Skip to contentSkip to conversation

Speedup IGT build time

PATCH In review Mauro Carvalho Chehab 4 participants 25 messages Jul 10, 2023 – Sep 4, 2023 3 messages not in the archive

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v5 cover Speedup IGT build time

From: Mauro Carvalho Chehab <[email protected]>

Currently, even a single change on IGT makes the build time too slow.

This is because it will re-generate the check testlist on every single build that touches any file.

Change the logic to generate per-file testlists, with speeds up build time from 22 seconds to 4 seconds.

It can be improved even further after changing the build logic to maintain separate test_executables for i915, kms and xe.

As there's a pending patch series touching those tests, moving them to tests/intel directory, let's not do a conflicting change. Once such patch series gets merged, I'll write a patch with the pending optimization.

---

v5:
- add an extra patch at the end to gain extra 3x performance at the testlist check logic by using pre-compiled regexes, and do some additional regex compile cleanups.

v4:
- fix dependency chain for igt-doc.py;
- create an intel-ci.testlist with core tests and tests for intel drivers.

v3:
- custom_target that generates testlist is now simpler and should work better.

v2:
- make it compatible with Meson 0.47;
- added a patch to simplify tests/meson.build
- dropped a change at gem_stress - maybe there's a real reason why this one was excluded from test_list, so let's keep it as-is.

Mauro Carvalho Chehab (7):
tests/meson.build: Simplify builds for core and i915 targets lib/igt_core: use the macro when checking for list_subtests lib/igt_core: add an option to show the testlist tests/meson.build: create testlists for tests scripts/test_list.py: speedup testlist check logic tests/build: Generate and store an intel-ci.testlist scripts/test_list.py: optimize check regex

 docs/testplan/meson.build  |   2 +-
 lib/igt_core.c             |  26 +++-
 scripts/test_list.py       |  50 +++----
 tests/intel-ci/meson.build |   8 ++
 tests/meson.build          | 272 +++++++++++++++----------------------
 5 files changed, 152 insertions(+), 206 deletions(-)
Signature · 1 line
2.40.1
#1 lore raw

PATCH v5 1/7 tests/meson.build: Simplify builds for core and i915 targets

From: Mauro Carvalho Chehab <[email protected]>

There are some tests that either require:
- extra dependencies
- extra source files

Right now, they have special executable() targets that are handled outside the normal way. remove those special targets, converting them into simple ones, and using two extra dictionaries to map those extra requirements.

This makes the meson.build file a lot simpler, and makes easier to add other rules when creating test lists.

---
 tests/meson.build | 223 +++++++++++++---------------------------------
 1 file changed, 61 insertions(+), 162 deletions(-)
tests/meson.build +61 -162
index ee066b84900b..3116c458d60b 100644
@@ -3,12 +3,14 @@ test_progs = [
 	'core_getclient',
 	'core_getstats',
 	'core_getversion',
+	'core_hotunplug',
 	'core_setmaster',
 	'core_setmaster_vs_auth',
 	'debugfs_test',
 	'dmabuf',
 	'dmabuf_sync_file',
 	'device_reset',
+	'dumb_buffer',
 	'drm_buddy',
 	'drm_mm',
 	'drm_read',
@@ -21,6 +23,7 @@ test_progs = [
 	'kms_atomic_interruptible',
 	'kms_atomic_transition',
 	'kms_bw',
+	'kms_color',
 	'kms_concurrent',
 	'kms_content_protection',
 	'kms_cursor_crc',
@@ -77,7 +80,9 @@ test_progs = [
 	'syncobj_basic',
 	'syncobj_wait',
 	'syncobj_timeline',
+	'sw_sync',
 	'template',
+	'testdisplay',
 	'tools_test',
 	'vgem_basic',
 	'vgem_slow',
@@ -86,16 +91,19 @@ test_progs = [
 i915_progs = [
 	'api_intel_allocator',
 	'api_intel_bb',
+	'drm_fdinfo',
 	'gen3_mixed_blits',
 	'gen3_render_linear_blits',
 	'gen3_render_mixed_blits',
 	'gen3_render_tiledx_blits',
 	'gen3_render_tiledy_blits',
 	'gem_bad_reloc',
+	'gem_barrier_race',
 	'gem_basic',
 	'gem_blits',
 	'gem_busy',
 	'gem_caching',
+	'gem_create',
 	'gem_ccs',
 	'gem_close',
 	'gem_close_race',
@@ -105,16 +113,20 @@ i915_progs = [
 	'gem_ctx_create',
 	'gem_ctx_engines',
 	'gem_ctx_exec',
+	'gem_ctx_freq',
 	'gem_ctx_isolation',
 	'gem_ctx_param',
 	'gem_ctx_persistence',
 	'gem_ctx_shared',
+	'gem_ctx_sseu',
 	'gem_ctx_switch',
+	'gem_eio',
 	'gem_evict_alignment',
 	'gem_evict_everything',
 	'gem_exec_alignment',
 	'gem_exec_async',
 	'gem_exec_await',
+	'gem_exec_balancer',
 	'gem_exec_basic',
 	'gem_exec_big',
 	'gem_exec_capture',
@@ -157,6 +169,7 @@ i915_progs = [
 	'gem_media_vme',
 	'gem_mmap',
 	'gem_mmap_gtt',
+	'gem_mmap_offset',
 	'gem_mmap_wc',
 	'gem_partial_pwrite_pread',
 	'gem_pipe_control_store_loop',
@@ -200,6 +213,8 @@ i915_progs = [
 	'gem_wait',
 	'gem_watchdog',
 	'gem_workarounds',
+	'perf',
+	'perf_pmu',
 	'i915_fb_tiling',
 	'i915_getparams_basic',
 	'i915_pm_freq_api',
@@ -209,9 +224,11 @@ i915_progs = [
 	'i915_pciid',
 	'i915_pipe_stress',
 	'i915_pm_backlight',
+	'i915_pm_freq_mult',
 	'i915_pm_lpsp',
 	'i915_pm_rpm',
 	'i915_pm_dc',
+	'i915_pm_rc6_residency',
 	'i915_pm_rps',
 	'i915_pm_sseu',
 	'i915_power',
@@ -224,6 +241,7 @@ i915_progs = [
 	'kms_ccs',
 	'kms_cdclk',
 	'kms_draw_crc',
+	'kms_dsc',
 	'kms_fb_coherency',
 	'kms_fbcon_fbt',
 	'kms_fence_pin_leak',
@@ -234,6 +252,7 @@ i915_progs = [
 	'kms_mmap_write_crc',
 	'kms_pipe_b_c_ivb',
 	'kms_psr',
+	'kms_psr2_sf',
 	'kms_psr2_su',
 	'kms_psr_stress_test',
 	'kms_pwrite_crc',
@@ -301,12 +320,41 @@ if libdrm_nouveau.found()
 	test_deps += libdrm_nouveau
 endif
 
+# Extra sources used on core and Intel drivers
+extra_sources = {
+	'core_hotunplug': [ 'core_hotunplug.c' ],
+	'dumb_buffer': ['dumb_buffer.c' ],
+	'testdisplay': [ 'testdisplay_hotplug.c' ],
+	'kms_color':  [ 'kms_color_helper.c' ],
+	'kms_dsc': [ join_paths ('i915', 'kms_dsc_helper.c') ],
+	'kms_psr2_sf':  [ join_paths ('i915', 'kms_dsc_helper.c') ],
+}
+
+# Extra dependencies used on core and Intel drivers
+extra_dependencies = {
+	'core_hotunplug': [ lib_igt_i915_perf ],
+	'drm_fdinfo': [ lib_igt_drm_fdinfo ],
+	'dumb_buffer':  [ libatomic ],
+	'gem_barrier_race': [ lib_igt_i915_perf ],
+	'gem_create': [ libatomic ],
+	'gem_ctx_freq': [ lib_igt_perf ],
+	'gem_ctx_sseu': [ lib_igt_perf ],
+	'gem_eio': [ realtime ],
+	'gem_exec_balancer': [ lib_igt_perf ],
+	'gem_mmap_offset': [ libatomic ],
+	'i915_pm_freq_mult': [ lib_igt_perf ],
+	'i915_pm_rc6_residency': [ lib_igt_perf ],
+	'perf': [ lib_igt_i915_perf ],
+	'perf_pmu':  [ lib_igt_perf ],
+	'sw_sync': [ libatomic ],
+}
+
 test_executables = []
 test_list = []
 
 foreach prog : test_progs
-	test_executables += executable(prog, prog + '.c',
-		   dependencies : test_deps,
+	test_executables += executable(prog, [prog + '.c'] + extra_sources.get(prog, []),
+		   dependencies : test_deps + extra_dependencies.get(prog, []),
 		   install_dir : libexecdir,
 		   install_rpath : libexecdir_rpathdir,
 		   install : true)
@@ -315,8 +363,8 @@ endforeach
 
 foreach prog : i915_progs
 	test_executables += executable(prog,
-		   join_paths('i915', prog + '.c'),
-		   dependencies : test_deps,
+		   [join_paths('i915', prog + '.c')] + extra_sources.get(prog, []),
+		   dependencies : test_deps + extra_dependencies.get(prog, []),
 		   install_dir : libexecdir,
 		   install_rpath : libexecdir_rpathdir,
 		   install : true)
@@ -326,8 +374,8 @@ endforeach
 if build_xe
 	foreach prog : xe_progs
 		test_executables += executable(prog,
-			   join_paths('xe', prog + '.c'),
-			   dependencies : test_deps,
+			   [join_paths('xe', prog + '.c')] + extra_sources.get(prog, []),
+			   dependencies : test_deps + extra_dependencies.get(prog, []),
 			   install_dir : libexecdir,
 			   install_rpath : libexecdir_rpathdir,
 			   install : true)
@@ -357,165 +405,16 @@ if chamelium.found()
 		test_list += prog
 	endforeach
 	test_deps += chamelium
-endif
-
-test_executables += executable('drm_fdinfo',
-	   join_paths('i915', 'drm_fdinfo.c'),
-	   dependencies : test_deps + [ lib_igt_drm_fdinfo ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'drm_fdinfo'
-
-test_executables += executable('dumb_buffer', 'dumb_buffer.c',
-	   dependencies : test_deps + [ libatomic ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'dumb_buffer'
-
-test_executables += executable('gem_create',
-	   join_paths('i915', 'gem_create.c'),
-	   dependencies : test_deps + [ libatomic ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'gem_create'
-
-test_executables += executable('gem_ctx_freq',
-	   join_paths('i915', 'gem_ctx_freq.c'),
-	   dependencies : test_deps + [ lib_igt_perf ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'gem_ctx_freq'
-
-test_executables += executable('gem_ctx_sseu',
-	   join_paths('i915', 'gem_ctx_sseu.c'),
-	   dependencies : test_deps + [ lib_igt_perf ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'gem_ctx_sseu'
-
-test_executables += executable('gem_eio',
-	   join_paths('i915', 'gem_eio.c'),
-	   dependencies : test_deps + [ realtime ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'gem_eio'
-
-test_executables += executable('gem_exec_balancer', 'i915/gem_exec_balancer.c',
-	   dependencies : test_deps + [ lib_igt_perf ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'gem_exec_balancer'
-
-test_executables += executable('gem_mmap_offset',
-	   join_paths('i915', 'gem_mmap_offset.c'),
-	   dependencies : test_deps + [ libatomic ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'gem_mmap_offset'
-
-test_executables += executable('i915_pm_freq_mult',
-	   join_paths('i915', 'i915_pm_freq_mult.c'),
-	   dependencies : test_deps + [ lib_igt_perf ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'i915_pm_freq_mult'
 
-test_executables += executable('i915_pm_rc6_residency',
-	   join_paths('i915', 'i915_pm_rc6_residency.c'),
-	   dependencies : test_deps + [ lib_igt_perf ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'i915_pm_rc6_residency'
-
-test_executables += executable('gem_barrier_race',
-	   join_paths('i915', 'gem_barrier_race.c'),
-	   dependencies : test_deps + [ lib_igt_i915_perf ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'gem_barrier_race'
-
-test_executables += executable('perf_pmu',
-	   join_paths('i915', 'perf_pmu.c'),
-	   dependencies : test_deps + [ lib_igt_perf ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'perf_pmu'
-
-test_executables += executable('perf',
-	   join_paths('i915', 'perf.c'),
-	   dependencies : test_deps + [ lib_igt_i915_perf ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'perf'
-
-test_executables += executable('core_hotunplug', 'core_hotunplug.c',
-	   dependencies : test_deps + [ lib_igt_i915_perf ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'core_hotunplug'
-
-executable('testdisplay', ['testdisplay.c', 'testdisplay_hotplug.c'],
-	   dependencies : test_deps,
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'testdisplay'
-
-test_executables += executable('kms_color',
-	   [ 'kms_color.c', 'kms_color_helper.c' ],
-	   dependencies : test_deps,
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'kms_color'
-
-test_executables += executable('kms_dsc',
-	   [ join_paths('i915', 'kms_dsc.c'), join_paths ('i915', 'kms_dsc_helper.c')],
-	   dependencies : test_deps,
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'kms_dsc'
-
-test_executables += executable('kms_psr2_sf',
-	   [ join_paths('i915', 'kms_psr2_sf.c'), join_paths ('i915', 'kms_dsc_helper.c')],
-	   dependencies : test_deps,
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'kms_psr2_sf'
-
-if chamelium.found()
-       test_executables += executable('kms_chamelium_color',
-                             [ 'chamelium/kms_chamelium_color.c', 'kms_color_helper.c' ],
-                             dependencies : test_deps + [ chamelium ],
-                             install_dir : libexecdir,
-                             install_rpath : libexecdir_rpathdir,
-                             install : true)
-       test_list += 'kms_chamelium_color'
+	test_executables += executable('kms_chamelium_color',
+				[ 'chamelium/kms_chamelium_color.c', 'kms_color_helper.c' ],
+				dependencies : test_deps + [ chamelium ],
+				install_dir : libexecdir,
+				install_rpath : libexecdir_rpathdir,
+				install : true)
+	test_list += 'kms_chamelium_color'
 endif
 
-test_executables += executable('sw_sync', 'sw_sync.c',
-	   dependencies : test_deps + [ libatomic ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'sw_sync'
-
 subdir('amdgpu')
 
 subdir('v3d')
Signature · 1 line
2.40.1
Reviewed-by on v5 1/7
#2 lore raw

Re: [igt-dev] [PATCH i-g-t v5 1/7] tests/meson.build: Simplify builds for core and i915 targets

Hi Mauro,

Quoted 11 lines · Mauro Carvalho Chehab

From: Mauro Carvalho Chehab <[email protected]>

There are some tests that either require:
- extra dependencies
- extra source files

Right now, they have special executable() targets that are handled outside the normal way. remove those special targets, converting them into simple ones, and using two extra dictionaries to map those extra requirements.

Quoted 4 lines

This makes the meson.build file a lot simpler, and makes easier to add other rules when creating test lists.

Thank you for making this simpler,

Quoted 369 lines
---
 tests/meson.build | 223 +++++++++++++---------------------------------
 1 file changed, 61 insertions(+), 162 deletions(-)
tests/meson.build +61 -162
index ee066b84900b..3116c458d60b 100644
@@ -3,12 +3,14 @@ test_progs = [
 	'core_getclient',
 	'core_getstats',
 	'core_getversion',
+	'core_hotunplug',
 	'core_setmaster',
 	'core_setmaster_vs_auth',
 	'debugfs_test',
 	'dmabuf',
 	'dmabuf_sync_file',
 	'device_reset',
+	'dumb_buffer',
 	'drm_buddy',
 	'drm_mm',
 	'drm_read',
@@ -21,6 +23,7 @@ test_progs = [
 	'kms_atomic_interruptible',
 	'kms_atomic_transition',
 	'kms_bw',
+	'kms_color',
 	'kms_concurrent',
 	'kms_content_protection',
 	'kms_cursor_crc',
@@ -77,7 +80,9 @@ test_progs = [
 	'syncobj_basic',
 	'syncobj_wait',
 	'syncobj_timeline',
+	'sw_sync',
 	'template',
+	'testdisplay',
 	'tools_test',
 	'vgem_basic',
 	'vgem_slow',
@@ -86,16 +91,19 @@ test_progs = [
 i915_progs = [
 	'api_intel_allocator',
 	'api_intel_bb',
+	'drm_fdinfo',
 	'gen3_mixed_blits',
 	'gen3_render_linear_blits',
 	'gen3_render_mixed_blits',
 	'gen3_render_tiledx_blits',
 	'gen3_render_tiledy_blits',
 	'gem_bad_reloc',
+	'gem_barrier_race',
 	'gem_basic',
 	'gem_blits',
 	'gem_busy',
 	'gem_caching',
+	'gem_create',
 	'gem_ccs',
 	'gem_close',
 	'gem_close_race',
@@ -105,16 +113,20 @@ i915_progs = [
 	'gem_ctx_create',
 	'gem_ctx_engines',
 	'gem_ctx_exec',
+	'gem_ctx_freq',
 	'gem_ctx_isolation',
 	'gem_ctx_param',
 	'gem_ctx_persistence',
 	'gem_ctx_shared',
+	'gem_ctx_sseu',
 	'gem_ctx_switch',
+	'gem_eio',
 	'gem_evict_alignment',
 	'gem_evict_everything',
 	'gem_exec_alignment',
 	'gem_exec_async',
 	'gem_exec_await',
+	'gem_exec_balancer',
 	'gem_exec_basic',
 	'gem_exec_big',
 	'gem_exec_capture',
@@ -157,6 +169,7 @@ i915_progs = [
 	'gem_media_vme',
 	'gem_mmap',
 	'gem_mmap_gtt',
+	'gem_mmap_offset',
 	'gem_mmap_wc',
 	'gem_partial_pwrite_pread',
 	'gem_pipe_control_store_loop',
@@ -200,6 +213,8 @@ i915_progs = [
 	'gem_wait',
 	'gem_watchdog',
 	'gem_workarounds',
+	'perf',
+	'perf_pmu',
 	'i915_fb_tiling',
 	'i915_getparams_basic',
 	'i915_pm_freq_api',
@@ -209,9 +224,11 @@ i915_progs = [
 	'i915_pciid',
 	'i915_pipe_stress',
 	'i915_pm_backlight',
+	'i915_pm_freq_mult',
 	'i915_pm_lpsp',
 	'i915_pm_rpm',
 	'i915_pm_dc',
+	'i915_pm_rc6_residency',
 	'i915_pm_rps',
 	'i915_pm_sseu',
 	'i915_power',
@@ -224,6 +241,7 @@ i915_progs = [
 	'kms_ccs',
 	'kms_cdclk',
 	'kms_draw_crc',
+	'kms_dsc',
 	'kms_fb_coherency',
 	'kms_fbcon_fbt',
 	'kms_fence_pin_leak',
@@ -234,6 +252,7 @@ i915_progs = [
 	'kms_mmap_write_crc',
 	'kms_pipe_b_c_ivb',
 	'kms_psr',
+	'kms_psr2_sf',
 	'kms_psr2_su',
 	'kms_psr_stress_test',
 	'kms_pwrite_crc',
@@ -301,12 +320,41 @@ if libdrm_nouveau.found()
 	test_deps += libdrm_nouveau
 endif
 
+# Extra sources used on core and Intel drivers
+extra_sources = {
+	'core_hotunplug': [ 'core_hotunplug.c' ],
+	'dumb_buffer': ['dumb_buffer.c' ],
+	'testdisplay': [ 'testdisplay_hotplug.c' ],
+	'kms_color':  [ 'kms_color_helper.c' ],
+	'kms_dsc': [ join_paths ('i915', 'kms_dsc_helper.c') ],
+	'kms_psr2_sf':  [ join_paths ('i915', 'kms_dsc_helper.c') ],
+}
+
+# Extra dependencies used on core and Intel drivers
+extra_dependencies = {
+	'core_hotunplug': [ lib_igt_i915_perf ],
+	'drm_fdinfo': [ lib_igt_drm_fdinfo ],
+	'dumb_buffer':  [ libatomic ],
+	'gem_barrier_race': [ lib_igt_i915_perf ],
+	'gem_create': [ libatomic ],
+	'gem_ctx_freq': [ lib_igt_perf ],
+	'gem_ctx_sseu': [ lib_igt_perf ],
+	'gem_eio': [ realtime ],
+	'gem_exec_balancer': [ lib_igt_perf ],
+	'gem_mmap_offset': [ libatomic ],
+	'i915_pm_freq_mult': [ lib_igt_perf ],
+	'i915_pm_rc6_residency': [ lib_igt_perf ],
+	'perf': [ lib_igt_i915_perf ],
+	'perf_pmu':  [ lib_igt_perf ],
+	'sw_sync': [ libatomic ],
+}
+
 test_executables = []
 test_list = []
 
 foreach prog : test_progs
-	test_executables += executable(prog, prog + '.c',
-		   dependencies : test_deps,
+	test_executables += executable(prog, [prog + '.c'] + extra_sources.get(prog, []),
+		   dependencies : test_deps + extra_dependencies.get(prog, []),
 		   install_dir : libexecdir,
 		   install_rpath : libexecdir_rpathdir,
 		   install : true)
@@ -315,8 +363,8 @@ endforeach
 
 foreach prog : i915_progs
 	test_executables += executable(prog,
-		   join_paths('i915', prog + '.c'),
-		   dependencies : test_deps,
+		   [join_paths('i915', prog + '.c')] + extra_sources.get(prog, []),
+		   dependencies : test_deps + extra_dependencies.get(prog, []),
 		   install_dir : libexecdir,
 		   install_rpath : libexecdir_rpathdir,
 		   install : true)
@@ -326,8 +374,8 @@ endforeach
 if build_xe
 	foreach prog : xe_progs
 		test_executables += executable(prog,
-			   join_paths('xe', prog + '.c'),
-			   dependencies : test_deps,
+			   [join_paths('xe', prog + '.c')] + extra_sources.get(prog, []),
+			   dependencies : test_deps + extra_dependencies.get(prog, []),
 			   install_dir : libexecdir,
 			   install_rpath : libexecdir_rpathdir,
 			   install : true)
@@ -357,165 +405,16 @@ if chamelium.found()
 		test_list += prog
 	endforeach
 	test_deps += chamelium
-endif
-
-test_executables += executable('drm_fdinfo',
-	   join_paths('i915', 'drm_fdinfo.c'),
-	   dependencies : test_deps + [ lib_igt_drm_fdinfo ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'drm_fdinfo'
-
-test_executables += executable('dumb_buffer', 'dumb_buffer.c',
-	   dependencies : test_deps + [ libatomic ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'dumb_buffer'
-
-test_executables += executable('gem_create',
-	   join_paths('i915', 'gem_create.c'),
-	   dependencies : test_deps + [ libatomic ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'gem_create'
-
-test_executables += executable('gem_ctx_freq',
-	   join_paths('i915', 'gem_ctx_freq.c'),
-	   dependencies : test_deps + [ lib_igt_perf ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'gem_ctx_freq'
-
-test_executables += executable('gem_ctx_sseu',
-	   join_paths('i915', 'gem_ctx_sseu.c'),
-	   dependencies : test_deps + [ lib_igt_perf ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'gem_ctx_sseu'
-
-test_executables += executable('gem_eio',
-	   join_paths('i915', 'gem_eio.c'),
-	   dependencies : test_deps + [ realtime ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'gem_eio'
-
-test_executables += executable('gem_exec_balancer', 'i915/gem_exec_balancer.c',
-	   dependencies : test_deps + [ lib_igt_perf ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'gem_exec_balancer'
-
-test_executables += executable('gem_mmap_offset',
-	   join_paths('i915', 'gem_mmap_offset.c'),
-	   dependencies : test_deps + [ libatomic ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'gem_mmap_offset'
-
-test_executables += executable('i915_pm_freq_mult',
-	   join_paths('i915', 'i915_pm_freq_mult.c'),
-	   dependencies : test_deps + [ lib_igt_perf ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'i915_pm_freq_mult'
 
-test_executables += executable('i915_pm_rc6_residency',
-	   join_paths('i915', 'i915_pm_rc6_residency.c'),
-	   dependencies : test_deps + [ lib_igt_perf ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'i915_pm_rc6_residency'
-
-test_executables += executable('gem_barrier_race',
-	   join_paths('i915', 'gem_barrier_race.c'),
-	   dependencies : test_deps + [ lib_igt_i915_perf ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'gem_barrier_race'
-
-test_executables += executable('perf_pmu',
-	   join_paths('i915', 'perf_pmu.c'),
-	   dependencies : test_deps + [ lib_igt_perf ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'perf_pmu'
-
-test_executables += executable('perf',
-	   join_paths('i915', 'perf.c'),
-	   dependencies : test_deps + [ lib_igt_i915_perf ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'perf'
-
-test_executables += executable('core_hotunplug', 'core_hotunplug.c',
-	   dependencies : test_deps + [ lib_igt_i915_perf ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'core_hotunplug'
-
-executable('testdisplay', ['testdisplay.c', 'testdisplay_hotplug.c'],
-	   dependencies : test_deps,
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'testdisplay'
-
-test_executables += executable('kms_color',
-	   [ 'kms_color.c', 'kms_color_helper.c' ],
-	   dependencies : test_deps,
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'kms_color'
-
-test_executables += executable('kms_dsc',
-	   [ join_paths('i915', 'kms_dsc.c'), join_paths ('i915', 'kms_dsc_helper.c')],
-	   dependencies : test_deps,
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'kms_dsc'
-
-test_executables += executable('kms_psr2_sf',
-	   [ join_paths('i915', 'kms_psr2_sf.c'), join_paths ('i915', 'kms_dsc_helper.c')],
-	   dependencies : test_deps,
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'kms_psr2_sf'
-
-if chamelium.found()
-       test_executables += executable('kms_chamelium_color',
-                             [ 'chamelium/kms_chamelium_color.c', 'kms_color_helper.c' ],
-                             dependencies : test_deps + [ chamelium ],
-                             install_dir : libexecdir,
-                             install_rpath : libexecdir_rpathdir,
-                             install : true)
-       test_list += 'kms_chamelium_color'
+	test_executables += executable('kms_chamelium_color',
+				[ 'chamelium/kms_chamelium_color.c', 'kms_color_helper.c' ],
+				dependencies : test_deps + [ chamelium ],
+				install_dir : libexecdir,
+				install_rpath : libexecdir_rpathdir,
+				install : true)
+	test_list += 'kms_chamelium_color'
 endif
 
-test_executables += executable('sw_sync', 'sw_sync.c',
-	   dependencies : test_deps + [ libatomic ],
-	   install_dir : libexecdir,
-	   install_rpath : libexecdir_rpathdir,
-	   install : true)
-test_list += 'sw_sync'
-
 subdir('amdgpu')
 
 subdir('v3d')
Signature · 1 line
2.40.1
#3 lore raw

PATCH v5 2/7 lib/igt_core: use the macro when checking for list_subtests

In reply to Mauro Carvalho Chehab

From: Mauro Carvalho Chehab <[email protected]>

We're implementing a new argument to display all tests. Before doing that, make the check for it more generic to prepare for the changes.

---
 lib/igt_core.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
lib/igt_core.c +5 -5
index 3ee3a01c3668..9a0029d294a8 100644
@@ -870,7 +870,7 @@ static void print_version(void)
 {
 	struct utsname uts;
 
-	if (list_subtests)
+	if (igt_only_list_subtests())
 		return;
 
 	uname(&uts);
@@ -1198,12 +1198,12 @@ static int common_init(int *argc, char **argv,
 			break;
 		case OPT_RUN_SUBTEST:
 			assert(optarg);
-			if (!list_subtests)
+			if (!igt_only_list_subtests())
 				run_single_subtest = strdup(optarg);
 			break;
 		case OPT_RUN_DYNAMIC_SUBTEST:
 			assert(optarg);
-			if (!list_subtests)
+			if (!igt_only_list_subtests())
 				run_single_dynamic_subtest = strdup(optarg);
 			break;
 		case OPT_DESCRIPTION:
@@ -1265,7 +1265,7 @@ out:
 		/* exit with no error for -h/--help */
 		exit(ret == -1 ? 0 : IGT_EXIT_INVALID);
 
-	if (!list_subtests) {
+	if (!igt_only_list_subtests()) {
 		bind_fbcon(false);
 		igt_kmsg(KMSG_INFO "%s: executing\n", command_str);
 		print_version();
@@ -3098,7 +3098,7 @@ void igt_vlog(const char *domain, enum igt_log_level level, const char *format,
 	if (!thread_id)
 		return;
 
-	if (list_subtests && level <= IGT_LOG_WARN)
+	if (igt_only_list_subtests() && level <= IGT_LOG_WARN)
 		return;
 
 	if (vasprintf(&line, format, args) == -1)
Signature · 1 line
2.40.1
Reviewed-by on v5 2/7
#4 lore raw

Re: [igt-dev] [PATCH i-g-t v5 2/7] lib/igt_core: use the macro when checking for list_subtests

Hi Mauro,

this is a function in igt_core.c: igt_only_list_subtests() so

lib/igt_core: use the macro when checking for list_subtests ----------------- ^^^^^^^^^
s/the macro/the function/

With that fixed,

Regards,
Kamil

Subject: Re: [igt-dev] [PATCH i-g-t v5 2/7] lib/igt_core: use the macro when
checking for list_subtests

Quoted 60 lines · Mauro Carvalho Chehab

From: Mauro Carvalho Chehab <[email protected]>

We're implementing a new argument to display all tests. Before doing that, make the check for it more generic to prepare for the changes.

---
 lib/igt_core.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
lib/igt_core.c +5 -5
index 3ee3a01c3668..9a0029d294a8 100644
@@ -870,7 +870,7 @@ static void print_version(void)
 {
 	struct utsname uts;
 
-	if (list_subtests)
+	if (igt_only_list_subtests())
 		return;
 
 	uname(&uts);
@@ -1198,12 +1198,12 @@ static int common_init(int *argc, char **argv,
 			break;
 		case OPT_RUN_SUBTEST:
 			assert(optarg);
-			if (!list_subtests)
+			if (!igt_only_list_subtests())
 				run_single_subtest = strdup(optarg);
 			break;
 		case OPT_RUN_DYNAMIC_SUBTEST:
 			assert(optarg);
-			if (!list_subtests)
+			if (!igt_only_list_subtests())
 				run_single_dynamic_subtest = strdup(optarg);
 			break;
 		case OPT_DESCRIPTION:
@@ -1265,7 +1265,7 @@ out:
 		/* exit with no error for -h/--help */
 		exit(ret == -1 ? 0 : IGT_EXIT_INVALID);
 
-	if (!list_subtests) {
+	if (!igt_only_list_subtests()) {
 		bind_fbcon(false);
 		igt_kmsg(KMSG_INFO "%s: executing\n", command_str);
 		print_version();
@@ -3098,7 +3098,7 @@ void igt_vlog(const char *domain, enum igt_log_level level, const char *format,
 	if (!thread_id)
 		return;
 
-	if (list_subtests && level <= IGT_LOG_WARN)
+	if (igt_only_list_subtests() && level <= IGT_LOG_WARN)
 		return;
 
 	if (vasprintf(&line, format, args) == -1)
Signature · 1 line
2.40.1
#5 lore raw

PATCH v5 3/7 lib/igt_core: add an option to show the testlist

In reply to Mauro Carvalho Chehab

From: Mauro Carvalho Chehab <[email protected]>

There are several cases where we need to list the tests the same way as igt_runner displays them.

That should not return errors on failures and should work also when igt_simple_main() macro is used.

Ideally, it should also show dynamic subtests, but this is more complex, specially for Kselftest/KUnit ones. So, for now, let's not handle dynamic ones.

Add an option to produce such testlist.

---
 lib/igt_core.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)
lib/igt_core.c +15 -1
index 9a0029d294a8..2ae2cb68835e 100644
@@ -274,6 +274,7 @@ const char *igt_interactive_debug;
 bool igt_skip_crc_compare;
 
 /* subtests helpers */
+static bool show_testlist = false;
 static bool list_subtests = false;
 static bool describe_subtests = false;
 static char *run_single_subtest = NULL;
@@ -326,6 +327,7 @@ enum {
 	 * conflict with core ones
 	 */
 	OPT_LIST_SUBTESTS = 500,
+	OPT_SHOW_TESTLIST,
 	OPT_DESCRIBE_SUBTESTS,
 	OPT_RUN_SUBTEST,
 	OPT_RUN_DYNAMIC_SUBTEST,
@@ -896,6 +898,7 @@ static void print_usage(const char *help_str, bool output_on_stderr)
 
 	fprintf(f, "Usage: %s [OPTIONS]\n", command_str);
 	fprintf(f, "  --list-subtests\n"
+		   "  --show-testlist\n"
 		   "  --run-subtest <pattern>\n"
 		   "  --dynamic-subtest <pattern>\n"
 		   "  --debug[=log-domain]\n"
@@ -1076,6 +1079,7 @@ static int common_init(int *argc, char **argv,
 	int c, option_index = 0, i, x;
 	static struct option long_options[] = {
 		{"list-subtests",     no_argument,       NULL, OPT_LIST_SUBTESTS},
+		{"show-testlist",     no_argument,       NULL, OPT_SHOW_TESTLIST},
 		{"describe",          optional_argument, NULL, OPT_DESCRIBE_SUBTESTS},
 		{"run-subtest",       required_argument, NULL, OPT_RUN_SUBTEST},
 		{"dynamic-subtest",   required_argument, NULL, OPT_RUN_DYNAMIC_SUBTEST},
@@ -1189,6 +1193,9 @@ static int common_init(int *argc, char **argv,
 			if (!run_single_subtest)
 				list_subtests = true;
 			break;
+		case OPT_SHOW_TESTLIST:
+			show_testlist = true;
+			break;
 		case OPT_DESCRIBE_SUBTESTS:
 			if (optarg)
 				run_single_subtest = strdup(optarg);
@@ -1257,6 +1264,10 @@ out:
 			igt_warn("Unknown subtest: %s\n", run_single_subtest);
 			exit(IGT_EXIT_INVALID);
 		}
+		if (show_testlist) {
+			printf("igt@%s\n", igt_test_name());
+			exit(0);
+		}
 		if (list_subtests)
 			exit(IGT_EXIT_INVALID);
 	}
@@ -1449,6 +1460,9 @@ bool __igt_run_subtest(const char *subtest_name, const char *file, const int lin
 		__igt_print_description(subtest_name, file, line);
 		_clear_current_description();
 		return false;
+	} else if (show_testlist) {
+		printf("igt@%s@%s\n", igt_test_name(), subtest_name);
+		return false;
 	} else if (list_subtests) {
 		printf("%s\n", subtest_name);
 		return false;
@@ -1522,7 +1536,7 @@ const char *igt_subtest_name(void)
  */
 bool igt_only_list_subtests(void)
 {
-	return list_subtests;
+	return list_subtests || show_testlist;
 }
 
 
Signature · 1 line
2.40.1
#6 lore raw

Re: [igt-dev] [PATCH i-g-t v5 3/7] lib/igt_core: add an option to show the testlist

Hi Mauro,

Quoted 5 lines · Mauro Carvalho Chehab

From: Mauro Carvalho Chehab <[email protected]>

There are several cases where we need to list the tests the same way as igt_runner displays them.

Quoted 8 lines

That should not return errors on failures and should work also when igt_simple_main() macro is used.

Ideally, it should also show dynamic subtests, but this is more complex, specially for Kselftest/KUnit ones. So, for now, let's not handle dynamic ones.

Add an option to produce such testlist.

---------------^
Please insert here new option name:

--show-testlist

With that you can add my r-b,

Regards,
Kamil

Quoted 85 lines
---
 lib/igt_core.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)
lib/igt_core.c +15 -1
index 9a0029d294a8..2ae2cb68835e 100644
@@ -274,6 +274,7 @@ const char *igt_interactive_debug;
 bool igt_skip_crc_compare;
 
 /* subtests helpers */
+static bool show_testlist = false;
 static bool list_subtests = false;
 static bool describe_subtests = false;
 static char *run_single_subtest = NULL;
@@ -326,6 +327,7 @@ enum {
 	 * conflict with core ones
 	 */
 	OPT_LIST_SUBTESTS = 500,
+	OPT_SHOW_TESTLIST,
 	OPT_DESCRIBE_SUBTESTS,
 	OPT_RUN_SUBTEST,
 	OPT_RUN_DYNAMIC_SUBTEST,
@@ -896,6 +898,7 @@ static void print_usage(const char *help_str, bool output_on_stderr)
 
 	fprintf(f, "Usage: %s [OPTIONS]\n", command_str);
 	fprintf(f, "  --list-subtests\n"
+		   "  --show-testlist\n"
 		   "  --run-subtest <pattern>\n"
 		   "  --dynamic-subtest <pattern>\n"
 		   "  --debug[=log-domain]\n"
@@ -1076,6 +1079,7 @@ static int common_init(int *argc, char **argv,
 	int c, option_index = 0, i, x;
 	static struct option long_options[] = {
 		{"list-subtests",     no_argument,       NULL, OPT_LIST_SUBTESTS},
+		{"show-testlist",     no_argument,       NULL, OPT_SHOW_TESTLIST},
 		{"describe",          optional_argument, NULL, OPT_DESCRIBE_SUBTESTS},
 		{"run-subtest",       required_argument, NULL, OPT_RUN_SUBTEST},
 		{"dynamic-subtest",   required_argument, NULL, OPT_RUN_DYNAMIC_SUBTEST},
@@ -1189,6 +1193,9 @@ static int common_init(int *argc, char **argv,
 			if (!run_single_subtest)
 				list_subtests = true;
 			break;
+		case OPT_SHOW_TESTLIST:
+			show_testlist = true;
+			break;
 		case OPT_DESCRIBE_SUBTESTS:
 			if (optarg)
 				run_single_subtest = strdup(optarg);
@@ -1257,6 +1264,10 @@ out:
 			igt_warn("Unknown subtest: %s\n", run_single_subtest);
 			exit(IGT_EXIT_INVALID);
 		}
+		if (show_testlist) {
+			printf("igt@%s\n", igt_test_name());
+			exit(0);
+		}
 		if (list_subtests)
 			exit(IGT_EXIT_INVALID);
 	}
@@ -1449,6 +1460,9 @@ bool __igt_run_subtest(const char *subtest_name, const char *file, const int lin
 		__igt_print_description(subtest_name, file, line);
 		_clear_current_description();
 		return false;
+	} else if (show_testlist) {
+		printf("igt@%s@%s\n", igt_test_name(), subtest_name);
+		return false;
 	} else if (list_subtests) {
 		printf("%s\n", subtest_name);
 		return false;
@@ -1522,7 +1536,7 @@ const char *igt_subtest_name(void)
  */
 bool igt_only_list_subtests(void)
 {
-	return list_subtests;
+	return list_subtests || show_testlist;
 }
 
 
Signature · 1 line
2.40.1
#7 lore raw

PATCH v5 4/7 tests/meson.build: create testlists for tests

In reply to Mauro Carvalho Chehab

From: Mauro Carvalho Chehab <[email protected]>

Let's dynamically create testlists for during build time, as this can speed up a lot the validation check for testplan.

Ideally, all it would need to to that would be to use this logic at the end of tests/meson.build:

foreach testexe : test_executables
prog = testexe.name()

output = prog.split('/').get(-1) + '.testlist' custom_target(output,
build_by_default : true, command : [ testexe, '--show-testlist'], capture : true,
output : output)

Unfortunately, this requies Meson >= 0.54. So, we need to add one custom_target per executable() call.

---
 docs/testplan/meson.build |  2 +-
 tests/meson.build         | 55 ++++++++++++++++++++++++++++++++++-----
 2 files changed, 49 insertions(+), 8 deletions(-)
docs/testplan/meson.build +1 -1
index bf73dd32a15f..e838f2eb1540 100644
@@ -12,7 +12,7 @@ i915_test_config = join_paths(source_root, 'tests', 'i915', 'i915_test_config.js
 
 check_testlist = []
 if build_tests
-	doc_dependencies = test_executables
+	doc_dependencies = testlist_files
 	# Check if documentation matches the actual tests and tests can run
 	if not meson.is_cross_build()
 		build_info += 'Will Check if documentation is in sync with testlist'
tests/meson.build +48 -7

117 lines not on this page · raw message

Signature · 1 line
2.40.1
#8 lore raw

Re: [igt-dev] [PATCH i-g-t v5 4/7] tests/meson.build: create testlists for tests

Hi Mauro,

Quoted 3 lines · Mauro Carvalho Chehab

From: Mauro Carvalho Chehab <[email protected]>

Let's dynamically create testlists for during build time, as this

------------------------------------ ^^^
s/for//

Also, in subject:
tests/meson.build: create testlists for tests
----------------------------------- ^^^^^^^^^
s/for tests/dynamically/
or /at build time/ ?

With that fixed you can add my r-b.

Quoted 15 lines

can speed up a lot the validation check for testplan.

Ideally, all it would need to to that would be to use this logic at the end of tests/meson.build:

foreach testexe : test_executables
prog = testexe.name()

output = prog.split('/').get(-1) + '.testlist' custom_target(output,
build_by_default : true, command : [ testexe, '--show-testlist'], capture : true,
output : output)

Quoted 2 lines

Unfortunately, this requies Meson >= 0.54. So, we need to add one custom_target per executable() call.

As this is touching testlist for CI, +Cc Ewelina.

Regards,
Kamil

Quoted 148 lines
---
 docs/testplan/meson.build |  2 +-
 tests/meson.build         | 55 ++++++++++++++++++++++++++++++++++-----
 2 files changed, 49 insertions(+), 8 deletions(-)
docs/testplan/meson.build +1 -1
index bf73dd32a15f..e838f2eb1540 100644
@@ -12,7 +12,7 @@ i915_test_config = join_paths(source_root, 'tests', 'i915', 'i915_test_config.js
 
 check_testlist = []
 if build_tests
-	doc_dependencies = test_executables
+	doc_dependencies = testlist_files
 	# Check if documentation matches the actual tests and tests can run
 	if not meson.is_cross_build()
 		build_info += 'Will Check if documentation is in sync with testlist'
tests/meson.build +48 -7
index 3116c458d60b..897f17ab4561 100644
@@ -351,35 +351,57 @@ extra_dependencies = {
 
 test_executables = []
 test_list = []
+testlist_files = []
 
 foreach prog : test_progs
-	test_executables += executable(prog, [prog + '.c'] + extra_sources.get(prog, []),
+	testexe = executable(prog, [prog + '.c'] + extra_sources.get(prog, []),
 		   dependencies : test_deps + extra_dependencies.get(prog, []),
 		   install_dir : libexecdir,
 		   install_rpath : libexecdir_rpathdir,
 		   install : true)
+	test_executables += testexe
 	test_list += prog
+	name = prog.split('/').get(-1)
+	testlist_files += custom_target(name + '.testlist',
+		     build_by_default : true,
+		     command : [testexe, '--show-testlist'],
+		     capture : true,
+		     output : name + '.testlist')
 endforeach
 
 foreach prog : i915_progs
-	test_executables += executable(prog,
+	testexe = executable(prog,
 		   [join_paths('i915', prog + '.c')] + extra_sources.get(prog, []),
 		   dependencies : test_deps + extra_dependencies.get(prog, []),
 		   install_dir : libexecdir,
 		   install_rpath : libexecdir_rpathdir,
 		   install : true)
+	test_executables += testexe
 	test_list += prog
+	name = prog.split('/').get(-1)
+	testlist_files += custom_target(name + '.testlist',
+		     build_by_default : true,
+		     command : [testexe, '--show-testlist'],
+		     capture : true,
+		     output : name + '.testlist')
 endforeach
 
 if build_xe
 	foreach prog : xe_progs
-		test_executables += executable(prog,
+		testexe = executable(prog,
 			   [join_paths('xe', prog + '.c')] + extra_sources.get(prog, []),
 			   dependencies : test_deps + extra_dependencies.get(prog, []),
 			   install_dir : libexecdir,
 			   install_rpath : libexecdir_rpathdir,
 			   install : true)
 		test_list += prog
+		test_executables += testexe
+		name = prog.split('/').get(-1)
+		testlist_files += custom_target(name + '.testlist',
+			     build_by_default : true,
+			     command : [testexe, '--show-testlist'],
+			     capture : true,
+			     output : name + '.testlist')
 	endforeach
 	build_info += 'Xe **experimental** tests enabled.'
 endif
@@ -395,7 +417,7 @@ endforeach
 
 if chamelium.found()
 	foreach prog : chamelium_progs
-		test_executables += executable(prog,
+		testexe = executable(prog,
 				 [join_paths('chamelium', prog + '.c'),
 					join_paths('chamelium', 'kms_chamelium_helper.c')],
 				 dependencies : test_deps,
@@ -403,16 +425,30 @@ if chamelium.found()
 				 install_rpath : libexecdir_rpathdir,
 				 install : true)
 		test_list += prog
+		test_executables += testexe
+		name = prog.split('/').get(-1)
+		testlist_files += custom_target(name + '.testlist',
+			     build_by_default : true,
+			     command : [testexe, '--show-testlist'],
+			     capture : true,
+			     output : name + '.testlist')
 	endforeach
 	test_deps += chamelium
 
-	test_executables += executable('kms_chamelium_color',
+	name = 'kms_chamelium_color'
+	testexe = executable('kms_chamelium_color',
 				[ 'chamelium/kms_chamelium_color.c', 'kms_color_helper.c' ],
 				dependencies : test_deps + [ chamelium ],
 				install_dir : libexecdir,
 				install_rpath : libexecdir_rpathdir,
 				install : true)
-	test_list += 'kms_chamelium_color'
+	test_list += name
+	test_executables += testexe
+	testlist_files += custom_target(name + '.testlist',
+		     build_by_default : true,
+		     command : [testexe, '--show-testlist'],
+		     capture : true,
+		     output : name + '.testlist')
 endif
 
 subdir('amdgpu')
@@ -448,11 +484,16 @@ foreach prog : test_list
 	test('testcase check ' + prog, test_script, args : prog)
 endforeach
 
-executable('gem_stress', 'i915/gem_stress.c',
+testexe = executable('gem_stress', 'i915/gem_stress.c',
 	   install : true,
 	   install_dir : libexecdir,
 	   install_rpath : libexecdir_rpathdir,
 	   dependencies : igt_deps)
+testlist_files += custom_target('gem_stress.testlist',
+                build_by_default : true,
+                command : [testexe, '--show-testlist'],
+                capture : true,
+                output : 'gem_stress.testlist')
 
 image_files = [
   '1080p-left.png',
Signature · 1 line
2.40.1
#9 lore raw

Re: [igt-dev] [PATCH i-g-t v5 4/7] tests/meson.build: create testlists for tests

This is causing issues for IGT ChromeOS. Adding [email protected] for more context.

Quoted 189 lines · Kamil Konieczny

Hi Mauro,

Quoted 3 lines · Mauro Carvalho Chehab

From: Mauro Carvalho Chehab <[email protected]>

Let's dynamically create testlists for during build time, as this

------------------------------------ ^^^
s/for//

Also, in subject:
tests/meson.build: create testlists for tests
----------------------------------- ^^^^^^^^^
s/for tests/dynamically/
or /at build time/ ?

With that fixed you can add my r-b.

Quoted 15 lines

can speed up a lot the validation check for testplan.

Ideally, all it would need to to that would be to use this logic at the end of tests/meson.build:

foreach testexe : test_executables
prog = testexe.name()

output = prog.split('/').get(-1) + '.testlist' custom_target(output,
build_by_default : true, command : [ testexe, '--show-testlist'], capture : true,
output : output)

Quoted 2 lines

Unfortunately, this requies Meson >= 0.54. So, we need to add one custom_target per executable() call.

As this is touching testlist for CI, +Cc Ewelina.

Regards,
Kamil

Quoted 148 lines
---
 docs/testplan/meson.build |  2 +-
 tests/meson.build         | 55 ++++++++++++++++++++++++++++++++++-----
 2 files changed, 49 insertions(+), 8 deletions(-)
docs/testplan/meson.build +1 -1
index bf73dd32a15f..e838f2eb1540 100644
@@ -12,7 +12,7 @@ i915_test_config = join_paths(source_root, 'tests', 'i915', 'i915_test_config.js
 
 check_testlist = []
 if build_tests
-     doc_dependencies = test_executables
+     doc_dependencies = testlist_files
      # Check if documentation matches the actual tests and tests can run
      if not meson.is_cross_build()
              build_info += 'Will Check if documentation is in sync with testlist'
tests/meson.build +48 -8
index 3116c458d60b..897f17ab4561 100644
@@ -351,35 +351,57 @@ extra_dependencies = {
 
 test_executables = []
 test_list = []
+testlist_files = []
 
 foreach prog : test_progs
-     test_executables += executable(prog, [prog + '.c'] + extra_sources.get(prog, []),
+     testexe = executable(prog, [prog + '.c'] + extra_sources.get(prog, []),
                 dependencies : test_deps + extra_dependencies.get(prog, []),
                 install_dir : libexecdir,
                 install_rpath : libexecdir_rpathdir,
                 install : true)
+     test_executables += testexe
      test_list += prog
+     name = prog.split('/').get(-1)
+     testlist_files += custom_target(name + '.testlist',
+                  build_by_default : true,
+                  command : [testexe, '--show-testlist'],
+                  capture : true,
+                  output : name + '.testlist')
 endforeach
 
 foreach prog : i915_progs
-     test_executables += executable(prog,
+     testexe = executable(prog,
                 [join_paths('i915', prog + '.c')] + extra_sources.get(prog, []),
                 dependencies : test_deps + extra_dependencies.get(prog, []),
                 install_dir : libexecdir,
                 install_rpath : libexecdir_rpathdir,
                 install : true)
+     test_executables += testexe
      test_list += prog
+     name = prog.split('/').get(-1)
+     testlist_files += custom_target(name + '.testlist',
+                  build_by_default : true,
+                  command : [testexe, '--show-testlist'],
+                  capture : true,
+                  output : name + '.testlist')
 endforeach
 
 if build_xe
      foreach prog : xe_progs
-             test_executables += executable(prog,
+             testexe = executable(prog,
                         [join_paths('xe', prog + '.c')] + extra_sources.get(prog, []),
                         dependencies : test_deps + extra_dependencies.get(prog, []),
                         install_dir : libexecdir,
                         install_rpath : libexecdir_rpathdir,
                         install : true)
              test_list += prog
+             test_executables += testexe
+             name = prog.split('/').get(-1)
+             testlist_files += custom_target(name + '.testlist',
+                          build_by_default : true,
+                          command : [testexe, '--show-testlist'],
+                          capture : true,
+                          output : name + '.testlist')
      endforeach
      build_info += 'Xe **experimental** tests enabled.'
 endif
@@ -395,7 +417,7 @@ endforeach
 
 if chamelium.found()
      foreach prog : chamelium_progs
-             test_executables += executable(prog,
+             testexe = executable(prog,
                               [join_paths('chamelium', prog + '.c'),
                                      join_paths('chamelium', 'kms_chamelium_helper.c')],
                               dependencies : test_deps,
@@ -403,16 +425,30 @@ if chamelium.found()
                               install_rpath : libexecdir_rpathdir,
                               install : true)
              test_list += prog
+             test_executables += testexe
+             name = prog.split('/').get(-1)
+             testlist_files += custom_target(name + '.testlist',
+                          build_by_default : true,
+                          command : [testexe, '--show-testlist'],
+                          capture : true,
+                          output : name + '.testlist')
      endforeach
      test_deps += chamelium
 
-     test_executables += executable('kms_chamelium_color',
+     name = 'kms_chamelium_color'
+     testexe = executable('kms_chamelium_color',
                              [ 'chamelium/kms_chamelium_color.c', 'kms_color_helper.c' ],
                              dependencies : test_deps + [ chamelium ],
                              install_dir : libexecdir,
                              install_rpath : libexecdir_rpathdir,
                              install : true)
-     test_list += 'kms_chamelium_color'
+     test_list += name
+     test_executables += testexe
+     testlist_files += custom_target(name + '.testlist',
+                  build_by_default : true,
+                  command : [testexe, '--show-testlist'],
+                  capture : true,
+                  output : name + '.testlist')
 endif
 
 subdir('amdgpu')
@@ -448,11 +484,16 @@ foreach prog : test_list
      test('testcase check ' + prog, test_script, args : prog)
 endforeach
 
-executable('gem_stress', 'i915/gem_stress.c',
+testexe = executable('gem_stress', 'i915/gem_stress.c',
         install : true,
         install_dir : libexecdir,
         install_rpath : libexecdir_rpathdir,
         dependencies : igt_deps)
+testlist_files += custom_target('gem_stress.testlist',
+                build_by_default : true,
+                command : [testexe, '--show-testlist'],
+                capture : true,
+                output : 'gem_stress.testlist')
 
 image_files = [
   '1080p-left.png',
--

2.40.1

A message that is not in the archive (sent off-list or not yet received): CAAea8Y3a_RjknGcn6-v9CVUVpcmMuASnJKfn73KGtQzbXo0TcA@mail.gmail.com

#11 lore raw

Re: [igt-dev] [PATCH i-g-t v5 4/7] tests/meson.build: create testlists for tests

Quoted 13 lines · On Wed, 30 Aug 2023 14:49:10 -0700 Ilja Friedel <[email protected]> wrote:

Hi Mauro,

on ChromeOS we are cross-compiling binaries inside of portage/gentoo servers for consumer devices. Which means these servers are typically unable to execute the binaries. (For instance on Intel and AMD they will try to load libdrm_intel.so/libdrm_amdgpu.so even though the servers don't have a GPU and don't need these libraries). Hence we have testplan disabled while building on the server. (We run the test binaries later on the devices.) Now this change reintroduces executing the compiled binaries on the server just when building them, for a testplan phase that will never happen on the server. Would it be possible to place the equivalent of "if testplan" around this code?

Quoted 3 lines

As an aside, we don't run into problems compiling for Qualcomm/ARM. I am unclear why, as I don't see qemu or similar running. So maybe there already is a way to disable this?

Please don't top post. It makes harder to add comments at the right order :-)

Quoted 9 lines

Thank you,

Ilja.

Quoted 2 lines · Mark Yacoub

This is causing issues for IGT ChromeOS. Adding [email protected] for more context.

The testlist files are used for two purposes:

1. for documentation build;
2. for CI automation to run the tests.

While right now Intel CI doesn't depend on the produced testlists, this may change in the future. So, instead of making the testlist build dependent of testplan, the better seems to verify if the build is not a cross-compilation, e. g. with a patch similar to the enclosed one.

Could you please check if this will address the issue? I don't have a cross-compilation environment handy to test it, so it would be easier if you could test it for me.

Regards,
Mauro

---

[PATCH i-g-t] tests/meson.build: only generate testlists on native builds

cross-compiling will produce binaries that don't run at the build machine. On such cases, we cannot produce testlist files.

Detect it, to avoid IGT builds to fail on cross builds.

tests/meson.build +56 -40
index c683e468da78..adb178d0bd39 100644
@@ -370,11 +370,13 @@ foreach prog : test_progs
 	test_executables += testexe
 	test_list += prog
 	name = prog.split('/').get(-1)
-	testlist_files += custom_target(name + '.testlist',
-		     build_by_default : true,
-		     command : [testexe, '--show-testlist'],
-		     capture : true,
-		     output : name + '.testlist')
+	if not meson.is_cross_build()
+		testlist_files += custom_target(name + '.testlist',
+			    build_by_default : true,
+			    command : [testexe, '--show-testlist'],
+			    capture : true,
+			    output : name + '.testlist')
+	endif
 endforeach
 
 foreach prog : i915_progs
@@ -387,11 +389,13 @@ foreach prog : i915_progs
 	test_executables += testexe
 	test_list += prog
 	name = prog.split('/').get(-1)
-	testlist_files += custom_target(name + '.testlist',
-		     build_by_default : true,
-		     command : [testexe, '--show-testlist'],
-		     capture : true,
-		     output : name + '.testlist')
+	if not meson.is_cross_build()
+		testlist_files += custom_target(name + '.testlist',
+			    build_by_default : true,
+			    command : [testexe, '--show-testlist'],
+			    capture : true,
+			    output : name + '.testlist')
+	endif
 endforeach
 
 if build_xe
@@ -405,11 +409,13 @@ if build_xe
 		test_list += prog
 		test_executables += testexe
 		name = prog.split('/').get(-1)
-		testlist_files += custom_target(name + '.testlist',
-			     build_by_default : true,
-			     command : [testexe, '--show-testlist'],
-			     capture : true,
-			     output : name + '.testlist')
+		if not meson.is_cross_build()
+			testlist_files += custom_target(name + '.testlist',
+				    build_by_default : true,
+				    command : [testexe, '--show-testlist'],
+				    capture : true,
+				    output : name + '.testlist')
+		endif
 	endforeach
 	build_info += 'Xe **experimental** tests enabled.'
 endif
@@ -435,11 +441,13 @@ if chamelium.found()
 		test_list += prog
 		test_executables += testexe
 		name = prog.split('/').get(-1)
-		testlist_files += custom_target(name + '.testlist',
-			     build_by_default : true,
-			     command : [testexe, '--show-testlist'],
-			     capture : true,
-			     output : name + '.testlist')
+		if not meson.is_cross_build()
+			testlist_files += custom_target(name + '.testlist',
+				    build_by_default : true,
+				    command : [testexe, '--show-testlist'],
+				    capture : true,
+				    output : name + '.testlist')
+		endif
 	endforeach
 	test_deps += chamelium
 
@@ -452,11 +460,13 @@ if chamelium.found()
 				install : true)
 	test_list += name
 	test_executables += testexe
-	testlist_files += custom_target(name + '.testlist',
-		     build_by_default : true,
-		     command : [testexe, '--show-testlist'],
-		     capture : true,
-		     output : name + '.testlist')
+	if not meson.is_cross_build()
+		testlist_files += custom_target(name + '.testlist',
+			    build_by_default : true,
+			    command : [testexe, '--show-testlist'],
+			    capture : true,
+			    output : name + '.testlist')
+	endif
 endif
 
 subdir('amdgpu')
@@ -468,11 +478,13 @@ subdir('vc4')
 subdir('vmwgfx')
 
 gen_testlist = find_program('generate_testlist.sh')
-test_list_target = custom_target('testlist',
-	      output : 'test-list.txt',
-	      command : [ gen_testlist, '@OUTPUT@', test_list ],
-	      install : true,
-	      install_dir : libexecdir)
+if not meson.is_cross_build()
+	test_list_target = custom_target('testlist',
+		    output : 'test-list.txt',
+		    command : [ gen_testlist, '@OUTPUT@', test_list ],
+		    install : true,
+		    install_dir : libexecdir)
+endif
 
 test_executables += executable('gem_concurrent_all', 'i915/gem_concurrent_all.c',
 	   dependencies : test_deps + [ libatomic ],
@@ -481,11 +493,13 @@ test_executables += executable('gem_concurrent_all', 'i915/gem_concurrent_all.c'
 	   install : true)
 test_list += 'gem_concurrent_all'
 
-test_list_full_target = custom_target('testlist-full',
-	      output : 'test-list-full.txt',
-	      command : [ gen_testlist, '@OUTPUT@', test_list ],
-	      install : true,
-	      install_dir : libexecdir)
+if not meson.is_cross_build()
+	test_list_full_target = custom_target('testlist-full',
+		    output : 'test-list-full.txt',
+		    command : [ gen_testlist, '@OUTPUT@', test_list ],
+		    install : true,
+		    install_dir : libexecdir)
+endif
 
 test_script = find_program('igt_command_line.sh')
 foreach prog : test_list
@@ -497,11 +511,13 @@ testexe = executable('gem_stress', 'i915/gem_stress.c',
 	   install_dir : libexecdir,
 	   install_rpath : libexecdir_rpathdir,
 	   dependencies : igt_deps)
-testlist_files += custom_target('gem_stress.testlist',
-                build_by_default : true,
-                command : [testexe, '--show-testlist'],
-                capture : true,
-                output : 'gem_stress.testlist')
+if not meson.is_cross_build()
+	testlist_files += custom_target('gem_stress.testlist',
+			build_by_default : true,
+			command : [testexe, '--show-testlist'],
+			capture : true,
+			output : 'gem_stress.testlist')
+endif
 
 image_files = [
   '1080p-left.png',

A message that is not in the archive (sent off-list or not yet received): CAAea8Y13=CguTipLJjJJt_pBvaiv92DViWJBZwvtjm7W-SU+vw@mail.gmail.com

#13 lore raw

Re: [igt-dev] [PATCH i-g-t v5 4/7] tests/meson.build: create testlists for tests

Quoted 17 lines · On Thu, 31 Aug 2023 18:24:05 -0700 Ilja Friedel <[email protected]> wrote:

Hi Mauro,

Quoted 11 lines · Mauro Carvalho Chehab

The testlist files are used for two purposes:

1. for documentation build;
2. for CI automation to run the tests.

While right now Intel CI doesn't depend on the produced testlists, this may change in the future. So, instead of making the testlist build dependent of testplan, the better seems to verify if the build is not a cross-compilation, e. g. with a patch similar to the enclosed one.

Quoted 4 lines

In my experience it is better to separate build phases from phases that use these binaries and execute them. It makes steps more modular and clearer where any failures come from. Having test lists sounds like a good idea and beneficial to other architectures.

My original approach was to do that, but I had some issues due to the lack of some features with the minimal meson version supported by IGT (and upgrading the version would also break gitlab pipelines).

Quoted 9 lines
Quoted 4 lines

Could you please check if this will address the issue? I don't have a cross-compilation environment handy to test it, so it would be easier if you could test it for me.

The enclosed patch "[PATCH i-g-t] tests/meson.build: only generate testlists
on native builds" works for our build system. If you want to stick with it, could you please land it in the upstream tree?

I sent the patch upstream too. Had to do a rebase today due to a conflict (that actually made the final patch simpler):

	https://patchwork.freedesktop.org/series/123104/

Could you please re-test and review or ack it? I'll merge it after getting your R-B or A-B.

Quoted 1 line

Otherwise I could try a different patch as well.

Sure! If you'd like to spin a different patch addressing it, go for it.

Regards,
Mauro

#14 lore raw

Re: [igt-dev] [PATCH i-g-t v5 4/7] tests/meson.build: create testlists for tests

Quoted 20 lines · On Fri, 1 Sep 2023 09:45:40 +0200 Mauro Carvalho Chehab…
Quoted 17 lines · On Thu, 31 Aug 2023 18:24:05 -0700 Ilja Friedel <[email protected]> wrote:

Hi Mauro,

Quoted 11 lines · Mauro Carvalho Chehab

The testlist files are used for two purposes:

1. for documentation build;
2. for CI automation to run the tests.

While right now Intel CI doesn't depend on the produced testlists, this may change in the future. So, instead of making the testlist build dependent of testplan, the better seems to verify if the build is not a cross-compilation, e. g. with a patch similar to the enclosed one.

Quoted 8 lines
Quoted 4 lines

In my experience it is better to separate build phases from phases that use these binaries and execute them. It makes steps more modular and clearer where any failures come from. Having test lists sounds like a good idea and beneficial to other architectures.

My original approach was to do that, but I had some issues due to the lack of some features with the minimal meson version supported by IGT (and upgrading the version would also break gitlab pipelines).

Btw, if you want to dig it deeper, the problem I faced is with regards to the name for the custom_target, e.g., on this code snippet:

foreach prog : test_progs
testexe = executable(prog, [prog + '.c'] + extra_sources.get(prog, []),
dependencies : test_deps + extra_dependencies.get(prog, []), install_dir : libexecdir,
install_rpath : libexecdir_rpathdir,
install : true)
test_executables += testexe
test_list += prog
name = prog.split('/').get(-1)
if not meson.is_cross_build()
testlist_files += custom_target(name + '.testlist',
build_by_default : true,
command : [testexe, '--show-testlist'], capture : true,
output : name + '.testlist')
endif
endforeach

the custom_target needs name + '.testlist'. Newer versions of Meson have a .name() function to get the name of the target built via executable[1]. So, a simple for at the end would do the work. Something like:

if not meson.is_cross_build()
foreach prog : test_executables
name = prog.name()
testlist_files += custom_target(name + '.testlist',
build_by_default : true, command : [testexe, '--show-testlist'], capture : true,
output : name + '.testlist')
endif
endif

But this would require setting meson minimal version to 0.54.

[1] https://mesonbuild.com/Reference-manual_returned_exe.html#build_tgtname

I was unable to find a way to do the same with version 0.48. One option would be to change minimal version to 0.54, but, as I said, this would require some changes at gitlab pipeline. No idea how to do that, nor I have access to change pipeline settings.

We could do it on a different way, by creating a list of names, but lists on Meson are constant and, on version 0.48, you can't append values to them (at least this failed on my tests).

Quoted 25 lines
Quoted 9 lines
Quoted 4 lines

Could you please check if this will address the issue? I don't have a cross-compilation environment handy to test it, so it would be easier if you could test it for me.

The enclosed patch "[PATCH i-g-t] tests/meson.build: only generate testlists
on native builds" works for our build system. If you want to stick with it, could you please land it in the upstream tree?

I sent the patch upstream too. Had to do a rebase today due to a conflict (that actually made the final patch simpler):

	https://patchwork.freedesktop.org/series/123104/

Could you please re-test and review or ack it? I'll merge it after getting your R-B or A-B.

Quoted 1 line

Otherwise I could try a different patch as well.

Sure! If you'd like to spin a different patch addressing it, go for it.

Regards,
Mauro

#15 lore raw

Re: [igt-dev] [PATCH i-g-t v5 4/7] tests/meson.build: create testlists for tests

In reply to Mauro Carvalho Chehab
Quoted 10 lines · On Fri, 1 Sep 2023 09:45:40 +0200 Mauro Carvalho Chehab…
Quoted 9 lines
Quoted 4 lines

Could you please check if this will address the issue? I don't have a cross-compilation environment handy to test it, so it would be easier if you could test it for me.

The enclosed patch "[PATCH i-g-t] tests/meson.build: only generate testlists
on native builds" works for our build system. If you want to stick with it, could you please land it in the upstream tree?

Quoted 7 lines

I sent the patch upstream too. Had to do a rebase today due to a conflict (that actually made the final patch simpler):

	https://patchwork.freedesktop.org/series/123104/

Could you please re-test and review or ack it? I'll merge it after getting your R-B or A-B.

As this is a compilation breakage affecting you, and I got already a reviewed-by for this patch, I'll go ahead and apply it. It should hopefully address your issue.

Still, if it doesn't solve and/or you have a better solution, feel free to send a followup patch.

Regards,
Mauro

A message that is not in the archive (sent off-list or not yet received): CAAea8Y2hX2=TjXmGJN=tFBSgFPqe8J5EgDCkoR7OMVy+J2t+cA@mail.gmail.com

#17 lore raw

Re: [igt-dev] [PATCH i-g-t v5 4/7] tests/meson.build: create testlists for tests

Quoted 8 lines · On Fri, 1 Sep 2023 16:08:22 -0700 Ilja Friedel <[email protected]> wrote:

Hi Mauro,

Quoted 3 lines · Mauro Carvalho Chehab

I sent the patch upstream too. Had to do a rebase today due to a conflict (that actually made the final patch simpler):

Quoted 7 lines
Quoted 4 lines
        https://patchwork.freedesktop.org/series/123104/

Could you please re-test and review or ack it? I'll merge it after getting your R-B or A-B.

The patch that you sent upstream works well for us. Thank you again!

Great! Thanks for testing it.

Regards,
Mauro

#18 lore raw

PATCH v5 5/7 scripts/test_list.py: speedup testlist check logic

In reply to Mauro Carvalho Chehab

From: Mauro Carvalho Chehab <[email protected]>

Now that the build system will generate the testlist for us, just read them when checking for missing symbols.

This should speed up a log the check logic.

After the change, touching on a single file and rebuilding the testplan with check enabled is a lot faster:

	$ touch tests/xe/xe_compute.c
	$ time make
	ninja -C build
	ninja: Entering directory `build'
	[10/10] Generating docs/testplan/i915_tests.html with a custom command
	real	0m4.510s
	user	0m5.944s
	sys	0m0.217s

This can be improved even further if we split the test_executables dependencies per driver.

---
 scripts/test_list.py | 30 ++++++------------------------
 1 file changed, 6 insertions(+), 24 deletions(-)
scripts/test_list.py +6 -24
index a55d2977c7c3..2c1a6f230fb5 100755
@@ -909,35 +909,17 @@ class TestList:
 
         return subtests
 
-    def __get_testlist(self, name):
-        match = re.match(r"(.*/)?(.*)\.c$", name)
-        if not match:
-            return []
-
-        basename = "igt@" + match.group(2)
-
-        fname = os.path.join(self.igt_build_path, "tests", match.group(2))
-        if not os.path.isfile(fname):
-            print(f"Error: file {fname} doesn't exist.")
-            sys.exit(1)
-        try:
-            result = subprocess.run([ fname, "--list-subtests" ],
-                                    check = True,
-                                    stdout = subprocess.PIPE,
-                                    universal_newlines=True)
-            subtests = result.stdout.splitlines()
-
-            return [basename  + "@" + i for i in subtests]
-        except subprocess.CalledProcessError:
-            # Handle it as a test using igt_simple_main
-            return [basename]
-
     def get_testlist(self):
 
         """ Return a list of tests as reported by --list-subtests """
         tests = []
         for name in self.filenames:
-            tests += self.__get_testlist(name)
+            fname = re.sub(r"\.c$", ".testlist", name.split('/')[-1])
+            fname = os.path.join(self.igt_build_path, "tests", fname)
+
+            with open(fname, 'r', encoding='utf8') as handle:
+                for line in handle:
+                    tests.append(line)
 
         return sorted(tests)
 
Signature · 1 line
2.40.1
#19 lore raw

Re: [igt-dev] [PATCH i-g-t v5 5/7] scripts/test_list.py: speedup testlist check logic

Hi Mauro,

Quoted 6 lines · Mauro Carvalho Chehab

From: Mauro Carvalho Chehab <[email protected]>

Now that the build system will generate the testlist for us, just read them when checking for missing symbols.

This should speed up a log the check logic.

s/a log//

Quoted 3 lines

After the change, touching on a single file and rebuilding the testplan with check enabled is a lot faster:

-------------------------------- ^^^^^
Please write a factor here which you measured, like: "4 times"

Quoted 28 lines
	$ touch tests/xe/xe_compute.c
	$ time make
	ninja -C build
	ninja: Entering directory `build'
	[10/10] Generating docs/testplan/i915_tests.html with a custom command
	real	0m4.510s
	user	0m5.944s
	sys	0m0.217s

This can be improved even further if we split the test_executables dependencies per driver.

---
 scripts/test_list.py | 30 ++++++------------------------
 1 file changed, 6 insertions(+), 24 deletions(-)
scripts/test_list.py +0 -1
index a55d2977c7c3..2c1a6f230fb5 100755
@@ -909,35 +909,17 @@ class TestList:
 
         return subtests
 
-    def __get_testlist(self, name):

scripts/test_list.py class TestList: · line 922

Quoted 10 lines
scripts/test_list.py +0 -10
-        match = re.match(r"(.*/)?(.*)\.c$", name)
-        if not match:
-            return []
-
-        basename = "igt@" + match.group(2)
-
-        fname = os.path.join(self.igt_build_path, "tests", match.group(2))
-        if not os.path.isfile(fname):
-            print(f"Error: file {fname} doesn't exist.")
-            sys.exit(1)

We miss this basic check now?

Regards,
Kamil

Quoted 30 lines
scripts/test_list.py +6 -13
-        try:
-            result = subprocess.run([ fname, "--list-subtests" ],
-                                    check = True,
-                                    stdout = subprocess.PIPE,
-                                    universal_newlines=True)
-            subtests = result.stdout.splitlines()
-
-            return [basename  + "@" + i for i in subtests]
-        except subprocess.CalledProcessError:
-            # Handle it as a test using igt_simple_main
-            return [basename]
-
     def get_testlist(self):
 
         """ Return a list of tests as reported by --list-subtests """
         tests = []
         for name in self.filenames:
-            tests += self.__get_testlist(name)
+            fname = re.sub(r"\.c$", ".testlist", name.split('/')[-1])
+            fname = os.path.join(self.igt_build_path, "tests", fname)
+
+            with open(fname, 'r', encoding='utf8') as handle:
+                for line in handle:
+                    tests.append(line)
 
         return sorted(tests)
 
Signature · 1 line
2.40.1
#20 lore raw

PATCH v5 6/7 tests/build: Generate and store an intel-ci.testlist

In reply to Mauro Carvalho Chehab

From: Mauro Carvalho Chehab <[email protected]>

Store a sorted testlist with tests that could be used to test the DRM core and the Intel drivers in a format that it would be expected by igt_runner.

---
 tests/intel-ci/meson.build | 8 ++++++++
 1 file changed, 8 insertions(+)
tests/intel-ci/meson.build +8 -0
index d5a6e4f47203..a1ec517f8da1 100644
@@ -9,4 +9,12 @@ intelci_files = [
   'xe.blocklist.txt',
 ]
 
+custom_target('intel-ci.testlist',
+              build_by_default : true,
+              command : ['sort', testlist_files],
+              install : true,
+              install_dir : datadir,
+              capture : true,
+              output : 'intel-ci.testlist')
+
 install_data(sources : intelci_files, install_dir : datadir)
Signature · 1 line
2.40.1
#21 lore raw

Re: [igt-dev] [PATCH i-g-t v5 6/7] tests/build: Generate and store an intel-ci.testlist

Hi Mauro,

Quoted 7 lines · Mauro Carvalho Chehab

From: Mauro Carvalho Chehab <[email protected]>

Store a sorted testlist with tests that could be used to test the DRM core and the Intel drivers in a format that it would be expected by igt_runner.

Looks good, I will add also Ewelina on Cc as it creates intel-ci.testlist

Regards,
Kamil

Quoted 24 lines
---
 tests/intel-ci/meson.build | 8 ++++++++
 1 file changed, 8 insertions(+)
tests/intel-ci/meson.build +8 -0
index d5a6e4f47203..a1ec517f8da1 100644
@@ -9,4 +9,12 @@ intelci_files = [
   'xe.blocklist.txt',
 ]
 
+custom_target('intel-ci.testlist',
+              build_by_default : true,
+              command : ['sort', testlist_files],
+              install : true,
+              install_dir : datadir,
+              capture : true,
+              output : 'intel-ci.testlist')
+
 install_data(sources : intelci_files, install_dir : datadir)
Signature · 1 line
2.40.1
#22 lore raw

PATCH v5 7/7 scripts/test_list.py: optimize check regex

In reply to Mauro Carvalho Chehab

From: Mauro Carvalho Chehab <[email protected]>

Running re.sub() for an already compiled regex makes it recompile again. Change the logic to use the right syntax. While here, also use rstrip() to remove \n at the end of read files.

Before:

	$ time ./scripts/igt_doc.py --config tests/i915/i915_*json --check --igt build/
	real	0m1.492s
	user	0m1.457s
	sys	0m0.030s

After:

	$ time ./scripts/igt_doc.py --config tests/i915/i915_*json --check --igt build/
	real	0m0.492s
	user	0m0.473s
	sys	0m0.017s

It is now 3 times faster (measured for i915 driver, which has more IGT tests).

---
 scripts/test_list.py | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)
scripts/test_list.py +12 -10
index 2c1a6f230fb5..19ed5e5467f5 100755
@@ -401,10 +401,10 @@ class TestList:
 
         for filter_field, regex in self.filters.items():
             if filter_field in subtest:
-                if not re.match(regex, subtest[filter_field]):
+                if not regex.match(subtest[filter_field]):
                     return True
             elif filter_field in test:
-                if not re.match(regex, test[filter_field]):
+                if not regex.match(test[filter_field]):
                     return True
             else:
                 return field_not_found_value
@@ -919,7 +919,7 @@ class TestList:
 
             with open(fname, 'r', encoding='utf8') as handle:
                 for line in handle:
-                    tests.append(line)
+                    tests.append(line.rstrip("\n"))
 
         return sorted(tests)
 
@@ -938,9 +938,11 @@ class TestList:
 
         doc_subtests = set()
 
+        args_regex = re.compile(r'\<[^\>]+\>')
+
         for subtest in self.get_subtests()[""]:
             subtest = "@".join(subtest.split("@")[:3])
-            subtest = re.sub(r'\<[^\>]+\>', r'\\d+', subtest)
+            subtest = args_regex.sub(r'\\d+', subtest)
             doc_subtests.add(subtest)
 
         doc_subtests = list(sorted(doc_subtests))
@@ -957,14 +959,14 @@ class TestList:
         for doc_test in doc_subtests:
             if test_regex != r"":
                 test_regex += r"|"
-            test_regex += r'^' + doc_test + r'$'
+            test_regex += doc_test
 
-        test_regex = re.compile(test_regex)
+        test_regex = re.compile(r'^(' + test_regex + r')$')
 
         for doc_test in doc_subtests:
             found = False
             for run_test in run_subtests:
-                if re.match(test_regex, run_test):
+                if test_regex.match(run_test):
                     found = True
                     break
             if not found:
@@ -972,7 +974,7 @@ class TestList:
 
         for run_test in run_subtests:
             found = False
-            if re.match(test_regex, run_test):
+            if test_regex.match(run_test):
                 found = True
             if not found:
                 run_missing.append(run_test)
@@ -1101,7 +1103,7 @@ class TestList:
                     continue
 
                 # It is a known section. Parse its contents
-                match = re.match(field_re, file_line)
+                match = field_re.match(file_line)
                 if match:
                     current_field = self.field_list[match.group(1).lower()]
                     match_val = match.group(2)
@@ -1198,7 +1200,7 @@ class TestList:
                             self.doc[current_test]["arg"][arg_ref][cur_arg][cur_arg_element] += match_val
                     continue
 
-                re.sub(r"\n$","", file_line)
+                file_line.rstrip(r"\n")
                 sys.exit(f"{fname}:{file_ln + 1}: Error: unrecognized line. Need to add field at %s?\n\t==> %s" %
                          (self.config_fname, file_line))
 
Signature · 1 line
2.40.1
Reviewed-by on v5 7/7
#23 lore raw

Re: [igt-dev] [PATCH i-g-t v5 7/7] scripts/test_list.py: optimize check regex

Hi Mauro,

Quoted 17 lines · Mauro Carvalho Chehab

From: Mauro Carvalho Chehab <[email protected]>

Running re.sub() for an already compiled regex makes it recompile again. Change the logic to use the right syntax. While here, also use rstrip() to remove \n at the end of read files.

Before:

	$ time ./scripts/igt_doc.py --config tests/i915/i915_*json --check --igt build/
	real	0m1.492s
	user	0m1.457s
	sys	0m0.030s

After:

	$ time ./scripts/igt_doc.py --config tests/i915/i915_*json --check --igt build/
Quoted 8 lines
	real	0m0.492s
	user	0m0.473s
	sys	0m0.017s

It is now 3 times faster (measured for i915 driver, which has more IGT tests).

Quoted 91 lines
---
 scripts/test_list.py | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)
scripts/test_list.py +12 -10
index 2c1a6f230fb5..19ed5e5467f5 100755
@@ -401,10 +401,10 @@ class TestList:
 
         for filter_field, regex in self.filters.items():
             if filter_field in subtest:
-                if not re.match(regex, subtest[filter_field]):
+                if not regex.match(subtest[filter_field]):
                     return True
             elif filter_field in test:
-                if not re.match(regex, test[filter_field]):
+                if not regex.match(test[filter_field]):
                     return True
             else:
                 return field_not_found_value
@@ -919,7 +919,7 @@ class TestList:
 
             with open(fname, 'r', encoding='utf8') as handle:
                 for line in handle:
-                    tests.append(line)
+                    tests.append(line.rstrip("\n"))
 
         return sorted(tests)
 
@@ -938,9 +938,11 @@ class TestList:
 
         doc_subtests = set()
 
+        args_regex = re.compile(r'\<[^\>]+\>')
+
         for subtest in self.get_subtests()[""]:
             subtest = "@".join(subtest.split("@")[:3])
-            subtest = re.sub(r'\<[^\>]+\>', r'\\d+', subtest)
+            subtest = args_regex.sub(r'\\d+', subtest)
             doc_subtests.add(subtest)
 
         doc_subtests = list(sorted(doc_subtests))
@@ -957,14 +959,14 @@ class TestList:
         for doc_test in doc_subtests:
             if test_regex != r"":
                 test_regex += r"|"
-            test_regex += r'^' + doc_test + r'$'
+            test_regex += doc_test
 
-        test_regex = re.compile(test_regex)
+        test_regex = re.compile(r'^(' + test_regex + r')$')
 
         for doc_test in doc_subtests:
             found = False
             for run_test in run_subtests:
-                if re.match(test_regex, run_test):
+                if test_regex.match(run_test):
                     found = True
                     break
             if not found:
@@ -972,7 +974,7 @@ class TestList:
 
         for run_test in run_subtests:
             found = False
-            if re.match(test_regex, run_test):
+            if test_regex.match(run_test):
                 found = True
             if not found:
                 run_missing.append(run_test)
@@ -1101,7 +1103,7 @@ class TestList:
                     continue
 
                 # It is a known section. Parse its contents
-                match = re.match(field_re, file_line)
+                match = field_re.match(file_line)
                 if match:
                     current_field = self.field_list[match.group(1).lower()]
                     match_val = match.group(2)
@@ -1198,7 +1200,7 @@ class TestList:
                             self.doc[current_test]["arg"][arg_ref][cur_arg][cur_arg_element] += match_val
                     continue
 
-                re.sub(r"\n$","", file_line)
+                file_line.rstrip(r"\n")
                 sys.exit(f"{fname}:{file_ln + 1}: Error: unrecognized line. Need to add field at %s?\n\t==> %s" %
                          (self.config_fname, file_line))
 
Signature · 1 line
2.40.1
#24 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for Speedup IGT build time

In reply to Mauro Carvalho Chehab
== Series Details ==

== Series Details ==

Series: Speedup IGT build time
URL : https://patchwork.freedesktop.org/series/120459/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_13364 -> IGTPW_9376
====================================================

Summary
-------

**WARNING**

Minor unknown changes coming with IGTPW_9376 need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in IGTPW_9376, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/index.html

Participating hosts (41 -> 40)
------------------------------

Missing (1): fi-snb-2520m

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_9376:

### IGT changes ###

#### Warnings ####

* igt@i915_pm_rpm@basic-pci-d3-state:
- fi-cfl-guc: [FAIL][1] ([i915#7940]) -> [FAIL][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/fi-cfl-guc/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/fi-cfl-guc/igt@[email protected]

Known issues
------------

Here are the changes found in IGTPW_9376 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@debugfs_test@basic-hwmon:
- bat-adlp-11: NOTRUN -> [SKIP][3] ([i915#7456])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/bat-adlp-11/igt@[email protected]

* igt@gem_tiled_pread_basic:
- bat-adlp-11: NOTRUN -> [SKIP][4] ([i915#3282])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/bat-adlp-11/igt@gem_tiled_pread_basic.html

* igt@i915_pm_rpm@module-reload:
- fi-cfl-8700k: [PASS][5] -> [FAIL][6] ([i915#7940])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/fi-cfl-8700k/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/fi-cfl-8700k/igt@[email protected]

* igt@i915_selftest@live@gt_lrc:
- bat-dg2-11: [PASS][7] -> [INCOMPLETE][8] ([i915#7609] / [i915#7913])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/bat-dg2-11/igt@i915_selftest@live@gt_lrc.html
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/bat-dg2-11/igt@i915_selftest@live@gt_lrc.html

* igt@i915_selftest@live@migrate:
- bat-mtlp-8: [PASS][9] -> [DMESG-FAIL][10] ([i915#7699])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/bat-mtlp-8/igt@i915_selftest@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/bat-mtlp-8/igt@i915_selftest@[email protected]

* igt@i915_selftest@live@reset:
- bat-rpls-1: [PASS][11] -> [ABORT][12] ([i915#4983] / [i915#7461] / [i915#8347] / [i915#8384])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/bat-rpls-1/igt@i915_selftest@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/bat-rpls-1/igt@i915_selftest@[email protected]

* igt@i915_selftest@live@slpc:
- bat-rpls-2: NOTRUN -> [DMESG-WARN][13] ([i915#6367])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/bat-rpls-2/igt@i915_selftest@[email protected]

* igt@kms_chamelium_frames@hdmi-crc-fast:
- bat-adlp-11: NOTRUN -> [SKIP][14] ([i915#7828]) +7 similar issues
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/bat-adlp-11/igt@[email protected]

* igt@kms_chamelium_hpd@common-hpd-after-suspend:
- bat-rpls-2: NOTRUN -> [SKIP][15] ([i915#7828])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/bat-rpls-2/igt@[email protected]

* igt@kms_cursor_legacy@basic-busy-flip-before-cursor-legacy:
- bat-adlp-11: NOTRUN -> [SKIP][16] ([i915#4103]) +1 similar issue
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/bat-adlp-11/igt@[email protected]

* igt@kms_cursor_legacy@basic-flip-before-cursor-varying-size:
- bat-adlp-11: NOTRUN -> [ABORT][17] ([i915#4423])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/bat-adlp-11/igt@[email protected]

* igt@kms_pipe_crc_basic@suspend-read-crc:
- bat-rpls-2: NOTRUN -> [SKIP][18] ([i915#1845])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/bat-rpls-2/igt@[email protected]

* igt@kms_psr@primary_page_flip:
- bat-rplp-1: NOTRUN -> [SKIP][19] ([i915#1072]) +3 similar issues
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/bat-rplp-1/igt@kms_psr@primary_page_flip.html

* igt@kms_setmode@basic-clone-single-crtc:
- bat-rplp-1: NOTRUN -> [ABORT][20] ([i915#8260] / [i915#8668])
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/bat-rplp-1/igt@[email protected]

#### Possible fixes ####

* igt@core_auth@basic-auth:
- bat-adlp-11: [ABORT][21] ([i915#8011]) -> [PASS][22]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/bat-adlp-11/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/bat-adlp-11/igt@[email protected]

* igt@i915_module_load@load:
- bat-adlp-11: [DMESG-WARN][23] ([i915#4423]) -> [PASS][24]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/bat-adlp-11/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/bat-adlp-11/igt@[email protected]

* igt@i915_pm_rpm@basic-pci-d3-state:
- fi-kbl-x1275: [SKIP][25] ([fdo#109271]) -> [PASS][26]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/fi-kbl-x1275/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/fi-kbl-x1275/igt@[email protected]

* igt@i915_pm_rpm@basic-rte:
- fi-cfl-8700k: [FAIL][27] ([i915#7940]) -> [PASS][28]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/fi-cfl-8700k/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/fi-cfl-8700k/igt@[email protected]

* igt@i915_selftest@live@requests:
- bat-mtlp-8: [DMESG-FAIL][29] ([i915#7269]) -> [PASS][30]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/bat-mtlp-8/igt@i915_selftest@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/bat-mtlp-8/igt@i915_selftest@[email protected]

* igt@i915_selftest@live@reset:
- bat-rpls-2: [ABORT][31] ([i915#4983] / [i915#7461] / [i915#7913] / [i915#8347]) -> [PASS][32]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/bat-rpls-2/igt@i915_selftest@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/bat-rpls-2/igt@i915_selftest@[email protected]

* igt@kms_pipe_crc_basic@read-crc-frame-sequence@pipe-d-edp-1:
- bat-rplp-1: [ABORT][33] ([i915#8442] / [i915#8668]) -> [PASS][34]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/bat-rplp-1/igt@kms_pipe_crc_basic@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/bat-rplp-1/igt@kms_pipe_crc_basic@[email protected]

[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[i915#1072]: https://gitlab.freedesktop.org/drm/intel/issues/1072
[i915#1845]: https://gitlab.freedesktop.org/drm/intel/issues/1845
[i915#3282]: https://gitlab.freedesktop.org/drm/intel/issues/3282
[i915#4103]: https://gitlab.freedesktop.org/drm/intel/issues/4103
[i915#4423]: https://gitlab.freedesktop.org/drm/intel/issues/4423
[i915#4983]: https://gitlab.freedesktop.org/drm/intel/issues/4983
[i915#6367]: https://gitlab.freedesktop.org/drm/intel/issues/6367
[i915#7269]: https://gitlab.freedesktop.org/drm/intel/issues/7269
[i915#7456]: https://gitlab.freedesktop.org/drm/intel/issues/7456
[i915#7461]: https://gitlab.freedesktop.org/drm/intel/issues/7461
[i915#7609]: https://gitlab.freedesktop.org/drm/intel/issues/7609
[i915#7699]: https://gitlab.freedesktop.org/drm/intel/issues/7699
[i915#7828]: https://gitlab.freedesktop.org/drm/intel/issues/7828
[i915#7913]: https://gitlab.freedesktop.org/drm/intel/issues/7913
[i915#7940]: https://gitlab.freedesktop.org/drm/intel/issues/7940
[i915#8011]: https://gitlab.freedesktop.org/drm/intel/issues/8011
[i915#8260]: https://gitlab.freedesktop.org/drm/intel/issues/8260
[i915#8347]: https://gitlab.freedesktop.org/drm/intel/issues/8347
[i915#8384]: https://gitlab.freedesktop.org/drm/intel/issues/8384
[i915#8442]: https://gitlab.freedesktop.org/drm/intel/issues/8442
[i915#8668]: https://gitlab.freedesktop.org/drm/intel/issues/8668

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_7377 -> IGTPW_9376

CI-20190529: 20190529
CI_DRM_13364: 91010bd5ed0a15e689f0fcc3817489bd02433884 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_9376: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/index.html
IGT_7377: d1574543ba4bb322597345530053475c07be0eb9 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/index.html

#26 lore raw

[igt-dev] ✗ Fi.CI.IGT: failure for Speedup IGT build time

In reply to Mauro Carvalho Chehab
== Series Details ==

== Series Details ==

Series: Speedup IGT build time
URL : https://patchwork.freedesktop.org/series/120459/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_13364_full -> IGTPW_9376_full
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with IGTPW_9376_full absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in IGTPW_9376_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/index.html

Participating hosts (10 -> 9)
------------------------------

Missing (1): pig-kbl-iris

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_9376_full:

### IGT changes ###

#### Possible regressions ####

* igt@kms_fb_coherency@memset-crc@mmap-offset-wc:
- shard-mtlp: [PASS][1] -> [FAIL][2] +1 similar issue
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-3/igt@kms_fb_coherency@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-6/igt@kms_fb_coherency@[email protected]

* igt@kms_flip@absolute-wf_vblank-interruptible@a-vga1:
- shard-snb: [PASS][3] -> [ABORT][4]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-snb6/igt@kms_flip@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-snb4/igt@kms_flip@[email protected]

Known issues
------------

Here are the changes found in IGTPW_9376_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@drm_fdinfo@busy@ccs0:
- shard-dg2: NOTRUN -> [SKIP][5] ([i915#8414]) +9 similar issues
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-7/igt@drm_fdinfo@[email protected]

* igt@drm_fdinfo@virtual-busy-all:
- shard-mtlp: NOTRUN -> [SKIP][6] ([i915#8414])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-1/igt@[email protected]

* igt@drm_fdinfo@virtual-idle:
- shard-rkl: [PASS][7] -> [FAIL][8] ([i915#7742]) +1 similar issue
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-rkl-4/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-1/igt@[email protected]

* igt@feature_discovery@psr2:
- shard-dg2: NOTRUN -> [SKIP][9] ([i915#658]) +1 similar issue
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-2/igt@[email protected]
- shard-rkl: NOTRUN -> [SKIP][10] ([i915#658])
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-1/igt@[email protected]

* igt@gem_bad_reloc@negative-reloc-bltcopy:
- shard-mtlp: NOTRUN -> [SKIP][11] ([i915#3281]) +1 similar issue
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-2/igt@[email protected]

* igt@gem_barrier_race@remote-request@rcs0:
- shard-glk: [PASS][12] -> [ABORT][13] ([i915#7461] / [i915#8211])
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-glk6/igt@gem_barrier_race@[email protected]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-glk4/igt@gem_barrier_race@[email protected]

* igt@gem_ccs@block-copy-compressed:
- shard-mtlp: NOTRUN -> [SKIP][14] ([i915#5325])
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-3/igt@[email protected]

* igt@gem_ctx_exec@basic-nohangcheck:
- shard-tglu: [PASS][15] -> [FAIL][16] ([i915#6268])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-tglu-8/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-6/igt@[email protected]

* igt@gem_ctx_isolation@preservation-s3@rcs0:
- shard-snb: NOTRUN -> [DMESG-WARN][17] ([i915#8841]) +4 similar issues
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-snb4/igt@gem_ctx_isolation@[email protected]

* igt@gem_ctx_param@set-priority-not-supported:
- shard-mtlp: NOTRUN -> [SKIP][18] ([fdo#109314])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-8/igt@[email protected]

* igt@gem_ctx_persistence@heartbeat-close:
- shard-mtlp: NOTRUN -> [SKIP][19] ([i915#8555])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-3/igt@[email protected]

* igt@gem_ctx_persistence@heartbeat-hostile:
- shard-dg2: NOTRUN -> [SKIP][20] ([i915#8555]) +1 similar issue
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-7/igt@[email protected]

* igt@gem_ctx_persistence@hostile:
- shard-snb: NOTRUN -> [SKIP][21] ([fdo#109271] / [i915#1099])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-snb6/igt@[email protected]

* igt@gem_ctx_sseu@invalid-sseu:
- shard-tglu: NOTRUN -> [SKIP][22] ([i915#280])
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-5/igt@[email protected]

* igt@gem_eio@in-flight-contexts-immediate:
- shard-mtlp: [PASS][23] -> [ABORT][24] ([i915#8503])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-1/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-3/igt@[email protected]

* igt@gem_exec_balancer@hog:
- shard-mtlp: NOTRUN -> [SKIP][25] ([i915#4812])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-6/igt@[email protected]

* igt@gem_exec_balancer@parallel-bb-first:
- shard-rkl: NOTRUN -> [SKIP][26] ([i915#4525])
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-6/igt@[email protected]

* igt@gem_exec_capture@capture-invisible@smem0:
- shard-mtlp: NOTRUN -> [SKIP][27] ([i915#6334])
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-1/igt@gem_exec_capture@[email protected]

* igt@gem_exec_fair@basic-none-rrul:
- shard-dg2: NOTRUN -> [SKIP][28] ([i915#3539] / [i915#4852])
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-1/igt@[email protected]

* igt@gem_exec_fair@basic-pace-share@rcs0:
- shard-glk: [PASS][29] -> [FAIL][30] ([i915#2842]) +3 similar issues
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-glk2/igt@gem_exec_fair@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-glk2/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-throttle@rcs0:
- shard-rkl: [PASS][31] -> [FAIL][32] ([i915#2842]) +2 similar issues
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-rkl-2/igt@gem_exec_fair@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-7/igt@gem_exec_fair@[email protected]
- shard-tglu: NOTRUN -> [FAIL][33] ([i915#2842])
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-4/igt@gem_exec_fair@[email protected]

* igt@gem_exec_gttfill@multigpu-basic:
- shard-mtlp: NOTRUN -> [SKIP][34] ([i915#7697])
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-5/igt@[email protected]

* igt@gem_exec_params@secure-non-root:
- shard-dg2: NOTRUN -> [SKIP][35] ([fdo#112283])
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-10/igt@[email protected]
- shard-rkl: NOTRUN -> [SKIP][36] ([fdo#112283])
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-6/igt@[email protected]

* igt@gem_exec_reloc@basic-cpu-wc-active:
- shard-dg2: NOTRUN -> [SKIP][37] ([i915#3281])
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-1/igt@[email protected]
- shard-rkl: NOTRUN -> [SKIP][38] ([i915#3281])
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-2/igt@[email protected]

* igt@gem_exec_suspend@basic-s4-devices@smem:
- shard-rkl: NOTRUN -> [ABORT][39] ([i915#7975] / [i915#8213])
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-2/igt@gem_exec_suspend@[email protected]

* igt@gem_exec_whisper@basic-fds-all:
- shard-mtlp: [PASS][40] -> [FAIL][41] ([i915#6363]) +1 similar issue
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-6/igt@[email protected]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-4/igt@[email protected]

* igt@gem_fenced_exec_thrash@no-spare-fences-busy-interruptible:
- shard-mtlp: NOTRUN -> [SKIP][42] ([i915#4860])
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-1/igt@[email protected]

* igt@gem_lmem_evict@dontneed-evict-race:
- shard-rkl: NOTRUN -> [SKIP][43] ([i915#4613] / [i915#7582])
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-1/igt@[email protected]

* igt@gem_lmem_swapping@verify-random:
- shard-rkl: NOTRUN -> [SKIP][44] ([i915#4613])
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-7/igt@[email protected]
- shard-mtlp: NOTRUN -> [SKIP][45] ([i915#4613])
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-1/igt@[email protected]

* igt@gem_mmap@short-mmap:
- shard-mtlp: NOTRUN -> [SKIP][46] ([i915#4083])
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-1/igt@[email protected]

* igt@gem_mmap_gtt@basic-read-write-distinct:
- shard-dg2: NOTRUN -> [SKIP][47] ([i915#4077]) +1 similar issue
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-6/igt@[email protected]

* igt@gem_mmap_gtt@basic-short:
- shard-mtlp: NOTRUN -> [SKIP][48] ([i915#4077]) +6 similar issues
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-3/igt@[email protected]

* igt@gem_mmap_gtt@big-bo-tiledy:
- shard-tglu: [PASS][49] -> [INCOMPLETE][50] ([i915#2295])
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-tglu-8/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-8/igt@[email protected]

* igt@gem_partial_pwrite_pread@writes-after-reads:
- shard-rkl: NOTRUN -> [SKIP][51] ([i915#3282]) +3 similar issues
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-4/igt@[email protected]

* igt@gem_pwrite@basic-random:
- shard-dg2: NOTRUN -> [SKIP][52] ([i915#3282]) +5 similar issues
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-7/igt@[email protected]
- shard-mtlp: NOTRUN -> [SKIP][53] ([i915#3282]) +3 similar issues
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-8/igt@[email protected]

* igt@gem_pxp@regular-baseline-src-copy-readible:
- shard-dg2: NOTRUN -> [SKIP][54] ([i915#4270])
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-7/igt@[email protected]

* igt@gem_pxp@verify-pxp-key-change-after-suspend-resume:
- shard-tglu: NOTRUN -> [SKIP][55] ([i915#4270])
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-8/igt@[email protected]

* igt@gem_render_copy@yf-tiled-to-vebox-x-tiled:
- shard-mtlp: NOTRUN -> [SKIP][56] ([i915#8428])
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-1/igt@[email protected]

* igt@gem_render_copy@yf-tiled-to-vebox-yf-tiled:
- shard-dg2: NOTRUN -> [SKIP][57] ([i915#5190]) +1 similar issue
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-7/igt@[email protected]

* igt@gem_set_tiling_vs_blt@tiled-to-untiled:
- shard-dg2: NOTRUN -> [SKIP][58] ([i915#4079])
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-11/igt@[email protected]
- shard-rkl: NOTRUN -> [SKIP][59] ([i915#8411])
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-7/igt@[email protected]

* igt@gem_set_tiling_vs_blt@untiled-to-tiled:
- shard-mtlp: NOTRUN -> [SKIP][60] ([i915#4079])
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-1/igt@[email protected]

* igt@gem_userptr_blits@invalid-mmap-offset-unsync:
- shard-tglu: NOTRUN -> [SKIP][61] ([i915#3297]) +1 similar issue
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-6/igt@[email protected]

* igt@gen3_mixed_blits:
- shard-dg2: NOTRUN -> [SKIP][62] ([fdo#109289])
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-6/igt@gen3_mixed_blits.html
- shard-rkl: NOTRUN -> [SKIP][63] ([fdo#109289])
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-1/igt@gen3_mixed_blits.html

* igt@gen9_exec_parse@allowed-single:
- shard-tglu: NOTRUN -> [SKIP][64] ([i915#2527] / [i915#2856]) +2 similar issues
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-2/igt@[email protected]

* igt@i915_module_load@load:
- shard-snb: NOTRUN -> [SKIP][65] ([fdo#109271] / [i915#6227])
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-snb4/igt@[email protected]
- shard-tglu: NOTRUN -> [SKIP][66] ([i915#6227])
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-5/igt@[email protected]

* igt@i915_module_load@resize-bar:
- shard-rkl: NOTRUN -> [SKIP][67] ([i915#6412])
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-1/igt@[email protected]
- shard-mtlp: NOTRUN -> [SKIP][68] ([i915#6412])
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-3/igt@[email protected]

* igt@i915_pm_lpsp@kms-lpsp@kms-lpsp-dp:
- shard-dg2: NOTRUN -> [SKIP][69] ([i915#1937])
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-11/igt@i915_pm_lpsp@[email protected]

* igt@i915_pm_rpm@dpms-lpsp:
- shard-dg2: [PASS][70] -> [SKIP][71] ([i915#1397])
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-dg2-12/igt@[email protected]
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-1/igt@[email protected]

* igt@i915_pm_rpm@dpms-non-lpsp:
- shard-rkl: [PASS][72] -> [SKIP][73] ([i915#1397]) +2 similar issues
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-rkl-2/igt@[email protected]
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-7/igt@[email protected]

* igt@i915_pm_rpm@gem-execbuf-stress@smem0:
- shard-tglu: [PASS][74] -> [FAIL][75] ([i915#7940]) +2 similar issues
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-tglu-3/igt@i915_pm_rpm@[email protected]
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-5/igt@i915_pm_rpm@[email protected]

* igt@i915_pm_rpm@gem-mmap-type@gtt-smem0:
- shard-mtlp: NOTRUN -> [SKIP][76] ([i915#8431])
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-2/igt@i915_pm_rpm@[email protected]

* igt@i915_pm_rpm@modeset-pc8-residency-stress:
- shard-dg2: NOTRUN -> [SKIP][77] ([fdo#109506])
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-6/igt@[email protected]

* igt@i915_selftest@live@migrate:
- shard-mtlp: [PASS][78] -> [DMESG-FAIL][79] ([i915#7699])
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-3/igt@i915_selftest@[email protected]
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-2/igt@i915_selftest@[email protected]

* igt@i915_selftest@live@slpc:
- shard-mtlp: [PASS][80] -> [DMESG-WARN][81] ([i915#6367])
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-3/igt@i915_selftest@[email protected]
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-2/igt@i915_selftest@[email protected]

* igt@i915_suspend@basic-s3-without-i915:
- shard-rkl: [PASS][82] -> [FAIL][83] ([fdo#103375])
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-rkl-4/igt@[email protected]
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-6/igt@[email protected]

* igt@kms_async_flips@crc@pipe-a-hdmi-a-2:
- shard-rkl: NOTRUN -> [FAIL][84] ([i915#8247]) +1 similar issue
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-1/igt@kms_async_flips@[email protected]

* igt@kms_async_flips@invalid-async-flip:
- shard-mtlp: NOTRUN -> [SKIP][85] ([i915#6228])
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-1/igt@[email protected]

* igt@kms_atomic@plane-primary-overlay-mutable-zpos:
- shard-mtlp: NOTRUN -> [SKIP][86] ([i915#404])
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-2/igt@[email protected]

* igt@kms_atomic_transition@plane-all-modeset-transition-internal-panels:
- shard-snb: NOTRUN -> [SKIP][87] ([fdo#109271] / [i915#1769])
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-snb4/igt@kms_atomic_transition@plane-all-modeset-transition-internal-panels.html

* igt@kms_big_fb@4-tiled-32bpp-rotate-90:
- shard-mtlp: NOTRUN -> [SKIP][88] ([fdo#111614])
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-3/igt@[email protected]

* igt@kms_big_fb@4-tiled-addfb-size-overflow:
- shard-tglu: NOTRUN -> [SKIP][89] ([i915#5286])
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-2/igt@[email protected]

* igt@kms_big_fb@4-tiled-max-hw-stride-32bpp-rotate-0-hflip:
- shard-rkl: NOTRUN -> [SKIP][90] ([i915#5286])
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-1/igt@[email protected]

* igt@kms_big_fb@4-tiled-max-hw-stride-64bpp-rotate-0-hflip:
- shard-mtlp: [PASS][91] -> [FAIL][92] ([i915#5138])
[91]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-6/igt@[email protected]
[92]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-8/igt@[email protected]

* igt@kms_big_fb@x-tiled-16bpp-rotate-90:
- shard-dg2: NOTRUN -> [SKIP][93] ([fdo#111614]) +2 similar issues
[93]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-5/igt@[email protected]

* igt@kms_big_fb@x-tiled-max-hw-stride-64bpp-rotate-180-async-flip:
- shard-mtlp: [PASS][94] -> [FAIL][95] ([i915#3743])
[94]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-3/igt@kms_big_fb@x-tiled-max-hw-stride-64bpp-rotate-180-async-flip.html
[95]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-6/igt@kms_big_fb@x-tiled-max-hw-stride-64bpp-rotate-180-async-flip.html

* igt@kms_big_fb@y-tiled-64bpp-rotate-270:
- shard-rkl: NOTRUN -> [SKIP][96] ([fdo#111614] / [i915#3638]) +1 similar issue
[96]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-7/igt@[email protected]

* igt@kms_big_fb@y-tiled-max-hw-stride-64bpp-rotate-180-hflip-async-flip:
- shard-mtlp: NOTRUN -> [SKIP][97] ([fdo#111615]) +5 similar issues
[97]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-6/igt@kms_big_fb@y-tiled-max-hw-stride-64bpp-rotate-180-hflip-async-flip.html

* igt@kms_big_fb@yf-tiled-16bpp-rotate-0:
- shard-dg2: NOTRUN -> [SKIP][98] ([i915#4538] / [i915#5190]) +2 similar issues
[98]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-6/igt@[email protected]
- shard-rkl: NOTRUN -> [SKIP][99] ([fdo#110723]) +1 similar issue
[99]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-6/igt@[email protected]

* igt@kms_big_fb@yf-tiled-64bpp-rotate-90:
- shard-tglu: NOTRUN -> [SKIP][100] ([fdo#111615]) +2 similar issues
[100]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-10/igt@[email protected]

* igt@kms_ccs@pipe-a-bad-rotation-90-y_tiled_ccs:
- shard-rkl: NOTRUN -> [SKIP][101] ([i915#3734] / [i915#5354] / [i915#6095]) +1 similar issue
[101]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-2/igt@kms_ccs@pipe-a-bad-rotation-90-y_tiled_ccs.html

* igt@kms_ccs@pipe-a-crc-sprite-planes-basic-4_tiled_dg2_mc_ccs:
- shard-mtlp: NOTRUN -> [SKIP][102] ([i915#6095]) +13 similar issues
[102]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-7/igt@kms_ccs@pipe-a-crc-sprite-planes-basic-4_tiled_dg2_mc_ccs.html

* igt@kms_ccs@pipe-a-crc-sprite-planes-basic-4_tiled_mtl_rc_ccs_cc:
- shard-dg2: NOTRUN -> [SKIP][103] ([i915#5354]) +21 similar issues
[103]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-8/igt@kms_ccs@pipe-a-crc-sprite-planes-basic-4_tiled_mtl_rc_ccs_cc.html

* igt@kms_ccs@pipe-a-missing-ccs-buffer-y_tiled_gen12_mc_ccs:
- shard-tglu: NOTRUN -> [SKIP][104] ([i915#3689] / [i915#3886] / [i915#5354] / [i915#6095]) +1 similar issue
[104]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-6/igt@kms_ccs@pipe-a-missing-ccs-buffer-y_tiled_gen12_mc_ccs.html

* igt@kms_ccs@pipe-b-bad-pixel-format-4_tiled_mtl_rc_ccs:
- shard-tglu: NOTRUN -> [SKIP][105] ([i915#5354] / [i915#6095]) +2 similar issues
[105]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-3/igt@kms_ccs@pipe-b-bad-pixel-format-4_tiled_mtl_rc_ccs.html

* igt@kms_ccs@pipe-b-ccs-on-another-bo-y_tiled_gen12_rc_ccs_cc:
- shard-dg2: NOTRUN -> [SKIP][106] ([i915#3689] / [i915#3886] / [i915#5354])
[106]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-2/igt@kms_ccs@pipe-b-ccs-on-another-bo-y_tiled_gen12_rc_ccs_cc.html

* igt@kms_ccs@pipe-b-crc-primary-rotation-180-4_tiled_dg2_rc_ccs_cc:
- shard-rkl: NOTRUN -> [SKIP][107] ([i915#5354] / [i915#6095]) +4 similar issues
[107]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-6/igt@kms_ccs@pipe-b-crc-primary-rotation-180-4_tiled_dg2_rc_ccs_cc.html

* igt@kms_ccs@pipe-b-random-ccs-data-4_tiled_dg2_mc_ccs:
- shard-tglu: NOTRUN -> [SKIP][108] ([i915#3689] / [i915#5354] / [i915#6095]) +4 similar issues
[108]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-4/igt@kms_ccs@pipe-b-random-ccs-data-4_tiled_dg2_mc_ccs.html

* igt@kms_ccs@pipe-c-ccs-on-another-bo-y_tiled_gen12_rc_ccs_cc:
- shard-mtlp: NOTRUN -> [SKIP][109] ([i915#3886] / [i915#6095]) +1 similar issue
[109]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-1/igt@kms_ccs@pipe-c-ccs-on-another-bo-y_tiled_gen12_rc_ccs_cc.html

* igt@kms_ccs@pipe-d-bad-aux-stride-y_tiled_gen12_rc_ccs_cc:
- shard-dg2: NOTRUN -> [SKIP][110] ([i915#3689] / [i915#5354]) +4 similar issues
[110]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-1/igt@kms_ccs@pipe-d-bad-aux-stride-y_tiled_gen12_rc_ccs_cc.html
- shard-rkl: NOTRUN -> [SKIP][111] ([i915#5354]) +5 similar issues
[111]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-2/igt@kms_ccs@pipe-d-bad-aux-stride-y_tiled_gen12_rc_ccs_cc.html

* igt@kms_ccs@pipe-d-ccs-on-another-bo-yf_tiled_ccs:
- shard-tglu: NOTRUN -> [SKIP][112] ([fdo#111615] / [i915#3689] / [i915#5354] / [i915#6095])
[112]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-3/igt@kms_ccs@pipe-d-ccs-on-another-bo-yf_tiled_ccs.html

* igt@kms_cdclk@mode-transition@pipe-d-dp-4:
- shard-dg2: NOTRUN -> [SKIP][113] ([i915#4087] / [i915#7213]) +3 similar issues
[113]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-11/igt@kms_cdclk@[email protected]

* igt@kms_chamelium_audio@hdmi-audio-edid:
- shard-mtlp: NOTRUN -> [SKIP][114] ([i915#7828]) +3 similar issues
[114]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-5/igt@[email protected]

* igt@kms_chamelium_color@ctm-max:
- shard-tglu: NOTRUN -> [SKIP][115] ([fdo#111827])
[115]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-4/igt@[email protected]

* igt@kms_chamelium_hpd@dp-hpd:
- shard-tglu: NOTRUN -> [SKIP][116] ([i915#7828])
[116]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-3/igt@[email protected]

* igt@kms_content_protection@dp-mst-lic-type-0:
- shard-dg2: NOTRUN -> [SKIP][117] ([i915#3299])
[117]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-8/igt@[email protected]

* igt@kms_content_protection@srm@pipe-a-dp-4:
- shard-dg2: NOTRUN -> [TIMEOUT][118] ([i915#7173])
[118]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-11/igt@kms_content_protection@[email protected]

* igt@kms_cursor_crc@cursor-offscreen-32x10:
- shard-dg2: NOTRUN -> [SKIP][119] ([i915#3555]) +2 similar issues
[119]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-11/igt@[email protected]

* igt@kms_cursor_crc@cursor-onscreen-32x10:
- shard-rkl: NOTRUN -> [SKIP][120] ([i915#3555])
[120]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-6/igt@[email protected]

* igt@kms_cursor_crc@cursor-random-512x512:
- shard-mtlp: NOTRUN -> [SKIP][121] ([i915#3359]) +1 similar issue
[121]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-6/igt@[email protected]

* igt@kms_cursor_crc@cursor-suspend@pipe-a-hdmi-a-3:
- shard-dg2: NOTRUN -> [FAIL][122] ([fdo#103375] / [i915#6121]) +1 similar issue
[122]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-5/igt@kms_cursor_crc@[email protected]

* igt@kms_cursor_legacy@2x-flip-vs-cursor-atomic:
- shard-snb: NOTRUN -> [SKIP][123] ([fdo#109271] / [fdo#111767]) +1 similar issue
[123]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-snb6/igt@[email protected]
- shard-tglu: NOTRUN -> [SKIP][124] ([fdo#109274] / [fdo#111767])
[124]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-6/igt@[email protected]

* igt@kms_cursor_legacy@2x-nonblocking-modeset-vs-cursor-atomic:
- shard-mtlp: NOTRUN -> [SKIP][125] ([i915#3546]) +2 similar issues
[125]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-4/igt@[email protected]

* igt@kms_cursor_legacy@cursor-vs-flip-toggle:
- shard-mtlp: [PASS][126] -> [FAIL][127] ([i915#8248])
[126]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-1/igt@[email protected]
[127]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-6/igt@[email protected]

* igt@kms_cursor_legacy@cursorb-vs-flipa-varying-size:
- shard-dg2: NOTRUN -> [SKIP][128] ([fdo#109274] / [i915#5354]) +1 similar issue
[128]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-1/igt@[email protected]

* igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions-varying-size:
- shard-apl: [PASS][129] -> [FAIL][130] ([i915#2346]) +1 similar issue
[129]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-apl2/igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions-varying-size.html
[130]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-apl2/igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions-varying-size.html

* igt@kms_display_modes@extended-mode-basic:
- shard-tglu: NOTRUN -> [SKIP][131] ([i915#3555])
[131]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-2/igt@[email protected]

* igt@kms_flip@2x-absolute-wf_vblank:
- shard-tglu: NOTRUN -> [SKIP][132] ([fdo#109274] / [i915#3637] / [i915#3966])
[132]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-7/igt@kms_flip@2x-absolute-wf_vblank.html

* igt@kms_flip@2x-flip-vs-dpms:
- shard-tglu: NOTRUN -> [SKIP][133] ([fdo#109274] / [i915#3637]) +1 similar issue
[133]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-5/igt@[email protected]

* igt@kms_flip@2x-modeset-vs-vblank-race:
- shard-dg2: NOTRUN -> [SKIP][134] ([fdo#109274]) +1 similar issue
[134]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-2/igt@[email protected]
- shard-rkl: NOTRUN -> [SKIP][135] ([fdo#111825]) +1 similar issue
[135]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-4/igt@[email protected]
- shard-mtlp: NOTRUN -> [SKIP][136] ([i915#3637]) +1 similar issue
[136]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-3/igt@[email protected]

* igt@kms_flip@flip-vs-fences:
- shard-mtlp: NOTRUN -> [SKIP][137] ([i915#8381])
[137]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-1/igt@[email protected]

* igt@kms_flip_scaled_crc@flip-32bpp-ytileccs-to-64bpp-ytile-downscaling@pipe-a-valid-mode:
- shard-tglu: NOTRUN -> [SKIP][138] ([i915#2587] / [i915#2672]) +1 similar issue
[138]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-7/igt@kms_flip_scaled_crc@flip-32bpp-ytileccs-to-64bpp-ytile-downscaling@pipe-a-valid-mode.html

* igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-16bpp-4tile-downscaling@pipe-a-default-mode:
- shard-mtlp: NOTRUN -> [SKIP][139] ([i915#8810])
[139]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-7/igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-16bpp-4tile-downscaling@pipe-a-default-mode.html

* igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-32bpp-4tile-downscaling@pipe-a-valid-mode:
- shard-rkl: NOTRUN -> [SKIP][140] ([i915#2672])
[140]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-1/igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-32bpp-4tile-downscaling@pipe-a-valid-mode.html

* igt@kms_flip_scaled_crc@flip-64bpp-ytile-to-16bpp-ytile-upscaling@pipe-a-default-mode:
- shard-mtlp: NOTRUN -> [SKIP][141] ([i915#2672])
[141]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-7/igt@kms_flip_scaled_crc@flip-64bpp-ytile-to-16bpp-ytile-upscaling@pipe-a-default-mode.html

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-shrfb-pgflip-blt:
- shard-dg2: [PASS][142] -> [FAIL][143] ([i915#6880]) +1 similar issue
[142]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-dg2-11/igt@[email protected]
[143]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-11/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-indfb-plflip-blt:
- shard-rkl: NOTRUN -> [SKIP][144] ([fdo#111825] / [i915#1825]) +6 similar issues
[144]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-7/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-shrfb-draw-mmap-gtt:
- shard-dg2: NOTRUN -> [SKIP][145] ([i915#8708]) +6 similar issues
[145]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-5/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-shrfb-draw-mmap-gtt.html

* igt@kms_frontbuffer_tracking@fbcpsr-2p-scndscrn-pri-shrfb-draw-mmap-wc:
- shard-tglu: NOTRUN -> [SKIP][146] ([fdo#109280]) +6 similar issues
[146]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-8/igt@kms_frontbuffer_tracking@fbcpsr-2p-scndscrn-pri-shrfb-draw-mmap-wc.html

* igt@kms_frontbuffer_tracking@fbcpsr-2p-scndscrn-spr-indfb-fullscreen:
- shard-mtlp: NOTRUN -> [SKIP][147] ([i915#1825]) +16 similar issues
[147]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-2/igt@kms_frontbuffer_tracking@fbcpsr-2p-scndscrn-spr-indfb-fullscreen.html

* igt@kms_frontbuffer_tracking@fbcpsr-rgb101010-draw-blt:
- shard-snb: NOTRUN -> [SKIP][148] ([fdo#109271]) +322 similar issues
[148]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-snb2/igt@[email protected]

* igt@kms_frontbuffer_tracking@psr-1p-primscrn-indfb-plflip-blt:
- shard-rkl: NOTRUN -> [SKIP][149] ([i915#3023]) +5 similar issues
[149]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-7/igt@[email protected]

* igt@kms_frontbuffer_tracking@psr-1p-primscrn-spr-indfb-move:
- shard-dg2: NOTRUN -> [SKIP][150] ([i915#3458]) +3 similar issues
[150]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-7/igt@[email protected]

* igt@kms_hdr@bpc-switch:
- shard-dg2: NOTRUN -> [SKIP][151] ([i915#3555] / [i915#8228]) +1 similar issue
[151]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-1/igt@[email protected]

* igt@kms_hdr@bpc-switch-dpms:
- shard-rkl: NOTRUN -> [SKIP][152] ([i915#3555] / [i915#8228]) +1 similar issue
[152]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-7/igt@[email protected]

* igt@kms_hdr@static-toggle-suspend:
- shard-mtlp: NOTRUN -> [SKIP][153] ([i915#8228])
[153]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-1/igt@[email protected]

* igt@kms_multipipe_modeset@basic-max-pipe-crc-check:
- shard-tglu: NOTRUN -> [SKIP][154] ([i915#1839])
[154]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-7/igt@[email protected]

* igt@kms_pipe_b_c_ivb@pipe-b-dpms-off-modeset-pipe-c:
- shard-tglu: NOTRUN -> [SKIP][155] ([fdo#109289]) +1 similar issue
[155]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-9/igt@[email protected]

* igt@kms_plane@plane-panning-bottom-right-suspend@pipe-a-planes:
- shard-dg2: [PASS][156] -> [FAIL][157] ([fdo#103375] / [i915#6121])
[156]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-dg2-7/igt@kms_plane@[email protected]
[157]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-5/igt@kms_plane@[email protected]

* igt@kms_plane_scaling@2x-scaler-multi-pipe:
- shard-tglu: NOTRUN -> [SKIP][158] ([fdo#109274])
[158]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-2/igt@[email protected]

* igt@kms_plane_scaling@intel-max-src-size@pipe-a-hdmi-a-1:
- shard-tglu: [PASS][159] -> [FAIL][160] ([i915#8292])
[159]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-tglu-3/igt@kms_plane_scaling@[email protected]
[160]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-2/igt@kms_plane_scaling@[email protected]

* igt@kms_plane_scaling@plane-downscale-with-modifiers-factor-0-25@pipe-b-hdmi-a-1:
- shard-rkl: NOTRUN -> [SKIP][161] ([i915#5176]) +7 similar issues
[161]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-7/igt@kms_plane_scaling@[email protected]

* igt@kms_plane_scaling@plane-downscale-with-modifiers-factor-0-25@pipe-d-dp-4:
- shard-dg2: NOTRUN -> [SKIP][162] ([i915#5176]) +3 similar issues
[162]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-11/igt@kms_plane_scaling@[email protected]

* igt@kms_plane_scaling@plane-downscale-with-modifiers-factor-0-5@pipe-c-edp-1:
- shard-mtlp: NOTRUN -> [SKIP][163] ([i915#5176]) +3 similar issues
[163]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-1/igt@kms_plane_scaling@[email protected]

* igt@kms_plane_scaling@plane-downscale-with-rotation-factor-0-5@pipe-b-hdmi-a-1:
- shard-tglu: NOTRUN -> [SKIP][164] ([i915#5176]) +3 similar issues
[164]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-5/igt@kms_plane_scaling@[email protected]

* igt@kms_plane_scaling@planes-unity-scaling-downscale-factor-0-5@pipe-d-edp-1:
- shard-mtlp: NOTRUN -> [SKIP][165] ([i915#5235]) +3 similar issues
[165]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-6/igt@kms_plane_scaling@[email protected]

* igt@kms_plane_scaling@planes-upscale-20x20-downscale-factor-0-25@pipe-b-hdmi-a-1:
- shard-rkl: NOTRUN -> [SKIP][166] ([i915#5235]) +5 similar issues
[166]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-7/igt@kms_plane_scaling@[email protected]

* igt@kms_plane_scaling@planes-upscale-factor-0-25-downscale-factor-0-25@pipe-a-dp-4:
- shard-dg2: NOTRUN -> [SKIP][167] ([i915#5235]) +11 similar issues
[167]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-11/igt@kms_plane_scaling@planes-upscale-factor-0-25-downscale-factor-0-25@pipe-a-dp-4.html

* igt@kms_psr2_sf@overlay-plane-update-continuous-sf:
- shard-rkl: NOTRUN -> [SKIP][168] ([fdo#111068] / [i915#658])
[168]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-4/igt@[email protected]

* igt@kms_psr@psr2_primary_page_flip:
- shard-tglu: NOTRUN -> [SKIP][169] ([fdo#110189]) +15 similar issues
[169]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-4/igt@kms_psr@psr2_primary_page_flip.html

* igt@kms_psr@psr2_sprite_mmap_gtt:
- shard-dg2: NOTRUN -> [SKIP][170] ([i915#1072])
[170]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-7/igt@kms_psr@psr2_sprite_mmap_gtt.html
- shard-rkl: NOTRUN -> [SKIP][171] ([i915#1072]) +1 similar issue
[171]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-7/igt@kms_psr@psr2_sprite_mmap_gtt.html

* igt@kms_rotation_crc@bad-pixel-format:
- shard-mtlp: NOTRUN -> [SKIP][172] ([i915#4235])
[172]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-5/igt@[email protected]

* igt@kms_rotation_crc@primary-y-tiled-reflect-x-0:
- shard-mtlp: NOTRUN -> [SKIP][173] ([i915#5289])
[173]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-2/igt@[email protected]

* igt@kms_tv_load_detect@load-detect:
- shard-tglu: NOTRUN -> [SKIP][174] ([fdo#109309])
[174]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-10/igt@[email protected]

* igt@kms_vblank@pipe-d-accuracy-idle:
- shard-rkl: NOTRUN -> [SKIP][175] ([i915#4070] / [i915#533] / [i915#6768])
[175]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-7/igt@[email protected]

* igt@kms_writeback@writeback-fb-id:
- shard-dg2: NOTRUN -> [SKIP][176] ([i915#2437])
[176]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-1/igt@[email protected]
- shard-rkl: NOTRUN -> [SKIP][177] ([i915#2437])
[177]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-2/igt@[email protected]
- shard-mtlp: NOTRUN -> [SKIP][178] ([i915#2437])
[178]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-1/igt@[email protected]

* igt@kms_writeback@writeback-invalid-parameters:
- shard-tglu: NOTRUN -> [SKIP][179] ([i915#2437])
[179]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-9/igt@[email protected]

* igt@perf@global-sseu-config-invalid:
- shard-mtlp: NOTRUN -> [SKIP][180] ([i915#7387])
[180]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-7/igt@[email protected]

* igt@perf@non-zero-reason@0-rcs0:
- shard-dg2: [PASS][181] -> [FAIL][182] ([i915#7484])
[181]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-dg2-10/igt@perf@[email protected]
[182]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-11/igt@perf@[email protected]

* igt@perf_pmu@busy-idle@vcs0:
- shard-dg2: [PASS][183] -> [FAIL][184] ([i915#4349]) +7 similar issues
[183]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-dg2-2/igt@perf_pmu@[email protected]
[184]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-11/igt@perf_pmu@[email protected]
- shard-mtlp: [PASS][185] -> [FAIL][186] ([i915#4349]) +3 similar issues
[185]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-4/igt@perf_pmu@[email protected]
[186]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-7/igt@perf_pmu@[email protected]

* igt@perf_pmu@most-busy-check-all@rcs0:
- shard-rkl: [PASS][187] -> [FAIL][188] ([i915#4349])
[187]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-rkl-6/igt@perf_pmu@[email protected]
[188]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-7/igt@perf_pmu@[email protected]

* igt@prime_vgem@basic-fence-mmap:
- shard-dg2: NOTRUN -> [SKIP][189] ([i915#3708] / [i915#4077])
[189]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-11/igt@[email protected]

* igt@prime_vgem@basic-write:
- shard-mtlp: NOTRUN -> [SKIP][190] ([i915#3708])
[190]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-4/igt@[email protected]

* igt@prime_vgem@fence-read-hang:
- shard-tglu: NOTRUN -> [SKIP][191] ([fdo#109295])
[191]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-7/igt@[email protected]

* igt@v3d/v3d_get_param@base-params:
- shard-rkl: NOTRUN -> [SKIP][192] ([fdo#109315]) +1 similar issue
[192]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-2/igt@v3d/[email protected]

* igt@v3d/v3d_job_submission@multiple-singlesync-to-multisync:
- shard-tglu: NOTRUN -> [SKIP][193] ([fdo#109315] / [i915#2575]) +1 similar issue
[193]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-6/igt@v3d/[email protected]

* igt@v3d/v3d_perfmon@get-values-invalid-pointer:
- shard-mtlp: NOTRUN -> [SKIP][194] ([i915#2575]) +5 similar issues
[194]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-6/igt@v3d/[email protected]

* igt@v3d/v3d_submit_csd@bad-in-sync:
- shard-dg2: NOTRUN -> [SKIP][195] ([i915#2575]) +1 similar issue
[195]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-7/igt@v3d/[email protected]

* igt@vc4/vc4_mmap@mmap-bad-handle:
- shard-tglu: NOTRUN -> [SKIP][196] ([i915#2575]) +1 similar issue
[196]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-2/igt@vc4/[email protected]

* igt@vc4/vc4_tiling@get-after-free:
- shard-mtlp: NOTRUN -> [SKIP][197] ([i915#7711]) +2 similar issues
[197]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-4/igt@vc4/[email protected]

* igt@vc4/vc4_tiling@get-bad-modifier:
- shard-dg2: NOTRUN -> [SKIP][198] ([i915#7711]) +1 similar issue
[198]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-7/igt@vc4/[email protected]
- shard-rkl: NOTRUN -> [SKIP][199] ([i915#7711])
[199]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-7/igt@vc4/[email protected]

#### Possible fixes ####

* igt@drm_fdinfo@most-busy-check-all@rcs0:
- shard-rkl: [FAIL][200] ([i915#7742]) -> [PASS][201]
[200]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-rkl-7/igt@drm_fdinfo@[email protected]
[201]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-4/igt@drm_fdinfo@[email protected]

* igt@gem_ctx_persistence@legacy-engines-hostile@vebox:
- shard-mtlp: [FAIL][202] ([i915#2410]) -> [PASS][203] +2 similar issues
[202]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-8/igt@gem_ctx_persistence@[email protected]
[203]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-1/igt@gem_ctx_persistence@[email protected]

* igt@gem_eio@reset-stress:
- shard-dg2: [FAIL][204] ([i915#5784]) -> [PASS][205]
[204]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-dg2-1/igt@[email protected]
[205]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-10/igt@[email protected]

* igt@gem_eio@unwedge-stress:
- {shard-dg1}: [FAIL][206] ([i915#5784]) -> [PASS][207] +1 similar issue
[206]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-dg1-19/igt@[email protected]
[207]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg1-19/igt@[email protected]

* igt@gem_exec_fair@basic-none@bcs0:
- shard-rkl: [FAIL][208] ([i915#2842]) -> [PASS][209] +3 similar issues
[208]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-rkl-6/igt@gem_exec_fair@[email protected]
[209]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-1/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace-share@rcs0:
- shard-tglu: [FAIL][210] ([i915#2842]) -> [PASS][211]
[210]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-tglu-8/igt@gem_exec_fair@[email protected]
[211]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-9/igt@gem_exec_fair@[email protected]

* igt@gem_exec_schedule@deep@vecs0:
- shard-mtlp: [FAIL][212] ([i915#8606]) -> [PASS][213]
[212]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-8/igt@gem_exec_schedule@[email protected]
[213]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-4/igt@gem_exec_schedule@[email protected]

* igt@gem_exec_schedule@preemptive-hang@vcs0:
- shard-mtlp: [FAIL][214] ([i915#7327]) -> [PASS][215]
[214]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-5/igt@gem_exec_schedule@[email protected]
[215]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-6/igt@gem_exec_schedule@[email protected]

* igt@gem_exec_whisper@basic-contexts-forked-all:
- shard-mtlp: [TIMEOUT][216] ([i915#8628]) -> [PASS][217]
[216]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-8/igt@[email protected]
[217]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-7/igt@[email protected]

* igt@gem_exec_whisper@basic-forked-all:
- shard-mtlp: [FAIL][218] ([i915#6363]) -> [PASS][219]
[218]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-3/igt@[email protected]
[219]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-4/igt@[email protected]

* igt@i915_hangman@detector@vcs0:
- shard-mtlp: [FAIL][220] ([i915#8456]) -> [PASS][221] +2 similar issues
[220]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-4/igt@i915_hangman@[email protected]
[221]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-2/igt@i915_hangman@[email protected]

* igt@i915_hangman@engine-engine-hang@vcs0:
- shard-mtlp: [FAIL][222] ([i915#7069]) -> [PASS][223]
[222]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-3/igt@i915_hangman@[email protected]
[223]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-5/igt@i915_hangman@[email protected]

* igt@i915_module_load@reload-with-fault-injection:
- shard-dg2: [DMESG-WARN][224] ([i915#7061]) -> [PASS][225]
[224]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-dg2-1/igt@[email protected]
[225]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-6/igt@[email protected]
- shard-mtlp: [ABORT][226] ([i915#8489] / [i915#8668]) -> [PASS][227]
[226]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-5/igt@[email protected]
[227]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-6/igt@[email protected]

* igt@i915_pm_dc@dc9-dpms:
- shard-apl: [SKIP][228] ([fdo#109271]) -> [PASS][229]
[228]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-apl1/igt@[email protected]
[229]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-apl2/igt@[email protected]

* igt@i915_pm_rc6_residency@rc6-idle@rcs0:
- {shard-dg1}: [FAIL][230] ([i915#3591]) -> [PASS][231]
[230]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-dg1-16/igt@i915_pm_rc6_residency@[email protected]
[231]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg1-19/igt@i915_pm_rc6_residency@[email protected]

* igt@i915_pm_rpm@gem-execbuf-stress@smem0:
- {shard-dg1}: [FAIL][232] ([i915#7940]) -> [PASS][233] +2 similar issues
[232]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-dg1-14/igt@i915_pm_rpm@[email protected]
[233]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg1-18/igt@i915_pm_rpm@[email protected]

* igt@i915_pm_rpm@modeset-lpsp-stress:
- shard-rkl: [SKIP][234] ([i915#1397]) -> [PASS][235]
[234]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-rkl-2/igt@[email protected]
[235]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-rkl-7/igt@[email protected]

* igt@i915_pm_rpm@modeset-lpsp-stress-no-wait:
- {shard-dg1}: [SKIP][236] ([i915#1397]) -> [PASS][237] +1 similar issue
[236]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-dg1-14/igt@[email protected]
[237]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg1-19/igt@[email protected]

* igt@i915_selftest@live@gt_mocs:
- shard-mtlp: [DMESG-FAIL][238] ([i915#7059]) -> [PASS][239]
[238]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-3/igt@i915_selftest@live@gt_mocs.html
[239]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-2/igt@i915_selftest@live@gt_mocs.html

* igt@i915_selftest@live@sanitycheck:
- shard-snb: [ABORT][240] ([i915#4528]) -> [PASS][241]
[240]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-snb2/igt@i915_selftest@[email protected]
[241]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-snb2/igt@i915_selftest@[email protected]

* igt@i915_selftest@live@workarounds:
- shard-mtlp: [DMESG-FAIL][242] ([i915#6763]) -> [PASS][243]
[242]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-3/igt@i915_selftest@[email protected]
[243]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-2/igt@i915_selftest@[email protected]

* igt@kms_big_fb@4-tiled-64bpp-rotate-180:
- shard-mtlp: [FAIL][244] ([i915#5138]) -> [PASS][245]
[244]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-3/igt@[email protected]
[245]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-1/igt@[email protected]

* igt@kms_big_fb@4-tiled-max-hw-stride-32bpp-rotate-180-async-flip:
- shard-mtlp: [FAIL][246] ([i915#3743]) -> [PASS][247] +2 similar issues
[246]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-7/igt@kms_big_fb@4-tiled-max-hw-stride-32bpp-rotate-180-async-flip.html
[247]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-4/igt@kms_big_fb@4-tiled-max-hw-stride-32bpp-rotate-180-async-flip.html

* igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions:
- shard-glk: [FAIL][248] ([i915#2346]) -> [PASS][249] +1 similar issue
[248]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-glk6/igt@[email protected]
[249]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-glk1/igt@[email protected]

* igt@kms_flip@flip-vs-expired-vblank-interruptible@b-hdmi-a1:
- shard-glk: [FAIL][250] ([i915#79]) -> [PASS][251]
[250]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-glk7/igt@kms_flip@[email protected]
[251]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-glk8/igt@kms_flip@[email protected]

* igt@kms_psr@psr2_primary_render:
- shard-mtlp: [FAIL][252] ([i915#8726]) -> [PASS][253]
[252]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-2/igt@kms_psr@psr2_primary_render.html
[253]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-4/igt@kms_psr@psr2_primary_render.html

* igt@perf_pmu@busy-double-start@rcs0:
- shard-dg2: [FAIL][254] ([i915#4349]) -> [PASS][255] +5 similar issues
[254]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-dg2-12/igt@perf_pmu@[email protected]
[255]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-2/igt@perf_pmu@[email protected]

* igt@perf_pmu@semaphore-busy@ccs0:
- shard-mtlp: [FAIL][256] ([i915#4349]) -> [PASS][257]
[256]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-8/igt@perf_pmu@[email protected]
[257]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-3/igt@perf_pmu@[email protected]

* igt@sysfs_heartbeat_interval@precise@vecs0:
- shard-mtlp: [FAIL][258] ([i915#8332]) -> [PASS][259]
[258]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-6/igt@sysfs_heartbeat_interval@[email protected]
[259]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-6/igt@sysfs_heartbeat_interval@[email protected]

* igt@sysfs_preempt_timeout@timeout@vecs0:
- shard-mtlp: [TIMEOUT][260] ([i915#7947]) -> [PASS][261]
[260]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-1/igt@sysfs_preempt_timeout@[email protected]
[261]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-1/igt@sysfs_preempt_timeout@[email protected]

#### Warnings ####

* igt@gem_lmem_swapping@smem-oom@lmem0:
- shard-dg2: [DMESG-WARN][262] ([i915#4936] / [i915#5493]) -> [TIMEOUT][263] ([i915#5493])
[262]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-dg2-7/igt@gem_lmem_swapping@[email protected]
[263]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-11/igt@gem_lmem_swapping@[email protected]

* igt@i915_pm_rc6_residency@rc6-idle@bcs0:
- shard-tglu: [FAIL][264] ([i915#2681] / [i915#3591]) -> [WARN][265] ([i915#2681])
[264]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-tglu-7/igt@i915_pm_rc6_residency@[email protected]
[265]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-3/igt@i915_pm_rc6_residency@[email protected]

* igt@i915_pm_rc6_residency@rc6-idle@rcs0:
- shard-tglu: [WARN][266] ([i915#2681]) -> [FAIL][267] ([i915#2681] / [i915#3591]) +1 similar issue
[266]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-tglu-7/igt@i915_pm_rc6_residency@[email protected]
[267]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-tglu-3/igt@i915_pm_rc6_residency@[email protected]

* igt@kms_async_flips@crc@pipe-a-edp-1:
- shard-mtlp: [DMESG-FAIL][268] ([i915#8561]) -> [DMESG-FAIL][269] ([i915#1982] / [i915#8561])
[268]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-mtlp-1/igt@kms_async_flips@[email protected]
[269]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-mtlp-1/igt@kms_async_flips@[email protected]

* igt@kms_content_protection@type1:
- shard-dg2: [SKIP][270] ([i915#7118] / [i915#7162]) -> [SKIP][271] ([i915#7118]) +1 similar issue
[270]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13364/shard-dg2-11/igt@[email protected]
[271]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/shard-dg2-10/igt@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#103375]: https://bugs.freedesktop.org/show_bug.cgi?id=103375
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109274]: https://bugs.freedesktop.org/show_bug.cgi?id=109274
[fdo#109280]: https://bugs.freedesktop.org/show_bug.cgi?id=109280
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109295]: https://bugs.freedesktop.org/show_bug.cgi?id=109295
[fdo#109309]: https://bugs.freedesktop.org/show_bug.cgi?id=109309
[fdo#109314]: https://bugs.freedesktop.org/show_bug.cgi?id=109314
[fdo#109315]: https://bugs.freedesktop.org/show_bug.cgi?id=109315
[fdo#109506]: https://bugs.freedesktop.org/show_bug.cgi?id=109506
[fdo#110189]: https://bugs.freedesktop.org/show_bug.cgi?id=110189
[fdo#110723]: https://bugs.freedesktop.org/show_bug.cgi?id=110723
[fdo#111068]: https://bugs.freedesktop.org/show_bug.cgi?id=111068
[fdo#111614]: https://bugs.freedesktop.org/show_bug.cgi?id=111614
[fdo#111615]: https://bugs.freedesktop.org/show_bug.cgi?id=111615
[fdo#111767]: https://bugs.freedesktop.org/show_bug.cgi?id=111767
[fdo#111825]: https://bugs.freedesktop.org/show_bug.cgi?id=111825
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[fdo#112283]: https://bugs.freedesktop.org/show_bug.cgi?id=112283
[i915#1072]: https://gitlab.freedesktop.org/drm/intel/issues/1072
[i915#1099]: https://gitlab.freedesktop.org/drm/intel/issues/1099
[i915#1397]: https://gitlab.freedesktop.org/drm/intel/issues/1397
[i915#1769]: https://gitlab.freedesktop.org/drm/intel/issues/1769
[i915#1825]: https://gitlab.freedesktop.org/drm/intel/issues/1825
[i915#1839]: https://gitlab.freedesktop.org/drm/intel/issues/1839
[i915#1937]: https://gitlab.freedesktop.org/drm/intel/issues/1937
[i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
[i915#2295]: https://gitlab.freedesktop.org/drm/intel/issues/2295
[i915#2346]: https://gitlab.freedesktop.org/drm/intel/issues/2346
[i915#2410]: https://gitlab.freedesktop.org/drm/intel/issues/2410
[i915#2437]: https://gitlab.freedesktop.org/drm/intel/issues/2437
[i915#2527]: https://gitlab.freedesktop.org/drm/intel/issues/2527
[i915#2575]: https://gitlab.freedesktop.org/drm/intel/issues/2575
[i915#2587]: https://gitlab.freedesktop.org/drm/intel/issues/2587
[i915#2672]: https://gitlab.freedesktop.org/drm/intel/issues/2672
[i915#2681]: https://gitlab.freedesktop.org/drm/intel/issues/2681
[i915#280]: https://gitlab.freedesktop.org/drm/intel/issues/280
[i915#2842]: https://gitlab.freedesktop.org/drm/intel/issues/2842
[i915#2856]: https://gitlab.freedesktop.org/drm/intel/issues/2856
[i915#3023]: https://gitlab.freedesktop.org/drm/intel/issues/3023
[i915#3281]: https://gitlab.freedesktop.org/drm/intel/issues/3281
[i915#3282]: https://gitlab.freedesktop.org/drm/intel/issues/3282
[i915#3297]: https://gitlab.freedesktop.org/drm/intel/issues/3297
[i915#3299]: https://gitlab.freedesktop.org/drm/intel/issues/3299
[i915#3359]: https://gitlab.freedesktop.org/drm/intel/issues/3359
[i915#3458]: https://gitlab.freedesktop.org/drm/intel/issues/3458
[i915#3539]: https://gitlab.freedesktop.org/drm/intel/issues/3539
[i915#3546]: https://gitlab.freedesktop.org/drm/intel/issues/3546
[i915#3555]: https://gitlab.freedesktop.org/drm/intel/issues/3555
[i915#3591]: https://gitlab.freedesktop.org/drm/intel/issues/3591
[i915#3637]: https://gitlab.freedesktop.org/drm/intel/issues/3637
[i915#3638]: https://gitlab.freedesktop.org/drm/intel/issues/3638
[i915#3689]: https://gitlab.freedesktop.org/drm/intel/issues/3689
[i915#3708]: https://gitlab.freedesktop.org/drm/intel/issues/3708
[i915#3734]: https://gitlab.freedesktop.org/drm/intel/issues/3734
[i915#3743]: https://gitlab.freedesktop.org/drm/intel/issues/3743
[i915#3886]: https://gitlab.freedesktop.org/drm/intel/issues/3886
[i915#3966]: https://gitlab.freedesktop.org/drm/intel/issues/3966
[i915#404]: https://gitlab.freedesktop.org/drm/intel/issues/404
[i915#4070]: https://gitlab.freedesktop.org/drm/intel/issues/4070
[i915#4077]: https://gitlab.freedesktop.org/drm/intel/issues/4077
[i915#4078]: https://gitlab.freedesktop.org/drm/intel/issues/4078
[i915#4079]: https://gitlab.freedesktop.org/drm/intel/issues/4079
[i915#4083]: https://gitlab.freedesktop.org/drm/intel/issues/4083
[i915#4087]: https://gitlab.freedesktop.org/drm/intel/issues/4087
[i915#4235]: https://gitlab.freedesktop.org/drm/intel/issues/4235
[i915#4270]: https://gitlab.freedesktop.org/drm/intel/issues/4270
[i915#4349]: https://gitlab.freedesktop.org/drm/intel/issues/4349
[i915#4525]: https://gitlab.freedesktop.org/drm/intel/issues/4525
[i915#4528]: https://gitlab.freedesktop.org/drm/intel/issues/4528
[i915#4538]: https://gitlab.freedesktop.org/drm/intel/issues/4538
[i915#4613]: https://gitlab.freedesktop.org/drm/intel/issues/4613
[i915#4812]: https://gitlab.freedesktop.org/drm/intel/issues/4812
[i915#4852]: https://gitlab.freedesktop.org/drm/intel/issues/4852
[i915#4860]: https://gitlab.freedesktop.org/drm/intel/issues/4860
[i915#4936]: https://gitlab.freedesktop.org/drm/intel/issues/4936
[i915#5138]: https://gitlab.freedesktop.org/drm/intel/issues/5138
[i915#5176]: https://gitlab.freedesktop.org/drm/intel/issues/5176
[i915#5190]: https://gitlab.freedesktop.org/drm/intel/issues/5190
[i915#5235]: https://gitlab.freedesktop.org/drm/intel/issues/5235
[i915#5286]: https://gitlab.freedesktop.org/drm/intel/issues/5286
[i915#5289]: https://gitlab.freedesktop.org/drm/intel/issues/5289
[i915#5325]: https://gitlab.freedesktop.org/drm/intel/issues/5325
[i915#533]: https://gitlab.freedesktop.org/drm/intel/issues/533
[i915#5354]: https://gitlab.freedesktop.org/drm/intel/issues/5354
[i915#5493]: https://gitlab.freedesktop.org/drm/intel/issues/5493
[i915#5784]: https://gitlab.freedesktop.org/drm/intel/issues/5784
[i915#6095]: https://gitlab.freedesktop.org/drm/intel/issues/6095
[i915#6121]: https://gitlab.freedesktop.org/drm/intel/issues/6121
[i915#6227]: https://gitlab.freedesktop.org/drm/intel/issues/6227
[i915#6228]: https://gitlab.freedesktop.org/drm/intel/issues/6228
[i915#6268]: https://gitlab.freedesktop.org/drm/intel/issues/6268
[i915#6334]: https://gitlab.freedesktop.org/drm/intel/issues/6334
[i915#6363]: https://gitlab.freedesktop.org/drm/intel/issues/6363
[i915#6367]: https://gitlab.freedesktop.org/drm/intel/issues/6367
[i915#6412]: https://gitlab.freedesktop.org/drm/intel/issues/6412
[i915#658]: https://gitlab.freedesktop.org/drm/intel/issues/658
[i915#6621]: https://gitlab.freedesktop.org/drm/intel/issues/6621
[i915#6763]: https://gitlab.freedesktop.org/drm/intel/issues/6763
[i915#6768]: https://gitlab.freedesktop.org/drm/intel/issues/6768
[i915#6880]: https://gitlab.freedesktop.org/drm/intel/issues/6880
[i915#7059]: https://gitlab.freedesktop.org/drm/intel/issues/7059
[i915#7061]: https://gitlab.freedesktop.org/drm/intel/issues/7061
[i915#7069]: https://gitlab.freedesktop.org/drm/intel/issues/7069
[i915#7118]: https://gitlab.freedesktop.org/drm/intel/issues/7118
[i915#7162]: https://gitlab.freedesktop.org/drm/intel/issues/7162
[i915#7173]: https://gitlab.freedesktop.org/drm/intel/issues/7173
[i915#7213]: https://gitlab.freedesktop.org/drm/intel/issues/7213
[i915#7327]: https://gitlab.freedesktop.org/drm/intel/issues/7327
[i915#7387]: https://gitlab.freedesktop.org/drm/intel/issues/7387
[i915#7461]: https://gitlab.freedesktop.org/drm/intel/issues/7461
[i915#7484]: https://gitlab.freedesktop.org/drm/intel/issues/7484
[i915#7582]: https://gitlab.freedesktop.org/drm/intel/issues/7582
[i915#7697]: https://gitlab.freedesktop.org/drm/intel/issues/7697
[i915#7699]: https://gitlab.freedesktop.org/drm/intel/issues/7699
[i915#7711]: https://gitlab.freedesktop.org/drm/intel/issues/7711
[i915#7742]: https://gitlab.freedesktop.org/drm/intel/issues/7742
[i915#7828]: https://gitlab.freedesktop.org/drm/intel/issues/7828
[i915#79]: https://gitlab.freedesktop.org/drm/intel/issues/79
[i915#7940]: https://gitlab.freedesktop.org/drm/intel/issues/7940
[i915#7947]: https://gitlab.freedesktop.org/drm/intel/issues/7947
[i915#7975]: https://gitlab.freedesktop.org/drm/intel/issues/7975
[i915#8211]: https://gitlab.freedesktop.org/drm/intel/issues/8211
[i915#8213]: https://gitlab.freedesktop.org/drm/intel/issues/8213
[i915#8228]: https://gitlab.freedesktop.org/drm/intel/issues/8228
[i915#8247]: https://gitlab.freedesktop.org/drm/intel/issues/8247
[i915#8248]: https://gitlab.freedesktop.org/drm/intel/issues/8248
[i915#8292]: https://gitlab.freedesktop.org/drm/intel/issues/8292
[i915#8332]: https://gitlab.freedesktop.org/drm/intel/issues/8332
[i915#8381]: https://gitlab.freedesktop.org/drm/intel/issues/8381
[i915#8399]: https://gitlab.freedesktop.org/drm/intel/issues/8399
[i915#8411]: https://gitlab.freedesktop.org/drm/intel/issues/8411
[i915#8414]: https://gitlab.freedesktop.org/drm/intel/issues/8414
[i915#8428]: https://gitlab.freedesktop.org/drm/intel/issues/8428
[i915#8431]: https://gitlab.freedesktop.org/drm/intel/issues/8431
[i915#8456]: https://gitlab.freedesktop.org/drm/intel/issues/8456
[i915#8489]: https://gitlab.freedesktop.org/drm/intel/issues/8489
[i915#8502]: https://gitlab.freedesktop.org/drm/intel/issues/8502
[i915#8503]: https://gitlab.freedesktop.org/drm/intel/issues/8503
[i915#8555]: https://gitlab.freedesktop.org/drm/intel/issues/8555
[i915#8561]: https://gitlab.freedesktop.org/drm/intel/issues/8561
[i915#8606]: https://gitlab.freedesktop.org/drm/intel/issues/8606
[i915#8628]: https://gitlab.freedesktop.org/drm/intel/issues/8628
[i915#8661]: https://gitlab.freedesktop.org/drm/intel/issues/8661
[i915#8668]: https://gitlab.freedesktop.org/drm/intel/issues/8668
[i915#8708]: https://gitlab.freedesktop.org/drm/intel/issues/8708
[i915#8709]: https://gitlab.freedesktop.org/drm/intel/issues/8709
[i915#8726]: https://gitlab.freedesktop.org/drm/intel/issues/8726
[i915#8810]: https://gitlab.freedesktop.org/drm/intel/issues/8810
[i915#8841]: https://gitlab.freedesktop.org/drm/intel/issues/8841

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_7377 -> IGTPW_9376
* Piglit: piglit_4509 -> None

CI-20190529: 20190529
CI_DRM_13364: 91010bd5ed0a15e689f0fcc3817489bd02433884 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_9376: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/index.html
IGT_7377: d1574543ba4bb322597345530053475c07be0eb9 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_9376/index.html

#27 lore raw

[igt-dev] ✗ Fi.CI.BUILD: failure for Speedup IGT build time (rev2)

In reply to Mauro Carvalho Chehab
== Series Details ==

== Series Details ==

Series: Speedup IGT build time (rev2)
URL : https://patchwork.freedesktop.org/series/120459/
State : failure

== Summary ==

Applying: tests/meson.build: Simplify builds for core and i915 targets Using index info to reconstruct a base tree...
M tests/meson.build
Falling back to patching base and 3-way merge...
Auto-merging tests/meson.build
CONFLICT (content): Merge conflict in tests/meson.build
Patch failed at 0001 tests/meson.build: Simplify builds for core and i915 targets When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".