Skip to contentSkip to conversation

mx7dsabresd: Retrieve the second MAC address from fuses

PATCH New Fabio Estevam 2 participants 2 messages Jul 11, 2023 – Jul 13, 2023

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mx7dsabresd: Retrieve the second MAC address from fuses

From: Fabio Estevam <[email protected]>

Currently, a random MAC address is assigned to eth1 in Linux.

Fix this behavor by retrieving the second MAC address from the fuses.

---
 board/freescale/mx7dsabresd/mx7dsabresd.c | 6 ++++++
 1 file changed, 6 insertions(+)
board/freescale/mx7dsabresd/mx7dsabresd.c +6 -0
index 2777ae13bce0..cff2e6a87171 100644
@@ -292,6 +292,7 @@ int power_init_board(void)
 int board_late_init(void)
 {
 	struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
+	unsigned char eth1addr[6];
 
 	imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
 
@@ -303,6 +304,11 @@ int board_late_init(void)
 	 */
 	clrsetbits_le16(&wdog->wcr, 0, 0x10);
 
+	/* Get the second MAC address */
+	imx_get_mac_from_fuse(1, eth1addr);
+	if (!env_get("eth1addr") && is_valid_ethaddr(eth1addr))
+		eth_env_set_enetaddr("eth1addr", eth1addr);
+
 	return 0;
 }
 
Signature · 1 line
2.34.1
#1 lore raw

PATCH 1/1 mx7dsabresd: Retrieve the second MAC address from fuses

Quoted 4 lines

From: Fabio Estevam <[email protected]>
Currently, a random MAC address is assigned to eth1 in Linux. Fix this behavor by retrieving the second MAC address from the fuses.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================