Skip to contentSkip to conversation

Add support for PMICs used on Tegra 3 devices

PATCH Superseded Svyatoslav Ryhel 1 participant 8 messages Jul 24, 2023

v4 of 9 Superseded Latest is v9 →

lore
Share & tools
lore
#0 lore raw

v4 cover Add support for PMICs used on Tegra 3 devices

Patch set adds basic support for PMICs used in many Tegra 3 devices. All PMIC drivers are based on datasheets provided by vendors. Implemented API include regulator set/get voltage enable/disable and basic PMIC r/w capabilities.

Drivers were tested by me on LG P895 (max77663), HTC One X (TPS80032) and ASUS TF300T (tps65911). Calculations and behavior were correct, predictable and reproducible.

Poweroff functional will be added after this basic drivers are merged.

---
Changes from v3:
- expanded descriptions in Kconfigs for pmics and regulators
- replaced ret with other variable name if it is not used for return
- dropped prefixed with pmic name
- dropped () in ~(var) type expressions
- return dm_i2c_* output in pmic_read/write functions
- switched to log_debug in some places
- added descryptions for some "non obvious" functions
- fixed tps80031 spms voltage calculation in non linear region
- adjsuted tps65911 vio voltage calculation

Changes from v2:
- removed all previously made poweroff API in favour to use sysreset after this patchset is accepted

Changes from v1:
- created poweroff API for PMIC and integrated it call into do_poweroff
- added poweroff function to submitted max77663, tps80032 and tps65911 drivers
- fixed registers asignments for regulators with non-numeric name (ldoln, ldousb, vddctrl)
---

Svyatoslav Ryhel (7):
power: pmic: palmas: support TI TPS65913 PMIC
power: pmic: add the base MAX77663 PMIC support
power: regulator: max77663: add regulator support
power: pmic: add the base TPS80031 PMIC support
power: regulator: tps80031: add regulator support
power: pmic: tps65910: add TPS65911 PMIC support
power: regulator: tps65911: add regulator support

 doc/device-tree-bindings/pmic/max77663.txt   |  84 ++++
 doc/device-tree-bindings/pmic/tps65911.txt   |  78 ++++
 doc/device-tree-bindings/pmic/tps80031.txt   |  76 ++++
 drivers/power/pmic/Kconfig                   |  20 +
 drivers/power/pmic/Makefile                  |   2 +
 drivers/power/pmic/max77663.c                |  86 ++++
 drivers/power/pmic/palmas.c                  |   1 +
 drivers/power/pmic/pmic_tps65910_dm.c        |  26 +-
 drivers/power/pmic/tps80031.c                |  87 ++++
 drivers/power/regulator/Kconfig              |  28 ++
 drivers/power/regulator/Makefile             |   3 +
 drivers/power/regulator/max77663_regulator.c | 378 ++++++++++++++++++
 drivers/power/regulator/tps65911_regulator.c | 397 +++++++++++++++++++
 drivers/power/regulator/tps80031_regulator.c | 343 ++++++++++++++++
 include/power/max77663.h                     |  42 ++
 include/power/tps65910_pmic.h                |  47 +++
 include/power/tps80031.h                     |  45 +++
 17 files changed, 1740 insertions(+), 3 deletions(-)
 create mode 100644 doc/device-tree-bindings/pmic/max77663.txt
 create mode 100644 doc/device-tree-bindings/pmic/tps65911.txt
 create mode 100644 doc/device-tree-bindings/pmic/tps80031.txt
 create mode 100644 drivers/power/pmic/max77663.c
 create mode 100644 drivers/power/pmic/tps80031.c
 create mode 100644 drivers/power/regulator/max77663_regulator.c
 create mode 100644 drivers/power/regulator/tps65911_regulator.c
 create mode 100644 drivers/power/regulator/tps80031_regulator.c
 create mode 100644 include/power/max77663.h
 create mode 100644 include/power/tps80031.h
Signature · 1 line
2.39.2
#1 lore raw

PATCH v4 1/7 power: pmic: palmas: support TI TPS65913 PMIC

Existing PALMAS PMIC driver is fully compatible with TI TPS65913 PMIC found in many Tegra 4 devices, like Tegra Note 7 and ASUS TF701T. TPS65913 shares same structure of regulators like TPS659038 so data can be reused.

---
 drivers/power/pmic/palmas.c | 1 +
 1 file changed, 1 insertion(+)
drivers/power/pmic/palmas.c +1 -0
index 6080cbff0b..d6eb9cb433 100644
@@ -87,6 +87,7 @@ static struct dm_pmic_ops palmas_ops = {
 
 static const struct udevice_id palmas_ids[] = {
 	{ .compatible = "ti,tps659038", .data = TPS659038 },
+	{ .compatible = "ti,tps65913" , .data = TPS659038 },
 	{ .compatible = "ti,tps65917" , .data = TPS65917 },
 	{ }
 };
Signature · 1 line
2.39.2
#2 lore raw

PATCH v4 2/7 power: pmic: add the base MAX77663 PMIC support

In reply to Svyatoslav Ryhel

Add support to bind the regulators/child nodes with the pmic. Also adds the pmic i2c based read/write functions to access pmic registers.

---
 doc/device-tree-bindings/pmic/max77663.txt | 84 +++++++++++++++++++++
 drivers/power/pmic/Kconfig                 |  9 +++
 drivers/power/pmic/Makefile                |  1 +
 drivers/power/pmic/max77663.c              | 86 ++++++++++++++++++++++
 include/power/max77663.h                   | 42 +++++++++++
 5 files changed, 222 insertions(+)
 create mode 100644 doc/device-tree-bindings/pmic/max77663.txt
 create mode 100644 drivers/power/pmic/max77663.c
 create mode 100644 include/power/max77663.h
doc/device-tree-bindings/pmic/max77663.txt new file +84 -0
new file mode 100644
index 0000000000..ddb7d3eb14
@@ -0,0 +1,84 @@
+MAXIM, MAX77663 PMIC
+
+This device uses two drivers:
+- drivers/power/pmic/max77663.c (for parent device)
+- drivers/power/regulator/max77663_regulator.c (for child regulators)
+
+This chapter describes the binding info for the PMIC driver and regulators.
+
+Required properties for PMIC:
+- compatible: "maxim,max77663"
+- reg: usually 0x1c or 0x3c
+
+With those two properties, the pmic device can be used for read/write only.
+To bind each regulator, the optional regulators subnode should exists.
+
+Optional subnode:
+- name: regulators (subnode list of each device's regulator)
+
+Regulators subnode contains set on supported regulators.
+
+Required properties:
+- regulator-name: used for regulator uclass platform data '.name',
+
+List of supported regulator nodes names for max77663:
+- sd0, sd1, sd2, sd3, ldo0, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8
+
+Optional:
+- regulator-min-microvolt: minimum allowed Voltage to set
+- regulator-max-microvolt: minimum allowed Voltage to set
+- regulator-always-on: regulator should be never disabled
+- regulator-boot-on: regulator should be enabled by the bootloader
+
+Linux driver binding for this driver is compatible.
+
+Example:
+
+max77663@1c {
+	compatible = "maxim,max77663";
+	reg = <0x1c>;
+
+	regulators {
+		sd0 {
+			regulator-name = "vdd_cpu";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		...
+
+		ldo0 {
+			regulator-name = "avdd_pll";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		...
+
+		ldo2 {
+			regulator-name = "avdd_usb";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo3 {
+			regulator-name = "vdd_sdmmc3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		...
+
+		ldo8 {
+			regulator-name = "avdd_dsi_csi";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+	};
+};
drivers/power/pmic/Kconfig +9 -0
index 176fb07c65..b2a5e71a87 100644
@@ -184,6 +184,15 @@ config SPL_DM_PMIC_PFUZE100
 	This config enables implementation of driver-model pmic uclass features
 	for PMIC PFUZE100 in SPL. The driver implements read/write operations.
 
+config DM_PMIC_MAX77663
+	bool "Enable Driver Model for PMIC MAX77663"
+	---help---
+	This config enables implementation of driver-model pmic uclass features
+	for PMIC MAX77663. The driver implements read/write operations.
+	This is a Power Management IC with a decent set of peripherals from which
+	4 DC-to-DC Step-Down (SD) Regulators, 9 Low-Dropout Linear (LDO) Regulators,
+	8 GPIOs, Real-Time Clock (RTC) and more with I2C Compatible Interface.
+
 config DM_PMIC_MAX77686
 	bool "Enable Driver Model for PMIC MAX77686"
 	---help---
drivers/power/pmic/Makefile +1 -0
index 0b3b3d62d0..414a9d8225 100644
@@ -6,6 +6,7 @@
 obj-$(CONFIG_$(SPL_TPL_)DM_PMIC) += pmic-uclass.o
 obj-$(CONFIG_$(SPL_)DM_PMIC_FAN53555) += fan53555.o
 obj-$(CONFIG_$(SPL_)DM_PMIC_DA9063) += da9063.o
+obj-$(CONFIG_$(SPL_)DM_PMIC_MAX77663) += max77663.o
 obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o
 obj-$(CONFIG_DM_PMIC_MAX8998) += max8998.o
 obj-$(CONFIG_DM_PMIC_MC34708) += mc34708.o
drivers/power/pmic/max77663.c new file +86 -0

86 lines not on this page · raw message

include/power/max77663.h new file +42 -0

42 lines not on this page · raw message

Signature · 1 line
2.39.2
#3 lore raw

PATCH v4 3/7 power: regulator: max77663: add regulator support

In reply to Svyatoslav Ryhel

The driver provides regulator set/get voltage enable/disable functions for MAXIM MAX77663 PMICs.

---
 drivers/power/regulator/Kconfig              |   9 +
 drivers/power/regulator/Makefile             |   1 +
 drivers/power/regulator/max77663_regulator.c | 378 +++++++++++++++++++
 3 files changed, 388 insertions(+)
 create mode 100644 drivers/power/regulator/max77663_regulator.c
drivers/power/regulator/Kconfig +9 -0
index eb5aa38c1c..581816294c 100644
@@ -141,6 +141,15 @@ config SPL_REGULATOR_PWM
 	  This config enables implementation of driver-model regulator uclass
 	  features for PWM regulators in SPL.
 
+config DM_REGULATOR_MAX77663
+	bool "Enable Driver Model for REGULATOR MAX77663"
+	depends on DM_REGULATOR && DM_PMIC_MAX77663
+	---help---
+	This config enables implementation of driver-model regulator uclass
+	features for REGULATOR MAX77663. The driver supports both DC-to-DC
+	Step-Down (SD) Regulators and Low-Dropout Linear (LDO) Regulators
+	found in MAX77663 PMIC and implements get/set api for value and enable.
+
 config DM_REGULATOR_MAX77686
 	bool "Enable Driver Model for REGULATOR MAX77686"
 	depends on DM_REGULATOR && DM_PMIC_MAX77686
drivers/power/regulator/Makefile +1 -0
index d9e0cd5949..8d73169b50 100644
@@ -10,6 +10,7 @@ obj-$(CONFIG_REGULATOR_AS3722)	+= as3722_regulator.o
 obj-$(CONFIG_$(SPL_)REGULATOR_AXP) += axp_regulator.o
 obj-$(CONFIG_$(SPL_)REGULATOR_AXP_USB_POWER) += axp_usb_power.o
 obj-$(CONFIG_$(SPL_)DM_REGULATOR_DA9063) += da9063.o
+obj-$(CONFIG_$(SPL_)DM_REGULATOR_MAX77663) += max77663_regulator.o
 obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o
 obj-$(CONFIG_DM_REGULATOR_NPCM8XX) += npcm8xx_regulator.o
 obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
drivers/power/regulator/max77663_regulator.c new file +378 -0

378 lines not on this page · raw message

Signature · 1 line
2.39.2
#4 lore raw

PATCH v4 4/7 power: pmic: add the base TPS80031 PMIC support

In reply to Svyatoslav Ryhel

Add support to bind the regulators/child nodes with the pmic. Also adds the pmic i2c based read/write functions to access pmic registers.

---
 doc/device-tree-bindings/pmic/tps80031.txt | 76 +++++++++++++++++++
 drivers/power/pmic/Kconfig                 | 11 +++
 drivers/power/pmic/Makefile                |  1 +
 drivers/power/pmic/tps80031.c              | 87 ++++++++++++++++++++++
 include/power/tps80031.h                   | 45 +++++++++++
 5 files changed, 220 insertions(+)
 create mode 100644 doc/device-tree-bindings/pmic/tps80031.txt
 create mode 100644 drivers/power/pmic/tps80031.c
 create mode 100644 include/power/tps80031.h
doc/device-tree-bindings/pmic/tps80031.txt new file +76 -0
new file mode 100644
index 0000000000..577e6de1c1
@@ -0,0 +1,76 @@
+Texas Instruments, TPS80031/TPS80032 PMIC
+
+This device uses two drivers:
+- drivers/power/pmic/tps80031.c (for parent device)
+- drivers/power/regulator/tps80031_regulator.c (for child regulators)
+
+This chapter describes the binding info for the PMIC driver and regulators.
+
+Required properties for PMIC:
+- compatible: "ti,tps80031" or "ti,tps80032"
+- reg: 0x48
+
+With those two properties, the pmic device can be used for read/write only.
+To bind each regulator, the optional regulators subnode should exists.
+
+Optional subnode:
+- name: regulators (subnode list of each device's regulator)
+
+Regulators subnode contains set on supported regulators.
+
+Required properties:
+- regulator-name: used for regulator uclass platform data '.name',
+
+List of supported regulator nodes names for tps80031/tps80032:
+- smps1, smps2, smps3, smps4, smps5
+- ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldoln, ldousb
+
+SMPS5 in Linux 3.1.10 is referred as vio, but datasheet clearly names it SMPS5.
+
+Optional:
+- regulator-min-microvolt: minimum allowed Voltage to set
+- regulator-max-microvolt: minimum allowed Voltage to set
+- regulator-always-on: regulator should be never disabled
+- regulator-boot-on: regulator should be enabled by the bootloader
+
+Example:
+
+tps80032@48 {
+	compatible = "ti,tps80032";
+	reg = <0x48>;
+
+	regulators {
+		smps1 {
+			regulator-name = "vdd_cpu";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		...
+
+		smps5 {
+			regulator-name = "vdd_1v8_gen";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo1 {
+			regulator-name = "avdd_dsi_csi";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-boot-on;
+		};
+
+		...
+
+		ldousb {
+			regulator-name = "avdd_usb";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+};
drivers/power/pmic/Kconfig +11 -0
index b2a5e71a87..df42f2fa2f 100644
@@ -350,6 +350,17 @@ config DM_PMIC_TPS65910
 	DC-DC converter, 8 LDOs and a RTC. This driver binds the SMPS and LDO
 	pmic children.
 
+config DM_PMIC_TPS80031
+	bool "Enable driver for Texas Instruments TPS80031/TPS80032 PMIC"
+	---help---
+	This config enables implementation of driver-model pmic uclass features
+	for TPS80031/TPS80032 PMICs. The driver implements read/write operations.
+	This is a Power Management IC with a decent set of peripherals from which
+	5 Buck Converters refered as Switched-mode power supply (SMPS), 11 General-
+	Purpose Low-Dropout Voltage Regulators (LDO), USB OTG Module, Real-Time
+	Clock (RTC) with Timer and Alarm Wake-Up, Two Digital PWM Outputs and more
+	with I2C Compatible Interface. PMIC occupies 4 I2C addresses.
+
 config PMIC_STPMIC1
 	bool "Enable support for STMicroelectronics STPMIC1 PMIC"
 	depends on DM_I2C
drivers/power/pmic/Makefile +1 -0
index 414a9d8225..55ee614364 100644
@@ -27,6 +27,7 @@ obj-$(CONFIG_$(SPL_)PMIC_RN5T567) += rn5t567.o
 obj-$(CONFIG_PMIC_TPS65090) += tps65090.o
 obj-$(CONFIG_PMIC_S5M8767) += s5m8767.o
 obj-$(CONFIG_DM_PMIC_TPS65910) += pmic_tps65910_dm.o
+obj-$(CONFIG_$(SPL_)DM_PMIC_TPS80031) += tps80031.o
 obj-$(CONFIG_$(SPL_)PMIC_PALMAS) += palmas.o
 obj-$(CONFIG_$(SPL_)PMIC_LP873X) += lp873x.o
 obj-$(CONFIG_$(SPL_)PMIC_LP87565) += lp87565.o
drivers/power/pmic/tps80031.c new file +87 -0

87 lines not on this page · raw message

include/power/tps80031.h new file +45 -0

45 lines not on this page · raw message

Signature · 1 line
2.39.2
#5 lore raw

PATCH v4 5/7 power: regulator: tps80031: add regulator support

In reply to Svyatoslav Ryhel

The driver provides regulator set/get voltage enable/disable functions for TI TPS80031/TPS80032 PMICs.

---
 drivers/power/regulator/Kconfig              |   8 +
 drivers/power/regulator/Makefile             |   1 +
 drivers/power/regulator/tps80031_regulator.c | 343 +++++++++++++++++++
 3 files changed, 352 insertions(+)
 create mode 100644 drivers/power/regulator/tps80031_regulator.c
drivers/power/regulator/Kconfig +8 -0
index 581816294c..6454c54855 100644
@@ -356,6 +356,14 @@ config DM_REGULATOR_TPS62360
 	implements the get/set api for value only, as the power line is
 	always on.
 
+config DM_REGULATOR_TPS80031
+	bool "Enable driver for TPS80031/TPS80032 PMIC regulators"
+	depends on DM_PMIC_TPS80031
+	---help---
+	This enables implementation of driver-model regulator uclass
+	features for TPS80031/TPS80032 PMICs. The driver implements
+	get/set api for: value and enable.
+
 config DM_REGULATOR_STPMIC1
 	bool "Enable driver for STPMIC1 regulators"
 	depends on DM_REGULATOR && PMIC_STPMIC1
drivers/power/regulator/Makefile +1 -0
index 8d73169b50..3ef55dc534 100644
@@ -33,6 +33,7 @@ obj-$(CONFIG_$(SPL_)DM_REGULATOR_LP87565) += lp87565_regulator.o
 obj-$(CONFIG_$(SPL_)DM_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
 obj-$(CONFIG_DM_REGULATOR_TPS65910) += tps65910_regulator.o
 obj-$(CONFIG_DM_REGULATOR_TPS62360) += tps62360_regulator.o
+obj-$(CONFIG_$(SPL_)DM_REGULATOR_TPS80031) += tps80031_regulator.o
 obj-$(CONFIG_$(SPL_)DM_REGULATOR_STPMIC1) += stpmic1.o
 obj-$(CONFIG_DM_REGULATOR_TPS65941) += tps65941_regulator.o
 obj-$(CONFIG_DM_REGULATOR_SCMI) += scmi_regulator.o
drivers/power/regulator/tps80031_regulator.c new file +343 -0

343 lines not on this page · raw message

Signature · 1 line
2.39.2
#6 lore raw

PATCH v4 6/7 power: pmic: tps65910: add TPS65911 PMIC support

In reply to Svyatoslav Ryhel

Add support to bind the regulators/child nodes with the pmic. Also adds the pmic i2c based read/write functions to access pmic registers.

---
 doc/device-tree-bindings/pmic/tps65911.txt | 78 ++++++++++++++++++++++
 drivers/power/pmic/pmic_tps65910_dm.c      | 26 +++++++-
 include/power/tps65910_pmic.h              | 47 +++++++++++++
 3 files changed, 148 insertions(+), 3 deletions(-)
 create mode 100644 doc/device-tree-bindings/pmic/tps65911.txt
doc/device-tree-bindings/pmic/tps65911.txt new file +78 -0
new file mode 100644
index 0000000000..29270efbfe
@@ -0,0 +1,78 @@
+Texas Instruments, TPS65911 PMIC
+
+This device uses two drivers:
+- drivers/power/pmic/tps65910.c (for parent device)
+- drivers/power/regulator/tps65911_regulator.c (for child regulators)
+
+This chapter describes the binding info for the PMIC driver and regulators.
+
+Required properties for PMIC:
+- compatible: "ti,tps65911"
+- reg: 0x2d
+
+With those two properties, the pmic device can be used for read/write only.
+To bind each regulator, the optional regulators subnode should exists.
+
+Optional subnode:
+- name: regulators (subnode list of each device's regulator)
+
+Regulators subnode contains set on supported regulators.
+
+Required properties:
+- regulator-name: used for regulator uclass platform data '.name',
+
+List of supported regulator nodes names for tps65911:
+- vdd1, vdd2, vddctrl, vddio
+- ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8
+
+vddio in datasheet is referred as vio, but for reduction of code and
+unification of smps regulators it is named vddio.
+
+Optional:
+- regulator-min-microvolt: minimum allowed Voltage to set
+- regulator-max-microvolt: minimum allowed Voltage to set
+- regulator-always-on: regulator should be never disabled
+- regulator-boot-on: regulator should be enabled by the bootloader
+
+Example:
+
+tps65911@2d {
+	compatible = "ti,tps65911";
+	reg = <0x2d>;
+
+	regulators {
+		vdd1 {
+			regulator-name = "vdd_1v2_backlight";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		...
+
+		vddio {
+			regulator-name = "vdd_1v8_gen";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo1 {
+			regulator-name = "vdd_emmc_core";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		...
+
+		ldo8 {
+			regulator-name = "vdd_ddr_hs";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+	};
+};
drivers/power/pmic/pmic_tps65910_dm.c +23 -3
index e03ddc98d7..ff63c502d0 100644
@@ -11,13 +11,19 @@
 #include <power/regulator.h>
 #include <power/tps65910_pmic.h>
 
-static const struct pmic_child_info pmic_children_info[] = {
+static const struct pmic_child_info tps65910_children_info[] = {
 	{ .prefix = "ldo_", .driver = TPS65910_LDO_DRIVER },
 	{ .prefix = "buck_", .driver = TPS65910_BUCK_DRIVER },
 	{ .prefix = "boost_", .driver = TPS65910_BOOST_DRIVER },
 	{ },
 };
 
+static const struct pmic_child_info tps65911_children_info[] = {
+	{ .prefix = "ldo", .driver = TPS65911_LDO_DRIVER },
+	{ .prefix = "vdd", .driver = TPS65911_VDD_DRIVER },
+	{ },
+};
+
 static int pmic_tps65910_reg_count(struct udevice *dev)
 {
 	return TPS65910_NUM_REGS;
@@ -51,6 +57,7 @@ static int pmic_tps65910_bind(struct udevice *dev)
 {
 	ofnode regulators_node;
 	int children;
+	int type = dev_get_driver_data(dev);
 
 	regulators_node = dev_read_subnode(dev, "regulators");
 	if (!ofnode_valid(regulators_node)) {
@@ -58,7 +65,19 @@ static int pmic_tps65910_bind(struct udevice *dev)
 		return -EINVAL;
 	}
 
-	children = pmic_bind_children(dev, regulators_node, pmic_children_info);
+	switch (type) {
+	case TPS65910:
+		children = pmic_bind_children(dev, regulators_node,
+					      tps65910_children_info);
+		break;
+	case TPS65911:
+		children = pmic_bind_children(dev, regulators_node,
+					      tps65911_children_info);
+		break;
+	default:
+		log_err("unknown PMIC type\n");
+	}
+
 	if (!children)
 		debug("%s has no children (regulators)\n", dev->name);
 
@@ -82,7 +101,8 @@ static struct dm_pmic_ops pmic_tps65910_ops = {
 };
 
 static const struct udevice_id pmic_tps65910_match[] = {
-	{ .compatible = "ti,tps65910" },
+	{ .compatible = "ti,tps65910", .data = TPS65910 },
+	{ .compatible = "ti,tps65911", .data = TPS65911 },
 	{ /* sentinel */ }
 };
 
include/power/tps65910_pmic.h +47 -0

57 lines not on this page · raw message

Signature · 1 line
2.39.2
#7 lore raw

PATCH v4 7/7 power: regulator: tps65911: add regulator support

In reply to Svyatoslav Ryhel

The driver provides regulator set/get voltage enable/disable functions for TI TPS5911 PMIC.

---
 drivers/power/regulator/Kconfig              |  11 +
 drivers/power/regulator/Makefile             |   1 +
 drivers/power/regulator/tps65911_regulator.c | 397 +++++++++++++++++++
 3 files changed, 409 insertions(+)
 create mode 100644 drivers/power/regulator/tps65911_regulator.c
drivers/power/regulator/Kconfig +11 -0
index 6454c54855..102ec7bc5f 100644
@@ -346,6 +346,17 @@ config DM_REGULATOR_TPS65910
 	regulator types of the TPS65910 (BUCK, BOOST and LDO). It implements
 	the get/set api for value and enable.
 
+config DM_REGULATOR_TPS65911
+	bool "Enable driver for TPS65911 PMIC regulators"
+	depends on DM_PMIC_TPS65910
+	---help---
+	This config enables implementation of driver-model regulator
+	uclass features for the TPS65911 PMIC. The driver supports Step-Down
+	DC-DC Converters for Processor Cores (VDD1 and VDD2), Step-Down DC-DC
+	Converter for I/O Power (VIO), Controller for External FETs (VDDCtrl)
+	and LDO Voltage Regulators found in TPS65911 PMIC and implements
+	get/set api for value and enable.
+
 config DM_REGULATOR_TPS62360
 	bool "Enable driver for TPS6236x Power Regulator"
 	depends on DM_REGULATOR
drivers/power/regulator/Makefile +1 -0
index 3ef55dc534..f79932d833 100644
@@ -32,6 +32,7 @@ obj-$(CONFIG_$(SPL_)DM_REGULATOR_LP873X) += lp873x_regulator.o
 obj-$(CONFIG_$(SPL_)DM_REGULATOR_LP87565) += lp87565_regulator.o
 obj-$(CONFIG_$(SPL_)DM_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
 obj-$(CONFIG_DM_REGULATOR_TPS65910) += tps65910_regulator.o
+obj-$(CONFIG_$(SPL_)DM_REGULATOR_TPS65911) += tps65911_regulator.o
 obj-$(CONFIG_DM_REGULATOR_TPS62360) += tps62360_regulator.o
 obj-$(CONFIG_$(SPL_)DM_REGULATOR_TPS80031) += tps80031_regulator.o
 obj-$(CONFIG_$(SPL_)DM_REGULATOR_STPMIC1) += stpmic1.o
drivers/power/regulator/tps65911_regulator.c new file +397 -0

397 lines not on this page · raw message

Signature · 1 line
2.39.2