 HW partitions, the flash.bin container is stored at offset 0 from the start, that means the fitImage itb is at offset 0x2c0 instead of 0x300 sectors from the start. Handle this difference in custom spl_mmc_get_uboot_raw_sector() .
---
Cc: Fabio Estevam <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Stefano Babic <[email protected]>
--- board/data_modul/imx8mp_edm_sbc/spl.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
board/data_modul/imx8mp_edm_sbc/spl.c +14 -0
@@ -107,6 +107,20 @@ void board_boot_order(u32 *spl_boot_list) spl_boot_list[4 ] =BOOT_DEVICE_NONE ; } +unsigned long spl_mmc_get_uboot_raw_sector (struct mmc *mmc,unsigned long sect) +{ +const u32 boot_dev =spl_boot_device (); +int part; + +if (boot_dev ==BOOT_DEVICE_MMC2 ) {/* eMMC */ + part =spl_mmc_emmc_boot_partition (mmc); +if (part ==1 || part ==2 )/* eMMC BOOT1/BOOT2 HW partitions */ +return sect -0x40 ; + } + +return sect; +} +static struct dram_timing_info *dram_timing_info[8 ] = { &dmo_imx8mp_sbc_dram_timing_32_32,/* 32 Gbit x32 */ NULL ,/* 32 Gbit x16 */
Signature · 1 line
2.40.1
Quoted 6 lines · Marek Vasut
In case the i.MX8M Plus starts from eMMC BOOT1/BOOT2 HW partitions, the flash.bin container is stored at offset 0 from the start, that means the fitImage itb is at offset
0x2c0instead of0x300sectors from the start. Handle this difference in customspl_mmc_get_uboot_raw_sector().Signed-off-by Marek Vasut <[email protected]>
Quoted 33 lines
---
Cc: Fabio Estevam <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Stefano Babic <[email protected]>--- board/data_modul/imx8mp_edm_sbc/spl.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)board/data_modul/imx8mp_edm_sbc/spl.c +14
-0@@ -107,6 +107,20 @@ void board_boot_order(u32 *spl_boot_list) spl_boot_list[4 ] =BOOT_DEVICE_NONE ; } +unsigned long spl_mmc_get_uboot_raw_sector (struct mmc *mmc,unsigned long sect) +{ +const u32 boot_dev =spl_boot_device (); +int part; + +if (boot_dev ==BOOT_DEVICE_MMC2 ) {/* eMMC */ + part =spl_mmc_emmc_boot_partition (mmc); +if (part ==1 || part ==2 )/* eMMC BOOT1/BOOT2 HW partitions */ +return sect -0x40 ; + } + +return sect; +} +static struct dram_timing_info *dram_timing_info[8 ] = { &dmo_imx8mp_sbc_dram_timing_32_32,/* 32 Gbit x32 */ NULL ,/* 32 Gbit x16 */
Jaehoon Chung
Reviewed-byQuoted 13 lines
-----Original Message-----
From: U-Boot <[email protected]> On Behalf Of Peng Fan
Sent: Thursday, July 6, 2023 5:01 PM
To: Marek Vasut <[email protected]>; [email protected]
Cc: [email protected]; Fabio Estevam <[email protected]>; Peng Fan <[email protected]>; Stefano Babic <[email protected]>
Subject: Re: [PATCH] ARM: dts: imx: Fix eMMC boot on Data Modul i.MX8M Plus eDM SBCOn 7/6/2023 7:26 AM, Marek Vasut wrote:
Quoted 8 lines
Quoted 6 lines
In case the i.MX8M Plus starts from eMMC BOOT1/BOOT2 HW partitions, the flash.bin container is stored at offset 0 from the start, that means the fitImage itb is at offset
0x2c0instead of0x300sectors from the start. Handle this difference in customspl_mmc_get_uboot_raw_sector().Signed-off-by Marek Vasut <[email protected]>Reviewed-by Peng Fan <[email protected]>
Best Regards,
Jaehoon Chung
Quoted 34 lines
Quoted 34 lines
---
Cc: Fabio Estevam <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Stefano Babic <[email protected]>--- board/data_modul/imx8mp_edm_sbc/spl.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)board/data_modul/imx8mp_edm_sbc/spl.c +14
-0@@ -107,6 +107,20 @@ void board_boot_order(u32 *spl_boot_list) spl_boot_list[4 ] =BOOT_DEVICE_NONE ; } +unsigned long spl_mmc_get_uboot_raw_sector (struct mmc *mmc,unsigned long sect) +{ +const u32 boot_dev =spl_boot_device (); +int part; + +if (boot_dev ==BOOT_DEVICE_MMC2 ) {/* eMMC */ + part =spl_mmc_emmc_boot_partition (mmc); +if (part ==1 || part ==2 )/* eMMC BOOT1/BOOT2 HW partitions */ +return sect -0x40 ; + } + +return sect; +} +static struct dram_timing_info *dram_timing_info[8 ] = { &dmo_imx8mp_sbc_dram_timing_32_32,/* 32 Gbit x32 */ NULL ,/* 32 Gbit x16 */
PATCH 1/1 ARM: dts: imx: Fix eMMC boot on Data Modul i.MX8M Plus eDM SBC
In reply to Marek VasutQuoted 7 lines
In case the i.MX8M Plus starts from eMMC BOOT1/BOOT2 HW partitions, the flash.bin container is stored at offset 0 from the start, that means the fitImage itb is at offset
0x2c0instead of0x300sectors from the start. Handle this difference in customspl_mmc_get_uboot_raw_sector().Signed-off-by Marek Vasut <[email protected]>Reviewed-by Peng Fan <[email protected]>Reviewed-by Jaehoon Chung <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================