Skip to contentSkip to conversation

clk: mediatek: Check if clock ID is larger than clk_hw_onecell_data size

PATCH In review Chen-Yu Tsai 2 participants 4 messages Jul 19, 2023

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 clk: mediatek: Check if clock ID is larger than clk_hw_onecell_data size

The MediaTek clock driver library's simple-probe mechanism allocates clk_hw_onecell_data based on how many clocks are defined. If there's a mismatch between that and the actual number of clocks defined in the DT binding, such that a clock ID exceeds the number, then an out-of-bounds write will occur. This silently corrupts memory, maybe causing a crash later on that seems unrelated. KASAN can detect this if turned on.

To avoid getting into said scenario, check if the to be registered clock's ID will fit in the allocated clk_hw_onecell_data. If not, put out a big warning and skip the clock.

One could argue that the proper fix is to let the drivers specify the number of clocks (based on a DT binding macro) instead. However even the DT binding macro could be wrong. And having code to catch errors and give out warnings is better than having silent corruption.

---
This one is less urgent.

Angelo, do you think we should add a field to struct mtk_clk_desc and assign CLK_XXX_NR_CLK to it?

 drivers/clk/mediatek/clk-gate.c | 11 +++++++++
 drivers/clk/mediatek/clk-mtk.c  | 43 +++++++++++++++++++++++++++++++++
 2 files changed, 54 insertions(+)
drivers/clk/mediatek/clk-gate.c +11 -0
index 67d9e741c5e7..bb7c536ef60f 100644
@@ -222,6 +222,11 @@ int mtk_clk_register_gates(struct device *dev, struct device_node *node,
 	for (i = 0; i < num; i++) {
 		const struct mtk_gate *gate = &clks[i];
 
+		if (WARN(gate->id >= clk_data->num,
+			 "%pOF: gateclock ID (%d)larger than expected (%d)\n",
+			 node, gate->id, clk_data->num))
+			continue;
+
 		if (!IS_ERR_OR_NULL(clk_data->hws[gate->id])) {
 			pr_warn("%pOF: Trying to register duplicate clock ID: %d\n",
 				node, gate->id);
@@ -251,6 +256,9 @@ int mtk_clk_register_gates(struct device *dev, struct device_node *node,
 	while (--i >= 0) {
 		const struct mtk_gate *gate = &clks[i];
 
+		if (gate->id >= clk_data->num)
+			continue;
+
 		if (IS_ERR_OR_NULL(clk_data->hws[gate->id]))
 			continue;
 
@@ -273,6 +281,9 @@ void mtk_clk_unregister_gates(const struct mtk_gate *clks, int num,
 	for (i = num; i > 0; i--) {
 		const struct mtk_gate *gate = &clks[i - 1];
 
+		if (gate->id >= clk_data->num)
+			continue;
+
 		if (IS_ERR_OR_NULL(clk_data->hws[gate->id]))
 			continue;
 
drivers/clk/mediatek/clk-mtk.c +43 -0

115 lines not on this page · raw message

Signature · 1 line
2.41.0.455.g037347b96a-goog
#1 lore raw

Il 19/07/23 10:20, Chen-Yu Tsai ha scritto:

Quoted 16 lines

The MediaTek clock driver library's simple-probe mechanism allocates clk_hw_onecell_data based on how many clocks are defined. If there's a mismatch between that and the actual number of clocks defined in the DT binding, such that a clock ID exceeds the number, then an out-of-bounds write will occur. This silently corrupts memory, maybe causing a crash later on that seems unrelated. KASAN can detect this if turned on.

To avoid getting into said scenario, check if the to be registered clock's ID will fit in the allocated clk_hw_onecell_data. If not, put out a big warning and skip the clock.

One could argue that the proper fix is to let the drivers specify the number of clocks (based on a DT binding macro) instead. However even the DT binding macro could be wrong. And having code to catch errors and give out warnings is better than having silent corruption.

Quoted 7 lines

---
This one is less urgent.

Angelo, do you think we should add a field to struct mtk_clk_desc and assign CLK_XXX_NR_CLK to it?

I get the point... but I don't know if it is a good idea to add checks for *bad code* in the first place, as bad code shall not happen at all. Validating whether a developer wrote the right thing is something that should be done in code reviews, and such mistakes shouldn't be allowed to happen.

Besides, if you really want to go this route... In that case I disagree about the continue, as I would be inflexible: if your code is bad, I will refuse to register your clocks entirely.
That'll force the developer to actually fix it, as parts of the SoC and/or platform will *not work at all* :-)

So, in that case...

	if (rc->id >= clk_data->num) {
		hw = PTR_ERR(-EINVAL);
		goto err;
	}

Thoughts?

Cheers!
Angelo

Quoted 171 lines
  drivers/clk/mediatek/clk-gate.c | 11 +++++++++
  drivers/clk/mediatek/clk-mtk.c  | 43 +++++++++++++++++++++++++++++++++
  2 files changed, 54 insertions(+)
drivers/clk/mediatek/clk-gate.c +11 -0
index 67d9e741c5e7..bb7c536ef60f 100644
@@ -222,6 +222,11 @@ int mtk_clk_register_gates(struct device *dev, struct device_node *node,
  	for (i = 0; i < num; i++) {
  		const struct mtk_gate *gate = &clks[i];
 
+		if (WARN(gate->id >= clk_data->num,
+			 "%pOF: gateclock ID (%d)larger than expected (%d)\n",
+			 node, gate->id, clk_data->num))
+			continue;
+
  		if (!IS_ERR_OR_NULL(clk_data->hws[gate->id])) {
  			pr_warn("%pOF: Trying to register duplicate clock ID: %d\n",
  				node, gate->id);
@@ -251,6 +256,9 @@ int mtk_clk_register_gates(struct device *dev, struct device_node *node,
  	while (--i >= 0) {
  		const struct mtk_gate *gate = &clks[i];
 
+		if (gate->id >= clk_data->num)
+			continue;
+
  		if (IS_ERR_OR_NULL(clk_data->hws[gate->id]))
  			continue;
 
@@ -273,6 +281,9 @@ void mtk_clk_unregister_gates(const struct mtk_gate *clks, int num,
  	for (i = num; i > 0; i--) {
  		const struct mtk_gate *gate = &clks[i - 1];
 
+		if (gate->id >= clk_data->num)
+			continue;
+
  		if (IS_ERR_OR_NULL(clk_data->hws[gate->id]))
  			continue;
 
drivers/clk/mediatek/clk-mtk.c +43 -0
index 2e55368dc4d8..09d50a15db77 100644
@@ -94,6 +94,10 @@ int mtk_clk_register_fixed_clks(const struct mtk_fixed_clk *clks, int num,
  	for (i = 0; i < num; i++) {
  		const struct mtk_fixed_clk *rc = &clks[i];
 
+		if (WARN(rc->id >= clk_data->num,
+			 "Fixed clock ID (%d) larger than expected (%d)\n", rc->id, clk_data->num))
+			continue;
+
  		if (!IS_ERR_OR_NULL(clk_data->hws[rc->id])) {
  			pr_warn("Trying to register duplicate clock ID: %d\n", rc->id);
  			continue;
@@ -117,6 +121,9 @@ int mtk_clk_register_fixed_clks(const struct mtk_fixed_clk *clks, int num,
  	while (--i >= 0) {
  		const struct mtk_fixed_clk *rc = &clks[i];
 
+		if (rc->id >= clk_data->num)
+			continue;
+
  		if (IS_ERR_OR_NULL(clk_data->hws[rc->id]))
  			continue;
 
@@ -139,6 +146,9 @@ void mtk_clk_unregister_fixed_clks(const struct mtk_fixed_clk *clks, int num,
  	for (i = num; i > 0; i--) {
  		const struct mtk_fixed_clk *rc = &clks[i - 1];
 
+		if (rc->id >= clk_data->num)
+			continue;
+
  		if (IS_ERR_OR_NULL(clk_data->hws[rc->id]))
  			continue;
 
@@ -160,6 +170,11 @@ int mtk_clk_register_factors(const struct mtk_fixed_factor *clks, int num,
  	for (i = 0; i < num; i++) {
  		const struct mtk_fixed_factor *ff = &clks[i];
 
+		if (WARN(ff->id >= clk_data->num,
+			 "Fixed factor clock ID (%d) larger than expected (%d)\n",
+			 ff->id, clk_data->num))
+			continue;
+
  		if (!IS_ERR_OR_NULL(clk_data->hws[ff->id])) {
  			pr_warn("Trying to register duplicate clock ID: %d\n", ff->id);
  			continue;
@@ -183,6 +198,9 @@ int mtk_clk_register_factors(const struct mtk_fixed_factor *clks, int num,
  	while (--i >= 0) {
  		const struct mtk_fixed_factor *ff = &clks[i];
 
+		if (ff->id >= clk_data->num)
+			continue;
+
  		if (IS_ERR_OR_NULL(clk_data->hws[ff->id]))
  			continue;
 
@@ -205,6 +223,9 @@ void mtk_clk_unregister_factors(const struct mtk_fixed_factor *clks, int num,
  	for (i = num; i > 0; i--) {
  		const struct mtk_fixed_factor *ff = &clks[i - 1];
 
+		if (ff->id >= clk_data->num)
+			continue;
+
  		if (IS_ERR_OR_NULL(clk_data->hws[ff->id]))
  			continue;
 
@@ -339,6 +360,11 @@ int mtk_clk_register_composites(struct device *dev,
  	for (i = 0; i < num; i++) {
  		const struct mtk_composite *mc = &mcs[i];
 
+		if (WARN(mc->id >= clk_data->num,
+			 "Composite clock ID (%d) larger than expected (%d)\n",
+			 mc->id, clk_data->num))
+			continue;
+
  		if (!IS_ERR_OR_NULL(clk_data->hws[mc->id])) {
  			pr_warn("Trying to register duplicate clock ID: %d\n",
  				mc->id);
@@ -362,6 +388,9 @@ int mtk_clk_register_composites(struct device *dev,
  	while (--i >= 0) {
  		const struct mtk_composite *mc = &mcs[i];
 
+		if (mc->id >= clk_data->num)
+			continue;
+
  		if (IS_ERR_OR_NULL(clk_data->hws[mcs->id]))
  			continue;
 
@@ -384,6 +413,9 @@ void mtk_clk_unregister_composites(const struct mtk_composite *mcs, int num,
  	for (i = num; i > 0; i--) {
  		const struct mtk_composite *mc = &mcs[i - 1];
 
+		if (mc->id >= clk_data->num)
+			continue;
+
  		if (IS_ERR_OR_NULL(clk_data->hws[mc->id]))
  			continue;
 
@@ -407,6 +439,11 @@ int mtk_clk_register_dividers(struct device *dev,
  	for (i = 0; i <  num; i++) {
  		const struct mtk_clk_divider *mcd = &mcds[i];
 
+		if (WARN(mcd->id >= clk_data->num,
+			 "Divider clock ID (%d) larger than expected (%d)\n",
+			 mcd->id, clk_data->num))
+			continue;
+
  		if (!IS_ERR_OR_NULL(clk_data->hws[mcd->id])) {
  			pr_warn("Trying to register duplicate clock ID: %d\n",
  				mcd->id);
@@ -432,6 +469,9 @@ int mtk_clk_register_dividers(struct device *dev,
  	while (--i >= 0) {
  		const struct mtk_clk_divider *mcd = &mcds[i];
 
+		if (mcd->id >= clk_data->num)
+			continue;
+
  		if (IS_ERR_OR_NULL(clk_data->hws[mcd->id]))
  			continue;
 
@@ -454,6 +494,9 @@ void mtk_clk_unregister_dividers(const struct mtk_clk_divider *mcds, int num,
  	for (i = num; i > 0; i--) {
  		const struct mtk_clk_divider *mcd = &mcds[i - 1];
 
+		if (mcd->id >= clk_data->num)
+			continue;
+
  		if (IS_ERR_OR_NULL(clk_data->hws[mcd->id]))
  			continue;
 
#2 lore raw
Quoted 22 lines · AngeloGioacchino Del Regno

Il 19/07/23 10:20, Chen-Yu Tsai ha scritto:

Quoted 20 lines

The MediaTek clock driver library's simple-probe mechanism allocates clk_hw_onecell_data based on how many clocks are defined. If there's a mismatch between that and the actual number of clocks defined in the DT binding, such that a clock ID exceeds the number, then an out-of-bounds write will occur. This silently corrupts memory, maybe causing a crash later on that seems unrelated. KASAN can detect this if turned on.

To avoid getting into said scenario, check if the to be registered clock's ID will fit in the allocated clk_hw_onecell_data. If not, put out a big warning and skip the clock.

One could argue that the proper fix is to let the drivers specify the number of clocks (based on a DT binding macro) instead. However even the DT binding macro could be wrong. And having code to catch errors and give out warnings is better than having silent corruption.

---
This one is less urgent.

Quoted 8 lines
Quoted 3 lines

Angelo, do you think we should add a field to struct mtk_clk_desc and assign CLK_XXX_NR_CLK to it?

I get the point... but I don't know if it is a good idea to add checks for *bad code* in the first place, as bad code shall not happen at all. Validating whether a developer wrote the right thing is something that should be done in code reviews, and such mistakes shouldn't be allowed to happen.

In theory, yeah. In practice, well, we already have such an error in tree. :p

Quoted 6 lines

Besides, if you really want to go this route... In that case I disagree about the continue, as I would be inflexible: if your code is bad, I will refuse to register your clocks entirely.
That'll force the developer to actually fix it, as parts of the SoC and/or platform will *not work at all* :-)

Quoted 8 lines

So, in that case...

        if (rc->id >= clk_data->num) {
                hw = PTR_ERR(-EINVAL);
                goto err;
        }

Thoughts?

That works for me as well. This was more my debug code cleaned up. I assume we still want the warning / error message though?

The other choice would be adding .num_clks for CLK_XXX_NR_CLKS to mtk_clk_desc. What are your thoughts on that?

ChenYu

Quoted 175 lines

Cheers!
Angelo

Quoted 171 lines
  drivers/clk/mediatek/clk-gate.c | 11 +++++++++
  drivers/clk/mediatek/clk-mtk.c  | 43 +++++++++++++++++++++++++++++++++
  2 files changed, 54 insertions(+)
drivers/clk/mediatek/clk-gate.c +11 -0
index 67d9e741c5e7..bb7c536ef60f 100644
@@ -222,6 +222,11 @@ int mtk_clk_register_gates(struct device *dev, struct device_node *node,
      for (i = 0; i < num; i++) {
              const struct mtk_gate *gate = &clks[i];
 
+             if (WARN(gate->id >= clk_data->num,
+                      "%pOF: gateclock ID (%d)larger than expected (%d)\n",
+                      node, gate->id, clk_data->num))
+                     continue;
+
              if (!IS_ERR_OR_NULL(clk_data->hws[gate->id])) {
                      pr_warn("%pOF: Trying to register duplicate clock ID: %d\n",
                              node, gate->id);
@@ -251,6 +256,9 @@ int mtk_clk_register_gates(struct device *dev, struct device_node *node,
      while (--i >= 0) {
              const struct mtk_gate *gate = &clks[i];
 
+             if (gate->id >= clk_data->num)
+                     continue;
+
              if (IS_ERR_OR_NULL(clk_data->hws[gate->id]))
                      continue;
 
@@ -273,6 +281,9 @@ void mtk_clk_unregister_gates(const struct mtk_gate *clks, int num,
      for (i = num; i > 0; i--) {
              const struct mtk_gate *gate = &clks[i - 1];
 
+             if (gate->id >= clk_data->num)
+                     continue;
+
              if (IS_ERR_OR_NULL(clk_data->hws[gate->id]))
                      continue;
 
drivers/clk/mediatek/clk-mtk.c +43 -0
index 2e55368dc4d8..09d50a15db77 100644
@@ -94,6 +94,10 @@ int mtk_clk_register_fixed_clks(const struct mtk_fixed_clk *clks, int num,
      for (i = 0; i < num; i++) {
              const struct mtk_fixed_clk *rc = &clks[i];
 
+             if (WARN(rc->id >= clk_data->num,
+                      "Fixed clock ID (%d) larger than expected (%d)\n", rc->id, clk_data->num))
+                     continue;
+
              if (!IS_ERR_OR_NULL(clk_data->hws[rc->id])) {
                      pr_warn("Trying to register duplicate clock ID: %d\n", rc->id);
                      continue;
@@ -117,6 +121,9 @@ int mtk_clk_register_fixed_clks(const struct mtk_fixed_clk *clks, int num,
      while (--i >= 0) {
              const struct mtk_fixed_clk *rc = &clks[i];
 
+             if (rc->id >= clk_data->num)
+                     continue;
+
              if (IS_ERR_OR_NULL(clk_data->hws[rc->id]))
                      continue;
 
@@ -139,6 +146,9 @@ void mtk_clk_unregister_fixed_clks(const struct mtk_fixed_clk *clks, int num,
      for (i = num; i > 0; i--) {
              const struct mtk_fixed_clk *rc = &clks[i - 1];
 
+             if (rc->id >= clk_data->num)
+                     continue;
+
              if (IS_ERR_OR_NULL(clk_data->hws[rc->id]))
                      continue;
 
@@ -160,6 +170,11 @@ int mtk_clk_register_factors(const struct mtk_fixed_factor *clks, int num,
      for (i = 0; i < num; i++) {
              const struct mtk_fixed_factor *ff = &clks[i];
 
+             if (WARN(ff->id >= clk_data->num,
+                      "Fixed factor clock ID (%d) larger than expected (%d)\n",
+                      ff->id, clk_data->num))
+                     continue;
+
              if (!IS_ERR_OR_NULL(clk_data->hws[ff->id])) {
                      pr_warn("Trying to register duplicate clock ID: %d\n", ff->id);
                      continue;
@@ -183,6 +198,9 @@ int mtk_clk_register_factors(const struct mtk_fixed_factor *clks, int num,
      while (--i >= 0) {
              const struct mtk_fixed_factor *ff = &clks[i];
 
+             if (ff->id >= clk_data->num)
+                     continue;
+
              if (IS_ERR_OR_NULL(clk_data->hws[ff->id]))
                      continue;
 
@@ -205,6 +223,9 @@ void mtk_clk_unregister_factors(const struct mtk_fixed_factor *clks, int num,
      for (i = num; i > 0; i--) {
              const struct mtk_fixed_factor *ff = &clks[i - 1];
 
+             if (ff->id >= clk_data->num)
+                     continue;
+
              if (IS_ERR_OR_NULL(clk_data->hws[ff->id]))
                      continue;
 
@@ -339,6 +360,11 @@ int mtk_clk_register_composites(struct device *dev,
      for (i = 0; i < num; i++) {
              const struct mtk_composite *mc = &mcs[i];
 
+             if (WARN(mc->id >= clk_data->num,
+                      "Composite clock ID (%d) larger than expected (%d)\n",
+                      mc->id, clk_data->num))
+                     continue;
+
              if (!IS_ERR_OR_NULL(clk_data->hws[mc->id])) {
                      pr_warn("Trying to register duplicate clock ID: %d\n",
                              mc->id);
@@ -362,6 +388,9 @@ int mtk_clk_register_composites(struct device *dev,
      while (--i >= 0) {
              const struct mtk_composite *mc = &mcs[i];
 
+             if (mc->id >= clk_data->num)
+                     continue;
+
              if (IS_ERR_OR_NULL(clk_data->hws[mcs->id]))
                      continue;
 
@@ -384,6 +413,9 @@ void mtk_clk_unregister_composites(const struct mtk_composite *mcs, int num,
      for (i = num; i > 0; i--) {
              const struct mtk_composite *mc = &mcs[i - 1];
 
+             if (mc->id >= clk_data->num)
+                     continue;
+
              if (IS_ERR_OR_NULL(clk_data->hws[mc->id]))
                      continue;
 
@@ -407,6 +439,11 @@ int mtk_clk_register_dividers(struct device *dev,
      for (i = 0; i <  num; i++) {
              const struct mtk_clk_divider *mcd = &mcds[i];
 
+             if (WARN(mcd->id >= clk_data->num,
+                      "Divider clock ID (%d) larger than expected (%d)\n",
+                      mcd->id, clk_data->num))
+                     continue;
+
              if (!IS_ERR_OR_NULL(clk_data->hws[mcd->id])) {
                      pr_warn("Trying to register duplicate clock ID: %d\n",
                              mcd->id);
@@ -432,6 +469,9 @@ int mtk_clk_register_dividers(struct device *dev,
      while (--i >= 0) {
              const struct mtk_clk_divider *mcd = &mcds[i];
 
+             if (mcd->id >= clk_data->num)
+                     continue;
+
              if (IS_ERR_OR_NULL(clk_data->hws[mcd->id]))
                      continue;
 
@@ -454,6 +494,9 @@ void mtk_clk_unregister_dividers(const struct mtk_clk_divider *mcds, int num,
      for (i = num; i > 0; i--) {
              const struct mtk_clk_divider *mcd = &mcds[i - 1];
 
+             if (mcd->id >= clk_data->num)
+                     continue;
+
              if (IS_ERR_OR_NULL(clk_data->hws[mcd->id]))
                      continue;
 
#3 lore raw

Il 19/07/23 10:52, Chen-Yu Tsai ha scritto:

Quoted 28 lines
Quoted 26 lines · AngeloGioacchino Del Regno

Il 19/07/23 10:20, Chen-Yu Tsai ha scritto:

Quoted 23 lines

The MediaTek clock driver library's simple-probe mechanism allocates clk_hw_onecell_data based on how many clocks are defined. If there's a mismatch between that and the actual number of clocks defined in the DT binding, such that a clock ID exceeds the number, then an out-of-bounds write will occur. This silently corrupts memory, maybe causing a crash later on that seems unrelated. KASAN can detect this if turned on.

To avoid getting into said scenario, check if the to be registered clock's ID will fit in the allocated clk_hw_onecell_data. If not, put out a big warning and skip the clock.

One could argue that the proper fix is to let the drivers specify the number of clocks (based on a DT binding macro) instead. However even the DT binding macro could be wrong. And having code to catch errors and give out warnings is better than having silent corruption.

---
This one is less urgent.

Angelo, do you think we should add a field to struct mtk_clk_desc and assign CLK_XXX_NR_CLK to it?

Quoted 7 lines
Quoted 4 lines

I get the point... but I don't know if it is a good idea to add checks for *bad code* in the first place, as bad code shall not happen at all. Validating whether a developer wrote the right thing is something that should be done in code reviews, and such mistakes shouldn't be allowed to happen.

In theory, yeah. In practice, well, we already have such an error in tree. :p

Yeah, I realize that reviews are done by humans, and humans naturally make mistakes, which is fine.

I wonder if there is any way to solve this with a build time error... I didn't try and didn't look though - so I'm just thinking out loud.

Quoted 13 lines
Quoted 13 lines

Besides, if you really want to go this route... In that case I disagree about the continue, as I would be inflexible: if your code is bad, I will refuse to register your clocks entirely.
That'll force the developer to actually fix it, as parts of the SoC and/or platform will *not work at all* :-)

So, in that case...

         if (rc->id >= clk_data->num) {
                 hw = PTR_ERR(-EINVAL);
                 goto err;
         }
Quoted 5 lines
Quoted 1 line

Thoughts?

That works for me as well. This was more my debug code cleaned up. I assume we still want the warning / error message though?

I don't have any strong opinions on this specific matter. My only concern is that we'd increase the kernel size with those prints that should never happen anyway...

...but again, I'll leave that choice to you - no strong opinions.

Quoted 3 lines

The other choice would be adding .num_clks for CLK_XXX_NR_CLKS to mtk_clk_desc. What are your thoughts on that?

A u16 wouldn't waste all that much memory, so that could cover the case in which someone specifies *less* clocks than normal.
That'd be something necessary if we're really following that validation route, as the actual validation would be *incomplete* without that, I think.

Quoted 177 lines

ChenYu

Quoted 175 lines

Cheers!
Angelo

Quoted 171 lines
   drivers/clk/mediatek/clk-gate.c | 11 +++++++++
   drivers/clk/mediatek/clk-mtk.c  | 43 +++++++++++++++++++++++++++++++++
   2 files changed, 54 insertions(+)
drivers/clk/mediatek/clk-gate.c +11 -0
index 67d9e741c5e7..bb7c536ef60f 100644
@@ -222,6 +222,11 @@ int mtk_clk_register_gates(struct device *dev, struct device_node *node,
       for (i = 0; i < num; i++) {
               const struct mtk_gate *gate = &clks[i];
 
+             if (WARN(gate->id >= clk_data->num,
+                      "%pOF: gateclock ID (%d)larger than expected (%d)\n",
+                      node, gate->id, clk_data->num))
+                     continue;
+
               if (!IS_ERR_OR_NULL(clk_data->hws[gate->id])) {
                       pr_warn("%pOF: Trying to register duplicate clock ID: %d\n",
                               node, gate->id);
@@ -251,6 +256,9 @@ int mtk_clk_register_gates(struct device *dev, struct device_node *node,
       while (--i >= 0) {
               const struct mtk_gate *gate = &clks[i];
 
+             if (gate->id >= clk_data->num)
+                     continue;
+
               if (IS_ERR_OR_NULL(clk_data->hws[gate->id]))
                       continue;
 
@@ -273,6 +281,9 @@ void mtk_clk_unregister_gates(const struct mtk_gate *clks, int num,
       for (i = num; i > 0; i--) {
               const struct mtk_gate *gate = &clks[i - 1];
 
+             if (gate->id >= clk_data->num)
+                     continue;
+
               if (IS_ERR_OR_NULL(clk_data->hws[gate->id]))
                       continue;
 
drivers/clk/mediatek/clk-mtk.c +43 -0
index 2e55368dc4d8..09d50a15db77 100644
@@ -94,6 +94,10 @@ int mtk_clk_register_fixed_clks(const struct mtk_fixed_clk *clks, int num,
       for (i = 0; i < num; i++) {
               const struct mtk_fixed_clk *rc = &clks[i];
 
+             if (WARN(rc->id >= clk_data->num,
+                      "Fixed clock ID (%d) larger than expected (%d)\n", rc->id, clk_data->num))
+                     continue;
+
               if (!IS_ERR_OR_NULL(clk_data->hws[rc->id])) {
                       pr_warn("Trying to register duplicate clock ID: %d\n", rc->id);
                       continue;
@@ -117,6 +121,9 @@ int mtk_clk_register_fixed_clks(const struct mtk_fixed_clk *clks, int num,
       while (--i >= 0) {
               const struct mtk_fixed_clk *rc = &clks[i];
 
+             if (rc->id >= clk_data->num)
+                     continue;
+
               if (IS_ERR_OR_NULL(clk_data->hws[rc->id]))
                       continue;
 
@@ -139,6 +146,9 @@ void mtk_clk_unregister_fixed_clks(const struct mtk_fixed_clk *clks, int num,
       for (i = num; i > 0; i--) {
               const struct mtk_fixed_clk *rc = &clks[i - 1];
 
+             if (rc->id >= clk_data->num)
+                     continue;
+
               if (IS_ERR_OR_NULL(clk_data->hws[rc->id]))
                       continue;
 
@@ -160,6 +170,11 @@ int mtk_clk_register_factors(const struct mtk_fixed_factor *clks, int num,
       for (i = 0; i < num; i++) {
               const struct mtk_fixed_factor *ff = &clks[i];
 
+             if (WARN(ff->id >= clk_data->num,
+                      "Fixed factor clock ID (%d) larger than expected (%d)\n",
+                      ff->id, clk_data->num))
+                     continue;
+
               if (!IS_ERR_OR_NULL(clk_data->hws[ff->id])) {
                       pr_warn("Trying to register duplicate clock ID: %d\n", ff->id);
                       continue;
@@ -183,6 +198,9 @@ int mtk_clk_register_factors(const struct mtk_fixed_factor *clks, int num,
       while (--i >= 0) {
               const struct mtk_fixed_factor *ff = &clks[i];
 
+             if (ff->id >= clk_data->num)
+                     continue;
+
               if (IS_ERR_OR_NULL(clk_data->hws[ff->id]))
                       continue;
 
@@ -205,6 +223,9 @@ void mtk_clk_unregister_factors(const struct mtk_fixed_factor *clks, int num,
       for (i = num; i > 0; i--) {
               const struct mtk_fixed_factor *ff = &clks[i - 1];
 
+             if (ff->id >= clk_data->num)
+                     continue;
+
               if (IS_ERR_OR_NULL(clk_data->hws[ff->id]))
                       continue;
 
@@ -339,6 +360,11 @@ int mtk_clk_register_composites(struct device *dev,
       for (i = 0; i < num; i++) {
               const struct mtk_composite *mc = &mcs[i];
 
+             if (WARN(mc->id >= clk_data->num,
+                      "Composite clock ID (%d) larger than expected (%d)\n",
+                      mc->id, clk_data->num))
+                     continue;
+
               if (!IS_ERR_OR_NULL(clk_data->hws[mc->id])) {
                       pr_warn("Trying to register duplicate clock ID: %d\n",
                               mc->id);
@@ -362,6 +388,9 @@ int mtk_clk_register_composites(struct device *dev,
       while (--i >= 0) {
               const struct mtk_composite *mc = &mcs[i];
 
+             if (mc->id >= clk_data->num)
+                     continue;
+
               if (IS_ERR_OR_NULL(clk_data->hws[mcs->id]))
                       continue;
 
@@ -384,6 +413,9 @@ void mtk_clk_unregister_composites(const struct mtk_composite *mcs, int num,
       for (i = num; i > 0; i--) {
               const struct mtk_composite *mc = &mcs[i - 1];
 
+             if (mc->id >= clk_data->num)
+                     continue;
+
               if (IS_ERR_OR_NULL(clk_data->hws[mc->id]))
                       continue;
 
@@ -407,6 +439,11 @@ int mtk_clk_register_dividers(struct device *dev,
       for (i = 0; i <  num; i++) {
               const struct mtk_clk_divider *mcd = &mcds[i];
 
+             if (WARN(mcd->id >= clk_data->num,
+                      "Divider clock ID (%d) larger than expected (%d)\n",
+                      mcd->id, clk_data->num))
+                     continue;
+
               if (!IS_ERR_OR_NULL(clk_data->hws[mcd->id])) {
                       pr_warn("Trying to register duplicate clock ID: %d\n",
                               mcd->id);
@@ -432,6 +469,9 @@ int mtk_clk_register_dividers(struct device *dev,
       while (--i >= 0) {
               const struct mtk_clk_divider *mcd = &mcds[i];
 
+             if (mcd->id >= clk_data->num)
+                     continue;
+
               if (IS_ERR_OR_NULL(clk_data->hws[mcd->id]))
                       continue;
 
@@ -454,6 +494,9 @@ void mtk_clk_unregister_dividers(const struct mtk_clk_divider *mcds, int num,
       for (i = num; i > 0; i--) {
               const struct mtk_clk_divider *mcd = &mcds[i - 1];
 
+             if (mcd->id >= clk_data->num)
+                     continue;
+
               if (IS_ERR_OR_NULL(clk_data->hws[mcd->id]))
                       continue;