Skip to contentSkip to conversation

arm64: dts: imx8mm-evk: Add camera support

PATCH Applied Fabio Estevam 2 participants 2 messages Jul 14, 2023 – Jul 19, 2023

Subsystems (2)
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/1 arm64: dts: imx8mm-evk: Add camera support

From: Fabio Estevam <[email protected]>

Add support for the OV5640 camera.

Tested with the following commands:

media-ctl -l "'ov5640 2-003c':0 -> 'csis-32e30000.mipi-csi':0 [1]" media-ctl -V "'ov5640 2-003c':0 [fmt:UYVY8_1X16/640x480 field:none]" media-ctl -V "'csis-32e30000.mipi-csi':0 [fmt:UYVY8_1X16/640x480 field:none]" media-ctl -V "'csi':0 [fmt:UYVY8_1X16/640x480 field:none]"; v4l2-ctl --stream-mmap -d /dev/video0

---
 arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +48 -0
index df8e808ac473..e31ab8b4f54f 100644
@@ -380,6 +380,11 @@ typec1_con: connector {
 	};
 };
 
+
+&csi {
+	status = "okay";
+};
+
 &i2c3 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -393,12 +398,47 @@ pca6416: gpio@20 {
 		#gpio-cells = <2>;
 		vcc-supply = <&buck4_reg>;
 	};
+
+	camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_camera>;
+		clocks = <&clk IMX8MM_CLK_CLKO1>;
+		clock-names = "xclk";
+		assigned-clocks = <&clk IMX8MM_CLK_CLKO1>;
+		assigned-clock-parents = <&clk IMX8MM_CLK_24M>;
+		assigned-clock-rates = <24000000>;
+		powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&imx8mm_mipi_csi_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
 };
 
 &lcdif {
 	status = "okay";
 };
 
+&mipi_csi {
+	status = "okay";
+
+	ports {
+		port@0 {
+			imx8mm_mipi_csi_in: endpoint {
+				remote-endpoint = <&ov5640_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
 &mipi_dsi {
 	samsung,esc-clock-frequency = <10000000>;
 	status = "okay";
@@ -684,4 +724,12 @@ pinctrl_backlight: backlightgrp {
 			MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT	0x06
 		>;
 	};
+
+	pinctrl_camera: cameragrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x59
+		>;
+	};
 };
Signature · 7 lines
2.34.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Applied
#1 lore raw
Quoted 6 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

Add support for the OV5640 camera.

Tested with the following commands:

Quoted 7 lines

media-ctl -l "'ov5640 2-003c':0 -> 'csis-32e30000.mipi-csi':0 [1]" media-ctl -V "'ov5640 2-003c':0 [fmt:UYVY8_1X16/640x480 field:none]" media-ctl -V "'csis-32e30000.mipi-csi':0 [fmt:UYVY8_1X16/640x480 field:none]" media-ctl -V "'csi':0 [fmt:UYVY8_1X16/640x480 field:none]"; v4l2-ctl --stream-mmap -d /dev/video0

Applied, thanks!

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel