ARM: dts: BCM53573: Add Ethernet interfaces links
Subsystems (2)
PATCH 1/1 ARM: dts: BCM53573: Add Ethernet interfaces links
From: Rafał Miłecki <[email protected]>
BCM53573 has 2 Ethernet interfaces each connected to one of switch ports in the default design. They both use fixed links.
An exception are Luxul XAP devices that have switch replaced by a single PHY.
Signed-off-by Rafał Miłecki <[email protected]>
--- .../boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 2 ++ .../arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts | 2 ++ arch/arm/boot/dts/broadcom/bcm53573.dtsi | 12 ++++++++++++ 3 files changed, 16 insertions(+)
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts +2 -0
@@ -50,6 +50,8 @@ &gmac0 { phy-mode = "rgmii"; phy-handle = <&bcm54210e>; + /delete-node/ fixed-link; + mdio { /delete-node/ switch@1e;
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts +2 -0
@@ -86,6 +86,8 @@ &gmac0 { phy-mode = "rgmii"; phy-handle = <&bcm54210e>; + /delete-node/ fixed-link; + mdio { /delete-node/ switch@1e;
arch/arm/boot/dts/broadcom/bcm53573.dtsi +12 -0
@@ -181,6 +181,12 @@ ohci_port2: port@2 { gmac0: ethernet@5000 { reg = <0x5000 0x1000>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; mdio { #address-cells = <1>;
@@ -237,6 +243,12 @@ port@8 { gmac1: ethernet@b000 { reg = <0xb000 0x1000>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; }; pmu@12000 {
Signature · 1 line
2.35.3
From: Florian Fainelli <[email protected]>
Quoted 10 lines · Rafał Miłecki
From: Rafał Miłecki <[email protected]>
BCM53573 has 2 Ethernet interfaces each connected to one of switch ports in the default design. They both use fixed links.
An exception are Luxul XAP devices that have switch replaced by a single PHY.
Signed-off-by Rafał Miłecki <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks! --
Florian