fix resize issues on large screens
cover fix resize issues on large screens
When opening gitk in a multi-monitor setup with different resolutions, the resize factor causes the first columns of the layout get bigger and bigger while the other columns (author, date in upper pane, file list in lower pane) shrink to a minimum size.
The following setup triggers the problem on Fedora 38/Gnome 44:
* primary screen 1 has a FHD resolution (1920x1080)
* secondary screen 2 has a QHD resolution (2560x1440)
Every time gitk opens at screen 2, the resize is triggered and the columns are shifted 1.33x to the right (2560/1920 = 1.33).
After multiple rounds of closing/opening gitk, the columns are at their minimum size and the contents are not visible or only a minimum is visible.
The following patches are two approaches to fix the problem. Maybe the hard-coded values could be variables, this is a first shot to solve the problem.
Georg Müller (2):
gitk: limit factor scaling on resize to widths below 1900px
gitk: keep author and date colums to a minimal width on resize
gitk-git/gitk | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-)
--
2.41.0
PATCH 1/2 gitk: limit factor scaling on resize to widths below 1900px
If old and new width is above 1900, the scaling would result in widening the author and date column unnecessarily.
--- gitk-git/gitk | 6 ++++++ 1 file changed, 6 insertions(+)
gitk-git/gitk +6 -0
@@ -2985,6 +2985,9 @@ proc resizeclistpanes {win w} { set s0 [$win sash coord 0] set s1 [$win sash coord 1] } + if {$oldwidth($win) > 1900 && $w > 1900} { + return + } if {$w < 60} { set sash0 [expr {int($w/2 - 2)}] set sash1 [expr {int($w*5/6 - 2)}]
@@ -3029,6 +3032,9 @@ proc resizecdetpanes {win w} { } else { set s0 [$win sash coord 0] } + if {$oldwidth($win) > 1900 && $w > 1900} { + return + } if {$w < 60} { set sash0 [expr {int($w*3/4 - 2)}] } else {
--
2.41.0
PATCH 2/2 gitk: keep author and date colums to a minimal width on resize
In reply to Georg Müller--- gitk-git/gitk | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)
gitk-git/gitk +16 -2
@@ -2973,7 +2973,7 @@ proc savestuff {w} { } proc resizeclistpanes {win w} { - global oldwidth oldsash use_ttk + global oldwidth oldsash use_ttk charspc if {[info exists oldwidth($win)]} { if {[info exists oldsash($win)]} { set s0 [lindex $oldsash($win) 0]
@@ -3007,7 +3007,16 @@ proc resizeclistpanes {win w} { set sash0 [expr {$sash1 - 20}] } } + if {$w > 150 * $charspc} { + if {$sash1 + (20 * $charspc) > $w} { + set sash1 [expr {$w - (20 * $charspc)}] + } + if {$sash0 + (30 * $charspc) > $sash1} { + set sash0 [expr {$sash1 - (30 * $charspc)}] + } + } } + if {$use_ttk} { $win sashpos 0 $sash0 $win sashpos 1 $sash1
@@ -3023,7 +3032,7 @@ proc resizeclistpanes {win w} { } proc resizecdetpanes {win w} { - global oldwidth oldsash use_ttk + global oldwidth oldsash use_ttk charspc if {[info exists oldwidth($win)]} { if {[info exists oldsash($win)]} { set s0 $oldsash($win)
@@ -3046,6 +3055,11 @@ proc resizecdetpanes {win w} { if {$sash0 > $w - 15} { set sash0 [expr {$w - 15}] } + if {$w > 150 * $charspc} { + if {$sash0 + (30 * $charspc) > $w} { + set sash0 [expr {$w - (30 * $charspc)}] + } + } } if {$use_ttk} { $win sashpos 0 $sash0
--
2.41.0
Am 08.07.23 um 12:55 schrieb Georg Müller:
Quoted 15 lines
When opening gitk in a multi-monitor setup with different resolutions, the resize factor causes the first columns of the layout get bigger and bigger while the other columns (author, date in upper pane, file list in lower pane) shrink to a minimum size.
The following setup triggers the problem on Fedora 38/Gnome 44:
* primary screen 1 has a FHD resolution (1920x1080)
* secondary screen 2 has a QHD resolution (2560x1440)Every time gitk opens at screen 2, the resize is triggered and the columns are shifted 1.33x to the right (2560/1920 = 1.33).
After multiple rounds of closing/opening gitk, the columns are at their minimum size and the contents are not visible or only a minimum is visible.
Quoted 3 lines
The following patches are two approaches to fix the problem. Maybe the hard-coded values could be variables, this is a first shot to solve the problem.
Since you haven't stated it explicitly, I assume that with "the problem solved" the resizing does not happen anymore. That's fine, but could be stated explicitly.
When you say "two approaches", do you mean that the patches are independent and either one solves the problem? And only one of them should be taken?
I've not read the code changes (because I don't know a lot of Tcl/Tk). But I've seen the commit messages of the patches. They are mostly empty. This cover letter has a pretty good explanation of the problem. Please copy everything that is relevant for each commit to the commit message, because the cover letter won't be available in the commit history.
Thanks,
-- Hannes
Quoted 12 lines
Georg Müller (2):
gitk: limit factor scaling on resize to widths below 1900px
gitk: keep author and date colums to a minimal width on resizegitk-git/gitk | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-)--
2.41.0
Am 10.07.23 um 18:37 schrieb Johannes Sixt:
Quoted 28 lines
Am 08.07.23 um 12:55 schrieb Georg Müller:
Quoted 15 lines
When opening gitk in a multi-monitor setup with different resolutions, the resize factor causes the first columns of the layout get bigger and bigger while the other columns (author, date in upper pane, file list in lower pane) shrink to a minimum size.
The following setup triggers the problem on Fedora 38/Gnome 44:
* primary screen 1 has a FHD resolution (1920x1080)
* secondary screen 2 has a QHD resolution (2560x1440)Every time gitk opens at screen 2, the resize is triggered and the columns are shifted 1.33x to the right (2560/1920 = 1.33).
After multiple rounds of closing/opening gitk, the columns are at their minimum size and the contents are not visible or only a minimum is visible.Quoted 3 lines
The following patches are two approaches to fix the problem. Maybe the hard-coded values could be variables, this is a first shot to solve the problem.
Since you haven't stated it explicitly, I assume that with "the problem solved" the resizing does not happen anymore. That's fine, but could be stated explicitly.
When you say "two approaches", do you mean that the patches are independent and either one solves the problem? And only one of them should be taken?
Quoted 8 lines
I've not read the code changes (because I don't know a lot of Tcl/Tk). But I've seen the commit messages of the patches. They are mostly empty. This cover letter has a pretty good explanation of the problem. Please copy everything that is relevant for each commit to the commit message, because the cover letter won't be available in the commit history.
Thanks,
-- Hannes
Thank you for your suggestions. I will rephrase the commit messages and will resend the commits.
In general, the patches are independent and both solve it for me, but both of them make sense since scaling author and date columns above a certain resolution does not make sense anymore and having a sane minimum width if there is enough space for the first column also makes sense.
Best regards,
Georg
Quoted 13 lines
Quoted 12 lines
Georg Müller (2):
gitk: limit factor scaling on resize to widths below 1900px
gitk: keep author and date colums to a minimal width on resizegitk-git/gitk | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-)--
2.41.0