Skip to contentSkip to conversation

regmap: Provide user selectable option to enable regmap

PATCH In review Mark Brown 2 participants 3 messages Jul 11, 2023 – Jul 13, 2023

Subsystems (4)
lore
Share & tools
lore

Mark Brown

author maintainer
#0 lore raw

PATCH 1/1 regmap: Provide user selectable option to enable regmap

Since apparently enabling all the KUnit tests shouldn't enable any new subsystems it is hard to enable the regmap KUnit tests in normal KUnit testing scenarios that don't enable any drivers. Add a Kconfig option to help with this and include it in the KUnit all tests config.

---
 drivers/base/regmap/Kconfig                  | 12 +++++++++++-
 tools/testing/kunit/configs/all_tests.config |  2 ++
 2 files changed, 13 insertions(+), 1 deletion(-)
drivers/base/regmap/Kconfig +11 -1
index 0db2021f7477..b1affac70d5d 100644
@@ -4,7 +4,7 @@
 # subsystems should select the appropriate symbols.
 
 config REGMAP
-	bool "Register Map support" if KUNIT_ALL_TESTS
+	bool
 	default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ || REGMAP_SOUNDWIRE || REGMAP_SOUNDWIRE_MBQ || REGMAP_SCCB || REGMAP_I3C || REGMAP_SPI_AVMM || REGMAP_MDIO || REGMAP_FSI)
 	select IRQ_DOMAIN if REGMAP_IRQ
 	select MDIO_BUS if REGMAP_MDIO
@@ -23,6 +23,16 @@ config REGMAP_KUNIT
 	default KUNIT_ALL_TESTS
 	select REGMAP_RAM
 
+config REGMAP_BUILD
+	bool "Enable regmap build"
+	depends on KUNIT
+	select REGMAP
+	help
+	  This option exists purely to allow the regmap KUnit tests to
+	  be enabled without having to enable some driver that uses
+	  regmap due to unfortunate issues with how KUnit tests are
+	  normally enabled.
+
 config REGMAP_AC97
 	tristate
 
tools/testing/kunit/configs/all_tests.config +2 -0
index 0393940c706a..873f3e06ccad 100644
@@ -33,5 +33,7 @@ CONFIG_DAMON_PADDR=y
 CONFIG_DEBUG_FS=y
 CONFIG_DAMON_DBGFS=y
 
+CONFIG_REGMAP_BUILD=y
+
 CONFIG_SECURITY=y
 CONFIG_SECURITY_APPARMOR=y

---
base-commit: 06c2afb862f9da8dc5efa4b6076a0e48c3fbaaa5
change-id: 20230701-regmap-kunit-enable-a08718e77dd4

Best regards,

Signature · 1 line
Mark Brown <[email protected]>
Reviewed-by on v1 1/1
#1 lore raw
Quoted 8 lines · Mark Brown

Since apparently enabling all the KUnit tests shouldn't enable any new subsystems it is hard to enable the regmap KUnit tests in normal KUnit testing scenarios that don't enable any drivers. Add a Kconfig option to help with this and include it in the KUnit all tests config.

---

Thanks: I wasn't totally convinced of the extra CONFIG_REGMAP_BUILD option at first, but having thought about it some more (and seen the ASoC topology one, which has always annoyed me for being a pain to enable), I've come around.

Cheers,
-- David

Quoted 55 lines
 drivers/base/regmap/Kconfig                  | 12 +++++++++++-
 tools/testing/kunit/configs/all_tests.config |  2 ++
 2 files changed, 13 insertions(+), 1 deletion(-)
drivers/base/regmap/Kconfig +11 -1
index 0db2021f7477..b1affac70d5d 100644
@@ -4,7 +4,7 @@
 # subsystems should select the appropriate symbols.
 
 config REGMAP
-       bool "Register Map support" if KUNIT_ALL_TESTS
+       bool
        default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ || REGMAP_SOUNDWIRE || REGMAP_SOUNDWIRE_MBQ || REGMAP_SCCB || REGMAP_I3C || REGMAP_SPI_AVMM || REGMAP_MDIO || REGMAP_FSI)
        select IRQ_DOMAIN if REGMAP_IRQ
        select MDIO_BUS if REGMAP_MDIO
@@ -23,6 +23,16 @@ config REGMAP_KUNIT
        default KUNIT_ALL_TESTS
        select REGMAP_RAM
 
+config REGMAP_BUILD
+       bool "Enable regmap build"
+       depends on KUNIT
+       select REGMAP
+       help
+         This option exists purely to allow the regmap KUnit tests to
+         be enabled without having to enable some driver that uses
+         regmap due to unfortunate issues with how KUnit tests are
+         normally enabled.
+
 config REGMAP_AC97
        tristate
 
tools/testing/kunit/configs/all_tests.config +2 -1
index 0393940c706a..873f3e06ccad 100644
@@ -33,5 +33,7 @@ CONFIG_DAMON_PADDR=y
 CONFIG_DEBUG_FS=y
 CONFIG_DAMON_DBGFS=y
 
+CONFIG_REGMAP_BUILD=y
+
 CONFIG_SECURITY=y
 CONFIG_SECURITY_APPARMOR=y
 
---

base-commit: 06c2afb862f9da8dc5efa4b6076a0e48c3fbaaa5
change-id: 20230701-regmap-kunit-enable-a08718e77dd4

Best regards,
--
Mark Brown <[email protected]>

author maintainer
#2 lore raw
In reply to Mark Brown
Quoted 6 lines · Mark Brown

Since apparently enabling all the KUnit tests shouldn't enable any new subsystems it is hard to enable the regmap KUnit tests in normal KUnit testing scenarios that don't enable any drivers. Add a Kconfig option to help with this and include it in the KUnit all tests config.

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git for-next

Thanks!

[1/1] regmap: Provide user selectable option to enable regmap

      commit: 47ee108a113c72ec8ceee2c7af52c19ed72e6ad7

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark