colibri_imx6: fix RALAT and WALAT values
PATCH 1/1 colibri_imx6: fix RALAT and WALAT values
From: Stefan Eichenberger <[email protected]>
Running a memtest in U-Boot and Linux shows that some Colibri iMX6 produce bitflips at temperatures above 60°C. This happens because the RALAT and WALAT values on the Colibri iMX6 are too low. The problems were introduced by commit 09dbac8174c4 ("mx6: ddr: Restore ralat/walat in write level calibration") before the calibration process overwrote the values and set them to the maximum value. With this commit, we make sure that the RALAT and WALAT values are set to the maximum values again. This has been proven to work for years.
--- board/toradex/colibri_imx6/colibri_imx6.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
board/toradex/colibri_imx6/colibri_imx6.c +2 -4
@@ -767,8 +767,7 @@ MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333,/* * MDMISC mirroring interleaved (row/bank/col) */ -/* TODO: check what the RALAT field does */ -MX6_MMDC_P0_MDMISC, 0x00081740, +MX6_MMDC_P0_MDMISC, 0x000b17c0,/* * MDSCR con_req
@@ -900,8 +899,7 @@ MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333,/* * MDMISC mirroring interleaved (row/bank/col) */ -/* TODO: check what the RALAT field does */ -MX6_MMDC_P0_MDMISC, 0x00081740, +MX6_MMDC_P0_MDMISC, 0x000b17c0,/* * MDSCR con_req
Signature · 1 line
2.25.1
PATCH 1/1 colibri_imx6: fix RALAT and WALAT values
Quoted 9 lines
From: Stefan Eichenberger <[email protected]> Running a memtest in U-Boot and Linux shows that some Colibri iMX6 produce bitflips at temperatures above 60°C. This happens because the RALAT and WALAT values on the Colibri iMX6 are too low. The problems were introduced by commit
09dbac8174c4("mx6: ddr: Restore ralat/walat in write level calibration") before the calibration process overwrote the values and set them to the maximum value. With this commit, we make sure that the RALAT and WALAT values are set to the maximum values again. This has been proven to work for years.
Quoted 3 lines
Fixes 09dbac8174c4 ("mx6: ddr: Restore ralat/walat in write level calibration")Signed-off-by Stefan Eichenberger <[email protected]>Signed-off-by Francesco Dolcini <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================