ARM: dts: BCM53573: Drop nonexistent "default-off" LED trigger

From: Rafał Miłecki <[email protected]>

There is no such trigger documented or implemented in Linux. It was a copy & paste mistake.

This fixes:
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: leds: led-wlan:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:

        'default-off' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'none', 'torch', 'usb-gadget', 'usb-host', 'usbport']
        'default-off' does not match '^cpu[0-9]*$'
        'default-off' does not match '^hci[0-9]+-power$'
        'default-off' does not match '^mmc[0-9]+$'
        'default-off' does not match '^phy[0-9]+tx$'
        From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml

---
 arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 1 -
 arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts  | 2 --
 2 files changed, 3 deletions(-)

index 0734aa249b8e..b9dd50844419 100644
@@ -26,7 +26,6 @@ leds {
 		led-wlan {
 			label = "bcm53xx:blue:wlan";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
 		led-system {

index e6fb6cbe6963..cb22ae2a02e5 100644
@@ -26,7 +26,6 @@ leds-0 {
 		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
 		led-system {

@@ -42,7 +41,6 @@ leds-1 {
 		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 	};
 

2.35.3

From: Rafał Miłecki <[email protected]>

Such property simply doesn't exist (is not documented or used anywhere).

This fixes:
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: usb@d000: Unevaluated properties are not allowed ('#usb-cells' was unexpected)
From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml

---
 arch/arm/boot/dts/broadcom/bcm53573.dtsi | 2 --
 1 file changed, 2 deletions(-)

index 3f03a381db0f..3cb71829e859 100644
@@ -156,8 +156,6 @@ ehci_port2: port@2 {
 			};
 
 			ohci: usb@d000 {
-				#usb-cells = <0>;
-
 				compatible = "generic-ohci";
 				reg = <0xd000 0x1000>;
 				interrupt-parent = <&gic>;

2.35.3

From: Florian Fainelli <[email protected]>

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks! --
Florian

From: Rafał Miłecki <[email protected]>

This fixes:
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: pcie@2000: '#address-cells' is a required property
From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: pcie@2000: '#size-cells' is a required property
From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml

Two properties that need to be added later are "device_type" and "ranges". Adding "device_type" on its own causes a new warning and the value of "ranges" needs to be determined yet.

---
 arch/arm/boot/dts/broadcom/bcm53573.dtsi | 3 +++
 1 file changed, 3 insertions(+)

index 3cb71829e859..eed1a6147f0b 100644
@@ -127,6 +127,9 @@ uart0: serial@300 {
 
 		pcie0: pcie@2000 {
 			reg = <0x00002000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
 		};
 
 		usb2: usb2@4000 {

2.35.3

From: Florian Fainelli <[email protected]>

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks! --
Florian

From: Rafał Miłecki <[email protected]>

Switch away from deprecated properties.

This fixes:
arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-sck: False schema does not allow [[3, 21, 0]]
From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-miso: False schema does not allow [[3, 22, 0]]
From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-mosi: False schema does not allow [[3, 23, 0]]
From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: 'sck-gpios' is a required property
From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: Unevaluated properties are not allowed ('gpio-miso', 'gpio-mosi', 'gpio-sck' were unexpected)
From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml

---
 arch/arm/boot/dts/broadcom/bcm947189acdbmr.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

index 3709baa2376f..0b8727ae6f16 100644
@@ -60,9 +60,9 @@ button-wps {
 	spi {
 		compatible = "spi-gpio";
 		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 21 0>;
-		gpio-miso = <&chipcommon 22 0>;
-		gpio-mosi = <&chipcommon 23 0>;
+		sck-gpios = <&chipcommon 21 0>;
+		miso-gpios = <&chipcommon 22 0>;
+		mosi-gpios = <&chipcommon 23 0>;
 		cs-gpios = <&chipcommon 24 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;

2.35.3

From: Florian Fainelli <[email protected]>

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks! --
Florian

From: Florian Fainelli <[email protected]>

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks! --
Florian