Skip to contentSkip to conversation

video: hx8394: Add panel driver for hannstar,hsd060bhw4

PATCH In review Ondřej Jirman 2 participants 2 messages May 25, 2023 – Jul 17, 2023 Framebuffer layer

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 video: hx8394: Add panel driver for hannstar,hsd060bhw4

From: Ondrej Jirman <[email protected]>

The driver is for panels based on the Himax HX8394 controller, such as the HannStar HSD060BHW4 720x1440 TFT LCD panel that uses a MIPI-DSI interface. This panel is used in Pinephone Pro.

Cc Anatolij Gustschin <[email protected]>
---
 drivers/video/Kconfig        |   8 ++
 drivers/video/Makefile       |   1 +
 drivers/video/himax-hx8394.c | 237 +++++++++++++++++++++++++++++++++++
 3 files changed, 246 insertions(+)
 create mode 100644 drivers/video/himax-hx8394.c
drivers/video/Kconfig +8 -0
index 1e2f4e6de4a5..9efe69361ca6 100644
@@ -477,6 +477,14 @@ config VIDEO_LCD_ENDEAVORU
 	  using the same DSI command sequence. The panel has a 720x1280
 	  resolution and uses 24 bit RGB per pixel.
 
+config VIDEO_LCD_HIMAX_HX8394
+	bool "Himax HX8394 DSI LCD panel support"
+	depends on PANEL && BACKLIGHT
+	select VIDEO_MIPI_DSI
+	help
+	Say Y here if you want to enable support for Himax HX8394
+	dsi 4dl panel.
+
 config VIDEO_LCD_ORISETECH_OTM8009A
 	bool "OTM8009A DSI LCD panel support"
 	select VIDEO_MIPI_DSI
drivers/video/Makefile +1 -0
index 9a53cd141875..5dcc3fea08cb 100644
@@ -54,6 +54,7 @@ obj-$(CONFIG_VIDEO_IPUV3) += imx/
 obj-$(CONFIG_VIDEO_IVYBRIDGE_IGD) += ivybridge_igd.o
 obj-$(CONFIG_VIDEO_LCD_ANX9804) += anx9804.o
 obj-$(CONFIG_VIDEO_LCD_ENDEAVORU) += endeavoru-panel.o
+obj-$(CONFIG_VIDEO_LCD_HIMAX_HX8394) += himax-hx8394.o
 obj-$(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM) += hitachi_tx18d42vm_lcd.o
 obj-$(CONFIG_VIDEO_LCD_ORISETECH_OTM8009A) += orisetech_otm8009a.o
 obj-$(CONFIG_VIDEO_LCD_RAYDIUM_RM68200) += raydium-rm68200.o
drivers/video/himax-hx8394.c new file +237 -0

237 lines not on this page · raw message

Signature · 1 line
2.40.1
#1 lore raw
Quoted 6 lines · On Thu, 25 May 2023 14:34:35 +0200 Ondřej Jirman [email protected] wrote:

From: Ondrej Jirman <[email protected]>

The driver is for panels based on the Himax HX8394 controller, such as the HannStar HSD060BHW4 720x1440 TFT LCD panel that uses a MIPI-DSI interface. This panel is used in Pinephone Pro.

Quoted 8 lines
Cc Anatolij Gustschin <[email protected]>
---
 drivers/video/Kconfig        |   8 ++
 drivers/video/Makefile       |   1 +
 drivers/video/himax-hx8394.c | 237 +++++++++++++++++++++++++++++++++++
 3 files changed, 246 insertions(+)
 create mode 100644 drivers/video/himax-hx8394.c

applied to u-boot-video/master, thanks!

--
Anatolij