Skip to contentSkip to conversation

PCI/VGA: Improve the default VGA device selection

PATCH Superseded Sui Jingfeng 1 participant 6 messages Jul 11, 2023

Subsystems (12)
DRM drivers KVM DRM misc Intel i915 +8 more subsystems
lore
Share & tools
lore
#0 lore raw

v3 cover PCI/VGA: Improve the default VGA device selection

From: Sui Jingfeng <[email protected]>

Currently, the default VGA device selection is not perfect. Potential problems are:

1) This function is a no-op on non-x86 architectures.
2) It does not take the PCI Bar may get relocated into consideration.
3) It is not effective for the PCI device without a dedicated VRAM Bar.
4) It is device-agnostic, thus it has to waste the effort to iterate all of the PCI Bar to find the VRAM aperture.
5) It has invented lots of methods to determine which one is the default boot device on a multiple video card coexistence system. But this is still a policy because it doesn't give the user a choice to override.

With the observation that device drivers or video aperture helpers may have better knowledge about which PCI bar contains the firmware FB,

This patch tries to solve the above problems by introducing a function callback to the vga_client_register() function interface. DRM device drivers for the PCI device need to register the is_boot_device() function callback during the driver loading time. Once the driver binds the device successfully, VRAARB will call back to the driver. This gives the device drivers a chance to provide accurate boot device identification. Which in turn unlock the abitration service to non-x86 architectures. A device driver can also pass a NULL pointer to keep the original behavior.

This series is applied on the drm-tip branch (with a cleanup patch set[1] applied beforehand)

[1] https://patchwork.freedesktop.org/series/120548/

v2:
* Add a simple implemment for drm/i915 and drm/ast
* Pick up all tags (Mario)
v3:
* Fix a mistake for drm/i915 implement
* Fix patch can not be applied problem because of drm/amdgpu merged other people's patch.

Sui Jingfeng (9):
video/aperture: Add a helper to detect if an aperture contains
firmware FB
video/aperture: Add a helper for determining if an unmoved aperture
contain FB
PCI/VGA: Switch to aperture_contain_firmware_fb_nonreloc() PCI/VGA: Improve the default VGA device selection drm/amdgpu: Implement the is_primary_gpu callback of
vga_client_register()
drm/radeon: Add an implement for the is_primary_gpu function callback drm/i915: Add an implement for the is_primary_gpu hook drm/ast: Register as a vga client to vgaarb by calling
vga_client_register()
drm/loongson: Add an implement for the is_primary_gpu function
callback

 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 12 +++-
 drivers/gpu/drm/ast/ast_drv.c              | 29 +++++++++
 drivers/gpu/drm/drm_aperture.c             | 16 +++++
 drivers/gpu/drm/i915/display/intel_vga.c   | 31 ++++++++-
 drivers/gpu/drm/loongson/lsdc_drv.c        | 10 ++-
 drivers/gpu/drm/nouveau/nouveau_vga.c      |  2 +-
 drivers/gpu/drm/radeon/radeon_device.c     | 12 +++-
 drivers/pci/vgaarb.c                       | 74 ++++++++++++++++------
 drivers/vfio/pci/vfio_pci_core.c           |  2 +-
 drivers/video/aperture.c                   | 65 +++++++++++++++++++
 include/drm/drm_aperture.h                 |  2 +
 include/linux/aperture.h                   | 14 ++++
 include/linux/vgaarb.h                     |  8 ++-
 13 files changed, 247 insertions(+), 30 deletions(-)
Signature · 1 line
2.25.1
#1 lore raw

PATCH v3 1/9 video/aperture: Add a helper to detect if an aperture contains firmware FB

From: Sui Jingfeng <[email protected]>

This patch adds the aperture_contain_firmware_fb() function to do the determination. Unfortunately, due to the fact that the apertures list will be freed dynamically, the location and size information of the firmware FB will be lost after dedicated drivers call aperture_remove_conflicting_devices(), aperture_remove_conflicting_pci_devices() or aperture_remove_all_conflicting_devices() functions

We solve this problem by introducing two static variables that record the firmware framebuffer's start addrness and end addrness. It assumes that the system has only one active firmware framebuffer driver at a time. We don't use the global structure screen_info here, because PCI resources may get reallocated (the VRAM BAR could be moved) during the kernel boot stage.

Cc Thomas Zimmermann <[email protected]>
Cc Javier Martinez Canillas <[email protected]>
Cc Bjorn Helgaas <[email protected]>
Cc Helge Deller <[email protected]>
---
 drivers/gpu/drm/drm_aperture.c | 16 ++++++++++++++++
 drivers/video/aperture.c       | 29 +++++++++++++++++++++++++++++
 include/drm/drm_aperture.h     |  2 ++
 include/linux/aperture.h       |  7 +++++++
 4 files changed, 54 insertions(+)
drivers/gpu/drm/drm_aperture.c +16 -0
index 5729f3bb4398..f9c957aa5874 100644
@@ -190,3 +190,19 @@ int drm_aperture_remove_conflicting_pci_framebuffers(struct pci_dev *pdev,
 	return aperture_remove_conflicting_pci_devices(pdev, req_driver->name);
 }
 EXPORT_SYMBOL(drm_aperture_remove_conflicting_pci_framebuffers);
+
+/**
+ * drm_aperture_contain_firmware_fb - Determine if a aperture contains firmware framebuffer
+ *
+ * @base: the aperture's base address in physical memory
+ * @size: aperture size in bytes
+ *
+ * Returns:
+ * true if there exist a firmware framebuffer inside of the aperture passed in,
+ * or false otherwise.
+ */
+bool drm_aperture_contain_firmware_fb(resource_size_t base, resource_size_t size)
+{
+	return aperture_contain_firmware_fb(base, base + size);
+}
+EXPORT_SYMBOL(drm_aperture_contain_firmware_fb);
drivers/video/aperture.c +29 -0
index 561be8feca96..34eb962cfae8 100644
@@ -141,6 +141,9 @@ struct aperture_range {
 static LIST_HEAD(apertures);
 static DEFINE_MUTEX(apertures_lock);
 
+static resource_size_t firm_fb_start;
+static resource_size_t firm_fb_end;
+
 static bool overlap(resource_size_t base1, resource_size_t end1,
 		    resource_size_t base2, resource_size_t end2)
 {
@@ -170,6 +173,9 @@ static int devm_aperture_acquire(struct device *dev,
 
 	mutex_lock(&apertures_lock);
 
+	firm_fb_start = base;
+	firm_fb_end = end;
+
 	list_for_each(pos, &apertures) {
 		ap = container_of(pos, struct aperture_range, lh);
 		if (overlap(base, end, ap->base, ap->base + ap->size)) {
@@ -377,3 +383,26 @@ int aperture_remove_conflicting_pci_devices(struct pci_dev *pdev, const char *na
 
 }
 EXPORT_SYMBOL(aperture_remove_conflicting_pci_devices);
+
+/**
+ * aperture_contain_firmware_fb - Detect if the firmware framebuffer belong to
+ *                                a aperture.
+ * @ap_start: the aperture's start address in physical memory
+ * @ap_end: the aperture's end address in physical memory
+ *
+ * Returns:
+ * true if there is a firmware framebuffer belong to the aperture passed in,
+ * or false otherwise.
+ */
+bool aperture_contain_firmware_fb(resource_size_t ap_start, resource_size_t ap_end)
+{
+	/* No firmware framebuffer support */
+	if (!firm_fb_start || !firm_fb_end)
+		return false;
+
+	if (firm_fb_start >= ap_start && firm_fb_end <= ap_end)
+		return true;
+
+	return false;
+}
+EXPORT_SYMBOL(aperture_contain_firmware_fb);
include/drm/drm_aperture.h +2 -0
index cbe33b49fd5d..6a0b9bacb081 100644
@@ -35,4 +35,6 @@ drm_aperture_remove_framebuffers(const struct drm_driver *req_driver)
 							    req_driver);
 }
 
+bool drm_aperture_contain_firmware_fb(resource_size_t base, resource_size_t size);
+
 #endif
include/linux/aperture.h +7 -0
index 1a9a88b11584..d4dc5917c49b 100644
@@ -19,6 +19,8 @@ int aperture_remove_conflicting_devices(resource_size_t base, resource_size_t si
 int __aperture_remove_legacy_vga_devices(struct pci_dev *pdev);
 
 int aperture_remove_conflicting_pci_devices(struct pci_dev *pdev, const char *name);
+
+bool aperture_contain_firmware_fb(resource_size_t ap_start, resource_size_t ap_end);
 #else
 static inline int devm_aperture_acquire_for_platform_device(struct platform_device *pdev,
 							    resource_size_t base,
@@ -42,6 +44,11 @@ static inline int aperture_remove_conflicting_pci_devices(struct pci_dev *pdev,
 {
 	return 0;
 }
+
+static inline bool aperture_contain_firmware_fb(resource_size_t ap_start, resource_size_t ap_end)
+{
+	return false;
+}
 #endif
 
 /**
Signature · 1 line
2.25.1
#2 lore raw

PATCH v3 2/9 video/aperture: Add a helper for determining if an unmoved aperture contain FB

In reply to Sui Jingfeng

From: Sui Jingfeng <[email protected]>

This patch is intended to form a uniform approach to determining if an unmoved aperture contains the firmware FB. I believe that the global screen_info is more about video-specific things.

Putting it in video/aperture.c helps form a uniform approach.

Cc Thomas Zimmermann <[email protected]>
Cc Javier Martinez Canillas <[email protected]>
Cc Helge Deller <[email protected]>
---
 drivers/video/aperture.c | 36 ++++++++++++++++++++++++++++++++++++
 include/linux/aperture.h |  7 +++++++
 2 files changed, 43 insertions(+)
drivers/video/aperture.c +36 -0
index 34eb962cfae8..f03dfcabc303 100644
@@ -6,6 +6,7 @@
 #include <linux/mutex.h>
 #include <linux/pci.h>
 #include <linux/platform_device.h>
+#include <linux/screen_info.h>
 #include <linux/slab.h>
 #include <linux/sysfb.h>
 #include <linux/types.h>
@@ -406,3 +407,38 @@ bool aperture_contain_firmware_fb(resource_size_t ap_start, resource_size_t ap_e
 	return false;
 }
 EXPORT_SYMBOL(aperture_contain_firmware_fb);
+
+/**
+ * aperture_contain_firmware_fb_nonreloc - Detect if the firmware framebuffer
+ * belong to a non-relocatable aperture, such as the aperture of platform
+ * device. Note that this function relay on the global screen info.
+ * @ap_start: the aperture's start address in physical memory
+ * @ap_end: the aperture's end address in physical memory
+ *
+ * Returns:
+ * true if there is a firmware framebuffer belong to the aperture passed in,
+ * or false otherwise.
+ */
+bool aperture_contain_firmware_fb_nonreloc(resource_size_t ap_start, resource_size_t ap_end)
+{
+	u64 fb_start;
+	u64 fb_end;
+
+	if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE) {
+		fb_start = (u64)screen_info.ext_lfb_base << 32 | screen_info.lfb_base;
+		fb_end = fb_start + screen_info.lfb_size;
+	} else {
+		fb_start = screen_info.lfb_base;
+		fb_end = fb_start + screen_info.lfb_size;
+	}
+
+	/* No firmware framebuffer support */
+	if (!fb_start || !fb_end)
+		return false;
+
+	if (fb_start >= ap_start && fb_end <= ap_end)
+		return true;
+
+	return false;
+}
+EXPORT_SYMBOL(aperture_contain_firmware_fb_nonreloc);
include/linux/aperture.h +7 -0
index d4dc5917c49b..906d23532b56 100644
@@ -21,6 +21,8 @@ int __aperture_remove_legacy_vga_devices(struct pci_dev *pdev);
 int aperture_remove_conflicting_pci_devices(struct pci_dev *pdev, const char *name);
 
 bool aperture_contain_firmware_fb(resource_size_t ap_start, resource_size_t ap_end);
+
+bool aperture_contain_firmware_fb_nonreloc(resource_size_t ap_start, resource_size_t ap_end);
 #else
 static inline int devm_aperture_acquire_for_platform_device(struct platform_device *pdev,
 							    resource_size_t base,
@@ -49,6 +51,11 @@ static inline bool aperture_contain_firmware_fb(resource_size_t ap_start, resour
 {
 	return false;
 }
+
+static bool aperture_contain_firmware_fb_nonreloc(resource_size_t ap_start, resource_size_t ap_end)
+{
+	return false;
+}
 #endif
 
 /**
Signature · 1 line
2.25.1
#3 lore raw

PATCH v3 3/9 PCI/VGA: Switch to aperture_contain_firmware_fb_nonreloc()

In reply to Sui Jingfeng

From: Sui Jingfeng <[email protected]>

The observation behind this is that we should avoid accessing the global screen_info directly. Call the aperture_contain_firmware_fb_nonreloc() function to implement the detection of whether an aperture contains the firmware FB.

This patch helps to decouple the determination from the implementation. Or, in other words, we intend to make the determination opaque to the caller. The determination may choose to be arch-dependent or arch-independent. But vgaarb, as a consumer of the determination, shouldn't care how the does determination is implemented.

---
 drivers/pci/vgaarb.c | 19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)
drivers/pci/vgaarb.c +4 -15
index bf96e085751d..953daf731b2c 100644
@@ -14,6 +14,7 @@
 #define vgaarb_info(dev, fmt, arg...)	dev_info(dev, "vgaarb: " fmt, ##arg)
 #define vgaarb_err(dev, fmt, arg...)	dev_err(dev, "vgaarb: " fmt, ##arg)
 
+#include <linux/aperture.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
@@ -26,7 +27,6 @@
 #include <linux/poll.h>
 #include <linux/miscdevice.h>
 #include <linux/slab.h>
-#include <linux/screen_info.h>
 #include <linux/vt.h>
 #include <linux/console.h>
 #include <linux/acpi.h>
@@ -558,20 +558,11 @@ void vga_put(struct pci_dev *pdev, unsigned int rsrc)
 }
 EXPORT_SYMBOL(vga_put);
 
+/* Select the device owning the boot framebuffer if there is one */
 static bool vga_is_firmware_default(struct pci_dev *pdev)
 {
 #if defined(CONFIG_X86) || defined(CONFIG_IA64)
-	u64 base = screen_info.lfb_base;
-	u64 size = screen_info.lfb_size;
 	struct resource *r;
-	u64 limit;
-
-	/* Select the device owning the boot framebuffer if there is one */
-
-	if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE)
-		base |= (u64)screen_info.ext_lfb_base << 32;
-
-	limit = base + size;
 
 	/* Does firmware framebuffer belong to us? */
 	pci_dev_for_each_resource(pdev, r) {
@@ -581,10 +572,8 @@ static bool vga_is_firmware_default(struct pci_dev *pdev)
 		if (!r->start || !r->end)
 			continue;
 
-		if (base < r->start || limit >= r->end)
-			continue;
-
-		return true;
+		if (aperture_contain_firmware_fb_nonreloc(r->start, r->end))
+			return true;
 	}
 #endif
 	return false;
Signature · 1 line
2.25.1
#4 lore raw

PATCH v3 4/9 PCI/VGA: Improve the default VGA device selection

In reply to Sui Jingfeng

From: Sui Jingfeng <[email protected]>

Currently, the strategy of selecting the default boot on a multiple video card coexistence system is not perfect. Potential problems are:

1) This function is a no-op on non-x86 architectures.
2) It does not take the PCI Bar may get relocated into consideration.
3) It is not effective for the PCI device without a dedicated VRAM Bar.
4) It is device-agnostic, thus it has to waste the effort to iterate all of the PCI Bar to find the VRAM aperture.
5) It has invented lots of methods to determine which one is the default boot device, but this is still a policy because it doesn't give the user a choice to override.

With the observation that device drivers may have better knowledge about which PCI bar contains the firmware FB. This patch tries to solve the above problems by introducing a function callback to the vga_client_register() function interface. DRM device drivers for the PCI device could provide a xx_vga_is_primary_gpu() function callback during the driver loading time. Once the driver binds the device successfully, VRAARB will call back to the driver. This gives the device drivers a chance to provide accurate boot device identification. Which in turn unlock the abitration service to non-x86 architectures. A device driver can also just pass a NULL pointer to keep the original behavior.

This patch is intended to introducing the mechanism only, the specific implementation is left to the authors of various device driver. Also honor the comment: "Clients have *TWO* callback mechanisms they can use"

Cc Alex Deucher <[email protected]>
Cc Christian Konig <[email protected]>
Cc Pan Xinhui <[email protected]>
Cc David Airlie <[email protected]>
Cc Daniel Vetter <[email protected]>
Cc Jani Nikula <[email protected]>
Cc Joonas Lahtinen <[email protected]>
Cc Rodrigo Vivi <[email protected]>
Cc Tvrtko Ursulin <[email protected]>
Cc Ben Skeggs <[email protected]>
Cc Karol Herbst <[email protected]>
Cc Lyude Paul <[email protected]>
Cc Bjorn Helgaas <[email protected]>
Cc Alex Williamson <[email protected]>
Cc Maarten Lankhorst <[email protected]>
Cc Maxime Ripard <[email protected]>
Cc Thomas Zimmermann <[email protected]>
Cc Hawking Zhang <[email protected]>
Cc Mario Limonciello <[email protected]>
Cc Lijo Lazar <[email protected]>
Cc YiPeng Chai <[email protected]>
Cc Bokun Zhang <[email protected]>
Cc Likun Gao <[email protected]>
Cc Ville Syrjala <[email protected]>
Cc Jason Gunthorpe <[email protected]>
CC Kevin Tian <[email protected]>
Cc Cornelia Huck <[email protected]>
Cc Yishai Hadas <[email protected]>
Cc Abhishek Sahu <[email protected]>
Cc Yi Liu <[email protected]>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c |  2 +-
 drivers/gpu/drm/i915/display/intel_vga.c   |  3 +-
 drivers/gpu/drm/loongson/lsdc_drv.c        |  2 +-
 drivers/gpu/drm/nouveau/nouveau_vga.c      |  2 +-
 drivers/gpu/drm/radeon/radeon_device.c     |  2 +-
 drivers/pci/vgaarb.c                       | 55 ++++++++++++++++++++--
 drivers/vfio/pci/vfio_pci_core.c           |  2 +-
 include/linux/vgaarb.h                     |  8 ++--
 8 files changed, 61 insertions(+), 15 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +1 -1
index a92c6189b4b6..d98f0801ac77 100644
@@ -4103,7 +4103,7 @@ int amdgpu_device_init(struct amdgpu_device *adev,
 	/* this will fail for cards that aren't VGA class devices, just
 	 * ignore it */
 	if ((adev->pdev->class >> 8) == PCI_CLASS_DISPLAY_VGA)
-		vga_client_register(adev->pdev, amdgpu_device_vga_set_decode);
+		vga_client_register(adev->pdev, amdgpu_device_vga_set_decode, NULL);
 
 	px = amdgpu_device_supports_px(ddev);
 
drivers/gpu/drm/i915/display/intel_vga.c +1 -2
index 286a0bdd28c6..98d7d4dffe9f 100644
@@ -115,7 +115,6 @@ intel_vga_set_decode(struct pci_dev *pdev, bool enable_decode)
 
 int intel_vga_register(struct drm_i915_private *i915)
 {
-
 	struct pci_dev *pdev = to_pci_dev(i915->drm.dev);
 	int ret;
 
@@ -127,7 +126,7 @@ int intel_vga_register(struct drm_i915_private *i915)
 	 * then we do not take part in VGA arbitration and the
 	 * vga_client_register() fails with -ENODEV.
 	 */
-	ret = vga_client_register(pdev, intel_vga_set_decode);
+	ret = vga_client_register(pdev, intel_vga_set_decode, NULL);
 	if (ret && ret != -ENODEV)
 		return ret;
 
drivers/gpu/drm/loongson/lsdc_drv.c +1 -1
index 188ec82afcfb..d10a28c2c494 100644
@@ -289,7 +289,7 @@ static int lsdc_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	pci_set_drvdata(pdev, ddev);
 
-	vga_client_register(pdev, lsdc_vga_set_decode);
+	vga_client_register(pdev, lsdc_vga_set_decode, NULL);
 
 	drm_kms_helper_poll_init(ddev);
 
drivers/gpu/drm/nouveau/nouveau_vga.c +1 -1
index f8bf0ec26844..162b4f4676c7 100644
@@ -92,7 +92,7 @@ nouveau_vga_init(struct nouveau_drm *drm)
 		return;
 	pdev = to_pci_dev(dev->dev);
 
-	vga_client_register(pdev, nouveau_vga_set_decode);
+	vga_client_register(pdev, nouveau_vga_set_decode, NULL);
 
 	/* don't register Thunderbolt eGPU with vga_switcheroo */
 	if (pci_is_thunderbolt_attached(pdev))
drivers/gpu/drm/radeon/radeon_device.c +1 -1
index afbb3a80c0c6..71f2ff39d6a1 100644
@@ -1425,7 +1425,7 @@ int radeon_device_init(struct radeon_device *rdev,
 	/* if we have > 1 VGA cards, then disable the radeon VGA resources */
 	/* this will fail for cards that aren't VGA class devices, just
 	 * ignore it */
-	vga_client_register(rdev->pdev, radeon_vga_set_decode);
+	vga_client_register(rdev->pdev, radeon_vga_set_decode, NULL);
 
 	if (rdev->flags & RADEON_IS_PX)
 		runtime = true;
drivers/pci/vgaarb.c +50 -5

94 lines not on this page · raw message

drivers/vfio/pci/vfio_pci_core.c +1 -1
index 20d7b69ea6ff..531c4d8ef26e 100644
@@ -2108,7 +2108,7 @@ static int vfio_pci_vga_init(struct vfio_pci_core_device *vdev)
 	if (ret)
 		return ret;
 
-	ret = vga_client_register(pdev, vfio_pci_set_decode);
+	ret = vga_client_register(pdev, vfio_pci_set_decode, NULL);
 	if (ret)
 		return ret;
 	vga_set_legacy_decoding(pdev, vfio_pci_set_decode(pdev, false));
include/linux/vgaarb.h +5 -3
index 97129a1bbb7d..e4102be21f47 100644
@@ -33,7 +33,8 @@ struct pci_dev *vga_default_device(void);
 void vga_set_default_device(struct pci_dev *pdev);
 int vga_remove_vgacon(struct pci_dev *pdev);
 int vga_client_register(struct pci_dev *pdev,
-		unsigned int (*set_decode)(struct pci_dev *pdev, bool state));
+		unsigned int (*set_decode)(struct pci_dev *pdev, bool state),
+		bool (*is_primary_gpu)(struct pci_dev *pdev));
 #else /* CONFIG_VGA_ARB */
 static inline void vga_set_legacy_decoding(struct pci_dev *pdev,
 		unsigned int decodes)
@@ -59,7 +60,8 @@ static inline int vga_remove_vgacon(struct pci_dev *pdev)
 	return 0;
 }
 static inline int vga_client_register(struct pci_dev *pdev,
-		unsigned int (*set_decode)(struct pci_dev *pdev, bool state))
+		unsigned int (*set_decode)(struct pci_dev *pdev, bool state),
+		bool (*is_primary_gpu)(struct pci_dev *pdev))
 {
 	return 0;
 }
@@ -97,7 +99,7 @@ static inline int vga_get_uninterruptible(struct pci_dev *pdev,
 
 static inline void vga_client_unregister(struct pci_dev *pdev)
 {
-	vga_client_register(pdev, NULL);
+	vga_client_register(pdev, NULL, NULL);
 }
 
 #endif /* LINUX_VGA_H */
Signature · 1 line
2.25.1
#5 lore raw

PATCH v3 5/9 drm/amdgpu: Implement the is_primary_gpu callback of vga_client_register()

In reply to Sui Jingfeng

From: Sui Jingfeng <[email protected]>

[why]

The vga_is_firmware_default() function defined in drivers/pci/vgaarb.c is arch-dependent, it's a dummy on non-x86 architectures. This made VGAARB lost an important condition for the arbitration on non-x86 platform. The rules about which GPU is (or should be) the primary display device get used by userspace are obscure on non-x86 platform, let's made the things clear.

[how]

The device that owns the firmware framebuffer should be the default boot device. This patch adds an arch-independent function to implement this rule. The vgaarb subsystem will call back to amdgpu_is_primary_gpu() when drm/amdgpu is bound to an AMDGPU device successfully.

Cc Alex Deucher <[email protected]>
Cc Christian Konig <[email protected]>
Cc Pan Xinhui <[email protected]>
Cc David Airlie <[email protected]>
Cc Daniel Vetter <[email protected]>
Cc Hawking Zhang <[email protected]>
Cc Mario Limonciello <[email protected]>
Cc Lijo Lazar <[email protected]>
Cc YiPeng Chai <[email protected]>
Cc Bokun Zhang <[email protected]>
CC Likun Gao <[email protected]>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +11 -1
index d98f0801ac77..b638eff58636 100644
@@ -3690,6 +3690,15 @@ static void amdgpu_device_set_mcbp(struct amdgpu_device *adev)
 		DRM_INFO("MCBP is enabled\n");
 }
 
+static bool amdgpu_is_primary_gpu(struct pci_dev *pdev)
+{
+	struct drm_device *dev = pci_get_drvdata(pdev);
+	struct amdgpu_device *adev = drm_to_adev(dev);
+	struct amdgpu_gmc *gmc = &adev->gmc;
+
+	return drm_aperture_contain_firmware_fb(gmc->aper_base, gmc->aper_size);
+}
+
 /**
  * amdgpu_device_init - initialize the driver
  *
@@ -4103,7 +4112,8 @@ int amdgpu_device_init(struct amdgpu_device *adev,
 	/* this will fail for cards that aren't VGA class devices, just
 	 * ignore it */
 	if ((adev->pdev->class >> 8) == PCI_CLASS_DISPLAY_VGA)
-		vga_client_register(adev->pdev, amdgpu_device_vga_set_decode, NULL);
+		vga_client_register(adev->pdev, amdgpu_device_vga_set_decode,
+				    amdgpu_is_primary_gpu);
 
 	px = amdgpu_device_supports_px(ddev);
 
Signature · 1 line
2.25.1