Skip to contentSkip to conversation

x86: Use qemu-x86_64 to boot EFI installers

PATCH In review Simon Glass 2 participants 60 messages Jul 16, 2023 – Jul 27, 2023

Subsystems (9)
x86 PCI Library code GPIO +5 more subsystems
lore
Share & tools
lore
#0 lore raw

v5 cover x86: Use qemu-x86_64 to boot EFI installers

This series adds various minor features so that qemu-x86_64 can boot the Ubuntu 2022.04 installer using a virtio device:

qemu-system-x86_64 -M pc -drive format=raw,file=root.img
-bios /tmp/b/qemu-x86_64/u-boot.rom
-drive if=virtio,file=ubuntu-22.04.2-desktop-amd64.iso -smp 4 -m 4G -serial mon:stdio

The main changes include:
- Enable video in SPL while running in 32-bit mode
- Drop the duplicate ACPI tables with EFI
- Support PCI autoconfig in SPL
- Support FAT on a CDROM filesystem
- Improved bootstd rules around device tree and efi_set_bootdev()

There are also quite a number of minor tweaks and fixes to make things easier to use.

This series is based on an older version of the SPL-video series from Nikhil M Jain. It is available at u-boot-dm/bryc-working

Changes in v5:
- Make mtrr_type_name[] static
- Fix 'abrievated' typo
- Drop extra space in penultimate example
- Drop unnecessary 'it' in commit message
- Adjust the prompt for clarity (although it is now >12 chars)
- Reword commit message
- Drop unnecessary 'allow' word
- Add tests for bdinfo additions
- Drop extra 'qfw list' line
- Update commit message to explain 'md' reference
- Drop period at end of commit subject
- Drop extra 'a' in commit message
- Add 'bdinfo' tag to commit subject
- Use the existing QEMU code instead
- Use u16 instead of ushort
- Split out banner code into a separate patch
- Drop code to ensure the SPL banner is only shown once
- Fix 'litlle' typo in subject
- Correct indentation
- Add a comment about QFW putting its tables up high
- Add a comment that the bloblist is always in high memory
- Use "gpio" for log return
- Use QEMU instead of qemu
- Drop patch 'Show the number of physical address bits'

Changes in v4:
- Drop patch "video: Allow building video drivers for SPL"
- Drop use of video in SPL

Changes in v3:
- Fix invalid commit IDs obtained from another branch
- Add a tag name for the blob
- Add new patch to refactor table-writing code a ltitle
- Adjust the code to handle qemu writing a pointer to tables in memory

Changes in v2:
- Add new patch with docs for mtrr command
- Add docs to board_init_f_r() too
- Fix BINS typo
- Drop the Ooops string
- Drop ** in strings and use log_err() for messages
- Use log_warning() for the warning
- Handle the case where the tables are in the bloblist
- Add new patch to convert some debug statements to use logging
- Add new patch to support Micron memory
- Add new patch to make sure that the LPC is active before SDRAM init
- Add new patch to support outputing function names in SPL
- Drop patch to set high bits of the mtrr base register, for now
- Bring in to qemu series
- Rebase to -next
- Drop unused of_match
- Fix Boschs typo
- Rename bochs_init_linear_fb() function to drop 'linear'
- Fix uninited variable

Simon Glass (46):
bdinfo: Add tests for serial settings
x86: Return mtrr_add_request() to its old purpose
x86: Allow listing MTRRs in SPL
x86: mtrr: Add documentation
bios_emulator: Add Kconfig and adjust Makefile for SPL
bios_emulator: Drop VIDEO_IO_OFFSET
x86: Tidy up EFI code in interrupt_init()
x86: Add a comment for board_init_f_r_trampoline()
x86: Show the CPU physical address size with bdinfo
x86: Correct get_sp() implementation for 64-bit
x86: Show an error when a BIOS exception occurs
acpi: Add a comment to set the acpi tables
bdinfo: Show the RAM top and approximate stack pointer
part: Allow setting the partition-table type
qfw: Show the file address if available
log: Tidy up an ambiguous comment
qfw: Set the address of the ACPI tables
efi: Show all known UUIDs with CONFIG_CMD_EFIDEBUG
x86: Improve the trampoline in 64-bit mode
bdinfo: Show the malloc base with the bdinfo command
nvme: Provide more useful debugging messages
pci: Support autoconfig in SPL
pci: Allow the video BIOS to work in SPL with QEMU
pci: Tidy up logging and reporting for video BIOS
x86: Allow video-BIOS code to be built for SPL
x86: Pass video settings from SPL to U-Boot proper
x86: Ensure SPL banner is only shown once
x86: Init video in SPL if enabled
pci: Adjust video BIOS debugging to be SPL-friendly
pci: Mask the ROM address in case it is already enabled
x86: Enable display for QEMU 64-bit
x86: Allow logging to be used in SPL reliably
fs: fat: Shrink the size of a few strings
fs: fat: Support reading from a larger block size
x86: Enable useful options for qemu-86_64
x86: Refactor table-writing code a little
x86: Record the start and end of the tables
x86: Convert some debug statements to use logging
x86: link: Support Micron memory
x86: Make sure that the LPC is active before SDRAM init
log: Support outputing function names in SPL
sandbox: Correct header order in board file
sandbox: Install ACPI tables on startup
efi: Use the installed ACPI tables
x86: video: Add a driver for QEMU bochs emulation
x86: Switch QEMU over to use the bochs driver

 arch/sandbox/include/asm/global_data.h    |   4 +
 arch/x86/cpu/i386/interrupt.c             |  17 +--
 arch/x86/cpu/intel_common/mrc.c           |  10 +-
 arch/x86/cpu/ivybridge/sdram.c            |   4 +-
 arch/x86/cpu/mtrr.c                       |  67 +++++++++-
 arch/x86/cpu/qemu/Kconfig                 |   2 +-
 arch/x86/cpu/qemu/qemu.c                  |   5 +-
 arch/x86/cpu/start64.S                    |  19 +++
 arch/x86/dts/chromebook_link.dts          |   1 +
 arch/x86/include/asm/global_data.h        |   4 +
 arch/x86/include/asm/mtrr.h               |  20 +++
 arch/x86/include/asm/u-boot-x86.h         |  27 +++-
 arch/x86/lib/Makefile                     |   7 +-
 arch/x86/lib/bdinfo.c                     |   5 +
 arch/x86/lib/bios.c                       |   4 +-
 arch/x86/lib/bootm.c                      |   2 +-
 arch/x86/lib/mrccache.c                   |   6 +-
 arch/x86/lib/spl.c                        |  68 ++++++++--
 arch/x86/lib/tables.c                     |  46 +++++--
 board/google/Kconfig                      |   7 -
 board/sandbox/sandbox.c                   |  22 +++-
 cmd/Kconfig                               |   8 ++
 cmd/acpi.c                                |  24 +++-
 cmd/bdinfo.c                              |   6 +
 cmd/part.c                                |  34 +++++
 cmd/qfw.c                                 |   2 +-
 cmd/x86/mtrr.c                            |  60 +--------
 common/bloblist.c                         |   1 +
 common/board_f.c                          |  12 +-
 common/board_r.c                          |   7 +-
 common/log.c                              |   2 +-
 common/log_console.c                      |  10 +-
 configs/qemu-x86_64_defconfig             |  16 ++-
 configs/qemu-x86_defconfig                |   3 -
 disk/part.c                               |  16 +++
 doc/usage/cmd/acpi.rst                    |  29 ++++-
 doc/usage/cmd/mtrr.rst                    | 151 ++++++++++++++++++++++
 doc/usage/cmd/part.rst                    |  74 +++++++++++
 doc/usage/cmd/qfw.rst                     |  27 ++--
 doc/usage/index.rst                       |   1 +
 drivers/Kconfig                           |   2 +
 drivers/Makefile                          |   2 +-
 drivers/bios_emulator/Kconfig             |  10 ++
 drivers/bios_emulator/biosemui.h          |  18 +--
 drivers/bios_emulator/x86emu/sys.c        |   1 +
 drivers/gpio/intel_ich6_gpio.c            |   5 +-
 drivers/misc/qfw.c                        |  13 ++
 drivers/nvme/nvme.c                       |  36 ++++--
 drivers/pch/pch9.c                        |   6 +-
 drivers/pci/Kconfig                       |   5 +
 drivers/pci/pci-uclass.c                  |  10 +-
 drivers/pci/pci_rom.c                     | 124 ++++++++++++------
 drivers/video/Kconfig                     |  30 +++++
 drivers/video/Makefile                    |   1 +
 drivers/video/bochs.c                     | 123 ++++++++++++++++++
 drivers/video/bochs.h                     |  36 ++++++
 fs/fat/Kconfig                            |  13 ++
 fs/fat/fat.c                              | 121 ++++++++++++++---
 fs/fat/fat_write.c                        |  22 ++--
 include/asm-generic/global_data.h         |  13 ++
 include/bloblist.h                        |   1 +
 include/configs/conga-qeval20-qa3-e3845.h |   2 -
 include/configs/dfi-bt700.h               |   2 -
 include/configs/minnowmax.h               |   2 -
 include/configs/som-db5800-som-6867.h     |   2 -
 include/configs/theadorable-x86-common.h  |   2 -
 include/configs/x86-chromebook.h          |   2 -
 include/part.h                            |   9 ++
 include/qemu.h                            |  14 ++
 include/video.h                           |  24 ++++
 lib/efi_loader/efi_acpi.c                 |  33 +++--
 lib/uuid.c                                |   2 +-
 test/cmd/bdinfo.c                         |  21 +++
 test/dm/acpi.c                            |  38 ++++++
 74 files changed, 1299 insertions(+), 276 deletions(-)
 create mode 100644 doc/usage/cmd/mtrr.rst
 create mode 100644 drivers/bios_emulator/Kconfig
 create mode 100644 drivers/video/bochs.c
 create mode 100644 drivers/video/bochs.h
 create mode 100644 include/qemu.h
Signature · 1 line
2.41.0.455.g037347b96a-goog
#1 lore raw

PATCH v5 1/46 bdinfo: Add tests for serial settings

Since the original patch was written, tests have been added for the 'bdinfo' command. Add the missing pieces so that the tests pass.

Fixes 68130503fbd ("bdinfo: Show information about the serial port")

---

(no changes since v1)

 test/cmd/bdinfo.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
test/cmd/bdinfo.c +14 -0
index cddf1a46d491..6480393fd5d8 100644
@@ -16,6 +16,7 @@
 #include <env.h>
 #include <lmb.h>
 #include <net.h>
+#include <serial.h>
 #include <video.h>
 #include <vsprintf.h>
 #include <asm/cache.h>
@@ -191,6 +192,19 @@ static int bdinfo_test_move(struct unit_test_state *uts)
 			ut_assert_nextline("devicetree  = %s", fdtdec_get_srcname());
 	}
 
+	if (IS_ENABLED(CONFIG_DM_SERIAL)) {
+		struct serial_device_info info;
+
+		ut_assertnonnull(gd->cur_serial_dev);
+		ut_assertok(serial_getinfo(gd->cur_serial_dev, &info));
+
+		ut_assertok(test_num_l(uts, "serial addr", info.addr));
+		ut_assertok(test_num_l(uts, " width", info.reg_width));
+		ut_assertok(test_num_l(uts, " shift", info.reg_shift));
+		ut_assertok(test_num_l(uts, " offset", info.reg_offset));
+		ut_assertok(test_num_l(uts, " clock", info.clock));
+	}
+
 	ut_assertok(ut_check_console_end(uts));
 
 	return 0;
Signature · 1 line
2.41.0.455.g037347b96a-goog
#2 lore raw

Re: [PATCH v5 01/46] bdinfo: Add tests for serial settings

Hi Simon,

Quoted 4 lines · Simon Glass

Since the original patch was written, tests have been added for the 'bdinfo' command. Add the missing pieces so that the tests pass.

Quoted 9 lines
Fixes 68130503fbd ("bdinfo: Show information about the serial port")

---

(no changes since v1)

 test/cmd/bdinfo.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Squashed in https://patchwork.ozlabs.org/project/uboot/patch/20230712090445.v3.8.Id05e096ed6874145d14d9ee428fc25c0611bd84f@changeid/
to fix the CI failures on Sandbox.

Regards,
Bin

#3 lore raw

PATCH v5 2/46 x86: Return mtrr_add_request() to its old purpose

In reply to Simon Glass

This function used to be for adding a list of requests to be actioned on relocation. Revert it back to this purpose, to avoid problems with boards which need control of their MTRRs (i.e. those which don't use FSP).

The mtrr_set_next_var() function is available when the next free variable-MTRR must be set, so this can be used instead.

Fixes 3bcd6cf89ef ("x86: mtrr: Skip MSRs that were already programmed..")
Fixes 596bd0589ad ("x86: mtrr: Do not clear the unused ones..")

---

(no changes since v3)

Changes in v3:
- Fix invalid commit IDs obtained from another branch

 arch/x86/cpu/mtrr.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
arch/x86/cpu/mtrr.c +5 -1
index e69dfb552b16..c174dd9b3ad2 100644
@@ -156,8 +156,12 @@ int mtrr_commit(bool do_caches)
 	debug("open done\n");
 	qsort(req, gd->arch.mtrr_req_count, sizeof(*req), h_comp_mtrr);
 	for (i = 0; i < gd->arch.mtrr_req_count; i++, req++)
-		mtrr_set_next_var(req->type, req->start, req->size);
+		set_var_mtrr(i, req->type, req->start, req->size);
 
+	/* Clear the ones that are unused */
+	debug("clear\n");
+	for (; i < mtrr_get_var_count(); i++)
+		wrmsrl(MTRR_PHYS_MASK_MSR(i), 0);
 	debug("close\n");
 	mtrr_close(&state, do_caches);
 	debug("mtrr done\n");
Signature · 1 line
2.41.0.455.g037347b96a-goog
Reviewed-by on v5 2/46
#4 lore raw

Re: [PATCH v5 02/46] x86: Return mtrr_add_request() to its old purpose

Quoted 13 lines · Simon Glass

This function used to be for adding a list of requests to be actioned on relocation. Revert it back to this purpose, to avoid problems with boards which need control of their MTRRs (i.e. those which don't use FSP).

The mtrr_set_next_var() function is available when the next free variable-MTRR must be set, so this can be used instead.

Fixes 3bcd6cf89ef ("x86: mtrr: Skip MSRs that were already programmed..")
Fixes 596bd0589ad ("x86: mtrr: Do not clear the unused ones..")

---

Quoted 8 lines

(no changes since v3)

Changes in v3:
- Fix invalid commit IDs obtained from another branch

 arch/x86/cpu/mtrr.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

I will include this patch in my mtrr series.

Regards,
Bin

#5 lore raw

PATCH v5 3/46 x86: Allow listing MTRRs in SPL

In reply to Simon Glass

Move MTRR-listing code into a common file so it can be used from SPL. Update the 'mtrr' command to call it.

Use this in SPL just before adjusting the MTRRs, so we can see the state set up by the board. Only show it when debug is enabled.

---

Changes in v5:
- Make mtrr_type_name[] static

 arch/x86/cpu/mtrr.c         | 61 +++++++++++++++++++++++++++++++++++++
 arch/x86/include/asm/mtrr.h | 20 ++++++++++++
 arch/x86/lib/spl.c          |  7 +++++
 cmd/x86/mtrr.c              | 60 +++---------------------------------
 4 files changed, 92 insertions(+), 56 deletions(-)
arch/x86/cpu/mtrr.c +61 -0
index c174dd9b3ad2..9c24ae984e90 100644
@@ -30,6 +30,16 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static const char *const mtrr_type_name[MTRR_TYPE_COUNT] = {
+	"Uncacheable",
+	"Combine",
+	"2",
+	"3",
+	"Through",
+	"Protect",
+	"Back",
+};
+
 /* Prepare to adjust MTRRs */
 void mtrr_open(struct mtrr_state *state, bool do_caches)
 {
@@ -324,3 +334,54 @@ int mtrr_set(int cpu_select, int reg, u64 base, u64 mask)
 
 	return mtrr_start_op(cpu_select, &oper);
 }
+
+static void read_mtrrs_(void *arg)
+{
+	struct mtrr_info *info = arg;
+
+	mtrr_read_all(info);
+}
+
+int mtrr_list(int reg_count, int cpu_select)
+{
+	struct mtrr_info info;
+	int ret;
+	int i;
+
+	printf("Reg Valid Write-type   %-16s %-16s %-16s\n", "Base   ||",
+	       "Mask   ||", "Size   ||");
+	memset(&info, '\0', sizeof(info));
+	ret = mp_run_on_cpus(cpu_select, read_mtrrs_, &info);
+	if (ret)
+		return log_msg_ret("run", ret);
+	for (i = 0; i < reg_count; i++) {
+		const char *type = "Invalid";
+		u64 base, mask, size;
+		bool valid;
+
+		base = info.mtrr[i].base;
+		mask = info.mtrr[i].mask;
+		size = ~mask & ((1ULL << CONFIG_CPU_ADDR_BITS) - 1);
+		size |= (1 << 12) - 1;
+		size += 1;
+		valid = mask & MTRR_PHYS_MASK_VALID;
+		type = mtrr_type_name[base & MTRR_BASE_TYPE_MASK];
+		printf("%d   %-5s %-12s %016llx %016llx %016llx\n", i,
+		       valid ? "Y" : "N", type, base & ~MTRR_BASE_TYPE_MASK,
+		       mask & ~MTRR_PHYS_MASK_VALID, size);
+	}
+
+	return 0;
+}
+
+int mtrr_get_type_by_name(const char *typename)
+{
+	int i;
+
+	for (i = 0; i < MTRR_TYPE_COUNT; i++) {
+		if (*typename == *mtrr_type_name[i])
+			return i;
+	}
+
+	return -EINVAL;
+};
arch/x86/include/asm/mtrr.h +20 -0
index ca2edc7878f7..2e995f540616 100644
@@ -190,6 +190,26 @@ int mtrr_set(int cpu_select, int reg, u64 base, u64 mask);
  */
 int mtrr_get_var_count(void);
 
+/**
+ * mtrr_list() - List the MTRRs
+ *
+ * Shows a list of all the MTRRs including their values
+ *
+ * @reg_count: Number of registers to show. You can use mtrr_get_var_count() for
+ * this
+ * @cpu_select: CPU to use. Use MP_SELECT_BSP for the boot CPU
+ * Returns: 0 if OK, -ve if the CPU was not found
+ */
+int mtrr_list(int reg_count, int cpu_select);
+
+/**
+ * mtrr_get_type_by_name() - Get the type of an MTRR given its type name
+ *
+ * @typename: Name to check
+ * Returns: MTRR type (MTRR_TYPE_...) or -EINVAL if invalid
+ */
+int mtrr_get_type_by_name(const char *typename);
+
 #endif
 
 #if ((CONFIG_XIP_ROM_SIZE & (CONFIG_XIP_ROM_SIZE - 1)) != 0)
arch/x86/lib/spl.c +7 -0
index ca1645f9d687..b9d23e6bfe18 100644
@@ -19,6 +19,7 @@
 #include <asm/cpu_common.h>
 #include <asm/fsp2/fsp_api.h>
 #include <asm/global_data.h>
+#include <asm/mp.h>
 #include <asm/mrccache.h>
 #include <asm/mtrr.h>
 #include <asm/pci.h>
@@ -139,6 +140,12 @@ static int x86_spl_init(void)
 	arch_setup_gd(gd->new_gd);
 	gd->start_addr_sp = (ulong)ptr;
 
+	if (_LOG_DEBUG) {
+		ret = mtrr_list(mtrr_get_var_count(), MP_SELECT_BSP);
+		if (ret)
+			printf("mtrr_list failed\n");
+	}
+
 	/* Cache the SPI flash. Otherwise copying the code to RAM takes ages */
 	ret = mtrr_add_request(MTRR_TYPE_WRBACK,
 			       (1ULL << 32) - CONFIG_XIP_ROM_SIZE,
cmd/x86/mtrr.c +4 -56

82 lines not on this page · raw message

Signature · 1 line
2.41.0.455.g037347b96a-goog
#6 lore raw

PATCH v5 4/46 x86: mtrr: Add documentation

In reply to Simon Glass

Add documention for the x86 'mtrr' command.

---

Changes in v5:
- Fix 'abrievated' typo
- Drop extra space in penultimate example

Changes in v2:
- Add new patch with docs for mtrr command

 doc/usage/cmd/mtrr.rst | 151 +++++++++++++++++++++++++++++++++++++++++
 doc/usage/index.rst    |   1 +
 2 files changed, 152 insertions(+)
 create mode 100644 doc/usage/cmd/mtrr.rst
doc/usage/cmd/mtrr.rst new file +151 -0
new file mode 100644
index 000000000000..531153bb3e23
@@ -0,0 +1,151 @@
+.. SPDX-License-Identifier: GPL-2.0+:
+
+mtrr command
+============
+
+Synopis
+-------
+
+    mtrr [list]
+    mtrr set <reg> <type> <start> <size>
+    mtrr disable <reg>
+    mtrr enable
+
+
+Description
+-----------
+
+The *mtrr* command is used to dump the Memory Type Range Registers (MTRRs) on
+an x86 machine. These register control cache behaviour in selected memory
+ranges.
+
+Note that the number of registers can vary between CPUs.
+
+
+mtrr [list]
+~~~~~~~~~~~
+
+List the MTRRs. The table shows the following information:
+
+Reg
+    Register number (the first is register 0)
+
+Valid
+    Shows Y if the register is valid (has bit 11 set), N if not
+
+Write-type
+    Shows the behaviour when writing to the memory region. The types are
+    abbreviated to fit a reasonable line length. Valid types shown below.
+
+    ======  ==============  ====================================================
+    Value   Type            Meaning
+    ======  ==============  ====================================================
+    0       Uncacheable     Skip cache and write directly to memory
+    1       Combine         Multiple writes can be combined into one transaction
+    4       Through         Update cache and also write to memory
+    5       Protect         Writes are prohibited
+    6       Back            Update cache but don't write to memory
+    ======  ==============  ====================================================
+
+Base
+    Base memory address from which the register controls behaviour
+
+Mask
+    Mask value, which also indicates the size
+
+Size
+    Length of memory region within which the register controls behaviour
+
+
+mtrr set
+~~~~~~~~
+
+This sets the value of a particular MTRR. Parameters are:
+
+reg
+    Register number to set, with 0 being the first
+
+type
+    Access type to set. See Write-type above for valid types. This uses the name
+    rather than its numeric value.
+
+start
+    Base memory address from which the register should control behaviour
+
+size
+    Length of memory region within which the register controls behaviour
+
+
+mtrr disable
+~~~~~~~~~~~~
+
+This disables a particular register, by clearing its `valid` bit (11).
+
+
+mtrr enable
+~~~~~~~~~~~
+
+This enables a particular register, by setting its `valid` bit (11).
+
+
+Example
+-------
+
+This shows disabling and enabling an MTRR, as well as setting its type::
+
+    => mtrr
+    CPU 0:
+    Reg Valid Write-type   Base   ||        Mask   ||        Size   ||
+    0   Y     Back         0000000000000000 0000000f80000000 0000000080000000
+    1   Y     Back         0000000080000000 0000000fe0000000 0000000020000000
+    2   Y     Back         00000000a0000000 0000000ff0000000 0000000010000000
+    3   Y     Uncacheable  00000000ad000000 0000000fff000000 0000000001000000
+    4   Y     Uncacheable  00000000ae000000 0000000ffe000000 0000000002000000
+    5   Y     Combine      00000000d0000000 0000000ff0000000 0000000010000000
+    6   N     Uncacheable  0000000000000000 0000000000000000 0000001000000000
+    7   N     Uncacheable  0000000000000000 0000000000000000 0000001000000000
+    8   N     Uncacheable  0000000000000000 0000000000000000 0000001000000000
+    9   N     Uncacheable  0000000000000000 0000000000000000 0000001000000000
+    => mtrr d 5
+    => mtrr
+    CPU 0:
+    Reg Valid Write-type   Base   ||        Mask   ||        Size   ||
+    0   Y     Back         0000000000000000 0000000f80000000 0000000080000000
+    1   Y     Back         0000000080000000 0000000fe0000000 0000000020000000
+    2   Y     Back         00000000a0000000 0000000ff0000000 0000000010000000
+    3   Y     Uncacheable  00000000ad000000 0000000fff000000 0000000001000000
+    4   Y     Uncacheable  00000000ae000000 0000000ffe000000 0000000002000000
+    5   N     Combine      00000000d0000000 0000000ff0000000 0000000010000000
+    6   N     Uncacheable  0000000000000000 0000000000000000 0000001000000000
+    7   N     Uncacheable  0000000000000000 0000000000000000 0000001000000000
+    8   N     Uncacheable  0000000000000000 0000000000000000 0000001000000000
+    9   N     Uncacheable  0000000000000000 0000000000000000 0000001000000000
+    => mtrr e 5
+    => mtrr
+    CPU 0:
+    Reg Valid Write-type   Base   ||        Mask   ||        Size   ||
+    0   Y     Back         0000000000000000 0000000f80000000 0000000080000000
+    1   Y     Back         0000000080000000 0000000fe0000000 0000000020000000
+    2   Y     Back         00000000a0000000 0000000ff0000000 0000000010000000
+    3   Y     Uncacheable  00000000ad000000 0000000fff000000 0000000001000000
+    4   Y     Uncacheable  00000000ae000000 0000000ffe000000 0000000002000000
+    5   Y     Combine      00000000d0000000 0000000ff0000000 0000000010000000
+    6   N     Uncacheable  0000000000000000 0000000000000000 0000001000000000
+    7   N     Uncacheable  0000000000000000 0000000000000000 0000001000000000
+    8   N     Uncacheable  0000000000000000 0000000000000000 0000001000000000
+    9   N     Uncacheable  0000000000000000 0000000000000000 0000001000000000
+    => mtrr set 5 Uncacheable d0000000 10000000
+    => mtrr
+    CPU 0:
+    Reg Valid Write-type   Base   ||        Mask   ||        Size   ||
+    0   Y     Back         0000000000000000 0000000f80000000 0000000080000000
+    1   Y     Back         0000000080000000 0000000fe0000000 0000000020000000
+    2   Y     Back         00000000a0000000 0000000ff0000000 0000000010000000
+    3   Y     Uncacheable  00000000ad000000 0000000fff000000 0000000001000000
+    4   Y     Uncacheable  00000000ae000000 0000000ffe000000 0000000002000000
+    5   Y     Uncacheable  00000000d0000000 0000000ff0000000 0000000010000000
+    6   N     Uncacheable  0000000000000000 0000000000000000 0000001000000000
+    7   N     Uncacheable  0000000000000000 0000000000000000 0000001000000000
+    8   N     Uncacheable  0000000000000000 0000000000000000 0000001000000000
+    9   N     Uncacheable  0000000000000000 0000000000000000 0000001000000000
+    =>
doc/usage/index.rst +1 -0
index f2ffd2787aa8..072db53614c5 100644
@@ -76,6 +76,7 @@ Shell commands
    cmd/md
    cmd/mmc
    cmd/mtest
+   cmd/mtrr
    cmd/panic
    cmd/part
    cmd/pause
Signature · 1 line
2.41.0.455.g037347b96a-goog
#7 lore raw

PATCH v5 5/46 bios_emulator: Add Kconfig and adjust Makefile for SPL

In reply to Simon Glass

The Kconfig for this is currently inside a particular board. Move it into the correct place and allow use in SPL, so that video can be used there if needed.

---

(no changes since v1)

 board/google/Kconfig          |  7 -------
 drivers/Kconfig               |  2 ++
 drivers/Makefile              |  2 +-
 drivers/bios_emulator/Kconfig | 10 ++++++++++
 4 files changed, 13 insertions(+), 8 deletions(-)
 create mode 100644 drivers/bios_emulator/Kconfig
board/google/Kconfig +0 -7
index a0f1a6097641..e4f9b5b68aab 100644
@@ -4,13 +4,6 @@
 
 if VENDOR_GOOGLE
 
-config BIOSEMU
-	bool
-	select X86EMU_RAW_IO
-
-config X86EMU_RAW_IO
-	bool
-
 choice
 	prompt "Mainboard model"
 	optional
drivers/Kconfig +2 -0
index 75937fbb6d9b..a25f6ae02fdf 100644
@@ -10,6 +10,8 @@ source "drivers/ata/Kconfig"
 
 source "drivers/axi/Kconfig"
 
+source "drivers/bios_emulator/Kconfig"
+
 source "drivers/bus/Kconfig"
 
 source "drivers/block/Kconfig"
drivers/Makefile +1 -1
index 78dcf62f76af..3bc6d279d7cb 100644
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0+
 
+obj-$(CONFIG_$(SPL_TPL_)BIOSEMU) += bios_emulator/
 obj-$(CONFIG_$(SPL_TPL_)BLK) += block/
 obj-$(CONFIG_$(SPL_TPL_)BOOTCOUNT_LIMIT) += bootcount/
 obj-$(CONFIG_$(SPL_TPL_)BUTTON) += button/
@@ -80,7 +81,6 @@ ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
 obj-y += adc/
 obj-y += ata/
 obj-$(CONFIG_DM_DEMO) += demo/
-obj-$(CONFIG_BIOSEMU) += bios_emulator/
 obj-y += block/
 obj-y += cache/
 obj-$(CONFIG_CPU) += cpu/
drivers/bios_emulator/Kconfig new file +10 -0
new file mode 100644
index 000000000000..3660576772d1
@@ -0,0 +1,10 @@
+config BIOSEMU
+	bool
+	select X86EMU_RAW_IO
+
+config SPL_BIOSEMU
+	bool
+	select X86EMU_RAW_IO
+
+config X86EMU_RAW_IO
+	bool
Signature · 1 line
2.41.0.455.g037347b96a-goog
#8 lore raw

PATCH v5 6/46 bios_emulator: Drop VIDEO_IO_OFFSET

In reply to Simon Glass

This is always zero in the source tree, so drop it.

While we are here, add a comment to _X86EMU_env since the symbol is actually defined twice, which can cause confusion when building.

---

Changes in v5:
- Drop unnecessary 'it' in commit message

 drivers/bios_emulator/biosemui.h          | 18 +++++++++---------
 drivers/bios_emulator/x86emu/sys.c        |  1 +
 include/configs/conga-qeval20-qa3-e3845.h |  2 --
 include/configs/dfi-bt700.h               |  2 --
 include/configs/minnowmax.h               |  2 --
 include/configs/som-db5800-som-6867.h     |  2 --
 include/configs/theadorable-x86-common.h  |  2 --
 include/configs/x86-chromebook.h          |  2 --
 8 files changed, 10 insertions(+), 21 deletions(-)
drivers/bios_emulator/biosemui.h +9 -9
index 7853015c1e2e..954cd883158c 100644
@@ -128,19 +128,19 @@ typedef struct {
 	u32 finalVal;
 } BE_portInfo;
 
-#define PM_inpb(port)	inb(port+VIDEO_IO_OFFSET)
-#define PM_inpw(port)	inw(port+VIDEO_IO_OFFSET)
-#define PM_inpd(port)	inl(port+VIDEO_IO_OFFSET)
-#define PM_outpb(port,val)	outb(val,port+VIDEO_IO_OFFSET)
-#define PM_outpw(port,val)	outw(val,port+VIDEO_IO_OFFSET)
-#define PM_outpd(port,val)	outl(val,port+VIDEO_IO_OFFSET)
+#define PM_inpb(port)	inb(port)
+#define PM_inpw(port)	inw(port)
+#define PM_inpd(port)	inl(port)
+#define PM_outpb(port, val)	outb(val, port)
+#define PM_outpw(port, val)	outw(val, port)
+#define PM_outpd(port, val)	outl(val, port)
 
 #define LOG_inpb(port)	PM_inpb(port)
 #define LOG_inpw(port)	PM_inpw(port)
 #define LOG_inpd(port)	PM_inpd(port)
-#define LOG_outpb(port,val)	PM_outpb(port,val)
-#define LOG_outpw(port,val)	PM_outpw(port,val)
-#define LOG_outpd(port,val)	PM_outpd(port,val)
+#define LOG_outpb(port, val)	PM_outpb(port, val)
+#define LOG_outpw(port, val)	PM_outpw(port, val)
+#define LOG_outpd(port, val)	PM_outpd(port, val)
 
 /*-------------------------- Function Prototypes --------------------------*/
 
drivers/bios_emulator/x86emu/sys.c +1 -0
index c2db1213fe66..882a8a34cc3e 100644
@@ -44,6 +44,7 @@
 
 /*------------------------- Global Variables ------------------------------*/
 
+/* Note: bios.c defines this if the emulator is not enabled */
 X86EMU_sysEnv _X86EMU_env;	/* Global emulator machine state */
 X86EMU_intrFuncs _X86EMU_intrTab[256];
 
include/configs/conga-qeval20-qa3-e3845.h +0 -2
index 60617e6fec25..03c364f29fb3 100644
@@ -16,8 +16,6 @@
 					"stdout=serial\0" \
 					"stderr=serial\0"
 
-#define VIDEO_IO_OFFSET				0
-
 #undef CFG_EXTRA_ENV_SETTINGS
 #define CFG_EXTRA_ENV_SETTINGS				\
 	"kernel-ver=4.4.0-22\0"					\
include/configs/dfi-bt700.h +0 -2
index 05389a435bee..be095e28a1b4 100644
@@ -20,8 +20,6 @@
 					"stdout=serial\0" \
 					"stderr=serial\0"
 
-#define VIDEO_IO_OFFSET				0
-
 #undef CFG_EXTRA_ENV_SETTINGS
 #define CFG_EXTRA_ENV_SETTINGS				\
 	"kernel-ver=4.4.0-24\0"					\
include/configs/minnowmax.h +0 -2
index 4a12c2f72c62..842672d55751 100644
@@ -17,6 +17,4 @@
 					"stderr=vidconsole,serial\0" \
 					"usb_pgood_delay=40\0"
 
-#define VIDEO_IO_OFFSET				0
-
 #endif	/* __CONFIG_H */
include/configs/som-db5800-som-6867.h +0 -2
index b2e7aa1514c0..5f7eabd3fc64 100644
@@ -16,6 +16,4 @@
 					"stdout=serial,vidconsole\0" \
 					"stderr=serial,vidconsole\0"
 
-#define VIDEO_IO_OFFSET				0
-
 #endif	/* __CONFIG_H */
include/configs/theadorable-x86-common.h +0 -2
index b23b8783076b..46aef238213a 100644
@@ -15,8 +15,6 @@
 					"stdout=serial\0" \
 					"stderr=serial\0"
 
-#define VIDEO_IO_OFFSET				0
-
 /* Environment settings */
 
 #undef CFG_EXTRA_ENV_SETTINGS
include/configs/x86-chromebook.h +0 -2
index 98abb00927ad..6bf90c7de432 100644
@@ -10,8 +10,6 @@
 #define CFG_X86_REFCODE_ADDR			0xffea0000
 #define CFG_X86_REFCODE_RUN_ADDR		0
 
-#define VIDEO_IO_OFFSET				0
-
 #define CFG_STD_DEVICES_SETTINGS	"stdin=usbkbd,i8042-kbd,serial\0" \
 					"stdout=vidconsole,serial\0" \
 					"stderr=vidconsole,serial\0"
Signature · 1 line
2.41.0.455.g037347b96a-goog
#9 lore raw

PATCH v5 7/46 x86: Tidy up EFI code in interrupt_init()

In reply to Simon Glass

The ll_boot_init() check handles the EFI case so we don't need the rest of the code. Drop it.

---

(no changes since v1)

 arch/x86/cpu/i386/interrupt.c | 17 +++++------------
 1 file changed, 5 insertions(+), 12 deletions(-)
arch/x86/cpu/i386/interrupt.c +5 -12
index fae2544c456f..f3f3527237f2 100644
@@ -266,6 +266,10 @@ int interrupt_init(void)
 	struct udevice *dev;
 	int ret;
 
+	/*
+	 * When running as an EFI application we are not in control of
+	 * interrupts and should leave them alone.
+	 */
 	if (!ll_boot_init())
 		return 0;
 
@@ -274,11 +278,6 @@ int interrupt_init(void)
 	if (ret && ret != -ENODEV)
 		return ret;
 
-	/*
-	 * When running as an EFI application we are not in control of
-	 * interrupts and should leave them alone.
-	 */
-#ifndef CONFIG_EFI_APP
 	/* Just in case... */
 	disable_interrupts();
 
@@ -294,14 +293,8 @@ int interrupt_init(void)
 	/* Initialize core interrupt and exception functionality of CPU */
 	cpu_init_interrupts();
 
-	/*
-	 * It is now safe to enable interrupts.
-	 *
-	 * TODO([email protected]): But we don't handle these correctly when
-	 * booted from EFI.
-	 */
+	/* It is now safe to enable interrupts */
 	enable_interrupts();
-#endif
 
 	return 0;
 }
Signature · 1 line
2.41.0.455.g037347b96a-goog
#10 lore raw

PATCH v5 8/46 x86: Add a comment for board_init_f_r_trampoline()

In reply to Simon Glass

Add a comment for this function in the header.

Change the function (and the one after) to use __noreturn to keep checkpatch happy.

Add docs to board_init_f_r() while we are here.

---

(no changes since v2)

Changes in v2:
- Add docs to board_init_f_r() too

 arch/x86/include/asm/u-boot-x86.h | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
arch/x86/include/asm/u-boot-x86.h +14 -2
index 8f38c2d1c601..1d8aa320f535 100644
@@ -102,8 +102,20 @@ int video_bios_init(void);
  */
 int fsp_save_s3_stack(void);
 
-void	board_init_f_r_trampoline(ulong) __attribute__ ((noreturn));
-void	board_init_f_r(void) __attribute__ ((noreturn));
+/**
+ * board_init_f_r_trampoline() - jump to relocated address with new stack
+ *
+ * @sp: New stack pointer to use
+ */
+void __noreturn board_init_f_r_trampoline(ulong sp);
+
+/**
+ * board_init_f_r() - jump to relocated U-Boot
+ *
+ * This is used to jump from pre-relocation to post-relocation U-Boot. It
+ * enables the cache and jump to the new location.
+ */
+void __noreturn board_init_f_r(void);
 
 int arch_misc_init(void);
 
Signature · 1 line
2.41.0.455.g037347b96a-goog
#11 lore raw

PATCH v5 9/46 x86: Show the CPU physical address size with bdinfo

In reply to Simon Glass

This is useful information so show it with the bdinfo command.

---

Changes in v5:
- Adjust the prompt for clarity (although it is now >12 chars)

 arch/x86/lib/bdinfo.c | 1 +
 1 file changed, 1 insertion(+)
arch/x86/lib/bdinfo.c +1 -0
index 15390070fe85..a20d0954416a 100644
@@ -22,6 +22,7 @@ void arch_print_bdinfo(void)
 	bdinfo_print_num_l("vendor", gd->arch.x86_vendor);
 	bdinfo_print_str(" name", cpu_vendor_name(gd->arch.x86_vendor));
 	bdinfo_print_num_l("model", gd->arch.x86_model);
+	bdinfo_print_num_l("phys_addr in bits", cpu_phys_address_size());
 
 	if (IS_ENABLED(CONFIG_EFI_STUB))
 		efi_show_bdinfo();
Signature · 1 line
2.41.0.455.g037347b96a-goog
Reviewed-by on v5 9/46
#12 lore raw

Re: [PATCH v5 09/46] x86: Show the CPU physical address size with bdinfo

Quoted 9 lines · Simon Glass

This is useful information so show it with the bdinfo command.

---

Changes in v5:
- Adjust the prompt for clarity (although it is now >12 chars)

#13 lore raw

PATCH v5 10/46 x86: Correct get_sp() implementation for 64-bit

In reply to Simon Glass

Use an assembler implementation as is done for i386, so that the results are equivalent for i386 and x86_64.

---

Changes in v5:
- Reword commit message

 arch/x86/lib/bootm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/lib/bootm.c +1 -1
index 61cb7bc61168..3196f9ddc2c8 100644
@@ -258,7 +258,7 @@ static ulong get_sp(void)
 	ulong ret;
 
 #if CONFIG_IS_ENABLED(X86_64)
-	ret = gd->start_addr_sp;
+	asm("mov %%rsp, %0" : "=r"(ret) : );
 #else
 	asm("mov %%esp, %0" : "=r"(ret) : );
 #endif
Signature · 1 line
2.41.0.455.g037347b96a-goog
Reviewed-by on v5 10/46
#14 lore raw

Re: [PATCH v5 10/46] x86: Correct get_sp() implementation for 64-bit

Quoted 4 lines · Simon Glass

Use an assembler implementation as is done for i386, so that the results are equivalent for i386 and x86_64.

Quoted 9 lines

---

Changes in v5:
- Reword commit message

 arch/x86/lib/bootm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
#15 lore raw

PATCH v5 11/46 x86: Show an error when a BIOS exception occurs

In reply to Simon Glass

Rather than silently hanging, show an error first. This can happen when there is something wrong with the video BIOS.

---

(no changes since v2)

Changes in v2:
- Fix BINS typo
- Drop the Ooops string

 arch/x86/lib/bios.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/lib/bios.c +1 -1
index 94349ba8073d..8cc686fd146b 100644
@@ -78,7 +78,7 @@ static int int_exception_handler(void)
 	};
 	struct eregs *regs = &reg_info;
 
-	debug("Oops, exception %d while executing option rom\n", regs->vector);
+	log_err("Exception %d while executing option rom\n", regs->vector);
 	cpu_hlt();
 
 	return 0;
Signature · 1 line
2.41.0.455.g037347b96a-goog
#16 lore raw

PATCH v5 12/46 acpi: Add a comment to set the acpi tables

In reply to Simon Glass

Sometimes a previous bootloader has written ACPI tables. It is useful to be able to find and list these. Add an 'acpi set' command to set the address for these tables.

---

Changes in v5:
- Drop unnecessary 'allow' word

 cmd/acpi.c             | 24 +++++++++++++++++++++---
 doc/usage/cmd/acpi.rst | 29 +++++++++++++++++++++++++++--
 test/dm/acpi.c         | 38 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 86 insertions(+), 5 deletions(-)
cmd/acpi.c +21 -3
index e70913e40bfe..ede9c8c7dcb4 100644
@@ -118,6 +118,22 @@ static int do_acpi_list(struct cmd_tbl *cmdtp, int flag, int argc,
 	return 0;
 }
 
+static int do_acpi_set(struct cmd_tbl *cmdtp, int flag, int argc,
+		       char *const argv[])
+{
+	ulong val;
+
+	if (argc < 2) {
+		printf("ACPI pointer: %lx\n", gd_acpi_start());
+	} else {
+		val = hextoul(argv[1], NULL);
+		printf("Setting ACPI pointer to %lx\n", val);
+		gd_set_acpi_start(val);
+	}
+
+	return 0;
+}
+
 static int do_acpi_items(struct cmd_tbl *cmdtp, int flag, int argc,
 			 char *const argv[])
 {
@@ -157,12 +173,14 @@ static int do_acpi_dump(struct cmd_tbl *cmdtp, int flag, int argc,
 
 #ifdef CONFIG_SYS_LONGHELP
 static char acpi_help_text[] =
-	"list - list ACPI tables\n"
-	"acpi items [-d]  - List/dump each piece of ACPI data from devices\n"
-	"acpi dump <name> - Dump ACPI table";
+	"list  - list ACPI tables\n"
+	"acpi items [-d]   - List/dump each piece of ACPI data from devices\n"
+	"acpi set [<addr>] - Set or show address of ACPI tables\n"
+	"acpi dump <name>  - Dump ACPI table";
 #endif
 
 U_BOOT_CMD_WITH_SUBCMDS(acpi, "ACPI tables", acpi_help_text,
 	U_BOOT_SUBCMD_MKENT(list, 1, 1, do_acpi_list),
 	U_BOOT_SUBCMD_MKENT(items, 2, 1, do_acpi_items),
+	U_BOOT_SUBCMD_MKENT(set, 2, 1, do_acpi_set),
 	U_BOOT_SUBCMD_MKENT(dump, 2, 1, do_acpi_dump));
doc/usage/cmd/acpi.rst +27 -2
index 14bafc8e3524..6b9b8949f324 100644
@@ -11,12 +11,14 @@ Synopis
     acpi list
     acpi items [-d]
     acpi dump <name>
+    acpi set <address>
 
 Description
 -----------
 
-The *acpi* command is used to dump the ACPI tables generated by U-Boot for passing
-to the operating systems.
+The *acpi* command is used to dump the ACPI tables generated by U-Boot for
+passing to the operating systems. It allows manually setting the address to take
+a look at existing ACPI tables.
 
 ACPI tables can be generated by various output functions and even devices can
 output material to include in the Differentiated System Description Table (DSDT)
@@ -231,5 +233,28 @@ Example
     00000000: 44 53 44 54 ea 32 00 00 02 eb 55 2d 42 4f 4f 54  DSDT.2....U-BOOT
     00000010: 55 2d 42 4f 4f 54 42 4c 25 07 11 20 49 4e 54 4c  U-BOOTBL%.. INTL
 
+This shows searching for tables in a known area of memory, then setting the
+pointer::
+
+    => acpi list
+    No ACPI tables present
+    => ms.s bff00000 80000 "RSD PTR"
+    bff75000: 52 53 44 20 50 54 52 20 cf 42 4f 43 48 53 20 00  RSD PTR .BOCHS .
+    1 match
+    => acpi set bff75000
+    Setting ACPI pointer to bff75000
+    => acpi list
+    Name      Base   Size  Detail
+    ----  --------  -----  ------
+    RSDP  bff75000      0  v00 BOCHS
+    RSDT  bff76a63     38  v01 BOCHS  BXPC     1 BXPC 1
+    FACP  bff768ff     74  v01 BOCHS  BXPC     1 BXPC 1
+    DSDT  bff75080   187f  v01 BOCHS  BXPC     1 BXPC 1
+    FACS  bff75040     40
+    APIC  bff76973     90  v01 BOCHS  BXPC     1 BXPC 1
+    HPET  bff76a03     38  v01 BOCHS  BXPC     1 BXPC 1
+    WAET  bff76a3b     28  v01 BOCHS  BXPC     1 BXPC 1
+    SSDT  bff95040     c5  v02 COREv4 COREBOOT 2a CORE 20221020
+
 
 .. _`ACPI specification`: https://uefi.org/sites/default/files/resources/ACPI_6_3_final_Jan30.pdf
test/dm/acpi.c +38 -0
index 818f71572c7c..77eb524b59f8 100644
@@ -609,3 +609,41 @@ static int dm_test_acpi_cmd_items(struct unit_test_state *uts)
 	return 0;
 }
 DM_TEST(dm_test_acpi_cmd_items, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);
+
+/* Test 'acpi set' command */
+static int dm_test_acpi_cmd_set(struct unit_test_state *uts)
+{
+	struct acpi_ctx ctx;
+	ulong addr;
+	void *buf;
+
+	gd_set_acpi_start(0);
+
+	console_record_reset();
+	ut_asserteq(0, gd_acpi_start());
+	ut_assertok(run_command("acpi set", 0));
+	ut_assert_nextline("ACPI pointer: 0");
+
+	buf = memalign(16, BUF_SIZE);
+	ut_assertnonnull(buf);
+	addr = map_to_sysmem(buf);
+	ut_assertok(setup_ctx_and_base_tables(uts, &ctx, addr));
+
+	ut_assertok(acpi_write_dev_tables(&ctx));
+
+	ut_assertok(run_command("acpi set", 0));
+	ut_assert_nextline("ACPI pointer: %lx", addr);
+
+	ut_assertok(run_command("acpi set 0", 0));
+	ut_assert_nextline("Setting ACPI pointer to 0");
+	ut_asserteq(0, gd_acpi_start());
+
+	ut_assertok(run_commandf("acpi set %lx", addr));
+	ut_assert_nextline("Setting ACPI pointer to %lx", addr);
+	ut_asserteq(addr, gd_acpi_start());
+
+	ut_assert_console_end();
+
+	return 0;
+}
+DM_TEST(dm_test_acpi_cmd_set, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);
Signature · 1 line
2.41.0.455.g037347b96a-goog
#17 lore raw

PATCH v5 13/46 bdinfo: Show the RAM top and approximate stack pointer

In reply to Simon Glass

These are useful pieces of information when debugging. The RAM top shows where U-Boot started allocating memory from, before it relocated. The stack pointer can be checked to ensure it is in the correct region.

---

Changes in v5:
- Add tests for bdinfo additions

 cmd/Kconfig       | 8 ++++++++
 cmd/bdinfo.c      | 5 +++++
 test/cmd/bdinfo.c | 7 +++++++
 3 files changed, 20 insertions(+)
cmd/Kconfig +8 -0
index fd76972eaa37..ecfd57523772 100644
@@ -135,6 +135,14 @@ config CMD_BDI
 	help
 	  Print board info
 
+config CMD_BDINFO_EXTRA
+	bool "bdinfo extra features"
+	default y if SANDBOX || X86
+	help
+	  Show additional information about the board. This uses a little more
+	  code space but provides more options, particularly those useful for
+	  bringup, development and debugging.
+
 config CMD_CONFIG
 	bool "config"
 	default SANDBOX
cmd/bdinfo.c +5 -0
index dab73f1d93c4..44e6d6a972e4 100644
@@ -173,6 +173,11 @@ int do_bdinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 	}
 	print_serial(gd->cur_serial_dev);
 
+	if (IS_ENABLED(CONFIG_CMD_BDINFO_EXTRA)) {
+		bdinfo_print_num_ll("stack ptr", (ulong)&bd);
+		bdinfo_print_num_ll("ram_top ptr", (ulong)gd->ram_top);
+	}
+
 	arch_print_bdinfo();
 
 	return 0;
test/cmd/bdinfo.c +7 -0
index 6480393fd5d8..8c09281cac0d 100644
@@ -205,6 +205,13 @@ static int bdinfo_test_move(struct unit_test_state *uts)
 		ut_assertok(test_num_l(uts, " clock", info.clock));
 	}
 
+	if (IS_ENABLED(CONFIG_CMD_BDINFO_EXTRA)) {
+		ut_assert_nextlinen("stack ptr");
+		ut_assertok(test_num_ll(uts, "ram_top ptr",
+					(unsigned long long)gd->ram_top));
+		ut_assertok(test_num_l(uts, "malloc base", gd_malloc_start()));
+	}
+
 	ut_assertok(ut_check_console_end(uts));
 
 	return 0;
Signature · 1 line
2.41.0.455.g037347b96a-goog
#18 lore raw

PATCH v5 14/46 part: Allow setting the partition-table type

In reply to Simon Glass

Some devices have multiple partition types available on the same media. It is sometimes useful to see these to check that everything is working correctly.

Provide a way to manually set the partition-table type, avoiding the auto-detection process.

---

(no changes since v1)

 cmd/part.c             | 34 +++++++++++++++++++
 disk/part.c            | 16 +++++++++
 doc/usage/cmd/part.rst | 74 ++++++++++++++++++++++++++++++++++++++++++
 include/part.h         |  9 +++++
 4 files changed, 133 insertions(+)
cmd/part.c +34 -0
index 28f2b7ff9bbe..0ce190005d32 100644
@@ -182,6 +182,36 @@ static int do_part_number(int argc, char *const argv[])
 	return do_part_info(argc, argv, CMD_PART_INFO_NUMBER);
 }
 
+static int do_part_set(int argc, char *const argv[])
+{
+	const char *devname, *partstr, *typestr;
+	struct blk_desc *desc;
+	int dev;
+
+	if (argc < 3)
+		return CMD_RET_USAGE;
+
+	/* Look up the device */
+	devname = argv[0];
+	partstr = argv[1];
+	typestr = argv[2];
+	dev = blk_get_device_by_str(devname, partstr, &desc);
+	if (dev < 0) {
+		printf("** Bad device specification %s %s **\n", devname,
+		       partstr);
+		return CMD_RET_FAILURE;
+	}
+
+	desc->part_type = part_get_type_by_name(typestr);
+	if (!desc->part_type) {
+		printf("Unknown partition type '%s'\n", typestr);
+		return CMD_RET_FAILURE;
+	}
+	part_print(desc);
+
+	return 0;
+}
+
 #ifdef CONFIG_PARTITION_TYPE_GUID
 static int do_part_type(int argc, char *const argv[])
 {
@@ -245,6 +275,8 @@ static int do_part(struct cmd_tbl *cmdtp, int flag, int argc,
 		return do_part_number(argc - 2, argv + 2);
 	else if (!strcmp(argv[1], "types"))
 		return do_part_types(argc - 2, argv + 2);
+	else if (!strcmp(argv[1], "set"))
+		return do_part_set(argc - 2, argv + 2);
 #ifdef CONFIG_PARTITION_TYPE_GUID
 	else if (!strcmp(argv[1], "type"))
 		return do_part_type(argc - 2, argv + 2);
@@ -279,6 +311,8 @@ U_BOOT_CMD(
 #endif
 	"part type <interface> <dev>:<part> <varname>\n"
 	"    - set environment variable to partition type\n"
+	"part set <interface> <dev> type\n"
+	"    - set partition type for a device\n"
 	"part types\n"
 	"    - list supported partition table types"
 );
disk/part.c +16 -0
index 35300df59039..1d2117ab71ee 100644
@@ -54,6 +54,22 @@ static struct part_driver *part_driver_lookup_type(struct blk_desc *dev_desc)
 	return NULL;
 }
 
+int part_get_type_by_name(const char *name)
+{
+	struct part_driver *drv =
+		ll_entry_start(struct part_driver, part_driver);
+	const int n_ents = ll_entry_count(struct part_driver, part_driver);
+	struct part_driver *entry;
+
+	for (entry = drv; entry != drv + n_ents; entry++) {
+		if (!strcasecmp(name, entry->name))
+			return entry->part_type;
+	}
+
+	/* Not found */
+	return PART_TYPE_UNKNOWN;
+}
+
 static struct blk_desc *get_dev_hwpart(const char *ifname, int dev, int hwpart)
 {
 	struct blk_desc *dev_desc;
doc/usage/cmd/part.rst +74 -0

92 lines not on this page · raw message

include/part.h +9 -0
index be75c7354955..3b1b5398699c 100644
@@ -598,6 +598,15 @@ static inline struct part_driver *part_driver_get_first(void)
 	return ll_entry_start(struct part_driver, part_driver);
 }
 
+/**
+ * part_get_type_by_name() - Get partition type by name
+ *
+ * @name: Name of partition type to look up (not case-sensitive)
+ * Returns: Corresponding partition type (PART_TYPE_...) or PART_TYPE_UNKNOWN if
+ * not known
+ */
+int part_get_type_by_name(const char *name);
+
 #else
 static inline int part_driver_get_count(void)
 { return 0; }
Signature · 1 line
2.41.0.455.g037347b96a-goog
#19 lore raw

PATCH v5 15/46 qfw: Show the file address if available

In reply to Simon Glass

Some files have an associated address. Show this with the 'qfw list' command so that it is possible to dump the data.

Note that the reference to 'md' is for the md.rst file, not a markdown file.

---

Changes in v5:
- Drop extra 'qfw list' line
- Update commit message to explain 'md' reference

 cmd/qfw.c             |  2 +-
 doc/usage/cmd/qfw.rst | 27 +++++++++++++++------------
 2 files changed, 16 insertions(+), 13 deletions(-)
cmd/qfw.c +1 -1
index ae3c6a7a84e9..d6ecfa60d5a7 100644
@@ -26,7 +26,7 @@ static int qemu_fwcfg_cmd_list_firmware(void)
 	for (file = qfw_file_iter_init(qfw_dev, &iter);
 	     !qfw_file_iter_end(&iter);
 	     file = qfw_file_iter_next(&iter)) {
-		printf("%-56s\n", file->cfg.name);
+		printf("%08lx %-56s\n", file->addr, file->cfg.name);
 	}
 
 	return 0;
doc/usage/cmd/qfw.rst +15 -12
index cc0e27c27790..ec13e0967ae5 100644
@@ -41,18 +41,21 @@ QEMU firmware files are listed via the *qfw list* command:
 ::
 
     => qfw list
-    etc/boot-fail-wait
-    etc/smbios/smbios-tables
-    etc/smbios/smbios-anchor
-    etc/e820
-    genroms/kvmvapic.bin
-    genroms/linuxboot.bin
-    etc/system-states
-    etc/acpi/tables
-    etc/table-loader
-    etc/tpm/log
-    etc/acpi/rsdp
-    bootorder
+    00000000 bios-geometry
+    00000000 bootorder
+    000f0060 etc/acpi/rsdp
+    bed14040 etc/acpi/tables
+    00000000 etc/boot-fail-wait
+    00000000 etc/e820
+    00000000 etc/smbios/smbios-anchor
+    00000000 etc/smbios/smbios-tables
+    00000000 etc/system-states
+    00000000 etc/table-loader
+    00000000 etc/tpm/log
+    00000000 genroms/kvmvapic.bin
+
+Where an address is shown, it indicates where the data is available for
+inspection, e.g. using the :doc:`md`.
 
 The available CPUs can be shown via the *qfw cpus* command:
 
Signature · 1 line
2.41.0.455.g037347b96a-goog
Reviewed-by on v5 15/46
#20 lore raw

Re: [PATCH v5 15/46] qfw: Show the file address if available

Quoted 10 lines · Simon Glass

Some files have an associated address. Show this with the 'qfw list' command so that it is possible to dump the data.

Note that the reference to 'md' is for the md.rst file, not a markdown file.

---

Quoted 8 lines

Changes in v5:
- Drop extra 'qfw list' line
- Update commit message to explain 'md' reference

 cmd/qfw.c             |  2 +-
 doc/usage/cmd/qfw.rst | 27 +++++++++++++++------------
 2 files changed, 16 insertions(+), 13 deletions(-)
#21 lore raw

PATCH v5 16/46 log: Tidy up an ambiguous comment

In reply to Simon Glass

Add a bit more detail so it is clear that multiple devices are supported, but only one per driver.

---

Changes in v5:
- Drop period at end of commit subject
- Drop extra 'a' in commit message

 common/log.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
common/log.c +1 -1
index 6f02a25c5931..b2de57fcb3b8 100644
@@ -437,7 +437,7 @@ int log_init(void)
 	/*
 	 * We cannot add runtime data to the driver since it is likely stored
 	 * in rodata. Instead, set up a 'device' corresponding to each driver.
-	 * We only support having a single device.
+	 * We only support having a single device for each driver.
 	 */
 	INIT_LIST_HEAD((struct list_head *)&gd->log_head);
 	while (drv < end) {
Signature · 1 line
2.41.0.455.g037347b96a-goog
Reviewed-by on v5 16/46
#22 lore raw

Re: [PATCH v5 16/46] log: Tidy up an ambiguous comment

Quoted 5 lines · Simon Glass

Add a bit more detail so it is clear that multiple devices are supported, but only one per driver.

Quoted 9 lines

---

Changes in v5:
- Drop period at end of commit subject
- Drop extra 'a' in commit message

 common/log.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
#23 lore raw

PATCH v5 17/46 qfw: Set the address of the ACPI tables

In reply to Simon Glass

Once the ACPI tables have been set up, record their address so that it is possible to list them with 'acpi list'.

---

(no changes since v1)

 drivers/misc/qfw.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/misc/qfw.c +4 -0
index 9ef95caa8956..0a93feeb4b2e 100644
@@ -18,6 +18,7 @@
 #include <dm.h>
 #include <misc.h>
 #include <tables_csum.h>
+#include <asm/acpi_table.h>
 
 #if defined(CONFIG_GENERATE_ACPI_TABLE) && !defined(CONFIG_SANDBOX)
 /*
@@ -227,6 +228,9 @@ out:
 	}
 
 	free(table_loader);
+
+	gd_set_acpi_start(acpi_get_rsdp_addr());
+
 	return addr;
 }
 
Signature · 1 line
2.41.0.455.g037347b96a-goog
#24 lore raw

PATCH v5 18/46 efi: Show all known UUIDs with CONFIG_CMD_EFIDEBUG

In reply to Simon Glass

The CMD_EFIDEBUG option enables debugging so it is reasonable to assume that all effects should be made to decode the dreaded UUIDs favoured by UEFI.

Update the table to show them all when CONFIG_CMD_EFIDEBUG is enabled.

---

(no changes since v1)

 lib/uuid.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
lib/uuid.c +1 -1
index 96e1af3c8b00..ab30fbf9152f 100644
@@ -255,7 +255,7 @@ static const struct {
 		EFI_CERT_TYPE_PKCS7_GUID,
 	},
 #endif
-#ifdef CONFIG_EFI
+#if defined(CONFIG_CMD_EFIDEBUG) || defined(CONFIG_EFI)
 	{ "EFI_LZMA_COMPRESSED", EFI_LZMA_COMPRESSED },
 	{ "EFI_DXE_SERVICES", EFI_DXE_SERVICES },
 	{ "EFI_HOB_LIST", EFI_HOB_LIST },
Signature · 1 line
2.41.0.455.g037347b96a-goog
#25 lore raw

PATCH v5 19/46 x86: Improve the trampoline in 64-bit mode

In reply to Simon Glass

At present this leaves the stack at the pre-relocation value. This is not ideal since we want to have U-Boot running entirely from the top of memory.

In addition, the new global_data pointer is not actually used, since the global_data pointer itself is relocated, then the pre-relocation value is changed, so the effective value (after relocation) does not update.

Adjust the implementation to follow the 32-bit code more closely, with a trampoline function which is passed the new stack and global_data pointer. This ensures that the correct values come through even when relocating.

---

(no changes since v1)

 arch/x86/cpu/start64.S            | 19 +++++++++++++++++++
 arch/x86/include/asm/u-boot-x86.h | 11 +++++++++++
 common/board_f.c                  | 12 +++++++-----
 3 files changed, 37 insertions(+), 5 deletions(-)
arch/x86/cpu/start64.S +19 -0
index 7be834788b9f..78e894d2a21a 100644
@@ -26,3 +26,22 @@ _start:
 
 	/* Should not return here */
 	jmp	.
+
+.globl board_init_f_r_trampoline64
+.type board_init_f_r_trampoline64, @function
+board_init_f_r_trampoline64:
+	/*
+	 * SDRAM has been initialised, U-Boot code has been copied into
+	 * RAM, BSS has been cleared and relocation adjustments have been
+	 * made. It is now time to jump into the in-RAM copy of U-Boot
+	 *
+	 * %eax = Address of top of new stack
+	 */
+
+	/* Stack grows down from top of SDRAM */
+	movq	%rsi, %rsp
+
+	/* New gd is in rdi */
+
+	/* Re-enter U-Boot by calling board_init_f_r() */
+	call	board_init_f_r
arch/x86/include/asm/u-boot-x86.h +11 -0
index 1d8aa320f535..02a8b0f15270 100644
@@ -117,6 +117,17 @@ void __noreturn board_init_f_r_trampoline(ulong sp);
  */
 void __noreturn board_init_f_r(void);
 
+/*
+ * board_init_f_r_trampoline64() - jump to relocated address with new stack
+ *
+ * This is the 64-bit version
+ *
+ * @new_gd: New global_data pointer to use
+ * @sp: New stack pointer to pass on to board_init_r()
+ */
+void __noreturn board_init_f_r_trampoline64(struct global_data *new_gd,
+					    ulong sp);
+
 int arch_misc_init(void);
 
 /* Read the time stamp counter */
common/board_f.c +7 -5
index 334d04af197b..e5969ec9a27b 100644
@@ -729,8 +729,7 @@ static int fix_fdt(void)
 #endif
 
 /* ARM calls relocate_code from its crt0.S */
-#if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) && \
-		!CONFIG_IS_ENABLED(X86_64)
+#if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX)
 
 static int jump_to_copy(void)
 {
@@ -752,7 +751,11 @@ static int jump_to_copy(void)
 	 * (CPU cache)
 	 */
 	arch_setup_gd(gd->new_gd);
-	board_init_f_r_trampoline(gd->start_addr_sp);
+# if CONFIG_IS_ENABLED(X86_64)
+		board_init_f_r_trampoline64(gd->new_gd, gd->start_addr_sp);
+# else
+		board_init_f_r_trampoline(gd->start_addr_sp);
+# endif
 #else
 	relocate_code(gd->start_addr_sp, gd->new_gd, gd->relocaddr);
 #endif
@@ -967,8 +970,7 @@ static const init_fnc_t init_sequence_f[] = {
 	 * watchdog device is not serviced is as small as possible.
 	 */
 	cyclic_unregister_all,
-#if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) && \
-		!CONFIG_IS_ENABLED(X86_64)
+#if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX)
 	jump_to_copy,
 #endif
 	NULL,
Signature · 1 line
2.41.0.455.g037347b96a-goog
#26 lore raw

PATCH v5 20/46 bdinfo: Show the malloc base with the bdinfo command

In reply to Simon Glass

It is useful to see the base of the malloc region. This is visible when debugging but not in normal usage.

Add it to the global data so that it can be shown.

---

Changes in v5:
- Add 'bdinfo' tag to commit subject

 cmd/bdinfo.c                      |  1 +
 common/board_r.c                  |  7 ++++---
 include/asm-generic/global_data.h | 13 +++++++++++++
 3 files changed, 18 insertions(+), 3 deletions(-)
cmd/bdinfo.c +1 -0
index 44e6d6a972e4..1fe13ca13a0a 100644
@@ -176,6 +176,7 @@ int do_bdinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 	if (IS_ENABLED(CONFIG_CMD_BDINFO_EXTRA)) {
 		bdinfo_print_num_ll("stack ptr", (ulong)&bd);
 		bdinfo_print_num_ll("ram_top ptr", (ulong)gd->ram_top);
+		bdinfo_print_num_l("malloc base", gd_malloc_start());
 	}
 
 	arch_print_bdinfo();
common/board_r.c +4 -3
index d798c00a80a5..4aaa89403117 100644
@@ -196,7 +196,7 @@ static int initr_barrier(void)
 
 static int initr_malloc(void)
 {
-	ulong malloc_start;
+	ulong start;
 
 #if CONFIG_VAL(SYS_MALLOC_F_LEN)
 	debug("Pre-reloc malloc() used %#lx bytes (%ld KB)\n", gd->malloc_ptr,
@@ -207,8 +207,9 @@ static int initr_malloc(void)
 	 * This value MUST match the value of gd->start_addr_sp in board_f.c:
 	 * reserve_noncached().
 	 */
-	malloc_start = gd->relocaddr - TOTAL_MALLOC_LEN;
-	mem_malloc_init((ulong)map_sysmem(malloc_start, TOTAL_MALLOC_LEN),
+	start = gd->relocaddr - TOTAL_MALLOC_LEN;
+	gd_set_malloc_start(start);
+	mem_malloc_init((ulong)map_sysmem(start, TOTAL_MALLOC_LEN),
 			TOTAL_MALLOC_LEN);
 	return 0;
 }
include/asm-generic/global_data.h +13 -0
index a1e1b9d64005..8fc205ded1a3 100644
@@ -301,6 +301,12 @@ struct global_data {
 	 * @timebase_l: low 32 bits of timer
 	 */
 	unsigned int timebase_l;
+	/**
+	 * @malloc_start: start of malloc() region
+	 */
+#if CONFIG_IS_ENABLED(CMD_BDINFO_EXTRA)
+	unsigned long malloc_start;
+#endif
 #if CONFIG_VAL(SYS_MALLOC_F_LEN)
 	/**
 	 * @malloc_base: base address of early malloc()
@@ -560,6 +566,13 @@ static_assert(sizeof(struct global_data) == GD_SIZE);
 #define gd_event_state()	NULL
 #endif
 
+#if CONFIG_IS_ENABLED(CMD_BDINFO_EXTRA)
+#define gd_malloc_start()		gd->malloc_start
+#define gd_set_malloc_start(_val)	gd->malloc_start = (_val)
+#else
+#define gd_malloc_start()	0
+#define gd_set_malloc_start(val)
+#endif
 /**
  * enum gd_flags - global data flags
  *
Signature · 1 line
2.41.0.455.g037347b96a-goog
#27 lore raw

PATCH v5 21/46 nvme: Provide more useful debugging messages

In reply to Simon Glass

When scanning fails it is useful to be able to decode what went wrong. Add some debugging for this.

---

(no changes since v1)

 drivers/nvme/nvme.c | 36 ++++++++++++++++++++++++++----------
 1 file changed, 26 insertions(+), 10 deletions(-)
drivers/nvme/nvme.c +26 -10
index 74e7a5b01109..a7add66ab4d1 100644
@@ -578,17 +578,22 @@ static int nvme_set_queue_count(struct nvme_dev *dev, int count)
 	return min(result & 0xffff, result >> 16) + 1;
 }
 
-static void nvme_create_io_queues(struct nvme_dev *dev)
+static int nvme_create_io_queues(struct nvme_dev *dev)
 {
 	unsigned int i;
+	int ret;
 
 	for (i = dev->queue_count; i <= dev->max_qid; i++)
 		if (!nvme_alloc_queue(dev, i, dev->q_depth))
-			break;
+			return log_msg_ret("all", -ENOMEM);
 
-	for (i = dev->online_queues; i <= dev->queue_count - 1; i++)
-		if (nvme_create_queue(dev->queues[i], i))
-			break;
+	for (i = dev->online_queues; i <= dev->queue_count - 1; i++) {
+		ret = nvme_create_queue(dev->queues[i], i);
+		if (ret)
+			return log_msg_ret("cre", ret);
+	}
+
+	return 0;
 }
 
 static int nvme_setup_io_queues(struct nvme_dev *dev)
@@ -598,14 +603,18 @@ static int nvme_setup_io_queues(struct nvme_dev *dev)
 
 	nr_io_queues = 1;
 	result = nvme_set_queue_count(dev, nr_io_queues);
-	if (result <= 0)
+	if (result <= 0) {
+		log_debug("Cannot set queue count (err=%dE)\n", result);
 		return result;
+	}
 
 	dev->max_qid = nr_io_queues;
 
 	/* Free previously allocated queues */
 	nvme_free_queues(dev, nr_io_queues + 1);
-	nvme_create_io_queues(dev);
+	result = nvme_create_io_queues(dev);
+	if (result)
+		return result;
 
 	return 0;
 }
@@ -683,8 +692,11 @@ int nvme_scan_namespace(void)
 
 	uclass_foreach_dev(dev, uc) {
 		ret = device_probe(dev);
-		if (ret)
+		if (ret) {
+			log_err("Failed to probe '%s': err=%dE\n", dev->name,
+				ret);
 			return ret;
+		}
 	}
 
 	return 0;
@@ -842,8 +854,10 @@ int nvme_init(struct udevice *udev)
 	ndev->dbs = ((void __iomem *)ndev->bar) + 4096;
 
 	ret = nvme_configure_admin_queue(ndev);
-	if (ret)
+	if (ret) {
+		log_debug("Unable to configure admin queue (err=%dE)\n", ret);
 		goto free_queue;
+	}
 
 	/* Allocate after the page size is known */
 	ndev->prp_pool = memalign(ndev->page_size, MAX_PRP_POOL);
@@ -855,8 +869,10 @@ int nvme_init(struct udevice *udev)
 	ndev->prp_entry_num = MAX_PRP_POOL >> 3;
 
 	ret = nvme_setup_io_queues(ndev);
-	if (ret)
+	if (ret) {
+		log_debug("Unable to setup I/O queues(err=%dE)\n", ret);
 		goto free_queue;
+	}
 
 	nvme_get_info_from_identify(ndev);
 
Signature · 1 line
2.41.0.455.g037347b96a-goog
#28 lore raw

PATCH v5 22/46 pci: Support autoconfig in SPL

In reply to Simon Glass

Allow PCI autoconfig to be handled in SPL, so that we can set it up correctly for boards which need to do this before U-Boot proper. This includes qemu-x64_64 which needs to set up the video device while in 32-bit mode.

---

(no changes since v1)

 drivers/pci/Kconfig      |  5 +++++
 drivers/pci/pci-uclass.c | 10 +++++++++-
 2 files changed, 14 insertions(+), 1 deletion(-)
drivers/pci/Kconfig +5 -0
index 84a2ae951f77..aca439d92139 100644
@@ -44,8 +44,13 @@ config SPL_PCI_PNP
 	bool "Enable Plug & Play support for PCI"
 	help
 	  Enable PCI memory and I/O space resource allocation and assignment.
+
 	  This is required to auto configure the enumerated devices.
 
+	  This is normally not done in SPL, but can be enabled if devices must
+	  be set up in the SPL phase. Often it is enough to manually configure
+	  one device, so this option can be disabled.
+
 config PCI_REGION_MULTI_ENTRY
 	bool "Enable Multiple entries of region type MEMORY in ranges for PCI"
 	help
drivers/pci/pci-uclass.c +9 -1
index 8d27e40338cf..632c1a63cfce 100644
@@ -13,6 +13,7 @@
 #include <log.h>
 #include <malloc.h>
 #include <pci.h>
+#include <spl.h>
 #include <asm/global_data.h>
 #include <asm/io.h>
 #include <dm/device-internal.h>
@@ -722,6 +723,9 @@ static bool pci_need_device_pre_reloc(struct udevice *bus, uint vendor,
 	u32 vendev;
 	int index;
 
+	if (spl_phase() == PHASE_SPL && CONFIG_IS_ENABLED(PCI_PNP))
+		return true;
+
 	for (index = 0;
 	     !dev_read_u32_index(bus, "u-boot,pci-pre-reloc", index,
 				 &vendev);
@@ -793,7 +797,9 @@ static int pci_find_and_bind_driver(struct udevice *parent,
 			 * space is pretty limited (ie: using Cache As RAM).
 			 */
 			if (!(gd->flags & GD_FLG_RELOC) &&
-			    !(drv->flags & DM_FLAG_PRE_RELOC))
+			    !(drv->flags & DM_FLAG_PRE_RELOC) &&
+			    (!CONFIG_IS_ENABLED(PCI_PNP) ||
+			     spl_phase() != PHASE_SPL))
 				return log_msg_ret("pre", -EPERM);
 
 			/*
@@ -918,6 +924,8 @@ int pci_bind_bus_devices(struct udevice *bus)
 			}
 			ret = pci_find_and_bind_driver(bus, &find_id, bdf,
 						       &dev);
+		} else {
+			debug("device: %s\n", dev->name);
 		}
 		if (ret == -EPERM)
 			continue;
Signature · 1 line
2.41.0.455.g037347b96a-goog
#29 lore raw

PATCH v5 23/46 pci: Allow the video BIOS to work in SPL with QEMU

In reply to Simon Glass

QEMU emulates two common machines (Q35 and i440fx) which use mapping to determine whether RAM is present below 1MB. In order to copy the video BIOS to c0000 we need to flip this mapping over to RAM. This does not happen automatically until SPL has finished running.

Switch in RAM at these address so that the video BIOS can be loaded and run.

Create a generic qemu.h header to avoid having to #ifdef the header in pci_rom.c

---

Changes in v5:
- Use the existing QEMU code instead

 arch/x86/cpu/qemu/qemu.c |  5 +++--
 drivers/pci/pci_rom.c    |  5 +++++
 include/qemu.h           | 14 ++++++++++++++
 3 files changed, 22 insertions(+), 2 deletions(-)
 create mode 100644 include/qemu.h
arch/x86/cpu/qemu/qemu.c +3 -2
index 274978c023b6..a84d2aceda3c 100644
@@ -7,6 +7,7 @@
 #include <cpu_func.h>
 #include <init.h>
 #include <pci.h>
+#include <qemu.h>
 #include <qfw.h>
 #include <dm/platdata.h>
 #include <asm/irq.h>
@@ -48,7 +49,7 @@ static void enable_pm_ich9(void)
 	pci_write_config32(ICH9_PM, PMBA, CONFIG_ACPI_PM1_BASE | 1);
 }
 
-static void qemu_chipset_init(void)
+void qemu_x86_chipset_init(void)
 {
 	u16 device, xbcs;
 	int pam, i;
@@ -119,7 +120,7 @@ int print_cpuinfo(void)
 
 int arch_early_init_r(void)
 {
-	qemu_chipset_init();
+	qemu_x86_chipset_init();
 
 	return 0;
 }
drivers/pci/pci_rom.c +5 -0
index f0dfe6314907..447957fb23aa 100644
@@ -34,6 +34,7 @@
 #include <malloc.h>
 #include <pci.h>
 #include <pci_rom.h>
+#include <qemu.h>
 #include <vesa.h>
 #include <video.h>
 #include <acpi/acpi_s3.h>
@@ -185,6 +186,10 @@ static int pci_rom_load(struct pci_rom_header *rom_header,
 		return -ENOMEM;
 	*allocedp = true;
 #endif
+	/* QEMU hacks */
+	if (IS_ENABLED(CONFIG_X86) && IS_ENABLED(CONFIG_QEMU))
+		qemu_x86_chipset_init();
+
 	if (target != rom_header) {
 		ulong start = get_timer(0);
 
include/qemu.h new file +14 -0
new file mode 100644
index 000000000000..d285b01ed80a
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Generic QEMU header
+ *
+ * Copyright 2023 Google LLC
+ */
+
+#ifndef __QEMU_H
+#define __QEMU_H
+
+/* set up the chipset for QEMU so that video can be used */
+void qemu_x86_chipset_init(void);
+
+#endif
Signature · 1 line
2.41.0.455.g037347b96a-goog
#30 lore raw

Re: [PATCH v5 23/46] pci: Allow the video BIOS to work in SPL with QEMU

Hi Simon,

Quoted 67 lines · Simon Glass

QEMU emulates two common machines (Q35 and i440fx) which use mapping to determine whether RAM is present below 1MB. In order to copy the video BIOS to c0000 we need to flip this mapping over to RAM. This does not happen automatically until SPL has finished running.

Switch in RAM at these address so that the video BIOS can be loaded and run.

Create a generic qemu.h header to avoid having to #ifdef the header in pci_rom.c

---

Changes in v5:
- Use the existing QEMU code instead

 arch/x86/cpu/qemu/qemu.c |  5 +++--
 drivers/pci/pci_rom.c    |  5 +++++
 include/qemu.h           | 14 ++++++++++++++
 3 files changed, 22 insertions(+), 2 deletions(-)
 create mode 100644 include/qemu.h
arch/x86/cpu/qemu/qemu.c +3 -2
index 274978c023b6..a84d2aceda3c 100644
@@ -7,6 +7,7 @@
 #include <cpu_func.h>
 #include <init.h>
 #include <pci.h>
+#include <qemu.h>
 #include <qfw.h>
 #include <dm/platdata.h>
 #include <asm/irq.h>
@@ -48,7 +49,7 @@ static void enable_pm_ich9(void)
        pci_write_config32(ICH9_PM, PMBA, CONFIG_ACPI_PM1_BASE | 1);
 }
 
-static void qemu_chipset_init(void)
+void qemu_x86_chipset_init(void)
 {
        u16 device, xbcs;
        int pam, i;
@@ -119,7 +120,7 @@ int print_cpuinfo(void)
 
 int arch_early_init_r(void)
 {
-       qemu_chipset_init();
+       qemu_x86_chipset_init();
 
        return 0;
 }
drivers/pci/pci_rom.c +1 -0
index f0dfe6314907..447957fb23aa 100644
@@ -34,6 +34,7 @@
 #include <malloc.h>
 #include <pci.h>
 #include <pci_rom.h>
+#include <qemu.h>
 #include <vesa.h>
 #include <video.h>
 #include <acpi/acpi_s3.h>

drivers/pci/pci_rom.c static int pci_rom_load(struct pci_rom_header *rom_header, · line 192

Quoted 7 lines
drivers/pci/pci_rom.c +4 -0
@@ -185,6 +186,10 @@ static int pci_rom_load(struct pci_rom_header *rom_header,
                return -ENOMEM;
        *allocedp = true;
 #endif
+       /* QEMU hacks */
+       if (IS_ENABLED(CONFIG_X86) && IS_ENABLED(CONFIG_QEMU))
+               qemu_x86_chipset_init();
+

Maybe I did not say it clearly in the previous version. I think we should avoid polluting the generic pci_rom.c codes.

First of all, these are not QEMU hacks, but are required operations against a specific Intel chipset. QEMU just emulates the real hardware behavior.

Second, we should update x86 SPL codes to call qemu_chipset_init() for QEMU x86_64.

Quoted 14 lines
drivers/pci/pci_rom.c +0 -0
        if (target != rom_header) {
                ulong start = get_timer(0);
 
include/qemu.h new file +5 -0
new file mode 100644
index 000000000000..d285b01ed80a
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Generic QEMU header
+ *
+ * Copyright 2023 Google LLC

include/qemu.h

Quoted 10 lines
include/qemu.h new file +9 -1
+ */
+
+#ifndef __QEMU_H
+#define __QEMU_H
+
+/* set up the chipset for QEMU so that video can be used */
+void qemu_x86_chipset_init(void);
+
+#endif
--

Regards,
Bin

#31 lore raw

Re: [PATCH v5 23/46] pci: Allow the video BIOS to work in SPL with QEMU

Hi Bin,

Quoted 82 lines · Bin Meng

Hi Simon,

Quoted 67 lines · Simon Glass

QEMU emulates two common machines (Q35 and i440fx) which use mapping to determine whether RAM is present below 1MB. In order to copy the video BIOS to c0000 we need to flip this mapping over to RAM. This does not happen automatically until SPL has finished running.

Switch in RAM at these address so that the video BIOS can be loaded and run.

Create a generic qemu.h header to avoid having to #ifdef the header in pci_rom.c

---

Changes in v5:
- Use the existing QEMU code instead

 arch/x86/cpu/qemu/qemu.c |  5 +++--
 drivers/pci/pci_rom.c    |  5 +++++
 include/qemu.h           | 14 ++++++++++++++
 3 files changed, 22 insertions(+), 2 deletions(-)
 create mode 100644 include/qemu.h
arch/x86/cpu/qemu/qemu.c +3 -2
index 274978c023b6..a84d2aceda3c 100644
@@ -7,6 +7,7 @@
 #include <cpu_func.h>
 #include <init.h>
 #include <pci.h>
+#include <qemu.h>
 #include <qfw.h>
 #include <dm/platdata.h>
 #include <asm/irq.h>
@@ -48,7 +49,7 @@ static void enable_pm_ich9(void)
        pci_write_config32(ICH9_PM, PMBA, CONFIG_ACPI_PM1_BASE | 1);
 }
 
-static void qemu_chipset_init(void)
+void qemu_x86_chipset_init(void)
 {
        u16 device, xbcs;
        int pam, i;
@@ -119,7 +120,7 @@ int print_cpuinfo(void)
 
 int arch_early_init_r(void)
 {
-       qemu_chipset_init();
+       qemu_x86_chipset_init();
 
        return 0;
 }
drivers/pci/pci_rom.c +1 -0
index f0dfe6314907..447957fb23aa 100644
@@ -34,6 +34,7 @@
 #include <malloc.h>
 #include <pci.h>
 #include <pci_rom.h>
+#include <qemu.h>
 #include <vesa.h>
 #include <video.h>
 #include <acpi/acpi_s3.h>

drivers/pci/pci_rom.c static int pci_rom_load(struct pci_rom_header *rom_header, · line 192

Quoted 7 lines
drivers/pci/pci_rom.c +4 -0
@@ -185,6 +186,10 @@ static int pci_rom_load(struct pci_rom_header *rom_header,
                return -ENOMEM;
        *allocedp = true;
 #endif
+       /* QEMU hacks */
+       if (IS_ENABLED(CONFIG_X86) && IS_ENABLED(CONFIG_QEMU))
+               qemu_x86_chipset_init();
+

Maybe I did not say it clearly in the previous version. I think we should avoid polluting the generic pci_rom.c codes.

Quoted 6 lines

First of all, these are not QEMU hacks, but are required operations against a specific Intel chipset. QEMU just emulates the real hardware behavior.

Second, we should update x86 SPL codes to call qemu_chipset_init() for QEMU x86_64.

OK I understand now. I sent a new series that includes a new patch\.

Regards,
Simon

#32 lore raw

PATCH v5 24/46 pci: Tidy up logging and reporting for video BIOS

In reply to Simon Glass

When running the ROM the code is not very helpful when something goes wrong. Add a little more debugging and some logging of return values to improve this.

---

(no changes since v1)

 drivers/pci/pci_rom.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/pci/pci_rom.c +9 -3
index 447957fb23aa..4567d9b4b932 100644
@@ -259,14 +259,16 @@ int dm_pci_run_vga_bios(struct udevice *dev, int (*int15_handler)(void),
 
 	ret = pci_rom_probe(dev, &rom);
 	if (ret)
-		return ret;
+		return log_msg_ret("pro", ret);
 
 	ret = pci_rom_load(rom, &ram, &alloced);
-	if (ret)
+	if (ret) {
+		ret = log_msg_ret("ld", ret);
 		goto err;
+	}
 
 	if (!board_should_run_oprom(dev)) {
-		ret = -ENXIO;
+		ret = log_msg_ret("run", -ENXIO);
 		goto err;
 	}
 
@@ -304,21 +306,25 @@ int dm_pci_run_vga_bios(struct udevice *dev, int (*int15_handler)(void),
 #ifdef CONFIG_BIOSEMU
 		BE_VGAInfo *info;
 
+		log_debug("Running video BIOS with emulator...");
 		ret = biosemu_setup(dev, &info);
 		if (ret)
 			goto err;
 		biosemu_set_interrupt_handler(0x15, int15_handler);
 		ret = biosemu_run(dev, (uchar *)ram, 1 << 16, info,
 				  true, vesa_mode, &mode_info);
+		log_debug("done\n");
 		if (ret)
 			goto err;
 #endif
 	} else {
 #if defined(CONFIG_X86) && (CONFIG_IS_ENABLED(X86_32BIT_INIT) || CONFIG_TPL)
+		log_debug("Running video BIOS...");
 		bios_set_interrupt_handler(0x15, int15_handler);
 
 		bios_run_on_x86(dev, (unsigned long)ram, vesa_mode,
 				&mode_info);
+		log_debug("done\n");
 #endif
 	}
 	debug("Final vesa mode %#x\n", mode_info.video_mode);
Signature · 1 line
2.41.0.455.g037347b96a-goog
#33 lore raw

PATCH v5 25/46 x86: Allow video-BIOS code to be built for SPL

In reply to Simon Glass

With qemu-x86_64 we need to run the video BIOS while in 32-bit mode, i.e. SPL. Add a Kconfig option for this, adjust the Makefile rules and use CONFIG_IS_ENABLED() where needed.

---

(no changes since v1)

 arch/x86/lib/Makefile |  7 ++++---
 arch/x86/lib/bios.c   |  2 +-
 drivers/pci/pci_rom.c | 28 ++++++++++++++--------------
 3 files changed, 19 insertions(+), 18 deletions(-)
arch/x86/lib/Makefile +4 -3
index b0612ae6dd5f..90a7618ecfde 100644
@@ -4,16 +4,17 @@
 # Wolfgang Denk, DENX Software Engineering, [email protected].
 
 obj-y	+= bdinfo.o
-ifndef CONFIG_X86_64
-ifndef CONFIG_TPL_BUILD
+
+ifndef CONFIG_$(SPL_TPL_)X86_64
 obj-y += bios.o
 obj-y += bios_asm.o
 obj-y += bios_interrupts.o
 endif
-endif
+
 ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_X86_32BIT_INIT) += string.o
 endif
+
 ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_CMD_BOOTM) += bootm.o
 endif
arch/x86/lib/bios.c +1 -1
index 8cc686fd146b..e29cae78e509 100644
@@ -23,7 +23,7 @@
 static int (*int_handler[256])(void);
 
 /* to have a common register file for interrupt handlers */
-#ifndef CONFIG_BIOSEMU
+#if !CONFIG_IS_ENABLED(BIOSEMU)
 X86EMU_sysEnv _X86EMU_env;
 #endif
 
drivers/pci/pci_rom.c +14 -14
index 4567d9b4b932..4a7e47b65283 100644
@@ -303,20 +303,20 @@ int dm_pci_run_vga_bios(struct udevice *dev, int (*int15_handler)(void),
 	}
 
 	if (emulate) {
-#ifdef CONFIG_BIOSEMU
-		BE_VGAInfo *info;
-
-		log_debug("Running video BIOS with emulator...");
-		ret = biosemu_setup(dev, &info);
-		if (ret)
-			goto err;
-		biosemu_set_interrupt_handler(0x15, int15_handler);
-		ret = biosemu_run(dev, (uchar *)ram, 1 << 16, info,
-				  true, vesa_mode, &mode_info);
-		log_debug("done\n");
-		if (ret)
-			goto err;
-#endif
+		if (CONFIG_IS_ENABLED(BIOSEMU)) {
+			BE_VGAInfo *info;
+
+			log_debug("Running video BIOS with emulator...");
+			ret = biosemu_setup(dev, &info);
+			if (ret)
+				goto err;
+			biosemu_set_interrupt_handler(0x15, int15_handler);
+			ret = biosemu_run(dev, (uchar *)ram, 1 << 16, info,
+					  true, vesa_mode, &mode_info);
+			log_debug("done\n");
+			if (ret)
+				goto err;
+		}
 	} else {
 #if defined(CONFIG_X86) && (CONFIG_IS_ENABLED(X86_32BIT_INIT) || CONFIG_TPL)
 		log_debug("Running video BIOS...");
Signature · 1 line
2.41.0.455.g037347b96a-goog
#34 lore raw

PATCH v5 26/46 x86: Pass video settings from SPL to U-Boot proper

In reply to Simon Glass

When video is set up in SPL, U-Boot proper needs to use the correct parameters so it can write to the display.

Put these in a bloblist so they are available to U-Boot proper.

---

Changes in v5:
- Use u16 instead of ushort

Changes in v3:
- Add a tag name for the blob

 common/bloblist.c     |  1 +
 drivers/pci/pci_rom.c | 78 +++++++++++++++++++++++++++++++------------
 include/bloblist.h    |  1 +
 include/video.h       | 24 +++++++++++++
 4 files changed, 83 insertions(+), 21 deletions(-)
common/bloblist.c +1 -0
index 0d63b6e88177..2144b10e1d04 100644
@@ -51,6 +51,7 @@ static struct tag_name {
 
 	/* BLOBLISTT_PROJECT_AREA */
 	{ BLOBLISTT_U_BOOT_SPL_HANDOFF, "SPL hand-off" },
+	{ BLOBLISTT_U_BOOT_VIDEO, "SPL video handoff" },
 
 	/* BLOBLISTT_VENDOR_AREA */
 };
drivers/pci/pci_rom.c +57 -21

103 lines not on this page · raw message

include/bloblist.h +1 -0
index 2a2f1700eb09..7ea72c6bd46d 100644
@@ -113,6 +113,7 @@ enum bloblist_tag_t {
 	BLOBLISTT_PROJECT_AREA = 0x8000,
 	BLOBLISTT_U_BOOT_SPL_HANDOFF = 0x8000, /* Hand-off info from SPL */
 	BLOBLISTT_VBE		= 0x8001,	/* VBE per-phase state */
+	BLOBLISTT_U_BOOT_VIDEO = 0x8002, /* Video information from SPL */
 
 	/*
 	 * Vendor-specific tags are permitted here. Projects can be open source
include/video.h +24 -0
index e98d0f9c895d..9729fa348aa5 100644
@@ -134,6 +134,30 @@ struct video_ops {
 
 #define video_get_ops(dev)        ((struct video_ops *)(dev)->driver->ops)
 
+/**
+ * struct video_handoff - video information passed from SPL
+ *
+ * This is used when video is set up by SPL, to provide the details to U-Boot
+ * proper.
+ *
+ * @fb: Base address of frame buffer, 0 if not yet known
+ * @size: Frame-buffer size, in bytes
+ * @xsize:	Number of pixel columns (e.g. 1366)
+ * @ysize:	Number of pixels rows (e.g.. 768)
+ * @line_length:	Length of each frame buffer line, in bytes. This can be
+ *		set by the driver, but if not, the uclass will set it after
+ *		probing
+ * @bpix:	Encoded bits per pixel (enum video_log2_bpp)
+ */
+struct video_handoff {
+	u64 fb;
+	u32 size;
+	u16 xsize;
+	u16 ysize;
+	u32 line_length;
+	u8 bpix;
+};
+
 /** enum colour_idx - the 16 colors supported by consoles */
 enum colour_idx {
 	VID_BLACK = 0,
Signature · 1 line
2.41.0.455.g037347b96a-goog
#35 lore raw

PATCH v5 27/46 x86: Ensure SPL banner is only shown once

In reply to Simon Glass

Print the banner in SPL init only if the spl_board_init() function isn't enabled. The spl_board_init() function is in the same file, but is called later, by board_init_r().

This avoids printing two banners, which causes tests to fail.

---

Changes in v5:
- Split out banner code into a separate patch

 arch/x86/lib/spl.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
arch/x86/lib/spl.c +7 -1
index b9d23e6bfe18..f27501875ecc 100644
@@ -97,7 +97,13 @@ static int x86_spl_init(void)
 		return ret;
 	}
 #endif
-	preloader_console_init();
+	/*
+	 * spl_board_init() below sets up the console if enabled. If it isn't,
+	 * do it here. We cannot call this twice since it results in a double
+	 * banner and CI tests fail.
+	 */
+	if (!IS_ENABLED(CONFIG_SPL_BOARD_INIT))
+		preloader_console_init();
 #if !defined(CONFIG_TPL) && !CONFIG_IS_ENABLED(CPU)
 	ret = print_cpuinfo();
 	if (ret) {
Signature · 1 line
2.41.0.455.g037347b96a-goog
Reviewed-by on v5 27/46
#36 lore raw

Re: [PATCH v5 27/46] x86: Ensure SPL banner is only shown once

Quoted 7 lines · Simon Glass

Print the banner in SPL init only if the spl_board_init() function isn't enabled. The spl_board_init() function is in the same file, but is called later, by board_init_r().

This avoids printing two banners, which causes tests to fail.

Quoted 9 lines

---

Changes in v5:
- Split out banner code into a separate patch

 arch/x86/lib/spl.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
#37 lore raw

PATCH v5 28/46 x86: Init video in SPL if enabled

In reply to Simon Glass

When video is required in SPL, set this up ready for use. Ignore any problems since it may be that video is not actually available and we still want to continue on to U-Boot proper in that case.

---

Changes in v5:
- Drop code to ensure the SPL banner is only shown once

 arch/x86/lib/spl.c | 9 +++++++++
 1 file changed, 9 insertions(+)
arch/x86/lib/spl.c +9 -0
index f27501875ecc..039f219f50ae 100644
@@ -15,6 +15,7 @@
 #include <malloc.h>
 #include <spl.h>
 #include <syscon.h>
+#include <vesa.h>
 #include <asm/cpu.h>
 #include <asm/cpu_common.h>
 #include <asm/fsp2/fsp_api.h>
@@ -263,4 +264,12 @@ void spl_board_init(void)
 #ifndef CONFIG_TPL
 	preloader_console_init();
 #endif
+
+	if (CONFIG_IS_ENABLED(VIDEO)) {
+		struct udevice *dev;
+
+		/* Set up PCI video in SPL if required */
+		uclass_first_device_err(UCLASS_PCI, &dev);
+		uclass_first_device_err(UCLASS_VIDEO, &dev);
+	}
 }
Signature · 1 line
2.41.0.455.g037347b96a-goog
Reviewed-by on v5 28/46
#38 lore raw

Re: [PATCH v5 28/46] x86: Init video in SPL if enabled

Quoted 5 lines · Simon Glass

When video is required in SPL, set this up ready for use. Ignore any problems since it may be that video is not actually available and we still want to continue on to U-Boot proper in that case.

Quoted 9 lines

---

Changes in v5:
- Drop code to ensure the SPL banner is only shown once

 arch/x86/lib/spl.c | 9 +++++++++
 1 file changed, 9 insertions(+)
#39 lore raw

PATCH v5 29/46 pci: Adjust video BIOS debugging to be SPL-friendly

In reply to Simon Glass

A hex value is expected for the VGA mode. Add a 0x prefix, since the # construct is not supported in SPL. We don't want to add it, due to code-size constraints.

---

(no changes since v1)

 drivers/pci/pci_rom.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/pci/pci_rom.c +2 -2
index 0b5c7e5ab4d6..fe85c7ee3e08 100644
@@ -278,7 +278,7 @@ int dm_pci_run_vga_bios(struct udevice *dev, int (*int15_handler)(void),
 		defined(CONFIG_FRAMEBUFFER_VESA_MODE)
 	vesa_mode = CONFIG_FRAMEBUFFER_VESA_MODE;
 #endif
-	debug("Selected vesa mode %#x\n", vesa_mode);
+	debug("Selected vesa mode 0x%x\n", vesa_mode);
 
 	if (exec_method & PCI_ROM_USE_NATIVE) {
 #ifdef CONFIG_X86
@@ -329,7 +329,7 @@ int dm_pci_run_vga_bios(struct udevice *dev, int (*int15_handler)(void),
 		log_debug("done\n");
 #endif
 	}
-	debug("Final vesa mode %#x\n", mode_info.video_mode);
+	debug("Final vesa mode %x\n", mode_info.video_mode);
 	ret = 0;
 
 err:
Signature · 1 line
2.41.0.455.g037347b96a-goog
Reviewed-by on v5 29/46
#40 lore raw

Re: [PATCH v5 29/46] pci: Adjust video BIOS debugging to be SPL-friendly

Hi Simon,

Quoted 27 lines · Simon Glass

A hex value is expected for the VGA mode. Add a 0x prefix, since the # construct is not supported in SPL. We don't want to add it, due to code-size constraints.

---

(no changes since v1)

 drivers/pci/pci_rom.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/pci/pci_rom.c +1 -1
index 0b5c7e5ab4d6..fe85c7ee3e08 100644
@@ -278,7 +278,7 @@ int dm_pci_run_vga_bios(struct udevice *dev, int (*int15_handler)(void),
                defined(CONFIG_FRAMEBUFFER_VESA_MODE)
        vesa_mode = CONFIG_FRAMEBUFFER_VESA_MODE;
 #endif
-       debug("Selected vesa mode %#x\n", vesa_mode);
+       debug("Selected vesa mode 0x%x\n", vesa_mode);
 
        if (exec_method & PCI_ROM_USE_NATIVE) {
 #ifdef CONFIG_X86

drivers/pci/pci_rom.c int dm_pci_run_vga_bios(struct udevice *dev, int (*int15_handler)(void), · line 332

Quoted 5 lines
drivers/pci/pci_rom.c +1 -1
@@ -329,7 +329,7 @@ int dm_pci_run_vga_bios(struct udevice *dev, int (*int15_handler)(void),
                log_debug("done\n");
 #endif
        }
-       debug("Final vesa mode %#x\n", mode_info.video_mode);
+       debug("Final vesa mode %x\n", mode_info.video_mode);

Missing adding "0x" here?

drivers/pci/pci_rom.c int dm_pci_run_vga_bios(struct udevice *dev, int (*int15_handler)(void),

Quoted 4 lines
drivers/pci/pci_rom.c +0 -1
        ret = 0;
 
 err:
--
#41 lore raw

PATCH v5 30/46 pci: Mask the ROM address in case it is already enabled

In reply to Simon Glass

In some cases the video ROM may have been enabled previously, such as by a previous firmware stage. Use the correct address in that case.

---

(no changes since v1)

 drivers/pci/pci_rom.c | 1 +
 1 file changed, 1 insertion(+)
drivers/pci/pci_rom.c +1 -0
index fe85c7ee3e08..4a39bea6aaa6 100644
@@ -94,6 +94,7 @@ static int pci_rom_probe(struct udevice *dev, struct pci_rom_header **hdrp)
 		debug("%s: rom_address=%x\n", __func__, rom_address);
 		return -ENOENT;
 	}
+	rom_address &= PCI_ROM_ADDRESS_MASK;
 
 	/* Enable expansion ROM address decoding. */
 	dm_pci_write_config32(dev, PCI_ROM_ADDRESS,
Signature · 1 line
2.41.0.455.g037347b96a-goog
#42 lore raw

PATCH v5 31/46 x86: Enable display for QEMU 64-bit

In reply to Simon Glass

Enable the various options needed for display to work on the qemu-x86_64 board. This includes expanding the available malloc() memory in SPL, since the PCI bus must be enumerated in order to find the video device.

It also includes enabling a bloblist, so that the video parameters can be passed. This is placed at address 10000 but is not needed after U-Boot proper reads the information there.

---

(no changes since v1)

 configs/qemu-x86_64_defconfig | 6 ++++++
 1 file changed, 6 insertions(+)
configs/qemu-x86_64_defconfig +6 -0
index 5dfad36ba524..70b10c5a80cf 100644
@@ -7,6 +7,7 @@ CONFIG_MAX_CPUS=2
 CONFIG_SPL_DM_SPI=y
 CONFIG_DEFAULT_DEVICE_TREE="qemu-x86_i440fx"
 CONFIG_SPL_TEXT_BASE=0xfffd8000
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
 CONFIG_DEBUG_UART_BASE=0x3f8
 CONFIG_DEBUG_UART_CLOCK=1843200
 CONFIG_X86_RUN_64BIT=y
@@ -30,7 +31,10 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_LAST_STAGE_INIT=y
 CONFIG_PCI_INIT_R=y
+CONFIG_BLOBLIST=y
+CONFIG_BLOBLIST_ADDR=0x10000
 CONFIG_SPL_NO_BSS_LIMIT=y
+CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_CPU=y
 CONFIG_SPL_ENV_SUPPORT=y
@@ -69,10 +73,12 @@ CONFIG_LBA48=y
 CONFIG_SYS_64BIT_LBA=y
 CONFIG_CPU=y
 CONFIG_NVME_PCI=y
+CONFIG_SPL_PCI_PNP=y
 CONFIG_SPL_DM_RTC=y
 CONFIG_SYS_NS16550_PORT_MAPPED=y
 CONFIG_SPI=y
 CONFIG_USB_KEYBOARD=y
+CONFIG_SPL_VIDEO=y
 CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
 CONFIG_FRAMEBUFFER_VESA_MODE_USER=y
 CONFIG_FRAMEBUFFER_VESA_MODE=0x144
Signature · 1 line
2.41.0.455.g037347b96a-goog
#43 lore raw

PATCH v5 32/46 x86: Allow logging to be used in SPL reliably

In reply to Simon Glass

When global_data is relocated, log_head moves in memory, meaning that the items in that list point to the wrong place.

Disable logging when making the change, then reenable it afterwards, so that logging works normally.

---

(no changes since v1)

 arch/x86/lib/spl.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
arch/x86/lib/spl.c +13 -0
index 039f219f50ae..92a5e6aec711 100644
@@ -144,9 +144,22 @@ static int x86_spl_init(void)
 	 */
 	gd->new_gd = (struct global_data *)ptr;
 	memcpy(gd->new_gd, gd, sizeof(*gd));
+
+	/*
+	 * Make sure logging is disabled when we switch, since the log system
+	 * list head will move
+	 */
+	gd->new_gd->flags &= ~GD_FLG_LOG_READY;
 	arch_setup_gd(gd->new_gd);
 	gd->start_addr_sp = (ulong)ptr;
 
+	/* start up logging again, with the new list-head location */
+	ret = log_init();
+	if (ret) {
+		log_debug("Log setup failed (err=%d)\n", ret);
+		return ret;
+	}
+
 	if (_LOG_DEBUG) {
 		ret = mtrr_list(mtrr_get_var_count(), MP_SELECT_BSP);
 		if (ret)
Signature · 1 line
2.41.0.455.g037347b96a-goog
#44 lore raw

PATCH v5 33/46 fs: fat: Shrink the size of a few strings

In reply to Simon Glass

To save a few bytes, replace Error with ** and try to use the same string for multiple messages where possible.

---

(no changes since v2)

Changes in v2:
- Drop ** in strings and use log_err() for messages

 fs/fat/fat.c       | 20 +++++++++++---------
 fs/fat/fat_write.c | 14 ++++----------
 2 files changed, 15 insertions(+), 19 deletions(-)
fs/fat/fat.c +11 -9
index 2da93dae3cf3..d1476aa433d6 100644
@@ -8,6 +8,8 @@
  * 2003-03-10 - [email protected] - ported to uboot
  */
 
+#define LOG_CATEGORY	LOGC_FS
+
 #include <common.h>
 #include <blk.h>
 #include <config.h>
@@ -97,8 +99,8 @@ int fat_register_device(struct blk_desc *dev_desc, int part_no)
 	/* Read the partition table, if present */
 	if (part_get_info(dev_desc, part_no, &info)) {
 		if (part_no != 0) {
-			printf("** Partition %d not valid on device %d **\n",
-					part_no, dev_desc->devnum);
+			log_err("Partition %d invalid on device %d\n", part_no,
+				dev_desc->devnum);
 			return -1;
 		}
 
@@ -168,7 +170,7 @@ static __u32 get_fatent(fsdata *mydata, __u32 entry)
 	__u32 ret = 0x00;
 
 	if (CHECK_CLUST(entry, mydata->fatsize)) {
-		printf("Error: Invalid FAT entry: 0x%08x\n", entry);
+		log_err("Invalid FAT entry: %#08x\n", entry);
 		return ret;
 	}
 
@@ -586,19 +588,19 @@ static int get_fs_info(fsdata *mydata)
 	mydata->sect_size = (bs.sector_size[1] << 8) + bs.sector_size[0];
 	mydata->clust_size = bs.cluster_size;
 	if (mydata->sect_size != cur_part_info.blksz) {
-		printf("Error: FAT sector size mismatch (fs=%hu, dev=%lu)\n",
-				mydata->sect_size, cur_part_info.blksz);
+		log_err("FAT sector size mismatch (fs=%u, dev=%lu)\n",
+			mydata->sect_size, cur_part_info.blksz);
 		return -1;
 	}
 	if (mydata->clust_size == 0) {
-		printf("Error: FAT cluster size not set\n");
+		log_err("FAT cluster size not set\n");
 		return -1;
 	}
 	if ((unsigned int)mydata->clust_size * mydata->sect_size >
 	    MAX_CLUSTSIZE) {
-		printf("Error: FAT cluster size too big (cs=%u, max=%u)\n",
-		       (unsigned int)mydata->clust_size * mydata->sect_size,
-		       MAX_CLUSTSIZE);
+		log_err("FAT cluster size too big (cs=%u, max=%u)\n",
+			(uint)mydata->clust_size * mydata->sect_size,
+			MAX_CLUSTSIZE);
 		return -1;
 	}
 
fs/fat/fat_write.c +4 -10
index 413fc432ebed..e2a9913f807a 100644
@@ -1571,8 +1571,9 @@ int fat_unlink(const char *filename)
 	char *filename_copy, *dirname, *basename;
 
 	filename_copy = strdup(filename);
-	if (!filename_copy) {
-		printf("Error: allocating memory\n");
+	itr = malloc_cache_aligned(sizeof(fat_itr));
+	if (!itr || !filename_copy) {
+		printf("Error: out of memory\n");
 		ret = -ENOMEM;
 		goto exit;
 	}
@@ -1584,13 +1585,6 @@ int fat_unlink(const char *filename)
 		goto exit;
 	}
 
-	itr = malloc_cache_aligned(sizeof(fat_itr));
-	if (!itr) {
-		printf("Error: allocating memory\n");
-		ret = -ENOMEM;
-		goto exit;
-	}
-
 	ret = fat_itr_root(itr, &fsdata);
 	if (ret)
 		goto exit;
@@ -1605,7 +1599,7 @@ int fat_unlink(const char *filename)
 	}
 
 	if (!find_directory_entry(itr, basename)) {
-		printf("%s: doesn't exist\n", basename);
+		log_err("%s: doesn't exist (%d)\n", basename, -ENOENT);
 		ret = -ENOENT;
 		goto exit;
 	}
Signature · 1 line
2.41.0.455.g037347b96a-goog
#45 lore raw

PATCH v5 34/46 fs: fat: Support reading from a larger block size

In reply to Simon Glass

At present it is not possible to read from some CDROM drives since the FAT sector size does not match the media's block size. Add a conversion option for this, so that reading is possible.

This does increase SPL size for read-only FAT support by 25 bytes but all but 6 are covered by the previous patch. We could reduce the overhead of this feature to 0 bytes by making the code uglier (using a static variable).

---

(no changes since v2)

Changes in v2:
- Use log_warning() for the warning

 fs/fat/Kconfig     |  13 ++++++
 fs/fat/fat.c       | 107 ++++++++++++++++++++++++++++++++++++++++-----
 fs/fat/fat_write.c |   8 ++--
 3 files changed, 114 insertions(+), 14 deletions(-)
fs/fat/Kconfig +13 -0
index 9bb11eac9f7a..b0aa888c6cc4 100644
@@ -22,3 +22,16 @@ config FS_FAT_MAX_CLUSTSIZE
 	  is the smallest amount of disk space that can be used to hold a
 	  file. Unless you have an extremely tight memory memory constraints,
 	  leave the default.
+
+config FAT_BLK_XLATE
+	bool "Enable FAT filesystem on a device with a larger block size"
+	depends on FS_FAT
+	help
+	  This provides a simple translation mechanism for reading FAT
+	  filesystems which don't use the same sector size as the underlying
+	  media. For example, the FAT filesystem may use 512 bytes but the
+	  media uses 2048, e.g. on a CDROM drive.
+
+	  This only supports the case where the FAT filesystem's sector size is
+	  smaller than the media's block size. It does not support creating or
+	  writing files.
fs/fat/fat.c +96 -11

167 lines not on this page · raw message

fs/fat/fat_write.c +5 -3
index e2a9913f807a..95f7a60caa2b 100644
@@ -477,7 +477,7 @@ static int set_fatent_value(fsdata *mydata, __u32 entry, __u32 entry_value)
 
 		startblock += mydata->fat_sect;
 
-		if (disk_read(startblock, getsize, bufptr) < 0) {
+		if (disk_read(NULL, startblock, getsize, bufptr) < 0) {
 			debug("Error reading FAT blocks\n");
 			return -1;
 		}
@@ -712,7 +712,8 @@ get_set_cluster(fsdata *mydata, __u32 clustnum, loff_t pos, __u8 *buffer,
 	/* partial write at beginning */
 	if (pos) {
 		wsize = min(bytesperclust - pos, size);
-		ret = disk_read(startsect, mydata->clust_size, tmpbuf_cluster);
+		ret = disk_read(NULL, startsect, mydata->clust_size,
+				tmpbuf_cluster);
 		if (ret != mydata->clust_size) {
 			debug("Error reading data (got %d)\n", ret);
 			return -1;
@@ -778,7 +779,8 @@ get_set_cluster(fsdata *mydata, __u32 clustnum, loff_t pos, __u8 *buffer,
 	/* partial write at end */
 	if (size) {
 		wsize = size;
-		ret = disk_read(startsect, mydata->clust_size, tmpbuf_cluster);
+		ret = disk_read(NULL, startsect, mydata->clust_size,
+				tmpbuf_cluster);
 		if (ret != mydata->clust_size) {
 			debug("Error reading data (got %d)\n", ret);
 			return -1;
Signature · 1 line
2.41.0.455.g037347b96a-goog
#46 lore raw

PATCH v5 35/46 x86: Enable useful options for qemu-86_64

In reply to Simon Glass

This build can be used to boot standard distro builds, since these are mostly 64-bit these days. Enable some more options, so that all possible EFI UUIDs are decoded, we get a proper printf() in SPL, can search memory for tables, support the full set of standard-boot features, have full logging and can boot from CDROM media.

---

(no changes since v1)

 configs/qemu-x86_64_defconfig | 8 ++++++++
 1 file changed, 8 insertions(+)
configs/qemu-x86_64_defconfig +8 -0
index 70b10c5a80cf..b1400876a2ff 100644
@@ -20,6 +20,7 @@ CONFIG_GENERATE_MP_TABLE=y
 CONFIG_X86_OFFSET_U_BOOT=0xfff00000
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT=y
+CONFIG_BOOTSTD_FULL=y
 CONFIG_SYS_MONITOR_BASE=0x01110000
 CONFIG_BOOTSTD_DEFAULTS=y
 CONFIG_BOOTSTAGE=y
@@ -28,6 +29,9 @@ CONFIG_SHOW_BOOT_PROGRESS=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_LOG=y
+CONFIG_LOGF_FUNC=y
+CONFIG_SPL_LOG=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_LAST_STAGE_INIT=y
 CONFIG_PCI_INIT_R=y
@@ -47,11 +51,13 @@ CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_CPU=y
 CONFIG_CMD_BOOTEFI_SELFTEST=y
 CONFIG_CMD_NVEDIT_EFI=y
+CONFIG_CMD_MEM_SEARCH=y
 CONFIG_CMD_IDE=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_BOOTP_BOOTFILESIZE=y
+CONFIG_CMD_EFIDEBUG=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_QFW=y
 CONFIG_CMD_BOOTSTAGE=y
@@ -83,5 +89,7 @@ CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
 CONFIG_FRAMEBUFFER_VESA_MODE_USER=y
 CONFIG_FRAMEBUFFER_VESA_MODE=0x144
 CONFIG_CONSOLE_SCROLL_LINES=5
+CONFIG_FAT_BLK_XLATE=y
+# CONFIG_SPL_USE_TINY_PRINTF is not set
 CONFIG_GENERATE_ACPI_TABLE=y
 # CONFIG_GZIP is not set
Signature · 1 line
2.41.0.455.g037347b96a-goog
#47 lore raw

PATCH v5 36/46 x86: Refactor table-writing code a little

In reply to Simon Glass

The implementation of write_tables() is confusing because it uses the rom_table_start variable as the address pointer as it progresses.

Rename it to rom_addr to make the code clearer. Move the rom_table_end variable into the block where it is used.

Also update logging to use the ACPI category, now that it is available.

---

Changes in v5:
- Fix 'litlle' typo in subject
- Correct indentation

Changes in v3:
- Add new patch to refactor table-writing code a ltitle

 arch/x86/lib/tables.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)
arch/x86/lib/tables.c +14 -14
index ea834a5035f5..772c04f1e556 100644
@@ -3,7 +3,7 @@
  * Copyright (C) 2015, Bin Meng <[email protected]>
  */
 
-#define LOG_CATEGORY LOGC_BOARD
+#define LOG_CATEGORY LOGC_ACPI
 
 #include <common.h>
 #include <bloblist.h>
@@ -78,33 +78,33 @@ void table_fill_string(char *dest, const char *src, size_t n, char pad)
 
 int write_tables(void)
 {
-	u32 rom_table_start;
-	u32 rom_table_end;
 	u32 high_table, table_size;
 	struct memory_area cfg_tables[ARRAY_SIZE(table_list) + 1];
+	u32 rom_addr;
 	int i;
 
-	rom_table_start = ROM_TABLE_ADDR;
+	rom_addr = ROM_TABLE_ADDR;
 
-	debug("Writing tables to %x:\n", rom_table_start);
+	debug("Writing tables to %x:\n", rom_addr);
 	for (i = 0; i < ARRAY_SIZE(table_list); i++) {
 		const struct table_info *table = &table_list[i];
 		int size = table->size ? : CONFIG_ROM_TABLE_SIZE;
+		u32 rom_table_end;
 
 		if (IS_ENABLED(CONFIG_BLOBLIST_TABLES) && table->tag) {
-			rom_table_start = (ulong)bloblist_add(table->tag, size,
-							      table->align);
-			if (!rom_table_start)
+			rom_addr = (ulong)bloblist_add(table->tag, size,
+						       table->align);
+			if (!rom_addr)
 				return log_msg_ret("bloblist", -ENOBUFS);
 		}
-		rom_table_end = table->write(rom_table_start);
+		rom_table_end = table->write(rom_addr);
 		if (!rom_table_end) {
 			log_err("Can't create configuration table %d\n", i);
 			return -EINTR;
 		}
 
 		if (IS_ENABLED(CONFIG_SEABIOS)) {
-			table_size = rom_table_end - rom_table_start;
+			table_size = rom_table_end - rom_addr;
 			high_table = (u32)(ulong)high_table_malloc(table_size);
 			if (high_table) {
 				if (!table->write(high_table)) {
@@ -123,13 +123,13 @@ int write_tables(void)
 		}
 
 		debug("- wrote '%s' to %x, end %x\n", table->name,
-		      rom_table_start, rom_table_end);
-		if (rom_table_end - rom_table_start > size) {
+		      rom_addr, rom_table_end);
+		if (rom_table_end - rom_addr > size) {
 			log_err("Out of space for configuration tables: need %x, have %x\n",
-				rom_table_end - rom_table_start, size);
+				rom_table_end - rom_addr, size);
 			return log_msg_ret("bloblist", -ENOSPC);
 		}
-		rom_table_start = rom_table_end;
+		rom_addr = rom_table_end;
 	}
 
 	if (IS_ENABLED(CONFIG_SEABIOS)) {
Signature · 1 line
2.41.0.455.g037347b96a-goog
#48 lore raw

PATCH v5 37/46 x86: Record the start and end of the tables

In reply to Simon Glass

The ACPI tables are special in that they are passed to EFI as a separate piece, independent of other tables.

Also they can be spread over two areas of memory, e.g. with QEMU we end up with tables kept in high memory as well.

Add new global_data fields to hold this information and update the bdinfo command to show the table areas.

Move the rom_table_end variable into the loop that uses it.

---

Changes in v5:
- Add a comment about QFW putting its tables up high
- Add a comment that the bloblist is always in high memory

Changes in v3:
- Adjust the code to handle qemu writing a pointer to tables in memory

Changes in v2:
- Handle the case where the tables are in the bloblist

 arch/sandbox/include/asm/global_data.h |  4 ++++
 arch/x86/include/asm/global_data.h     |  4 ++++
 arch/x86/lib/bdinfo.c                  |  4 ++++
 arch/x86/lib/tables.c                  | 20 +++++++++++++++++++-
 drivers/misc/qfw.c                     |  9 +++++++++
 5 files changed, 40 insertions(+), 1 deletion(-)
arch/sandbox/include/asm/global_data.h +4 -0
index f4ce72d56602..f0ab3ba5c146 100644
@@ -13,6 +13,10 @@
 struct arch_global_data {
 	uint8_t		*ram_buf;	/* emulated RAM buffer */
 	void		*text_base;	/* pointer to base of text region */
+	ulong table_start;		/* Start address of x86 tables */
+	ulong table_end;		/* End address of x86 tables */
+	ulong table_start_high;		/* Start address of high x86 tables */
+	ulong table_end_high;		/* End address of high x86 tables */
 };
 
 #include <asm-generic/global_data.h>
arch/x86/include/asm/global_data.h +4 -0
index 22d103df4ee8..ea58259ad774 100644
@@ -123,6 +123,10 @@ struct arch_global_data {
 #endif
 	void *itss_priv;		/* Private ITSS data pointer */
 	ulong coreboot_table;		/* Address of coreboot table */
+	ulong table_start;		/* Start address of x86 tables */
+	ulong table_end;		/* End address of x86 tables */
+	ulong table_start_high;		/* Start address of high x86 tables */
+	ulong table_end_high;		/* End address of high x86 tables */
 };
 
 #endif
arch/x86/lib/bdinfo.c +4 -0
index a20d0954416a..124058442c55 100644
@@ -23,6 +23,10 @@ void arch_print_bdinfo(void)
 	bdinfo_print_str(" name", cpu_vendor_name(gd->arch.x86_vendor));
 	bdinfo_print_num_l("model", gd->arch.x86_model);
 	bdinfo_print_num_l("phys_addr in bits", cpu_phys_address_size());
+	bdinfo_print_num_l("table start", gd->arch.table_start);
+	bdinfo_print_num_l("table end", gd->arch.table_end);
+	bdinfo_print_num_l(" high start", gd->arch.table_start_high);
+	bdinfo_print_num_l(" high end", gd->arch.table_end_high);
 
 	if (IS_ENABLED(CONFIG_EFI_STUB))
 		efi_show_bdinfo();
arch/x86/lib/tables.c +19 -1
index 772c04f1e556..67bc0a72aebc 100644
@@ -54,6 +54,10 @@ static struct table_info table_list[] = {
 #ifdef CONFIG_GENERATE_MP_TABLE
 	{ "mp", write_mp_table, },
 #endif
+	/*
+	 * tables which can go in the bloblist must be last in this list, so
+	 * that the calculation of gd->table_end works properly
+	 */
 #ifdef CONFIG_GENERATE_ACPI_TABLE
 	{ "acpi", write_acpi_tables, BLOBLISTT_ACPI_TABLES, 0x10000, 0x1000},
 #endif
@@ -80,10 +84,12 @@ int write_tables(void)
 {
 	u32 high_table, table_size;
 	struct memory_area cfg_tables[ARRAY_SIZE(table_list) + 1];
+	bool use_high = false;
 	u32 rom_addr;
 	int i;
 
-	rom_addr = ROM_TABLE_ADDR;
+	gd->arch.table_start = ROM_TABLE_ADDR;
+	rom_addr = gd->arch.table_start;
 
 	debug("Writing tables to %x:\n", rom_addr);
 	for (i = 0; i < ARRAY_SIZE(table_list); i++) {
@@ -92,10 +98,17 @@ int write_tables(void)
 		u32 rom_table_end;
 
 		if (IS_ENABLED(CONFIG_BLOBLIST_TABLES) && table->tag) {
+			if (!gd->arch.table_end)
+				gd->arch.table_end = rom_addr;
 			rom_addr = (ulong)bloblist_add(table->tag, size,
 						       table->align);
 			if (!rom_addr)
 				return log_msg_ret("bloblist", -ENOBUFS);
+
+			/* the bloblist is always in high memory */
+			use_high = true;
+			if (!gd->arch.table_start_high)
+				gd->arch.table_start_high = rom_addr;
 		}
 		rom_table_end = table->write(rom_addr);
 		if (!rom_table_end) {
@@ -132,6 +145,11 @@ int write_tables(void)
 		rom_addr = rom_table_end;
 	}
 
+	if (use_high)
+		gd->arch.table_end_high = rom_addr;
+	else
+		gd->arch.table_end = rom_addr;
+
 	if (IS_ENABLED(CONFIG_SEABIOS)) {
 		/* make sure the last item is zero */
 		cfg_tables[i].size = 0;
drivers/misc/qfw.c +9 -0
index 0a93feeb4b2e..7c01bf23d53b 100644
@@ -65,6 +65,11 @@ static int bios_linker_allocate(struct udevice *dev,
 			printf("error: allocating resource\n");
 			return -ENOMEM;
 		}
+		if (aligned_addr < gd->arch.table_start_high)
+			gd->arch.table_start_high = aligned_addr;
+		if (aligned_addr + size > gd->arch.table_end_high)
+			gd->arch.table_end_high = aligned_addr + size;
+
 	} else if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) {
 		aligned_addr = ALIGN(*addr, align);
 	} else {
@@ -189,6 +194,10 @@ ulong write_acpi_tables(ulong addr)
 		return addr;
 	}
 
+	/* QFW always puts tables at high addresses */
+	gd->arch.table_start_high = (ulong)table_loader;
+	gd->arch.table_end_high = (ulong)table_loader;
+
 	qfw_read_entry(dev, be16_to_cpu(file->cfg.select), size, table_loader);
 
 	for (i = 0; i < (size / sizeof(*entry)); i++) {
Signature · 1 line
2.41.0.455.g037347b96a-goog
Reviewed-by on v5 37/46
#49 lore raw

Re: [PATCH v5 37/46] x86: Record the start and end of the tables

Quoted 25 lines · Simon Glass

The ACPI tables are special in that they are passed to EFI as a separate piece, independent of other tables.

Also they can be spread over two areas of memory, e.g. with QEMU we end up with tables kept in high memory as well.

Add new global_data fields to hold this information and update the bdinfo command to show the table areas.

Move the rom_table_end variable into the loop that uses it.

---

Changes in v5:
- Add a comment about QFW putting its tables up high
- Add a comment that the bloblist is always in high memory

Changes in v3:
- Adjust the code to handle qemu writing a pointer to tables in memory

Changes in v2:
- Handle the case where the tables are in the bloblist

Quoted 7 lines
 arch/sandbox/include/asm/global_data.h |  4 ++++
 arch/x86/include/asm/global_data.h     |  4 ++++
 arch/x86/lib/bdinfo.c                  |  4 ++++
 arch/x86/lib/tables.c                  | 20 +++++++++++++++++++-
 drivers/misc/qfw.c                     |  9 +++++++++
 5 files changed, 40 insertions(+), 1 deletion(-)
#50 lore raw

PATCH v5 38/46 x86: Convert some debug statements to use logging

In reply to Simon Glass

Move from using debug() to log_debug() so that we don't have to use the __func__ parameter and can access other logging features.

---

Changes in v5:
- Use "gpio" for log return

Changes in v2:
- Add new patch to convert some debug statements to use logging

 arch/x86/cpu/intel_common/mrc.c | 10 +++++-----
 arch/x86/cpu/ivybridge/sdram.c  |  4 +++-
 arch/x86/lib/mrccache.c         |  6 ++++--
 arch/x86/lib/spl.c              | 22 ++++++++++++++--------
 drivers/gpio/intel_ich6_gpio.c  |  5 +++--
 drivers/pch/pch9.c              |  6 ++++--
 6 files changed, 33 insertions(+), 20 deletions(-)
arch/x86/cpu/intel_common/mrc.c +5 -5
index 69405d740b47..56cc253831aa 100644
@@ -3,6 +3,8 @@
  * Copyright (c) 2016 Google, Inc
  */
 
+#define LOG_CATEGORY	UCLASS_RAM
+
 #include <common.h>
 #include <dm.h>
 #include <init.h>
@@ -144,12 +146,10 @@ int mrc_locate_spd(struct udevice *dev, int size, const void **spd_datap)
 
 	ret = gpio_request_list_by_name(dev, "board-id-gpios", desc,
 					ARRAY_SIZE(desc), GPIOD_IS_IN);
-	if (ret < 0) {
-		debug("%s: gpio ret=%d\n", __func__, ret);
-		return ret;
-	}
+	if (ret < 0)
+		return log_msg_ret("gpio", ret);
 	spd_index = dm_gpio_get_values_as_int(desc, ret);
-	debug("spd index %d\n", spd_index);
+	log_debug("spd index %d\n", spd_index);
 
 	node = fdt_first_subnode(blob, dev_of_offset(dev));
 	if (node < 0)
arch/x86/cpu/ivybridge/sdram.c +3 -1
index 1a0ec433e654..0718aefbb1fe 100644
@@ -9,6 +9,8 @@
  * Copyright (C) 2011 Google Inc.
  */
 
+#define LOG_CATEGORY	UCLASS_RAM
+
 #include <common.h>
 #include <dm.h>
 #include <errno.h>
@@ -213,7 +215,7 @@ static int copy_spd(struct udevice *dev, struct pei_data *peid)
 
 	ret = mrc_locate_spd(dev, sizeof(peid->spd_data[0]), &data);
 	if (ret) {
-		debug("%s: Could not locate SPD (ret=%d)\n", __func__, ret);
+		log_debug("Could not locate SPD (err=%d)\n", ret);
 		return ret;
 	}
 
arch/x86/lib/mrccache.c +4 -2
index 2f6f6880003e..6494b8d26341 100644
@@ -6,6 +6,8 @@
  * Copyright (C) 2015 Bin Meng <[email protected]>
  */
 
+#define LOG_CATEGORY	UCLASS_RAM
+
 #include <common.h>
 #include <dm.h>
 #include <errno.h>
@@ -197,8 +199,8 @@ static void mrccache_setup(struct mrc_output *mrc, void *data)
 	cache->signature = MRC_DATA_SIGNATURE;
 	cache->data_size = mrc->len;
 	checksum = compute_ip_checksum(mrc->buf, cache->data_size);
-	debug("Saving %d bytes for MRC output data, checksum %04x\n",
-	      cache->data_size, checksum);
+	log_debug("Saving %d bytes for MRC output data, checksum %04x\n",
+		  cache->data_size, checksum);
 	cache->checksum = checksum;
 	cache->reserved = 0;
 	memcpy(cache->data, mrc->buf, cache->data_size);
arch/x86/lib/spl.c +14 -8
index 92a5e6aec711..ba3434b055c3 100644
@@ -3,6 +3,8 @@
  * Copyright (c) 2016 Google, Inc
  */
 
+#define LOG_CATEGORY	LOGC_BOOT
+
 #include <common.h>
 #include <cpu_func.h>
 #include <debug_uart.h>
@@ -76,25 +78,25 @@ static int x86_spl_init(void)
 #endif
 	int ret;
 
-	debug("%s starting\n", __func__);
+	log_debug("x86 spl starting\n");
 	if (IS_ENABLED(TPL))
 		ret = x86_cpu_reinit_f();
 	else
 		ret = x86_cpu_init_f();
 	ret = spl_init();
 	if (ret) {
-		debug("%s: spl_init() failed\n", __func__);
+		log_debug("spl_init() failed (err=%d)\n", ret);
 		return ret;
 	}
 	ret = arch_cpu_init();
 	if (ret) {
-		debug("%s: arch_cpu_init() failed\n", __func__);
+		log_debug("arch_cpu_init() failed (err=%d)\n", ret);
 		return ret;
 	}
 #ifndef CONFIG_TPL
 	ret = fsp_setup_pinctrl(NULL, NULL);
 	if (ret) {
-		debug("%s: fsp_setup_pinctrl() failed\n", __func__);
+		log_debug("fsp_setup_pinctrl() failed (err=%d)\n", ret);
 		return ret;
 	}
 #endif
@@ -108,23 +110,25 @@ static int x86_spl_init(void)
 #if !defined(CONFIG_TPL) && !CONFIG_IS_ENABLED(CPU)
 	ret = print_cpuinfo();
 	if (ret) {
-		debug("%s: print_cpuinfo() failed\n", __func__);
+		log_debug("print_cpuinfo() failed (err=%d)\n", ret);
 		return ret;
 	}
 #endif
 	ret = dram_init();
 	if (ret) {
-		debug("%s: dram_init() failed\n", __func__);
+		log_debug("dram_init() failed (err=%d)\n", ret);
 		return ret;
 	}
+	log_debug("mrc\n");
 	if (IS_ENABLED(CONFIG_ENABLE_MRC_CACHE)) {
 		ret = mrccache_spl_save();
 		if (ret)
-			debug("%s: Failed to write to mrccache (err=%d)\n",
-			      __func__, ret);
+			log_debug("Failed to write to mrccache (err=%d)\n",
+				  ret);
 	}
 
 #ifndef CONFIG_SYS_COREBOOT
+	log_debug("bss\n");
 	debug("BSS clear from %lx to %lx len %lx\n", (ulong)&__bss_start,
 	      (ulong)&__bss_end, (ulong)&__bss_end - (ulong)&__bss_start);
 	memset(&__bss_start, 0, (ulong)&__bss_end - (ulong)&__bss_start);
@@ -145,6 +149,7 @@ static int x86_spl_init(void)
 	gd->new_gd = (struct global_data *)ptr;
 	memcpy(gd->new_gd, gd, sizeof(*gd));
 
+	log_debug("logging\n");
 	/*
 	 * Make sure logging is disabled when we switch, since the log system
 	 * list head will move
@@ -184,6 +189,7 @@ static int x86_spl_init(void)
 		debug("Failed to set CPU frequency (err=%d)\n", ret);
 # endif
 #endif
+	log_debug("done\n");
 
 	return 0;
 }
drivers/gpio/intel_ich6_gpio.c +3 -2
index 63a07b9592a0..2ed0d0bea9a5 100644
@@ -26,6 +26,8 @@
  * reserved or subject to arcane restrictions.
  */
 
+#define LOG_CATEGORY	UCLASS_GPIO
+
 #include <common.h>
 #include <dm.h>
 #include <errno.h>
@@ -155,8 +157,7 @@ static int ich6_gpio_request(struct udevice *dev, unsigned offset,
 	 */
 	tmplong = inl(bank->use_sel);
 	if (!(tmplong & (1UL << offset))) {
-		debug("%s: gpio %d is reserved for internal use\n", __func__,
-		      offset);
+		log_debug("gpio %d is reserved for internal use\n", offset);
 		return -EPERM;
 	}
 
drivers/pch/pch9.c +4 -2
index 3bd011518b3a..3137eb2c28f5 100644
@@ -3,6 +3,8 @@
  * Copyright (C) 2014 Google, Inc
  */
 
+#define LOG_CATEGORY	UCLASS_PCH
+
 #include <common.h>
 #include <dm.h>
 #include <log.h>
@@ -38,7 +40,7 @@ static int pch9_get_gpio_base(struct udevice *dev, u32 *gbasep)
 	 */
 	dm_pci_read_config32(dev, GPIO_BASE, &base);
 	if (base == 0x00000000 || base == 0xffffffff) {
-		debug("%s: unexpected BASE value\n", __func__);
+		log_debug("unexpected BASE value\n");
 		return -ENODEV;
 	}
 
@@ -59,7 +61,7 @@ static int pch9_get_io_base(struct udevice *dev, u32 *iobasep)
 
 	dm_pci_read_config32(dev, IO_BASE, &base);
 	if (base == 0x00000000 || base == 0xffffffff) {
-		debug("%s: unexpected BASE value\n", __func__);
+		log_debug("unexpected BASE value\n");
 		return -ENODEV;
 	}
 
Signature · 1 line
2.41.0.455.g037347b96a-goog
#51 lore raw

PATCH v5 39/46 x86: link: Support Micron memory

In reply to Simon Glass

Add the required tag so that micron memory can be set up correctly.

---

(no changes since v2)

Changes in v2:
- Add new patch to support Micron memory

 arch/x86/dts/chromebook_link.dts | 1 +
 1 file changed, 1 insertion(+)
arch/x86/dts/chromebook_link.dts +1 -0
index 36956f40bd70..c904b7d0b69d 100644
@@ -314,6 +314,7 @@
 						00 00 00 00 00 00 00 00];
 					};
 				micron_4Gb_1600_1.35v_x16 {
+					bootph-all;
 					reg = <2>;
 					data = [92 11 0b 03 04 19 02 02
 						03 11 01 08 0a 00 fe 00
Signature · 1 line
2.41.0.455.g037347b96a-goog
#52 lore raw

PATCH v5 40/46 x86: Make sure that the LPC is active before SDRAM init

In reply to Simon Glass

Some boards need to access GPIOs to determine which SDRAM is fitted to the board, for example chromebook_link. Probe this device (if it exists) to make sure that this works as expected.

---

(no changes since v2)

Changes in v2:
- Add new patch to make sure that the LPC is active before SDRAM init

 arch/x86/lib/spl.c | 9 +++++++++
 1 file changed, 9 insertions(+)
arch/x86/lib/spl.c +9 -0
index ba3434b055c3..b6812bb8ca2b 100644
@@ -65,6 +65,8 @@ static int set_max_freq(void)
 
 static int x86_spl_init(void)
 {
+	struct udevice *dev;
+
 #ifndef CONFIG_TPL
 	/*
 	 * TODO([email protected]): We use this area of RAM for the stack
@@ -114,6 +116,13 @@ static int x86_spl_init(void)
 		return ret;
 	}
 #endif
+	/* probe the LPC so we get the GPIO_BASE set up correctly */
+	ret = uclass_first_device_err(UCLASS_LPC, &dev);
+	if (ret && ret != -ENODEV) {
+		log_debug("lpc probe failed\n");
+		return ret;
+	}
+
 	ret = dram_init();
 	if (ret) {
 		log_debug("dram_init() failed (err=%d)\n", ret);
Signature · 1 line
2.41.0.455.g037347b96a-goog
#53 lore raw

PATCH v5 41/46 log: Support outputing function names in SPL

In reply to Simon Glass

The output is garbled when tiny printf() is used. Correct this by adding a special case.

---

(no changes since v2)

Changes in v2:
- Add new patch to support outputing function names in SPL

 common/log_console.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
common/log_console.c +8 -2
index f1dcc04b97c9..bb091ce21a4a 100644
@@ -37,8 +37,14 @@ static int log_console_emit(struct log_device *ldev, struct log_rec *rec)
 			printf("%s:", rec->file);
 		if (fmt & BIT(LOGF_LINE))
 			printf("%d-", rec->line);
-		if (fmt & BIT(LOGF_FUNC))
-			printf("%*s()", CONFIG_LOGF_FUNC_PAD, rec->func);
+		if (fmt & BIT(LOGF_FUNC)) {
+			if (CONFIG_IS_ENABLED(USE_TINY_PRINTF)) {
+				printf("%s()", rec->func);
+			} else {
+				printf("%*s()", CONFIG_LOGF_FUNC_PAD,
+				       rec->func);
+			}
+		}
 	}
 	if (fmt & BIT(LOGF_MSG))
 		printf("%s%s", add_space ? " " : "", rec->msg);
Signature · 1 line
2.41.0.455.g037347b96a-goog
#54 lore raw

PATCH v5 42/46 sandbox: Correct header order in board file

In reply to Simon Glass

Fix the header order in this file.

---

(no changes since v1)

 board/sandbox/sandbox.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
board/sandbox/sandbox.c +3 -3
index c7b6cb78fff5..54c119daeeeb 100644
@@ -11,16 +11,16 @@
 #include <efi.h>
 #include <efi_loader.h>
 #include <env_internal.h>
+#include <extension_board.h>
 #include <init.h>
 #include <led.h>
+#include <malloc.h>
 #include <os.h>
 #include <asm/global_data.h>
 #include <asm/test.h>
 #include <asm/u-boot-sandbox.h>
 #include <linux/kernel.h>
-#include <malloc.h>
-
-#include <extension_board.h>
+#include <linux/sizes.h>
 
 /*
  * Pointer to initial global data area
Signature · 1 line
2.41.0.455.g037347b96a-goog
#55 lore raw

PATCH v5 43/46 sandbox: Install ACPI tables on startup

In reply to Simon Glass

With x86 we set up the ACPI tables on startup so they can be examined. Do the same with sandbox, so it is consistent.

---

(no changes since v1)

 board/sandbox/sandbox.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
board/sandbox/sandbox.c +16 -0
index 54c119daeeeb..9d58860451c5 100644
@@ -15,7 +15,9 @@
 #include <init.h>
 #include <led.h>
 #include <malloc.h>
+#include <mapmem.h>
 #include <os.h>
+#include <acpi/acpi_table.h>
 #include <asm/global_data.h>
 #include <asm/test.h>
 #include <asm/u-boot-sandbox.h>
@@ -154,6 +156,8 @@ int extension_board_scan(struct list_head *extension_list)
 int board_late_init(void)
 {
 	struct udevice *dev;
+	ulong addr, end;
+	void *ptr;
 	int ret;
 
 	ret = uclass_first_device_err(UCLASS_CROS_EC, &dev);
@@ -166,6 +170,18 @@ int board_late_init(void)
 		panic("Cannot init cros-ec device");
 		return -1;
 	}
+
+	if (IS_ENABLED(CONFIG_GENERATE_ACPI_TABLE)) {
+		/* Reserve 64K for ACPI tables, aligned to a 4K boundary */
+		ptr = memalign(SZ_4K, SZ_64K);
+		addr = map_to_sysmem(ptr);
+
+		/* Generate ACPI tables */
+		end = write_acpi_tables(addr);
+		gd->arch.table_start = addr;
+		gd->arch.table_end = addr;
+	}
+
 	return 0;
 }
 #endif
Signature · 1 line
2.41.0.455.g037347b96a-goog
#56 lore raw

PATCH v5 44/46 efi: Use the installed ACPI tables

In reply to Simon Glass

U-Boot sets up the ACPI tables during startup. Rather than creating a new set, install the existing ones. Create a memory-map record to cover the tables.

---

(no changes since v4)

Changes in v4:
- Drop patch "video: Allow building video drivers for SPL"

Changes in v2:
- Drop patch to set high bits of the mtrr base register, for now

 lib/efi_loader/efi_acpi.c | 33 +++++++++++++++++++--------------
 1 file changed, 19 insertions(+), 14 deletions(-)
lib/efi_loader/efi_acpi.c +19 -14
index 2ddc3502b5df..f755af76f866 100644
@@ -10,6 +10,9 @@
 #include <log.h>
 #include <mapmem.h>
 #include <acpi/acpi_table.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
 
 static const efi_guid_t acpi_guid = EFI_ACPI_TABLE_GUID;
 
@@ -20,26 +23,28 @@ static const efi_guid_t acpi_guid = EFI_ACPI_TABLE_GUID;
  */
 efi_status_t efi_acpi_register(void)
 {
-	/* Map within the low 32 bits, to allow for 32bit ACPI tables */
-	u64 acpi = U32_MAX;
+	ulong addr, start, end;
 	efi_status_t ret;
-	ulong addr;
 
-	/* Reserve 64kiB page for ACPI */
-	ret = efi_allocate_pages(EFI_ALLOCATE_MAX_ADDRESS,
-				 EFI_ACPI_RECLAIM_MEMORY, 16, &acpi);
+	/* Mark space used for tables */
+	start = ALIGN_DOWN(gd->arch.table_start, EFI_PAGE_MASK);
+	end = ALIGN(gd->arch.table_end, EFI_PAGE_MASK);
+	ret = efi_add_memory_map(start, end - start, EFI_ACPI_RECLAIM_MEMORY);
 	if (ret != EFI_SUCCESS)
 		return ret;
+	if (gd->arch.table_start_high) {
+		start = ALIGN_DOWN(gd->arch.table_start_high, EFI_PAGE_MASK);
+		end = ALIGN(gd->arch.table_end_high, EFI_PAGE_MASK);
+		ret = efi_add_memory_map(start, end - start,
+					 EFI_ACPI_RECLAIM_MEMORY);
+		if (ret != EFI_SUCCESS)
+			return ret;
+	}
 
-	/*
-	 * Generate ACPI tables - we know that efi_allocate_pages() returns
-	 * a 4k-aligned address, so it is safe to assume that
-	 * write_acpi_tables() will write the table at that address.
-	 */
-	addr = map_to_sysmem((void *)(ulong)acpi);
-	write_acpi_tables(addr);
+	addr = gd_acpi_start();
+	printf("EFI using ACPI tables at %lx\n", addr);
 
 	/* And expose them to our EFI payload */
 	return efi_install_configuration_table(&acpi_guid,
-					       (void *)(uintptr_t)acpi);
+					       (void *)(ulong)addr);
 }
Signature · 1 line
2.41.0.455.g037347b96a-goog
#57 lore raw

PATCH v5 45/46 x86: video: Add a driver for QEMU bochs emulation

In reply to Simon Glass

Bochs is convenient with QEMU on x86 since it does not require a video BIOS. Add a driver for it.

---

(no changes since v2)

Changes in v2:
- Bring in to qemu series
- Rebase to -next
- Drop unused of_match
- Fix Boschs typo
- Rename bochs_init_linear_fb() function to drop 'linear'
- Fix uninited variable

 drivers/video/Kconfig  |  30 ++++++++++
 drivers/video/Makefile |   1 +
 drivers/video/bochs.c  | 123 +++++++++++++++++++++++++++++++++++++++++
 drivers/video/bochs.h  |  36 ++++++++++++
 4 files changed, 190 insertions(+)
 create mode 100644 drivers/video/bochs.c
 create mode 100644 drivers/video/bochs.h
drivers/video/Kconfig +30 -0
index 49762950719e..2ba4f5eac7f3 100644
@@ -278,6 +278,36 @@ config VIDCONSOLE_AS_NAME
 	  possible to update the environment, the breakage may be confusing for
 	  users. This option will be removed around the end of 2020.
 
+config VIDEO_BOCHS
+	bool "Enable Bochs video emulation for QEMU"
+	depends on X86
+	help
+	  Enable this to use the Bochs video support provided in the QEMU
+	  emulator. This appears as a PCI device which U-Boot can set up to
+	  provide a frame buffer.
+
+if VIDEO_BOCHS
+
+config VIDEO_BOCHS_SIZE_X
+	int "Width of display (X resolution)"
+	default 1280
+	help
+	  Sets the width of the display.
+
+	  These two options control the size of the display set up by QEMU.
+	  Typical sizes are 1024 x 768 or 1280 x 1024.
+
+config VIDEO_BOCHS_SIZE_Y
+	int "High of display (Y resolution)"
+	default 1024
+	help
+	  Sets the height of the display.
+
+	  These two options control the size of the display set up by QEMU.
+	  Typical sizes are 1024 x 768 or 1280 x 1024.
+
+endif
+
 config VIDEO_COREBOOT
 	bool "Enable coreboot framebuffer driver support"
 	depends on X86
drivers/video/Makefile +1 -0
index f99d7e3c3d90..a9263709084d 100644
@@ -45,6 +45,7 @@ obj-$(CONFIG_OSD) += video_osd-uclass.o
 obj-$(CONFIG_SANDBOX_OSD) += sandbox_osd.o
 obj-$(CONFIG_VIDEO_ARM_MALIDP) += mali_dp.o
 obj-$(CONFIG_VIDEO_BCM2835) += bcm2835.o
+obj-$(CONFIG_VIDEO_BOCHS) += bochs.o
 obj-$(CONFIG_VIDEO_BROADWELL_IGD) += broadwell_igd.o
 obj-$(CONFIG_VIDEO_COREBOOT) += coreboot.o
 obj-$(CONFIG_VIDEO_DW_HDMI) += dw_hdmi.o
drivers/video/bochs.c new file +123 -0

123 lines not on this page · raw message

drivers/video/bochs.h new file +36 -0
new file mode 100644
index 000000000000..4c8ec83a550e
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Modified from coreboot bochs.c
+ */
+
+#ifndef __BOCHS_H
+#define __BOCHS_H
+
+#define VGA_INDEX	0x3c0
+
+#define IOPORT_INDEX	0x01ce
+#define IOPORT_DATA	0x01cf
+
+enum {
+	INDEX_ID,
+	INDEX_XRES,
+	INDEX_YRES,
+	INDEX_BPP,
+	INDEX_ENABLE,
+	INDEX_BANK,
+	INDEX_VIRT_WIDTH,
+	INDEX_VIRT_HEIGHT,
+	INDEX_X_OFFSET,
+	INDEX_Y_OFFSET,
+	INDEX_VIDEO_MEMORY_64K
+};
+
+#define ID0		0xb0c0
+
+#define ENABLED		BIT(0)
+#define LFB_ENABLED	BIT(6)
+#define NOCLEARMEM	BIT(7)
+
+#define MMIO_BASE	0x500
+
+#endif
Signature · 1 line
2.41.0.455.g037347b96a-goog
#58 lore raw

PATCH v5 46/46 x86: Switch QEMU over to use the bochs driver

In reply to Simon Glass

This is more convenient since it does not require a video BIOS. Enable it for QEMU.

Also drop use of video in SPL for the 64-bit QEMU, since it not needed now.

---

Changes in v5:
- Use QEMU instead of qemu
- Drop patch 'Show the number of physical address bits'

Changes in v4:
- Drop use of video in SPL

 arch/x86/cpu/qemu/Kconfig     | 2 +-
 configs/qemu-x86_64_defconfig | 4 ----
 configs/qemu-x86_defconfig    | 3 ---
 3 files changed, 1 insertion(+), 8 deletions(-)
arch/x86/cpu/qemu/Kconfig +1 -1
index f8f2f6473088..aa329b0dab29 100644
@@ -12,7 +12,7 @@ config QEMU
 	imply SYS_NS16550
 	imply USB
 	imply USB_EHCI_HCD
-	imply VIDEO_VESA
+	imply VIDEO_BOCHS
 
 if QEMU
 
configs/qemu-x86_64_defconfig +0 -4
index b1400876a2ff..4a15c516710e 100644
@@ -84,10 +84,6 @@ CONFIG_SPL_DM_RTC=y
 CONFIG_SYS_NS16550_PORT_MAPPED=y
 CONFIG_SPI=y
 CONFIG_USB_KEYBOARD=y
-CONFIG_SPL_VIDEO=y
-CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
-CONFIG_FRAMEBUFFER_VESA_MODE_USER=y
-CONFIG_FRAMEBUFFER_VESA_MODE=0x144
 CONFIG_CONSOLE_SCROLL_LINES=5
 CONFIG_FAT_BLK_XLATE=y
 # CONFIG_SPL_USE_TINY_PRINTF is not set
configs/qemu-x86_defconfig +0 -3
index 56788cd185fd..95a6ff9ae799 100644
@@ -53,9 +53,6 @@ CONFIG_NVME_PCI=y
 CONFIG_SYS_NS16550_PORT_MAPPED=y
 CONFIG_SPI=y
 CONFIG_USB_KEYBOARD=y
-CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
-CONFIG_FRAMEBUFFER_VESA_MODE_USER=y
-CONFIG_FRAMEBUFFER_VESA_MODE=0x144
 CONFIG_CONSOLE_SCROLL_LINES=5
 CONFIG_GENERATE_ACPI_TABLE=y
 # CONFIG_GZIP is not set
Signature · 1 line
2.41.0.455.g037347b96a-goog
#59 lore raw
In reply to Simon Glass

Hi Simon,

Quoted 39 lines · Simon Glass

This series adds various minor features so that qemu-x86_64 can boot the Ubuntu 2022.04 installer using a virtio device:

qemu-system-x86_64 -M pc -drive format=raw,file=root.img
-bios /tmp/b/qemu-x86_64/u-boot.rom
-drive if=virtio,file=ubuntu-22.04.2-desktop-amd64.iso -smp 4 -m 4G -serial mon:stdio

The main changes include:
- Enable video in SPL while running in 32-bit mode
- Drop the duplicate ACPI tables with EFI
- Support PCI autoconfig in SPL
- Support FAT on a CDROM filesystem
- Improved bootstd rules around device tree and efi_set_bootdev()

There are also quite a number of minor tweaks and fixes to make things easier to use.

This series is based on an older version of the SPL-video series from Nikhil M Jain. It is available at u-boot-dm/bryc-working

Changes in v5:
- Make mtrr_type_name[] static
- Fix 'abrievated' typo
- Drop extra space in penultimate example
- Drop unnecessary 'it' in commit message
- Adjust the prompt for clarity (although it is now >12 chars)
- Reword commit message
- Drop unnecessary 'allow' word
- Add tests for bdinfo additions
- Drop extra 'qfw list' line
- Update commit message to explain 'md' reference
- Drop period at end of commit subject
- Drop extra 'a' in commit message
- Add 'bdinfo' tag to commit subject
- Use the existing QEMU code instead
- Use u16 instead of ushort
- Split out banner code into a separate patch

Quoted 9 lines

- Drop code to ensure the SPL banner is only shown once
- Fix 'litlle' typo in subject
- Correct indentation
- Add a comment about QFW putting its tables up high
- Add a comment that the bloblist is always in high memory
- Use "gpio" for log return
- Use QEMU instead of qemu
- Drop patch 'Show the number of physical address bits'

Except the following patches:

[v5,02/46] x86: Return mtrr_add_request() to its old purpose [v5,23/46] pci: Allow the video BIOS to work in SPL with QEMU [v5,34/46] fs: fat: Support reading from a larger block size

series applied to u-boot-x86, thanks!

I will take a look at the MTRR one.

Regards,
Bin