cmd: bind: Add unbind command with driver filter
PATCH v2 1/4 cmd: bind: Add unbind command with driver filter
Extend the driver core to perform lookup by both OF node and driver bound to the node. Use this to look up specific device instances to unbind from nodes in the unbind command. One example where this is needed is USB peripheral controller, which may have multiple gadget drivers bound to it. The unbind command has to select that specific gadget driver instance to unbind from the controller, not unbind the controller driver itself from the controller.
USB ethernet gadget usage looks as follows with this change. Notice the extra 'usb_ether' addition in the 'unbind' command at the end. "
bind /soc/usb-otg@49000000 usb_ether
setenv ethact usb_ether
setenv loadaddr 0xc2000000
setenv ipaddr 10.0.0.2
setenv serverip 10.0.0.1
setenv netmask 255.255.255.0
tftpboot 0xc2000000 10.0.0.1:test.file
unbind /soc/usb-otg@49000000 usb_ether
"
---
Cc: Kevin Hilman <[email protected]>
Cc: Lukasz Majewski <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Simon Glass <[email protected]>
---
V2: No change
--- cmd/bind.c | 10 +++++----- drivers/core/device.c | 20 +++++++++++++++----- include/dm/device.h | 17 +++++++++++++++++ 3 files changed, 37 insertions(+), 10 deletions(-)
cmd/bind.c +5 -5
@@ -162,7 +162,7 @@ static int bind_by_node_path(const char *path, const char *drv_name)return 0 ; } -static int unbind_by_node_path (const char *path) +static int unbind_by_node_path (const char *path,const char *drv_name) {struct udevice *dev;int ret;
@@ -174,7 +174,7 @@ static int unbind_by_node_path(const char *path)return -EINVAL ; } - ret =device_find_global_by_ofnode (ofnode, &dev); + ret =device_find_global_by_ofnode_driver (ofnode, drv_name, &dev);if (!dev || ret) {printf ("Cannot find a device with path %s\n" , path);
@@ -214,9 +214,9 @@ static int do_bind_unbind(struct cmd_tbl *cmdtp, int flag, int argc,return CMD_RET_USAGE ; ret =bind_by_node_path (argv[1 ], argv[2 ]); }else if (by_node && !bind) { -if (argc !=2 ) +if (argc !=2 && argc !=3 )return CMD_RET_USAGE ; - ret =unbind_by_node_path (argv[1 ]); + ret =unbind_by_node_path (argv[1 ], argv[2 ]); }else if (!by_node && bind) {int index = (argc >2 ) ?dectoul (argv[2 ],NULL ) :0 ;
@@ -251,7 +251,7 @@ U_BOOT_CMD(U_BOOT_CMD ( unbind,4 ,0 , do_bind_unbind,"Unbind a device from a driver" , -"<node path>\n" +"<node path> [<driver>]\n" "unbind <class> <index>\n" "unbind <class> <index> <driver>\n" );
drivers/core/device.c +15 -5
@@ -877,15 +877,17 @@ int device_get_child_by_of_offset(const struct udevice *parent, int node, }static struct udevice *_device_find_global_by_ofnode (struct udevice *parent, -ofnode ofnode) +ofnode ofnode, +const char *drv) {struct udevice *dev, *found; -if (ofnode_equal (dev_ofnode (parent), ofnode)) +if (ofnode_equal (dev_ofnode (parent), ofnode) && + (!drv || (drv && !strcmp (parent->driver->name, drv))))return parent; device_foreach_child(dev, parent) { - found =_device_find_global_by_ofnode (dev, ofnode); + found =_device_find_global_by_ofnode (dev, ofnode, drv);if (found)return found; }
@@ -895,7 +897,15 @@ static struct udevice *_device_find_global_by_ofnode(struct udevice *parent,int device_find_global_by_ofnode (ofnode ofnode,struct udevice **devp) { - *devp =_device_find_global_by_ofnode (gd->dm_root, ofnode); + *devp =_device_find_global_by_ofnode (gd->dm_root, ofnode,NULL ); + +return *devp ?0 : -ENOENT ; +} + +int device_find_global_by_ofnode_driver (ofnode ofnode,const char *drv, +struct udevice **devp) +{ + *devp =_device_find_global_by_ofnode (gd->dm_root, ofnode, drv);return *devp ?0 : -ENOENT ; }
@@ -904,7 +914,7 @@ int device_get_global_by_ofnode(ofnode ofnode, struct udevice **devp) {struct udevice *dev; - dev =_device_find_global_by_ofnode (gd->dm_root, ofnode); + dev =_device_find_global_by_ofnode (gd->dm_root, ofnode,NULL );return device_get_device_tail (dev, dev ?0 : -ENOENT , devp); }
include/dm/device.h +17 -0
@@ -748,6 +748,23 @@ int device_get_child_by_of_offset(const struct udevice *parent, int of_offset,int device_find_global_by_ofnode (ofnode node,struct udevice **devp); +/** +* device_find_global_by_ofnode_driver() - Get a device based on ofnode and driver +* +* Locates a device by its device tree ofnode and driver currently bound to +* it, searching globally throughout the all driver model devices. +* +* The device is NOT probed +* +* @node: Device tree ofnode to find +* @drv: Driver name bound to device +* @devp: Returns pointer to device if found, otherwise this is set to NULL +* Return: 0 if OK, -ve on error +*/ + +int device_find_global_by_ofnode_driver (ofnode node,const char *drv, +struct udevice **devp); +/** * device_get_global_by_ofnode() - Get a device based on ofnode *
Signature · 1 line
2.40.1
PATCH v2 2/4 usb: gadget: ether: Inline functions used once
These functions here are only ever called once since drop of non-DM networking code. Inline them. No functional change.
---
Cc: Kevin Hilman <[email protected]>
Cc: Lukasz Majewski <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Simon Glass <[email protected]>
---
V2: No change
--- drivers/usb/gadget/ether.c | 48 +++++++------------------------------- 1 file changed, 9 insertions(+), 39 deletions(-)
drivers/usb/gadget/ether.c +9 -39
@@ -2273,10 +2273,11 @@ fail: }/*-------------------------------------------------------------------------*/ -static void _usb_eth_halt (struct ether_priv *priv); +static void usb_eth_stop (struct udevice *dev); -static int _usb_eth_init (struct ether_priv *priv) +static int usb_eth_start (struct udevice *udev) { +struct ether_priv *priv =dev_get_priv (udev);struct eth_dev *dev = &priv->ethdev;struct usb_gadget *gadget;unsigned long ts;
@@ -2347,12 +2348,13 @@ static int _usb_eth_init(struct ether_priv *priv)rx_submit (dev, dev->rx_req,0 );return 0 ; fail: -_usb_eth_halt (priv); +usb_eth_stop (udev);return -1 ; } -static int _usb_eth_send (struct ether_priv *priv,void *packet,int length) +static int usb_eth_send (struct udevice *udev,void *packet,int length) { +struct ether_priv *priv =dev_get_priv (udev);int retval;void *rndis_pkt =NULL ;struct eth_dev *dev = &priv->ethdev;
@@ -2419,15 +2421,9 @@ drop:return -ENOMEM ; } -static int _usb_eth_recv (struct ether_priv *priv) -{ -usb_gadget_handle_interrupts (0 ); - -return 0 ; -} - -static void _usb_eth_halt (struct ether_priv *priv) +static void usb_eth_stop (struct udevice *udev) { +struct ether_priv *priv =dev_get_priv (udev);struct eth_dev *dev = &priv->ethdev;/* If the gadget not registered, simple return */
@@ -2459,31 +2455,12 @@ static void _usb_eth_halt(struct ether_priv *priv)usb_gadget_release (0 ); } -static int usb_eth_start (struct udevice *dev) -{ -struct ether_priv *priv =dev_get_priv (dev); - -return _usb_eth_init (priv); -} - -static int usb_eth_send (struct udevice *dev,void *packet,int length) -{ -struct ether_priv *priv =dev_get_priv (dev); - -return _usb_eth_send (priv, packet, length); -} -static int usb_eth_recv (struct udevice *dev,int flags,uchar **packetp) {struct ether_priv *priv =dev_get_priv (dev);struct eth_dev *ethdev = &priv->ethdev; -int ret; - ret =_usb_eth_recv (priv); -if (ret) { -pr_err ("error packet receive\n" ); -return ret; - } +usb_gadget_handle_interrupts (0 );if (packet_received) {if (ethdev->rx_req) {
@@ -2509,13 +2486,6 @@ static int usb_eth_free_pkt(struct udevice *dev, uchar *packet,return rx_submit (ethdev, ethdev->rx_req,0 ); } -static void usb_eth_stop (struct udevice *dev) -{ -struct ether_priv *priv =dev_get_priv (dev); - -_usb_eth_halt (priv); -} -static int usb_eth_probe (struct udevice *dev) {struct ether_priv *priv =dev_get_priv (dev);
Signature · 1 line
2.40.1
Re: [PATCH v2 2/4] usb: gadget: ether: Inline functions used once
Quoted 4 lines · Marek Vasut
These functions here are only ever called once since drop of non-DM networking code. Inline them. No functional change.
Signed-off-by Marek Vasut <[email protected]>
Signature · 1 line
Tom
PATCH v2 3/4 usb: gadget: ether: Move probe function above driver structure
In reply to Marek VasutMove the driver probe function above the driver structure, so it can be placed alongside other related functions, like upcoming remove function. No functional change.
---
Cc: Kevin Hilman <[email protected]>
Cc: Lukasz Majewski <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Simon Glass <[email protected]>
---
V2: No change
--- drivers/usb/gadget/ether.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)
drivers/usb/gadget/ether.c +14 -14
@@ -2486,20 +2486,6 @@ static int usb_eth_free_pkt(struct udevice *dev, uchar *packet,return rx_submit (ethdev, ethdev->rx_req,0 ); } -static int usb_eth_probe (struct udevice *dev) -{ -struct ether_priv *priv =dev_get_priv (dev); -struct eth_pdata *pdata =dev_get_plat (dev); - - priv->netdev = dev; - l_priv = priv; - -get_ether_addr (CONFIG_USBNET_DEV_ADDR , pdata->enetaddr); -eth_env_set_enetaddr ("usbnet_devaddr" , pdata->enetaddr); - -return 0 ; -} -static const struct eth_ops usb_eth_ops = { .start = usb_eth_start, .send = usb_eth_send,
@@ -2528,6 +2514,20 @@ int usb_ether_init(void)return 0 ; } +static int usb_eth_probe (struct udevice *dev) +{ +struct ether_priv *priv =dev_get_priv (dev); +struct eth_pdata *pdata =dev_get_plat (dev); + + priv->netdev = dev; + l_priv = priv; + +get_ether_addr (CONFIG_USBNET_DEV_ADDR , pdata->enetaddr); +eth_env_set_enetaddr ("usbnet_devaddr" , pdata->enetaddr); + +return 0 ; +} +U_BOOT_DRIVER (eth_usb) = { .name ="usb_ether" , .id =UCLASS_ETH ,
Signature · 1 line
2.40.1
Re: [PATCH v2 3/4] usb: gadget: ether: Move probe function above driver structure
Quoted 5 lines · Marek Vasut
Move the driver probe function above the driver structure, so it can be placed alongside other related functions, like upcoming remove function. No functional change.
Signed-off-by Marek Vasut <[email protected]>
Signature · 1 line
Tom
PATCH v2 4/4 usb: gadget: ether: Handle gadget driver registration in probe and remove
In reply to Marek VasutMove the ethernet gadget driver registration and removal from ethernet bind and unbind callbacks into driver DM probe and remove callbacks. This way, when the driver is bound, which is triggered deliberately using 'bind' command, the USB ethernet gadget driver is instantiated and bound to the matching UDC. In reverse, when the driver is unbound, which is again triggered deliberately using 'unbind' command, the USB ethernet gadget driver instance is removed.
Effectively, this now behaves like running either 'ums' or 'dfu' or any other commands utilizing USB gadget functionality.
This also drops use of usb_gadget_initialize()/usb_gadget_release(), which are helper functions implemented in the UDC uclass to bind and unbind UDC drivers to controllers from U-Boot command line. Those have no place in drivers.
---
NOTE: This must be thoroughly tested.
---
Cc: Kevin Hilman <[email protected]>
Cc: Lukasz Majewski <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Simon Glass <[email protected]>
---
V2: Fix up return value handling in probe
--- drivers/usb/gadget/ether.c | 87 +++++++++++++++++++------------------- 1 file changed, 43 insertions(+), 44 deletions(-)
drivers/usb/gadget/ether.c +43 -44
@@ -2281,49 +2281,8 @@ static int usb_eth_start(struct udevice *udev)struct eth_dev *dev = &priv->ethdev;struct usb_gadget *gadget;unsigned long ts; -int ret;unsigned long timeout =USB_CONNECT_TIMEOUT ; - ret =usb_gadget_initialize (0 ); -if (ret) -return ret; - -/* Configure default mac-addresses for the USB ethernet device */ -#ifdef CONFIG_USBNET_DEV_ADDR -strlcpy (dev_addr,CONFIG_USBNET_DEV_ADDR ,sizeof (dev_addr)); -#endif -#ifdef CONFIG_USBNET_HOST_ADDR -strlcpy (host_addr,CONFIG_USBNET_HOST_ADDR ,sizeof (host_addr)); -#endif -/* Check if the user overruled the MAC addresses */ -if (env_get ("usbnet_devaddr" )) -strlcpy (dev_addr,env_get ("usbnet_devaddr" ), -sizeof (dev_addr)); - -if (env_get ("usbnet_hostaddr" )) -strlcpy (host_addr,env_get ("usbnet_hostaddr" ), -sizeof (host_addr)); - -if (!is_eth_addr_valid (dev_addr)) { -pr_err ("Need valid 'usbnet_devaddr' to be set" ); - goto fail; - } -if (!is_eth_addr_valid (host_addr)) { -pr_err ("Need valid 'usbnet_hostaddr' to be set" ); - goto fail; - } - - priv->eth_driver.speed =DEVSPEED ; - priv->eth_driver.bind = eth_bind; - priv->eth_driver.unbind = eth_unbind; - priv->eth_driver.setup = eth_setup; - priv->eth_driver.reset = eth_disconnect; - priv->eth_driver.disconnect = eth_disconnect; - priv->eth_driver.suspend = eth_suspend; - priv->eth_driver.resume = eth_resume; -if (usb_gadget_register_driver (&priv->eth_driver) <0 ) - goto fail; - dev->network_started =0 ; packet_received =0 ;
@@ -2450,9 +2409,6 @@ static void usb_eth_stop(struct udevice *udev)usb_gadget_handle_interrupts (0 ); dev->network_started =0 ; } - -usb_gadget_unregister_driver (&priv->eth_driver); -usb_gadget_release (0 ); }static int usb_eth_recv (struct udevice *dev,int flags,uchar **packetp)
@@ -2525,6 +2481,48 @@ static int usb_eth_probe(struct udevice *dev)get_ether_addr (CONFIG_USBNET_DEV_ADDR , pdata->enetaddr);eth_env_set_enetaddr ("usbnet_devaddr" , pdata->enetaddr); +/* Configure default mac-addresses for the USB ethernet device */ +#ifdef CONFIG_USBNET_DEV_ADDR +strlcpy (dev_addr,CONFIG_USBNET_DEV_ADDR ,sizeof (dev_addr)); +#endif +#ifdef CONFIG_USBNET_HOST_ADDR +strlcpy (host_addr,CONFIG_USBNET_HOST_ADDR ,sizeof (host_addr)); +#endif +/* Check if the user overruled the MAC addresses */ +if (env_get ("usbnet_devaddr" )) +strlcpy (dev_addr,env_get ("usbnet_devaddr" ), +sizeof (dev_addr)); + +if (env_get ("usbnet_hostaddr" )) +strlcpy (host_addr,env_get ("usbnet_hostaddr" ), +sizeof (host_addr)); + +if (!is_eth_addr_valid (dev_addr)) { +pr_err ("Need valid 'usbnet_devaddr' to be set" ); +return -EINVAL ; + } +if (!is_eth_addr_valid (host_addr)) { +pr_err ("Need valid 'usbnet_hostaddr' to be set" ); +return -EINVAL ; + } + + priv->eth_driver.speed =DEVSPEED ; + priv->eth_driver.bind = eth_bind; + priv->eth_driver.unbind = eth_unbind; + priv->eth_driver.setup = eth_setup; + priv->eth_driver.reset = eth_disconnect; + priv->eth_driver.disconnect = eth_disconnect; + priv->eth_driver.suspend = eth_suspend; + priv->eth_driver.resume = eth_resume; +return usb_gadget_register_driver (&priv->eth_driver); +} + +static int usb_eth_remove (struct udevice *dev) +{ +struct ether_priv *priv =dev_get_priv (dev); + +usb_gadget_unregister_driver (&priv->eth_driver); +return 0 ; }
@@ -2532,6 +2530,7 @@ U_BOOT_DRIVER(eth_usb) = { .name = "usb_ether", .id = UCLASS_ETH, .probe = usb_eth_probe, + .remove = usb_eth_remove, .ops = &usb_eth_ops, .priv_auto = sizeof(struct ether_priv), .plat_auto = sizeof(struct eth_pdata),
Signature · 1 line
2.40.1
Quoted 30 lines · Marek Vasut
Extend the driver core to perform lookup by both OF node and driver bound to the node. Use this to look up specific device instances to unbind from nodes in the unbind command. One example where this is needed is USB peripheral controller, which may have multiple gadget drivers bound to it. The unbind command has to select that specific gadget driver instance to unbind from the controller, not unbind the controller driver itself from the controller.
USB ethernet gadget usage looks as follows with this change. Notice the extra '
usb_ether' addition in the 'unbind' command at the end. "
bind /soc/usb-otg@49000000usb_ether
setenv ethactusb_ether
setenv loadaddr0xc2000000
setenv ipaddr 10.0.0.2
setenv serverip 10.0.0.1
setenv netmask 255.255.255.0
tftpboot0xc200000010.0.0.1:test.file
unbind /soc/usb-otg@49000000usb_ether
"Signed-off-by Marek Vasut <[email protected]>---
Cc: Kevin Hilman <[email protected]>
Cc: Lukasz Majewski <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Simon Glass <[email protected]>
---
V2: No change
Quoted 5 lines
--- cmd/bind.c | 10 +++++----- drivers/core/device.c | 20 +++++++++++++++----- include/dm/device.h | 17 +++++++++++++++++ 3 files changed, 37 insertions(+), 10 deletions(-)
Can we have a test?
Regards,
Simon
Quoted 37 lines · Simon Glass
Quoted 30 lines · Marek Vasut
Extend the driver core to perform lookup by both OF node and driver bound to the node. Use this to look up specific device instances to unbind from nodes in the unbind command. One example where this is needed is USB peripheral controller, which may have multiple gadget drivers bound to it. The unbind command has to select that specific gadget driver instance to unbind from the controller, not unbind the controller driver itself from the controller.
USB ethernet gadget usage looks as follows with this change. Notice the extra '
usb_ether' addition in the 'unbind' command at the end. "
bind /soc/usb-otg@49000000usb_ether
setenv ethactusb_ether
setenv loadaddr0xc2000000
setenv ipaddr 10.0.0.2
setenv serverip 10.0.0.1
setenv netmask 255.255.255.0
tftpboot0xc200000010.0.0.1:test.file
unbind /soc/usb-otg@49000000usb_ether
"Signed-off-by Marek Vasut <[email protected]>---
Cc: Kevin Hilman <[email protected]>
Cc: Lukasz Majewski <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Simon Glass <[email protected]>
---
V2: No changeQuoted 5 lines
--- cmd/bind.c | 10 +++++----- drivers/core/device.c | 20 +++++++++++++++----- include/dm/device.h | 17 +++++++++++++++++ 3 files changed, 37 insertions(+), 10 deletions(-)
Quoted 1 line
Can we have a test?
I added it into my todo queue.
Anything else or is the patch OK ?
Hi Marek,
Quoted 39 lines · Marek Vasut
Quoted 37 lines · Simon Glass
Quoted 35 lines · Marek Vasut
Extend the driver core to perform lookup by both OF node and driver bound to the node. Use this to look up specific device instances to unbind from nodes in the unbind command. One example where this is needed is USB peripheral controller, which may have multiple gadget drivers bound to it. The unbind command has to select that specific gadget driver instance to unbind from the controller, not unbind the controller driver itself from the controller.
USB ethernet gadget usage looks as follows with this change. Notice the extra '
usb_ether' addition in the 'unbind' command at the end. "
bind /soc/usb-otg@49000000usb_ether
setenv ethactusb_ether
setenv loadaddr0xc2000000
setenv ipaddr 10.0.0.2
setenv serverip 10.0.0.1
setenv netmask 255.255.255.0
tftpboot0xc200000010.0.0.1:test.file
unbind /soc/usb-otg@49000000usb_ether
"Signed-off-by Marek Vasut <[email protected]>---
Cc: Kevin Hilman <[email protected]>
Cc: Lukasz Majewski <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Simon Glass <[email protected]>
---
V2: No change--- cmd/bind.c | 10 +++++----- drivers/core/device.c | 20 +++++++++++++++----- include/dm/device.h | 17 +++++++++++++++++ 3 files changed, 37 insertions(+), 10 deletions(-)
Quoted 5 lines
Quoted 1 line
Can we have a test?
I added it into my todo queue.
Anything else or is the patch OK ?
That's my only comment.
Regards,
Simon
Quoted 29 lines · Marek Vasut
Extend the driver core to perform lookup by both OF node and driver bound to the node. Use this to look up specific device instances to unbind from nodes in the unbind command. One example where this is needed is USB peripheral controller, which may have multiple gadget drivers bound to it. The unbind command has to select that specific gadget driver instance to unbind from the controller, not unbind the controller driver itself from the controller.
USB ethernet gadget usage looks as follows with this change. Notice the extra '
usb_ether' addition in the 'unbind' command at the end. "
bind /soc/usb-otg@49000000usb_ether
setenv ethactusb_ether
setenv loadaddr0xc2000000
setenv ipaddr 10.0.0.2
setenv serverip 10.0.0.1
setenv netmask 255.255.255.0
tftpboot0xc200000010.0.0.1:test.file
unbind /soc/usb-otg@49000000usb_ether
"Signed-off-by Marek Vasut <[email protected]>---
Cc: Kevin Hilman <[email protected]>
Cc: Lukasz Majewski <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Simon Glass <[email protected]>
---
V2: No change
Quoted 5 lines
--- cmd/bind.c | 10 +++++----- drivers/core/device.c | 20 +++++++++++++++----- include/dm/device.h | 17 +++++++++++++++++ 3 files changed, 37 insertions(+), 10 deletions(-)
Conceptually this seems fine to me. Simon?
Signature · 1 line
Tom
Hi Marek,
[email protected] wrote on Mon, 17 Jul 2023 13:21:34 +0200:
Quoted 8 lines
Extend the driver core to perform lookup by both OF node and driver bound to the node. Use this to look up specific device instances to unbind from nodes in the unbind command. One example where this is needed is USB peripheral controller, which may have multiple gadget drivers bound to it. The unbind command has to select that specific gadget driver instance to unbind from the controller, not unbind the controller driver itself from the controller.
Quoted 4 lines
USB ethernet gadget usage looks as follows with this change. Notice the extra '
usb_ether' addition in the 'unbind' command at the end. "
bind /soc/usb-otg@49000000usb_ether
I don't really get why this is needed? Yes, having proper bind and unbind methods and having them called internally is relevant, but when you have a single OTG controller, why is this needed? It basically breaks the CLI, making bisects more painful and all updates just fail.
Quoted 9 lines
setenv ethact
usb_ether
setenv loadaddr0xc2000000
setenv ipaddr 10.0.0.2
setenv serverip 10.0.0.1
setenv netmask 255.255.255.0
tftpboot0xc200000010.0.0.1:test.file
unbind /soc/usb-otg@49000000usb_ether
"
Quoted 6 lines
Signed-off-by Marek Vasut <[email protected]>---
Cc: Kevin Hilman <[email protected]>
Cc: Lukasz Majewski <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Simon Glass <[email protected]>
I've tested the whole series, unfortunately is does not work on AM335x/BBBW:
* Any recovery attempted using the network will now fail in the SPL, where, AFAIK, there is no way to manually bind:
U-Boot SPL 2023.07-00806-gac80e6de9cf (Jul 23 2023 - 19:45:51 +0200) Trying to boot from USB eth
Could not get PHY for eth_cpsw: addr 0
eth0: eth_cpswusing musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
, eth1: usb_ether
* The bind command was not available on my default configuration, making it even difficult for people unaware that this command is now required to fix their common commands.
* Any command that expects the usb_ether driver will now fail badly even after the bind call:
=> bind /ocp/usb@47400000/usb@47401000 usb_ether
=> fastboot usb 0
couldn't find an available UDCg_dnl_register: failed!, error: -19
exit not allowed from main input shell.
=> tftp 0x81000000 zImagedev_get_priv: null device
data abort
pc : [<9ffa04ba>] lr : [<9ff86d5f>]
reloc pc : [<8083b4ba>] lr : [<80821d5f>]
sp : 9df2f920 ip : 00000000 fp : 00000003
r10: 9df4cf48 r9 : 9df44ea0 r8 : 9ffec33c
r7 : 00004a53 r6 : 00000000 r5 : 00000bb8 r4 : 9df4d3c0
r3 : 9ff97653 r2 : fff1102c r1 : 00000000 r0 : 00000000
Flags: nzcv IRQs off FIQs on Mode SVC_32 (T)
Code: 9ffd b508 f7e6 fc4b (6801) 2000
Resetting CPU ...
Is there anything I missed?
Thanks,
Miquèl
Quoted 1 line · Miquel Raynal
Hi Marek,
Hi,
Quoted 10 lines
[email protected] wrote on Mon, 17 Jul 2023 13:21:34 +0200:
Quoted 8 lines
Extend the driver core to perform lookup by both OF node and driver bound to the node. Use this to look up specific device instances to unbind from nodes in the unbind command. One example where this is needed is USB peripheral controller, which may have multiple gadget drivers bound to it. The unbind command has to select that specific gadget driver instance to unbind from the controller, not unbind the controller driver itself from the controller.
Quoted 8 lines
Quoted 4 lines
USB ethernet gadget usage looks as follows with this change. Notice the extra '
usb_ether' addition in the 'unbind' command at the end. "
bind /soc/usb-otg@49000000usb_etherI don't really get why this is needed? Yes, having proper bind and unbind methods and having them called internally is relevant, but when you have a single OTG controller, why is this needed?
Because you do need to bind the usb_ether driver to a controller.
I suspect you are trying to point in the direction of usb_ether_init() , right ? That is bogus and should be removed, because that is hard-coding one specific (ethernet) function to an OTG controller.
Quoted 2 lines
It basically
breaks the CLI
Can you elaborate on this ?
How does calling a 'bind' command breaks CLI ?
Quoted 1 line
, making bisects more painful and all updates just fail.
This is just utter nonsense, sorry.
Quoted 22 lines
Quoted 9 lines
setenv ethact
usb_ether
setenv loadaddr0xc2000000
setenv ipaddr 10.0.0.2
setenv serverip 10.0.0.1
setenv netmask 255.255.255.0
tftpboot0xc200000010.0.0.1:test.file
unbind /soc/usb-otg@49000000usb_ether
"Quoted 6 lines
Signed-off-by Marek Vasut <[email protected]>---
Cc: Kevin Hilman <[email protected]>
Cc: Lukasz Majewski <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Simon Glass <[email protected]>I've tested the whole series, unfortunately is does not work on AM335x/BBBW:
* Any recovery attempted using the network will now fail in the SPL, where, AFAIK, there is no way to manually bind:
Quoted 8 lines
U-Boot SPL 2023.07-00806-gac80e6de9cf (Jul 23 2023 - 19:45:51 +0200) Trying to boot from USB eth
Could not get PHY foreth_cpsw: addr 0
eth0:eth_cpswusingmusb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
, eth1:usb_ether
It seems the RNDIS adapter is actually ready based on the above ^ ?
Quoted 3 lines
* The bind command was not available on my default configuration, making it even difficult for people unaware that this command is now required to fix their common commands.
It has been required ever since, it's just that many ignored the need to move over to DM and depended on board-specific hackage to set up their USB ethernet. Now that hackage broke, time to switch to the proper way.
Quoted 6 lines
* Any command that expects the
usb_etherdriver will now fail badly even after the bind call:=> bind /ocp/usb@47400000/usb@47401000
usb_ether
=> fastboot usb 0
couldn't find an available UDC
You already have the ethernet function bound to the UDC and now you are trying to bind another function, fastboot, right ? This is likely the problem. Unbind the ethernet first, then use fastboot.
Quoted 12 lines
g_dnl_register: failed!, error: -19
exit not allowed from main input shell.
=> tftp0x81000000zImagedev_get_priv: null device
data abortpc : [<9ffa04ba>] lr : [<9ff86d5f>]reloc pc : [<
8083b4ba>] lr : [<80821d5f>]
sp :9df2f920ip : 00000000 fp : 00000003
r10:9df4cf48r9 :9df44ea0r8 :9ffec33c
r7 :00004a53r6 : 00000000 r5 :00000bb8r4 :9df4d3c0
r3 :9ff97653r2 :fff1102cr1 : 00000000 r0 : 00000000
Flags: nzcv IRQs off FIQs on ModeSVC_32(T)
Quoted 4 lines
Code: 9ffd b508 f7e6 fc4b (6801) 2000Resetting CPU ...
Is there anything I missed?
Please see above.
Hi Marek,
[email protected] wrote on Sun, 23 Jul 2023 23:45:55 +0200:
Quoted 20 lines · Miquel Raynal
Quoted 1 line
Hi Marek,
Hi,
Quoted 15 lines
[email protected] wrote on Mon, 17 Jul 2023 13:21:34 +0200:
Quoted 12 lines
Extend the driver core to perform lookup by both OF node and driver bound to the node. Use this to look up specific device instances to unbind from nodes in the unbind command. One example where this is needed is USB peripheral controller, which may have multiple gadget drivers bound to it. The unbind command has to select that specific gadget driver instance to unbind from the controller, not unbind the controller driver itself from the controller.
USB ethernet gadget usage looks as follows with this change. Notice the extra '
usb_ether' addition in the 'unbind' command at the end. "
bind /soc/usb-otg@49000000usb_ether
Quoted 5 lines
Quoted 3 lines
I don't really get why this is needed? Yes, having proper bind and unbind methods and having them called internally is relevant, but when you have a single OTG controller, why is this needed?
Because you do need to bind the
usb_etherdriver to a controller.
Right now it seems that binding is kind of performed in the context of a command execution (and then everything is cleaned up). I also think it is not optimal, but I would like to avoid breaking common commands like you propose. At the *very least* the error messages should be very clear about what has changed and what the user needs to do now in order to workaround it. But the best would be to avoid user interaction as much as possible. So why not load the first driver needed and expect the user the run the correct unbind/bind commands if it wants to change?
Quoted 1 line
I suspect you are trying to point in the direction of
usb_ether_init(), right ? That is bogus and should be removed, because that is hard-coding one specific (ethernet) function to an OTG controller.
Well, hardcoding is bad, but setting a default is often useful and much more user friendly, IMHO.
Quoted 7 lines
Quoted 3 lines
It basically
breaks the CLICan you elaborate on this ?
How does calling a 'bind' command breaks CLI ?
I've attempted a bisect between U-Boot 2018 and 2023, it was already very painful. But if I try again in 2024 and need to cope with the new rules added in 2023 for binding drivers which were not needed until, then it becomes even more painful. So yes, it breaks the CLI. Before:
=> tftp xxx
=> fastboot xxx
just worked, after you patchset these simple operations won't work anymore.
Quoted 3 lines
Quoted 1 line
, making bisects more painful and all updates just fail.
This is just utter nonsense, sorry.
Well, I am a U-Boot user, and I expect this change to break a good amount of boot scripts after an update.
Quoted 31 lines
Quoted 22 lines
Quoted 9 lines
setenv ethact
usb_ether
setenv loadaddr0xc2000000
setenv ipaddr 10.0.0.2
setenv serverip 10.0.0.1
setenv netmask 255.255.255.0
tftpboot0xc200000010.0.0.1:test.file
unbind /soc/usb-otg@49000000usb_ether
"Quoted 6 lines
Signed-off-by Marek Vasut <[email protected]>---
Cc: Kevin Hilman <[email protected]>
Cc: Lukasz Majewski <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Simon Glass <[email protected]>I've tested the whole series, unfortunately is does not work on AM335x/BBBW:
* Any recovery attempted using the network will now fail in the SPL, where, AFAIK, there is no way to manually bind:
Quoted 8 lines
U-Boot SPL 2023.07-00806-gac80e6de9cf (Jul 23 2023 - 19:45:51 +0200) Trying to boot from USB eth
Could not get PHY foreth_cpsw: addr 0
eth0:eth_cpswusingmusb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
, eth1:usb_ether
Quoted 7 lines
It seems the RNDIS adapter is actually ready based on the above ^ ?
Quoted 3 lines
* The bind command was not available on my default configuration, making it even difficult for people unaware that this command is now required to fix their common commands.
It has been required ever since, it's just that many ignored the need to move over to DM and depended on board-specific hackage to set up their USB ethernet. Now that hackage broke, time to switch to the proper way.
It breaks because there is something wrong elsewhere. It's not at all the fault of the board hack (if any, I have no idea, I'll trust your judgment regarding the BBB support). My series fixes a real problem in the current code. The fact that it won't be visible after your series is almost anecdotic... until it triggers again for whatever reason.
Quoted 24 lines
Quoted 6 lines
* Any command that expects the
usb_etherdriver will now fail badly even after the bind call:=> bind /ocp/usb@47400000/usb@47401000
usb_ether
=> fastboot usb 0
couldn't find an available UDCYou already have the ethernet function bound to the UDC and now you are trying to bind another function, fastboot, right ? This is likely the problem. Unbind the ethernet first, then use fastboot.
Quoted 15 lines
g_dnl_register: failed!, error: -19
exit not allowed from main input shell.
=> tftp0x81000000zImagedev_get_priv: null device
data abortpc : [<9ffa04ba>] lr : [<9ff86d5f>]reloc pc : [<
8083b4ba>] lr : [<80821d5f>]
sp :9df2f920ip : 00000000 fp : 00000003
r10:9df4cf48r9 :9df44ea0r8 :9ffec33c
r7 :00004a53r6 : 00000000 r5 :00000bb8r4 :9df4d3c0
r3 :9ff97653r2 :fff1102cr1 : 00000000 r0 : 00000000
Flags: nzcv IRQs off FIQs on ModeSVC_32(T)Code: 9ffd b508 f7e6 fc4b (6801) 2000Resetting CPU ...
Quoted 3 lines
Quoted 1 line
Is there anything I missed?
Please see above.
Sorry for disturbing you with the fastboot command. Can you advise a couple of commands to test fastboot then? I don't find the relevant driver name to use.
Here is a boot without anything else than a tftp, no change:
U-Boot SPL 2023.07-00806-gac80e6de9cf (Jul 23 2023 - 19:45:51 +0200) Trying to boot from MMC2
U-Boot 2023.07-00806-gac80e6de9cf (Jul 23 2023 - 19:45:51 +0200)
CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB Core: 160 devices, 18 uclasses, devicetree: separate WDT: Started wdt@44e35000 with servicing every 1000ms (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Loading Environment from FAT... Unable to read "uboot.env" from mmc1:1... <ethaddr> not set. Validating first E-fuse MAC
Net: Could not get PHY for ethernet@4a100000: addr 0
eth2: ethernet@4a100000using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
, eth3: usb_ether
=> bind /ocp/usb@47400000/usb@47401000 usb_ether
=> tftp 0x81000000 zImagedev_get_priv: null device
data abort
pc : [<9ffa04ba>] lr : [<9ff86d5f>]
reloc pc : [<8083b4ba>] lr : [<80821d5f>]
sp : 9df2f920 ip : 00000000 fp : 00000003
r10: 9df4cf48 r9 : 9df44ea0 r8 : 9ffec33c
r7 : 0000538c r6 : 00000000 r5 : 00000bb8 r4 : 9df4d3c0
r3 : 9ff97653 r2 : fff69249 r1 : 00000000 r0 : 00000000
Flags: nzcv IRQs off FIQs on Mode SVC_32 (T)
Code: 9ffd b508 f7e6 fc4b (6801) 2000
Resetting CPU ...
Thanks,
Miquèl
Quoted 1 line · Miquel Raynal
Hi Marek,
Hi,
Please test V3
Quoted 17 lines · Miquel Raynal
Hi Marek,
[email protected] wrote on Mon, 17 Jul 2023 13:21:34 +0200:
Quoted 8 lines
Extend the driver core to perform lookup by both OF node and driver bound to the node. Use this to look up specific device instances to unbind from nodes in the unbind command. One example where this is needed is USB peripheral controller, which may have multiple gadget drivers bound to it. The unbind command has to select that specific gadget driver instance to unbind from the controller, not unbind the controller driver itself from the controller.
Quoted 4 lines
USB ethernet gadget usage looks as follows with this change. Notice the extra '
usb_ether' addition in the 'unbind' command at the end. "
bind /soc/usb-otg@49000000usb_ether
Quoted 4 lines
I don't really get why this is needed? Yes, having proper bind and unbind methods and having them called internally is relevant, but when you have a single OTG controller, why is this needed? It basically breaks the CLI, making bisects more painful and all updates just fail.
I think part of the issue here is how usb_ether didn't act like the rest of the gadget do, for example fastboot.
Quoted 22 lines
Quoted 9 lines
setenv ethact
usb_ether
setenv loadaddr0xc2000000
setenv ipaddr 10.0.0.2
setenv serverip 10.0.0.1
setenv netmask 255.255.255.0
tftpboot0xc200000010.0.0.1:test.file
unbind /soc/usb-otg@49000000usb_ether
"Quoted 6 lines
Signed-off-by Marek Vasut <[email protected]>---
Cc: Kevin Hilman <[email protected]>
Cc: Lukasz Majewski <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Simon Glass <[email protected]>I've tested the whole series, unfortunately is does not work on AM335x/BBBW:
* Any recovery attempted using the network will now fail in the SPL, where, AFAIK, there is no way to manually bind:
Quoted 8 lines
U-Boot SPL 2023.07-00806-gac80e6de9cf (Jul 23 2023 - 19:45:51 +0200) Trying to boot from USB eth
Could not get PHY foreth_cpsw: addr 0
eth0:eth_cpswusingmusb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
, eth1:usb_ether
For testing, what happens if you disable CPSW? Does it both bind (as it shows here) and then use the expected device?
Quoted 3 lines
* The bind command was not available on my default configuration, making it even difficult for people unaware that this command is now required to fix their common commands.
Yes, we'll need to make that default y if USB_ETHER.
Quoted 10 lines
* Any command that expects the
usb_etherdriver will now fail badly even after the bind call:=> bind /ocp/usb@47400000/usb@47401000
usb_ether
=> fastboot usb 0
couldn't find an available UDCg_dnl_register: failed!, error: -19
exit not allowed from main input shell.
=> tftp0x81000000zImagedev_get_priv: null device
Well, does it work if you do:
bind /ocp/usb@47400000/usb@47401000 usb_ether
tftp 0x81000000 zImage
?
Signature · 1 line
Tom
Hi Tom,
[email protected] wrote on Mon, 24 Jul 2023 14:13:45 -0400:
Quoted 18 lines · Miquel Raynal
Quoted 17 lines
Hi Marek,
[email protected] wrote on Mon, 17 Jul 2023 13:21:34 +0200:
Quoted 12 lines
Extend the driver core to perform lookup by both OF node and driver bound to the node. Use this to look up specific device instances to unbind from nodes in the unbind command. One example where this is needed is USB peripheral controller, which may have multiple gadget drivers bound to it. The unbind command has to select that specific gadget driver instance to unbind from the controller, not unbind the controller driver itself from the controller.
USB ethernet gadget usage looks as follows with this change. Notice the extra '
usb_ether' addition in the 'unbind' command at the end. "
bind /soc/usb-otg@49000000usb_ether
Quoted 7 lines
Quoted 4 lines
I don't really get why this is needed? Yes, having proper bind and unbind methods and having them called internally is relevant, but when you have a single OTG controller, why is this needed? It basically breaks the CLI, making bisects more painful and all updates just fail.
I think part of the issue here is how
usb_etherdidn't act like the rest of the gadget do, for example fastboot.
It definitely is. "before it was working, now it does not anymore". That's the gut feeling many people get when the community breaks common habits. If we break something like this, we must at least be very clear on what is the new behavior.
Quoted 31 lines
Quoted 22 lines
Quoted 9 lines
setenv ethact
usb_ether
setenv loadaddr0xc2000000
setenv ipaddr 10.0.0.2
setenv serverip 10.0.0.1
setenv netmask 255.255.255.0
tftpboot0xc200000010.0.0.1:test.file
unbind /soc/usb-otg@49000000usb_ether
"Quoted 6 lines
Signed-off-by Marek Vasut <[email protected]>---
Cc: Kevin Hilman <[email protected]>
Cc: Lukasz Majewski <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Simon Glass <[email protected]>I've tested the whole series, unfortunately is does not work on AM335x/BBBW:
* Any recovery attempted using the network will now fail in the SPL, where, AFAIK, there is no way to manually bind:
Quoted 8 lines
U-Boot SPL 2023.07-00806-gac80e6de9cf (Jul 23 2023 - 19:45:51 +0200) Trying to boot from USB eth
Could not get PHY foreth_cpsw: addr 0
eth0:eth_cpswusingmusb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
, eth1:usb_ether
Quoted 2 lines
For testing, what happens if you disable CPSW? Does it both bind (as it shows here) and then use the expected device?
Disabling CPSW breaks the link, I had to ensure ft_board_setup in the am335x arch folder was still available (and returned 0). But once I managed to start I did not observe any improvements.
U-Boot SPL 2023.07-00806-gac80e6de9cf-dirty (Jul 28 2023 - 14:49:48 +0200) Trying to boot from USB eth
Could not get PHY for eth_cpsw: addr 0
eth0: eth_cpswusing musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
, eth1: usb_ether
Quoted 5 lines
Quoted 3 lines
* The bind command was not available on my default configuration, making it even difficult for people unaware that this command is now required to fix their common commands.
Yes, we'll need to make that default y if
USB_ETHER.
Agreed.
Quoted 11 lines
Quoted 10 lines
* Any command that expects the
usb_etherdriver will now fail badly even after the bind call:=> bind /ocp/usb@47400000/usb@47401000
usb_ether
=> fastboot usb 0
couldn't find an available UDCg_dnl_register: failed!, error: -19
exit not allowed from main input shell.
=> tftp0x81000000zImagedev_get_priv: null device
Quoted 4 lines
Well, does it work if you do:
bind /ocp/usb@47400000/usb@47401000usb_ether
tftp0x81000000zImage
?
No, I already tried both:
U-Boot SPL 2023.07-00806-gac80e6de9cf (Jul 23 2023 - 19:45:51 +0200) Trying to boot from MMC2
U-Boot 2023.07-00806-gac80e6de9cf (Jul 23 2023 - 19:45:51 +0200)
CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB Core: 160 devices, 18 uclasses, devicetree: separate WDT: Started wdt@44e35000 with servicing every 1000ms (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Loading Environment from FAT... Unable to read "uboot.env" from mmc1:1... <ethaddr> not set. Validating first E-fuse MAC
Net: Could not get PHY for ethernet@4a100000: addr 0
eth2: ethernet@4a100000using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
, eth3: usb_ether
=> bind /ocp/usb@47400000/usb@47401000 usb_ether
=> tftp 0x81000000 zImagedev_get_priv: null device
data abort
pc : [<9ffa04ba>] lr : [<9ff86d5f>]
reloc pc : [<8083b4ba>] lr : [<80821d5f>]
sp : 9df2f920 ip : 00000000 fp : 00000003
r10: 9df4cf48 r9 : 9df44ea0 r8 : 9ffec33c
r7 : 0000538c r6 : 00000000 r5 : 00000bb8 r4 : 9df4d3c0
r3 : 9ff97653 r2 : fff69249 r1 : 00000000 r0 : 00000000
Flags: nzcv IRQs off FIQs on Mode SVC_32 (T)
Code: 9ffd b508 f7e6 fc4b (6801) 2000
Resetting CPU ...
resetting ...
Thanks,
Miquèl
Quoted 27 lines · Miquel Raynal
Hi Tom,
[email protected] wrote on Mon, 24 Jul 2023 14:13:45 -0400:
Quoted 23 lines · Miquel Raynal
Quoted 21 lines
Hi Marek,
[email protected] wrote on Mon, 17 Jul 2023 13:21:34 +0200:
Quoted 8 lines
Extend the driver core to perform lookup by both OF node and driver bound to the node. Use this to look up specific device instances to unbind from nodes in the unbind command. One example where this is needed is USB peripheral controller, which may have multiple gadget drivers bound to it. The unbind command has to select that specific gadget driver instance to unbind from the controller, not unbind the controller driver itself from the controller.
Quoted 4 lines
USB ethernet gadget usage looks as follows with this change. Notice the extra '
usb_ether' addition in the 'unbind' command at the end. "
bind /soc/usb-otg@49000000usb_etherI don't really get why this is needed? Yes, having proper bind and unbind methods and having them called internally is relevant, but when you have a single OTG controller, why is this needed? It basically breaks the CLI, making bisects more painful and all updates just fail.
Quoted 7 lines
Quoted 2 lines
I think part of the issue here is how
usb_etherdidn't act like the rest of the gadget do, for example fastboot.It definitely is. "before it was working, now it does not anymore". That's the gut feeling many people get when the community breaks common habits. If we break something like this, we must at least be very clear on what is the new behavior.
I'm not sure that in the end there will be a behavior change here, but the first step to figuring out if things do or don't automatically bind right in the end is to fix the MUSB problem (see below). Then we can worry if there's a real behavior change or not.
Quoted 38 lines
Quoted 31 lines
Quoted 22 lines
Quoted 9 lines
setenv ethact
usb_ether
setenv loadaddr0xc2000000
setenv ipaddr 10.0.0.2
setenv serverip 10.0.0.1
setenv netmask 255.255.255.0
tftpboot0xc200000010.0.0.1:test.file
unbind /soc/usb-otg@49000000usb_ether
"Quoted 6 lines
Signed-off-by Marek Vasut <[email protected]>---
Cc: Kevin Hilman <[email protected]>
Cc: Lukasz Majewski <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Simon Glass <[email protected]>I've tested the whole series, unfortunately is does not work on AM335x/BBBW:
* Any recovery attempted using the network will now fail in the SPL, where, AFAIK, there is no way to manually bind:
Quoted 8 lines
U-Boot SPL 2023.07-00806-gac80e6de9cf (Jul 23 2023 - 19:45:51 +0200) Trying to boot from USB eth
Could not get PHY foreth_cpsw: addr 0
eth0:eth_cpswusingmusb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
, eth1:usb_etherQuoted 2 lines
For testing, what happens if you disable CPSW? Does it both bind (as it shows here) and then use the expected device?
Disabling CPSW breaks the link, I had to ensure
ft_board_setupin the am335x arch folder was still available (and returned 0). But once I managed to start I did not observe any improvements.
Quoted 8 lines
U-Boot SPL 2023.07-00806-gac80e6de9cf-dirty (Jul 28 2023 - 14:49:48 +0200) Trying to boot from USB eth
Could not get PHY foreth_cpsw: addr 0
eth0:eth_cpswusingmusb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
, eth1:usb_ether
So it's just not working, is what we both observe, on this platform.
Quoted 52 lines
Quoted 5 lines
Quoted 3 lines
* The bind command was not available on my default configuration, making it even difficult for people unaware that this command is now required to fix their common commands.
Yes, we'll need to make that default y if
USB_ETHER.Agreed.
Quoted 11 lines
Quoted 10 lines
* Any command that expects the
usb_etherdriver will now fail badly even after the bind call:=> bind /ocp/usb@47400000/usb@47401000
usb_ether
=> fastboot usb 0
couldn't find an available UDCg_dnl_register: failed!, error: -19
exit not allowed from main input shell.
=> tftp0x81000000zImagedev_get_priv: null deviceQuoted 4 lines
Well, does it work if you do:
bind /ocp/usb@47400000/usb@47401000usb_ether
tftp0x81000000zImage
?No, I already tried both:
U-Boot SPL 2023.07-00806-gac80e6de9cf (Jul 23 2023 - 19:45:51 +0200) Trying to boot from MMC2
U-Boot 2023.07-00806-gac80e6de9cf (Jul 23 2023 - 19:45:51 +0200)
CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB Core: 160 devices, 18 uclasses, devicetree: separate WDT: Started wdt@44e35000 with servicing every 1000ms (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1Loading Environment from FAT... Unable to read "uboot.env" from mmc1:1... <ethaddr> not set. Validating first E-fuse MAC
Net: Could not get PHY for ethernet@4a100000: addr 0
eth2: ethernet@4a100000using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
, eth3:usb_ether
=> bind /ocp/usb@47400000/usb@47401000usb_ether
=> tftp0x81000000zImagedev_get_priv: null device
data abortpc : [<9ffa04ba>] lr : [<9ff86d5f>]
Quoted 8 lines
reloc pc : [<
8083b4ba>] lr : [<80821d5f>]
sp :9df2f920ip : 00000000 fp : 00000003
r10:9df4cf48r9 :9df44ea0r8 :9ffec33c
r7 :0000538cr6 : 00000000 r5 :00000bb8r4 :9df4d3c0
r3 :9ff97653r2 :fff69249r1 : 00000000 r0 : 00000000
Flags: nzcv IRQs off FIQs on ModeSVC_32(T)Code: 9ffd b508 f7e6 fc4b (6801) 2000Resetting CPU ...
I had talked with Marek a bit on IRC as well and found that yes, there's some additional problem seemingly with MUSB. Perhaps you can debug what's going on here?
Signature · 1 line
Tom